* tree-ssa-dom.c (tree_ssa_dominator_optimize): Fix setting of

[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2005-03-02  Jeff Law  <law@redhat.com>

        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Fix setting of
        CFG_ALTERED in the main DOM iteration loop.

2005-03-02  Mark Mitchell  <mark@codesourcery.com>

        PR c++/19916
        * varasm.c (initializer_constant_valid_p): Allow conversions
        between OFFSET_TYPEs.  Tidy.

2005-03-02  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.md ("return"): Remove epilogue delay list
        sanity check.

2005-03-02  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/arm/linux-elf.h (ARM_FUNCTION_PROFILER): Do not use (PLT)
        for Thumb.
        * config/arm/netbsd-elf.h (ARM_FUNCTION_PROFILER): Likewise.

2005-03-02  Kazu Hirata  <kazu@cs.umass.edu>

        * cfgloop.h, cfgloopanal.c, cfgloopmanip.c, conflict.c,
        loop-init.c, loop-unroll.c, print-tree.c, reg-notes.def,
        config/m68k/m68k.c, config/mips/mips.h,
        config/rs6000/rs6000-protos.h, doc/contrib.texi,
        doc/include/gcc-common.texi: Update copyright.

        PR middle-end/18029 and PR middle-end/18030
        * expr.c (optimize_bitfield_assignment_op): Add a special case
        to handle BIT_IOR_EXPR and BIT_XOR_EXPR.

        * fold-const.c (fold_unary): New.
        (fold): Call fold_unary on unary expressions.

2005-03-02  Richard Guenther  <rguenth@gcc.gnu.org>

        * cgraph.h (struct cgraph_edge): Add prev_caller and
        prev_callee fields.
        (cgraph_node_remove_callees): Export.
        * cgraph.c (cgraph_create_edge): Initialize prev_caller
        and prev_callee.
        (cgraph_edge_remove_callee): New function.
        (cgraph_edge_remove_caller): Likewise.
        (cgraph_remove_edge): Use.
        (cgraph_redirect_edge_callee): Likewise.
        (cgraph_node_remove_callees): New function.
        (cgraph_node_remove_callers): Likewise.
        (cgraph_remove_node): Use.
        * tree-optimize.c (tree_rest_of_compilation): Use
        cgraph_node_remove_callees instead of manual loop.
        * cgraphunit.c (cgraph_finalize_function): Likewise.
        (cgraph_expand_function): Likewise.
        (cgraph_remove_unreachable_nodes): Likewise.

2005-03-02  Joseph S. Myers  <joseph@codesourcery.com>

        PR c/8927
        * c-tree.h (undeclared_variable, build_external_ref): Add extra
        argument.
        * c-decl.c (undeclared_variable): Take location as argument.
        * c-typeck.c (build_external_ref): Likewise.
        * c-parser.c (c_parser_postfix_expression): Pass location of
        identifier to build_external_ref.

2005-03-01  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/rs6000.md (cceq splitter): Use operand mode, not
        CCEQ mode for branch_positive_comparison_operator test.
        * config/rs6000/predicates (branch_comparison_operator): Revert to
        define_predicate.
        (scc_comparison_operator): Same.
        (branch_positive_comparison_operator): Same.

2005-03-01  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.c (cris_eligible_for_epilogue_delay)
        (cris_delay_slots_for_epilogue): Remove.
        (save_last): Move into cris_target_asm_function_epilogue.
        (cris_target_asm_function_epilogue): Remove tests for file being
        NULL.
        * config/cris/cris-protos.h (cris_eligible_for_epilogue_delay)
        (cris_delay_slots_for_epilogue): Remove prototypes.
        * config/cris/cris.h (DELAY_SLOTS_FOR_EPILOGUE)
        (ELIGIBLE_FOR_EPILOGUE_DELAY): Do not define.

2005-03-01  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/predicates.md (branch_comparison_operator): Change
        to define_special_predicate.
        (scc_comparison_operator): Same.
        (branch_positive_comparison_operator): Same.

2005-03-01  Daniel Berlin <dberlin@dberlin.org>

        * Makefile.in (tree-ssa-sink.o): New.
        (OBJS-common): Add tree-ssa-sink.o.
        * common.opt: Add -ftree-sink
        * opts.c (decode_options): flag_tree_sink is set at O1 or higher.
        * timevar.def (TV_TREE_SINK): new timevar.
        * tree-flow.h (is_hidden_global_store): Prototype.
        * tree-optimize.c (init_tree_optimization_passes): Add
        pass_sink_code.
        * tree-pass.h (pass_sink_code): New.
        * tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Move checking
        for non-obvious global store store to is_hidden_global_store, and
        call that new function.
        * tree-ssa-sink.c: New file.
        * doc/invoke.texi: Document -fdump-tree-sink and -ftree-sink.
        * doc/passes.texi: Document forward store motion.
        * testsuite/gcc.dg/tree-ssa/ssa-sink-1.c: New test
        * testsuite/gcc.dg/tree-ssa/ssa-sink-2.c: New test
        * testsuite/gcc.dg/tree-ssa/ssa-sink-3.c: New test
        * testsuite/gcc.dg/tree-ssa/ssa-sink-4.c: New test

2005-03-01  Per Bothner  <per@bothner.com>

        * diagnostic.c (diagnostic_build_prefix): If USE_MAPPED_LOCATION
        and we have a non-zero column-number, add it to the message.
        Also factor out the diagnostic_kind_text.

2005-03-01  Zdenek Dvorak  <dvorakz@suse.cz>

        * cfgloop.c (flow_loop_entry_edges_find, flow_loop_exit_edges_find,
        flow_loop_pre_header_scan, flow_loop_pre_header_find,
        flow_loop_scan): Removed.
        (flow_loop_dump): Do not dump removed fields.
        (flow_loop_free): Do not free removed fields.
        (flow_loops_find): Flags argument removed.  Do not call flow_loop_scan.
        (loop_exit_edge_p): New function.
        * cfgloop.h (struct loop): Removed fields pre_header, pre_header_edges,
        num_pre_header_edges, entry_edges, num_entries, exit_edges,
        num_exits, exits_doms.
        (LOOP_TREE, LOOP_PRE_HEADER, LOOP_ENTRY_EDGES, LOOP_EXIT_EDGES,
        LOOP_EDGES, LOOP_ALL): Removed.
        (flow_loop_scan): Declaration removed.
        (loop_exit_edge_p, mark_loop_exit_edges): Declare.
        * cfgloopmanip.c (create_loop_notes): Do not pass flags to
        flow_loops_find.
        * ifcvt.c (mark_loop_exit_edges): Moved to cfgloopanal.c.
        (if_convert): Call flow_loops_find and flow_loops_free
        when calling mark_loop_exit_edges.
        * cfgloopanal.c (mark_loop_exit_edges): Moved from
        ifcvt.c.  Removed the flow_loops_find, flow_loops_free and
        free_dominance_info calls.
        * loop-init.c (flow_loops_find): Ditto.
        * passes.c (rest_of_handle_branch_prob): Ditto.
        * lambda-code.c (perfect_nestify): Do not call flow_loops_find.
        * loop-unroll.c (analyze_insns_in_loop): Do not use
        EDGE_LOOP_EXIT.
        * predict.c (predict_loops): Do not call flow_loop_scan.
        Use get_loop_exit_edges.
        (tree_estimate_probability): Do not pass flags to flow_loops_find.
        * tree-if-conv.c (bb_with_exit_edge_p): Take loop as argument.
        Do not use EDGE_LOOP_EXIT.
        (tree_if_convert_cond_expr, if_convertible_modify_expr_p): Pass loop
        to bb_with_exit_edge_p.
        (if_convertible_loop_p): Do not call flow_loop_scan.  Use
        loop->single_exit.  Do not use EDGE_LOOP_EXIT.  Pass loop
        to bb_with_exit_edge_p.
        (combine_blocks): Pass loop to bb_with_exit_edge_p.  Do not use
        EDGE_LOOP_EXIT.
        * tree-loop-linear.c (linear_transform_loops): Do not call
        flow_loop_scan.  Use loop->single_exit.
        * tree-vect-analyze.c (vect_analyze_operations): Use loop->single_exit.
        (vect_analyze_loop_form): Do not call flow_loop_scan.
        * tree-vect-transform.c (vect_update_ivs_after_vectorizer): Use
        loop->single_exit.
        (vect_do_peeling_for_loop_bound): Use loop_preheader_edge and
        loop->single_exit.
        * tree-vectorizer.c (slpeel_update_phis_for_duplicate_loop,
        slpeel_make_loop_iterate_ntimes, slpeel_can_duplicate_loop_p,
        slpeel_tree_duplicate_loop_to_edge_cfg,
        slpeel_verify_cfg_after_peeling, slpeel_tree_peel_loop_to_edge):
        Use loop_preheader_edge and loop->single_exit.  Do not call
        flow_loop_scan.

2005-03-01  Nick Clifton  <nickc@redhat.com>

        * config/arm/arm.c (thumb_find_work_register): Check all of the
        argument registers to see if they are free, and a couple of
        special cases where the last argument register but can be proved
        to be available during the function's prologue.
        (print_multi_reg, arm_compute_save_reg0_reg12_mask,
        output_return_instruction, emit_multi_reg_push, thumb_pushpop,
        thumb_unexpanded_epilogue): Use unsigned long as the type for the
        register bit-mask.
        (thumb_compute_save_reg_mask): Likewise.  Also use
        thumb_find_work_register() to ensure that there is agreement about
        which work register is going to be used in the prologue.
        (thumb_output_function_prologue): Use unsigned long as the type
        for the register bit-mask.  Also delay pushing the link register if
        other high registers are going to be pushed.
        (thumb_compute_save_reg_mask, emit_multi_reg_push,
        print_multi-reg, number_of_first_bit_set, thumb_pushpop): Remove
        redundant prototypes.

2005-02-28  John David Anglin  <dave.anglin#nrc-cnrc.gc.ca>

        PR target/19819
        * pa.h (GO_IF_LEGITIMATE_ADDRESS): Allow allow hard registers during
        and after reload in REG+REG indexed addresses without REG_POINTER
        set in the base and not set in the index.

2005-02-28  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/linux.h (MD_EXEC_PREFIX, MD_STARTFILE_PREFIX):
        Don't undefine here.
        (HANDLE_PRAGMA_PACK_PUSH_POP): Delete.
        (NO_IMPLICIT_EXTERN_C, CPLUSPLUS_CPP_SPEC): Likewise.
        (TARGET_OS_CPP_BUILTINS): Use LINUX_TARGET_OS_CPP_BUILTINS.
        (LIB_SPEC, LINK_EH_SPEC, STARTFILE_SPEC, ENDFILE_SPEC,
        LINK_GCC_C_SEQUENCE_SPEC, USE_LD_AS_NEEDED, TARGET_C99_FUNCTIONS):
        Delete.
        * config.gcc (sh*-*-linux*): Use config/linux.h.

2005-02-28  Dale Johannesen  <dalej@apple.com>
            Stan Shebs  <shebs@apple.com>

        Rewrite of 64-bit Darwin structure-by-value pass/return.
        * config/rs6000/rs6000.h (CUMULATIVE_ARGS): New fields
        intoffset, use_stack, named.
        * config/rs6000/rs6000.c (rs6000_darwin64_function_arg):  Remove.
        (rs6000_darwin64_record_arg_advance_flush):  New.
        (rs6000_darwin64_record_arg_advance_recurse): New.
        (rs6000_darwin64_record_arg_flush):  New.
        (rs6000_darwin64_record_arg_recurse):  New.
        (rs6000_darwin64_record_arg):  New.
        (rs6000_return_in_memory):  Remove AGGREGATE_TYPE_P check.
        (function_arg_boundary):  Handle 128-bit aligned structs.
        (function_arg_advance):  Rewrite darwin64 struct handling.
        (function_arg):  Call rs6000_darwin64_record_arg.
        (function_arg_partial_nregs):  Handle darwin64 structs.
        (rs6000_darwin64_function_value):  Remove.
        (rs6000_function_value):  Call rs6000_darwin64_record_arg.

2005-02-28  Roger Sayle  <roger@eyesopen.com>

        PR tree-optimization/20216
        * tree-chrec.c (tree_fold_factorial): Delete.
        (tree_fold_binomial): Change argument list to take a return type
        and change the type of K to unsigned int.  Rewrite to avoid explicit
        evaluation of factorials, and (recursively) calling fold to perform
        compile-time arithmetic.  Return NULL on (internal) overflow.
        (chrec_evaluate): Change type of K to an unsigned int.  Avoid
        calling tree_fold_binomial unnecessarily.  Return chrec_dont_know
        if any intermediate calculation overflows.
        (chrec_apply): Update call to chrec_evaluate.

2005-02-28  James E Wilson  <wilson@specifixinc.com>

        * config/mips/mips.h (NO_PROFILE_COUNTERS): Define.

2005-02-28  Joseph S. Myers  <joseph@codesourcery.com>

        PR c/20245
        * c-parser.c (c_parser_compound_statement): Return error_mark_node
        instead of NULL_TREE on error.

2005-02-28  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/rs6000.c (EASY_VECTOR_15): Remove.
        (EASY_VECTOR_15_ADD_SELF): Remove.
        (num_insns_constant_wide): Not static.
        (validate_condition_mode): Not static.
        (toc_relative_expr_p): Not static.
        (legitimate_indirect_address_p): Not static.
        (macho_lo_sum_memory_operand): Not static.
        (invalid_e500_subreg): Not static.
        (easy_vector_same): Not static.
        (easy_vector_splat_const): Not static.
        (RS6000_SYMBOL_REF_TLS_P): Remove.
        (any_operand): Delete.
        (any_parallel_operand): Delete.
        (count_register_operand): Delete.
        (altivec_register_operand): Delete.
        (xer_operand): Delete.
        (s8bit_cint_operand): Delete.
        (short_cint_operand): Delete.
        (u_short_cint_operand): Delete.
        (non_short_cint_operand): Delete.
        (exact_log2_cint_operand): Delete.
        (gpc_reg_operand): Delete.
        (cc_reg_operand): Delete.
        (cc_reg_not_cr0_operand): Delete.
        (reg_or_short_operand): Delete.
        (reg_or_neg_short_operand): Delete.
        (reg_or_aligned_short_operand): Delete.
        (reg_or_u_short_operand): Delete.
        (reg_or_cint_operand): Delete.
        (reg_or_arith_cint_operand): Delete.
        (reg_or_add_cint64_operand): Delete.
        (reg_or_sub_cint64_operand): Delete.
        (reg_or_logical_cint_operand): Delete.
        (got_operand): Delete.
        (got_no_const_operand): Delete.
        (easy_fp_constant): Delete.
        (easy_vector_constant): Delete.
        (easy_vector_constant_add_self): Delete.
        (zero_constant): Delete.
        (zero_fp_constant): Delete.
        (volatile_mem_operand): Delete.
        (offsettable_mem_operand): Delete.
        (mem_or_easy_const_operand): Delete.
        (add_operand): Delete.
        (non_add_cint_operand): Delete.
        (logical_operand): Delete.
        (non_logical_cint_operand): Delete.
        (mask_operand): Delete.
        (mask_operand_wrap): Delete.
        (mask64_operand): Delete.
        (mask64_2_operand): Delete.
        (and64_operand): Delete.
        (and64_2_operand): Delete.
        (and_operand): Delete.
        (reg_or_mem_operand): Delete.
        (lwa_operand): Delete.
        (symbol_ref_operand): Delete.
        (call_operand): Delete.
        (current_file_function_operand): Delete.
        (input_operand): Delete.
        (rs6000_nonimmediate_operand): Delete.
        (rs6000_tls_symbol_ref): Delete.
        (save_world_operation): Delete.
        (restore_world_operation): Delete.
        (load_multiple_operation): Delete.
        (store_multiple_operation): Delete.
        (vrsave_operation): Delete.
        (mfcr_operation): Delete.
        (mtcrf_operation): Delete.
        (lmw_operation): Delete.
        (stmw_operation): Delete.
        (branch_comparison_operator): Delete.
        (branch_positive_comparison_operator): Delete.
        (scc_comparison_operator): Delete.
        (trap_comparison_operator): Delete.
        (boolean_operator): Delete.
        (boolean_or_operator): Delete.
        (min_max_operator): Delete.
        * config/rs6000/rs6000.h (RS6000_SYMBOL_REF_TLS_P): Move to here.
        (EASY_VECTOR_15): Moved to here.
        (EASY_VECTOR_15_ADD_SELF): Move to here.
        (PREDICATE_CODES): Delete.
        * config/rs6000/rs6000-protos.h: Delete predicate functions.
        Declare functions no longer static.
        * config/rs6000/predicates.md: New.
        * config/rs6000/rs6000.md: Include predicates.md

2005-02-28  Kazu Hirata  <kazu@cs.umass.edu>

        * calls.c (emit_call_1): Don't use  REG_ALWAYS_RETURN.
        (emit_library_call_value_1): Don't use LCT_ALWAYS_RETURN and
        REG_ALWAYS_RETURN.
        * cfgrtl.c (need_fake_edge_p): Likewise.
        * combine.c (distribute_notes): Likewise.
        * emit-rtl.c (try_split): Likewise.
        * recog.c (peephole2_opimize): Likewise.
        * reg-notes.def (ALWAYS_RETURN): Remove.
        * rtl.h (LCT_ALWAYS_RETURN): Remove.
        * tree-cfg.c (need_fake_edge_p): Don't use ECF_ALWAYS_RETURN.
        * tree.h (ECF_ALWAYS_RETURN): Remove.

2005-02-28  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/19874
        * tree-ssa.c (tree_ssa_useless_type_conversion_1): A conversion
        between different machine modes is never a "useless" conversion.

2005-02-28  Geert Bosch  <bosch@gnat.com>

        PR ada/15977
        * doc/contrib.texi: List contributors for Ada front end

2005-02-28 Paolo Bonzini <bonzini@gnu.org>

        * simplify-rtx.c (simplify_unary_operation_1,
        simplify_const_unary_operation): New, extracted from...
        (simplify_unary_operation): ... this one.
        (simplify_binary_operation_1,
        simplify_const_binary_operation): New, extracted from...
        (simplify_binary_operation): ... this one.
        * rtl.h (simplify_const_unary_operation,
        simplify_const_binary_operation): Add prototypes.

2005-02-28  Julian Brown  <julian@codesourcery.com>

        * config/elfos.h: Revert my patch from 2005-02-25 since it broke
        building libjava and caused PR regression/20228.

2005-02-28  Paolo Bonzini  <bonzini@gnu.org>

        PR bootstrap/17383
        * Makefile.in (host_subdir): New.
        (build_objdir): New.  Replace ../$(build_subdir) with it throughout.
        * configure: Regenerate.

2005-02-27  Zack Weinberg  <zack@codesourcery.com>

        * config/alpha/t-osf4, config/arm/t-netbsd, config/ia64/t-hpux
        * config/pa/t-hpux-shlib (SHLIB_INSTALL): Create the
        installation directory first.

2005-02-28  Hans-Peter Nilsson  <hp@axis.com>

        PR target/19065.
        * config/cris/cris.h (EXTRA_CONSTRAINT_Q): Accept only (mem (reg)),
        not including (reg). Do not check for reg being CRIS_PC_REGNUM.
        (EXTRA_MEMORY_CONSTRAINT): Define as 'Q'.
        * config/cris/cris.md: Tweak comments referring to Q.
        ("cmpsi", "cmphi", "cmpqi", "*movsi_internal", "movhi")
        ("movstricthi", "movqi", "movstrictqi", "movsf", "addsi3")
        ("addhi3", "addqi3", "subsi3", "subhi3", "subqi3")
        ("*expanded_andsi", "*expanded_andhi", "*andhi_lowpart", "andqi3")
        ("*andqi_lowpart", "iorsi3", "iorhi3", "iorqi3", "uminsi3"):
        Insert spaces in constraints to align alternatives vertically for
        readability.
        ("cmphi"): Ditto.  Add separate alternative for operand 0 "r",
        operand 1: "M".

2005-02-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR rtl-optimization/17728
        * pa.md (mulsi3, divsi3, udivsi3, modsi3): Change predicate for
        operand 0 from general_operand to move_dest_operand.

2005-02-26  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa/elf.h, pa/som.h (ASM_OUTPUT_EXTERNAL): Use assemble_name_raw
        instead of trying to save and restore TREE_SYMBOL_REFERENCED.
        * pa/pa64-hpux.h (ASM_OUTPUT_TYPE_DIRECTIVE): Define.
        (ASM_OUTPUT_EXTERNAL): Don't save and restore TREE_SYMBOL_REFERENCED.

2005-02-26  Nathanael Nerode  <neroden@gcc.gnu.org>

        * configure.ac: Rename cc_for_cross_gnattools to host_cc_for_libada.
        * configure: Regenerate.
        * libada-mk.in: Remove CC; rename
        cc_for_cross_gnattools / cc_set_by_configure to host_cc_for_libada.

2005-02-26  Andrew Pinski  <pinskia@physics.uc.edu>

        PR tree-opt/20188
        * tree-ssa-alias.c (count_uses_and_derefs): If we have TREE_LIST
        for the lhs, also walk over the tree.  Likewise for rhs.

2005-02-26  Zdenek Dvorak  <dvorakz@suse.cz>

        * tree-ssa-dom.c (simple_iv_increment_p): New function.
        (simplify_rhs_and_lookup_avail_expr, eliminate_redundant_computations):
        Do not propagate value of iv before increment over the increment.

2005-02-25  Joseph S. Myers  <joseph@codesourcery.com>

        * c-parser.c: New file.
        * c-parse.in: Remove.
        * Makefile.in (c-parse.o-warn, c-parse.o, c-parse.c, c-parse.y):
        Remove.
        (c-parser.o): Add dependencies.
        (C_AND_OBJC_OBJC, C_OBJS, gcc.srcextra, GTFILES, distclean,
        maintainer-clean, TAGS): Update.
        * c-config-lang.in (gtfiles): Update.
        * gengtype-lex.l: Don't handle "@@".
        * stub-objc.c (objc_get_class_ivars, objc_build_throw_stmt,
        objc_build_synchronized, objc_begin_try_stmt,
        objc_begin_catch_clause, objc_finish_catch_clause,
        objc_build_finally_clause, objc_finish_try_stmt): New.
        * c-tree.h (struct c_declspecs): Add declspecs_seen_p and
        type_seen_p.
        (c_parse_init): Update comment.
        * c-decl.c (c_init_decl_processing): Update comment.
        (build_null_declspecs, declspecs_add_qual, declspecs_add_type,
        declspecs_add_scspec, declspecs_add_attrs): Initialize and update
        new c_declspecs members.

2005-02-25  Julian Brown  <julian@codesourcery.com>

        * config/elfos.h (MAKE_DECL_ONE_ONLY): Redefined to stop DECL_WEAK
        from being used for symbols with vague linkage when
        HAVE_GAS_COMDAT_GROUP is true.

2005-02-25  Mark Mitchell  <mark@codesourcery.com>

        * doc/include/gcc-common.texi (version-GCC): Update to 4.1.

2005-02-25  Steve Ellcey  <sje@cup.hp.com>

        PR target/19930
        * doc/tm.texi (LIBGCC2_LONG_DOUBLE_TYPE_SIZE): Document.
        (LIBGCC2_HAS_DF_MODE): New.
        (LIBGCC2_HAS_XF_MODE): New.
        (LIBGCC2_HAS_TF_MODE): New.
        * libgcc2.h (LIBGCC2_HAS_XF_MODE): New name for HAVE_XFMODE.
        (LIBGCC2_HAS_TF_MODE): New name for HAVE_TFMODE.
        * libgcc2.c (LIBGCC2_HAS_XF_MODE): New name for HAVE_XFMODE.
        (LIBGCC2_HAS_TF_MODE): New name for HAVE_TFMODE.
        (LIBGCC2_HAS_DF_MODE): New name for HAVE_DFMODE.
        * config/ia64/t-ia64 (LIB1ASMFUNCS): Remove __compat
        and add _fixtfdi, _fixunstfdi, _floatditf
        * lib1funcs.asm: Remove L__compat. Add L_fixtfdi,
        L_fixunstfdi, L_floatditf.
        * config/ia64/hpux.h (LIBGCC2_HAS_XF_MODE): Define.
        (LIBGCC2_HAS_TF_MODE): Define.

2005-02-25  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/20204
        * tree-into-ssa.c (insert_phi_nodes_for): Do not use
        REWRITE_THIS_STMT markers on PHI nodes.
        (rewrite_initialize_block): Likewise.

2005-02-25  Mark Mitchell  <mark@codesourcery.com>

        * version.c (version_string): Update to 4.1.

2005-02-25  Paolo Carlini  <pcarlini@suse.de>

        * doc/extend.texi (5.24 Declaring Attributes of Functions)<noreturn>:
        Clarify that the alternative way doesn't work in GNU C++.

2005-02-25  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/19937
        * tree-ssa-loop-ivopts.c (rewrite_use_compare): Cast the final value
        to the type of the induction variable.

2005-02-25  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR rtl-optimization/20117
        * bb-reorder.c (duplicate_computed_gotos): Don't duplicate
        the block including noncopyable insn.

2005-02-24  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (delete_trivially_dead_insns): Speed up by minimizing
        calls to find_reg_note.

2005-02-24  Richard Henderson  <rth@redhat.com>

        PR tree-opt/20127
        * tree-sra.c (instantiate_element): Copy TREE_THIS_VOLATILE from
        the type.

2005-02-24  Fariborz Jahanian <fjahanian@apple.com>

        * config/rs6000/rs6000.c (rs6000_legitimize_reload_address): Check for
        vector types if to use base reg for misaligned non-word ld/std.

2005-02-24  Hans-Peter Nilsson  <hp@axis.com>

        PR target/14619
        * config/cris/cris.c (cris_target_asm_function_prologue): Create
        dwarf2 label manually and put it after, not before the prologue.

2005-02-24  David Edelsohn  <edelsohn@gnu.org>

        PR target/19019
        * reload.c (operands_match_p): Only increment register number for
        SCALAR_INT_MODE_P modes in multiple hard registers.

        * config/rs6000/rs6000.md (trunctfdf2): Remove register constraints.
        Fix formatting.

2005-02-24  Volker Reichelt  <reichelt@igpm.rwth-aachen.de>

        * ChangeLog.5: Fix log message typo(s).
        * ChangeLog.7: Likewise.
        * ChangeLog.tree-ssa: Likewise.
        * cfgexpand.c: Fix comment typo(s).
        * conflict.c: Likewise.
        * defaults.h: Likewise.
        * dwarf2out.c: Likewise.
        * gcse.c: Likewise.
        * ggc-page.c: Likewise.
        * tree-eh.c: Likewise.
        * tree-ssa-dom.c: Likewise.

2005-02-24  Jakub Jelinek  <jakub@redhat.com>

        PR target/19019
        * mklibgcc.in: Pass -DSHARED when compiling all *_s${objext} objects.
        * config/rs6000/darwin-ldouble.c: Only use the .symver directives
        if SHARED is defined.

        PR target/20196
        * config/rs6000/rs6000.md (LTU, GTU sCC splitters): Add earlyclobber,
        allow splitting only if operands 0 and 3 don't overlap.

2005-02-24  Richard Henderson  <rth@redhat.com>

        PR middle-end/19953
        * builtins.c (fold_builtin_complex_mul, fold_builtin_complex_div): New.
        (fold_builtin_1): Call them.
        * fold-const.c (fold_complex_mult_parts): Split out from ...
        (fold_complex_mult): ... here.  Fix typo in both imaginary case.
        (fold_complex_div_parts, fold_complex_div): New.
        (fold): Use them.
        * tree.h (fold_complex_mult_parts, fold_complex_div_parts): Declare.

2005-02-24  Richard Kenner  <kenner@vlsi1.ultra.nyu.edu>

        * tree-ssa-ccp.c (visit_assignment): Verify that result of
        VIEW_CONVERT_EXPR is_gimple_min_invariant.

        * print-tree.c (print_node_brief): Print LABEL_DECL_UID.
        (print_node): Likewise.
        Print TYPE_SIZES_GIMPLIFIED.

2005-02-24  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.md ("umulhisi3", "umulqihi3", "mulsi3")
        ("mulqihi3", "mulhisi3", "mulsidi3", "umulsidi3"): Mark input
        operands as commutative in constraints.

2005-02-24  Diego Novillo  <dnovillo@redhat.com>

        * tree-into-ssa.c: Re-organize internal functions.

2005-02-24  Richard Henderson  <rth@redhat.com>

        PR middle-end/18902
        * c-opts.c (c_common_post_options): Set flag_complex_method to 2
        for c99.
        * common.opt (fcx-limited-range): New.
        * opts.c (set_fast_math_flags): Set flag_cx_limited_range.
        * toplev.c (flag_complex_method): Initialize to 1.
        (process_options): Set flag_complex_method to 0 if
        flag_cx_limited_range.
        * doc/invoke.texi (-fcx-limited-range): New.

2005-02-24  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (delete_trivially_dead_insns): Speed up by using
        NEXT_INSN and PREV_INSN directly instead of next_real_insn and
        prev_real_insn.

2005-02-24  Andrea Tarani  <andrea.tarani@gilbarco.com>

        * config/m68k/m68k.c (m68k_save_reg): Also save A5 for non-leaf
        functions when -mid-shared-library is being used.

2005-02-23  Daniel Jacobowitz  <dan@codesourcery.com>

        * doc/tm.texi (LINK_LIBGCC_SPECIAL): Remove.
        (LINK_LIBGCC_SPECIAL_1): Don't mention it.
        * gcc.c: Don't check for LINK_LIBGCC_SPECIAL.
        * system.h: Poison LINK_LIBGCC_SPECIAL.

