[pf3gnuchains/gcc-fork.git] / gcc / ada / gcc-interface / utils.c

/****************************************************************************
 *                                                                          *
 *                         GNAT COMPILER COMPONENTS                         *
 *                                                                          *
 *                                U T I L S                                 *
 *                                                                          *
 *                          C Implementation File                           *
 *                                                                          *
 *          Copyright (C) 1992-2009, Free Software Foundation, Inc.         *
 *                                                                          *
 * GNAT is free software;  you can  redistribute it  and/or modify it under *
 * terms of the  GNU General Public License as published  by the Free Soft- *
 * ware  Foundation;  either version 3,  or (at your option) any later ver- *
 * sion.  GNAT is distributed in the hope that it will be useful, but WITH- *
 * OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY *
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License *
 * for  more details.  You should have received a copy of the GNU General   *
 * Public License along with GCC; see the file COPYING3.  If not see        *
 * <http://www.gnu.org/licenses/>.                                          *
 *                                                                          *
 * GNAT was originally developed  by the GNAT team at  New York University. *
 * Extensive contributions were provided by Ada Core Technologies Inc.      *
 *                                                                          *
 ****************************************************************************/

#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "tree.h"
#include "flags.h"
#include "toplev.h"
#include "rtl.h"
#include "output.h"
#include "ggc.h"
#include "debug.h"
#include "convert.h"
#include "target.h"
#include "function.h"
#include "langhooks.h"
#include "pointer-set.h"
#include "cgraph.h"
#include "tree-dump.h"
#include "tree-inline.h"
#include "tree-iterator.h"
#include "gimple.h"

#include "ada.h"
#include "types.h"
#include "atree.h"
#include "elists.h"
#include "namet.h"
#include "nlists.h"
#include "stringt.h"
#include "uintp.h"
#include "fe.h"
#include "sinfo.h"
#include "einfo.h"
#include "ada-tree.h"
#include "gigi.h"

#ifndef MAX_BITS_PER_WORD
#define MAX_BITS_PER_WORD  BITS_PER_WORD
#endif

/* If nonzero, pretend we are allocating at global level.  */
int force_global;

/* The default alignment of "double" floating-point types, i.e. floating
   point types whose size is equal to 64 bits, or 0 if this alignment is
   not specifically capped.  */
int double_float_alignment;

/* The default alignment of "double" or larger scalar types, i.e. scalar
   types whose size is greater or equal to 64 bits, or 0 if this alignment
   is not specifically capped.  */
int double_scalar_alignment;

/* Tree nodes for the various types and decls we create.  */
tree gnat_std_decls[(int) ADT_LAST];

/* Functions to call for each of the possible raise reasons.  */
tree gnat_raise_decls[(int) LAST_REASON_CODE + 1];

/* Forward declarations for handlers of attributes.  */
static tree handle_const_attribute (tree *, tree, tree, int, bool *);
static tree handle_nothrow_attribute (tree *, tree, tree, int, bool *);
static tree handle_pure_attribute (tree *, tree, tree, int, bool *);
static tree handle_novops_attribute (tree *, tree, tree, int, bool *);
static tree handle_nonnull_attribute (tree *, tree, tree, int, bool *);
static tree handle_sentinel_attribute (tree *, tree, tree, int, bool *);
static tree handle_noreturn_attribute (tree *, tree, tree, int, bool *);
static tree handle_malloc_attribute (tree *, tree, tree, int, bool *);
static tree handle_type_generic_attribute (tree *, tree, tree, int, bool *);
static tree handle_vector_size_attribute (tree *, tree, tree, int, bool *);
static tree handle_vector_type_attribute (tree *, tree, tree, int, bool *);

/* Fake handler for attributes we don't properly support, typically because
   they'd require dragging a lot of the common-c front-end circuitry.  */
static tree fake_attribute_handler      (tree *, tree, tree, int, bool *);

/* Table of machine-independent internal attributes for Ada.  We support
   this minimal set of attributes to accommodate the needs of builtins.  */
const struct attribute_spec gnat_internal_attribute_table[] =
{
  /* { name, min_len, max_len, decl_req, type_req, fn_type_req, handler } */
  { "const",        0, 0,  true,  false, false, handle_const_attribute   },
  { "nothrow",      0, 0,  true,  false, false, handle_nothrow_attribute },
  { "pure",         0, 0,  true,  false, false, handle_pure_attribute },
  { "no vops",      0, 0,  true,  false, false, handle_novops_attribute },
  { "nonnull",      0, -1, false, true,  true,  handle_nonnull_attribute },
  { "sentinel",     0, 1,  false, true,  true,  handle_sentinel_attribute },
  { "noreturn",     0, 0,  true,  false, false, handle_noreturn_attribute },
  { "malloc",       0, 0,  true,  false, false, handle_malloc_attribute },
  { "type generic", 0, 0,  false, true, true, handle_type_generic_attribute },

  { "vector_size",  1, 1,  false, true, false,  handle_vector_size_attribute },
  { "vector_type",  0, 0,  false, true, false,  handle_vector_type_attribute },
  { "may_alias",    0, 0, false, true, false, NULL },

  /* ??? format and format_arg are heavy and not supported, which actually
     prevents support for stdio builtins, which we however declare as part
     of the common builtins.def contents.  */
  { "format",     3, 3,  false, true,  true,  fake_attribute_handler },
  { "format_arg", 1, 1,  false, true,  true,  fake_attribute_handler },

  { NULL,         0, 0, false, false, false, NULL }
};

/* Associates a GNAT tree node to a GCC tree node. It is used in
   `save_gnu_tree', `get_gnu_tree' and `present_gnu_tree'. See documentation
   of `save_gnu_tree' for more info.  */
static GTY((length ("max_gnat_nodes"))) tree *associate_gnat_to_gnu;

#define GET_GNU_TREE(GNAT_ENTITY)       \
  associate_gnat_to_gnu[(GNAT_ENTITY) - First_Node_Id]

#define SET_GNU_TREE(GNAT_ENTITY,VAL)   \
  associate_gnat_to_gnu[(GNAT_ENTITY) - First_Node_Id] = (VAL)

#define PRESENT_GNU_TREE(GNAT_ENTITY)   \
  (associate_gnat_to_gnu[(GNAT_ENTITY) - First_Node_Id] != NULL_TREE)

/* Associates a GNAT entity to a GCC tree node used as a dummy, if any.  */
static GTY((length ("max_gnat_nodes"))) tree *dummy_node_table;

#define GET_DUMMY_NODE(GNAT_ENTITY)     \
  dummy_node_table[(GNAT_ENTITY) - First_Node_Id]

#define SET_DUMMY_NODE(GNAT_ENTITY,VAL) \
  dummy_node_table[(GNAT_ENTITY) - First_Node_Id] = (VAL)

#define PRESENT_DUMMY_NODE(GNAT_ENTITY) \
  (dummy_node_table[(GNAT_ENTITY) - First_Node_Id] != NULL_TREE)

/* This variable keeps a table for types for each precision so that we only
   allocate each of them once. Signed and unsigned types are kept separate.

   Note that these types are only used when fold-const requests something
   special.  Perhaps we should NOT share these types; we'll see how it
   goes later.  */
static GTY(()) tree signed_and_unsigned_types[2 * MAX_BITS_PER_WORD + 1][2];

/* Likewise for float types, but record these by mode.  */
static GTY(()) tree float_types[NUM_MACHINE_MODES];

/* For each binding contour we allocate a binding_level structure to indicate
   the binding depth.  */

struct GTY((chain_next ("%h.chain"))) gnat_binding_level {
  /* The binding level containing this one (the enclosing binding level). */
  struct gnat_binding_level *chain;
  /* The BLOCK node for this level.  */
  tree block;
  /* If nonzero, the setjmp buffer that needs to be updated for any
     variable-sized definition within this context.  */
  tree jmpbuf_decl;
};

/* The binding level currently in effect.  */
static GTY(()) struct gnat_binding_level *current_binding_level;

/* A chain of gnat_binding_level structures awaiting reuse.  */
static GTY((deletable)) struct gnat_binding_level *free_binding_level;

/* An array of global declarations.  */
static GTY(()) VEC(tree,gc) *global_decls;

/* An array of builtin function declarations.  */
static GTY(()) VEC(tree,gc) *builtin_decls;

/* An array of global renaming pointers.  */
static GTY(()) VEC(tree,gc) *global_renaming_pointers;

/* A chain of unused BLOCK nodes. */
static GTY((deletable)) tree free_block_chain;

static tree merge_sizes (tree, tree, tree, bool, bool);
static tree compute_related_constant (tree, tree);
static tree split_plus (tree, tree *);
static tree float_type_for_precision (int, enum machine_mode);
static tree convert_to_fat_pointer (tree, tree);
static tree convert_to_thin_pointer (tree, tree);
static tree make_descriptor_field (const char *,tree, tree, tree);
static bool potential_alignment_gap (tree, tree, tree);
\f
/* Initialize the association of GNAT nodes to GCC trees.  */

void
init_gnat_to_gnu (void)
{
  associate_gnat_to_gnu
    = (tree *) ggc_alloc_cleared (max_gnat_nodes * sizeof (tree));
}

/* GNAT_ENTITY is a GNAT tree node for an entity.   GNU_DECL is the GCC tree
   which is to be associated with GNAT_ENTITY. Such GCC tree node is always
   a ..._DECL node.  If NO_CHECK is true, the latter check is suppressed.

   If GNU_DECL is zero, a previous association is to be reset.  */

void
save_gnu_tree (Entity_Id gnat_entity, tree gnu_decl, bool no_check)
{
  /* Check that GNAT_ENTITY is not already defined and that it is being set
     to something which is a decl.  Raise gigi 401 if not.  Usually, this
     means GNAT_ENTITY is defined twice, but occasionally is due to some
     Gigi problem.  */
  gcc_assert (!(gnu_decl
                && (PRESENT_GNU_TREE (gnat_entity)
                    || (!no_check && !DECL_P (gnu_decl)))));

  SET_GNU_TREE (gnat_entity, gnu_decl);
}

/* GNAT_ENTITY is a GNAT tree node for a defining identifier.
   Return the ..._DECL node that was associated with it.  If there is no tree
   node associated with GNAT_ENTITY, abort.

   In some cases, such as delayed elaboration or expressions that need to
   be elaborated only once, GNAT_ENTITY is really not an entity.  */

tree
get_gnu_tree (Entity_Id gnat_entity)
{
  gcc_assert (PRESENT_GNU_TREE (gnat_entity));
  return GET_GNU_TREE (gnat_entity);
}

/* Return nonzero if a GCC tree has been associated with GNAT_ENTITY.  */

bool
present_gnu_tree (Entity_Id gnat_entity)
{
  return PRESENT_GNU_TREE (gnat_entity);
}
\f
/* Initialize the association of GNAT nodes to GCC trees as dummies.  */

void
init_dummy_type (void)
{
  dummy_node_table
    = (tree *) ggc_alloc_cleared (max_gnat_nodes * sizeof (tree));
}

/* Make a dummy type corresponding to GNAT_TYPE.  */

tree
make_dummy_type (Entity_Id gnat_type)
{
  Entity_Id gnat_underlying = Gigi_Equivalent_Type (gnat_type);
  tree gnu_type;

  /* If there is an equivalent type, get its underlying type.  */
  if (Present (gnat_underlying))
    gnat_underlying = Underlying_Type (gnat_underlying);

  /* If there was no equivalent type (can only happen when just annotating
     types) or underlying type, go back to the original type.  */
  if (No (gnat_underlying))
    gnat_underlying = gnat_type;

  /* If it there already a dummy type, use that one.  Else make one.  */
  if (PRESENT_DUMMY_NODE (gnat_underlying))
    return GET_DUMMY_NODE (gnat_underlying);

  /* If this is a record, make a RECORD_TYPE or UNION_TYPE; else make
     an ENUMERAL_TYPE.  */
  gnu_type = make_node (Is_Record_Type (gnat_underlying)
                        ? tree_code_for_record_type (gnat_underlying)
                        : ENUMERAL_TYPE);
  TYPE_NAME (gnu_type) = get_entity_name (gnat_type);
  TYPE_DUMMY_P (gnu_type) = 1;
  TYPE_STUB_DECL (gnu_type)
    = create_type_stub_decl (TYPE_NAME (gnu_type), gnu_type);
  if (AGGREGATE_TYPE_P (gnu_type))
    TYPE_BY_REFERENCE_P (gnu_type) = Is_By_Reference_Type (gnat_type);

  SET_DUMMY_NODE (gnat_underlying, gnu_type);

  return gnu_type;
}
\f
/* Return nonzero if we are currently in the global binding level.  */

int
global_bindings_p (void)
{
  return ((force_global || !current_function_decl) ? -1 : 0);
}

/* Enter a new binding level. */

void
gnat_pushlevel (void)
{
  struct gnat_binding_level *newlevel = NULL;

  /* Reuse a struct for this binding level, if there is one.  */
  if (free_binding_level)
    {
      newlevel = free_binding_level;
      free_binding_level = free_binding_level->chain;
    }
  else
    newlevel
      = (struct gnat_binding_level *)
        ggc_alloc (sizeof (struct gnat_binding_level));

  /* Use a free BLOCK, if any; otherwise, allocate one.  */
  if (free_block_chain)
    {
      newlevel->block = free_block_chain;
      free_block_chain = BLOCK_CHAIN (free_block_chain);
      BLOCK_CHAIN (newlevel->block) = NULL_TREE;
    }
  else
    newlevel->block = make_node (BLOCK);

  /* Point the BLOCK we just made to its parent.  */
  if (current_binding_level)
    BLOCK_SUPERCONTEXT (newlevel->block) = current_binding_level->block;

  BLOCK_VARS (newlevel->block) = BLOCK_SUBBLOCKS (newlevel->block) = NULL_TREE;
  TREE_USED (newlevel->block) = 1;

  /* Add this level to the front of the chain (stack) of levels that are
     active.  */
  newlevel->chain = current_binding_level;
  newlevel->jmpbuf_decl = NULL_TREE;
  current_binding_level = newlevel;
}

/* Set SUPERCONTEXT of the BLOCK for the current binding level to FNDECL
   and point FNDECL to this BLOCK.  */

void
set_current_block_context (tree fndecl)
{
  BLOCK_SUPERCONTEXT (current_binding_level->block) = fndecl;
  DECL_INITIAL (fndecl) = current_binding_level->block;
}

/* Set the jmpbuf_decl for the current binding level to DECL.  */

void
set_block_jmpbuf_decl (tree decl)
{
  current_binding_level->jmpbuf_decl = decl;
}

/* Get the jmpbuf_decl, if any, for the current binding level.  */

tree
get_block_jmpbuf_decl (void)
{
  return current_binding_level->jmpbuf_decl;
}

/* Exit a binding level. Set any BLOCK into the current code group.  */

void
gnat_poplevel (void)
{
  struct gnat_binding_level *level = current_binding_level;
  tree block = level->block;

  BLOCK_VARS (block) = nreverse (BLOCK_VARS (block));
  BLOCK_SUBBLOCKS (block) = nreverse (BLOCK_SUBBLOCKS (block));