2005-02-23  James E Wilson  <wilson@specifixinc.com>

        * gengtype.c (note_insn_name): Make 1 element larger.

2005-02-23  Roger Sayle  <roger@eyesopen.com>

        PR target/20018
        PR rtl-optimization/20097
        * simplify-rtx.c (simplify_relational_operation_1): Avoid creating
        BImode SUBREGs of SImode registers which confuse the ia64 backend.

2005-02-23  David Edelsohn  <edelsohn@gnu.org>

        * t-aix43 (SHLIB_INSTALL): Create directory for shared library.
        * t-aix52 (SHLIB_INSTALL): Same.

2005-02-23  Kazu Hirata  <kazu@cs.umass.edu>

        * genpreds.c: Update copyright.

2005-02-23  Michael Beach  <michaelb@ieee.org>

        PR target/20159
        * config/sparc/t-elf (startup files): Assemble with CPP.

2005-02-23  Paolo Bonzini  <bonzini@gnu.org>

        * genpreds.c (mark_mode_tests): Handle non-VOIDmode match_operands.
        (write_predicate_expr): Likewise.

2005-02-22  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/20100
        PR tree-optimization/20115
        * tree-optimize.c (init_tree_optimization_passes): Remove
        pass_maybe_create_global_var.
        * tree-pass.h (pass_maybe_create_global_var): Remove.
        * tree-ssa-alias.c (aliases_computed_p): Declare.
        (struct alias_info): Add field NUM_PURE_CONST_CALLS_FOUND.
        (count_calls_and_maybe_create_global_var): Remove.
        (pass_maybe_create_global_var): Remove.
        (init_alias_info): Do not declare aliases_computed_p.
        (maybe_create_global_var): If the function contains no
        call-clobbered variables and a mix of pure/const and regular
        function calls, create .GLOBAL_VAR.
        Mark all call-clobbered variables for renaming.
        (merge_pointed_to_info): Update comment.
        (add_pointed_to_var): Likewise.
        (is_escape_site): Likewise.
        Accept struct alias_info * instead of size_t *.
        Update all users.
        Update AI->NUM_CALLS_FOUND and AI->NUM_PURE_CONST_CALLS_FOUND
        as necessary.
        * tree-ssa-operands.c (get_call_expr_operands): If
        ALIASES_COMPUTED_P is false, do not add call-clobbering
        operands.
        * tree-ssa.c (init_tree_ssa): Set ALIASES_COMPUTED_P to false.
        (delete_tree_ssa): Likewise.

2005-02-22  James E Wilson  <wilson@specifixinc.com>

        * toplev.c (backend_init): Don't call init_adjust_machine_modes here.
        (do_compile): Do call it here.

2005-02-22  Kazu Hirata  <kazu@cs.umass.edu>

        PR rtl-optimization/20017.
        * passes.c (rest_of_handle_combine, rest_of_handle_cse,
        rest_of_handle_cse2, rest_of_handle_gcse): Call
        delete_dead_jumptables immediately before calling cleanup_cfg.

2005-02-22  Devang Patel  <dpatel@apple.com>

        PR 19952
        * tree-if-conv.c (process_phi_nodes): Use bsi_after_labels and skip
        all labels

2005-02-22  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/aix.h (WINT_TYPE): Define.

2005-02-22  Stan Shebs  <shebs@apple.com>

        * config/rs6000/rs6000.c (rs6000_override_options): Default to
        natural alignment for 64-bit Darwin.
        (rs6000_parse_alignment_option): Warn about uses of -malign-power
        on 64-bit Darwin.
        * doc/invoke.texi: Document this.

2005-02-22  DJ Delorie  <dj@redhat.com>

        * c-common.c (c_common_type_for_mode): Pass the mode's precision
        to make_[un]signed_type, not the mode itself.

2005-02-22  Kazu Hirata  <kazu@cs.umass.edu>

        * cfg.c (cached_make_edge): Call make_edge if edge cache is
        not available.  Use tail calls wherever possible.
        (make_edge): Call unchecked_make_edge to create an edge.

        * tree-outof-ssa.c (SSANORM_USE_COALESCE_LIST): Remove.
        (coalesce_ssa_name): Don't check for
        SSANORM_USE_COALESCE_LIST.
        (rewrite_out_of_ssa): Don't use SSANORM_USE_COALESCE_LIST.

2005-02-22  Diego Novillo  <dnovillo@redhat.com>

        * tree-into-ssa.c (rewrite_blocks): Move debug dumps from ...
        (rewrite_into_ssa): ... here.

2005-02-21  Alexandre Oliva  <aoliva@redhat.com>

        PR tree-optimization/19786
        * tree-ssa-alias.c (compute_flow_insensitive_aliasing): Add one
        tag to another's may-alias bitmap when adding to the other's list.

2005-02-21  DJ Delorie  <dj@redhat.com>

        * tree-ssa-loop-ivopts.c (computation_cost): Start register
        numbering at LAST_VIRTUAL_REGISTER+1 to avoid possibly using hard
        registers in unsupported ways.
        * expmed.c (init_expmed): Likewise.

2005-02-21  Stan Cox  <scox@redhat.com>

        * config/iq2000/iq2000.h (DWARF_FRAME_RETURN_COLUMN): Change to 31.

2005-02-21  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-cfg.c (fold_cond_expr_cond): New.
        (make_edges): Call fold_cond_expr_cond.
        (find_taken_edge): Accept nothing but INTEGER_CST.
        (find_taken_edge_cond_expr): Reject INTEGER_CST other than 0
        and 1.
        (find_taken_edge_switch_expr): Remove a check for INTEGER_CST.

        * flow.c (delete_dead_jumptables): Speed up by scanning insns
        that do not belong to any basic block.

2005-02-21  Jeff Law  <law@redhat.com>

        * cfganal.c (find_unreachable_blocks): Manually CSE load of
        e->dest.

2005-02-21  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-outof-ssa.c (SSANORM_REMOVE_ALL_PHIS): Remove.
        (SSANORM_COALESCE_PARTITIONS, SSANORM_USE_COALESCE_LIST):
        Adjust their definitions.
        (remove_ssa_form): Don't check for SSANORM_REMOVE_ALL_PHIS.
        (rewrite_out_of_ssa): Don't use SSANORM_REMOVE_ALL_PHIS.

        * c-objc-common.h, c-pretty-print.c, cgraphunit.c, except.c,
        genautomata.c, langhooks.c, langhooks.h, system.h,
        config/arm/lib1funcs.asm: Update copyright.

2005-02-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * dbxout.c (dbxout_function_end): Emit Lscope label always.

2005-02-21  Richard Guenther  <rguenth@gcc.gnu.org>

        PR bootstrap/13770
        * doc/install.texi: Document --with-gc.

2005-02-21  Paolo Bonzini  <bonzini@gnu.org>

        * simplify-rtx.c (simplify_unary_operation): Add a missing
        "break" statement.

2005-02-21  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR tree-optimization/18663
        * tree-ssa-dom.c (extract_range_from_cond): Return 0
        if the type has variable bounds.

2005-02-20  Kazu Hirata  <kazu@cs.umass.edu>

        * gcse.c: Remove an obsolete comment.

        * cse.c (init_cse_reg_info): Use xmalloc instead of xrealloc.

2005-02-20  Hans-Peter Nilsson  <hp@axis.com>

        * doc/extend.texi (Function Attributes) <Attribute const>: The
        attribute "pure" is below this text, not above.

2005-02-20  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa.c (pa_assemble_integer, get_plabel): Small cleanups.
        (pa_asm_output_mi_thunk): Use asm_output_insn instead of fprintf.
        * som.h (ASM_OUTPUT_EXTERNAL_LIBCALL): Small cleanup.

2005-02-20  Zack Weinberg  <zack@codesourcery.com>

        PR 18785
        * langhooks.h (struct lang_hooks): Add to_target_charset.
        * langhooks.c (lhd_to_target_charset): New function.
        * langhooks-def.h: Declare lhd_to_target_charset.
        (LANG_HOOKS_TO_TARGET_CHARSET): New macro.
        (LANG_HOOKS_INITIALIZER): Update.
        * c-common.c (c_common_to_target_charset): New function.
        * c-common.h: Declare it.
        * c-objc-common.h (LANG_HOOKS_TO_TARGET_CHARSET): Set to
        c_common_to_target_charset.

        * defaults.c (TARGET_BELL, TARGET_BS, TARGET_CR, TARGET_DIGIT0)
        (TARGET_ESC, TARGET_FF, TARGET_NEWLINE, TARGET_TAB, TARGET_VT):
        Delete definitions.
        * system.h: Poison them.
        * doc/tm.texi: Don't discuss them.
        * builtins.c (fold_builtin_isdigit): Use lang_hooks.to_target_charset.
        * c-pretty-print.c (pp_c_integer_constant): Don't use pp_c_char.
        (pp_c_char): Do not attempt to generate letter escapes for
        newline, tab, etc.
        * config/arm/arm.c (output_ascii_pseudo_op): Likewise.
        * config/mips/mips.c (mips_output_ascii): Likewise.

2005-02-20  Dorit Naishlos  <dorit@il.ibm.com>

        PR tree-optimization/19951
        * tree-vect-analyze.c (vect_analyze_loop_form): Check if loop exit edge
        is abnormal.

2005-02-19  Steven Bosscher  <stevenb@suse.de>

        PR middle-end/19698
        * function.h (struct function): New field `max_loop_depth'.
        * cfgloop.c (establish_preds): Update maximum loop depth seen so far.
        (flow_loops_find): Reset the max loop depth count before finding loops.
        * flow.c (MAX_LIVENESS_ROUNDS): New constant.
        (update_life_info_in_dirty_blocks): Remove 2002-05-28 workaround.
        (calculate_global_regs_live): Make sure the loop will terminate
        when the initial sets are not empty.

2005-02-19  Zack Weinberg  <zack@codesourcery.com>

        * mklibgcc.in: If libgcc_eh.a would be empty, put a dummy
        object inside.
        * config/ia64/hpux.h: Don't define LIBGCC_SPEC.

2005-02-19  Richard Sandiford  <rsandifo@redhat.com>

        PR other/19525
        * doc/invoke.texi: Remove documentation of %M spec.
        * gcc.c: Likewise.
        (init_spec): Remove %M suffix from -lgcc_s.
        (do_spec_1): Remove 'M' case.
        * mklibgcc.in: Remove SHLIB_MULTILIB handling.  Expect SHLIB_LINK
        to put shared libraries in the multilib directory.  Remove the
        shlib_so_soname substitution variable.  Don't add a multilib encoding
        to shlib_base_name.  Set shlib_slibdir_qual to the full pathname
        reported by -print-multi-os-directory.  Pass @multilib_dir@ to
        SHLIB_INSTALL as well as SHLIB_LINK.
        * config/t-slibgcc-elf-ver (SHLIB_SONAME): Use @shlib_base_name@.
        (SHLIB_NAME): Delete.
        (SHLIB_DIR): New macro.
        (SHLIB_LINK): Put $(SHLIB_SONAME) and $(SHLIB_SOLINK) in $(SHLIB_DIR).
        (SHLIB_INSTALL): Adjust accordingly.
        * config/t-slibgcc-darwin: As for t-slibgcc-elf-ver.
        * config/t-slibgcc-sld: Likewise.
        * config/t-libunwind-elf (SHLIBUNWIND_NAME): Delete.
        (SHLIBUNWIND_SONAME): Use @shlib_base_name@.
        (SHLIBUNWIND_LINK): Put $(SHLIBUNWIND_SONAME) and $(SHLIB_SOLINK)
        in $(SHLIB_DIR).
        (SHLIBUNWIND_INSTALL): Adjust accordingly.
        * config/i386/t-nwld (SHLIB_SONAME): Delete.
        (SHLIB_LINK, SHLIB_INSTALL): Use SHLIB_NAME instead of SHLIB_SONAME.
        Use @shlib_base_name@ instead of @shlib_so_name@.
        * config/ia64/t-hpux (SHLIB_LINK): Put @shlib_base_name@.so.0
        and @shlib_base_name@.so in @multilib_dir@.
        (SHLIB_INSTALL): Adjust accordingly.  Add @shlib_slibdir_qual@
        to the install path.
        * config/mips/t-slibgcc-irix: As for t-slibgcc-elf-ver.
        (SHLIB_LINK): Remove previous workaround.
        * config/pa/t-hpux-shlib (SHLIB_DIR, SHLIB_SLIBDIR_QUAL): New macros.
        (SHLIB_LINK): Put $(SHLIB_SONAME) and $(SHLIB_NAME) in $(SHLIB_DIR).
        (SHLIB_INSTALL): Adjust accordingly.  Add $(SHLIB_SLIBDIR_QUAL) to
        the install path.
        * config/rs6000/t-aix43 (SHLIB_LINK): Put @shlib_base_name@.a in
        @multilib_dir@.  Use @multilib_dir@ to check for threading libraries.
        (SHLIB_INSTALL): Adjust accordingly.
        (SHLIB_LIBS): Use @multilib_dir@ to check for threading libraries.
        * config/rs6000/t-aix52: As for config/rs6000/t-aix43.
        * config/sh/t-linux (SHLIB_LINK, SHLIB_INSTALL): As for
        config/t-slibgcc-elf-ver.

2005-02-19  Zdenek Dvorak  <dvorakz@suse.cz>
            Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/19828
        * tree-ssa-loop-im.c: Add a TODO comment.
        (movement_possibility): Return MOVE_PRESERVE_EXECUTION for calls
        without side-effects.

2005-02-18  James A. Morrison  <phython@gcc.gnu.org>

        * tree-ssa-ccp.c (widen_bitfield): Pass type to build_int_cst and don't
        call fold_convert.

2005-02-18  James E. Wilson  <wilson@specifixinc.com>

        * doc/invoke.texi (IA-64 Options): Delete -mb-step.
        * config/ia64/ia64.c (last_group, group_idx): Delete variables.
        (errata_find_address_regs, errata_emit_nops, fixup_errata): Delete
        functions.
        (ia64_reorg): Delete fixup_errata call.
        * config/ia64/ia64.h (MASK_B_STEP, TARGET_B_STEP): Delete.
        (TARGET_SWITCHES): Delete -mb-step entry.

2005-02-19  Jakub Jelinek  <jakub@redhat.com>

        PR c/20043
        * c-typeck.c (composite_type): Handle quals in transparent unions.
        (type_lists_compatible_p): Likewise.

2005-02-18  Stan Shebs  <shebs@apple.com>

        * config/darwin.c (machopic_select_rtx_section): Don't put relocatable
        expressions in the .literal8 section.

2005-02-18  Geoffrey Keating  <geoffk@apple.com>

        * config/rs6000/darwin-tramp.asm: Remove stray 'APPLE LOCAL' marker.

2005-02-18  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (constant_boolean_node): Always create values of the
        specified type, don't bother calling truthvalue_conversion.

2005-02-18  Joseph S. Myers  <joseph@codesourcery.com>

        * except.c (output_function_exception_table): Call
        assemble_external_libcall (eh_personality_libfunc).

2005-02-18  Joseph S. Myers  <joseph@codesourcery.com>

        PR target/19886
        * config/ia64/ia64.h (struct machine_function): Add state_num.
        * config/ia64/ia64.c (process_epilogue,
        process_for_unwind_directive): Use new unwind state numbers each
        time rather than state 1.

2005-02-18  Ulrich Weigand  <uweigand@de.ibm.com>

        PR target/20054
        * config/s390/s390.md ("*llgt_sidi", "*llgt_sidi_split"): Move to
        before the "*llgt_didi" pattern.

2005-02-18  Jason Merrill  <jason@redhat.com>

        * gimplify.c (gimplify_modify_expr_rhs) [CALL_EXPR]: Revert again.

2005-02-18  Richard Earnshaw  <rearnsha@arm.com>

        * arm/lib1funcs.asm (FUNC_ALIAS): New macro.
        (div0): Use it in place of ARM_FUNC_ALIAS.
        (lshrdi3, ashrdi3, ashlrdi3): Likewise.

2005-02-18  Andrew Pinski  <pinskia@physics.uc.edu>

        PR middle-end/20030
        * fold-const.c (fold_indirect_ref_1): Use the correct index for zero
        access, the lower bound of the array type if it exists.

2005-02-18  Alexandre Oliva  <aoliva@redhat.com>

        PR c++/20008
        * stmt.c (expand_case): Don't assume cleanup_tree_cfg will remove
        cases that are out-of-range for the index type.

2005-02-18  James A. Morrison  <phython@gcc.gnu.org>

        * stmt.c (emit_case_bit_tests): Call fold_convert instead of convert.
        (estimate_case_costs): Don't call convert.
        * expmed.c (expand_shift): Likewise.
        (make_tree): Call fold_convert instead of convert.

2005-02-18  Jakub Jelinek  <jakub@redhat.com>

        PR c++/19813
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Add assertion
        that ref to be marked MEM_READONLY_P doesn't have base that needs
        constructing.

2005-02-18  Joseph S. Myers  <joseph@codesourcery.com>

        * genautomata.c (output_get_cpu_unit_code_func,
        output_cpu_unit_reservation_p): Don't generate old-style function
        definitions.

2005-02-18  Jakub Jelinek  <jakub@redhat.com>

        PR c++/20023
        PR tree-optimization/20009
        * convert.c (convert_to_integer): Revert 2005-02-16 change.

        PR tree-optimization/18947
        * cgraphunit.c (cgraph_finalize_function): When redefining an extern
        inline, remove all nodes that are inlined into the extern inline
        being redefined.

2005-02-17  Kazu Hirata  <kazu@cs.umass.edu>

        * bt-load.c, cfgloop.c, convert.c, dominance.c, global.c,
        loop-invariant.c, stmt.c, tree-ssa-forwprop.c,
        tree-ssa-live.c, tree-ssanames.c, tree-vn.c,
        config/host-linux.c, config/arm/fpa.md, config/avr/avr.h:
        Update copyright.

2005-02-17  Roger Sayle  <roger@eyesopen.com>

        PR tree-optimization/19917
        * tree-eh.c (tree_could_trap_p): Consider calls to weak functions
        to be potentially trapping.

2005-02-17  Kazu Hirata  <kazu@cs.umass.edu>

        * libgcc2.c, tree-vect-analyze.c: Fix comment typos.

2005-02-17  Andreas Krebbel  <krebbel1@de.ibm.com>

        * builtins.c (expand_builtin_return_addr): Remove tem parameter.
        tem becomes a local variable which is set to the value of the
        back end defined INITIAL_FRAME_ADDRESS macro.
        (expand_builtin_frame_address): Omit the base parameter to
        expand_builtin_return_addr.
        (expand_builtin_profile_func): Likewise.
        * config/s390/s390.h (INITIAL_FRAME_ADDRESS_RTX): Define new macro.
        (DYNAMIC_CHAIN_ADDRESS): Remove the case for the initial frame.
        * doc/tm.texi: Documentation for INITIAL_FRAME_ADDRESS_RTX added.

2005-02-17  Jakub Jelinek  <jakub@redhat.com>

        * config/s390/s390.c (s390_alloc_pool, s390_free_pool,
        s390_chunkify_start): Use BITMAP_ALLOC and BITMAP_FREE.
        * config/frv/frv.c (frv_function_epilogue): Likewise.

2005-02-17  Daniel Berlin  <dberlin@dberlin.org>

        * lambda-code (perfect_nestify): Remove mark/unmark
        for rewriting hack.
        * tree-loop-linear.c (linear_transform_loops): Add
        rewrite_into_ssa call so that ssa is correct for
        rewriting into loop closed.

2005-02-17  Nathan Sidwell  <nathan@codesourcery.com>

        * bitmap.h (BITMAP_XMALLOC, BITMAP_XFREE): Remove.
        * bb-reorder.c (duplicate_computed_gotos): Use BITMAP_ALLOC and
        BITMAP_FREE.
        * bt-load.c (btr_def_live_range, combine_btr_defs,
        migrate_btr_def, migrate_btr_defs): Likewise.
        * cfgcleanup.c (thread_jump): Likewise.
        * cfgloop.c (get_loop_body_in_bfs_order): Likewise.
        * df.c (df_insn_table_realloc, df_bitmaps_alloc, df_bitmaps_free,
        df_alloc, df_free, df_du_chain_create, df_bb_rd_local_compute,
        df_rd_local_compute, df_reg_info_compute): Likewise.
        * dominance.c (init_dom_info, free_dom_info): Likewise.
        * flow.c (init_propagate_block_info,
        free_propagate_block_info): Likewise.
        * gcse.c (alloc_gcse_mem, free_gcse_mem): Likewise.
        * global.c (allocate_bb_info, free_bb_info, calculate_reg_pav,
        modify_reg_pav): Likewise.
        * loop-invariant.c (find_defs, find_invariant_insn,
        find_invariants, free_inv_motion_data): Likewise.
        * predict.c (tree_predict_by_opcode,
        estimate_bb_frequencies): Likewise.
        * stmt.c (expand_case): Likewise.
        * tree-cfg.c (tree_duplicate_sese_region): Likewise.
        * tree-dfa.c (mark_new_vars_to_rename): Likewise.
        * tree-if-conv.c (get_loop_body_in_if_conv_order): Likewise.
        * tree-into-ssa.c (insert_phi_nodes_for, def_blocks_free,
        get_def_blocks_for, mark_def_site_blocks, rewrite_into_ssa,
        rewrite_ssa_into_ssa): Likewise.
        * tree-optimize.c (tree_rest_of_compilation): Likewise.
        * tree-outof-ssa.c (new_temp_expr_table, free_temp_expr_table,
        analyze_edges_for_bb, perform_edge_inserts): Likewise.
        * tree-scalar-evolution.c (scev_initialize, scev_finalize): Likewise.
        * tree-sra.c (tree_sra): Likewise.
        * tree-ssa-alias.c (init_alias_info, delete_alias_info): Likewise.
        * tree-ssa-ccp.c (ccp_fold_builtin): Likewise.
        * tree-ssa-dce.c (tree_dce_init, tree_dce_done): Likewise.
        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Likewise.
        * tree-ssa-dse.c (tree_ssa_dse): Likewise.
        * tree-ssa-forwprop.c (tree_ssa_forward_propagate_single_use_var):
        Likewise.
        * tree-ssa-live.c (new_tree_live_info, delete_tree_live_info,
        calculate_live_on_entry, calculate_live_on_exit,
        build_tree_conflict_graph): Likewise.
        * tree-ssa-loop-ivopts.c (tree_ssa_iv_optimize_init, record_use,
        record_important_candidates, set_use_iv_cost, find_depends,
        determine_use_iv_costs, iv_ca_new, iv_ca_free, free_loop_data,
        tree_ssa_iv_optimize_finalize): Likewise.
        * tree-ssa-loop-manip.c (add_exit_phis_var, get_loops_exit,
        find_uses_to_rename_use, rewrite_into_loop_closed_ssa,
        tree_duplicate_loop_to_header_edge): Likewise.
        * tree-ssa-pre.c (init_pre, fini_pre): Likewise.
        * tree-ssa.c (verify_flow_insensitive_alias_info,
        verify_name_tags, verify_ssa, init_tree_ssa,
        delete_tree_ssa): Likewise.
        * tree-ssanames.c (marked_ssa_names, init_ssanames,
        fini_ssanames): Likewise.
        * tree-vectorizer.c (slpeel_tree_peel_loop_to_edge): Likewise.

2005-02-17  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/rs6000/t-rtems: Completely reworked.

2005-02-17  Ira Rosen  <irar@il.ibm.com>

        * tree-data-ref.c (array_base_name_differ_p): Remove gcc_assert.

2005-02-17  Ira Rosen  <irar@il.ibm.com>

        * tree-vect-analyze.c (vect_analyze_pointer_ref_access): Use
        POINTER_TYPE_P when checking that type is a pointer.
        (vect_get_memtag): Remove.
        (vect_address_analysis): Use POINTER_TYPE_P. Call
        vect_object_analysis with dummy parameter for memtag.
        (vect_object_analysis): Extract memtag (functionality that
        used to be in vect_get_memtag and moved here). Fix printings.
        (vect_analyze_data_refs): Fix comment. Call vect_object_analysis
        with correct parameters. Remove call to vect_get_memtag.

2005-02-17  Dorit Naishlos  <dorit@il.ibm.com>

        * Makefile.in (tree-vect-analyze.o, tree-vect-transform.o): New.
        (tree-vectorizer.o): Added missing dependencies.

        * tree-vectorizer.h (vect_dump, vect_verbosity_level): Added extern
        decleration.
        (slpeel_tree_peel_loop_to_edge): Function externalized (had a static
        declaration in tree-vectorizer.c, now has an extern declaration in
        tree-vectorizer.h).
        (slpeel_make_loop_iterate_ntimes, slpeel_can_duplicate_loop_p,
        slpeel_verify_cfg_after_peeling, vect_strip_conversion,
        get_vectype_for_scalar_type, vect_is_simple_use,
        vect_is_simple_iv_evolution, vect_can_force_dr_alignment_p,
        vect_supportable_dr_alignment, new_loop_vec_info, destroy_loop_vec_info,
        new_stmt_vec_info, vect_analyze_loop, vectorizable_load,
        vectorizable_store, vectorizable_operation, vectorizable_assignment,
        vect_transform_loop, vect_print_dump_info, vect_set_verbosity_level,
        find_loop_location): Likewise.

        * tree-vectorizer.c (langhooks.h): #include removed.
        (slpeel_tree_peel_loop_to_edge): Function externalized. Declaration
        moved to tree-vectorized.h.
        (slpeel_make_loop_iterate_ntimes, slpeel_can_duplicate_loop_p,
        slpeel_verify_cfg_after_peeling, vect_strip_conversion,
        get_vectype_for_scalar_type, vect_is_simple_use,
        vect_is_simple_iv_evolution, vect_can_force_dr_alignment_p,
        vect_supportable_dr_alignment, new_loop_vec_info,
        destroy_loop_vec_info, new_stmt_vec_info, vect_print_dump_info,
        vect_set_verbosity_level, find_loop_location): Likewise.

        (vect_analyze_loop): Function externalized. Declaration moved to
        tree-vectorized.h. Function definition moved to tree-vect-analyze.c.
        (vect_analyze_loop_form): Moved to tree-vect-analyze.c.
        (vect_mark_stmts_to_be_vectorized, vect_analyze_scalar_cycles,
        vect_analyze_data_ref_accesses, vect_analyze_data_ref_dependences,
        vect_analyze_data_refs_alignment, vect_compute_data_refs_alignment,
        vect_enhance_data_refs_alignment, vect_analyze_operations,
        exist_non_indexing_operands_for_use_p, vect_mark_relevant,
        vect_stmt_relevant_p, vect_get_loop_niters,
        vect_analyze_data_ref_dependence, vect_compute_data_ref_alignment,
        vect_analyze_data_ref_access, vect_analyze_pointer_ref_access,
        vect_can_advance_ivs_p, vect_get_ptr_offset, vect_analyze_offset_expr,
        vect_base_addr_differ_p, vect_object_analysis, vect_address_analysis,
        vect_get_memtag): Likewise.

        (vectorizable_load): Function externalized. Declaration moved to
        tree-vectorized.h. Function definition moved to tree-vect-transform.c.
        (vectorizable_store, vectorizable_operation, vectorizable_assignment,
        vect_transform_loop): Likewise.
        (vect_transform_stmt): Moved to tree-vect-transform.c.
        (vect_align_data_ref, vect_create_destination_var,
        vect_create_data_ref_ptr, vect_create_index_for_vector_ref,
        vect_create_addr_base_for_vector_ref, vect_get_new_vect_var,
        vect_get_vec_def_for_operand, vect_init_vector,
        vect_finish_stmt_generation, vect_generate_tmps_on_preheader,
        vect_build_loop_niters, vect_update_ivs_after_vectorizer,
        vect_gen_niters_for_prolog_loop, vect_update_inits_of_dr,
        vect_update_inits_of_drs, vect_do_peeling_for_alignment,
        vect_do_peeling_for_loop_bound): Likewise.

        * tree-vect-analyze.c: New file.
        * tree-vect-transform.c: New file.

2005-02-17  Jason Merrill  <jason@redhat.com>

        PR mudflap/19319, c++/19317
        * gimplify.c (gimplify_modify_expr_rhs) [CALL_EXPR]: Make return
        slot explicit.

2005-02-17  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/install.texi (Specific): Update link for Darwin-specific
        tool binary site.

2005-02-16  James A. Morrison  <phython@gcc.gnu.org>

        * fold-const.c (invert_truthvalue): <INTEGER_CST>: Call
        constant_boolean_node.

2005-02-16  David Edelsohn  <edelsohn@gnu.org>

        PR target/19019
        * config/rs6000/t-aix43 (SHLIB_MAPFILES): Add libgcc-ppc64.ver.
        * config/rs6000/t-aix52 (SHLIB_MAPFILES): Same.