  /* If this is a function-level BLOCK don't do anything.  Otherwise, if there
     are no variables free the block and merge its subblocks into those of its
     parent block. Otherwise, add it to the list of its parent.  */
  if (TREE_CODE (BLOCK_SUPERCONTEXT (block)) == FUNCTION_DECL)
    ;
  else if (BLOCK_VARS (block) == NULL_TREE)
    {
      BLOCK_SUBBLOCKS (level->chain->block)
        = chainon (BLOCK_SUBBLOCKS (block),
                   BLOCK_SUBBLOCKS (level->chain->block));
      BLOCK_CHAIN (block) = free_block_chain;
      free_block_chain = block;
    }
  else
    {
      BLOCK_CHAIN (block) = BLOCK_SUBBLOCKS (level->chain->block);
      BLOCK_SUBBLOCKS (level->chain->block) = block;
      TREE_USED (block) = 1;
      set_block_for_group (block);
    }

  /* Free this binding structure.  */
  current_binding_level = level->chain;
  level->chain = free_binding_level;
  free_binding_level = level;
}

\f
/* Records a ..._DECL node DECL as belonging to the current lexical scope
   and uses GNAT_NODE for location information and propagating flags.  */

void
gnat_pushdecl (tree decl, Node_Id gnat_node)
{
  /* If this decl is public external or at toplevel, there is no context.
     But PARM_DECLs always go in the level of its function.  */
  if (TREE_CODE (decl) != PARM_DECL
      && ((DECL_EXTERNAL (decl) && TREE_PUBLIC (decl))
          || global_bindings_p ()))
    DECL_CONTEXT (decl) = 0;
  else
    {
      DECL_CONTEXT (decl) = current_function_decl;

      /* Functions imported in another function are not really nested.
         For really nested functions mark them initially as needing
         a static chain for uses of that flag before unnesting;
         lower_nested_functions will then recompute it.  */
      if (TREE_CODE (decl) == FUNCTION_DECL && !TREE_PUBLIC (decl))
        DECL_STATIC_CHAIN (decl) = 1;
    }

  TREE_NO_WARNING (decl) = (gnat_node == Empty || Warnings_Off (gnat_node));

  /* Set the location of DECL and emit a declaration for it.  */
  if (Present (gnat_node))
    Sloc_to_locus (Sloc (gnat_node), &DECL_SOURCE_LOCATION (decl));
  add_decl_expr (decl, gnat_node);

  /* Put the declaration on the list.  The list of declarations is in reverse
     order.  The list will be reversed later.  Put global variables in the
     globals list and builtin functions in a dedicated list to speed up
     further lookups.  Don't put TYPE_DECLs for UNCONSTRAINED_ARRAY_TYPE into
     the list, as they will cause trouble with the debugger and aren't needed
     anyway.  */
  if (TREE_CODE (decl) != TYPE_DECL
      || TREE_CODE (TREE_TYPE (decl)) != UNCONSTRAINED_ARRAY_TYPE)
    {
      if (global_bindings_p ())
        {
          VEC_safe_push (tree, gc, global_decls, decl);

          if (TREE_CODE (decl) == FUNCTION_DECL && DECL_BUILT_IN (decl))
            VEC_safe_push (tree, gc, builtin_decls, decl);
        }
      else
        {
          TREE_CHAIN (decl) = BLOCK_VARS (current_binding_level->block);
          BLOCK_VARS (current_binding_level->block) = decl;
        }
    }

  /* For the declaration of a type, set its name if it either is not already
     set or if the previous type name was not derived from a source name.
     We'd rather have the type named with a real name and all the pointer
     types to the same object have the same POINTER_TYPE node.  Code in the
     equivalent function of c-decl.c makes a copy of the type node here, but
     that may cause us trouble with incomplete types.  We make an exception
     for fat pointer types because the compiler automatically builds them
     for unconstrained array types and the debugger uses them to represent
     both these and pointers to these.  */
  if (TREE_CODE (decl) == TYPE_DECL && DECL_NAME (decl))
    {
      tree t = TREE_TYPE (decl);

      if (!(TYPE_NAME (t) && TREE_CODE (TYPE_NAME (t)) == TYPE_DECL))
        ;
      else if (TYPE_IS_FAT_POINTER_P (t))
        {
          tree tt = build_variant_type_copy (t);
          TYPE_NAME (tt) = decl;
          TREE_USED (tt) = TREE_USED (t);
          TREE_TYPE (decl) = tt;
          if (DECL_ORIGINAL_TYPE (TYPE_NAME (t)))
            DECL_ORIGINAL_TYPE (decl) = DECL_ORIGINAL_TYPE (TYPE_NAME (t));
          else
            DECL_ORIGINAL_TYPE (decl) = t;
          t = NULL_TREE;
          DECL_ARTIFICIAL (decl) = 0;
        }
      else if (DECL_ARTIFICIAL (TYPE_NAME (t)) && !DECL_ARTIFICIAL (decl))
        ;
      else
        t = NULL_TREE;

      /* Propagate the name to all the variants.  This is needed for
         the type qualifiers machinery to work properly.  */
      if (t)
        for (t = TYPE_MAIN_VARIANT (t); t; t = TYPE_NEXT_VARIANT (t))
          TYPE_NAME (t) = decl;
    }
}
\f
/* Do little here.  Set up the standard declarations later after the
   front end has been run.  */

void
gnat_init_decl_processing (void)
{
  /* Make the binding_level structure for global names.  */
  current_function_decl = 0;
  current_binding_level = 0;
  free_binding_level = 0;
  gnat_pushlevel ();

  build_common_tree_nodes (true, true);

  /* In Ada, we use a signed type for SIZETYPE.  Use the signed type
     corresponding to the width of Pmode.  In most cases when ptr_mode
     and Pmode differ, C will use the width of ptr_mode for SIZETYPE.
     But we get far better code using the width of Pmode.  */
  size_type_node = gnat_type_for_mode (Pmode, 0);
  set_sizetype (size_type_node);

  /* In Ada, we use an unsigned 8-bit type for the default boolean type.  */
  boolean_type_node = make_unsigned_type (8);
  TREE_SET_CODE (boolean_type_node, BOOLEAN_TYPE);
  SET_TYPE_RM_MAX_VALUE (boolean_type_node,
                         build_int_cst (boolean_type_node, 1));
  SET_TYPE_RM_SIZE (boolean_type_node, bitsize_int (1));

  build_common_tree_nodes_2 (0);
  boolean_true_node = TYPE_MAX_VALUE (boolean_type_node);

  ptr_void_type_node = build_pointer_type (void_type_node);
}
\f
/* Record TYPE as a builtin type for Ada.  NAME is the name of the type.  */

void
record_builtin_type (const char *name, tree type)
{
  tree type_decl = build_decl (input_location,
                               TYPE_DECL, get_identifier (name), type);

  gnat_pushdecl (type_decl, Empty);

  if (debug_hooks->type_decl)
    debug_hooks->type_decl (type_decl, false);
}
\f
/* Given a record type RECORD_TYPE and a list of FIELD_DECL nodes FIELD_LIST,
   finish constructing the record or union type.  If REP_LEVEL is zero, this
   record has no representation clause and so will be entirely laid out here.
   If REP_LEVEL is one, this record has a representation clause and has been
   laid out already; only set the sizes and alignment.  If REP_LEVEL is two,
   this record is derived from a parent record and thus inherits its layout;
   only make a pass on the fields to finalize them.  DEBUG_INFO_P is true if
   we need to write debug information about this type.  */

void
finish_record_type (tree record_type, tree field_list, int rep_level,
                    bool debug_info_p)
{
  enum tree_code code = TREE_CODE (record_type);
  tree name = TYPE_NAME (record_type);
  tree ada_size = bitsize_zero_node;
  tree size = bitsize_zero_node;
  bool had_size = TYPE_SIZE (record_type) != 0;
  bool had_size_unit = TYPE_SIZE_UNIT (record_type) != 0;
  bool had_align = TYPE_ALIGN (record_type) != 0;
  tree field;

  TYPE_FIELDS (record_type) = field_list;

  /* Always attach the TYPE_STUB_DECL for a record type.  It is required to
     generate debug info and have a parallel type.  */
  if (name && TREE_CODE (name) == TYPE_DECL)
    name = DECL_NAME (name);
  TYPE_STUB_DECL (record_type) = create_type_stub_decl (name, record_type);

  /* Globally initialize the record first.  If this is a rep'ed record,
     that just means some initializations; otherwise, layout the record.  */
  if (rep_level > 0)
    {
      TYPE_ALIGN (record_type) = MAX (BITS_PER_UNIT, TYPE_ALIGN (record_type));
      SET_TYPE_MODE (record_type, BLKmode);

      if (!had_size_unit)
        TYPE_SIZE_UNIT (record_type) = size_zero_node;
      if (!had_size)
        TYPE_SIZE (record_type) = bitsize_zero_node;

      /* For all-repped records with a size specified, lay the QUAL_UNION_TYPE
         out just like a UNION_TYPE, since the size will be fixed.  */
      else if (code == QUAL_UNION_TYPE)
        code = UNION_TYPE;
    }
  else
    {
      /* Ensure there isn't a size already set.  There can be in an error
         case where there is a rep clause but all fields have errors and
         no longer have a position.  */
      TYPE_SIZE (record_type) = 0;
      layout_type (record_type);
    }

  /* At this point, the position and size of each field is known.  It was
     either set before entry by a rep clause, or by laying out the type above.

     We now run a pass over the fields (in reverse order for QUAL_UNION_TYPEs)
     to compute the Ada size; the GCC size and alignment (for rep'ed records
     that are not padding types); and the mode (for rep'ed records).  We also
     clear the DECL_BIT_FIELD indication for the cases we know have not been
     handled yet, and adjust DECL_NONADDRESSABLE_P accordingly.  */

  if (code == QUAL_UNION_TYPE)
    field_list = nreverse (field_list);

  for (field = field_list; field; field = TREE_CHAIN (field))
    {
      tree type = TREE_TYPE (field);
      tree pos = bit_position (field);
      tree this_size = DECL_SIZE (field);
      tree this_ada_size;

      if ((TREE_CODE (type) == RECORD_TYPE
           || TREE_CODE (type) == UNION_TYPE
           || TREE_CODE (type) == QUAL_UNION_TYPE)
          && !TYPE_FAT_POINTER_P (type)
          && !TYPE_CONTAINS_TEMPLATE_P (type)
          && TYPE_ADA_SIZE (type))
        this_ada_size = TYPE_ADA_SIZE (type);
      else
        this_ada_size = this_size;

      /* Clear DECL_BIT_FIELD for the cases layout_decl does not handle.  */
      if (DECL_BIT_FIELD (field)
          && operand_equal_p (this_size, TYPE_SIZE (type), 0))
        {
          unsigned int align = TYPE_ALIGN (type);

          /* In the general case, type alignment is required.  */
          if (value_factor_p (pos, align))
            {
              /* The enclosing record type must be sufficiently aligned.
                 Otherwise, if no alignment was specified for it and it
                 has been laid out already, bump its alignment to the
                 desired one if this is compatible with its size.  */
              if (TYPE_ALIGN (record_type) >= align)
                {
                  DECL_ALIGN (field) = MAX (DECL_ALIGN (field), align);
                  DECL_BIT_FIELD (field) = 0;
                }
              else if (!had_align
                       && rep_level == 0
                       && value_factor_p (TYPE_SIZE (record_type), align))
                {
                  TYPE_ALIGN (record_type) = align;
                  DECL_ALIGN (field) = MAX (DECL_ALIGN (field), align);
                  DECL_BIT_FIELD (field) = 0;
                }
            }

          /* In the non-strict alignment case, only byte alignment is.  */
          if (!STRICT_ALIGNMENT
              && DECL_BIT_FIELD (field)
              && value_factor_p (pos, BITS_PER_UNIT))
            DECL_BIT_FIELD (field) = 0;
        }

      /* If we still have DECL_BIT_FIELD set at this point, we know that the
         field is technically not addressable.  Except that it can actually
         be addressed if it is BLKmode and happens to be properly aligned.  */
      if (DECL_BIT_FIELD (field)
          && !(DECL_MODE (field) == BLKmode
               && value_factor_p (pos, BITS_PER_UNIT)))
        DECL_NONADDRESSABLE_P (field) = 1;

      /* A type must be as aligned as its most aligned field that is not
         a bit-field.  But this is already enforced by layout_type.  */
      if (rep_level > 0 && !DECL_BIT_FIELD (field))
        TYPE_ALIGN (record_type)
          = MAX (TYPE_ALIGN (record_type), DECL_ALIGN (field));

      switch (code)
        {
        case UNION_TYPE:
          ada_size = size_binop (MAX_EXPR, ada_size, this_ada_size);
          size = size_binop (MAX_EXPR, size, this_size);
          break;

        case QUAL_UNION_TYPE:
          ada_size
            = fold_build3 (COND_EXPR, bitsizetype, DECL_QUALIFIER (field),
                           this_ada_size, ada_size);
          size = fold_build3 (COND_EXPR, bitsizetype, DECL_QUALIFIER (field),
                              this_size, size);
          break;

        case RECORD_TYPE:
          /* Since we know here that all fields are sorted in order of
             increasing bit position, the size of the record is one
             higher than the ending bit of the last field processed
             unless we have a rep clause, since in that case we might
             have a field outside a QUAL_UNION_TYPE that has a higher ending
             position.  So use a MAX in that case.  Also, if this field is a
             QUAL_UNION_TYPE, we need to take into account the previous size in
             the case of empty variants.  */
          ada_size
            = merge_sizes (ada_size, pos, this_ada_size,
                           TREE_CODE (type) == QUAL_UNION_TYPE, rep_level > 0);
          size
            = merge_sizes (size, pos, this_size,
                           TREE_CODE (type) == QUAL_UNION_TYPE, rep_level > 0);
          break;

        default:
          gcc_unreachable ();
        }
    }

  if (code == QUAL_UNION_TYPE)
    nreverse (field_list);

  if (rep_level < 2)
    {
      /* If this is a padding record, we never want to make the size smaller
         than what was specified in it, if any.  */
      if (TYPE_IS_PADDING_P (record_type) && TYPE_SIZE (record_type))
        size = TYPE_SIZE (record_type);

      /* Now set any of the values we've just computed that apply.  */
      if (!TYPE_FAT_POINTER_P (record_type)
          && !TYPE_CONTAINS_TEMPLATE_P (record_type))
        SET_TYPE_ADA_SIZE (record_type, ada_size);

      if (rep_level > 0)
        {
          tree size_unit = had_size_unit
                           ? TYPE_SIZE_UNIT (record_type)
                           : convert (sizetype,
                                      size_binop (CEIL_DIV_EXPR, size,
                                                  bitsize_unit_node));
          unsigned int align = TYPE_ALIGN (record_type);

          TYPE_SIZE (record_type) = variable_size (round_up (size, align));
          TYPE_SIZE_UNIT (record_type)
            = variable_size (round_up (size_unit, align / BITS_PER_UNIT));

          compute_record_mode (record_type);
        }
    }

  if (debug_info_p)
    rest_of_record_type_compilation (record_type);
}

/* Wrap up compilation of RECORD_TYPE, i.e. output all the debug information
   associated with it.  It need not be invoked directly in most cases since
   finish_record_type takes care of doing so, but this can be necessary if
   a parallel type is to be attached to the record type.  */

void
rest_of_record_type_compilation (tree record_type)
{
  tree field_list = TYPE_FIELDS (record_type);
  tree field;
  enum tree_code code = TREE_CODE (record_type);
  bool var_size = false;

  for (field = field_list; field; field = TREE_CHAIN (field))
    {
      /* We need to make an XVE/XVU record if any field has variable size,
         whether or not the record does.  For example, if we have a union,
         it may be that all fields, rounded up to the alignment, have the
         same size, in which case we'll use that size.  But the debug
         output routines (except Dwarf2) won't be able to output the fields,
         so we need to make the special record.  */
      if (TREE_CODE (DECL_SIZE (field)) != INTEGER_CST
          /* If a field has a non-constant qualifier, the record will have
             variable size too.  */
          || (code == QUAL_UNION_TYPE
              && TREE_CODE (DECL_QUALIFIER (field)) != INTEGER_CST))
        {
          var_size = true;
          break;
        }
    }