2005-02-16  Richard Henderson  <rth@redhat.com>

        PR 19920
        * libgcc2.c (WORD_SIZE): Remove all definitions; replace uses
        with W_TYPE_SIZE.
        (HIGH_WORD_COEFF, HIGH_HALFWORD_COEFF): Remove all definitions;
        replace uses with Wtype_MAXp1_F.
        (L_fixunstfdi, L_fixtfdi, L_floatditf, L_fixunsxfdi, L_fixxfdi,
        L_floatdixf, L_fixunsxfsi, L_fixunsdfdi, L_floatdidf, L_fixunsdfsi,
        L_powidf2, L_powixf2, L_powitf2, L_muldc3, L_divdc3, L_mulxc3,
        L_divxc3, L_multc3, L_divtc3): Protect with HAVE_DFMODE, HAVE_XFMODE,
        and HAVE_TFMODE as appropriate.
        (__fixunssfDI): Provide an implementation that doesn't need DFmode.
        (__floatdisf): Likewise.
        * libgcc2.h (LIBGCC2_DOUBLE_TYPE_SIZE): New.
        (HAVE_DFMODE, HAVE_XFMODE, HAVE_TFMODE): New.
        (Wtype_MAXp1_F): New.
        (DFtype, DCtype, __fixdfdi, __floatdidf, __fixunsdfSI, __fixunsdfDI,
        __powidf2, __divdc3, __muldc3): Protect with HAVE_DFMODE.

2005-02-16  Richard Earnshaw  <rearnsha@arm.com>

        * PR target/19162
        * arm.c (arm_apply_result_size): New function.
        * arm.h (APPLY_RESULT_SIZE): Define.
        * arm-protos.h (arm_apply_result_size): Add prototype.
        * arm.md (RO_REGNUM, FPA_F0_REGNUM, FPA_F7_REGNUM): New constants.
        (movxf): New expand.
        (ldmsi_postinc4_thumb, stmsi_postinc4_thumb): New patterns for Thumb.
        (call_value_symbol): Remove predicate for operand 0.
        (call_value_insn, sibcall_value, sibcall_value_insn): Likewise.
        (untyped_call): Rework to correclty return values for any type.
        (untyped_return): New expand.
        * fpa.md (movxf_fpa): Simplify and use sfm/lfm when appropriate.

2005-02-16  Stan Shebs  <shebs@apple.com>

        * config.gcc (powerpc-*-darwin*): Use fragment for Darwin 8 or later.
        * config/rs6000/t-darwin8: New, for 64-bit multilib.

2005-02-16  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * doc/install.texi (sparc-sun-solaris2*): Document required GMP
        configure settings on Solaris 7 and later.

2005-02-16  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19865
        * tree-optimize.c (init_tree_optimization_passes): Run
        pass_may_alias after pass_sra.

2005-02-16  Richard Henderson  <rth@redhat.com>
            Stuart Hastings  <stuart@apple.com>

        PR debug/19521
        * dbxout.c (dbxout_function_end): Take decl parameter; update callers.
        Do nothing if debug info suppressed for this function.
        (dbxout_begin_function): Early exit if debug info suppressed for
        this function.

2005-02-16  Kazu Hirata  <kazu@cs.umass.edu>

        PR target/20007
        * config/ip2k/ip2k.c (ip2k_reorg): Adjust calls to
        find_basic_blocks.
        * config/sh/sh.c (sh_output_mi_thunk): Likewise.

        PR tree-optimization/19967
        * builtins.c (expand_builtin_strstr, expand_builtin_strpbrk,
        expand_builtin_strchr, expand_builtin_strrchr): Take a new
        argument TYPE.  Adjust calls to fold_builtin_XXX.
        (expand_builtin, fold_builtin_1): Adjust calls to
        expand_builtin_XXX.
        (fold_builtin_strchr, fold_builtin_strpbrk,
        fold_builtin_strstr, fold_builtin_strrchr): Convert the folded
        result to a requested type TYPE.

2005-02-16  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/19857
        * fold-const.c (fold): Don't optimize (T)(x & cst) to
        (T)x & (T)cst if (T)cst overflows.
        * convert.c (convert_to_integer) <case POINTER_TYPE>: Pass
        TYPE_UNSIGNED (type) as type_for_size's UNSIGNEDP argument.

2005-02-15  Jeff Law  <law@redhat.com>

        * gcse.c (blocks_with_calls): New bitmap.
        (alloc_gcse_mem): Allocate it.
        (free_gcse_mem): Free it.
        (clear_modifY_mem_tables): Clear it.
        (record_last_mem_set_info): Set the proper bit in BLOCK_WITH_CALLS
        when we encounter CALL_INSNs.
        (compute_transp, case MEM): Handle blocks with calls separate
        from blocks without calls.  Use bitmap iterators rather than
        FOR_EACH_BB.

2005-02-15  Peter O'Gorman  <peter@pogma.com>

        PR bootstrap/18810
        * mklibgcc.in (vis_hide): Use a temporary object file, not
        -o /dev/null.

2005-02-15  Andy Hutchinson  <HutchinsonAndy@netscape.net>

        PR target/19924
        * config/avr/avr.h (MODES_TIEABLE_P): Define to 1 to allow subreg
        access optimization.

2005-02-15  David Edelsohn  <edelsohn@gnu.org>
            Alan Modra  <amodra@bigpond.net.au>

        PR target/19019
        * config/rs6000/darwin-ldouble.c (_xlqadd): Rename to __gcc_qadd.
        (_xlqsub): Rename to __gcc_qsub.
        (_xlqmul): Rename to __gcc_qmul.
        (_xlqdiv): Rename to __gcc_qdiv.
        Provide versioned symbol aliases with old names.
        * config/rs6000/libgcc-ppc64.ver: Rename symbols.
        * config/rs6000/rs6000.c (rs6000_init_libfuncs): Rename symbols.
        * config/rs6000/t-aix43 (LIB2FUNCS_EXTRA): New.
        * config/rs6000/t-aix52 (LIB2FUNCS_EXTRA): New.
        * config/rs6000/t-newas (LIB2FUNCS_EXTRA): New.

2005-02-15  James A. Morrison  <phython@gcc.gnu.org>

        * fold-const.c (fold): Fold -(~A) to A + 1.  Fold ~(-A) to A - 1.
        Fold ~(A - 1) and ~(A + -1) to -A.

2005-02-15  James A. Morrison  <phython@gcc.gnu.org>

        PR pch/14940
        PR target/19300
        * config/host-linux.c (linux_gt_pch_use_address): Copy from
        config/pa/pa-host.c:pa_gt_pch_use_address.

2005-02-15  Daniel Berlin  <dberlin@dberlin.org>

        * tree-vn.c (get_value_handle): Make sure that given an
        is_gimple_min_invariant expression, we always return it.

2005-02-15  Kazu Hirata  <kazu@cs.umass.edu>

        * passes.c (rest_of_handle_gcse): Fix a comment.

2005-02-15  Jeff Law  <law@redhat.com>

        * gcse.c (canon_modify_mem_set_list_set): Kill unnecessary
        bitmap.
        (alloc_gcse_mem, free_gcse_mem): Corresponding changes.
        (canon_list_insert, record_last_mem_set_info): Similarly.
        (clear_modify_mem_tables): Similarly.

2005-02-15  Kazu Hirata  <kazu@cs.umass.edu>

        * bitmap.c, bitmap.h, lambda-code.c, tree-dfa.c, tree-dump.c,
        tree-dump.h, tree-ssa-loop-manip.c, value-prof.c,
        config/mips/mips.md, config/rs6000/aix.h,
        config/rs6000/beos.h, config/rs6000/sysv4.h: Update copyright.

2005-02-15  Richard Henderson  <rth@redhat.com>

        * bb-reorder.c (find_traces_1_round): Force fallthru edge from a
        call to be best_edge.

2005-02-14  Kazu Hirata  <kazu@cs.umass.edu>

        * basic-block.h: Adjust the prototype for find_basic_blocks.
        * cfgbuild.c (find_basic_blocks): Remove unused arguments.
        * passes.c (rest_of_handle_loop_optimize): Adjust the call to
        find_basic_blocks.

        * flow.c (recompute_reg_usage): Remove all arguments.
        * passes.c (rest_of_compilation): Adjust the call to
        recompute_reg_usage.
        * rtl.h: Adjust the prototype for recompute_reg_usage.

2005-02-14  Daniel Berlin  <dberlin@dberlin.org>

        * tree-dump.c (dump_files): Update to reflect new member
        of dump_file_info.
        (dump_register): Add new argument.
        Set glob name.
        (dump_switch_p_1): Check against glob name if doglob was passed.
        (dump_switch_p): Check against regular first, then glob if
        we didn't have any hits on the dump name.
        * tree-optimize.c (register_one_dump_file):
        Pass in glob name as well.
        * tree-pass.h (struct dump_file_info): Add glob
        member.

2005-02-14  Joseph S. Myers  <joseph@codesourcery.com>

        PR preprocessor/16323
        * doc/invoke.texi: Document that -Wendif-labels is on by default.

2005-02-14  David Edelsohn  <edelsohn@gnu.org>

        PR target/19019
        * config/rs6000/rs6000.md (trunctfdf2): Change to define_expand.
        (trunctfdf2_internal1): New.
        (trunctfdf2_internal2): Renamed from trunctfdf2.

2005-02-14  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19853
        * tree-dfa.c (add_referenced_var): Always examine DECL_INITIAL.

2005-02-14  Kazu Hirata  <kazu@cs.umass.edu>

        * passes.c (rest_of_handle_loop_optimize): Remove calls to
        delete_dead_jumptables and cleanup_cfg.

2005-02-14  Ulrich Weigand  <uweigand@de.ibm.com>

        * reload.c (find_reloads): Swap address_reloaded flags when
        swapping commutative operands.

2005-02-14  Sebastian Pop  <pop@cri.ensmp.fr>

        * lambda-code.c (lambda_loopnest_to_gcc_loopnest, perfect_nestify):
        Use standard_iv_increment_position for computing the bsi position
        for create_iv.
        * tree-ssa-loop-manip.c (create_iv): Add a comment on how to compute
        the bsi position.

2005-02-13  Zdenek Dvorak  <dvorakz@suse.cz>

        PR target/17428
        * cfgrtl.c (safe_insert_insn_on_edge): Avoid extending
        life range of hard registers.
        * value-prof.c (insn_prefetch_values_to_profile): Only
        scan normal insns.

        * value-prof.c (rtl_find_values_to_profile): Do not look for values to
        profile in libcalls.

2005-02-13  Nathan Sidwell  <nathan@codesourcery.com>

        * bitmap.h (bitmap_and_compl_into): Return bool.
        * bitmap.c (bitmap_and_compl_into): Return changed flag.

2005-02-13  James A. Morrison  <phython@gcc.gnu.org>

        PR tree-optimization/19944
        * fold-const.c (fold): Re-add ABS_EXPR folding.

2005-02-13  David Edelsohn  <edelsohn@gnu.org>

        PR target/19019
        * config/rs6000/aix.h ({TARGET,MASK}_XL_CALL): Rename to
        {TARGET,MASK}_XL_COMPAT.
        (SUBTARGET_SWITCHES): Rename xl-call to xl-compat.  Use
        MASK_XL_COMPAT.
        * config/rs6000/beos.h ({TARGET,MASK}_XL_CALL): Remove.
        * config/rs6000/rs6000.c (function_arg): Change TARGET_XL_CALL to
        TARGET_XL_COMPAT.
        (rs6000_arg_partial_bytes): Same.
        (rs6000_generate_compare): Generate PARALLEL for compare if TFmode
        and XL compatibility enabled.
        * config/rs6000/rs6000.h (TARGET_XL_CALL): Rename to TARGET_XL_COMPAT.
        * config/rs6000/rs6000.md (cmptf_internal1): Add !TARGET_XL_COMPAT
        test to final condition.
        (cmptf_internal2): New.
        * doc/invoke.texi (RS/6000 Subtarget Options): Change xl-call to
        xl-compat.  Add TFmode information to description.

2005-02-13  Kazu Hirata  <kazu@cs.umass.edu>

        * flags.h, read-rtl.c, tree-ssa-live.h: Update copyright.

2005-02-13  Jason Merrill  <jason@redhat.com>

        PR c++/16405
        * fold-const.c (fold_indirect_ref_1): Split out from...
        (build_fold_indirect_ref): Here.
        (fold_indirect_ref): New fn.
        * tree.h: Declare it.
        * gimplify.c (gimplify_compound_lval): Call fold_indirect_ref.
        (gimplify_modify_expr_rhs): Likewise.
        (gimplify_expr): Likewise.

2005-02-13  James A. Morrison  <phython@gcc.gnu.org>

        PR tree-optimization/14303
        PR tree-optimization/15784
        * fold-const.c (fold): Fold ABS_EXPR<x> >= 0 to true, when possible.
        Fold ABS_EXPR<x> < 0 to false.  Fold ABS_EXPR<x> == 0 to x == 0 and
        ABS_EXPR<x> != 0 to x != 0.

2005-02-12  Kazu Hirata  <kazu@cs.umass.edu>

        * c-tree.h, combine.c, expmed.c, flow.c, libgcc2.c,
        simplify-rtx.c, tree-ssa-live.h: Fix comment typos.  Follow
        spelling conventions.

        * passes.c (rest_of_handle_gcse): Don't run cse_main and
        delete_trivially_dead_insns too many times.

        * passes.c (rest_of_handle_gcse): Remove dead assignments to
        tem and tem2.

2005-02-12  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.c (vect_get_base_and_offset): Remove.
        (vect_is_simple_iv_evolution): Remove redundant parameter
        and step check.
        (vect_analyze_scalar_cycles): Call vect_is_simple_iv_evolution
        without last parameter.
        (vect_analyze_pointer_ref_access): Get access_fn as parameter.
        Return pointer step. Call vect_is_simple_iv_evolution without
        last parameter. Check only that the step is multiple of size
        type. Remove stmt_vinfo updates.
        (vect_get_memtag_and_dr): Remove.
        (vect_get_memtag): New function.
        (vect_address_analysis): New function.
        (vect_object_analysis): New function.
        (vect_analyze_data_refs): Call vect_object_analysis and
        vect_get_memtag. Update stmt_vinfo fields.

2005-02-12  Ira Rosen  <irar@il.ibm.com>

        * tree-data-ref.c (array_base_name_differ_p): Check that the bases
        exist and are objects. Remove checks for pointer.
        * tree-vectorizer.c (vect_create_addr_base_for_vector_ref): Use
        STMT_VINFO_VECT_DR_BASE_ADDRESS instead of DR_BASE_NAME.
        (vect_create_data_ref_ptr): Likewise.
        (vect_base_addr_differ_p): New function.
        (vect_analyze_data_ref_dependence): Call vect_base_addr_differ_p.
        (vect_analyze_pointer_ref_access): Add output parameter - ptr_init.
        Don't set the DR_BASE_NAME field of data-ref.
        (vect_get_memtag_and_dr): Use ptr_init instead of DR_BASE_NAME.

2005-02-12  Uros Bizjak  <uros@kss-loka.si>

        * optabs.h (enum optab_index): Add new OTI_ldexp.
        (ldexp_optab): Define corresponding macro.
        * optabs.c (init_optabs): Initialize ldexp_optab.
        * genopinit.c (optabs): Implement ldexp_optab using ldexp?f3
        patterns.
        * builtins.c (expand_builtin_mathfn_2): Handle BUILT_IN_LDEXP{,F,L}
        using ldexp_optab.
        (expand_builtin): Expand BUILT_IN_LDEXP{,F,L} using
        expand_builtin_mathfn_2 if flag_unsafe_math_optimizations is set.

        * config/i386/i386.md (ldexpsf3, ldexpdf3, ldexpxf3): New expanders
        to implement ldexpf, ldexp and ldexpl built-ins as inline x87
        intrinsics.

2005-02-12  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.h (struct _stmt_vec_info): Rename a field: base
        to base_address.
        * tree-vectorizer.c (new_stmt_vec_info): Rename the above field of
        stmt_vec_info.
        (vect_get_base_and_offset): Always return an address.
        (vect_create_addr_base_for_vector_ref): Remove treatment for
        different data reference types.
        (vect_compute_data_ref_alignment): Rename base to base_address in
        stmt_vec_info. Get the object in order to force its alignment.
        (vect_get_memtag_and_dr): Rename base to base_address in
        stmt_vec_info. Extract the object for memtag analysis.

2005-02-12  Hans-Peter Nilsson  <hp@axis.com>

        PR regression/19898.
        * config/cris/cris.c (cris_notice_update_cc): When testing if insn
        changes cc_status, use apply modified_in_p to part of cc_status
        and insn, not cris_reg_overlap_mentioned_p on SET_DEST of insn
        body.

2005-02-11  Richard Henderson  <rth@redhat.com>

        * tree-complex.c (expand_complex_libcall): New.
        (expand_complex_multiplication): Use it for c99 compliance.
        (expand_complex_division): Likewise.
        * fold-const.c (fold_complex_add, fold_complex_mult): New.
        (fold): Call them.
        * builtins.c (built_in_names): Remove const.
        * tree.c (build_common_builtin_nodes): Build complex arithmetic
        builtins.
        * tree.h (BUILT_IN_COMPLEX_MUL_MIN, BUILT_IN_COMPLEX_MUL_MAX): New.
        (BUILT_IN_COMPLEX_DIV_MIN, BUILT_IN_COMPLEX_DIV_MAX): New.
        (built_in_names): Remove const.
        * c-common.c (c_common_type_for_mode): Handle complex modes.
        * flags.h, toplev.c (flag_complex_method): Rename from
        flag_complex_divide_method.
        * libgcc2.c (__divsc3, __divdc3, __divxc3, __divtc3,
        __mulsc3, __muldc3, __mulxc3, __multc3): New.
        * libgcc2.h: Declare them.
        * libgcc-std.ver: Export them.
        * mklibgcc.in (lib2funcs): Build them.

2005-02-11  Steven Bosscher  <stevenb@suse.de>

        PR tree-optimization/19876
        Partially revert my change from 2005-01-14
        * tree-ssa-pre.c (compute_antic_aux): Make recursive once again...
        (compute_antic): ...and remove the loop here.

2005-02-11  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/19858
        * fold-const.c (make_bit_field_ref): If bitpos == 0 and bitsize
        is number of inner's bits, avoid creating a BIT_FIELD_REF.

        * config/rs6000/sysv4.h (ENDFILE_LINUX_SPEC): Use crtendS.o instead of
        crtend.o if -pie.  Use %{x:a;:b} spec syntax.

2005-02-11  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/mips/linux-unwind.h (mips_fallback_frame_state): Adjust
        offsets for the big-endian 32-bit case.

2005-02-11  Joseph S. Myers  <joseph@codesourcery.com>

        * config/ia64/hpux.h (WCHAR_TYPE, WCHAR_TYPE_SIZE): Define.

2005-02-11  Dale Johannesen  <dalej@apple.com>

        * cselib.c (cselib_process_insn):  Clear out regs where
        HARD_REGNO_CALL_PART_CLOBBERED is true at a call.
        * reload.c (find_equiv_reg): Ditto.

2005-02-11  Ian Lance Taylor  <ian@airs.com>

        * read-rtl.c (read_rtx_1): Give fatal error if we see a vector
        with no elements.

        * tree.c (build_function_type_list): Work correctly if there are
        no arguments.

2005-02-11  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/s390.md ("*cmpdi_cct", "*cmpsi_cct", "*cmpdi_ccs",
        "*cmpsi_ccs"): Use %h instead of %c to print immediate operand.
        ("*zero_extendhisi2_64", "*zero_extendhisi2_31"): Choose based on
        TARGET_ZARCH instead of TARGET_64BIT.

2005-02-11  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/rs6000/t-rtems:
        (MULTILIB_OPTIONS): Remove mcpu=602.
        (MUTLILIB_DIRNAMES): Remove m602.
        (MULTILIB_MATCHES): Add ${MULTILIB_MATCHES_FLOAT}.
        Let mcpu=602 match mcpu=603.
        (MULTILIB_NEW_EXCEPTIONS_ONLY): Add mcpu=601, mcpu=602, mcpu=m603.

2005-02-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa/linux-unwind.h (pa32_fallback_frame_state): Handle misaligned
        signal trampolines.

2005-02-10  David Daney  <ddaney@avtrex.com>

        * config/alpha/linux-unwind.h: Add exception clause to copyright.
        * config/i386/linux-unwind.h: Likewise.
        * config/ia64/linux-unwind.h: Likewise.
        * config/mips/linux-unwind.h: Likewise.
        * config/pa/linux-unwind.h: Likewise.
        * config/rs6000/linux-unwind.h: Likewise.
        * config/s390/linux-unwind.h: Likewise.
        * config/sh/linux-unwind.h: Likewise.
        * config/sparc/linux-unwind.h: Likewise.

2005-02-10  Steven Bosscher  <stevenb@suse.de>

        PR tree-optimization/17549
        * tree-outof-ssa.c (find_replaceable_in_bb): Do not allow
        TER to replace a DEF with its expression if the DEF and the
        rhs of the expression we replace into have the same root
        variable.

2005-02-10  Richard Sandiford  <rsandifo@redhat.com>

        * config/mips/mips.md: Fix the placement of the match_scratch in the
        lea64 peephole2.

2005-02-10  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c, tree-ssa-loop-ivopts.c, config/rs6000/linux-unwind.h:
        Fix comment typos.

2005-02-10  Zdenek Dvorak  <dvorakz@suse.cz>

        * tree-ssa-loop-ivopts.c (determine_base_object): Ignore casts.
        (strip_offset): Handle addresses.
        (add_address_candidates): Use strip_offset.
        (difference_cost): Reflect strip_offset change.
        (force_var_cost, difference_cost): Strip nops.

2005-02-10  Kazu Hirata  <kazu@cs.umass.edu>

        * df.h (DF_REF_MODE_CHANGE, DF_REF_MEM_OK): Remove.

        * builtins.def, haifa-sched.c, libgcc2.c, libgcc2.h,
        tree-ssa-loop-ivcanon.c, tree-ssa-loop-niter.c,
        config/cris/cris-protos.h, config/cris/cris.c: Update
        copyright.

2005-02-10  Jeff Law  <law@redhat.com>

        * tree-ssa-dom.c (thread_across_edge): Use xmalloc, not xcalloc.
        (lookup_avail_expr): Similarly.

2005-02-10  Richard Guenther  <rguenth@gcc.gnu.org>

        * builtins.c (fold_builtin_powi): New function.
        (fold_builtin_1): Call it.

2005-02-10  Steven Bosscher  <stevenb@suse.de>

        PR documentation/19309
        * doc/cpp.texi: The __GNUC__ and related predefined macros
        are also defined for the "standalone" cpp.
        Some non-GCC compilers may also define __GNUC__.

2005-02-10  Jakub Jelinek  <jakub@redhat.com>

        PR c/19342
        * c-typeck.c (common_type): New routine.  Old common_type renamed
        to...
        (c_common_type): ...this.
        (build_conditional_expr, build_binary_op): Use c_common_type instead
        of common_type.

2005-02-10  Steven Bosscher  <stevenb@suse.de>

        * doc/md.texi: Replace @samp{length} with @code{length}.

2005-02-09  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/18687
        * tree-flow.h (find_loop_niter): Declare.
        * tree-ssa-loop-ivcanon.c (canonicalize_loop_induction_variables):
        Try using scev even for loops with more than one exit.
        * tree-ssa-loop-ivopts.c (struct loop_data): Removed niter field.
        (struct ivopts_data): Added niters field.
        (struct nfe_cache_elt): New.
        (nfe_hash, nfe_eq, niter_for_exit, niter_for_single_dom_exit): New
        functions.
        (tree_ssa_iv_optimize_init): Initialize niters cache.
        (determine_number_of_iterations): Removed.
        (find_induction_variables): Do not call determine_number_of_iterations.
        Access niters for single exit through niter_for_single_dom_exit.
        (add_iv_outer_candidates): Access niters for single exit through
        niter_for_single_dom_exit.
        (may_eliminate_iv): Take data argument.  Use niter_for_exit.  Do not use
        number_of_iterations_cond.
        (iv_period): New function.
        (determine_use_iv_cost_condition): Pass data to may_eliminate_iv.
        (may_replace_final_value): Take data argument.  Use
        niter_for_single_dom_exit.
        (determine_use_iv_cost_outer): Pass data to may_replace_final_value.
        (rewrite_use_compare): Pass data to may_eliminate_iv.
        (rewrite_use_outer): Pass data to may_replace_final_value.
        (free_loop_data): Clean up the niters cache.
        (tree_ssa_iv_optimize_finalize): Free the niters cache.
        (tree_ssa_iv_optimize_loop): Do not call loop_commit_inserts.
        * tree-ssa-loop-niter.c (find_loop_niter): New function.
        (find_loop_niter_by_eval): Use tree_int_cst_lt.
        (num_ending_zeros): Moved to tree.c.
        * tree.h (num_ending_zeros): Declare.
        * tree.c (num_ending_zeros): Moved from tree.c.

2005-02-09  Richard Henderson  <rth@redhat.com>

        * builtins.c (DEF_BUILTIN): Add COND argument.
        * tree.h (DEF_BUILTIN): Likewise.
        * builtins.def (DEF_GCC_BUILTIN, DEF_LIB_BUILTIN, DEF_EXT_LIB_BUILTIN,
        DEF_C94_BUILTIN, DEF_C99_BUILTIN, DEF_C99_C90RES_BUILTIN): Update to
        match.
        (DEF_BUILTIN_STUB): New.
        (BUILT_IN_STACK_SAVE, BUILT_IN_STACK_RESTORE, BUILT_IN_INIT_TRAMPOLINE,
        BUILT_IN_ADJUST_TRAMPOLINE, BUILT_IN_NONLOCAL_GOTO,
        BUILT_IN_PROFILE_FUNC_ENTER, BUILT_IN_PROFILE_FUNC_EXIT): Use it.
        * c-common.c (DEF_BUILTIN): Add COND argument.
        * tree.c (local_define_builtin): New.
        (build_common_builtin_nodes): New.

2005-02-09  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (fold_strip_sign_ops): New function to simplify a
        floating point expression ignoring the sign of the result.
        (fold) <ABS_EXPR>: Use it to simplify fabs(x).
        (fold) <MULT_EXPR>: Use it to simplify x*x.
        * tree.h (fold_strip_sign_ops): Prototype here.
        * builtins.c (fold_builtin_copysign): Take an additional FNDECL
        argument.  Use fold_strip_sign_ops to simplify the first argument.
        (fold_builtin_pow):  Use fold_strip_sign_ops to simplify the
        first argument when the second argument is an even integer
        constant, but only with -funsafe_math_optimizations.
        (fold_builtin_1): Update call to fold_builtin_copysign.

2005-02-09  Ian Lance Taylor  <ian@airs.com>

        PR middle-end/19583
        * gimple-low.c (try_catch_may_fallthru): In EH_FILTER_EXPR case,
        just check whether EH_FILTER_FAILURE falls through.

2005-02-09  Andreas Krebbel  <krebbel1@de.ibm.com>

        * gcc/haifa-sched.c (schedule_block): Make queued sched group
        insns return to ready list in the next turn.

2005-02-09  Richard Guenther  <rguenth@gcc.gnu.org>

        PR middle-end/19402
        * builtins.def: New __builtin_powi[lf].
        * builtins.c (mathfn_built_in): Handle BUILT_IN_POWI.
        (expand_builtin_powi): New function.
        (expand_builtin): Dispatch to expand_builtin_powi.
        * libgcc2.h: Add prototypes for __builtin_powi[lf].
        * libgcc2.c: Add __builtin_powi[lf] implementation.
        * mklibgcc.in: Add __builtin_powi[lf] to lib2funcs.
        * optabs.h: Add powi_optab.
        * optabs.c (init_optabs): Initialize powi_optab.
        * doc/extend.texi: Document __builtin_powi[lf].

2005-02-09  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (vect_set_dump_settings): Check that dump_file
        exists.

2005-02-09  Richard Guenther  <rguenth@gcc.gnu.org>

        PR middle-end/19854
        * fold-const.c (try_move_mult_to_index): Remove redundant
        type argument.  Create ADDR_EXPR with correct type.
        (fold): Update callers of try_move_mult_to_index.  Convert
        result to the appropriate type.

2005-02-09  Roger Sayle  <roger@eyesopen.com>

        PR target/19597
        * config/avr/avr.c (default_rtx_costs): Delete.
        (avr_operand_rtx_cost): New function.
        (avr_rtx_costs): Completely rewrite.

2005-02-08  Hans-Peter Nilsson  <hp@axis.com>

        PR target/19806
        * config/cris/cris.c (in_code): New variable.
        (cris_output_addr_const): Now a static function, a wrapper for
        output_addr_const.
        (cris_asm_output_symbol_ref): New function, broken out SYMBOL_REF
        case from old cris_output_addr_const.
        (cris_asm_output_label_ref): Similar for LABEL_REF.
        (cris_output_addr_const_extra): Similar for UNSPEC.
        * config/cris/cris.h (OUTPUT_ADDR_CONST_EXTRA)
        (ASM_OUTPUT_SYMBOL_REF, ASM_OUTPUT_LABEL_REF): Define.
        * config/cris/cris-protos.h (cris_output_addr_const): Remove
        declaration.
        (cris_asm_output_symbol_ref, cris_output_addr_const_extra)
        (cris_asm_output_label_ref): Declare.

2005-02-08  Paolo Bonzini  <bonzini@gnu.org>

        PR preprocessor/19801
        * doc/cppinternals.texi (Conventions, Lexer, Files): Adjust
        filenames that changed when libcpp was moved to the toplevel.

2005-02-07  Roger Sayle  <roger@eyesopen.com>

        * simplify-rtx.c (simplify_relational_operation_1): Avoid creating
        zero extensions of BImode operands.  Call lowpart_subreg instead
        of gen_lowpart_common and gen_lowpart_SUBREG.

2005-02-07  Nathanael Nerode  <neroden@gcc.gnu.org>

        PR ada/19489
        * libada-mk.in: Use cc_for_cross_gnattools, not cc_set_by_configure.
        * configure.ac: Set cc_for_cross_gnattools.
        * configure: Regenerate.

2005-02-08  Alan Modra  <amodra@bigpond.net.au>

        PR target/19803
        * predict.c (PROB_VERY_UNLIKELY): Use 1% instead of 10%.

2005-02-07  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR debug/19327
        * dbxout.c (dbxout_symbol) <FUNCTION_DECL>: Skip inline instance
        of nested functions.

2005-02-07  Jonathan Wakely  <redi@gcc.gnu.org>

        * doc/extend.texi: Document deprecated extensions allowing
        static floating-point members to have initializers and allowing
        floating-point literals in integral constant expressions.

2005-02-07  Kazu Hirata  <kazu@cs.umass.edu>

        * cfgcleanup.c, df.h, diagnostic.c, rtl.c, tree-vectorizer.h,
        config/darwin7.h, config/mips/mips.c,
        config/rs6000/altivec.md, config/rs6000/darwin-tramp.asm:
        Update copyright.

        * cse.c: Update comments.

2005-02-07  Richard Guenther  <rguenth@gcc.gnu.org>

        PR middle-end/19775
        * builtins.c (fold_builtin_sqrt): Transform
        sqrt(pow(x,y)) to pow(fabs(x),y*0.5), not
        pow(x,y*0.5).

2005-02-07  Leehod Baruch  <leehod@il.ibm.com>
            Dorit Naishlos  <dorit@il.ibm.com>

        * doc/invoke.texi (ftree-vectorizer-verbose): New.
        * opts.c (OPT_ftree_vectorizer_verbose_): New case for switch.
        * common.opt (ftree-vectorizer-verbose): New Flag for the vectorizer
        was added.
        * tree.h (vect_set_verbosity_level): New extern function declaration
        added.
        * tree-vectorizer.h (verbosity_levels): New enum type.
        * tree-vectorizer.c (vect_debug_stats): Function removed.
        (vect_debug_details): Likewise.
        (vect_verbosity_level): Global variable was defined and initialized.
        (vect_dump): Global variable definition.
        (vect_print_dump_info): New function.
        (vect_set_dump_settings): New function.
        (vect_set_verbosity_level): New function.
        (vectorize_loops): Add call to vect_set_dump_settings.

        (slpeel_make_loop_iterate_ntimes): Dump condition was changed.
        (slpeel_tree_duplicate_loop_to_edge_cfg): Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.

        (vect_analyze_offset_expr): Call to vect_print_dump_info with
        appropriate verbosity level instead of call to vect_debug_details
        or vect_debug_stats.
        (vect_get_base_and_offset):
        (vect_create_addr_base_for_vector_ref):
        (get_vectype_for_scalar_type):
        (vect_create_data_ref_ptr):
        (vect_init_vector):
        (vect_get_vec_def_for_operand):
        (vect_finish_stmt_generation):
        (vectorizable_assignment):
        (vectorizable_operation):
        (vectorizable_store):
        (vectorizable_load):
        (vect_transform_stmt):
        (vect_update_ivs_after_vectorizer):
        (vect_do_peeling_for_loop_bound):
        (vect_update_inits_of_drs):
        (vect_do_peeling_for_alignment):
        (vect_transform_loop):
        (vect_is_simple_use):
        (vect_analyze_operations):
        (vect_is_simple_iv_evolution):
        (vect_analyze_scalar_cycles):
        (vect_analyze_data_ref_dependence):
        (vect_analyze_data_ref_dependences):
        (vect_compute_data_ref_alignment):
        (vect_enhance_data_refs_alignment):
        (vect_analyze_data_refs_alignment):
        (vect_analyze_data_ref_access):
        (vect_analyze_data_ref_accesses):
        (vect_analyze_pointer_ref_access):
        (vect_get_memtag_and_dr):
        (vect_analyze_data_refs):
        (vect_mark_relevant):
        (vect_stmt_relevant_p):
        (vect_mark_stmts_to_be_vectorized):
        (vect_can_advance_ivs_p):
        (vect_get_loop_niters):
        (vect_analyze_loop_form):
        (vect_analyze_loop):
        (vectorize_loops): Likewise.

        (vect_do_peeling_for_loop_bound): Dump format slightly changed.
        (vect_update_inits_of_drs):
        (vect_do_peeling_for_alignment):
        (vect_transform_loop):
        (vect_analyze_operations):
        (vect_analyze_scalar_cycles):
        (vect_analyze_data_ref_dependences):
        (vect_analyze_data_refs_alignment):
        (vect_analyze_data_ref_accesses):
        (vect_analyze_data_refs):
        (vect_mark_stmts_to_be_vectorized):
        (vect_get_loop_niters):
        (vect_analyze_loop_form):
        (vect_analyze_loop): Likewise.
        (vect_mark_stmts_to_be_vectorized): Add call to print_generic_expr.

2005-02-07  Richard Sandiford  <rsandifo@redhat.com>

        PR bootstrap/19796
        Revert:
        2005-01-26  Richard Sandiford  <rsandifo@redhat.com>
        * config/mips/iris6.h (ENDFILE_SPEC): Don't link in irix-csr.o if
        either -ffast-math or -funsafe-math-optimizations is in use.

        2005-01-24  Richard Sandiford  <rsandifo@redhat.com>
        * config/mips/irix-csr.c: New file.
        * config/mips/t-iris6 (irix-csr.o): New rule to build it.
        (EXTRA_MULTILIB_PARTS): Add irix-csr.o.
        * config/mips/iris6.h (ENDFILE_SPEC): Include it in n32 and n64
        executables.

2005-02-07  Alexandre Oliva  <aoliva@redhat.com>

        * config/mn10300/linux.h (LIB_SPEC, STARTFILE_SPEC): Remove
        redundant, incorrect definitions.

        * config/frv/frv.md ("tls_indirect_call"): Turn into libcall-like
        expand.
        ("*tls_indirect_call"): New, reference hard regs directly.
        * config/frv/frv.c (gen_inlined_tls_plt): Adjust.

2005-02-07  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/arm/rtems-elf.h (SUBTARGET_EXTRA_ASM_SPEC):
        Let !-mhard-float !-msoft-float imply -mfpu=softfpa.

2005-02-06  Roger Sayle  <roger@eyesopen.com>

        PR rtl-optimization/19800
        * simplify_rtx.c (simplify_relational_operation_1): Explicitly
        call gen_lowpart_common and gen_lowpart_SUBREG instead of calling
        gen_lowpart.

2005-02-07  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/m68k/t-rtems (MULTILIB_MATCHES): Let m528x match m5200.

2005-02-07  Joseph S. Myers  <joseph@codesourcery.com>

        PR other/17135
        * doc/invoke.texi: Correct documentation of -freorder-functions.

2005-02-06  Joseph S. Myers  <joseph@codesourcery.com>

        PR other/14402
        * doc/invoke.texi: Don't mention gccbug.

2005-02-06  Roger Sayle  <roger@eyesopen.com>
            Andrew Pinski  <pinskia@physics.uc.edu>
            Paolo Bonzini  <paolo.bonzini@lu.unisi.ch>

        * simplify-rtx.c (simplify_relational_operation_1): Simplify
        (ne:SI (zero_extract:SI FOO (const_int 1) BAR) (const_int 0))
        into just (zero_extract:SI FOO (const_int 1) BAR).

2005-02-06  Joseph S. Myers  <joseph@codesourcery.com>

        * doc/cpp.texi: Include gcc-common.texi.  Don't define gcctabopt
        macro locally.  Don't give last revision date.  Use GCC version
        number from gcc-common.texi.
        * doc/cppinternals.texi: Include gcc-common.texi.  Don't give last
        revision date.  Use GCC version number from gcc-common.texi.
        Describe being a library as current state rather than as 3.x
        history.
        * doc/gcc.texi: Remove last update date.
        * doc/gccint.texi: Likewise.  Update copyright dates.
        * doc/install.texi: Update copyright dates.

2005-02-06  Joseph S. Myers  <joseph@codesourcery.com>

        PR other/7549
        * doc/invoke.texi: Mention for each option included in -Wall that
        it is included in -Wall.
        * doc/gcc.texi: Update copyright and last modification date.

2005-02-06  Zdenek Dvorak  <dvorakz@suse.cz>

        * tree-ssa-loop-ivopts.c (rewrite_use_nonlinear_expr): Do not add
        unnecessary cast to original induction variable increments.

2005-02-06  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/18219
        * tree-ssa-loop-ivopts.c (get_computation_at): Produce computations
        in distributed form.

2005-02-06  Richard Sandiford  <rsandifo@redhat.com>

        * expmed.c (store_bit_field): Make the SUBREG code adjust bitnum.
        Set bitpos and offset later in the function.  Do nothing if the
        target is a register and if the bitfield lies completely outside
        that register.
        (extract_bit_field): Make the same SUBREG, bitpos and offset changes
        here.  Return an uninitialised register if the source value is stored
        in a register and the bitfield lies completely outside that register.

2005-02-06  Steven Bosscher  <stevenb@suse.de>

        * df.c (df_insn_refs_record): Use XEXP to get the operand of a USE,
        not SET_DEST.

2005-02-06  Marcin Dalecki  <martin@dalecki.de>

        * diagnostic.c (default_diagnostic_finalizer): Fix use of attribute.

2005-02-06  Geoffrey Keating  <geoffk@apple.com>

        * config.gcc (*-*-darwin*): Separate darwin7 and darwin8 configs.
        * config/darwin8.h: New.
        * config/darwin7.h: Update comment.

2005-02-03  Leehod Baruch  <leehod@il.ibm.com>
            Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.h (LOC): New type.
        (UNKNOWN_LOC, EXPR_LOC, LOC_FILE, LOC_LINE): New macros.
        (loop_line_number): New field in struct _loop_vec_info.
        (LOOP_VINFO_LOC, LOOP_LOC): New macros.

        * tree-vectorizer.c (input.h): Included.
        (find_loop_location): New function.
        (vect_debug_stats): Argument changed from loop to LOC. Computation of
        loop line number removed.
        (vect_debug_details): Likewise.
        (new_loop_vec_info): Initialize new field LOOP_VINFO_LOC.

        (slpeel_make_loop_iterate_ntimes): Call find_loop_location. Argument in
        call to vect_debug_details/stats changed from loop to loop_loc.
        (slpeel_tree_duplicate_loop_to_edge_cfg): Likewise.
        (slpeel_tree_peel_loop_to_edge): Likewise.

        (vect_analyze_offset_expr): Argument in call to vect_debug_details/stats
        changed from NULL to UNKNOWN_LOC.
        (vect_get_base_and_offset):
        (vect_create_addr_base_for_vector_ref):
        (get_vectype_for_scalar_type):
        (vect_create_data_ref_ptr):
        (vect_init_vector):
        (vect_get_vec_def_for_operand):
        (vect_finish_stmt_generation):
        (vectorizable_assignment):
        (vectorizable_operation):
        (vectorizable_store):
        (vectorizable_load):
        (vect_transform_stmt):
        (vect_update_ivs_after_vectorizer):
        (vect_do_peeling_for_loop_bound):
        (vect_do_peeling_for_alignment):
        (vect_transform_loop):
        (vect_is_simple_use):
        (vect_analyze_operations):
        (vect_is_simple_iv_evolution):
        (vect_analyze_scalar_cycles):
        (vect_analyze_data_ref_dependences):
        (vect_compute_data_ref_alignment):
        (vect_enhance_data_refs_alignment):
        (vect_analyze_data_ref_access):
        (vect_analyze_data_ref_accesses):
        (vect_analyze_pointer_ref_access):
        (vect_get_memtag_and_dr):
        (vect_analyze_data_refs):
        (vect_mark_relevant):
        (vect_stmt_relevant_p):
        (vect_mark_stmts_to_be_vectorized):
        (vect_can_advance_ivs_p):
        (vect_get_loop_niters):
        (vect_analyze_loop):
        (vectorize_loops): Likewise.

        (vectorizable_load): Argument in call to vect_debug_details/stats
        changed from loop to LOOP_LOC (loop_vinfo).
        (vect_transform_loop):
        (vect_analyze_operations):
        (vect_analyze_scalar_cycles):
        (vect_analyze_data_ref_dependence):
        (vect_enhance_data_refs_alignment):
        (vect_analyze_data_ref_accesses):
        (vect_analyze_pointer_ref_access):
        (vect_analyze_data_refs):
        (vect_analyze_loop): Likewise.

        (vect_analyze_loop_form): Argument in call to vect_debug_details/stats
        changed from loop to loop_loc.

        (vect_enhance_data_refs_alignment): Removed unused variable loop.

2005-02-03  Leehod Baruch  <leehod@il.ibm.com>
            Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (vect_analyze_data_ref_dependence): Function
        declaration added.
        (vect_analyze_data_ref_dependences): Likewise.

        (vect_is_simple_use): Argument changed from loop structure to
        loop_vect_info structure.
        (vect_can_advance_ivs_p): Likewise.
        (vect_create_index_for_vector_ref): Likewise.
        (vect_update_ivs_after_vectorizer): Likewise.
        (new_stmt_vec_info): Likewise.

        (new_loop_vec_info): Second argument in call to new_stmt_vec_info was
        changed from loop to loop_vinfo.
        (vect_create_data_ref_ptr): First argument in call to
        vect_create_index_for_vector_ref was changed from loop to loop_vinfo.
        (vectorizable_assignment): Second argument in call to vect_is_simple_use
        was changed from loop to loop_vinfo.
        (vectorizable_operation): Likewise.
        (vectorizable_store): Likewise.
        (vect_mark_stmts_to_be_vectorized): Likewise.
        (vect_do_peeling_for_loop_bound): First argument in call to
        vect_update_ivs_after_vectorizer was changed from loop to loop_vinfo.
        (vect_analyze_operations): Argument in call to vect_can_advance_ivs_p
        was changed from loop to loop_vinfo.
        (vect_analyze_data_ref_dependences): Third argument in call to
        vect_analyze_data_ref_dependence was changed from loop to loop_vinfo.

        (vect_create_index_for_vector_ref): Get the loop from loop_vinfo.
        (vect_create_data_ref_ptr): Likewise.
        (vect_init_vector): Likewise.
        (vect_get_vec_def_for_operand): Likewise.
        (vectorizable_assignment): Likewise.
        (vectorizable_operation): Likewise.
        (vectorizable_store): Likewise.
        (vectorizable_load): Likewise.
        (vect_update_ivs_after_vectorizer): Likewise.
        (vect_is_simple_use): Likewise.
        (vect_analyze_data_ref_dependence): Likewise.
        (vect_analyze_pointer_ref_access): Likewise.
        (vect_can_advance_ivs_p): Likewise.

        * tree-vectorizer.h: (_loop_vec_info): Definition and macros moved
        before _stmt_vec_info.
        (_stmt_vec_info): Loop field replaced by loop_vec_info.
        (STMT_VINFO_LOOP): Replaced with STMT_VINFO_LOOP_VINFO.
        (new_stmt_vec_info): Argument changed from loop structure to
        loop_vect_info structure

        (vect_analyze_data_ref_dependences): Unnecessary line was removed.
        (vect_analyze_offset_expr): Avoid 80 columns overflow.
        (vect_create_addr_base_for_vector_ref): Likewise.
        (vect_analyze_pointer_ref_access): Likewise.

2005-02-03  Andrew Pinski  <pinskia@physics.uc.edu>

        PR tree-opt/19768
        * tree-ssa-dse.c (fix_phi_uses): Update the occurs in abnormal
        phi flag if the phi is abnormal.

2005-02-03  Andrew Pinski  <pinskia@physics.uc.edu>

        PR tree-opt/19736
        * tree-ssa.c (replace_immediate_uses): Update the immediate_uses
        information for the new statement.

2005-02-03  Joseph S. Myers  <joseph@codesourcery.com>

        PR driver/19117
        * gcc.c (main): Include the target in -v output.

2005-02-03  Alexandre Oliva  <aoliva@redhat.com>

        * combine.c (simplify_comparison, case SIGN_EXTEND, ZERO_EXTEND):
        Do not drop the extend if we'd have to add a paradoxical subreg
        later.  Include optabs.h and insn-codes.h.
        * Makefile.in (combine.o): Depend on $(OPTABS_H).

2005-02-02  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/19405
        * real.h (REAL_MODE_FORMAT_COMPOSITE_P): New macro.
        * fold-const.c (const_binop): Avoid constant folding floating
        point operations in modes that use composite representations.
        * simplify-rtx.c (simplify_binary_operation): Likewise.

2005-02-02  Geoffrey Keating  <geoffk@apple.com>

        * config/rs6000/altivec.md (altivec_dst): Make the first operand
        a REG, not a MEM.
        (altivec_dstt): Likewise.
        (altivec_dstst): Likewise.
        (altivec_dststt): Likewise.
        * config/rs6000/rs6000.c (altivec_expand_dst_builtin): Adjust creation
        of first operand.

2005-02-03  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (slpeel_make_loop_iterate_ntimes): Copy
        EXPR_LOCUS from orig_cond to the new cond_stmt.
        (vect_finish_stmt_generation): Copy EXPR_LOCUS from stmt to
        the new vec_stmt.

2005-02-03  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (slpeel_make_loop_iterate_ntimes): Call
        standard_iv_increment_position. Remove call to bsi_next
        (no need to bump the iterator anymore).
        (vect_create_index_for_vector_ref): Call
        standard_iv_increment_position. Remove second function argument.
        (vect_finish_stmt_generation): Remove call to bsi_next
        (no need to bump the iterator anymore).
        (vect_create_data_ref_ptr): Remove second argument (bsi) in call
        to vect_create_index_for_vector_ref.

2005-02-03  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (vect_mark_stmts_to_be_vectorized): Check if
        phis are used out of the loop.

2005-02-03  Joseph S. Myers  <joseph@codesourcery.com>

        PR c/17807
        * c-decl.c (undef_nested_function): New variable.
        (pop_scope): Diagnose undefined nested functions.
        (finish_function): Don't attempt cgraph processing or genericizing
        if current top-level function contained an undefined nested
        function.  Reset undef_nested_function at the end of a top-level
        function.

2005-02-02  Zdenek Dvorak  <dvorakz@suse.cz>

        * tree.c (build_int_cst_type): Take sign of the value into account
        when deciding whether sign extend the value.

2005-02-02  Joseph S. Myers  <joseph@codesourcery.com>

        PR c/18502
        * gcc.c (cpp_unique_options): Remove %{trigraphs}.
        (cpp_options, cc1_options): Change %{std*&ansi} to
        %{std*&ansi&trigraphs}.

2005-02-02  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c: Update comments.

2005-02-02  Aldy Hernandez  <aldyh@redhat.com>

        * config/rs6000/rs6000.c (rs6000_spe_function_arg): Multi-reg
        arguments go on the stack.  Do not put complex doubles in odd/even
        pairs.

2005-02-02  Steven Bosscher  <stevenb@suse.de>

        * doc/invoke.texi: Update the options enabled at -O1, -O2,
        and -O3.  Update the documentation for -fgcse-sm, -fgcse-las,
        -ftree-pre, and -fthread-jumps.

2005-02-02  Richard Sandiford  <rsandifo@redhat.com>

        PR tree-optimization/19578
        * tree-flow.h (modified_noreturn_calls): Declare.
        (noreturn_call_p): Declare.
        * tree-flow-inline.h (noreturn_call_p): New function.
        (modify_stmt): Add modified noreturn calls to modified_noreturn_calls.
        * tree-cfg.c (modified_noreturn_calls): New variable.
        (cleanup_control_flow): Use noreturn_call_p.  Split basic blocks
        that contain a mid-block noreturn call.
        * tree-ssa.c (delete_tree_ssa): Clear modified_noreturn_calls.

2005-02-02  Kazu Hirata  <kazu@cs.umass.edu>

        * df.c (df_def_record_1, df_uses_record): Don't use
        DF_FOR_REGALLOC.
        * df.h (DF_FOR_REGALLOC): Remove.

2005-02-02  Joseph S. Myers  <joseph@codesourcery.com>

        PR c/19435
        * c-typeck.c (really_start_incremental_init): Reset
        constructor_max_index for arrays of incomplete type.

2005-02-02  Jeff Law  <law@redhat.com>

        * gcse.c (struct reg_set): Store the block index where the register
        was set rather than the setting insn.
        (record_one_set, compute_transp): Corresponding changes.
        (pre_insert_copy_insn): Do not call replace_one_set.
        (replace_one_set): Remove.

2005-02-02  Joseph S. Myers  <joseph@codesourcery.com>

        PR other/15514
        * doc/gcov.texi: Fix typo.

2005-02-01  Richard Henderson  <rth@redhat.com

        PR target/19680
        * config/i386/i386.h (MODES_TIEABLE_P): Use ix86_modes_tieable_p.
        * config/i386/i386.c (ix86_hard_regno_mode_ok): Change return
        type to bool.
        (ix86_tieable_integer_mode_p, ix86_modes_tieable_p): New.
        * config/i386/i386-protos.h: Update.

2005-02-01  Steven Bosscher  <stevenb@suse.de>

        PR tree-optimization/19217
        * tree-cfg.c (verify_expr): Use the data field to see if TP was
        seen inside a PHI node.  Do not do the ADDR_EXPR check if it was.
        (verify_stmts): Pass (void*)1 as data to verify_expr to signal
        that it is walking a PHI node.

2005-02-01  Joseph S. Myers  <joseph@codesourcery.com>

        * doc/extend.texi (Nested Functions): Update.

2005-02-01  Richard Henderson  <rth@redhat.com>

        PR 19696
        * optabs.c (expand_copysign_absneg): Export.
        * optabs.h (expand_copysign_absneg): Declare.
        * config/rs6000/rs6000.md (copysigntf3): New.

2005-02-01  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19633
        * tree-flow.h (struct ptr_info_def): Add field 'pt_null'.
        * tree-ssa-alias.c (init_alias_info): Initialize.
        (merge_pointed_to_info): Set.
        (add_pointed_to_expr): Set pt_null if EXPR is a NULL pointer.
        (dump_points_to_info_for): Show value of pt_null.
        (struct count_ptr_d): Declare.
        (find_ptr_dereference): Remove.
        (ptr_is_dereferenced_by): Remove.
        (count_ptr_derefs): New local function.
        (count_uses_and_derefs): New local function.
        (compute_points_to_and_addr_escape): Call it.  If the number
        of dereferences is greater than zero, mark the pointer as
        dereferenced.  If there are fewer dereferences than uses of
        the pointer, the pointer's value escapes.

2005-02-01  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19670
        * tree-ssa.c (verify_ssa_name): Don't set TREE_VISITED
        here...
        (verify_use): ... set it here, instead.

2005-02-01  Janis Johnson  <janis187@us.ibm.com>

        * doc/sourcebuild.texi (Test directives): Fix formatting.

        * doc/sourcebuild.texi (Test directives): Describe selector
        expressions.

2005-02-01  Segher Boessenkool  <segher@kernel.crashing.org>

        * config.gcc (powerpc64-*-linux*): Default to -m64 also for
        specific 64-bit CPUs.

2005-02-01  Richard Earnshaw  <rearnsha@arm.com>

        PR target/16201
        * arm.c (arm_eliminable_register): New function.
        (adjacent_mem_locations): Don't allow eliminable registers.  Use
        HOST_WIDE_INT for address offsets.
        * arm-protos.h (arm_eliminable_register): Add prototype.

2005-02-01  Steven Bosscher  <stevenb@suse.de>

        PR optimization/15242
        * params.def (PARAM_MAX_GOTO_DUPLICATION_INSNS): New param.
        * basic-block.h (duplicate_computed_gotos): Add prototype.
        * bb-reorder.c (duplicate_computed_gotos): New function to
        duplicate sufficiently small blocks ending in a computed jump.
        * passes.c (rest_of_compilation): Call duplicate_computed_gotos
        if not optimizing for size.
        * cfgcleanup.c (try_crossjump_bb): If not optimizing for size,
        never do tail merging for blocks ending in a computed jump.
        * doc/invoke.texi: Document the max-goto-duplication-insns param.

2005-02-01  Eric Botcazou  <ebotcazou@libertysurf.fr>

        Patch from Richard Sandiford <rsandifo@redhat.com>
        * reload1.c (choose_reload_regs): Prevent the find_equiv_reg() code
        from inheriting a subreg equivalence with a non-spill register.

        * tree.h (DECL_FUNCTION_CODE): Document that it is overloaded.

2005-02-01  Alexandre Oliva  <aoliva@redhat.com>

        * config/frv/frv.c (movcc_fp_destination_operand): New.
        (gpr_or_memory_operand): Fix typo in comment.
        (gpr_or_memory_operand_with_scratch): New.
        * config/frv/frv.h (PREDICATE_CODES): Add the two new predicates.
        * config/frv/frv.md (movcc_fp, movcc_fp_internal): Use
        movcc_fp_destination_operand.
        (reload_incc_fp): Use gpr_or_memory_operand_with_scratch.
        Legitimize memory addresses using a scratch register.

2005-01-31  Jeff Law  <law@redhat.com>

        * tree-into-ssa.c (mark_def_sites_global_data): Make KILLS
        bitmap a sparse bitmap instead of a simple bitmap.
        (mark_def_sites_initialize_block):  Corresponding changes.
        (ssa_mark_def_sites_initialize_block): Likewise.
        (ssa_mark_phi_uses): Likewise.
        (mark_def_site, ssa_mark_def_sites): Likewise.
        (mark_def_site_blocks): Likewise.
        (rewrite_ssa_into_ssa): Likewise.

        * tree-ssa-dom.c (record_cond): Pass correct variable type
        for last argument to htab_find_slot_with_hash.

        * fold-const.c (fold, case CEIL_MOD_EXPR): Do not lose side
        effects when optimizing 0 % X.  Do not try to optimize X % 0.

2005-01-31  James E. Wilson  <wilson@specifixinc.com>

        * config/ia64/itanium1.md (1_scall bypass): Change 2_mmalua to
        1_mmalua.

2005-02-01  Eric Christopher  <echristo@redhat.com>

        * config/mips/mips.c (override_options): Warn if -mint64
        is used.
        * doc/invoke.texi (MIPS Options): Document that -mint64 is
        deprecated.

2005-02-01  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (cse_reg_info): Remove hash_next, next, regno.  Add
        timestamp.
        (cse_reg_info_list, cse_reg_info_list_free, REGHASH_SHIFT,
        REGHASH_SIZE, REGHASH_MASK, reg_hash, REGHASH_FN,
        cached_cse_reg_info, GET_CSE_REG_INFO): Remove.
        (cached_regno): Initialize to INVALID_REGNUM.
        (cse_reg_info_table_size,
        cse_reg_info_table_first_uninitialized,
        cse_reg_info_timestamp): New.
        (REG_TICK, REG_IN_TABLE, SUBREG_TICKED, REG_QTY): Use
        get_cse_reg_info.
        (init_cse_reg_info, get_cse_reg_info_1): New.
        (get_cse_reg_info): Cache the last look-up.
        (new_basic_block): Update the code to clear mappings from
        registers to cse_reg_info entries.
        (cse_main): Call init_cse_reg_info.

        * cse.c (get_cse_reg_info): Update a comment.

2005-01-31  Steven Bosscher  <stevenb@suse.de>

        PR c/19333
        * c-decl.c (start_decl): Do not warn about arrays of elements with
        an incomplete type here.
        (grokdeclarator): Do it here by making a pedwarn an error.
        * c-typeck.c (push_init_level): If there were previous errors with
        the constructor type, do not warn about braces for initializers.
        (process_init_element): Likewise for excess initializer elements.

2005-01-31  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (delete_trivially_dead_insn): Don't iterate.

2005-01-31  Andrew Pinski  <pinskia@physics.uc.edu>

        * config/rs6000/rs6000.md (copysignsf3): New expand.
        (copysigndf3): Likewise.

2005-01-31  Steven Bosscher  <stevenb@suse.de>

        * recog.c (constrain_operands): Only look for earlyclobber operand
        conflicts if an '&' constraint was seen.

2005-01-31  Marc Espie <espie@openbsd.org>

        * config.gcc: Don't include embedded systems fragment, switches default
        debugging format to ELF.
        * config/i386/openbsdelf.h: Add DBX_REGISTER_NUMBER since we no
        longer pick it up there.

2005-01-31  Dale Johannesen  <dalej@apple.com>

        * doc/extend.texi (nested functions): Fix linkage description.
        Clarify that static is not allowed.

2005-01-31  Dale Johannesen  <dalej@apple.com>

        * config/rs6000/darwin.md (movsf_low_di):  Make work.
        (movdf_low_di):  Make work.

2005-01-31  Dale Johannesen  <dalej@apple.com>

        * config/rs6000/darwin-tramp.asm (__trampoline_setup):
        Make work for 64 bit.

2005-01-31  Roger Sayle  <roger@eyesopen.com>
            Dale Johannesen  <dalej@apple.com>

        PR middle-end/19650
        * fold-const.c (fold_binary_op_with_conditional_arg):
        Make types match original operands, before STRIP_NOPS.

2005-01-31  Alan Modra  <amodra@bigpond.net.au>

        * config/rs6000/linux-unwind.h (struct gcc_vregs): New.
        (struct gcc_regs): Rename from gcc_pt_regs.  Add more regs.
        (struct gcc_sigcontext): Delete.  Merge contents to..
        (struct gcc_ucontext): ..here.
        (get_sigcontext): Delete.
        (get_regs): New function, like get_sigcontext but return regs ptr.
        64-bit version finds regs from r1 to support vdso.
        (ppc_linux_aux_vector): New function.
        (ppc_fallback_frame_state): Modify for get_regs.  Restore fprs
        and vector regs.