  /* If this record is of variable size, rename it so that the
     debugger knows it is and make a new, parallel, record
     that tells the debugger how the record is laid out.  See
     exp_dbug.ads.  But don't do this for records that are padding
     since they confuse GDB.  */
  if (var_size && !TYPE_IS_PADDING_P (record_type))
    {
      tree new_record_type
        = make_node (TREE_CODE (record_type) == QUAL_UNION_TYPE
                     ? UNION_TYPE : TREE_CODE (record_type));
      tree orig_name = TYPE_NAME (record_type), new_name;
      tree last_pos = bitsize_zero_node;
      tree old_field, prev_old_field = NULL_TREE;

      if (TREE_CODE (orig_name) == TYPE_DECL)
        orig_name = DECL_NAME (orig_name);

      new_name
        = concat_name (orig_name, TREE_CODE (record_type) == QUAL_UNION_TYPE
                                  ? "XVU" : "XVE");
      TYPE_NAME (new_record_type) = new_name;
      TYPE_ALIGN (new_record_type) = BIGGEST_ALIGNMENT;
      TYPE_STUB_DECL (new_record_type)
        = create_type_stub_decl (new_name, new_record_type);
      DECL_IGNORED_P (TYPE_STUB_DECL (new_record_type))
        = DECL_IGNORED_P (TYPE_STUB_DECL (record_type));
      TYPE_SIZE (new_record_type) = size_int (TYPE_ALIGN (record_type));
      TYPE_SIZE_UNIT (new_record_type)
        = size_int (TYPE_ALIGN (record_type) / BITS_PER_UNIT);

      add_parallel_type (TYPE_STUB_DECL (record_type), new_record_type);

      /* Now scan all the fields, replacing each field with a new
         field corresponding to the new encoding.  */
      for (old_field = TYPE_FIELDS (record_type); old_field;
           old_field = TREE_CHAIN (old_field))
        {
          tree field_type = TREE_TYPE (old_field);
          tree field_name = DECL_NAME (old_field);
          tree new_field;
          tree curpos = bit_position (old_field);
          bool var = false;
          unsigned int align = 0;
          tree pos;

          /* See how the position was modified from the last position.

          There are two basic cases we support: a value was added
          to the last position or the last position was rounded to
          a boundary and they something was added.  Check for the
          first case first.  If not, see if there is any evidence
          of rounding.  If so, round the last position and try
          again.

          If this is a union, the position can be taken as zero. */

          /* Some computations depend on the shape of the position expression,
             so strip conversions to make sure it's exposed.  */
          curpos = remove_conversions (curpos, true);

          if (TREE_CODE (new_record_type) == UNION_TYPE)
            pos = bitsize_zero_node, align = 0;
          else
            pos = compute_related_constant (curpos, last_pos);

          if (!pos && TREE_CODE (curpos) == MULT_EXPR
              && host_integerp (TREE_OPERAND (curpos, 1), 1))
            {
              tree offset = TREE_OPERAND (curpos, 0);
              align = tree_low_cst (TREE_OPERAND (curpos, 1), 1);

              /* An offset which is a bitwise AND with a negative power of 2
                 means an alignment corresponding to this power of 2.  */
              offset = remove_conversions (offset, true);
              if (TREE_CODE (offset) == BIT_AND_EXPR
                  && host_integerp (TREE_OPERAND (offset, 1), 0)
                  && tree_int_cst_sgn (TREE_OPERAND (offset, 1)) < 0)
                {
                  unsigned int pow
                    = - tree_low_cst (TREE_OPERAND (offset, 1), 0);
                  if (exact_log2 (pow) > 0)
                    align *= pow;
                }

              pos = compute_related_constant (curpos,
                                              round_up (last_pos, align));
            }
          else if (!pos && TREE_CODE (curpos) == PLUS_EXPR
                   && TREE_CODE (TREE_OPERAND (curpos, 1)) == INTEGER_CST
                   && TREE_CODE (TREE_OPERAND (curpos, 0)) == MULT_EXPR
                   && host_integerp (TREE_OPERAND
                                     (TREE_OPERAND (curpos, 0), 1),
                                     1))
            {
              align
                = tree_low_cst
                (TREE_OPERAND (TREE_OPERAND (curpos, 0), 1), 1);
              pos = compute_related_constant (curpos,
                                              round_up (last_pos, align));
            }
          else if (potential_alignment_gap (prev_old_field, old_field,
                                            pos))
            {
              align = TYPE_ALIGN (field_type);
              pos = compute_related_constant (curpos,
                                              round_up (last_pos, align));
            }

          /* If we can't compute a position, set it to zero.

          ??? We really should abort here, but it's too much work
          to get this correct for all cases.  */

          if (!pos)
            pos = bitsize_zero_node;

          /* See if this type is variable-sized and make a pointer type
             and indicate the indirection if so.  Beware that the debug
             back-end may adjust the position computed above according
             to the alignment of the field type, i.e. the pointer type
             in this case, if we don't preventively counter that.  */
          if (TREE_CODE (DECL_SIZE (old_field)) != INTEGER_CST)
            {
              field_type = build_pointer_type (field_type);
              if (align != 0 && TYPE_ALIGN (field_type) > align)
                {
                  field_type = copy_node (field_type);
                  TYPE_ALIGN (field_type) = align;
                }
              var = true;
            }

          /* Make a new field name, if necessary.  */
          if (var || align != 0)
            {
              char suffix[16];

              if (align != 0)
                sprintf (suffix, "XV%c%u", var ? 'L' : 'A',
                         align / BITS_PER_UNIT);
              else
                strcpy (suffix, "XVL");

              field_name = concat_name (field_name, suffix);
            }

          new_field = create_field_decl (field_name, field_type,
                                         new_record_type, 0,
                                         DECL_SIZE (old_field), pos, 0);
          TREE_CHAIN (new_field) = TYPE_FIELDS (new_record_type);
          TYPE_FIELDS (new_record_type) = new_field;

          /* If old_field is a QUAL_UNION_TYPE, take its size as being
             zero.  The only time it's not the last field of the record
             is when there are other components at fixed positions after
             it (meaning there was a rep clause for every field) and we
             want to be able to encode them.  */
          last_pos = size_binop (PLUS_EXPR, bit_position (old_field),
                                 (TREE_CODE (TREE_TYPE (old_field))
                                  == QUAL_UNION_TYPE)
                                 ? bitsize_zero_node
                                 : DECL_SIZE (old_field));
          prev_old_field = old_field;
        }

      TYPE_FIELDS (new_record_type)
        = nreverse (TYPE_FIELDS (new_record_type));

      rest_of_type_decl_compilation (TYPE_STUB_DECL (new_record_type));
    }

  rest_of_type_decl_compilation (TYPE_STUB_DECL (record_type));
}

/* Append PARALLEL_TYPE on the chain of parallel types for decl.  */

void
add_parallel_type (tree decl, tree parallel_type)
{
  tree d = decl;

  while (DECL_PARALLEL_TYPE (d))
    d = TYPE_STUB_DECL (DECL_PARALLEL_TYPE (d));

  SET_DECL_PARALLEL_TYPE (d, parallel_type);
}

/* Return the parallel type associated to a type, if any.  */

tree
get_parallel_type (tree type)
{
  if (TYPE_STUB_DECL (type))
    return DECL_PARALLEL_TYPE (TYPE_STUB_DECL (type));
  else
    return NULL_TREE;
}

/* Utility function of above to merge LAST_SIZE, the previous size of a record
   with FIRST_BIT and SIZE that describe a field.  SPECIAL is true if this
   represents a QUAL_UNION_TYPE in which case we must look for COND_EXPRs and
   replace a value of zero with the old size.  If HAS_REP is true, we take the
   MAX of the end position of this field with LAST_SIZE.  In all other cases,
   we use FIRST_BIT plus SIZE.  Return an expression for the size.  */

static tree
merge_sizes (tree last_size, tree first_bit, tree size, bool special,
             bool has_rep)
{
  tree type = TREE_TYPE (last_size);
  tree new_size;

  if (!special || TREE_CODE (size) != COND_EXPR)
    {
      new_size = size_binop (PLUS_EXPR, first_bit, size);
      if (has_rep)
        new_size = size_binop (MAX_EXPR, last_size, new_size);
    }

  else
    new_size = fold_build3 (COND_EXPR, type, TREE_OPERAND (size, 0),
                            integer_zerop (TREE_OPERAND (size, 1))
                            ? last_size : merge_sizes (last_size, first_bit,
                                                       TREE_OPERAND (size, 1),
                                                       1, has_rep),
                            integer_zerop (TREE_OPERAND (size, 2))
                            ? last_size : merge_sizes (last_size, first_bit,
                                                       TREE_OPERAND (size, 2),
                                                       1, has_rep));

  /* We don't need any NON_VALUE_EXPRs and they can confuse us (especially
     when fed through substitute_in_expr) into thinking that a constant
     size is not constant.  */
  while (TREE_CODE (new_size) == NON_LVALUE_EXPR)
    new_size = TREE_OPERAND (new_size, 0);

  return new_size;
}

/* Utility function of above to see if OP0 and OP1, both of SIZETYPE, are
   related by the addition of a constant.  Return that constant if so.  */

static tree
compute_related_constant (tree op0, tree op1)
{
  tree op0_var, op1_var;
  tree op0_con = split_plus (op0, &op0_var);
  tree op1_con = split_plus (op1, &op1_var);
  tree result = size_binop (MINUS_EXPR, op0_con, op1_con);

  if (operand_equal_p (op0_var, op1_var, 0))
    return result;
  else if (operand_equal_p (op0, size_binop (PLUS_EXPR, op1_var, result), 0))
    return result;
  else
    return 0;
}

/* Utility function of above to split a tree OP which may be a sum, into a
   constant part, which is returned, and a variable part, which is stored
   in *PVAR.  *PVAR may be bitsize_zero_node.  All operations must be of
   bitsizetype.  */

static tree
split_plus (tree in, tree *pvar)
{
  /* Strip NOPS in order to ease the tree traversal and maximize the
     potential for constant or plus/minus discovery. We need to be careful
     to always return and set *pvar to bitsizetype trees, but it's worth
     the effort.  */
  STRIP_NOPS (in);

  *pvar = convert (bitsizetype, in);

  if (TREE_CODE (in) == INTEGER_CST)
    {
      *pvar = bitsize_zero_node;
      return convert (bitsizetype, in);
    }
  else if (TREE_CODE (in) == PLUS_EXPR || TREE_CODE (in) == MINUS_EXPR)
    {
      tree lhs_var, rhs_var;
      tree lhs_con = split_plus (TREE_OPERAND (in, 0), &lhs_var);
      tree rhs_con = split_plus (TREE_OPERAND (in, 1), &rhs_var);

      if (lhs_var == TREE_OPERAND (in, 0)
          && rhs_var == TREE_OPERAND (in, 1))
        return bitsize_zero_node;

      *pvar = size_binop (TREE_CODE (in), lhs_var, rhs_var);
      return size_binop (TREE_CODE (in), lhs_con, rhs_con);
    }
  else
    return bitsize_zero_node;
}
\f
/* Return a FUNCTION_TYPE node. RETURN_TYPE is the type returned by the
   subprogram. If it is void_type_node, then we are dealing with a procedure,
   otherwise we are dealing with a function. PARAM_DECL_LIST is a list of
   PARM_DECL nodes that are the subprogram arguments.  CICO_LIST is the
   copy-in/copy-out list to be stored into TYPE_CICO_LIST.
   RETURNS_UNCONSTRAINED is true if the function returns an unconstrained
   object.  RETURNS_BY_REF is true if the function returns by reference.
   RETURNS_BY_TARGET_PTR is true if the function is to be passed (as its
   first parameter) the address of the place to copy its result.  */

tree
create_subprog_type (tree return_type, tree param_decl_list, tree cico_list,
                     bool returns_unconstrained, bool returns_by_ref,
                     bool returns_by_target_ptr)
{
  /* A chain of TREE_LIST nodes whose TREE_VALUEs are the data type nodes of
     the subprogram formal parameters. This list is generated by traversing the
     input list of PARM_DECL nodes.  */
  tree param_type_list = NULL;
  tree param_decl;
  tree type;

  for (param_decl = param_decl_list; param_decl;
       param_decl = TREE_CHAIN (param_decl))
    param_type_list = tree_cons (NULL_TREE, TREE_TYPE (param_decl),
                                 param_type_list);

  /* The list of the function parameter types has to be terminated by the void
     type to signal to the back-end that we are not dealing with a variable
     parameter subprogram, but that the subprogram has a fixed number of
     parameters.  */
  param_type_list = tree_cons (NULL_TREE, void_type_node, param_type_list);

  /* The list of argument types has been created in reverse
     so nreverse it.   */
  param_type_list = nreverse (param_type_list);

  type = build_function_type (return_type, param_type_list);

  /* TYPE may have been shared since GCC hashes types.  If it has a CICO_LIST
     or the new type should, make a copy of TYPE.  Likewise for
     RETURNS_UNCONSTRAINED and RETURNS_BY_REF.  */
  if (TYPE_CI_CO_LIST (type) || cico_list
      || TYPE_RETURNS_UNCONSTRAINED_P (type) != returns_unconstrained
      || TYPE_RETURNS_BY_REF_P (type) != returns_by_ref
      || TYPE_RETURNS_BY_TARGET_PTR_P (type) != returns_by_target_ptr)
    type = copy_type (type);

  TYPE_CI_CO_LIST (type) = cico_list;
  TYPE_RETURNS_UNCONSTRAINED_P (type) = returns_unconstrained;
  TYPE_RETURNS_BY_REF_P (type) = returns_by_ref;
  TYPE_RETURNS_BY_TARGET_PTR_P (type) = returns_by_target_ptr;
  return type;
}
\f
/* Return a copy of TYPE but safe to modify in any way.  */

tree
copy_type (tree type)
{
  tree new_type = copy_node (type);

  /* Unshare the language-specific data.  */
  if (TYPE_LANG_SPECIFIC (type))
    {
      TYPE_LANG_SPECIFIC (new_type) = NULL;
      SET_TYPE_LANG_SPECIFIC (new_type, GET_TYPE_LANG_SPECIFIC (type));
    }

  /* And the contents of the language-specific slot if needed.  */
  if ((INTEGRAL_TYPE_P (type) || TREE_CODE (type) == REAL_TYPE)
      && TYPE_RM_VALUES (type))
    {
      TYPE_RM_VALUES (new_type) = NULL_TREE;
      SET_TYPE_RM_SIZE (new_type, TYPE_RM_SIZE (type));
      SET_TYPE_RM_MIN_VALUE (new_type, TYPE_RM_MIN_VALUE (type));
      SET_TYPE_RM_MAX_VALUE (new_type, TYPE_RM_MAX_VALUE (type));
    }

  /* copy_node clears this field instead of copying it, because it is
     aliased with TREE_CHAIN.  */
  TYPE_STUB_DECL (new_type) = TYPE_STUB_DECL (type);

  TYPE_POINTER_TO (new_type) = 0;
  TYPE_REFERENCE_TO (new_type) = 0;
  TYPE_MAIN_VARIANT (new_type) = new_type;
  TYPE_NEXT_VARIANT (new_type) = 0;

  return new_type;
}
\f
/* Return a subtype of sizetype with range MIN to MAX and whose
   TYPE_INDEX_TYPE is INDEX.  GNAT_NODE is used for the position
   of the associated TYPE_DECL.  */

tree
create_index_type (tree min, tree max, tree index, Node_Id gnat_node)
{
  /* First build a type for the desired range.  */
  tree type = build_index_2_type (min, max);

  /* If this type has the TYPE_INDEX_TYPE we want, return it.  */
  if (TYPE_INDEX_TYPE (type) == index)
    return type;

  /* Otherwise, if TYPE_INDEX_TYPE is set, make a copy.  Note that we have
     no way of sharing these types, but that's only a small hole.  */
  if (TYPE_INDEX_TYPE (type))
    type = copy_type (type);

  SET_TYPE_INDEX_TYPE (type, index);
  create_type_decl (NULL_TREE, type, NULL, true, false, gnat_node);

  return type;
}

/* Return a subtype of TYPE with range MIN to MAX.  If TYPE is NULL,
   sizetype is used.  */

tree
create_range_type (tree type, tree min, tree max)
{
  tree range_type;

  if (type == NULL_TREE)
    type = sizetype;

  /* First build a type with the base range.  */
  range_type
    = build_range_type (type, TYPE_MIN_VALUE (type), TYPE_MAX_VALUE (type));

  min = convert (type, min);
  max = convert (type, max);

  /* If this type has the TYPE_RM_{MIN,MAX}_VALUE we want, return it.  */
  if (TYPE_RM_MIN_VALUE (range_type)
      && TYPE_RM_MAX_VALUE (range_type)
      && operand_equal_p (TYPE_RM_MIN_VALUE (range_type), min, 0)
      && operand_equal_p (TYPE_RM_MAX_VALUE (range_type), max, 0))
    return range_type;

  /* Otherwise, if TYPE_RM_{MIN,MAX}_VALUE is set, make a copy.  */
  if (TYPE_RM_MIN_VALUE (range_type) || TYPE_RM_MAX_VALUE (range_type))
    range_type = copy_type (range_type);

  /* Then set the actual range.  */
  SET_TYPE_RM_MIN_VALUE (range_type, min);
  SET_TYPE_RM_MAX_VALUE (range_type, max);

  return range_type;
}
\f
/* Return a TYPE_DECL node suitable for the TYPE_STUB_DECL field of a type.
   TYPE_NAME gives the name of the type and TYPE is a ..._TYPE node giving
   its data type.  */

tree
create_type_stub_decl (tree type_name, tree type)
{
  /* Using a named TYPE_DECL ensures that a type name marker is emitted in
     STABS while setting DECL_ARTIFICIAL ensures that no DW_TAG_typedef is
     emitted in DWARF.  */
  tree type_decl = build_decl (input_location,
                               TYPE_DECL, type_name, type);
  DECL_ARTIFICIAL (type_decl) = 1;
  return type_decl;
}

/* Return a TYPE_DECL node.  TYPE_NAME gives the name of the type and TYPE
   is a ..._TYPE node giving its data type.  ARTIFICIAL_P is true if this
   is a declaration that was generated by the compiler.  DEBUG_INFO_P is
   true if we need to write debug information about this type.  GNAT_NODE
   is used for the position of the decl.  */

tree
create_type_decl (tree type_name, tree type, struct attrib *attr_list,
                  bool artificial_p, bool debug_info_p, Node_Id gnat_node)
{
  enum tree_code code = TREE_CODE (type);
  bool named = TYPE_NAME (type) && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL;
  tree type_decl;

  /* Only the builtin TYPE_STUB_DECL should be used for dummy types.  */
  gcc_assert (!TYPE_IS_DUMMY_P (type));

  /* If the type hasn't been named yet, we're naming it; preserve an existing
     TYPE_STUB_DECL that has been attached to it for some purpose.  */
  if (!named && TYPE_STUB_DECL (type))
    {
      type_decl = TYPE_STUB_DECL (type);
      DECL_NAME (type_decl) = type_name;
    }
  else
    type_decl = build_decl (input_location,
                            TYPE_DECL, type_name, type);

  DECL_ARTIFICIAL (type_decl) = artificial_p;
  gnat_pushdecl (type_decl, gnat_node);
  process_attributes (type_decl, attr_list);

  /* If we're naming the type, equate the TYPE_STUB_DECL to the name.
     This causes the name to be also viewed as a "tag" by the debug
     back-end, with the advantage that no DW_TAG_typedef is emitted
     for artificial "tagged" types in DWARF.  */
  if (!named)
    TYPE_STUB_DECL (type) = type_decl;

  /* Pass the type declaration to the debug back-end unless this is an
     UNCONSTRAINED_ARRAY_TYPE that the back-end does not support, or a
     type for which debugging information was not requested, or else an
     ENUMERAL_TYPE or RECORD_TYPE (except for fat pointers) which are
     handled separately.  And do not pass dummy types either.  */
  if (code == UNCONSTRAINED_ARRAY_TYPE || !debug_info_p)
    DECL_IGNORED_P (type_decl) = 1;
  else if (code != ENUMERAL_TYPE
           && (code != RECORD_TYPE || TYPE_FAT_POINTER_P (type))
           && !((code == POINTER_TYPE || code == REFERENCE_TYPE)
                && TYPE_IS_DUMMY_P (TREE_TYPE (type)))
           && !(code == RECORD_TYPE
                && TYPE_IS_DUMMY_P
                   (TREE_TYPE (TREE_TYPE (TYPE_FIELDS (type))))))
    rest_of_type_decl_compilation (type_decl);

  return type_decl;
}
\f
/* Return a VAR_DECL or CONST_DECL node.

   VAR_NAME gives the name of the variable.  ASM_NAME is its assembler name
   (if provided).  TYPE is its data type (a GCC ..._TYPE node).  VAR_INIT is
   the GCC tree for an optional initial expression; NULL_TREE if none.

   CONST_FLAG is true if this variable is constant, in which case we might
   return a CONST_DECL node unless CONST_DECL_ALLOWED_P is false.

   PUBLIC_FLAG is true if this is for a reference to a public entity or for a
   definition to be made visible outside of the current compilation unit, for
   instance variable definitions in a package specification.

   EXTERN_FLAG is true when processing an external variable declaration (as
   opposed to a definition: no storage is to be allocated for the variable).

   STATIC_FLAG is only relevant when not at top level.  In that case
   it indicates whether to always allocate storage to the variable.

   GNAT_NODE is used for the position of the decl.  */

tree
create_var_decl_1 (tree var_name, tree asm_name, tree type, tree var_init,
                   bool const_flag, bool public_flag, bool extern_flag,
                   bool static_flag, bool const_decl_allowed_p,
                   struct attrib *attr_list, Node_Id gnat_node)
{
  bool init_const
    = (var_init != 0
       && gnat_types_compatible_p (type, TREE_TYPE (var_init))
       && (global_bindings_p () || static_flag
           ? initializer_constant_valid_p (var_init, TREE_TYPE (var_init)) != 0
           : TREE_CONSTANT (var_init)));

  /* Whether we will make TREE_CONSTANT the DECL we produce here, in which
     case the initializer may be used in-lieu of the DECL node (as done in
     Identifier_to_gnu).  This is useful to prevent the need of elaboration
     code when an identifier for which such a decl is made is in turn used as
     an initializer.  We used to rely on CONST vs VAR_DECL for this purpose,
     but extra constraints apply to this choice (see below) and are not
     relevant to the distinction we wish to make. */
  bool constant_p = const_flag && init_const;

  /* The actual DECL node.  CONST_DECL was initially intended for enumerals
     and may be used for scalars in general but not for aggregates.  */
  tree var_decl
    = build_decl (input_location,
                  (constant_p && const_decl_allowed_p
                   && !AGGREGATE_TYPE_P (type)) ? CONST_DECL : VAR_DECL,
                  var_name, type);

  /* If this is external, throw away any initializations (they will be done
     elsewhere) unless this is a constant for which we would like to remain
     able to get the initializer.  If we are defining a global here, leave a
     constant initialization and save any variable elaborations for the
     elaboration routine.  If we are just annotating types, throw away the
     initialization if it isn't a constant.  */
  if ((extern_flag && !constant_p)
      || (type_annotate_only && var_init && !TREE_CONSTANT (var_init)))
    var_init = NULL_TREE;

  /* At the global level, an initializer requiring code to be generated
     produces elaboration statements.  Check that such statements are allowed,
     that is, not violating a No_Elaboration_Code restriction.  */
  if (global_bindings_p () && var_init != 0 && ! init_const)
    Check_Elaboration_Code_Allowed (gnat_node);

  /* Ada doesn't feature Fortran-like COMMON variables so we shouldn't
     try to fiddle with DECL_COMMON.  However, on platforms that don't
     support global BSS sections, uninitialized global variables would
     go in DATA instead, thus increasing the size of the executable.  */
  if (!flag_no_common
      && TREE_CODE (var_decl) == VAR_DECL
      && !have_global_bss_p ())
    DECL_COMMON (var_decl) = 1;
  DECL_INITIAL  (var_decl) = var_init;
  TREE_READONLY (var_decl) = const_flag;
  DECL_EXTERNAL (var_decl) = extern_flag;
  TREE_PUBLIC   (var_decl) = public_flag || extern_flag;
  TREE_CONSTANT (var_decl) = constant_p;
  TREE_THIS_VOLATILE (var_decl) = TREE_SIDE_EFFECTS (var_decl)
    = TYPE_VOLATILE (type);

  /* If it's public and not external, always allocate storage for it.
     At the global binding level we need to allocate static storage for the
     variable if and only if it's not external. If we are not at the top level
     we allocate automatic storage unless requested not to.  */
  TREE_STATIC (var_decl)
    = !extern_flag && (public_flag || static_flag || global_bindings_p ());

  /* For an external constant whose initializer is not absolute, do not emit
     debug info.  In DWARF this would mean a global relocation in a read-only
     section which runs afoul of the PE-COFF runtime relocation mechanism.  */
  if (extern_flag
      && constant_p
      && initializer_constant_valid_p (var_init, TREE_TYPE (var_init))
           != null_pointer_node)
    DECL_IGNORED_P (var_decl) = 1;

  if (TREE_CODE (var_decl) == VAR_DECL)
    {
      if (asm_name)
        SET_DECL_ASSEMBLER_NAME (var_decl, asm_name);
      process_attributes (var_decl, attr_list);
    }

  /* Add this decl to the current binding level.  */
  gnat_pushdecl (var_decl, gnat_node);

  if (TREE_SIDE_EFFECTS (var_decl))
    TREE_ADDRESSABLE (var_decl) = 1;

  if (TREE_CODE (var_decl) != CONST_DECL)
    {
      if (global_bindings_p ())
        rest_of_decl_compilation (var_decl, true, 0);
    }
  else
    expand_decl (var_decl);

  return var_decl;
}
\f
/* Return true if TYPE, an aggregate type, contains (or is) an array.  */

static bool
aggregate_type_contains_array_p (tree type)
{
  switch (TREE_CODE (type))
    {
    case RECORD_TYPE:
    case UNION_TYPE:
    case QUAL_UNION_TYPE:
      {
        tree field;
        for (field = TYPE_FIELDS (type); field; field = TREE_CHAIN (field))
          if (AGGREGATE_TYPE_P (TREE_TYPE (field))
              && aggregate_type_contains_array_p (TREE_TYPE (field)))
            return true;
        return false;
      }

    case ARRAY_TYPE:
      return true;

    default:
      gcc_unreachable ();
    }
}

/* Return a FIELD_DECL node.  FIELD_NAME is the field's name, FIELD_TYPE is
   its type and RECORD_TYPE is the type of the enclosing record.  PACKED is
   1 if the enclosing record is packed, -1 if it has Component_Alignment of
   Storage_Unit.  If SIZE is nonzero, it is the specified size of the field.
   If POS is nonzero, it is the bit position.  If ADDRESSABLE is nonzero, it
   means we are allowed to take the address of the field; if it is negative,
   we should not make a bitfield, which is used by make_aligning_type.  */

tree
create_field_decl (tree field_name, tree field_type, tree record_type,
                   int packed, tree size, tree pos, int addressable)
{
  tree field_decl = build_decl (input_location,
                                FIELD_DECL, field_name, field_type);

  DECL_CONTEXT (field_decl) = record_type;
  TREE_READONLY (field_decl) = TYPE_READONLY (field_type);

  /* If FIELD_TYPE is BLKmode, we must ensure this is aligned to at least a
     byte boundary since GCC cannot handle less-aligned BLKmode bitfields.
     Likewise for an aggregate without specified position that contains an
     array, because in this case slices of variable length of this array
     must be handled by GCC and variable-sized objects need to be aligned
     to at least a byte boundary.  */
  if (packed && (TYPE_MODE (field_type) == BLKmode
                 || (!pos
                     && AGGREGATE_TYPE_P (field_type)
                     && aggregate_type_contains_array_p (field_type))))
    DECL_ALIGN (field_decl) = BITS_PER_UNIT;

  /* If a size is specified, use it.  Otherwise, if the record type is packed
     compute a size to use, which may differ from the object's natural size.
     We always set a size in this case to trigger the checks for bitfield
     creation below, which is typically required when no position has been
     specified.  */
  if (size)
    size = convert (bitsizetype, size);
  else if (packed == 1)
    {
      size = rm_size (field_type);
      if (TYPE_MODE (field_type) == BLKmode)
        size = round_up (size, BITS_PER_UNIT);
    }

  /* If we may, according to ADDRESSABLE, make a bitfield if a size is
     specified for two reasons: first if the size differs from the natural
     size.  Second, if the alignment is insufficient.  There are a number of
     ways the latter can be true.

     We never make a bitfield if the type of the field has a nonconstant size,
     because no such entity requiring bitfield operations should reach here.

     We do *preventively* make a bitfield when there might be the need for it
     but we don't have all the necessary information to decide, as is the case
     of a field with no specified position in a packed record.