2005-01-31  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.c (vect_analyze_offset_expr): Use ssizetype instead
        sizetype.
        (vect_get_base_and_offset): Use ssizetype instead sizetype. Remove
        redundant fold. Fix misalignment for MINUS_EXPR.
        (vect_compute_data_ref_alignment): Use ssizetype instead sizetype.
        (vect_analyze_pointer_ref_access): Likewise.
        (vect_get_memtag_and_dr): Likewise.

2005-01-31  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (absnegsf2_mixed): Remove all of the # hackery.
        (absnegsf2_sse, absnegsf2_i387, absnegdf2_mixed, absnegdf2_sse,
        absnegdf2_i387, absnegxf2_i387): Likewise.

2005-01-31  Richard Henderson  <rth@redhat.com>

        PR 19696
        * optabs.c (expand_copysign_absneg): New.
        (expand_copysign_bit): Split out from ...
        (expand_copysign): ... here.  Use expand_copysign_absneg.

2005-01-30  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/19697
        * config/pa/pa.md (anddi3, iordi3): On HPPA64, disallow an integer
        constant as the second operand and a register as the third.

2005-01-31  Danny Smith  <dannysmith@users.sourceforge.net>

        PR target/19704
        * config/i386/i386.c (ix86_function_ok_for_sibcall):  Also check
        that dllimport'd functions do not use all call-clobbered registers
        to pass parameters.

2005-01-30  Richard Henderson  <rth@redhat.com>

        PR 19696
        * optabs.c (expand_absneg_bit): Split out from expand_unop and
        expand_abs_nojump and generalize.  Use operand_subword and
        emit_no_conflict_block.  Support large modes.
        (expand_abs_nojump): Use it.  Use HONOR_SIGNED_ZEROS to fall
        back to maximum.
        (expand_unop): Likewise.  Use HONOR_SIGNED_ZEROS to fall back
        negation to subtraction.
        (expand_copysign): Check that the format has signed zeros.
        Use operand_subword and emit_no_conflict_block.  Support large modes.

2005-01-30  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR tree-optimization/19624

        * Makefile.in (tree-ssa-pre.o): Add CFGLOOP_H.
        * tree-ssa-pre.c: Add cfgloop.h.
        Update comment.
        (pre_stats): New member, constified.
        (inserted_exprs): New static variable.
        (NECESSARY): New macro.
        (create_expression_by_pieces): Fold the expression, and
        mark it as defaulting to not necessary. Also put in
        inserted_exprs.
        (fully_constant_expression): New function.
        (insert_into_preds_of_block): Modify to not insert phis when we
        are playing with induction variables.
        Push phis onto the inserted_exprs vector, and mark them as not
        necessary by default.
        (insert_aux): Call fully_constant_expression on eprime.
        If all edges produce the same value, mark it constant.
        (mark_operand_necessary): New function.
        (remove_dead_inserted_code): New function.
        (init_pre): Init loop optimizer to get loop info.
        (fini_pre): Free loop_optimizer, and inserted_exprs vec.
        (execute_pre): Commit edge inserts, then remove dead code.

2005-01-30  Richard Henderson  <rth@redhat.com>

        * rtl.c (rtx_equal_p): No early exit for CONST_VECTOR.
        * varasm.c (const_rtx_hash_1): Handle CONST_VECTOR.

2005-01-30  Richard Henderson  <rth@redhat.com>

        PR target/19700
        * config/i386/i386.c (ix86_expand_copysign): New.
        (ix86_split_copysign_const): New.
        (ix86_split_copysign_var): Rename from ix86_split_copysign,
        rearrange op1/nmask operands.
        * config/i386/i386-protos.h: Update.
        * config/i386/i386.md (copysignsf3): Use ix86_expand_copysign.
        (copysigndf3): Likewise.
        (copysignsf3_const, copysigndf3_const): New.
        (copysignsf3_var): Rename from copysignsf3, split out splitter
        and fix split predicate for X constraint.
        (copysigndf3_var): Similarly.

2005-01-30  Kazu Hirata  <kazu@cs.umass.edu>

        * optabs.c, doc/c-tree.texi, doc/install.texi, doc/md.texi,
        doc/passes.texi, doc/rtl.texi, doc/sourcebuild.texi,
        doc/tm.texi, doc/tree-ssa.texi: Update copyright.

2005-01-29  Richard Henderson  <rth@redhat.com>

        PR target/19690
        * config/i386/i386.md (movdf_nointeger, movdf_integer): Fix ordering
        of # and * in constraints.

2005-01-29  Richard Henderson  <rth@redhat.com>

        PR middle-end/19689
        * expr.c (store_field): Don't strip sub-mode cast when the input
        data is even smaller.

2005-01-29  Richard Henderson  <rth@redhat.com>

        PR middle-end/19687
        * expr.c (categorize_ctor_elements_1): Check for CONSTRUCTOR of a
        union being empty.

2005-01-29  Richard Henderson  <rth@redhat.com>

        * combine.c (make_field_assignment): Fix argument order
        to gen_int_mode.

2005-01-29  Richard Guenther <richard.guenther@uni-tuebingen.de>

        PR tree-optimization/15791
        * fold-const.c (extract_array_ref): New function.
        (fold): Fold comparisons between &a[i] and &a[j] or
        semantically equivalent trees.

2005-01-29  Jeff Law  <law@redhat.com>

        * gcse.c (insert_expr_in_table): Revamp handling of available
        and anticipatable occurrence lists to avoid unnecessary list
        walking.
        (insert_set_in_table): Similarly.

2005-01-29  Joseph S. Myers  <joseph@codesourcery.com>

        * c-common.c (fix_string_type): Just use c_build_qualified_type to
        build string type.
        (c_build_qualified_type): Build qualified array types with
        TYPE_MAIN_VARIANT pointing to corresponding unqualified type.
        * c-decl.c (c_make_fname_decl): Build unqualified array type
        before qualified type.
        (grokdeclarator): Use TYPE_MAIN_VARIANT of typedef type if element
        type is qualified, not just if type itself is.  Don't apply
        qualifiers to array type when declarator is processed.  Apply
        qualifiers to field type whether or not it is an array type.
        Don't handle array types specially for applying qualifiers to
        variables.
        * c-typeck.c (composite_type): Build unqualified element type and
        array type when forming composite of array types.
        (common_pointer_type, comptypes, comp_target_types,
        type_lists_compatible_p, build_indirect_ref, build_array_ref,
        convert_for_assignment): Don't apply TYPE_MAIN_VARIANT to array
        types.
        (type_lists_compatible_p): Cache TREE_VALUE (args1) and TREE_VALUE
        (args2) in variables a1 and a2.

2005-01-29  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (n_elements_made, max_elements_made): Remove.
        (insert): Don't touch n_elements_made.
        (cse_main): Don't touch n_elements_made or max_elements_made.

2005-01-28  Stephane Carrez  <stcarrez@nerim.fr>

        PR target/15384
        * config/m68hc11/t-m68hc11-gas (dp-bit.c): Fix typo causing a
        configuration part of dp-bit.c to be lost.

2005-01-28  Roger Sayle  <roger@eyesopen.com>

        * expmed.c (expand_mult_highpart_optab): When attempting to use
        a non-widening multiplication in a wider mode, the operands need
        to be converted (zero or sign extended) to that mode.

2005-01-28  Ian Lance Taylor  <ian@airs.com>

        PR middle-end/16558
        PR middle-end/19583
        * gimple-low.c (block_may_fallthru): TRY_FINALLY_EXPR only falls
        through if both operands fall through.

2005-01-28  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (fold_rtx) <PC>: Don't optimize.

2005-01-28  Jeff Law  <law@redhat.com>

        * fold-const.c (fold, case CEIL_MOD_EXPR): Optimize 0 % X.
        (case FLOOR_MOD_EXPR, ROUND_MOD_EXPR, TRUNC_MOD_EXPR): Similarly.

2005-01-28  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (cse_reg_info_free_list, cse_reg_info_used_list,
        cse_reg_info_used_list_end): Remove.
        (cse_reg_info_list, cse_reg_info_list_free): New.
        (get_cse_reg_info): When allocating an instance of
        cse_reg_info, add it to the beginning of the cse_reg_info_list
        list.  Remove code to maintain cse_reg_info_used_list.
        (new_basic_block): Reset the free list to the beginning of
        cse_reg_info_list.

2005-01-28  Richard Sandiford  <rsandifo@redhat.com>

        * config/frv/frv.c (bdesc_2arg): Remove __MDPACKH.
        (frv_init_builtins): Change its prototype to take 4 uhalf arguments.
        (frv_expand_mdpackh_builtin): New function.
        (frv_expand_builtin): Use it to expand __MDPACKH.
        * doc/extend.texi (__MDPACKH): Update documentation.

2005-01-28  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.c (ix86_expand_fp_absneg_operator): Use
        SSE_FLOAT_MODE_P for use_sse computation.

2005-01-28  Ralf Corsepius  <ralf.corsepius@rtems.org>

        PR target/19663
        * config/sparc/rtemself.h (LINK_GCC_C_SEQUENCE_SPEC): undefine.

2005-01-27  Richard Henderson  <rth@redhat.com>

        * builtins.c (expand_builtin_copysign): New.
        (expand_builtin): Call it.
        * genopinit.c (optabs): Add copysign_optab.
        * optabs.c (init_optabs): Initialize it.
        (expand_copysign): New.
        * optabs.h (OTI_copysign, copysign_optab): New.
        (expand_copysign): Declare.

        * config/alpha/alpha.md (UNSPEC_COPYSIGN): New.
        (copysignsf3, ncopysignsf3, copysigndf3, ncopysigndf3): New.

        * config/i386/i386.c (ix86_build_signbit_mask): Split from ...
        (ix86_expand_fp_absneg_operator): ... here.
        (ix86_split_copysign): New.
        * config/i386/i386-protos.h: Update.
        * config/i386/i386.md (UNSPEC_COPYSIGN): New.
        (copysignsf3, copysigndf3): New.

        * config/ia64/ia64.md (UNSPEC_COPYSIGN): New.
        (copysignsf3, ncopysignsf3): New.
        (copysigndf3, ncopysigndf3): New.
        (copysignxf3, ncopysignxf3): New.
        * config/ia64/ia64.c (rtx_needs_barrier): Handle UNSPEC_COPYSIGN.

2005-01-27  Arend Bayer  <arend.bayer@web.de>
            Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c: (find_best_addr): Don't call copy_rtx before calling
        fold_rtx.  Save cost recomputation if fold_rtx did nothing.
        (fold_rtx) <ASM_OPERANDS>: Don't do anything if INSN is
        NULL_RTX.

2005-01-27  Jeff Law  <law@redhat.com>

        * tree-into-ssa.c (ssa_rewrite_initialize_block): Do not register
        definitions of SSA_NAMEs which are not being rewritten.
        (rewrite_ssa_into_ssa): Only initialize the current definition
        of an SSA_NAME if that SSA_NAME has been marked for rewriting.
        If checking is enabled, assert that SSA_NAME_AUX is clear for all
        SSA_NAMEs before returning.

2005-01-27  Kazu Hirata  <kazu@cs.umass.edu>

        * c-common.def, c-dump.c, c-gimplify.c, c-objc-common.c,
        cfgexpand.c, dbxout.c, function.h, opts.c, tree-flow-inline.h,
        tree-ssa-operands.h, tree-ssa-threadupdate.c, tree-tailcall.c,
        config/avr/avr.md, config/cris/aout.h, config/cris/cris.h,
        config/mips/iris6.h, config/sh/sh.c: Update copyright.

2005-01-27  Steven Bosscher  <stevenb@suse.de>

        PR middle-end/17278
        * opts.c (decode_options): Move flag_thread_jumps from -O1 and
        higher to -O2 and higher.  Likewise for tree PRE.
        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Only iterate at -O2
        and better.

2005-01-27  Ian Lance Taylor  <ian@airs.com>

        PR middle-end/19583
        * gimple-low.c (try_catch_may_fallthru): New static function.
        (block_may_fallthru): Handle TRY_CATCH_EXPR.
        * tree-inline.c (expand_call_inline): Don't warn about reaching
        the end of a non-void function being inlined if the function uses
        a return slot.

2005-01-27  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/i386.h (CALL_USED_REGISTERS): Fix comment pastos.

        PR c/18946
        * c-decl.c (warn_if_shadowing): Handle old_decl error_mark_node.
        (pushdecl): Only use DECL_FILE_SCOPE_P if DECL_P.
        (implicitly_declare): Handle error_mark_node.

2005-01-27  Richard Henderson  <rth@redhat.com>

        PR tree-opt/14329
        * tree.h (struct tree_decl): Add debug_expr_is_from.
        (DECL_DEBUG_EXPR_IS_FROM): New.
        (DECL_DEBUG_EXPR): Rename from DECL_DEBUG_ALIAS_OF.
        * dwarf2out.c (dwarf2out_var_location): Update to match.
        * tree-outof-ssa.c (create_temp): Likewise.
        * var-tracking.c (track_expr_p): Likewise.
        * tree-sra.c (instantiate_element): Set DECL_DEBUG_EXPR.
        * c-objc-common.c (c_tree_printer) <'D'>: Handle DECL_DEBUG_EXPR.
        * toplev.c (default_tree_printer): Likewise.

2005-01-27  Alexandre Oliva  <aoliva@redhat.com>

        * config/frv/frv.c (frv_class_likely_spilled_p): Add GR8_REGS,
        GR9_REGS, GR89_REGS, FDPIC_FPTR_REGS, FDPIC_REGS.

2005-01-27  Steven Bosscher  <stevenb@suse.de>

        * tree.h (SWITCH_COND, SWITCH_BODY, SWITCH_LABELS, CASE_LOW,
        CASE_HIGH, CASE_LABEL, ASM_STRING, ASM_OUTPUTS, ASM_INPUTS,
        ASM_CLOBBERS): Add tree checks.

        * c-common.h (SWITCH_TYPE): Rename to SWITCH_STMT_TYPE.
        (SWITCH_STMT_COND, SWITCH_STMT_BODY): New.
        * c-common.def (SWITCH_STMT): Update to match.
        * c-common.c (c_do_switch_warnings): Use SWITCH_STMT accessor
        macros instead of SWITCH_EXPR ones.
        * c-dump.c (c_dump_tree): Likewise.
        * c-gimplify.c (gimplify_switch_stmt): Likewise.
        * c-typeck.c (c_start_case, do_case, c_finish_case): Likewise.

        * doc/c-tree.texi (SWITCH_STMT): Update accessor macro names.

2005-01-27  Alan Modra  <amodra@bigpond.net.au>

        * unwind-dw2.c (execute_stack_op): Add missing cases for
        DW_OP_shl, DW_OP_shr, DW_OP_shra, DW_OP_xor.

2005-01-27  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config.gcc (Obsolete configurations): Remove 'dummy', add
        sparclite-*-coff*, sparclite-*-elf*, sparc86x-*-elf* and
        sparc-*-openbsd*.

2005-01-26  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19633
        * tree-ssa-alias.c (ptr_is_dereferenced_by): Also handle
        CALL_EXPRs.
        (maybe_create_global_var): Do not create .GLOBAL_VAR if there
        are no call-clobbered variables.
        * tree-outof-ssa.c (check_replaceable): Return false for calls
        with side-effects.

2005-01-26  Ulrich Weigand  <uweigand@de.ibm.com>

        * dbxout.c (dbxout_symbol_location): Resolve constant pool references
        even for variables with NULL DECL_INITIAL.

2005-01-26  Stuart Hastings  <stuart@apple.com>

        * gimplify.c (shortcut_cond_expr): Re-compute side-effects.

2005-01-26  Richard Henderson  <rth@redhat.com>

        PR middle-end/18008
        * c-decl.c (finish_struct): Set DECL_MODE after resetting a
        field's type.
        * expr.c (store_field): Strip conversions to odd-bit-sized types
        if the destination field width matches.

2005-01-26  Richard Henderson  <rth@redhat.com>

        * c-decl.c, expmed.c, expr.c: Revert last change.

2005-01-26  Richard Henderson  <rth@redhat.com>

        PR middle-end/18008
        * c-decl.c (finish_struct): Set DECL_MODE after resetting a
        field's type.
        * expmed.c (store_fixed_bit_field): Create a paradoxical subreg
        if we don't need the bits above those present in the current mode.
        * expr.c (store_field): Strip conversions to odd-bit-sized types
        if the destination field width matches.

2005-01-26  Richard Sandiford  <rsandifo@redhat.com>

        * config/mips/iris6.h (ENDFILE_SPEC): Don't link in irix-csr.o if
        either -ffast-math or -funsafe-math-optimizations is in use.

2005-01-26  Marek Michalkiewicz  <marekm@amelek.gda.pl>

        PR target/19293
        PR target/19329
        * config/avr/avr.c (notice_update_cc): Only set condition code for
        ashrqi3 if shift count > 0.
        (out_shift_with_cnt): Handle shift count <= 0 as a no-op.
        (ashlqi3_out, ashlhi3_out, ashlsi3_out, ashrqi3_out, ashrhi3_out,
        ashrsi3_out, lshrqi3_out, lshrhi3_out, lshrsi3_out): Handle shift
        count <= 0 as a no-op, and shift count >= width by copying zero
        or sign bit to all bits of the result.
        * config/avr/avr.md (all shifts): Add alternatives for zero shift
        count, with attribute "length" set to 0 and "cc" set to "none".

2005-01-26  Aldy Hernandez  <aldyh@redhat.com>

        * doc/invoke.texi: Document -mTLS.

        * testsuite/gcc.target/frv/all-tls-global-dynamic.c: New.
        * testsuite/gcc.target/frv/all-tls-initial-exec.c: New.
        * testsuite/gcc.target/frv/all-tls-initial-exec-pic.c: New.
        * testsuite/gcc.target/frv/all-tls-local-dynamic.c: New.
        * testsuite/gcc.target/frv/all-tls-local-dynamic-plt.c: New.
        * testsuite/gcc.target/frv/all-tls-local-dynamic-plt-pic.c: New.
        * testsuite/gcc.target/frv/all-tls-local-exec.c: New.
        * testsuite/gcc.target/frv/all-tls-local-exec-TLS.c: New.

        * configure.ac: Check for a TLS capable gas.

        * configure: Regenerate.

2005-01-26  Richard Henderson  <rth@redhat.com>

        PR middle-end/18008
        * combine.c (make_field_assignment): Simplify store to zero_extract
        from a source with an overlapping mask.

2005-01-26  Aldy Hernandez  <aldyh@redhat.com>

        2004-11-11  Eric Christopher  <echristo@redhat.com>

        * config/frv/frv.md: Add fr400_integer automaton. Don't
        allow TYPE_MUL, TYPE_MACC, or TYPE_CUT to issue in parallel
        to TYPE_MACC.

2005-01-26  Steven Bosscher  <stevenb@suse.de>

        PR middle-end/16585
        * cfgbuild.c (make_edges): Do not clear or set
        current_function_has_computed_jump.
        * function.h (struct function): Remove the has_computed_jump field.
        (current_function_has_computed_jump): Do not define.
        * sched-rgn.c (is_cfg_nonregular): Return true if a basic block ends
        in a computed jump.  Ignore current_function_has_computed_jump.

2005-01-26  Richard Henderson  <rth@redhat.com>

        PR middle-end/19515
        * expr.c (categorize_ctor_elements): New argument p_must_clear.
        (categorize_ctor_elements_1): Likewise.  Detect a union that isn't
        fully initialized.
        (mostly_zeros_p): Update for new categorize_ctor_elements argument.
        * gimplify.c (gimplify_init_constructor): Likewise.  Only shove
        objects into static storage if they have more than one non-zero value.
        * tree.h (categorize_ctor_elements): Update decl.

2005-01-26  Steven Bosscher  <stevenb@suse.de>

        PR middle-end/19616
        * tree.h (CALL_EXPR_TAILCALL): Add comment.
        * calls.c (check_sibcall_argument_overlap_1): Revert the change
        to this function from 2004-07-10.
        * tree-tailcall.c (suitable_for_tail_opt_p): Do not consider the
        the current function for tail call optimizations if the address
        of one of it its arguments is taken.

2005-01-26  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (fold_rtx): Call equiv_constant only when necessary.

2005-01-26  Bernd Schmidt  <bernd.schmidt@analog.com>

        * function.c (expand_function_end): If current_function_calls_alloca,
        emit stack restore in a place that is reached when the function falls
        through at the end.

2005-01-26  Alexandre Oliva  <aoliva@redhat.com>

        * Makefile.in (../$(build_subdir)/fixincludes/fixincl): Add dummy
        rule to avoid matching inappropriate suffix rule.

2005-01-26  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/19241
        * tree-inline.c (copy_body_r): Do not walk subtrees after substituting.

2005-01-26  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.h (LIB_SPEC) <sim*>: Use -lsyslinux, not
        -lsyssim.  Wrap -lc -lsyssim in --start-group --end-group instead
        of doubling.
        (STARTFILE_SPEC): Add crti.o, before crtbegin.o.
        <sim*>: Always use crt1.o, regardless of N in simN.
        <!sim>: Drop support for -pg and -p variants; always use crt0.o.
        (ENDFILE_SPEC): Add crtn.o, after crtend.o.
        (CRT_CALL_STATIC_FUNCTION): Remove.
        * config/cris/aout.h (STARTFILE_SPEC): <!melinux && sim*>: Always
        use crt1.o, regardless of N in simN.
        <!sim>: Drop support for -pg and -p variants; always use crt0.o.
        (LIB_SPEC): Do not define; default to the one in config/cris/cris.h.
        (CRIS_CPP_SUBTARGET_SPEC) <melinux && !nostdinc>: Remove special
        case isystem setting.
        (MAX_OFILE_ALIGNMENT): Correct to 32, not 16.

2005-01-25  Ian Lance Taylor  <ian@airs.com>

        * gimple-low.c (block_may_fallthru): Correct handling of
        SWITCH_EXPR--may fall through if SWITCH_LABELS is NULL.

2005-01-26  Hans-Peter Nilsson  <hp@axis.com>

        * config/cris/cris.h (CPP_SPEC): Adjust the various mtune=
        handlers to match indentation; nested under the mtune=* handler.
        Similar for mcpu= and march=.

2005-01-25  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/mips/linux.h (LIB_SPEC): Remove -rpath-link.
        * config/mips/linux64.h (LIB_SPEC): Likewise.
        * config/mn10300/linux.h (LIB_SPEC): Likewise.
        * config/sh/linux.h (LIB_SPEC): Likewise.

2005-01-25  Aldy Hernandez  <aldyh@redhat.com>

        * config/frv/frv.c (frv_legitimize_tls_address): New.
        (TARGET_HAVE_TLS): Define.
        (FRV_SYMBOL_REF_TLS_P): Define.
        (frv_override_options): Handle new register classes.
        (frv_legitimate_address_p): Reject tls addresses.
        (frv_legitimize_address): Handle TLS addresses.
        (gen_inlined_tls_plt): New.
        (gen_tlsmoff): New.
        (frv_legitimize_tls_address): New.
        (unspec_got_name): Add TLS entries.
        (got12_operand): Add R_FRV_TLSMOFF12 case.
        (frv_emit_move): Fixup TLS addresses.
        (frv_emit_movsi): Legitimize TLS addresses.

        * config/frv/frv.h (MASK_BIG_TLS): New.
        (TARGET_BIG_TLS): New.
        (HAVE_AS_TLS): Define.
        (TARGET_SWITCHES): Add -mTLS and -mtls options.
        (enum reg_class): Add GR8_REGS, GR9_REGS, GR89_REGS.
        (REG_CLASS_NAMES): Same.
        (REG_CLASS_CONTENTS): Same.
        (CONSTRAINT_LEN): New.
        (REG_CLASS_FROM_CONSTRAINT): New.
        (PREDICATE_CODES): Add symbolic_operand.

        * config/frv/frv.md (define_constants): Add UNSPEC_GETTLSOFF,
        UNSPEC_TLS_LOAD_GOTTLSOFF12, UNSPEC_TLS_INDIRECT_CALL,
        UNSPEC_TLS_TLSDESC_LDD, UNSPEC_TLS_TLSDESC_LDD_AUX,
        UNSPEC_TLS_TLSOFF_LD, UNSPEC_TLS_LDDI, UNSPEC_TLSOFF_HILO,
        R_FRV_GOTTLSOFF_HI, R_FRV_GOTTLSOFF_LO, R_FRV_TLSMOFFHI,
        R_FRV_TLSMOFFLO, R_FRV_TLSMOFF12, R_FRV_TLSDESCHI,
        R_FRV_TLSDESCLO, R_FRV_GOTTLSDESCHI, R_FRV_GOTTLSDESCLO, GR8_REG,
        GR9_REG, GR14_REG, LRREG.
        (type): Add load_or_call attribute.
        ("load_or_call"): New reservation.
        ("call_gettlsoff"): New.
        ("tls_indirect_call"): New.
        ("tls_load_gottlsoff12"): New.
        ("tlsoff_hilo"): New.
        ("tls_tlsdesc_ldd"): New.
        ("tls_tlsoff_ld"): New.
        ("tls_lddi"): New.

        * config/frv/frv-protos.h (symbolic_operand): Protoize.

        2005-01-25  Alexandre Oliva  <aoliva@redhat.com>

        * config/frv/frv.h (ASM_OUTPUT_DWARF_DTPREL): Define.
        * config/frv/frv-protos.h (frv_output_dwarf_dtprel): Declare.
        * config/frv/frv.c (TLS_BIAS): Define.
        (frv_output_dwarf_dtprel): New.

2005-01-26  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/19579
        * ifcvt.c (noce_try_cmove_arith): If emitting instructions to set up
        both A and B, see if they don't clobber registers the other expr uses.

2005-01-25  J"orn Rennecke <joern.rennecke@st.com>

        * real.c (do_add): Initialize signalling and canonical members.

        * real.c (real_from_integer): Zero out destination.

2005-01-18  Jan Hubicka  <jh@suse.cz>

        PR tree-optimize/19337
        * tree-inline.c (initialize_inlined_parameters): Copy
        saved_static_chain_decl only.

2005-01-25  Richard Henderson  <rth@redhat.com>

        PR target/19556
        PR target/19584
        * config/i386/i386.c (x86_inter_unit_moves): Zero.
        (ix86_preferred_reload_class): Rewrite fp-constant section, with
        80387 enabled, to return a proper subclass.  Return the subset that
        overlaps with GENERAL_REGS for PLUS.
        * config/i386/i386.md (movsi_1, movdi_2): Set type to "mmx" for pxor.

2005-01-25  Richard Henderson  <rth@redhat.com>

        PR middle-end/19609
        * tree-complex.c (expand_complex_div_wide): Use the correct formulae.

2005-01-25  Roger Sayle  <roger@eyesopen.com>

        * expmed.c (choose_multiplier): Change interface to return the
        multiplier lowpart as an rtx instead of an unsigned HOST_WIDE_INT.
        (expand_divmod): Update calls to choose_multiplier.

2005-01-24  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/19330
        * expmed.c (extract_bit_field): Use adjust_address instead of
        gen_lowpart when op0 is a MEM.

2005-01-24  Steven Bosscher  <stevenb@suse.de>

        * cfgexpand.c (expand_gimple_tailcall): Fix typo.

2005-01-24  Richard Sandiford  <rsandifo@redhat.com>

        * config/mips/irix-csr.c: New file.
        * config/mips/t-iris6 (irix-csr.o): New rule to build it.
        (EXTRA_MULTILIB_PARTS): Add irix-csr.o.
        * config/mips/iris6.h (ENDFILE_SPEC): Include it in n32 and n64
        executables.

2005-01-24  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR bootstrap/19364
        * config.gcc (sparc-*-elf*): Remove sol2.h, sparc/sol2.h and
        sparc/elf.h, add sparc/sp-elf.h.
        (sparc-*-rtems*): Likewise.
        (sparclite-*-elf*): Remove sol2.h, sparc/sol2.h, sparc/elf.h and
        tm-dwarf2.h, add sparc/sp-elf.h.
        (sparc86x-*-elf): Likewise.
        (sparc64-*-elf*): Remove sol2.h, sparc/sol2.h and tm-dwarf2.h.
        * config/sparc/liteelf.h (TARGET_SUB_OS_CPP_BUILTINS): Rename into
        TARGET_OS_CPP_BUILTINS.
        * config/sparc/sp86x-elf (TARGET_SUB_OS_CPP_BUILTINS): Likewise.
        * config/sparc/rtemself.h (TARGET_SUB_OS_CPP_BUILTINS): Likewise.
        Undefine it.
        * config/sparc/openbsd64.h (NO_IMPLICIT_EXTERN_C): Undefine.
        * config/sparc/sp64-elf.h (NO_IMPLICIT_EXTERN_C): New macro.
        (SWITCH_TAKES_ARG): Likewise.
        (LOCAL_LABEL_PREFIX): Likewise.
        (ASM_GENERATE_INTERNAL_LABEL): Likewise.
        (TARGET_N_FORMAT_TYPES): Delete.
        (TARGET_FORMAT_TYPES): Likewise.
        (ASM_DECLARE_FUNCTION_SIZE): Likewise.
        * config/sparc/elf.h: Delete.
        * config/sparc/sp-elf.h: New file.

2005-01-24  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-flow-inline.h (phi_arg_from_edge): Remove.
        * tree-flow.h: Remove the corresponding prototype.
        * tree-ssa-operands.h, tree-ssa-threadupdate.c, tree-ssa.c,
        tree-vectorizer.c: Use dest_idx instead of phi_arg_from_edge.

2005-01-24  Jakub Jelinek  <jakub@redhat.com>

        PR target/17751
        * config/rs6000/rs6000.c (rs6000_file_start): Create toc section
        for AIX ABI or ELF -fPIC.
        (rs6000_emit_load_toc_table): Don't create toc_section here.
        (rs6000_xcoff_file_start): Nor here.