     We also don't look at STRICT_ALIGNMENT here, and rely on later processing
     in layout_decl or finish_record_type to clear the bit_field indication if
     it is in fact not needed.  */
  if (addressable >= 0
      && size
      && TREE_CODE (size) == INTEGER_CST
      && TREE_CODE (TYPE_SIZE (field_type)) == INTEGER_CST
      && (!tree_int_cst_equal (size, TYPE_SIZE (field_type))
          || (pos && !value_factor_p (pos, TYPE_ALIGN (field_type)))
          || packed
          || (TYPE_ALIGN (record_type) != 0
              && TYPE_ALIGN (record_type) < TYPE_ALIGN (field_type))))
    {
      DECL_BIT_FIELD (field_decl) = 1;
      DECL_SIZE (field_decl) = size;
      if (!packed && !pos)
        {
          if (TYPE_ALIGN (record_type) != 0
              && TYPE_ALIGN (record_type) < TYPE_ALIGN (field_type))
            DECL_ALIGN (field_decl) = TYPE_ALIGN (record_type);
          else
            DECL_ALIGN (field_decl) = TYPE_ALIGN (field_type);
        }
    }

  DECL_PACKED (field_decl) = pos ? DECL_BIT_FIELD (field_decl) : packed;

  /* Bump the alignment if need be, either for bitfield/packing purposes or
     to satisfy the type requirements if no such consideration applies.  When
     we get the alignment from the type, indicate if this is from an explicit
     user request, which prevents stor-layout from lowering it later on.  */
  {
    unsigned int bit_align
      = (DECL_BIT_FIELD (field_decl) ? 1
         : packed && TYPE_MODE (field_type) != BLKmode ? BITS_PER_UNIT : 0);

    if (bit_align > DECL_ALIGN (field_decl))
      DECL_ALIGN (field_decl) = bit_align;
    else if (!bit_align && TYPE_ALIGN (field_type) > DECL_ALIGN (field_decl))
      {
        DECL_ALIGN (field_decl) = TYPE_ALIGN (field_type);
        DECL_USER_ALIGN (field_decl) = TYPE_USER_ALIGN (field_type);
      }
  }

  if (pos)
    {
      /* We need to pass in the alignment the DECL is known to have.
         This is the lowest-order bit set in POS, but no more than
         the alignment of the record, if one is specified.  Note
         that an alignment of 0 is taken as infinite.  */
      unsigned int known_align;

      if (host_integerp (pos, 1))
        known_align = tree_low_cst (pos, 1) & - tree_low_cst (pos, 1);
      else
        known_align = BITS_PER_UNIT;

      if (TYPE_ALIGN (record_type)
          && (known_align == 0 || known_align > TYPE_ALIGN (record_type)))
        known_align = TYPE_ALIGN (record_type);

      layout_decl (field_decl, known_align);
      SET_DECL_OFFSET_ALIGN (field_decl,
                             host_integerp (pos, 1) ? BIGGEST_ALIGNMENT
                             : BITS_PER_UNIT);
      pos_from_bit (&DECL_FIELD_OFFSET (field_decl),
                    &DECL_FIELD_BIT_OFFSET (field_decl),
                    DECL_OFFSET_ALIGN (field_decl), pos);
    }

  /* In addition to what our caller says, claim the field is addressable if we
     know that its type is not suitable.

     The field may also be "technically" nonaddressable, meaning that even if
     we attempt to take the field's address we will actually get the address
     of a copy.  This is the case for true bitfields, but the DECL_BIT_FIELD
     value we have at this point is not accurate enough, so we don't account
     for this here and let finish_record_type decide.  */
  if (!addressable && !type_for_nonaliased_component_p (field_type))
    addressable = 1;

  DECL_NONADDRESSABLE_P (field_decl) = !addressable;

  return field_decl;
}
\f
/* Return a PARM_DECL node.  PARAM_NAME is the name of the parameter and
   PARAM_TYPE is its type.  READONLY is true if the parameter is readonly
   (either an In parameter or an address of a pass-by-ref parameter).  */

tree
create_param_decl (tree param_name, tree param_type, bool readonly)
{
  tree param_decl = build_decl (input_location,
                                PARM_DECL, param_name, param_type);

  /* Honor TARGET_PROMOTE_PROTOTYPES like the C compiler, as not doing so
     can lead to various ABI violations.  */
  if (targetm.calls.promote_prototypes (NULL_TREE)
      && INTEGRAL_TYPE_P (param_type)
      && TYPE_PRECISION (param_type) < TYPE_PRECISION (integer_type_node))
    {
      /* We have to be careful about biased types here.  Make a subtype
         of integer_type_node with the proper biasing.  */
      if (TREE_CODE (param_type) == INTEGER_TYPE
          && TYPE_BIASED_REPRESENTATION_P (param_type))
        {
          tree subtype
            = make_unsigned_type (TYPE_PRECISION (integer_type_node));
          TREE_TYPE (subtype) = integer_type_node;
          TYPE_BIASED_REPRESENTATION_P (subtype) = 1;
          SET_TYPE_RM_MIN_VALUE (subtype, TYPE_MIN_VALUE (param_type));
          SET_TYPE_RM_MAX_VALUE (subtype, TYPE_MAX_VALUE (param_type));
          param_type = subtype;
        }
      else
        param_type = integer_type_node;
    }

  DECL_ARG_TYPE (param_decl) = param_type;
  TREE_READONLY (param_decl) = readonly;
  return param_decl;
}
\f
/* Given a DECL and ATTR_LIST, process the listed attributes.  */

void
process_attributes (tree decl, struct attrib *attr_list)
{
  for (; attr_list; attr_list = attr_list->next)
    switch (attr_list->type)
      {
      case ATTR_MACHINE_ATTRIBUTE:
        decl_attributes (&decl, tree_cons (attr_list->name, attr_list->args,
                                           NULL_TREE),
                         ATTR_FLAG_TYPE_IN_PLACE);
        break;

      case ATTR_LINK_ALIAS:
        if (! DECL_EXTERNAL (decl))
          {
            TREE_STATIC (decl) = 1;
            assemble_alias (decl, attr_list->name);
          }
        break;

      case ATTR_WEAK_EXTERNAL:
        if (SUPPORTS_WEAK)
          declare_weak (decl);
        else
          post_error ("?weak declarations not supported on this target",
                      attr_list->error_point);
        break;

      case ATTR_LINK_SECTION:
        if (targetm.have_named_sections)
          {
            DECL_SECTION_NAME (decl)
              = build_string (IDENTIFIER_LENGTH (attr_list->name),
                              IDENTIFIER_POINTER (attr_list->name));
            DECL_COMMON (decl) = 0;
          }
        else
          post_error ("?section attributes are not supported for this target",
                      attr_list->error_point);
        break;

      case ATTR_LINK_CONSTRUCTOR:
        DECL_STATIC_CONSTRUCTOR (decl) = 1;
        TREE_USED (decl) = 1;
        break;

      case ATTR_LINK_DESTRUCTOR:
        DECL_STATIC_DESTRUCTOR (decl) = 1;
        TREE_USED (decl) = 1;
        break;

      case ATTR_THREAD_LOCAL_STORAGE:
        DECL_TLS_MODEL (decl) = decl_default_tls_model (decl);
        DECL_COMMON (decl) = 0;
        break;
      }
}
\f
/* Record DECL as a global renaming pointer.  */

void
record_global_renaming_pointer (tree decl)
{
  gcc_assert (DECL_RENAMED_OBJECT (decl));
  VEC_safe_push (tree, gc, global_renaming_pointers, decl);
}

/* Invalidate the global renaming pointers.   */

void
invalidate_global_renaming_pointers (void)
{
  unsigned int i;
  tree iter;

  for (i = 0; VEC_iterate(tree, global_renaming_pointers, i, iter); i++)
    SET_DECL_RENAMED_OBJECT (iter, NULL_TREE);

  VEC_free (tree, gc, global_renaming_pointers);
}

/* Return true if VALUE is a known to be a multiple of FACTOR, which must be
   a power of 2. */

bool
value_factor_p (tree value, HOST_WIDE_INT factor)
{
  if (host_integerp (value, 1))
    return tree_low_cst (value, 1) % factor == 0;

  if (TREE_CODE (value) == MULT_EXPR)
    return (value_factor_p (TREE_OPERAND (value, 0), factor)
            || value_factor_p (TREE_OPERAND (value, 1), factor));

  return false;
}

/* Given 2 consecutive field decls PREV_FIELD and CURR_FIELD, return true
   unless we can prove these 2 fields are laid out in such a way that no gap
   exist between the end of PREV_FIELD and the beginning of CURR_FIELD.  OFFSET
   is the distance in bits between the end of PREV_FIELD and the starting
   position of CURR_FIELD. It is ignored if null. */

static bool
potential_alignment_gap (tree prev_field, tree curr_field, tree offset)
{
  /* If this is the first field of the record, there cannot be any gap */
  if (!prev_field)
    return false;

  /* If the previous field is a union type, then return False: The only
     time when such a field is not the last field of the record is when
     there are other components at fixed positions after it (meaning there
     was a rep clause for every field), in which case we don't want the
     alignment constraint to override them. */
  if (TREE_CODE (TREE_TYPE (prev_field)) == QUAL_UNION_TYPE)
    return false;

  /* If the distance between the end of prev_field and the beginning of
     curr_field is constant, then there is a gap if the value of this
     constant is not null. */
  if (offset && host_integerp (offset, 1))
    return !integer_zerop (offset);

  /* If the size and position of the previous field are constant,
     then check the sum of this size and position. There will be a gap
     iff it is not multiple of the current field alignment. */
  if (host_integerp (DECL_SIZE (prev_field), 1)
      && host_integerp (bit_position (prev_field), 1))
    return ((tree_low_cst (bit_position (prev_field), 1)
             + tree_low_cst (DECL_SIZE (prev_field), 1))
            % DECL_ALIGN (curr_field) != 0);

  /* If both the position and size of the previous field are multiples
     of the current field alignment, there cannot be any gap. */
  if (value_factor_p (bit_position (prev_field), DECL_ALIGN (curr_field))
      && value_factor_p (DECL_SIZE (prev_field), DECL_ALIGN (curr_field)))
    return false;

  /* Fallback, return that there may be a potential gap */
  return true;
}

/* Returns a LABEL_DECL node for LABEL_NAME.  */

tree
create_label_decl (tree label_name)
{
  tree label_decl = build_decl (input_location,
                                LABEL_DECL, label_name, void_type_node);

  DECL_CONTEXT (label_decl)     = current_function_decl;
  DECL_MODE (label_decl)        = VOIDmode;
  DECL_SOURCE_LOCATION (label_decl) = input_location;

  return label_decl;
}
\f
/* Returns a FUNCTION_DECL node.  SUBPROG_NAME is the name of the subprogram,
   ASM_NAME is its assembler name, SUBPROG_TYPE is its type (a FUNCTION_TYPE
   node), PARAM_DECL_LIST is the list of the subprogram arguments (a list of
   PARM_DECL nodes chained through the TREE_CHAIN field).

   INLINE_FLAG, PUBLIC_FLAG, EXTERN_FLAG, and ATTR_LIST are used to set the
   appropriate fields in the FUNCTION_DECL.  GNAT_NODE gives the location.  */

tree
create_subprog_decl (tree subprog_name, tree asm_name,
                     tree subprog_type, tree param_decl_list, bool inline_flag,
                     bool public_flag, bool extern_flag,
                     struct attrib *attr_list, Node_Id gnat_node)
{
  tree return_type  = TREE_TYPE (subprog_type);
  tree subprog_decl = build_decl (input_location,
                                  FUNCTION_DECL, subprog_name, subprog_type);

  /* If this is a non-inline function nested inside an inlined external
     function, we cannot honor both requests without cloning the nested
     function in the current unit since it is private to the other unit.
     We could inline the nested function as well but it's probably better
     to err on the side of too little inlining.  */
  if (!inline_flag
      && current_function_decl
      && DECL_DECLARED_INLINE_P (current_function_decl)
      && DECL_EXTERNAL (current_function_decl))
    DECL_DECLARED_INLINE_P (current_function_decl) = 0;

  DECL_EXTERNAL (subprog_decl)  = extern_flag;
  TREE_PUBLIC (subprog_decl)    = public_flag;
  TREE_STATIC (subprog_decl)    = 1;
  TREE_READONLY (subprog_decl)  = TYPE_READONLY (subprog_type);
  TREE_THIS_VOLATILE (subprog_decl) = TYPE_VOLATILE (subprog_type);
  TREE_SIDE_EFFECTS (subprog_decl) = TYPE_VOLATILE (subprog_type);
  DECL_DECLARED_INLINE_P (subprog_decl) = inline_flag;
  DECL_ARGUMENTS (subprog_decl) = param_decl_list;
  DECL_RESULT (subprog_decl)    = build_decl (input_location,
                                              RESULT_DECL, 0, return_type);
  DECL_ARTIFICIAL (DECL_RESULT (subprog_decl)) = 1;
  DECL_IGNORED_P (DECL_RESULT (subprog_decl)) = 1;

  /* TREE_ADDRESSABLE is set on the result type to request the use of the
     target by-reference return mechanism.  This is not supported all the
     way down to RTL expansion with GCC 4, which ICEs on temporary creation
     attempts with such a type and expects DECL_BY_REFERENCE to be set on
     the RESULT_DECL instead - see gnat_genericize for more details.  */
  if (TREE_ADDRESSABLE (TREE_TYPE (DECL_RESULT (subprog_decl))))
    {
      tree result_decl = DECL_RESULT (subprog_decl);

      TREE_ADDRESSABLE (TREE_TYPE (result_decl)) = 0;
      DECL_BY_REFERENCE (result_decl) = 1;
    }

  if (asm_name)
    {
      SET_DECL_ASSEMBLER_NAME (subprog_decl, asm_name);

      /* The expand_main_function circuitry expects "main_identifier_node" to
         designate the DECL_NAME of the 'main' entry point, in turn expected
         to be declared as the "main" function literally by default.  Ada
         program entry points are typically declared with a different name
         within the binder generated file, exported as 'main' to satisfy the
         system expectations.  Force main_identifier_node in this case.  */
      if (asm_name == main_identifier_node)
        DECL_NAME (subprog_decl) = main_identifier_node;
    }

  process_attributes (subprog_decl, attr_list);

  /* Add this decl to the current binding level.  */
  gnat_pushdecl (subprog_decl, gnat_node);

  /* Output the assembler code and/or RTL for the declaration.  */
  rest_of_decl_compilation (subprog_decl, global_bindings_p (), 0);

  return subprog_decl;
}
\f
/* Set up the framework for generating code for SUBPROG_DECL, a subprogram
   body.  This routine needs to be invoked before processing the declarations
   appearing in the subprogram.  */

void
begin_subprog_body (tree subprog_decl)
{
  tree param_decl;

  current_function_decl = subprog_decl;
  announce_function (subprog_decl);

  /* Enter a new binding level and show that all the parameters belong to
     this function.  */
  gnat_pushlevel ();
  for (param_decl = DECL_ARGUMENTS (subprog_decl); param_decl;
       param_decl = TREE_CHAIN (param_decl))
    DECL_CONTEXT (param_decl) = subprog_decl;

  make_decl_rtl (subprog_decl);

  /* We handle pending sizes via the elaboration of types, so we don't need to
     save them.  This causes them to be marked as part of the outer function
     and then discarded.  */
  get_pending_sizes ();
}


/* Helper for the genericization callback.  Return a dereference of VAL
   if it is of a reference type.  */

static tree
convert_from_reference (tree val)
{
  tree value_type, ref;

  if (TREE_CODE (TREE_TYPE (val)) != REFERENCE_TYPE)
    return val;

  value_type =  TREE_TYPE (TREE_TYPE (val));
  ref = build1 (INDIRECT_REF, value_type, val);

  /* See if what we reference is CONST or VOLATILE, which requires
     looking into array types to get to the component type.  */

  while (TREE_CODE (value_type) == ARRAY_TYPE)
    value_type = TREE_TYPE (value_type);

  TREE_READONLY (ref)
    = (TYPE_QUALS (value_type) & TYPE_QUAL_CONST);
  TREE_THIS_VOLATILE (ref)
    = (TYPE_QUALS (value_type) & TYPE_QUAL_VOLATILE);

  TREE_SIDE_EFFECTS (ref)
    = (TREE_THIS_VOLATILE (ref) || TREE_SIDE_EFFECTS (val));

  return ref;
}

/* Helper for the genericization callback.  Returns true if T denotes
   a RESULT_DECL with DECL_BY_REFERENCE set.  */

static inline bool
is_byref_result (tree t)
{
  return (TREE_CODE (t) == RESULT_DECL && DECL_BY_REFERENCE (t));
}