2005-01-24  J"orn Rennecke <joern.rennecke@st.com>

        * sh.c (ra.h): Don't #include.
        (hard_regs_intersect_p): New function, resurrected from ra.c.

        * sh.c: Fix 1996 Copyright.

2005-01-24  Richard Henderson  <rth@redhat.com>
            Aldy Hernandez  <aldyh@redhat.com>

        * regrename.c (note_sets): Handle subregs.

2005-01-24  Joseph S. Myers  <joseph@codesourcery.com>

        PR bootstrap/18058
        * genconditions.c (write_header, write_conditions): Elide file if
        not GCC >= 3.0.1.

2005-01-24  Kazu Hirata  <kazu@cs.umass.edu>

        * c-opts.c, expmed.c, gengtype.c, tree-complex.c,
        config/arm/iwmmxt.md, config/avr/avr.c, config/s390/s390.h:
        Update copyright.

2005-01-24  Jakub Jelinek  <jakub@redhat.com>

        * builtins.c (get_pointer_alignment, gimplify_va_arg_expr,
        expand_builtin_printf, expand_builtin_fprintf,
        expand_builtin_sprintf): Use POINTER_TYPE_P instead TREE_CODE
        checking against POINTER_TYPE.
        (validate_arglist): Handle POINTER_TYPE code by checking
        POINTER_TYPE_P.

2005-01-24  Paolo Bonzini  <bonzini@gnu.org>

        * rtlanal.c (non_rtx_starting_operands, for_each_rtx_1,
        init_rtlanal): New.
        (for_each_rtx): Call for_each_rtx_1.
        * rtl.h (init_rtlanal): Declare.
        * toplev.c (backend_init): Call init_rtlanal.

2005-01-24  Jakub Jelinek  <jakub@redhat.com>

        * flow.c (propagate_one_insn): Formatting.

        PR middle-end/19551
        * flow.c (libcall_dead_p): Be more conservative if unsure.
        If there are any instructions between insn and call, see if they are
        all dead before saying the libcall is dead.

2005-01-24  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.md (*extendsfdf2_sse): Use "nonimmediate_operand"
        operand constraint for operand 0.

2005-01-23  Richard Henderson  <rth@redhat.com>

        PR 19486
        * tree-complex.c (expand_complex_div_wide): Set EDGE_FALLTHRU on
        edges leading to join block.

2005-01-23  Roger Sayle  <roger@eyesopen.com>

        * expmed.c (expand_mult_highpart): Make static.  Change type of
        constant multiplier argument from unsigned HOST_WIDE_INT to rtx.
        (expand_divmod): Updates calls to expand_mult_highpart by using
        gen_int_mode to pass a CONST_INT rtx.
        * rtl.h (expand_mult_highpart): Remove prototype.

2005-01-23  Kazu Hirata  <kazu@cs.umass.edu>

        * flow.c (regset_bytes, regset_size): Remove.

        * cfganal.c: Fix a reference to Harvey's paper.

2005-01-23  Steven Bosscher  <stevenb@suse.de>

        PR rtl-optimization/19464
        * tree-optimize.c (init_tree_optimization_passes): Add one more
        copyrename pass just before out-of-ssa.

2005-01-23  Joseph S. Myers  <joseph@codesourcery.com>

        PR bootstrap/18058
        * recog.c (recog_memoized): Don't define if GENERATOR_FILE.
        * ggc-none.c (ggc_free): Define.

2005-01-23  Kazu Hirata  <kazu@cs.umass.edu>

        * cse.c (max_reg, max_insn_uid): Remove.
        (cse_main): Don't access max_reg or max_insn_uid.

        * c-common.c (explicit_flag_signed_bitfields,
        lang_statement_code_p, lang_expand_function_end): Remove.
        * c-common.h: Remove the corresponding declarations.
        * c-opts.c (c_common_handle_option): Remove all write access
        to explicit_flag_signed_bitfields.

        * cgraph.c (cgraph_varpool_n_nodes): Remove.
        (cgraph_varpool_node): Don't access cgraph_varpool_n_nodes.
        * cgraph.h: Remove the corresponding declaration.

        * gcse.c (null_pointer_info): Remove.

2005-01-23  Roger Sayle  <roger@eyesopen.com>
            Eric Botcazou  <ebotcazou@libertysurf.fr>

        * combine.c (simplify_logical): Only simplify logical expressions
        of the form ior(and(x,y),z) by the inverse distributive law if the
        result is cheaper than the original.

2005-01-23  Kazu Hirata  <kazu@cs.umass.edu>

        * alias.c, c-common.h, c-incpath.c, c-incpath.h, expr.c,
        fold-const.c, gimplify.c, params.h, tree-data-ref.c,
        tree-if-conv.c, tree-nested.c, tree-outof-ssa.c,
        tree-ssa-dom.c, tree-vectorizer.c, tree.def, config/darwin.c,
        config/freebsd-spec.h, config/arm/arm.h,
        config/h8300/h8300.md, config/i386/i386.md,
        config/i386/predicates.md, config/i386/sse.md,
        config/ia64/ia64.c, config/ip2k/ip2k.c, config/s390/s390.c,
        config/vax/vax.md: Fix comment typos.  Follow spelling
        conventions.

2005-01-23  Steven Bosscher  <stevenb@suse.de>

        * gengtype.c (walk_type): Produce `not equal to' compares for loop
        tests, instead of `less than'.

2005-01-23  Richard Sandiford  <rsandifo@redhat.com>

        * function.c (assign_parm_setup_block): When creating a new stack slot
        for a parameter, get its alignment from the parameter's DECL_ALIGN
        rather than the type's TYPE_ALIGN.  Make sure that the parameter
        is at least word aligned.

2005-01-22  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/19378
        * config/avr/avr.c (avr_hard_regno_mode_ok): Rewrite.

2005-01-22  Richard Henderson  <rth@redhat.com>

        PR target/19506
        * config/i386/i386.md (movsfcc_1_sse_max): Use nonimmediate_operand
        in both compare operands.
        (movdfcc_1_sse_max): Likewise.
        (movsfcc_1_sse): Likewise.  Add earlyclobber for scratch.
        (movdfcc_1_sse): Likewise.
        * config/i386/i386.c (ix86_split_sse_movcc): Emit copies into the
        scratch register as needed.

2005-01-22  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.md (smaxsf3): Fix mnemonic typo.

        * config/i386/i386.c (ix86_prepare_fp_compare_args): Fix is_sse test.

2005-01-22  Richard Henderson  <rth@redhat.com>

        * genopinit.c (optabs): Use smin/smax for floating point too.
        * doc/md.texi: Update to match.  Clarify that floating point
        results are undefined for +0/-0 and NaN.
        * doc/rtl.texi: Likewise.
        * rtl.def (SMIN, SMAX): Likewise
        * tree.def (MIN_EXPR, MAX_EXPR): Likewise.

        * config/alpha/alpha.md (smaxdf3, smindf3, smaxsf3, sminsf3): Add
        leading 's' to the name.
        * config/ia64/ia64.md (smaxsf3, sminsf3, smaxdf3, smindf3,
        smaxxf3, sminxf3): Likewise.
        * config/rs6000/rs6000.md (smaxdf3, smindf3, smaxsf3, sminsf3):
        Likewise.

2005-01-22  Paul Brook  <paul@codesourcery.com>

        * config/arm/arm.md: Use "Uy" constraint for wcgr load/stores.

2005-01-21  Mark Dettinger  <dettinge@de.ibm.com>

        * config/s390/s390.c (struct processor_costs): New fields
        dlgr, dlr, dr, dsgfr, dsgr.
        (z900_cost, z990_cost): Values for new fields.
        (s390_rtx_costs): New cases MEM und COMPARE in switch
        statement. Modified handling of SIGN_EXTEND, ZERO_EXTEND,
        DIV, MOD, UDIV, UMOD.

2005-01-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/s390.md ("doloop_si64"): Reload input value directly
        into the register being decremented.
        ("doloop_si31", "doloop_di"): Likewise.
        ("*doloop_si_long"): Adapt pattern.

2005-01-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/s390.h (HARD_REGNO_NREGS): Fix computation for
        access registers.
        (CLASS_MAX_NREGS): Likewise.

2005-01-21  Daniel Berlin  <dberlin@dberlin.org>

        * doc/tree-ssa.texi (Statement Operands): Add example for new
        must-def macro. Note deprecation of old operands interface.

2005-01-22  Richard Sandiford  <rsandifo@redhat.com>

        PR tree-optimization/19484
        * tree-cfg.c (remove_fallthru_edge): New function.
        (cleanup_control_flow): Remove fallthru edges from calls that are
        now known not to return.

2005-01-20  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR tree-optimization/19038
        * tree-ssa-dom.c (cprop_operand): Don't replace loop invaeriant
        copies with loop variant ones.

2005-01-22  Kazu Hirata  <kazu@cs.umass.edu>

        * cfganal.c, real.h, reorg.c, timevar.def, tree-ssa-ccp.c,
        config/alpha/alpha-protos.h, config/alpha/alpha.h,
        config/alpha/alpha.md, config/alpha/predicates.md,
        config/sparc/freebsd.h, config/sparc/netbsd-elf.h,
        config/sparc/sol2.h: Update copyright.

        * tree-cfg.c (remove_forwarder_block_with_phi): Look at the
        first label to see if it is a nonlocal label.

2005-01-22  David Edelsohn  <edelsohn@gnu.org>
            Andrew Pinski  <pinskia@physics.uc.edu>

        PR target/19491
        * config/rs6000/rs6000.c (rs6000_va_start): Saturate n_gpr at
        maximum number of GPRs.  Saturate n_fpr at maximum number of FPRs.

2005-01-22  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/rs6000/rtems.h: Update copyright.

2005-01-22  Ralf Corsepius  <ralf.corsepius@rtems.org>

        PR target/19548
        * config/rs6000/rtems.h: Resurrect cpp_os_rtems_spec from gcc < 3.4.
        (CPP_OS_RTEMS_SPEC): New (From gcc-3.3's config/rs6000/sys4.h).
        (SUBSUBTARGET_EXTRA_SPECS): Use CPP_OS_RTEMS_SPEC.

2005-01-22  Volker Reichelt  <reichelt@igpm.rwth-aachen.de>

        PR c/18809
        * c-typeck.c (convert_arguments): Check for error_mark_node.

2005-01-21  Ian Lance Taylor  <ian@airs.com>

        PR tree-optimization/13000
        * tree-inline.c: Include "tree-flow.h".
        (expand_call_inline): If warn_return_type, warn if non-void inline
        function falls through.
        * tree-cfg.c (execute_warn_function_return): Don't warn about
        control reaching end if TREE_NO_WARNING is set.  Set
        TREE_NO_WARNING.
        * gimple-low.c (block_may_fallthru): Don't assume that SWITCH_EXPR
        has been lowered.
        * gimplify.c (shortcut_cond_expr): Don't emit a jump over the else
        branch if we don't need one.
        * c-typeck.c: Include "tree-flow.h"
        (c_finish_bc_stmt): Don't add a goto if the current statement
        list doesn't fall through to the current point.

2005-01-21  Roger Sayle  <roger@eyesopen.com>

        PR rtl-optimization/576
        * real.c (real_arithmetic): Change return type from void to bool
        to return an indication that the result may be inexact.
        * real.h (real_arithmeric): Update prototype.
        * fold-const.c (const_binop):  Don't constant fold floating
        point expressions when the user specifies -frounding-math and
        the result may depend upon the run-time rounding mode.
        (fold_convert_const_real_from_real): Clean-up.
        (fold_initializer): Ignore flag_rounding_math for initializers.
        * simplify-rtx.c (simplify_binary_operation): Likewise, don't
        constant fold FP operations with flag_rounding_math if the
        result may depend upon the run-time rounding mode.

2005-01-21  Tom Tromey  <tromey@redhat.com>

        * c-cppbuiltin.c (define__GNUC__): Correct assertion.

2005-01-21  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-cfg.c: Fix comment typos.

2005-01-21  J"orn Rennecke <joern.rennecke@st.com>

        * passes.c (rest_of_handle_flow2): Close / open the flow2 dump file
        around the call to rest_of_handle_branch_target_load_optimize.

2005-01-21  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config.gcc (sparc-*-netbsdelf*): Include dbxelf.h
        (sparc64-*-openbsd*): Likewise.
        (sparclite-*-elf*): Include tm-dwarf2.h.
        (sparc86x-*-elf*): Likewise.
        (sparc64-*-elf*): Likewise.
        * config/sparc/linux64.h (DWARF2_DEBUGGING_INFO): Delete.
        (DBX_DEBUGGING_INFO): Likewise.
        * config/sparc/liteelf.h (DWARF2_DEBUGGING_INFO): Likewise.
        (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config/sparc/netbsd-elf.h (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config/sparc/sp64-elf.h (DBX_DEBUGGING_INFO): Likewise.
        (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config/sparc/sp86x-elf.h (DWARF2_DEBUGGING_INFO): Likewise.
        (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config/sparc/sparc.h (DBX_DEBUGGING_INFO): Likewise.

2005-01-21  Hans-Peter Nilsson  <hp@bitrange.com>

        PR target/18701
        * combine.c (combine_simplify_rtx): Revert change of 2004-12-31.

2005-01-20  Paul Brook  <paul@codesourcery.com>

        * doc/rtl.texi: Document value extension requirements for CONST_INT.

2005-01-20  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-cfg.c (tree_verify_flow_info): Check that a nonlocal
        label is first in a sequence of labels.

        * tree-cfg.c (tree_verify_flow_info): Fix a typo.

2005-01-20  Janis Johnson  <janis187@us.ibm.com>
            Giovanni Bajo  <giovannibajo@gcc.gnu.org>

        * doc/sourcebuild.texi (Test Directives): New.

2005-01-20  Roger Sayle  <roger@eyesopen.com>

        * real.c (real_floor): Don't leave the result uninitialized when
        mode is VOIDMode, but return the unrounded intermediate value.
        (real_ceil): Likewise.

2005-01-20  Paul Brook  <paul@codesourcery.com>

        * config/arm/arm.md (insv): Use gen_int_mode.

2005-01-20  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config/sparc/freebsd.h (ASM_OUTPUT_INTERNAL_LABELREF): Delete.
        * config/sparc/linux.h (ASM_OUTPUT_INTERNAL_LABELREF): Likewise.
        * config/sparc/linux64.h (ASM_OUTPUT_INTERNAL_LABELREF): Likewise.
        * config/sparc/netbsd-elf.h (ASM_OUTPUT_INTERNAL_LABELREF): Likewise.
        * config/sparc/sol2.h (ASM_OUTPUT_INTERNAL_LABELREF): Likewise.

2005-01-20  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR debug/19124
        * dwarf2out.c (concat_loc_descriptor): We don't know we can use
        fbreg, so we have to assume we can't.
        (loc_descriptor_from_tree_1): Ditto.
        (containing_function_has_frame_base): New function.
        (add_location_or_const_value_attribute): Use it.
        Also try to generate a frame_base from a single element location
        list.

2005-01-20  Kazu Hirata  <kazu@cs.umass.edu>

        PR tree-optimization/15349
        * timevar.def (TV_TREE_MERGE_PHI): New.
        * tree-cfg.c (tree_forwarder_block_p): Add a new argument
        PHI_WANTED.
        (remove_forwarder_block, cleanup_forwarder_blocks): Adjust the
        calls to tree_forwarder_block_p.
        (remove_forwarder_block_with_phi, merge_phi_nodes,
        gate_merge_phi, pass_merge_phi): New.
        * tree-optimize.c (init_tree_optimization_passes): Add
        pass_merge_phi.
        * tree-pass.h: Add an extern for pass_merge_phi;

2005-01-20  Richard Henderson  <rth@redhat.com>

        PR target/19418
        * config/i386/emmintrin.h (_mm_castpd_ps, _mm_castpd_si128): New.
        (_mm_castps_pd, _mm_castps_si128): New.
        (_mm_castsi128_ps, _mm_castsi128_pd): New.

2005-01-20  Richard Henderson  <rth@redhat.com>

        PR target/19530
        * config/i386/mmintrin.h (_mm_cvtsi32_si64): Use
        __builtin_ia32_vec_init_v2si.
        (_mm_cvtsi64_si32): Use __builtin_ia32_vec_ext_v2si.
        * config/i386/i386.c (IX86_BUILTIN_VEC_EXT_V2SI): New.
        (ix86_init_mmx_sse_builtins): Create it.
        (ix86_expand_builtin): Expand it.
        (ix86_expand_vector_set): Handle V2SFmode and V2SImode.
        * config/i386/mmx.md (vec_extractv2sf_0, vec_extractv2sf_1): New.
        (vec_extractv2si_0, vec_extractv2si_1): New.

2005-01-20  Richard Henderson  <rth@redhat.com>

        PR target/16533
        * config/i386/i386.c (ix86_expand_push): New.
        * config/i386/mmx.md (push<MMXMODE>1): New.
        * config/i386/sse.md (push<SSEMODE>1): New.
        * config/i386/i386-protos.h: Update.

2005-01-20  Kazu Hirata  <kazu@cs.umass.edu>

        * params.def, params.h, predict.c, tree-ssa-loop-im.c: Update
        copyright.

2005-01-20  Richard Henderson  <rth@redhat.com>

        * rtl.def (CONST_VECTOR): Use RTX_CONST_OBJ.
        * rtl.h (CONSTANT_P): Don't special case CONST_VECTOR.

2005-01-19  Richard Henderson  <rth@redhat.com>

        PR target/19350
        * config/i386/i386.c (ix86_expand_vector_move_misalign): Convert
        to V4SFmode in SSE1 fallback load path.

2005-01-19  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_expand_vector_init_one_var): Fix typo
        in QImode expansion to ix86_expand_vector_set.
        (ix86_expand_vector_init_general): Fix typo in V8HImode recursive call.

2005-01-19  Richard Henderson  <rth@redhat.com>

        PR target/19511
        * config/i386/i386.c (ix86_preferred_reload_class): Return a proper
        subclass of the input class.
        (ix86_secondary_memory_needed): Always true for cross-MMX classes.
        Always true for cross-SSE1 classes.  Rationalize conditionals.
        * config/i386/i386.h (SSE_CLASS_P, MMX_CLASS_P): Use straight equality.
        * config/i386/i386.md (movsi_1): Add MMX/SSE zeros.  Fix alternatives
        for SSE1.  Don't check TARGET_INTER_UNIT_MOVES.
        (movdi_2): Add MMX/SSE zeros.
        (movdi_1_rex64): Likewise.  Don't check TARGET_INTER_UNIT_MOVES.
        (movsf_1): Don't check TARGET_INTER_UNIT_MOVES.
        (zero_extendsidi2_32, zero_extendsidi2_rex64): Likewise.
        (movsi_1_nointernunit, movdi_1_rex64_nointerunit): Remove.
        (movsf_1_nointerunit, zero_extendsidi2_32_1): Remove.
        (zero_extendsidi2_rex64_1): Remove.
        (MOV0 peephole): Check GENERAL_REG_P.

2005-01-19  Richard Henderson  <rth@redhat.com>

        PR target/19427
        * config/i386/i386.c (ix86_expand_vector_set): Fix third and fourth
        shufps elements.
        (ix86_expand_vector_extract): Likewise.

2005-01-19  Richard Henderson  <rth@redhat.com>

        PR middle-end/19304
        * expr.c (emit_move_change_mode): New argument force; use
        simplify_gen_subreg if true.
        (emit_move_via_alt_mode): Merge into ...
        (emit_move_via_integer): ... here.
        (emit_move_ccmode): Use emit_move_change_mode directly.

2005-01-19  Richard Henderson  <rth@redhat.com>

        PR target/19518
        * config/alpha/alpha.c (alpha_rtx_costs): Handle HIGH.
        (alpha_preferred_reload_class): Handle CONST_VECTOR.
        (alpha_emit_set_const_1): Add no_output parameter; don't emit
        rtl if true.
        (alpha_emit_set_const): Likewise.  Make static.
        (alpha_emit_set_long_const): Make static.
        (alpha_extract_integer): Split out from alpha_expand_mov.
        (alpha_split_const_mov): Likewise.
        (alpha_expand_mov): Use them.  Handle CONST_VECTOR.
        (alpha_legitimate_constant_p): New.
        * config/alpha/alpha-protos.h: Update.
        * config/alpha/alpha.h (REGISTER_MOVE_COST): Correct fp<->gp cost.
        (LEGITIMATE_CONSTANT_P): Re-implement with a function.
        * config/alpha/alpha.md (movsi): Add n alternative.
        (movsi_nt_vms, movdi_er_nofix, movdi_er_fix, movdi_fix): Likewise.
        (mov<VEC>_fix, mov<VEC>_nofix): Add i alternative.
        (splitters for all of the above): Use alpha_split_const_mov.
        * config/alpha/predicates.md (non_add_const_operand): New.
        (non_zero_const_operand): New.
        (input_operand): Use alpha_legitimate_constant_p after reload.

2005-01-19  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/19038
        * tree-ssa-loop-ivopts.c (allow_ip_end_pos_p): New function.
        (add_candidate): Add ivs with increment in latch only if
        allow_ip_end_pos_p is true.
        (determine_iv_cost): Use empty_block_p.

2005-01-19  Daniel Berlin  <dberlin@dberlin.org>

        * cfganal.c (compute_dominance_frontiers_1): Replace with new algorithm
        (compute_dominance_frontiers): Ditto.

2005-01-19  Ralf Corsepius  <ralf.corsepius@rtems.org>

        PR target/19529
        * config/sh/t-rtems: New.
        * config.gcc (sh-*-rtems*): Reflect having added config/sh/t-rtems.

2005-01-19  Zdenek Dvorak  <dvorakz@suse.cz>

        * tree-ssa-ccp.c (maybe_fold_offset_to_component_ref): Always subtract
        the offset of the selected field.

2005-01-19  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-cfg.c (remove_forwarder_block): Fix the check to
        prevent a nonlocal label from appearing in the middle of a
        basic block.

2005-01-19  Hans-Peter Nilsson  <hp@axis.com>

        PR rtl-optimization/19462
        * reorg.c (find_end_label): Create return insn only if
        current_function_epilogue_delay_list is empty.

2005-01-19  Paolo Bonzini  <bonzini@gnu.org>

        * doc/passes.texi: Remove paragraph mentioning new-ra.

2005-01-19  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/15139
        * combine.c: Include params.h.
        (count_rtxs): New function.
        (record_value_for_reg): If replace_rtx would replace at least
        2 occurrences of REG in VALUE and TEM is really large, replace REG with
        (clobber (const_int 0)) instead of TEM.
        * params.def (PARAM_MAX_LAST_VALUE_RTL): New.
        * params.h (MAX_LAST_VALUE_RTL): New.
        * Makefile.in (combine.o): Depend on $(PARAMS_H).
        * doc/invoke.texi (--param max-last-value-rtl=N): Document.

        PR c/17297
        * c-typeck.c (digest_init): Only call build_vector if all constructor
        elements are *_CST nodes.
        * gimplify.c (gimplify_init_constructor): Likewise.

        PR middle-end/19164
        * c-typeck.c (digest_init): Only call build_vector if inside_init
        is a CONSTRUCTOR.

2005-01-18  Tobias Schl"uter  <tobias.schlueter@physik.uni-muenchen.de>

        * toplev.c (init_asm_output): Remove dead #ifdef.

2005-01-18  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/linux.h (TARGET_C99_FUNCTIONS): Define.

2005-01-18  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * calls.c (expand_call): Check DECL_BUILT_IN_CLASS before
        accessing DECL_FUNCTION_CODE.
        * dojump.c (do_jump): Likewise.
        * gimplify.c (gimplify_call_expr): Likewise.
        * predict.c (expr_expected_value): Likewise.
        (strip_builtin_expect): Likewise.
        * tree-inline.c (estimate_num_insns_1): Likewise.
        * tree-ssa-loop-im.c (stmt_cost): Likewise
        * fold-const.c (fold): Test for BUILT_IN_NORMAL.
        (tree_expr_nonnegative_p): Likewise.

2005-01-18  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config/sparc/sparc.c (load_pic_register): Emit the appropriate
        variant of the load_pcrel_sym pattern.
        * config/sparc/sparc.md (P macro): Move to the top.
        (load_pcrel_sym): Macroize using P.
        (save_register_window): Likewise.

2005-01-18  Aldy Hernandez  <aldyh@redhat.com>

        * config/rs6000/rs6000.md ("sunordered"): Disable for e500.
        ("sordered"): Same.

2005-01-18  Andrew Pinski  <pinskia@physics.uc.edu>

        PR C/19472
        * c-typeck.c (build_asm_expr): Strip nops off
        input memory operands.

2005-01-18  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/aix43.h (CPLUSPLUS_CPP_SPEC): Delete
        _XOPEN_SOURCE, _XOPEN_SOURCE_EXTENDED, _LARGE_FILE_API.
        * config/rs6000/aix51.h (CPLUSPLUS_CPP_SPEC): Same.
        * config/rs6000/aix52.h (CPLUSPLUS_CPP_SPEC): Same.

2005-01-18  Joel Sherrill <joel.sherrill@oarcorp.com>

        PR target/19379
        * config/i386/i386.c (override_options): If the 80387 is disabled,
        then do not return FP values using FP registers.

2005-01-18  Kazu Hirata  <kazu@cs.umass.edu>

        * basic-block.h, c-common.c, c-cppbuiltin.c, c-lang.c,
        c-tree.h, cfgbuild.c, cgraph.c, cgraph.h, collect2.c,
        combine.c, config.gcc, coverage.h, cse.c, cselib.c,
        defaults.h, df.c, dwarf2asm.c, dwarf2out.c, explow.c, expr.c,
        flow.c, fold-const.c, gcse.c, ggc-page.c, gimple-low.c,
        gimplify.c, ifcvt.c, langhooks-def.h, lcm.c, optabs.h,
        output.h, postreload-gcse.c, postreload.c, recog.c,
        resource.c, rtl.def, rtlanal.c, sched-deps.c, sched-rgn.c,
        targhooks.h, toplev.c, tree-data-ref.c, tree-eh.c,
        tree-flow.h, tree-loop-linear.c, tree-mudflap.h, tree-nrv.c,
        tree-optimize.c, tree-outof-ssa.c, tree-pass.h,
        tree-scalar-evolution.c, tree-ssa-copy.c, tree-ssa-dce.c,
        tree-ssa-dse.c, tree-ssa-loop-ivopts.c, tree-ssa-operands.c,
        tree-ssa-pre.c, tree-ssa.c, tree-vectorizer.c, tree.def,
        unwind-dw2-fde-darwin.c, var-tracking.c: Update copyright.

        * config/darwin.c, config/darwin.h, config/freebsd-spec.h,
        config/alpha/alpha.c, config/arm/vfp.md,
        config/i386/emmintrin.h, config/i386/i386-modes.def,
        config/i386/i386-protos.h, config/i386/i386.h,
        config/i386/pmmintrin.h, config/i386/ppro.md,
        config/i386/predicates.md, config/i386/xmmintrin.h,
        config/i860/i860.c, config/ia64/ia64-modes.def,
        config/ia64/ia64-protos.h, config/ia64/ia64.h,
        config/ia64/ia64.md, config/ia64/itanium1.md,
        config/ia64/itanium2.md, config/ia64/predicates.md,
        config/iq2000/iq2000.h, config/mips/linux64.h,
        config/rs6000/aix41.h, config/rs6000/aix43.h,
        config/rs6000/aix52.h, config/rs6000/darwin-fallback.c,
        config/rs6000/rs6000.c, config/rs6000/rs6000.h,
        config/rs6000/spe.md, config/sh/sh.md, config/sparc/linux.h,
        config/sparc/linux64.h, config/sparc/litecoff.h,
        config/sparc/sp64-elf.h, config/sparc/sparc.c,
        config/sparc/sparc.h, config/sparc/sparc.md,
        config/sparc/sysv4-only.h: Update copyright.

2005-01-18  Richard Henderson  <rth@redhat.com>

        PR target/19496
        * config/i386/i386.c (ix86_expand_fp_movcc): Fail for LTGT and UNEQ.

2005-01-18  Marc Espie  <espie@openbsd.org>
        * config/i386/openbsdelf.h: Typo.

2005-01-18  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_expand_fp_movcc): Remove TARGET_IEEE_FP
        special case for sse.
        * config/i386/predicates.md (sse_comparison_operator): Likewise.

2005-01-18  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-inline.c (estimate_num_insns_1): Added cases for
        ALIGN_INDIRECT_REF, MISALIGNED_INDIRECT_REF, and REALIGN_LOAD_EXPR.

2005-01-18  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR rtl-optimization/19296
        * combine.c (simplify_comparison): Rewrite the condition under
        which a non-paradoxical SUBREG of a PLUS can be lifted when
        compared against a constant.

2005-01-18  Andi Kleen <ak@muc.de>

        * c-typeck.c: (convert_for_assignment): Check warn_pointer_sign.
        * c.opt (-Wpointer-sign): Add.
        * doc/invoke.texi: (-Wpointer-sign): Add.