/* Tree walking callback for gnat_genericize. Currently ...

   o Adjust references to the function's DECL_RESULT if it is marked
     DECL_BY_REFERENCE and so has had its type turned into a reference
     type at the end of the function compilation.  */

static tree
gnat_genericize_r (tree *stmt_p, int *walk_subtrees, void *data)
{
  /* This implementation is modeled after what the C++ front-end is
     doing, basis of the downstream passes behavior.  */

  tree stmt = *stmt_p;
  struct pointer_set_t *p_set = (struct pointer_set_t*) data;

  /* If we have a direct mention of the result decl, dereference.  */
  if (is_byref_result (stmt))
    {
      *stmt_p = convert_from_reference (stmt);
      *walk_subtrees = 0;
      return NULL;
    }

  /* Otherwise, no need to walk the same tree twice.  */
  if (pointer_set_contains (p_set, stmt))
    {
      *walk_subtrees = 0;
      return NULL_TREE;
    }

  /* If we are taking the address of what now is a reference, just get the
     reference value.  */
  if (TREE_CODE (stmt) == ADDR_EXPR
      && is_byref_result (TREE_OPERAND (stmt, 0)))
    {
      *stmt_p = convert (TREE_TYPE (stmt), TREE_OPERAND (stmt, 0));
      *walk_subtrees = 0;
    }

  /* Don't dereference an by-reference RESULT_DECL inside a RETURN_EXPR.  */
  else if (TREE_CODE (stmt) == RETURN_EXPR
           && TREE_OPERAND (stmt, 0)
           && is_byref_result (TREE_OPERAND (stmt, 0)))
    *walk_subtrees = 0;

  /* Don't look inside trees that cannot embed references of interest.  */
  else if (IS_TYPE_OR_DECL_P (stmt))
    *walk_subtrees = 0;

  pointer_set_insert (p_set, *stmt_p);

  return NULL;
}

/* Perform lowering of Ada trees to GENERIC. In particular:

   o Turn a DECL_BY_REFERENCE RESULT_DECL into a real by-reference decl
     and adjust all the references to this decl accordingly.  */

static void
gnat_genericize (tree fndecl)
{
  /* Prior to GCC 4, an explicit By_Reference result mechanism for a function
     was handled by simply setting TREE_ADDRESSABLE on the result type.
     Everything required to actually pass by invisible ref using the target
     mechanism (e.g. extra parameter) was handled at RTL expansion time.

     This doesn't work with GCC 4 any more for several reasons.  First, the
     gimplification process might need the creation of temporaries of this
     type, and the gimplifier ICEs on such attempts.  Second, the middle-end
     now relies on a different attribute for such cases (DECL_BY_REFERENCE on
     RESULT/PARM_DECLs), and expects the user invisible by-reference-ness to
     be explicitly accounted for by the front-end in the function body.

     We achieve the complete transformation in two steps:

     1/ create_subprog_decl performs early attribute tweaks: it clears
        TREE_ADDRESSABLE from the result type and sets DECL_BY_REFERENCE on
        the result decl.  The former ensures that the bit isn't set in the GCC
        tree saved for the function, so prevents ICEs on temporary creation.
        The latter we use here to trigger the rest of the processing.

     2/ This function performs the type transformation on the result decl
        and adjusts all the references to this decl from the function body
        accordingly.

     Clearing TREE_ADDRESSABLE from the type differs from the C++ front-end
     strategy, which escapes the gimplifier temporary creation issues by
     creating it's own temporaries using TARGET_EXPR nodes.  Our way relies
     on simple specific support code in aggregate_value_p to look at the
     target function result decl explicitly.  */

  struct pointer_set_t *p_set;
  tree decl_result = DECL_RESULT (fndecl);

  if (!DECL_BY_REFERENCE (decl_result))
    return;

  /* Make the DECL_RESULT explicitly by-reference and adjust all the
     occurrences in the function body using the common tree-walking facility.
     We want to see every occurrence of the result decl to adjust the
     referencing tree, so need to use our own pointer set to control which
     trees should be visited again or not.  */

  p_set = pointer_set_create ();

  TREE_TYPE (decl_result) = build_reference_type (TREE_TYPE (decl_result));
  TREE_ADDRESSABLE (decl_result) = 0;
  relayout_decl (decl_result);

  walk_tree (&DECL_SAVED_TREE (fndecl), gnat_genericize_r, p_set, NULL);

  pointer_set_destroy (p_set);
}

/* Finish the definition of the current subprogram BODY and finalize it.  */

void
end_subprog_body (tree body)
{
  tree fndecl = current_function_decl;

  /* Mark the BLOCK for this level as being for this function and pop the
     level.  Since the vars in it are the parameters, clear them.  */
  BLOCK_VARS (current_binding_level->block) = 0;
  BLOCK_SUPERCONTEXT (current_binding_level->block) = fndecl;
  DECL_INITIAL (fndecl) = current_binding_level->block;
  gnat_poplevel ();

  /* We handle pending sizes via the elaboration of types, so we don't
     need to save them.  */
  get_pending_sizes ();

  /* Mark the RESULT_DECL as being in this subprogram. */
  DECL_CONTEXT (DECL_RESULT (fndecl)) = fndecl;

  DECL_SAVED_TREE (fndecl) = body;

  current_function_decl = DECL_CONTEXT (fndecl);
  set_cfun (NULL);

  /* We cannot track the location of errors past this point.  */
  error_gnat_node = Empty;

  /* If we're only annotating types, don't actually compile this function.  */
  if (type_annotate_only)
    return;

  /* Perform the required pre-gimplification transformations on the tree.  */
  gnat_genericize (fndecl);

  /* Dump functions before gimplification.  */
  dump_function (TDI_original, fndecl);

  /* ??? This special handling of nested functions is probably obsolete.  */
  if (!DECL_CONTEXT (fndecl))
    cgraph_finalize_function (fndecl, false);
  else
    /* Register this function with cgraph just far enough to get it
       added to our parent's nested function list.  */
    (void) cgraph_node (fndecl);
}

tree
gnat_builtin_function (tree decl)
{
  gnat_pushdecl (decl, Empty);
  return decl;
}

/* Return an integer type with the number of bits of precision given by
   PRECISION.  UNSIGNEDP is nonzero if the type is unsigned; otherwise
   it is a signed type.  */

tree
gnat_type_for_size (unsigned precision, int unsignedp)
{
  tree t;
  char type_name[20];

  if (precision <= 2 * MAX_BITS_PER_WORD
      && signed_and_unsigned_types[precision][unsignedp])
    return signed_and_unsigned_types[precision][unsignedp];

 if (unsignedp)
    t = make_unsigned_type (precision);
  else
    t = make_signed_type (precision);

  if (precision <= 2 * MAX_BITS_PER_WORD)
    signed_and_unsigned_types[precision][unsignedp] = t;

  if (!TYPE_NAME (t))
    {
      sprintf (type_name, "%sSIGNED_%d", unsignedp ? "UN" : "", precision);
      TYPE_NAME (t) = get_identifier (type_name);
    }

  return t;
}

/* Likewise for floating-point types.  */

static tree
float_type_for_precision (int precision, enum machine_mode mode)
{
  tree t;
  char type_name[20];

  if (float_types[(int) mode])
    return float_types[(int) mode];

  float_types[(int) mode] = t = make_node (REAL_TYPE);
  TYPE_PRECISION (t) = precision;
  layout_type (t);

  gcc_assert (TYPE_MODE (t) == mode);
  if (!TYPE_NAME (t))
    {
      sprintf (type_name, "FLOAT_%d", precision);
      TYPE_NAME (t) = get_identifier (type_name);
    }

  return t;
}

/* Return a data type that has machine mode MODE.  UNSIGNEDP selects
   an unsigned type; otherwise a signed type is returned.  */

tree
gnat_type_for_mode (enum machine_mode mode, int unsignedp)
{
  if (mode == BLKmode)
    return NULL_TREE;

  if (mode == VOIDmode)
    return void_type_node;

  if (COMPLEX_MODE_P (mode))
    return NULL_TREE;

  if (SCALAR_FLOAT_MODE_P (mode))
    return float_type_for_precision (GET_MODE_PRECISION (mode), mode);

  if (SCALAR_INT_MODE_P (mode))
    return gnat_type_for_size (GET_MODE_BITSIZE (mode), unsignedp);

  if (VECTOR_MODE_P (mode))
    {
      enum machine_mode inner_mode = GET_MODE_INNER (mode);
      tree inner_type = gnat_type_for_mode (inner_mode, unsignedp);
      if (inner_type)
        return build_vector_type_for_mode (inner_type, mode);
    }

  return NULL_TREE;
}

/* Return the unsigned version of a TYPE_NODE, a scalar type.  */

tree
gnat_unsigned_type (tree type_node)
{
  tree type = gnat_type_for_size (TYPE_PRECISION (type_node), 1);

  if (TREE_CODE (type_node) == INTEGER_TYPE && TYPE_MODULAR_P (type_node))
    {
      type = copy_node (type);
      TREE_TYPE (type) = type_node;
    }
  else if (TREE_TYPE (type_node)
           && TREE_CODE (TREE_TYPE (type_node)) == INTEGER_TYPE
           && TYPE_MODULAR_P (TREE_TYPE (type_node)))
    {
      type = copy_node (type);
      TREE_TYPE (type) = TREE_TYPE (type_node);
    }

  return type;
}

/* Return the signed version of a TYPE_NODE, a scalar type.  */

tree
gnat_signed_type (tree type_node)
{
  tree type = gnat_type_for_size (TYPE_PRECISION (type_node), 0);

  if (TREE_CODE (type_node) == INTEGER_TYPE && TYPE_MODULAR_P (type_node))
    {
      type = copy_node (type);
      TREE_TYPE (type) = type_node;
    }
  else if (TREE_TYPE (type_node)
           && TREE_CODE (TREE_TYPE (type_node)) == INTEGER_TYPE
           && TYPE_MODULAR_P (TREE_TYPE (type_node)))
    {
      type = copy_node (type);
      TREE_TYPE (type) = TREE_TYPE (type_node);
    }

  return type;
}

/* Return 1 if the types T1 and T2 are compatible, i.e. if they can be
   transparently converted to each other.  */

int
gnat_types_compatible_p (tree t1, tree t2)
{
  enum tree_code code;

  /* This is the default criterion.  */
  if (TYPE_MAIN_VARIANT (t1) == TYPE_MAIN_VARIANT (t2))
    return 1;

  /* We only check structural equivalence here.  */
  if ((code = TREE_CODE (t1)) != TREE_CODE (t2))
    return 0;

  /* Vector types are also compatible if they have the same number of subparts
     and the same form of (scalar) element type.  */
  if (code == VECTOR_TYPE
      && TYPE_VECTOR_SUBPARTS (t1) == TYPE_VECTOR_SUBPARTS (t2)
      && TREE_CODE (TREE_TYPE (t1)) == TREE_CODE (TREE_TYPE (t2))
      && TYPE_PRECISION (TREE_TYPE (t1)) == TYPE_PRECISION (TREE_TYPE (t2)))
    return 1;

  /* Array types are also compatible if they are constrained and have
     the same component type and the same domain.  */
  if (code == ARRAY_TYPE
      && TREE_TYPE (t1) == TREE_TYPE (t2)
      && (TYPE_DOMAIN (t1) == TYPE_DOMAIN (t2)
          || (TYPE_DOMAIN (t1)
              && TYPE_DOMAIN (t2)
              && tree_int_cst_equal (TYPE_MIN_VALUE (TYPE_DOMAIN (t1)),
                                     TYPE_MIN_VALUE (TYPE_DOMAIN (t2)))
              && tree_int_cst_equal (TYPE_MAX_VALUE (TYPE_DOMAIN (t1)),
                                     TYPE_MAX_VALUE (TYPE_DOMAIN (t2))))))
    return 1;

  /* Padding record types are also compatible if they pad the same
     type and have the same constant size.  */
  if (code == RECORD_TYPE
      && TYPE_PADDING_P (t1) && TYPE_PADDING_P (t2)
      && TREE_TYPE (TYPE_FIELDS (t1)) == TREE_TYPE (TYPE_FIELDS (t2))
      && tree_int_cst_equal (TYPE_SIZE (t1), TYPE_SIZE (t2)))
    return 1;

  return 0;
}
\f
/* EXP is an expression for the size of an object.  If this size contains
   discriminant references, replace them with the maximum (if MAX_P) or
   minimum (if !MAX_P) possible value of the discriminant.  */

tree
max_size (tree exp, bool max_p)
{
  enum tree_code code = TREE_CODE (exp);
  tree type = TREE_TYPE (exp);

  switch (TREE_CODE_CLASS (code))
    {
    case tcc_declaration:
    case tcc_constant:
      return exp;

    case tcc_vl_exp:
      if (code == CALL_EXPR)
        {
          tree t, *argarray;
          int n, i;

          t = maybe_inline_call_in_expr (exp);
          if (t)
            return max_size (t, max_p);

          n = call_expr_nargs (exp);
          gcc_assert (n > 0);
          argarray = (tree *) alloca (n * sizeof (tree));
          for (i = 0; i < n; i++)
            argarray[i] = max_size (CALL_EXPR_ARG (exp, i), max_p);
          return build_call_array (type, CALL_EXPR_FN (exp), n, argarray);
        }
      break;

    case tcc_reference:
      /* If this contains a PLACEHOLDER_EXPR, it is the thing we want to
         modify.  Otherwise, we treat it like a variable.  */
      if (!CONTAINS_PLACEHOLDER_P (exp))
        return exp;

      type = TREE_TYPE (TREE_OPERAND (exp, 1));
      return
        max_size (max_p ? TYPE_MAX_VALUE (type) : TYPE_MIN_VALUE (type), true);

    case tcc_comparison:
      return max_p ? size_one_node : size_zero_node;

    case tcc_unary:
    case tcc_binary:
    case tcc_expression:
      switch (TREE_CODE_LENGTH (code))
        {
        case 1:
          if (code == NON_LVALUE_EXPR)
            return max_size (TREE_OPERAND (exp, 0), max_p);
          else
            return
              fold_build1 (code, type,
                           max_size (TREE_OPERAND (exp, 0),
                                     code == NEGATE_EXPR ? !max_p : max_p));

        case 2:
          if (code == COMPOUND_EXPR)
            return max_size (TREE_OPERAND (exp, 1), max_p);

          /* Calculate "(A ? B : C) - D" as "A ? B - D : C - D" which
             may provide a tighter bound on max_size.  */
          if (code == MINUS_EXPR
              && TREE_CODE (TREE_OPERAND (exp, 0)) == COND_EXPR)
            {
              tree lhs = fold_build2 (MINUS_EXPR, type,
                                      TREE_OPERAND (TREE_OPERAND (exp, 0), 1),
                                      TREE_OPERAND (exp, 1));
              tree rhs = fold_build2 (MINUS_EXPR, type,
                                      TREE_OPERAND (TREE_OPERAND (exp, 0), 2),
                                      TREE_OPERAND (exp, 1));
              return fold_build2 (max_p ? MAX_EXPR : MIN_EXPR, type,
                                  max_size (lhs, max_p),
                                  max_size (rhs, max_p));
            }