2005-01-18  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.c (override_options): Revert 2004-11-24 change.
        * config/i386/i386.md (fmodsf3, dremsf3, *sinsf2, *cossf2, sincossf3,
        *tansf3_1, tansf2, atan2sf3_1, atan2sf3, atansf2, asinsf2, acossf2,
        logsf2, log10sf2, log2sf2, log1psf2, logbsf2, ilogbsf2, expsf2,
        exp10sf2, exp2sf2, expm1sf2, rintsf2, floorsf2, ceilsf2, btruncsf2,
        nearbyintsf2): Disable for TARGET_SSE_MATH.  Leave patterns enabled
        for TARGET_MIX_SSE_I387.
        (fmoddf3, dremdf3, *sindf2, *sinextendsfdf2, *cosdf2, *cosextendsfdf2,
        sincosdf3, *sincosextendsfdf3, *tandf3_1, tandf2, atan2df3_1,
        atan2df3, atandf2, asindf2, acosdf2, logdf2, log10df2, log2df2,
        log1pdf2, logbdf2, expdf2, exp10df2, exp2df2, expm1df2, rintdf2,
        floordf2, ceildf2, btruncdf2, nearbyintdf2): Disable for
        (TARGET_SSE2 && TARGET_SSE_MATH).  Leave patterns enabled for
        TARGET_MIX_SSE_I387.
        (atan2sf3, atan2df3, atan2xf3): Remove register constraints
        from expander.

2005-01-18  Uros Bizjak  <uros@kss-loka.si>

        PR target/19424
        * config/i386/mmx.md (*movv2sf_internal_rex64, *movv2sf_internal):
        Add movaps alternative for xmm reg->reg move.

2005-01-17  Jeff Law  <law@redhat.com>

        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Clear SSA_NAME_VALUE
        at the end of the main DOM loop rather than just before DOM exits.

2005-01-17  Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/19121
        * tree-ssa-alias.c (compute_flow_sensitive_aliasing): When
        adding aliases to a name tag, also add them to the pointer's
        type tag.
        * tree-ssa-copy.c (merge_alias_info): Do not merge flow
        sensitive alias info at all.  Only check that the two pointers
        have compatible pointed-to sets.
        * tree-ssa.c (verify_name_tags): Verify that the alias set of
        a pointer's type tag is a superset of the alias set of the
        pointer's name tag.

2005-01-17  James E Wilson  <wilson@specifixinc.com>

        PR target/19357
        * config/ia64/ia64.md (movxf): Handle general register source.  Adjust
        comment to document why.

2005-01-17  Richard Henderson  <rth@redhat.com>

        * config/i386/sse.md (smaxv4sf3_finite, sse_vmsmaxv4sf3_finite,
        sminv4sf3_finite, sse_vmsminv4sf3_finite, smaxv2df3_finite,
        sse2_vmsmaxv2df3_finite, sminv2df3_finite,
        sse2_vmsminv2df3_finite): New.
        (smaxv4sf3, sse_vmsmaxv4sf3, sminv4sf3, sse_vmsminv4sf3, smaxv2df3,
        sse2_vmsmaxv2df3, sminv2df3, sse2_vmsminv2df3): Remove commutative.
        Force op1 into register.

2005-01-17  Kelley Cook  <kcook@gcc.gnu.org>

        * Makefile.in (STAGEMOVESTUFF): Stage all the stamp files to prevent
        bubblestrap from always rebuilding build directory.

2005-01-17  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/s390.md ("*clc"): Remove incorrect '='.
        ("*cmpmem_short"): Likewise.

2005-01-17  Steven Bosscher  <stevenb@suse.de>

        * basic-block.h: Document BB_* flags.
        * regrename.c (copyprop_hardreg_forward): Don't use BB_VISITED,
        use an sbitmap instead.
        * sched-rgn.c (compute_trg_info): Likewise.

2005-01-17  Richard Sandiford  <rsandifo@redhat.com>

        * config.gcc (mips64*-*-linux*): Set the default abi to n32.  Remove
        redundant target_cpu_default and extra_parts lines.  Use the default
        "from-abi" ISA.
        * config/mips/linux64.h (DRIVER_DEFAULT_ABI_SELF_SPEC): Delete.
        (SUBTARGET_EXTRA_SPECS): Delete.
        (DRIVER_SELF_SPECS): Remove architecture lines.  Set the ABI directly.
        (SUBTARGET_ASM_SPEC): Remove -mabi=n32 and -mabi=64 mappings.
        * config/mips/t-linux64 (MULTILIB_DIRNAMES): Use "32" for -mabi=32
        and "n32" for -mabi=n32.

2005-01-17  Ian Lance Taylor  <ian@airs.com>

        PR c/5675
        * c-typeck.c (build_c_cast): Revert patch of 2003-02-16: don't
        fold constant variables into initial values.

2005-01-17  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-cfg.c (tree_can_merge_blocks_p): Reorder two checks.

        * tree-cfg.c (tree_forwarder_block_p): Speed up by walking
        through the statements backward.

2005-01-17  Ian Lance Taylor  <ian@airs.com>

        PR middle-end/13127:
        * tree-inline.c (expand_call_inline): Set TREE_NO_WARNING on
        a variable set to the return value of the inlined function.

2005-01-17  Mark Dettinger  <dettinge@de.ibm.com>

        * rtlanal.c (rtx_cost): Assign cost of 0 to a SUBREG
        when modes are tieable.

2005-01-17  Ranjit Mathew  <rmathew@hotmail.com>

        * gthr-posix.h (__gthread_active_p): Use pthread_cancel instead
        of pthread_create to find out if threads are enabled.
        * gthr-posix95.h (__gthread_active_p): Likewise.

2005-01-17  Paolo Bonzini  <bonzini@gnu.org>

        * common.opt (-fnew-ra): Remove.
        * ra*.*: Remove.
        * toplev.h (flag_new_regalloc): Remove.
        * Makefile.in (ra*.*): Don't mention.
        * passes.c (rest_of_handle_new_regalloc): Remove.
        (rest_of_handle_combine, rest_of_compilation): Always consider
        flag_new_regalloc as false.
        * doc/invoke.texi: Don't document -fnew-ra.

2005-01-17  Paolo Bonzini <bonzini@gnu.org>

        * bb-reorder.c (fix_edges_for_rarely_executed_code): Remove
        last parameter to reg_scan.
        * loop.c (loop_optimize): Likewise.
        * passes.c (rest_of_handle_tracer, rest_of_handle_if_conversion,
        rest_of_handle_web, rest_of_handle_cfg, rest_of_handle_jump_bypass,
        rest_of_handle_life, rest_of_handle_cse, rest_of_handle_cse2,
        rest_of_handle_gcse, rest_of_handle_loop_optimize,
        rest_of_handle_loop2, rest_of_handle_jump2): Likewise.
        * regclass.c (reg_scan): Likewise, for the declaration.
        * rtl.h (reg_scan): Likewise, for the prototype.

2005-01-17  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Don't call
        mark_dfs_back_edges.

2005-01-16  Daniel Berlin  <dberlin@dberlin.org>

        * tree-ssa-pre.c (add_to_sets): s1 may be NULL.
        (compute_avail): Uses don't go in tmp_gen.

2005-01-16  Steven Bosscher  <stevenb@suse.de>

        * ggc-page.c (ggc_alloc_stat): Use __builtin_ctzl instead of a
        loop to look for a free slot in a page entry.

2005-01-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/16304
        * defaults.h (TARGET_DEFERRED_OUTPUT_DEFS): Provide default.
        * toplev.c (compile_file): Call process_pending_assemble_output_defs
        just before targetm.asm_out.file_end.
        * tree.h (process_pending_assemble_output_defs): Declare.
        * varasm.c (assemble_output_def, process_pending_assemble_output_defs):
        New functions.
        (assemble_alias): Defer generation of assembly code for defines when
        TARGET_DEFERRED_OUTPUT_DEFS is true.
        * config/rs6000/aix41.h (TARGET_DEFERRED_OUTPUT_DEFS): Define.
        * config/rs6000/aix43.h (TARGET_DEFERRED_OUTPUT_DEFS): Define.
        * doc/tm.texi (TARGET_DEFERRED_OUTPUT_DEFS): document.

2005-01-15  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/19336
        * pa.c (pa_scalar_mode_supported_p): New function.
        (TARGET_SCALAR_MODE_SUPPORTED_P): Define.
        * pa.h (MIN_UNITS_PER_WORD): Add comment.

        * pa-protos.h (prefetch_operand): Delete.
        (prefetch_cc_operand, prefetch_nocc_operand): New declations.
        * pa.c (prefetch_operand): Delete.
        (prefetch_cc_operand, prefetch_nocc_operand): New functions.
        * pa.h (EXTRA_CONSTRAINT): Add `W' constraint.
        (PREDICATE_CODES): Delete prefetch_operand.  Add prefetch_cc_operand
        and prefetch_nocc_operand.
        * pa.md (prefetch): Rework to avoid reload problems handling short
        displacements when a cache control completer needs to be provided.
        (prefetch_32, prefetch_64): Delete.
        (prefetch_cc, prefetch_nocc): New patterns.

2005-01-15  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/aix52.h (CPLUSPLUS_CPP_SPEC): Revert previous change.

2005-01-15  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR ada/19388
        * pa.c (pa_asm_output_aligned_common): Warn if specified alignment
        exceeds maximum alignment for global common data.
        * pa64-hpux.h (MAX_OFILE_ALIGNMENT): Define to 32768.
        * som.h (MAX_OFILE_ALIGNMENT): Likewise.

2004-01-15  Roger Sayle  <roger@eyesopen.com>

        * tree-ssa-dom.c (extract_range_from_cond): Correct condition.

2004-01-15  Roger Sayle  <roger@eyesopen.com>

        * harg-reg-set.h (reg_class_names): Prototype global array.
        * regclass.c (reg_class_names): Declare here and initialize to
        REG_CLASS_NAMES.
        (dump_regclass): Remove local declaration of reg_class_names.
        (regclass): Likewise.
        * cfg.c (dump_flow_info): Likewise.
        * ra-debug.c (reg_class_names): Likewise.
        * regrename.c (reg_class_names): Likewise.
        * reload.c (reg_class_names): Likewise.
        * reload1.c (spill_failure): Likewise.
        * config/m68hc11/m68hc11.c (reg_class_names): Likewise.

2005-01-15  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/s390.md ("reload_outti"): Remove predicate for
        output operand.  Abort if operand is not a MEM.
        ("reload_outdi", "reload_outdf"): Likewise.

2005-01-15  Marc Espie  <espie@openbsd.org>

        * config.gcc (*-*-openbsd*): Set HAS_LIBC_R for OpenBSD <= 3.2.
        (i[34567]86-*-openbsd*): Switch to ELF for OpenBSD >= 3.4.
        * config/openbsd.h:  Fix C++ includes for native configurations.
        Add proper OS_CPP_BUILTINS.  Fix libspec for recent OpenBSD.
        Add trampoline support.
        * config/i386/openbsdelf.h: New.

2005-01-15  Marc Espie  <espie@openbsd.org>

        * collect2.c (main): Explicitly parse -dynamic-linker option.

2005-01-15  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/19060
        * tree-ssa-dom.c (extract_range_from_cond) <case LT_EXPR, GT_EXPR>:
        Return 0 if op1 <= TYPE_MIN_VALUE () resp. op1 >= TYPE_MAX_VALUE ().
        (simplify_cond_and_lookup_avail_expr): Add assert for dummy == 0
        and handle extract_range_from_cond returning false.
        * fold-const.c (fold): Optimize comparisons with min/max even for
        width > HOST_BITS_PER_WIDE_INT.

2005-01-15  Ralf Corsepius  <ralf.corsepius@rtems.org>

        * config/mips/rtems.h (MIPS_DEFAULT_GVALUE): Set to 0.
        * config/mips/t-rtems (MULTILIBS_DIRNAMES,MULTILIB_OPTIONS):
        Remove little endian multilib variants.
        Add mips32 multilib variant.

2005-01-15  Kazu Hirata  <kazu@cs.umass.edu>

        * explow.c (copy_all_reg, stabilize): Remove.
        * expr.h: Remove the corresponding prototypes.

        * rtlanal.c (regs_set_between_p): Remove.
        * rtl.h: Remove the corresponding prototype.

2005-01-14  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/rs6000.c (rs6k_nonimmediate_operand): Rename
        to rs6000_nonimmediate_operand.
        * config/rs6000/rs6000.h (PREDICATE_CODES): Rename
        rs6k_nonimmediate_operand to rs6000_nonimmediate_operand.
        * config/rs6000/rs6000.md (movsi_internal1): Rename predicate to
        rs6000_nonimmediate_operand.
        * config/rs6000/spe.md (movdf_e500_double): Rename predicate to
        rs6000_nonimmediate_operand.

2005-01-14  Andrew Pinski  <pinskia@physics.uc.edu>

        * tree-ssa-alias.c (pass_may_alias): Add TODO_verify_stmts.

2005-01-14  Aldy Hernandez  <aldyh@redhat.com>

        * config/rs6000/rs6000.h (CLASS_MAX_NREGS): DF goes in 1 register
        on e500v2.
        (CANNOT_CHANGE_MODE_CLASS): Restrict DI mode changes on e500v2.
        (PREDICATE_CODES): Add rs6k_nonimmediate_operand.

        * config/rs6000/rs6000.c (invalid_e500_subreg): New.
        (rs6k_nonimmediate_operand): New.
        (rs6000_legitimate_offset_address_p): Handle DI modes on e500v2
        correctly.
        (legitimate_lo_sum_address_p): Same.
        (rs6000_legitimize_address): Same.
        (rs6000_legitimize_reload_address): Same.
        (rs6000_legitimate_address): Same.
        (spe_build_register_parallel): Pass DF and DC modes in a DI
        register.

        * config/rs6000/rs6000.md ("*movsi_internal1"): Change predicate
        to rs6k_nonimmediate_operand.

        * config/rs6000/spe.md ("*frob_df_di"): New.
        ("*frob_di_df"): New.
        ("*frob_di_df_2"): New.
        ("*mov_sidf_e500_subreg0"): New.
        ("*mov_sidf_e500_subreg4"): New.
        ("*movdf_e500_double"): Change predicate to
        rs6k_nonimmediate_operand.

2005-01-14  Aldy Hernandez  <aldyh@redhat.com>

        * postreload.c (move2add_note_store): Only call
        trunc_int_for_mode on scalar integers.

2005-01-14  Steven Bosscher  <stevenb@suse.de>

        * tree-ssa-dce.c (visited_control_parents): New sbitmap to
        replace BB_VISITED uses.
        (find_obviously_necessary_stmts): Don't clear BB_VISITED.
        (propagate_necessity): Check the bitmap instead of BB_VISITED.
        (tree_dce_done): Free visited_control_parents.
        (perform_tree_ssa_dce): Allocate and clear it.
        * tree-ssa-pre.c (compute_antic_aux): Make non-recursive.
        (compute_antic): Iterate from here using a DFS.  Use an sbitmap
        instead of BB_VISITED.

2005-01-14  Kazu Hirata  <kazu@cs.umass.edu>

        * c-tree.h, coverage.h, langhooks-def.h, optabs.h, output.h,
        rtl.h, targhooks.h, tree-flow.h, tree-mudflap.h, tree.h:
        Remove unused prototypes.

2005-01-14  Aldy Hernandez  <aldyh@redhat.com>

        * config/rs6000/rs6000.c (rs6000_stack_info): Fix caching of SPE
        64-bit register usage.
        (spe_func_has_64bit_regs_p): Add FIXME note.

2005-01-14  Aldy Hernandez  <aldyh@redhat.com>

        * config/rs6000/rs6000.c (rs6000_generate_compare): Replace
        flag_finite_math_only with flag_unsafe_math_optimizations.

2005-01-14  J. D. Johnston  <jjohnst@us.ibm.com>

        * config/s390/tpf-unwind.h (s390_fallback_frame_state): Correct
        end-of-stack check.
        (__tpf_eh_return): Copy TPF private stack area from the module
        boundary stack frame.  Add check for when module addresses are
        equal, but no stub address is found.

2005-01-14  Richard Earnshaw  <rearnsha@arm.com>

        PR target/7525
        * arm.h (struct machine_function): Add call_via field.
        (thumb_call_via_label): Declare.
        * arm.c (thumb_call_via_label): New variable.
        (thumb_call_reg_needed): New variable.
        (arm_output_function_epilogue): For Thumb code, output any per-function
        call-indirect trampolines.
        (thumb_call_via_reg): New function.
        (arm_file_end): New function.
        (TARGET_ASM_FILE_END): Call arm_file_end.
        (aof_file_end): Likewise.
        * arm-protos.h (thumb_call_via_reg): Declare.
        * arm.md (call_reg_thumb, call_value_reg_thumb): Call
        thumb_call_via_reg in normal case.

2005-01-14  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/19084
        PR rtl-optimization/19348
        * recog.c (peephole2_optimize): Do global life update if some peephole
        decides it doesn't need at least one of its inputs and that change
        influences liveness at the start of the basic block.

        * basic-block.h (EXECUTE_IF_AND_COMPL_IN_REG_SET): Needs 2 REGSET
        arguments instead of 1.

2005-01-14  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR middle-end/18820
        * varasm.c (initializer_constant_valid_p) <ADDR_EXPR>: Return
        zero for nested functions needing a static chain or functions
        with a non-constant address.

2005-01-13  Roger Sayle  <roger@eyesopen.com>

        * simplify-rtx.c (simplify_binary_operation) <AND>: Optimize
        (and (sign_extend X) C) into (zero_extend (and X C)).

2005-01-13  David O'Brien  <obrien@FreeBSD.org>

        * config/freebsd-spec.h:  Make KSE pthread lib logic the default.

2005-01-13  Richard Henderson  <rth@redhat.com>

        PR target/19009
        PR target/19250
        PR target/19252
        * config/i386/i386.md (cmpdf, cmpsf, bunordered, bordered, buneq,
        bunge, bungt, bunle, bunlt, bltgt): Enable for TARGET_SSE_MATH,
        not just TARGET_SSE.
        (cmpfp_i_387): Rename from cmpfp_i.  Move after sse patterns.
        (cmpfp_i_mixed): Rename from cmpfp_i_sse; use for TARGET_MIX_SSE_I387.
        (cmpfp_i_sse): Rename from cmpfp_i_sse_only; use for TARGET_SSE_MATH.
        (cmpfp_iu_mixed, cmpfp_iu_sse, cmpfp_iu_387): Similarly.
        (fp_jcc_1_mixed, fp_jcc_1_sse, fp_jcc_1_387): Similarly.
        (fp_jcc_2_mixed, fp_jcc_2_sse, fp_jcc_2_387): Similarly.
        (fp_jcc_3_387, fp_jcc_4_387, fp_jcc_5_387, fp_jcc_6_387,
        fp_jcc_7_387, fp_jcc_8_387): Rename from fp_jcc_N.
        (movdicc_c_rex64): Rename with '*'.
        (movsfcc, movdfcc): Add checks for 387 and sse math to condition.
        (movsfcc_1_sse_min, movsfcc_1_sse_max, movsfcc_1_sse): New.
        (movsfcc_1_387): Rename from movsfcc_1.
        (movdfcc_1_sse_min, movdfcc_1_sse_max, movdfcc_1_sse): New.
        (movdfcc_1, movdfcc_1_rex64): Add check for 387.
        (sminsf3, smaxsf3, smindf3, smaxdf3): New.
        (minsf3, minsf, minsf_nonieee, minsf_sse, mindf3, mindf,
        mindf_nonieee, mindf_sse, maxsf3, maxsf, maxsf_nonieee, maxsf_sse,
        maxdf3, maxdf, maxdf_nonieee, maxdf_sse, sse_movsfcc, sse_movsfcc_eq,
        sse_movdfcc, sse_movdfcc_eq, sse_movsfcc_const0_1,
        sse_movsfcc_const0_2, sse_movsfcc_const0_3, sse_movsfcc_const0_4,
        sse_movdfcc_const0_1, sse_movdfcc_const0_2, sse_movdfcc_const0_3,
        sse_movdfcc_const0_4): Remove.
        * config/i386/i386.c (ix86_expand_fp_movcc): For TARGET_SSE_MATH,
        recognize min/max early.  Update for changed sse cmove patterns.
        (ix86_split_sse_movcc): New.
        * config/i386/i386-protos.h: Update.

2005-01-13  Steven Bosscher  <stevenb@suse.de>

        * tree-ssa-dse.c (fix_phi_uses): Use SSA operand iterators.
        (fix_stmt_v_may_defs): Likewise.

2005-01-13  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_expand_fp_absneg_operator): Use elt_mode
        for converting the mask.

2005-01-13  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/aix52.h (CPLUSPLUS_CPP_SPEC): Change _XOPEN_SOURCE
        definition to 600.

2005-01-13  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (IX86_BUILTIN_MOVQ, IX86_BUILTIN_LOADD,
        IX86_BUILTIN_STORED, IX86_BUILTIN_MOVQ2DQ,
        IX86_BUILTIN_MOVDQ2Q): Remove.
        (IX86_BUILTIN_VEC_EXT_V4SI): New.
        (ix86_init_mmx_sse_builtins, ix86_expand_builtin): Update to match.
        (ix86_expand_vector_extract): For V4S[FI], extract element 0 after
        shuffling.
        * config/i386/sse.md (sse_concatv2sf): Accept zero operand 2.
        (sse2_pextrw): Fix immediate constraint.
        (sse2_loadq, sse2_loadq_rex64): Remove.
        * config/i386/emmintrin.h (_mm_cvtsi128_si32, _mm_cvtsi128_si64x):
        Use __builtin_ia32_vec_ext_<size>.
        (_mm_cvtsi32_si128, _mm_cvtsi64x_si128): Use _mm_set_epi<size>.

2005-01-13  Aldy Hernandez  <aldyh@redhat.com>

        * function.c (assign_parm_setup_block): Look inside original
        entry_parm when inspecting PARALLEL.

2005-01-13  Ralf Corsepius  <ralf.corsepius@rtems.org>
            Joel Sherrill  <joel@oarcorp.com>

        PR target/19399
        * gthr-rtems.h (__gthread_recursive_mutex_t): New type.
        (__GTHREAD_RECURSIVE_MUTEX_INIT_FUNCTION): Define to
        rtems_gxx_recursive_mutex_init.
        (__gthread_recursive_mutex_lock): New function.
        (__gthread_recursive_mutex_trylock): Likewise.
        (__gthread_recursive_mutex_unlock): Likewise.

2005-01-13  Ralf Corsepius <ralf.corsepius@rtems.org>

        * config/i386/t-rtems-i386: Multilib on -mtune instead of -mcpu.

2005-01-13  Jan Beulich  <jbeulich@novell.com>

        * config/ia64/ia64.md (ashlti3, ashlti3_internal): New.
        (ashrti3_internal): Indicate output is early clobber. Generate result
        into output rather than first input. Use move for low word of output
        if shift count is exactly 64.
        (lshrti3_internal): Likewise.

2005-01-13  Hans-Peter Nilsson  <hp@bitrange.com>

        PR target/18329
        PR target/18330
        * reload1.c (delete_output_reload): Don't delete an output reload
        if the pseudo lives longer than a single basic block.  Adjust and
        improve wording of comment.

2005-01-12  Andrew Pinski  <pinskia@physics.uc.edu>

        PR target/19334
        * config/darwin.c (machopic_select_section): Use TYPE_SIZE_UNIT instead
        of TYPE_SIZE where we mean the number of bytes.

2005-01-12  Aldy Hernandez  <aldyh@redhat.com>

        * function.c (assign_parm_setup_block): Relax condition on
        multi-register optimization.

2005-01-12  Nick Clifton  <nickc@redhat.com>

        * config/sh/sh.md (udivsi3_sh2a, divsi3_sh2a): Give these patterns
        an "in_delay_slot" attribute of "no" to prevent them being used in
        delay slots.  This is forbidden because they might generate
        exceptions.

2005-01-12  Alan Modra  <amodra@bigpond.net.au>

        PR target/19389
        * config/rs6000/rs6000.md (movtf_internal): Replace r->o and m->r
        with r->Y and Y->r.

2005-01-12  Nick Clifton  <nickc@redhat.com>

        * config/iq2000/iq2000.h (ASM_SPEC): Undefine (to stop -Qy being
        passed on to GAS) but do not define, as GAS no longer supports or
        needs the -m2000 option.

2005-01-11  Roger Sayle  <roger@eyesopen.com>

        * builtins.c (fold_builtin_fabs): Convert argument to the appropriate
        type as args of unprototyped builtins aren't automatically promoted.
        (fold_builtin_abs): Likewise.

2005-01-11  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * Makefile.in: Set a `build-warn' variable.

2005-01-11  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/17949
        * tree-ssa-loop-ivopts.c (may_be_unaligned_p): New function.
        (find_interesting_uses_address): Use it.

2005-01-11  Aldy Hernandez  <aldyh@redhat.com>

        * regrename.c (kill_value): Handle subreg's that won't simplify.

2005-01-11  Richard Henderson  <rth@redhat.com>

        PR target/13366
        * config/i386/i386.h (enum ix86_builtins): Move ...
        * config/i386/i386.c: ... here.
        (IX86_BUILTIN_MOVDDUP, IX86_BUILTIN_MMX_ZERO, IX86_BUILTIN_PEXTRW,
        IX86_BUILTIN_PINSRW, IX86_BUILTIN_LOADAPS, IX86_BUILTIN_LOADSS,
        IX86_BUILTIN_STORESS, IX86_BUILTIN_SSE_ZERO, IX86_BUILTIN_PEXTRW128,
        IX86_BUILTIN_PINSRW128, IX86_BUILTIN_LOADAPD, IX86_BUILTIN_LOADSD,
        IX86_BUILTIN_STOREAPD, IX86_BUILTIN_STORESD,  IX86_BUILTIN_STOREHPD,
        IX86_BUILTIN_STORELPD, IX86_BUILTIN_SETPD1, IX86_BUILTIN_SETPD,
        IX86_BUILTIN_CLRPD, IX86_BUILTIN_LOADPD1, IX86_BUILTIN_LOADRPD,
        IX86_BUILTIN_STOREPD1, IX86_BUILTIN_STORERPD, IX86_BUILTIN_LOADDQA,
        IX86_BUILTIN_STOREDQA, IX86_BUILTIN_CLRTI,
        IX86_BUILTIN_LOADDDUP): Remove.
        (IX86_BUILTIN_VEC_INIT_V2SI, IX86_BUILTIN_VEC_INIT_V4HI,
        IX86_BUILTIN_VEC_INIT_V8QI, IX86_BUILTIN_VEC_EXT_V2DF,
        IX86_BUILTIN_VEC_EXT_V2DI, IX86_BUILTIN_VEC_EXT_V4SF,
        IX86_BUILTIN_VEC_EXT_V8HI, IX86_BUILTIN_VEC_EXT_V4HI,
        IX86_BUILTIN_VEC_SET_V8HI, IX86_BUILTIN_VEC_SET_V4HI): New.
        (ix86_init_builtins): Make static.
        (ix86_init_mmx_sse_builtins): Update for changed builtins.
        (ix86_expand_binop_builtin): Only use ix86_fixup_binary_operands
        if all the modes match.  Otherwise, fake it.
        (get_element_number, ix86_expand_vec_init_builtin,
        ix86_expand_vec_ext_builtin, ix86_expand_vec_set_builtin): New.
        (ix86_expand_builtin): Make static.  Update for changed builtins.
        (ix86_expand_vector_move_misalign): Use sse2_loadlpd with zero
        operand instead of sse2_loadsd.  Cast sse1 fallback to V4SFmode.
        (ix86_expand_vector_init_duplicate): New.
        (ix86_expand_vector_init_low_nonzero): New.
        (ix86_expand_vector_init_one_var, ix86_expand_vector_init_general):
        Split out from ix86_expand_vector_init; handle integer modes.
        (ix86_expand_vector_init): Use them.
        (ix86_expand_vector_set, ix86_expand_vector_extract): New.
        * config/i386/i386-protos.h: Update.
        * config/i386/predicates.md (reg_or_0_operand): New.
        * config/i386/mmx.md (mov<MMXMODEI>_internal): Add 'r' variants.
        (movv2sf_internal): Likewise.  And a splitter to match them all.
        (vec_dupv2sf, mmx_concatv2sf, vec_setv2sf, vec_extractv2sf,
        vec_initv2sf, vec_dupv4hi, vec_dupv2si, mmx_concatv2si, vec_setv2si,
        vec_extractv2si, vec_initv2si, vec_setv4hi, vec_extractv4hi,
        vec_initv4hi, vec_setv8qi, vec_extractv8qi, vec_initv8qi): New.
        (mmx_pinsrw): Fix operand ordering.
        * config/i386/sse.md (movv4sf splitter): Use direct pattern,
        rather than sse_loadss expander.
        (movv2df splitter): Similarly.
        (sse_loadss, sse_loadlss): Remove.
        (vec_dupv4sf, sse_concatv2sf, sse_concatv4sf, vec_extractv4sf_0): New.
        (vec_setv4sf, vec_setv2df): Use ix86_expand_vector_set.
        (vec_extractv4sf, vec_extractv2df): Use ix86_expand_vector_extract.
        (sse3_movddup): Rename with '*'.
        (sse3_movddup splitter): Use gen_rtx_REG instead of gen_lowpart.
        (sse2_loadsd): Remove.
        (vec_dupv2df_sse3): Rename from sse3_loadddup.
        (vec_dupv2df, vec_concatv2df_sse3, vec_concatv2df): New.
        (sse2_pinsrw): Fix argument ordering.
        (sse2_loadld, sse2_loadq): Add sse1 alternatives.
        (sse2_stored): Remove 'r' destination.
        (vec_dupv4si, vec_dupv2di, sse2_concatv2si, sse1_concatv2si,
        vec_concatv4si_1, vec_concatv2di, vec_setv2di, vec_extractv2di,
        vec_initv2di, vec_setv4si, vec_extractv4si, vec_initv4si,
        vec_setv8hi, vec_extractv8hi, vec_initv8hi, vec_setv16qi,
        vec_extractv16qi, vec_initv16qi): New.