          {
            tree lhs = max_size (TREE_OPERAND (exp, 0), max_p);
            tree rhs = max_size (TREE_OPERAND (exp, 1),
                                 code == MINUS_EXPR ? !max_p : max_p);

            /* Special-case wanting the maximum value of a MIN_EXPR.
               In that case, if one side overflows, return the other.
               sizetype is signed, but we know sizes are non-negative.
               Likewise, handle a MINUS_EXPR or PLUS_EXPR with the LHS
               overflowing or the maximum possible value and the RHS
               a variable.  */
            if (max_p
                && code == MIN_EXPR
                && TREE_CODE (rhs) == INTEGER_CST
                && TREE_OVERFLOW (rhs))
              return lhs;
            else if (max_p
                     && code == MIN_EXPR
                     && TREE_CODE (lhs) == INTEGER_CST
                     && TREE_OVERFLOW (lhs))
              return rhs;
            else if ((code == MINUS_EXPR || code == PLUS_EXPR)
                     && ((TREE_CODE (lhs) == INTEGER_CST
                          && TREE_OVERFLOW (lhs))
                         || operand_equal_p (lhs, TYPE_MAX_VALUE (type), 0))
                     && !TREE_CONSTANT (rhs))
              return lhs;
            else
              return fold_build2 (code, type, lhs, rhs);
          }

        case 3:
          if (code == SAVE_EXPR)
            return exp;
          else if (code == COND_EXPR)
            return fold_build2 (max_p ? MAX_EXPR : MIN_EXPR, type,
                                max_size (TREE_OPERAND (exp, 1), max_p),
                                max_size (TREE_OPERAND (exp, 2), max_p));
        }

      /* Other tree classes cannot happen.  */
    default:
      break;
    }

  gcc_unreachable ();
}
\f
/* Build a template of type TEMPLATE_TYPE from the array bounds of ARRAY_TYPE.
   EXPR is an expression that we can use to locate any PLACEHOLDER_EXPRs.
   Return a constructor for the template.  */

tree
build_template (tree template_type, tree array_type, tree expr)
{
  tree template_elts = NULL_TREE;
  tree bound_list = NULL_TREE;
  tree field;

  while (TREE_CODE (array_type) == RECORD_TYPE
         && (TYPE_PADDING_P (array_type)
             || TYPE_JUSTIFIED_MODULAR_P (array_type)))
    array_type = TREE_TYPE (TYPE_FIELDS (array_type));

  if (TREE_CODE (array_type) == ARRAY_TYPE
      || (TREE_CODE (array_type) == INTEGER_TYPE
          && TYPE_HAS_ACTUAL_BOUNDS_P (array_type)))
    bound_list = TYPE_ACTUAL_BOUNDS (array_type);

  /* First make the list for a CONSTRUCTOR for the template.  Go down the
     field list of the template instead of the type chain because this
     array might be an Ada array of arrays and we can't tell where the
     nested arrays stop being the underlying object.  */

  for (field = TYPE_FIELDS (template_type); field;
       (bound_list
        ? (bound_list = TREE_CHAIN (bound_list))
        : (array_type = TREE_TYPE (array_type))),
       field = TREE_CHAIN (TREE_CHAIN (field)))
    {
      tree bounds, min, max;

      /* If we have a bound list, get the bounds from there.  Likewise
         for an ARRAY_TYPE.  Otherwise, if expr is a PARM_DECL with
         DECL_BY_COMPONENT_PTR_P, use the bounds of the field in the template.
         This will give us a maximum range.  */
      if (bound_list)
        bounds = TREE_VALUE (bound_list);
      else if (TREE_CODE (array_type) == ARRAY_TYPE)
        bounds = TYPE_INDEX_TYPE (TYPE_DOMAIN (array_type));
      else if (expr && TREE_CODE (expr) == PARM_DECL
               && DECL_BY_COMPONENT_PTR_P (expr))
        bounds = TREE_TYPE (field);
      else
        gcc_unreachable ();

      min = convert (TREE_TYPE (field), TYPE_MIN_VALUE (bounds));
      max = convert (TREE_TYPE (TREE_CHAIN (field)), TYPE_MAX_VALUE (bounds));

      /* If either MIN or MAX involve a PLACEHOLDER_EXPR, we must
         substitute it from OBJECT.  */
      min = SUBSTITUTE_PLACEHOLDER_IN_EXPR (min, expr);
      max = SUBSTITUTE_PLACEHOLDER_IN_EXPR (max, expr);

      template_elts = tree_cons (TREE_CHAIN (field), max,
                                 tree_cons (field, min, template_elts));
    }

  return gnat_build_constructor (template_type, nreverse (template_elts));
}
\f
/* Build a 32bit VMS descriptor from a Mechanism_Type, which must specify
   a descriptor type, and the GCC type of an object.  Each FIELD_DECL
   in the type contains in its DECL_INITIAL the expression to use when
   a constructor is made for the type.  GNAT_ENTITY is an entity used
   to print out an error message if the mechanism cannot be applied to
   an object of that type and also for the name.  */

tree
build_vms_descriptor32 (tree type, Mechanism_Type mech, Entity_Id gnat_entity)
{
  tree record_type = make_node (RECORD_TYPE);
  tree pointer32_type;
  tree field_list = 0;
  int klass;
  int dtype = 0;
  tree inner_type;
  int ndim;
  int i;
  tree *idx_arr;
  tree tem;

  /* If TYPE is an unconstrained array, use the underlying array type.  */
  if (TREE_CODE (type) == UNCONSTRAINED_ARRAY_TYPE)
    type = TREE_TYPE (TREE_TYPE (TYPE_FIELDS (TREE_TYPE (type))));

  /* If this is an array, compute the number of dimensions in the array,
     get the index types, and point to the inner type.  */
  if (TREE_CODE (type) != ARRAY_TYPE)
    ndim = 0;
  else
    for (ndim = 1, inner_type = type;
         TREE_CODE (TREE_TYPE (inner_type)) == ARRAY_TYPE
         && TYPE_MULTI_ARRAY_P (TREE_TYPE (inner_type));
         ndim++, inner_type = TREE_TYPE (inner_type))
      ;

  idx_arr = (tree *) alloca (ndim * sizeof (tree));

  if (mech != By_Descriptor_NCA && mech != By_Short_Descriptor_NCA
      && TREE_CODE (type) == ARRAY_TYPE && TYPE_CONVENTION_FORTRAN_P (type))
    for (i = ndim - 1, inner_type = type;
         i >= 0;
         i--, inner_type = TREE_TYPE (inner_type))
      idx_arr[i] = TYPE_DOMAIN (inner_type);
  else
    for (i = 0, inner_type = type;
         i < ndim;
         i++, inner_type = TREE_TYPE (inner_type))
      idx_arr[i] = TYPE_DOMAIN (inner_type);

  /* Now get the DTYPE value.  */
  switch (TREE_CODE (type))
    {
    case INTEGER_TYPE:
    case ENUMERAL_TYPE:
    case BOOLEAN_TYPE:
      if (TYPE_VAX_FLOATING_POINT_P (type))
        switch (tree_low_cst (TYPE_DIGITS_VALUE (type), 1))
          {
          case 6:
            dtype = 10;
            break;
          case 9:
            dtype = 11;
            break;
          case 15:
            dtype = 27;
            break;
          }
      else
        switch (GET_MODE_BITSIZE (TYPE_MODE (type)))
          {
          case 8:
            dtype = TYPE_UNSIGNED (type) ? 2 : 6;
            break;
          case 16:
            dtype = TYPE_UNSIGNED (type) ? 3 : 7;
            break;
          case 32:
            dtype = TYPE_UNSIGNED (type) ? 4 : 8;
            break;
          case 64:
            dtype = TYPE_UNSIGNED (type) ? 5 : 9;
            break;
          case 128:
            dtype = TYPE_UNSIGNED (type) ? 25 : 26;
            break;
          }
      break;

    case REAL_TYPE:
      dtype = GET_MODE_BITSIZE (TYPE_MODE (type)) == 32 ? 52 : 53;
      break;

    case COMPLEX_TYPE:
      if (TREE_CODE (TREE_TYPE (type)) == INTEGER_TYPE
          && TYPE_VAX_FLOATING_POINT_P (type))
        switch (tree_low_cst (TYPE_DIGITS_VALUE (type), 1))
          {
          case 6:
            dtype = 12;
            break;
          case 9:
            dtype = 13;
            break;
          case 15:
            dtype = 29;
          }
      else
        dtype = GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (type))) == 32 ? 54: 55;
      break;

    case ARRAY_TYPE:
      dtype = 14;
      break;

    default:
      break;
    }

  /* Get the CLASS value.  */
  switch (mech)
    {
    case By_Descriptor_A:
    case By_Short_Descriptor_A:
      klass = 4;
      break;
    case By_Descriptor_NCA:
    case By_Short_Descriptor_NCA:
      klass = 10;
      break;
    case By_Descriptor_SB:
    case By_Short_Descriptor_SB:
      klass = 15;
      break;
    case By_Descriptor:
    case By_Short_Descriptor:
    case By_Descriptor_S:
    case By_Short_Descriptor_S:
    default:
      klass = 1;
      break;
    }

  /* Make the type for a descriptor for VMS.  The first four fields
     are the same for all types.  */

  field_list
    = chainon (field_list,
               make_descriptor_field
               ("LENGTH", gnat_type_for_size (16, 1), record_type,
                size_in_bytes ((mech == By_Descriptor_A ||
                                mech == By_Short_Descriptor_A)
                               ? inner_type : type)));

  field_list = chainon (field_list,
                        make_descriptor_field ("DTYPE",
                                               gnat_type_for_size (8, 1),
                                               record_type, size_int (dtype)));
  field_list = chainon (field_list,
                        make_descriptor_field ("CLASS",
                                               gnat_type_for_size (8, 1),
                                               record_type, size_int (klass)));

  /* Of course this will crash at run-time if the address space is not
     within the low 32 bits, but there is nothing else we can do.  */
  pointer32_type = build_pointer_type_for_mode (type, SImode, false);

  field_list
    = chainon (field_list,
               make_descriptor_field
               ("POINTER", pointer32_type, record_type,
                build_unary_op (ADDR_EXPR,
                                pointer32_type,
                                build0 (PLACEHOLDER_EXPR, type))));

  switch (mech)
    {
    case By_Descriptor:
    case By_Short_Descriptor:
    case By_Descriptor_S:
    case By_Short_Descriptor_S:
      break;

    case By_Descriptor_SB:
    case By_Short_Descriptor_SB:
      field_list
        = chainon (field_list,
                   make_descriptor_field
                   ("SB_L1", gnat_type_for_size (32, 1), record_type,
                    TREE_CODE (type) == ARRAY_TYPE
                    ? TYPE_MIN_VALUE (TYPE_DOMAIN (type)) : size_zero_node));
      field_list
        = chainon (field_list,
                   make_descriptor_field
                   ("SB_U1", gnat_type_for_size (32, 1), record_type,
                    TREE_CODE (type) == ARRAY_TYPE
                    ? TYPE_MAX_VALUE (TYPE_DOMAIN (type)) : size_zero_node));
      break;

    case By_Descriptor_A:
    case By_Short_Descriptor_A:
    case By_Descriptor_NCA:
    case By_Short_Descriptor_NCA:
      field_list = chainon (field_list,
                            make_descriptor_field ("SCALE",
                                                   gnat_type_for_size (8, 1),
                                                   record_type,
                                                   size_zero_node));

      field_list = chainon (field_list,
                            make_descriptor_field ("DIGITS",
                                                   gnat_type_for_size (8, 1),
                                                   record_type,
                                                   size_zero_node));

      field_list
        = chainon (field_list,
                   make_descriptor_field
                   ("AFLAGS", gnat_type_for_size (8, 1), record_type,
                    size_int ((mech == By_Descriptor_NCA ||
                              mech == By_Short_Descriptor_NCA)
                              ? 0
                              /* Set FL_COLUMN, FL_COEFF, and FL_BOUNDS.  */
                              : (TREE_CODE (type) == ARRAY_TYPE
                                 && TYPE_CONVENTION_FORTRAN_P (type)
                                 ? 224 : 192))));

      field_list = chainon (field_list,
                            make_descriptor_field ("DIMCT",
                                                   gnat_type_for_size (8, 1),
                                                   record_type,
                                                   size_int (ndim)));

      field_list = chainon (field_list,
                            make_descriptor_field ("ARSIZE",
                                                   gnat_type_for_size (32, 1),
                                                   record_type,
                                                   size_in_bytes (type)));

      /* Now build a pointer to the 0,0,0... element.  */
      tem = build0 (PLACEHOLDER_EXPR, type);
      for (i = 0, inner_type = type; i < ndim;
           i++, inner_type = TREE_TYPE (inner_type))
        tem = build4 (ARRAY_REF, TREE_TYPE (inner_type), tem,
                      convert (TYPE_DOMAIN (inner_type), size_zero_node),
                      NULL_TREE, NULL_TREE);

      field_list
        = chainon (field_list,
                   make_descriptor_field
                   ("A0",
                    build_pointer_type_for_mode (inner_type, SImode, false),
                    record_type,
                    build1 (ADDR_EXPR,
                            build_pointer_type_for_mode (inner_type, SImode,
                                                         false),
                            tem)));

      /* Next come the addressing coefficients.  */
      tem = size_one_node;
      for (i = 0; i < ndim; i++)
        {
          char fname[3];
          tree idx_length
            = size_binop (MULT_EXPR, tem,
                          size_binop (PLUS_EXPR,
                                      size_binop (MINUS_EXPR,
                                                  TYPE_MAX_VALUE (idx_arr[i]),
                                                  TYPE_MIN_VALUE (idx_arr[i])),
                                      size_int (1)));

          fname[0] = ((mech == By_Descriptor_NCA ||
                       mech == By_Short_Descriptor_NCA) ? 'S' : 'M');
          fname[1] = '0' + i, fname[2] = 0;
          field_list
            = chainon (field_list,
                       make_descriptor_field (fname,
                                              gnat_type_for_size (32, 1),
                                              record_type, idx_length));

          if (mech == By_Descriptor_NCA || mech == By_Short_Descriptor_NCA)
            tem = idx_length;
        }

      /* Finally here are the bounds.  */
      for (i = 0; i < ndim; i++)
        {
          char fname[3];

          fname[0] = 'L', fname[1] = '0' + i, fname[2] = 0;
          field_list
            = chainon (field_list,
                       make_descriptor_field
                       (fname, gnat_type_for_size (32, 1), record_type,
                        TYPE_MIN_VALUE (idx_arr[i])));

          fname[0] = 'U';
          field_list
            = chainon (field_list,
                       make_descriptor_field
                       (fname, gnat_type_for_size (32, 1), record_type,
                        TYPE_MAX_VALUE (idx_arr[i])));
        }
      break;

    default:
      post_error ("unsupported descriptor type for &", gnat_entity);
    }

  TYPE_NAME (record_type) = create_concat_name (gnat_entity, "DESC");
  finish_record_type (record_type, field_list, 0, false);
  return record_type;
}

/* Build a 64bit VMS descriptor from a Mechanism_Type, which must specify
   a descriptor type, and the GCC type of an object.  Each FIELD_DECL
   in the type contains in its DECL_INITIAL the expression to use when
   a constructor is made for the type.  GNAT_ENTITY is an entity used
   to print out an error message if the mechanism cannot be applied to
   an object of that type and also for the name.  */

tree
build_vms_descriptor (tree type, Mechanism_Type mech, Entity_Id gnat_entity)
{
  tree record64_type = make_node (RECORD_TYPE);
  tree pointer64_type;
  tree field_list64 = 0;
  int klass;
  int dtype = 0;
  tree inner_type;
  int ndim;
  int i;
  tree *idx_arr;
  tree tem;

  /* If TYPE is an unconstrained array, use the underlying array type.  */
  if (TREE_CODE (type) == UNCONSTRAINED_ARRAY_TYPE)
    type = TREE_TYPE (TREE_TYPE (TYPE_FIELDS (TREE_TYPE (type))));

  /* If this is an array, compute the number of dimensions in the array,
     get the index types, and point to the inner type.  */
  if (TREE_CODE (type) != ARRAY_TYPE)
    ndim = 0;
  else
    for (ndim = 1, inner_type = type;
         TREE_CODE (TREE_TYPE (inner_type)) == ARRAY_TYPE
         && TYPE_MULTI_ARRAY_P (TREE_TYPE (inner_type));
         ndim++, inner_type = TREE_TYPE (inner_type))
      ;

  idx_arr = (tree *) alloca (ndim * sizeof (tree));

  if (mech != By_Descriptor_NCA
      && TREE_CODE (type) == ARRAY_TYPE && TYPE_CONVENTION_FORTRAN_P (type))
    for (i = ndim - 1, inner_type = type;
         i >= 0;
         i--, inner_type = TREE_TYPE (inner_type))
      idx_arr[i] = TYPE_DOMAIN (inner_type);
  else
    for (i = 0, inner_type = type;
         i < ndim;
         i++, inner_type = TREE_TYPE (inner_type))
      idx_arr[i] = TYPE_DOMAIN (inner_type);

  /* Now get the DTYPE value.  */
  switch (TREE_CODE (type))
    {
    case INTEGER_TYPE:
    case ENUMERAL_TYPE:
    case BOOLEAN_TYPE:
      if (TYPE_VAX_FLOATING_POINT_P (type))
        switch (tree_low_cst (TYPE_DIGITS_VALUE (type), 1))
          {
          case 6:
            dtype = 10;
            break;
          case 9:
            dtype = 11;
            break;
          case 15:
            dtype = 27;
            break;
          }
      else
        switch (GET_MODE_BITSIZE (TYPE_MODE (type)))
          {
          case 8:
            dtype = TYPE_UNSIGNED (type) ? 2 : 6;
            break;
          case 16:
            dtype = TYPE_UNSIGNED (type) ? 3 : 7;
            break;
          case 32:
            dtype = TYPE_UNSIGNED (type) ? 4 : 8;
            break;
          case 64:
            dtype = TYPE_UNSIGNED (type) ? 5 : 9;
            break;
          case 128:
            dtype = TYPE_UNSIGNED (type) ? 25 : 26;
            break;
          }
      break;

    case REAL_TYPE:
      dtype = GET_MODE_BITSIZE (TYPE_MODE (type)) == 32 ? 52 : 53;
      break;

    case COMPLEX_TYPE:
      if (TREE_CODE (TREE_TYPE (type)) == INTEGER_TYPE
          && TYPE_VAX_FLOATING_POINT_P (type))
        switch (tree_low_cst (TYPE_DIGITS_VALUE (type), 1))
          {
          case 6:
            dtype = 12;
            break;
          case 9:
            dtype = 13;
            break;
          case 15:
            dtype = 29;
          }
      else
        dtype = GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (type))) == 32 ? 54: 55;
      break;

    case ARRAY_TYPE:
      dtype = 14;
      break;

    default:
      break;
    }

  /* Get the CLASS value.  */
  switch (mech)
    {
    case By_Descriptor_A:
      klass = 4;
      break;
    case By_Descriptor_NCA:
      klass = 10;
      break;
    case By_Descriptor_SB:
      klass = 15;
      break;
    case By_Descriptor:
    case By_Descriptor_S:
    default:
      klass = 1;
      break;
    }

  /* Make the type for a 64bit descriptor for VMS.  The first six fields
     are the same for all types.  */

  field_list64 = chainon (field_list64,
                        make_descriptor_field ("MBO",
                                               gnat_type_for_size (16, 1),
                                               record64_type, size_int (1)));

  field_list64 = chainon (field_list64,
                        make_descriptor_field ("DTYPE",
                                               gnat_type_for_size (8, 1),
                                               record64_type, size_int (dtype)));
  field_list64 = chainon (field_list64,
                        make_descriptor_field ("CLASS",
                                               gnat_type_for_size (8, 1),
                                               record64_type, size_int (klass)));

  field_list64 = chainon (field_list64,
                        make_descriptor_field ("MBMO",
                                               gnat_type_for_size (32, 1),
                                               record64_type, ssize_int (-1)));

  field_list64
    = chainon (field_list64,
               make_descriptor_field
               ("LENGTH", gnat_type_for_size (64, 1), record64_type,
                size_in_bytes (mech == By_Descriptor_A ? inner_type : type)));

  pointer64_type = build_pointer_type_for_mode (type, DImode, false);

  field_list64
    = chainon (field_list64,
               make_descriptor_field
               ("POINTER", pointer64_type, record64_type,
                build_unary_op (ADDR_EXPR,
                                pointer64_type,
                                build0 (PLACEHOLDER_EXPR, type))));

  switch (mech)
    {
    case By_Descriptor:
    case By_Descriptor_S:
      break;

    case By_Descriptor_SB:
      field_list64
        = chainon (field_list64,
                   make_descriptor_field
                   ("SB_L1", gnat_type_for_size (64, 1), record64_type,
                    TREE_CODE (type) == ARRAY_TYPE
                    ? TYPE_MIN_VALUE (TYPE_DOMAIN (type)) : size_zero_node));
      field_list64
        = chainon (field_list64,
                   make_descriptor_field
                   ("SB_U1", gnat_type_for_size (64, 1), record64_type,
                    TREE_CODE (type) == ARRAY_TYPE
                    ? TYPE_MAX_VALUE (TYPE_DOMAIN (type)) : size_zero_node));
      break;

    case By_Descriptor_A:
    case By_Descriptor_NCA:
      field_list64 = chainon (field_list64,
                            make_descriptor_field ("SCALE",
                                                   gnat_type_for_size (8, 1),
                                                   record64_type,
                                                   size_zero_node));

      field_list64 = chainon (field_list64,
                            make_descriptor_field ("DIGITS",
                                                   gnat_type_for_size (8, 1),
                                                   record64_type,
                                                   size_zero_node));

      field_list64
        = chainon (field_list64,
                   make_descriptor_field
                   ("AFLAGS", gnat_type_for_size (8, 1), record64_type,
                    size_int (mech == By_Descriptor_NCA
                              ? 0
                              /* Set FL_COLUMN, FL_COEFF, and FL_BOUNDS.  */
                              : (TREE_CODE (type) == ARRAY_TYPE
                                 && TYPE_CONVENTION_FORTRAN_P (type)
                                 ? 224 : 192))));

      field_list64 = chainon (field_list64,
                            make_descriptor_field ("DIMCT",
                                                   gnat_type_for_size (8, 1),
                                                   record64_type,
                                                   size_int (ndim)));

      field_list64 = chainon (field_list64,
                            make_descriptor_field ("MBZ",
                                                   gnat_type_for_size (32, 1),
                                                   record64_type,
                                                   size_int (0)));
      field_list64 = chainon (field_list64,
                            make_descriptor_field ("ARSIZE",
                                                   gnat_type_for_size (64, 1),
                                                   record64_type,
                                                   size_in_bytes (type)));

      /* Now build a pointer to the 0,0,0... element.  */
      tem = build0 (PLACEHOLDER_EXPR, type);
      for (i = 0, inner_type = type; i < ndim;
           i++, inner_type = TREE_TYPE (inner_type))
        tem = build4 (ARRAY_REF, TREE_TYPE (inner_type), tem,
                      convert (TYPE_DOMAIN (inner_type), size_zero_node),
                      NULL_TREE, NULL_TREE);

      field_list64
        = chainon (field_list64,
                   make_descriptor_field
                   ("A0",
                    build_pointer_type_for_mode (inner_type, DImode, false),
                    record64_type,
                    build1 (ADDR_EXPR,
                            build_pointer_type_for_mode (inner_type, DImode,
                                                         false),
                            tem)));

      /* Next come the addressing coefficients.  */
      tem = size_one_node;
      for (i = 0; i < ndim; i++)
        {
          char fname[3];
          tree idx_length
            = size_binop (MULT_EXPR, tem,
                          size_binop (PLUS_EXPR,
                                      size_binop (MINUS_EXPR,
                                                  TYPE_MAX_VALUE (idx_arr[i]),
                                                  TYPE_MIN_VALUE (idx_arr[i])),
                                      size_int (1)));

          fname[0] = (mech == By_Descriptor_NCA ? 'S' : 'M');
          fname[1] = '0' + i, fname[2] = 0;
          field_list64
            = chainon (field_list64,
                       make_descriptor_field (fname,
                                              gnat_type_for_size (64, 1),
                                              record64_type, idx_length));

          if (mech == By_Descriptor_NCA)
            tem = idx_length;
        }

      /* Finally here are the bounds.  */
      for (i = 0; i < ndim; i++)
        {
          char fname[3];

          fname[0] = 'L', fname[1] = '0' + i, fname[2] = 0;
          field_list64
            = chainon (field_list64,
                       make_descriptor_field
                       (fname, gnat_type_for_size (64, 1), record64_type,
                        TYPE_MIN_VALUE (idx_arr[i])));

          fname[0] = 'U';
          field_list64
            = chainon (field_list64,
                       make_descriptor_field
                       (fname, gnat_type_for_size (64, 1), record64_type,
                        TYPE_MAX_VALUE (idx_arr[i])));
        }
      break;

    default:
      post_error ("unsupported descriptor type for &", gnat_entity);
    }

  TYPE_NAME (record64_type) = create_concat_name (gnat_entity, "DESC64");
  finish_record_type (record64_type, field_list64, 0, false);
  return record64_type;
}

/* Utility routine for above code to make a field.  */

static tree
make_descriptor_field (const char *name, tree type,
                       tree rec_type, tree initial)
{
  tree field
    = create_field_decl (get_identifier (name), type, rec_type, 0, 0, 0, 0);

  DECL_INITIAL (field) = initial;
  return field;
}

/* Convert GNU_EXPR, a pointer to a 64bit VMS descriptor, to GNU_TYPE, a
   regular pointer or fat pointer type.  GNAT_SUBPROG is the subprogram to
   which the VMS descriptor is passed.  */

static tree
convert_vms_descriptor64 (tree gnu_type, tree gnu_expr, Entity_Id gnat_subprog)
{
  tree desc_type = TREE_TYPE (TREE_TYPE (gnu_expr));
  tree desc = build1 (INDIRECT_REF, desc_type, gnu_expr);
  /* The CLASS field is the 3rd field in the descriptor.  */
  tree klass = TREE_CHAIN (TREE_CHAIN (TYPE_FIELDS (desc_type)));
  /* The POINTER field is the 6th field in the descriptor.  */
  tree pointer64 = TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (klass)));

  /* Retrieve the value of the POINTER field.  */
  tree gnu_expr64
    = build3 (COMPONENT_REF, TREE_TYPE (pointer64), desc, pointer64, NULL_TREE);

  if (POINTER_TYPE_P (gnu_type))
    return convert (gnu_type, gnu_expr64);

  else if (TYPE_IS_FAT_POINTER_P (gnu_type))
    {
      tree p_array_type = TREE_TYPE (TYPE_FIELDS (gnu_type));
      tree p_bounds_type = TREE_TYPE (TREE_CHAIN (TYPE_FIELDS (gnu_type)));
      tree template_type = TREE_TYPE (p_bounds_type);
      tree min_field = TYPE_FIELDS (template_type);
      tree max_field = TREE_CHAIN (TYPE_FIELDS (template_type));
      tree template_tree, template_addr, aflags, dimct, t, u;
      /* See the head comment of build_vms_descriptor.  */
      int iklass = TREE_INT_CST_LOW (DECL_INITIAL (klass));
      tree lfield, ufield;

      /* Convert POINTER to the type of the P_ARRAY field.  */
      gnu_expr64 = convert (p_array_type, gnu_expr64);

      switch (iklass)
        {
        case 1:  /* Class S  */
        case 15: /* Class SB */
          /* Build {1, LENGTH} template; LENGTH64 is the 5th field.  */
          t = TREE_CHAIN (TREE_CHAIN (klass));
          t = build3 (COMPONENT_REF, TREE_TYPE (t), desc, t, NULL_TREE);
          t = tree_cons (min_field,
                         convert (TREE_TYPE (min_field), integer_one_node),
                         tree_cons (max_field,
                                    convert (TREE_TYPE (max_field), t),
                                    NULL_TREE));
          template_tree = gnat_build_constructor (template_type, t);
          template_addr = build_unary_op (ADDR_EXPR, NULL_TREE, template_tree);

          /* For class S, we are done.  */
          if (iklass == 1)
            break;

          /* Test that we really have a SB descriptor, like DEC Ada.  */
          t = build3 (COMPONENT_REF, TREE_TYPE (klass), desc, klass, NULL);
          u = convert (TREE_TYPE (klass), DECL_INITIAL (klass));
          u = build_binary_op (EQ_EXPR, integer_type_node, t, u);
          /* If so, there is already a template in the descriptor and
             it is located right after the POINTER field.  The fields are
             64bits so they must be repacked. */
          t = TREE_CHAIN (pointer64);
          lfield = build3 (COMPONENT_REF, TREE_TYPE (t), desc, t, NULL_TREE);
          lfield = convert (TREE_TYPE (TYPE_FIELDS (template_type)), lfield);

          t = TREE_CHAIN (t);
          ufield = build3 (COMPONENT_REF, TREE_TYPE (t), desc, t, NULL_TREE);
          ufield = convert
           (TREE_TYPE (TREE_CHAIN (TYPE_FIELDS (template_type))), ufield);

          /* Build the template in the form of a constructor. */
          t = tree_cons (TYPE_FIELDS (template_type), lfield,
                         tree_cons (TREE_CHAIN (TYPE_FIELDS (template_type)),
                                    ufield, NULL_TREE));
          template_tree = gnat_build_constructor (template_type, t);

          /* Otherwise use the {1, LENGTH} template we build above.  */
          template_addr = build3 (COND_EXPR, p_bounds_type, u,
                                  build_unary_op (ADDR_EXPR, p_bounds_type,
                                                 template_tree),
                                  template_addr);
          break;

        case 4:  /* Class A */
          /* The AFLAGS field is the 3rd field after the pointer in the
             descriptor.  */
          t = TREE_CHAIN (TREE_CHAIN (TREE_CHAIN (pointer64)));
          aflags = build3 (COMPONENT_REF, TREE_TYPE (t), desc, t, NULL_TREE);
          /* The DIMCT field is the next field in the descriptor after
             aflags.  */
          t = TREE_CHAIN (t);
          dimct = build3 (COMPONENT_REF, TREE_TYPE (t), desc, t, NULL_TREE);
          /* Raise CONSTRAINT_ERROR if either more than 1 dimension
             or FL_COEFF or FL_BOUNDS not set.  */
          u = build_int_cst (TREE_TYPE (aflags), 192);
          u = build_binary_op (TRUTH_OR_EXPR, integer_type_node,
                               build_binary_op (NE_EXPR, integer_type_node,
                                                dimct,