        * config/i386/emmintrin.h (__m128i, __m128d): Use typedef, not define.
        (_mm_set_sd, _mm_set1_pd, _mm_setzero_pd, _mm_set_epi64x,
        _mm_set_epi32, _mm_set_epi16, _mm_set_epi8, _mm_setzero_si128): Use
        constructor form.
        (_mm_load_pd, _mm_store_pd): Use plain dereference.
        (_mm_load_si128, _mm_store_si128): Likewise.
        (_mm_load1_pd): Use _mm_set1_pd.
        (_mm_load_sd): Use _mm_set_sd.
        (_mm_store_sd, _mm_storeh_pd): Use __builtin_ia32_vec_ext_v2df.
        (_mm_store1_pd, _mm_storer_pd): Use _mm_store_pd.
        (_mm_set_epi64): Use _mm_set_epi64x.
        (_mm_set1_epi64x, _mm_set1_epi64, _mm_set1_epi32, _mm_set_epi16,
        _mm_set1_epi8, _mm_setr_epi64, _mm_setr_epi32, _mm_setr_epi16,
        _mm_setr_epi8): Use _mm_set_foo form.
        (_mm_loadl_epi64, _mm_movpi64_epi64, _mm_move_epi64): Use _mm_set_epi64.
        (_mm_storel_epi64, _mm_movepi64_pi64): Use __builtin_ia32_vec_ext_v2di.
        (_mm_extract_epi16): Use __builtin_ia32_vec_ext_v8hi.
        (_mm_insert_epi16): Use __builtin_ia32_vec_set_v8hi.
        * config/i386/mmintrin.h (_mm_setzero_si64): Use plain cast.
        (_mm_set_pi32): Use __builtin_ia32_vec_init_v2si.
        (_mm_set_pi16): Use __builtin_ia32_vec_init_v4hi.
        (_mm_set_pi8): Use __builtin_ia32_vec_init_v8qi.
        (_mm_set1_pi16, _mm_set1_pi8): Use _mm_set_piN variant.
        * config/i386/pmmintrin.h (_mm_loaddup_pd): Use _mm_load1_pd.
        (_mm_movedup_pd): Use _mm_shuffle_pd.
        * config/i386/xmmintrin.h (_mm_setzero_ps, _mm_set_ss,
        _mm_set1_ps, _mm_set_ps, _mm_setr_ps): Use constructor form.
        (_mm_cvtpi16_ps, _mm_cvtpu16_ps, _mm_cvtpi8_ps, _mm_cvtpu8_ps,
        _mm_cvtps_pi8, _mm_cvtpi32x2_ps): Avoid __builtin_ia32_mmx_zero;
        Use _mm_setzero_ps.
        (_mm_load_ss, _mm_load1_ps): Use _mm_set* form.
        (_mm_load_ps, _mm_loadr_ps): Use raw dereference.
        (_mm_store_ss): Use __builtin_ia32_vec_ext_v4sf.
        (_mm_store_ps): Use raw dereference.
        (_mm_store1_ps): Use _mm_storeu_ps.
        (_mm_storer_ps): Use _mm_store_ps.
        (_mm_extract_pi16): Use __builtin_ia32_vec_ext_v4hi.
        (_mm_insert_pi16): Use __builtin_ia32_vec_set_v4hi.

2005-01-11  Stan Shebs  <shebs@apple.com>

        * config/rs6000/rs6000.c (machopic_output_stub): Issue
        ldu instead of lwzu if 64-bit -mdynamic-no-pic.

2005-01-11  Andrew Pinski  <pinskia@physics.uc.edu>

        PR target/18761
        * config/rs6000/rs6000.c (rs6000_special_round_type_align):
        Skip all DECLs except for FIELD_DECLs.

2005-01-11  Andreas Krebbel  <krebbel1@de.ibm.com>

        * config/s390/s390.c (override_options): Return error if
        -mbackchain, -mpacked-stack and -mhard-float are used together.
        (s390_va_start): Remove the backchain && packed-stack special case.
        (s390_gimplify_va_arg): Likewise.
        * doc/invoke.texi: Remove the ABI incompatibility note.

2005-01-11  Andreas Krebbel  <krebbel1@de.ibm.com>

        * config/s390/s390.c (struct s390_frame_layout): Remove
        save_backchain_p.
        (s390_frame_info, s390_emit_prologue): Replace occurrences of
        save_backchain_p with TARGET_BACKCHAIN.

2005-01-11  Alan Modra  <amodra@bigpond.net.au>

        PR target/18916
        * builtins.c (std_gimplify_va_arg_expr): Adjust alignment of *ap.
        * expr.h (struct locate_and_pad_arg_data): Add "boundary".
        * function.c (locate_and_pad_parm): Set new field.
        (assign_parm_find_stack_rtl): Use it instead of FUNCTION_ARG_BOUNDARY.
        Tweak where_pad test to include "none".  Always set mem align for
        stack_parm.
        (assign_parm_adjust_stack_rtl): Discard stack_parm if alignment
        not sufficient for type.
        (assign_parm_setup_block): If stack_parm is zero on entry, always
        make a new stack local.  Block move old stack parm if necessary
        to new aligned stack local.
        (assign_parm_setup_stack): Use a block move to handle
        potentially misaligned entry_parm.
        (assign_parms_unsplit_complex): Specify required alignment when
        creating stack local.
        * calls.c (compute_argument_addresses): Override alignment of stack
        arg calculated from its type with the alignment given by
        FUNCTION_ARG_BOUNDARY.
        (store_one_arg): Likewise.

2005-01-11  Jan Beulich  <jbeulich@novell.com>

        * config/ia64/ia64.md (zero_extendsidi2): Replace zxt4 by addp4.
        Change respective itanium_class attribute to ialu.
        (shladdp4_internal): New.
        * config/ia64/predicates.md (shladd_log2_operand): New.

2005-01-11  Richard Henderson  <rth@redhat.com>

        * expr.c (store_constructor): Use rtvec_alloc instead of
        alloca+gen_rtvec_v, and an incorrect number passed to alloca.

2005-01-11  Kazu Hirata  <kazu@cs.umass.edu>

        * config/alpha/alpha.c, config/i386/mmx.md: Fix comment typos.

2005-01-11  Alan Modra  <amodra@bigpond.net.au>

        * varasm.c (default_section_type_flags_1): Don't set SECTION_SMALL.
        * config/ia64/ia64.c (TARGET_SECTION_TYPE_FLAGS): Define.
        (TARGET_RWRELOC): Define.
        (ia64_rwreloc_section_type_flags): Delete.
        (ia64_section_type_flags): New function.
        * config/ia64/hpux.h (TARGET_SECTION_TYPE_FLAGS): Don't define.
        (TARGET_RWRELOC): Define.

2005-01-10  David Mosberger  <davidm@hpl.hp.com>

        PR target/18987
        * config/ia64/ia64.c (process_set): For alloc insn, only call
        process_epilogue is !frame_pointer_needed.

2005-01-10  Roger Sayle  <roger@eyesopen.com>

        PR c++/19355
        * c-common.c (c_common_truthvalue_conversion): TRUTH_NOT_EXPR is a
        unary operator and can't be treated as a binary/comparison operator.

2005-01-10  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (ix86_function_value): Use type_natural_mode.
        (ix86_return_in_memory): Likewise.
        (function_arg_advance):  Likewise.  Mirror structure in function_arg
        for choosing register to advance.

2005-01-10  Kazu Hirata  <kazu@cs.umass.edu>

        * tree-vectorizer.c, tree.def: Fix comment typos.

2005-01-10  Mark Dettinger  <dettinge@de.ibm.com>

        * config/s390/s390.c (struct processor_costs): 4 new fields:
        ddbr, ddr, debr, der.
        (s390_rtx_costs): More precise handling of divide instructions.

2005-01-10  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/t-aix43 (BOOT_LDFLAGS): Define.

2005-01-10  Jan Beulich  <jbeulich@novell.com>

        * config/ia64/ia64.c (ia64_in_small_data_p): Also handle the section
        names resulting from -ffunction-sections/-fdata-sections and linkonce
        ones.
        * varasm.c (default_section_type_flags_1): Also set SECTION_SMALL
        based on the section name. Rearrange the section name comparison logic
        slightly so that each section name is compared against at most once.

2005-01-10  Ben Elliston  <bje@au.ibm.com>

        * doc/invoke.texi (Code Gen Options): Add PowerPC to the list of
        targets for which -fPIC reduces limitations on the GOT size.

2005-01-09  Falk Hueffner  <falk@debian.org>

        * fold-const.c (fold): Also handle EXACT_DIV_EXPR when folding
        X/C1 cmpop C2.

2005-01-09  David Edelsohn  <edelsohn@gnu.org>

        PR target/18720
        * collect2.c (main): Set aixrtl_flag for -brtl option.
        (resolve_lib_name): Search for .so file extension before .a
        if aixrtl_flag set.

2005-01-09  Dorit Naishlos  <dorit@il.ibm.com>

        * tree-vectorizer.c (vect_enhance_data_refs_alignment): Add dump prints.
        (vect_analyze_data_refs_alignment): Add dump prints.

2005-01-09  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.c (vect_analyze_offset_expr): Use
        expr_invariant_in_loop_p.
        Initialize outputs first thing in the function.
        (vect_update_ivs_after_vectorizer): Call initial_condition_in_loop_num.
        (vect_is_simple_iv_evolution): Call initial_condition_in_loop_num.
        (vect_analyze_pointer_ref_access): Check that the initial condition of
        the access function is loop invariant.

2005-01-09  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.c (bdesc_2arg): Update names for mmx_ prefixes.
        (ix86_expand_builtin): Likewise.  Frob MASKMOVQ wrt the input mem
        just like MASKMOVDQU.  Return plain zero for MMX_ZERO.
        * config/i386/i386.md (MMXMODEI, mov<MMXMODEI>,
        mov<MMXMODEI>_internal_rex64, mov<MMXMODEI>_internal, movv2sf,
        movv2sf_internal_rex64, movv2sf_internal, MMXMODE,
        movmisalign<MMXMODE>, mmx_pmovmskb, mmx_maskmovq, mmx_maskmovq_rex,
        sse_movntdi, addv8qi3, addv4hi3, addv2si3, mmx_adddi3, ssaddv8qi3,
        ssaddv4hi3, usaddv8qi3, usaddv4hi3, subv8qi3, subv4hi3, subv2si3,
        mmx_subdi3, sssubv8qi3, sssubv4hi3, ussubv8qi3, ussubv4hi3,
        mulv4hi3, smulv4hi3_highpart, umulv4hi3_highpart, mmx_pmaddwd,
        sse2_umulsidi3, mmx_iordi3, mmx_xordi3, mmx_anddi3, mmx_nanddi3,
        mmx_uavgv8qi3, mmx_uavgv4hi3, mmx_psadbw, mmx_pinsrw, mmx_pinsrw,
        mmx_pextrw, mmx_pshufw, eqv8qi3, eqv4hi3, eqv2si3, gtv8qi3, gtv4hi3,
        gtv2si3, umaxv8qi3, smaxv4hi3, uminv8qi3, sminv4hi3, ashrv4hi3,
        ashrv2si3, lshrv4hi3, lshrv2si3, mmx_lshrdi3, ashlv4hi3, ashlv2si3,
        mmx_ashldi3, mmx_packsswb, mmx_packssdw, mmx_packuswb, mmx_punpckhbw,
        mmx_punpckhwd, mmx_punpckhdq, mmx_punpcklbw, mmx_punpcklwd,
        mmx_punpckldq, emms, addv2sf3, subv2sf3, subrv2sf3, gtv2sf3, gev2sf3,
        eqv2sf3, pfmaxv2sf3, pfminv2sf3, mulv2sf3, femms, pf2id, pf2iw,
        pfacc, pfnacc, pfpnacc, pi2fw, floatv2si2, pfrcpv2sf2, pfrcpit1v2sf3,
        pfrcpit2v2sf3, pfrsqrtv2sf2, pfrsqit1v2sf3, pmulhrwv4hi3, pswapdv2si2,
        pswapdv2sf2): Move to mmx.md; rename as necessary with leading
        mmx_ prefix.
        (mmx_clrdi, pavgusb): Remove.
        (ldmxcsr, stmxcsr, sfence, sfence_insn): Move to sse.md; rename
        with leading sse_ prefix.
        * config/i386/sse.md: Receive them.
        * config/i386/mmx.md: New file.
        (MMXMODE12, MMXMODE24, mmxvecsize): New.
        (subrv2sf3): Turn into expander for normal subtraction.
        (mmx_addv2sf3, mmx_mulv2sf3, mmx_smaxv2sf3, mmx_sminv2sf3,
        mmx_eqv2sf3, mmx_mulv4hi3, mmx_smulv4hi3_highpart,
        mmx_umulv4hi3_highpart, mmx_pmaddwd, mmx_pmulhrwv4hi3, sse2_umulsidi3,
        mmx_umaxv8qi3, mmx_smaxv4hi3, mmx_uminv8qi3, mmx_sminv4hi3): Mark
        commutative; use ix86_binary_operator_ok.
        (mmx_add<MMXMODEI>3, mmx_ssadd<MMXMODE12>3, mmx_usadd<MMXMODE12>3,
        mmx_sub<MMXMODEI>3, mmx_sssub<MMXMODE12>3, mmx_ussub<MMXMODE12>3
        mmx_ashr<MMXMODE24>3, mmx_lshr<MMXMODE23>3, mmx_ashl<MMXMODE24>3
        mmx_eq<MMXMODEI>3, mmx_gt<MMXMODEI>3, mmx_and<MMXMODEI>3,
        mmx_nand<MMXMODEI>3, mmx_ior<MMXMODEI>3, mmx_xor<MMXMODEI>3):
        Macroize from existing patterns; use ix86_binary_operator_ok.
        (mmx_packsswb, mmx_packssdw, mmx_packuswb): Add memory alternative.
        (mmx_punpckhbw, mmx_punpcklbw, mmx_punpckhwd, mmx_punpcklwd,
        mmx_punpckhdq, mmx_punpckhdq, mmx_punpckldq): Likewise.  Model
        with vec_select+vec_concat.
        (mmx_pshufw, mmx_pshufw_1): Likewise.
        (mmx_uavgv8qi3): Merge pavgusb.  Model correcty.
        (mmx_uavgv4hi3): Model correctly.
        * config/i386/mmintrin.h (_mm_and_si64, _mm_andnot_si64, _mm_or_si64,
        _mm_xor_si64): Remove casts.

2005-01-09  Zdenek Dvorak  <dvorakz@suse.cz>

        PR tree-optimization/19224
        * tree-scalar-evolution.c (get_instantiated_value,
        set_instantiated_value): New functions.
        (instantiate_parameters_1): Cache the results.
        (instantiate_parameters, resolve_mixers): Initialize and free
        the cache.

2005-01-08  David Edelsohn  <edelsohn@gnu.org>

        * config/i386/i386.md (addhi_4): Correct reference in comment.
        (addqi_4): Same.

2005-01-08  Richard Henderson  <rth@redhat.com>

        * config/i386/emmintrin.h (_mm_cvtsi128_si32): Move earlier.
        (_mm_cvtsi128_si64x): Likewise.
        (_mm_srl_epi64, _mm_srl_epi32, _mm_srl_epi16, _mm_sra_epi32,
        _mm_sra_epi16, _mm_sll_epi64, _mm_sll_epi32, _mm_sll_epi16): Use
        the _mm_{srl,sll}i_foo counterpart, and _mm_cvtsi128_si32.
        * config/i386/i386-modes.def: Add V16HI, V32QI, V4DF, V8SF.
        * config/i386/i386-protos.h: Update.
        * config/i386/i386.c (print_operand): Add 'H'.
        (ix86_fixup_binary_operands): Split out from ...
        (ix86_expand_binary_operator): ... here.
        (ix86_fixup_binary_operands_no_copy): New.
        (ix86_expand_fp_absneg_operator): Handle vector mode results.
        (bdesc_2arg): Update names for sse{,2,3}_ prefixes.
        (ix86_init_mmx_sse_builtins): Remove *maskncmp* special cases.
        (safe_vector_operand): Use CONST0_RTX.
        (ix86_expand_binop_builtin): Use ix86_fixup_binary_operands.
        (ix86_expand_builtin): Merge CODE_FOR_sse2_maskmovdqu_rex64 and
        CODE_FOR_sse2_maskmovdqu.  Special case SSE version of MASKMOVDQU
        expansion.  Update names for sse{,2,3}_ prefixes.  Remove *maskncmp*
        special cases.
        * config/i386/i386.h (IX86_BUILTIN_CMPNGTSS): New.
        (IX86_BUILTIN_CMPNGESS): New.
        * config/i386/i386.md (UNSPEC_FIX_NOTRUNC): New.
        (attr type): Add sselog1.
        (attr unit, attr memory): Handle it.
        (movti, movti_internal, movti_rex64): Move near other integer moves.
        (movtf, movtf_internal): Move near other fp moves.
        (SSEMODE, SSEMODEI, vec_setv2df, vec_extractv2df, vec_initv2df,
        vec_setv4sf, vec_extractv4sf, vec_initv4sf, movv4sf, movv4sf_internal,
        movv2df, movv2df_internal, mov<SSEMODEI>, mov<SSEMODEI>_internal,
        movmisalign<SSEMODE>, sse_movups_1, sse_movmskps, sse_movntv4sf,
        sse_movhlps, sse_movlhps, sse_storehps, sse_loadhps, sse_storelps,
        sse_loadlps, sse_loadss, sse_loadss_1, sse_movss, sse_storess,
        sse_shufps, addv4sf3, vmaddv4sf3, subv4sf3, vmsubv4sf3, negv4sf2,
        mulv4sf3, vmmulv4sf3, divv4sf3, vmdivv4sf3, rcpv4sf2, vmrcpv4sf2,
        rsqrtv4sf2, vmrsqrtv4sf2, sqrtv4sf2, vmsqrtv4sf2, sse_andv4sf3,
        sse_nandv4sf3, sse_iorv4sf3, sse_xorv4sf3, sse2_andv2df3,
        sse2_nandv2df3, sse2_iorv2df3, sse2_xorv2df3, sse2_andv2di3,
        sse2_nandv2di3, sse2_iorv2di3, sse2_xorv2di3, maskcmpv4sf3,
        vmmaskcmpv4sf3, sse_comi, sse_ucomi, sse_unpckhps, sse_unpcklps,
        smaxv4sf3, vmsmaxv4sf3, sminv4sf3, vmsminv4sf3, cvtpi2ps, cvtps2pi,
        cvttps2pi, cvtsi2ss, cvtsi2ssq, cvtss2si, cvtss2siq, cvttss2si,
        cvttss2siq, addv2df3, vmaddv2df3, subv2df3, vmsubv2df3, mulv2df3,
        vmmulv2df3, divv2df3, vmdivv2df3, smaxv2df3, vmsmaxv2df3, sminv2df3,
        vmsminv2df3, sqrtv2df2, vmsqrtv2df2, maskcmpv2df3, vmmaskcmpv2df3,
        sse2_comi, sse2_ucomi, sse2_movmskpd, sse2_pmovmskb, sse2_maskmovdqu,
        sse2_maskmovdqu_rex64, sse2_movntv2df, sse2_movntv2di, sse2_movntsi,
        cvtdq2ps, cvtps2dq, cvttps2dq, cvtdq2pd, cvtpd2dq, cvttpd2dq,
        cvtpd2pi, cvttpd2pi, cvtpi2pd, cvtsd2si, cvtsd2siq, cvttsd2si,
        cvttsd2siq, cvtsi2sd, cvtsi2sdq, cvtsd2ss, cvtss2sd, cvtpd2ps,
        cvtps2pd, addv16qi3, addv8hi3, addv4si3, addv2di3, ssaddv16qi3,
        ssaddv8hi3, usaddv16qi3, usaddv8hi3, subv16qi3, subv8hi3, subv4si3,
        subv2di3, sssubv16qi3, sssubv8hi3, ussubv16qi3, ussubv8hi3, mulv8hi3,
        smulv8hi3_highpart, umulv8hi3_highpart, sse2_umulsidi3,
        sse2_umulv2siv2di3, sse2_pmaddwd, sse2_uavgv16qi3, sse2_uavgv8hi3,
        sse2_psadbw, sse2_pinsrw, sse2_pextrw, sse2_pshufd, sse2_pshuflw,
        sse2_pshufhw, eqv16qi3, eqv8hi3, eqv4si3, gtv16qi3, gtv8hi3,
        gtv4si3, umaxv16qi3, smaxv8hi3, uminv16qi3, sminv8hi3, ashrv8hi3,
        ashrv4si3, lshrv8hi3, lshrv4si3, lshrv2di3, ashlv8hi3, ashlv4si3,
        ashlv2di3, sse2_ashlti3, sse2_lshrti3, sse2_unpckhpd, sse2_unpcklpd,
        sse2_packsswb, sse2_packssdw, sse2_packuswb, sse2_punpckhbw,
        sse2_punpckhwd, sse2_punpckhdq, sse2_punpcklbw, sse2_punpcklwd,
        sse2_punpckldq, sse2_punpcklqdq, sse2_punpckhqdq, sse2_movupd,
        sse2_movdqu, sse2_movdq2q, sse2_movdq2q_rex64, sse2_movq2dq,
        sse2_movq2dq_rex64, sse2_loadd, sse2_stored, sse2_storehpd,
        sse2_loadhpd, sse2_storelpd, sse2_loadlpd, sse2_movsd, sse2_loadsd,
        sse2_loadsd_1, sse2_storesd, sse2_shufpd, sse2_clflush, sse2_mfence,
        mfence_insn, sse2_lfence, lfence_insn, mwait, monitor, addsubv4sf3,
        addsubv2df3, haddv4sf3, haddv2df3, hsubv4sf3, hsubv2df3, movshdup,
        movsldup, lddqu, loadddup, movddup): Move to sse.md.  Any with
        non-optabs meanings renamed with an "sse{,2,3}_" prefix at the
        same time.
        (SSEPUSH, push<SSEPUSH>): Remove.
        (MMXPUSH, push<MMXPUSH>): Remove.
        (sse_movaps, sse_movaps_1, sse_movups): Remove.
        (sse2_movapd, sse2_movdqa, sse2_movq): Remove.
        (sse2_andti3, sse2_nandti3, sse2_iorti3, sse2_xorti3): Remove.
        (sse_clrv4sf, sse_clrv2df, sse2_clrti): Remove.
        (maskncmpv4sf3, vmmaskncmpv4sf3): Remove.
        (maskncmpv2df3, vmmaskncmpv2df3): Remove.
        (ashrv8hi3_ti, ashrv4si3_ti, lshrv8hi3_ti, lshrv4si3_ti): Remove.
        (lshrv2di3_ti, ashlv8hi3_ti, ashlv4si3_ti, ashlv2di3_ti): Remove.
        * config/i386/athlon.md (athlon_sselog_load): Handle sselog1.
        (athlon_sselog_load_k8, athlon_sselog, athlon_sselog_k8): Likewise.
        * config/i386/ppro.md (ppro_sse_div_V4SF_load): Fix memory attr.
        (ppro_sse_log_V4SF_load): Similarly.  Handle sselog1.
        (ppro_sse_log_V4SF): Handle sselog1.
        * config/i386/predicates.md (const_0_to_1_operand): New.
        (const_0_to_255_mul_8_operand): New.
        (const_1_to_31_operand): Rename from const_int_1_31_operand.
        (const_2_to_3_operand, const_4_to_7_operand): New.
        * config/i386/sse.md: New file.
        (SSEMODE12, SSEMODE24, SSEMODE124, SSEMODE248, ssevecsize): New.
        (sse_movups): Rename from sse_movups_1.
        (sse_loadlss): Rename from sse_loadss_1.
        (andv4sf3, iorv4sf3, xorv4sf3, andv2df3): Remove the sse prefix
        from the name.
        (negv4sf2): Use ix86_expand_fp_absneg_operator.
        (absv4sf2, negv2df, absv2df): New.
        (addv4sf3): Add expander to call ix86_fixup_binary_operands_no_copy.
        (subv4sf3, mulv4sf3, divv4sf3, smaxv4sf3, sminv4sf3, andv4sf3,
        iorv4sf3, xorv4sf3, addv2df3, subv2df3, mulv2df3, divv2df3,
        smaxv2df3, sminv2df3, andv2df3, iorv2df3, xorv2df3, mulv8hi3,
        umaxv16qi3, smaxv8hi3, uminv16qi3, sminv8hi3): Likewise.
        (sse3_addsubv4sf3): Model correctly.
        sse3_haddv4sf3, sse3_hsubv4sf3, sse3_addsubv2df3, sse3_haddv2df3,
        sse3_hsubv2df3, sse2_ashlti3, sse2_lshrti3): Likewise.
        (sse_movhlps): Model with vec_select+vec_concat.
        (sse_movlhps, sse_unpckhps, sse_unpcklps, sse3_movshdup,
        sse3_movsldup, sse_shufps, sse_shufps_1, sse2_unpckhpd, sse3_movddup,
        sse2_unpcklpd, sse2_shufpd, sse2_shufpd_1, sse2_punpckhbw,
        sse2_punpcklbw, sse2_punpckhwd, sse2_punpcklwd, sse2_punpckhdq,
        sse2_punpckldq, sse2_punpckhqdq, sse2_punpcklqdq, sse2_pshufd,
        sse2_pshufd_1, sse2_pshuflw, sse2_pshuflw_1, sse2_pshufhw,
        sse2_pshufhw_1): Likewise.
        (neg<SSEMODEI>2, one_cmpl<SSEMODEI>2): New.
        (add<SSEMODEI>3, sse2_ssadd<SSEMODE12>3, sse2_usadd<SSEMODE12>3,
        sub<SSEMODEI>3, sse2_sssub<SSEMODE12>3, sse2_ussub<SSEMODE12>3,
        ashr<SSEMODE24>3, lshr<SSEMODE248>3, sse2_eq<SSEMODE124>3,
        sse2_gt<SSEMODDE124>3, and<SSEMODEI>3, sse_nand<SSEMODEI>3,
        ior<SSEMODEI>3, xor<SSEMODEI>3): Macroize from existing patterns.
        (addv4sf3, sse_vmaddv4sf3, mulv4sf3, sse_vmmulv4sf3, smaxv4sf3,
        sse_vmsmaxv4sf3, sminv4sf3, sse_vmsminv4sf3, addv2df3, sse2_vmaddv2df3,
        mulv2df3, sse2_vmmulv2df3, smaxv2df3, sse2_vmsmaxv2df3, sminv2df3,
        sse2_vmsminv2df3, umaxv16qi3, smaxv8hi3, uminv16qi3
        sminv8hi3): Mark commutative
        operands.  Use ix86_binary_operator_ok.
        (sse_unpckhps, sse_unpcklps, sse2_packsswb, sse2_packssdw,
        sse2_packuswb, sse2_punpckhbw, sse2_punpcklbw, sse2_punpckhwd,
        sse2_punpcklwd, sse2_punpckhdq, sse2_punpckldq, sse2_punpckhqdq,
        sse2_punpcklqdq): Allow operand2 in memory.
        (sse_movhlps, sse_movlhps, sse2_unpckhpd, sse2_unpcklpd
        sse2_movsd): Add memory alternatives.
        (sse_storelps): Turn expander into an insn; split after reload.
        (sse_storess, sse2_loadhpd, sse2_loadlpd): Add non-xmm inputs.
        (sse2_storehpd, sse2_storelpd): Add non-xmm outputs.

2005-01-08  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * configure.ac (DWARF-2 debug_line): Use objdump.
        * configure: Regenerate.

2005-01-08  Jeff Law  <law@redhat.com>
            Diego Novillo  <dnovillo@redhat.com>

        PR tree-optimization/18241
        * tree-nrv.c (tree_nrv): Ignore volatile return values.
        * tree-ssa-dse.c (dse_optimize_stmt): Do not optimize
        statements with volatile operands.
        * tree-ssa-operands.c (add_stmt_operand): Do add volatile
        operands after marking a statement with has_volatile_ops.

2005-01-08  Roger Sayle  <roger@eyesopen.com>

        * tree.c (int_fits_type_p): Always honor integer constant
        TYPE_MIN_VALUE and TYPE_MAX_VALUE if they exist.

2005-01-08  Roger Sayle  <roger@eyesopen.com>

        * ifcvt.c (find_if_case_1): Reinstate 2005-01-04 change, now that
        the latent bug in rtl_delete_block has been resolved.

2005-01-08  Richard Sandiford  <rsandifo@redhat.com>

        * config/mips/t-iris6 (MULTILIB_DIRNAMES): Use -mabi argument values.
        (MULTILIB_OSDIRNAMES): Use the standard lib, lib32 and lib64.

2005-01-08  Richard Sandiford  <rsandifo@redhat.com>

        * config/mips/t-slibgcc-irix (SHLIB_LINK): Install a copy of the
        library as @multilib_dir@/$(SHLIB_SONAME).

2005-01-07  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * configure.ac (HAVE_AS_OFFSETABLE_LO10): Fix typo.
        * configure: Regenerate.

2005-01-07  Jakub Jelinek  <jakub@redhat.com>

        * c-common.c (handle_mode_attribute): For ENUMERAL_TYPE, also copy
        TYPE_MODE.

2005-01-07  David Edelsohn  <edelsohn@gnu.org>

        PR target/13674
        * config/rs6000/rs6000.c (rs6000_legitimize_reload_address):
        Convert non-word aligned offset address using ld/std into
        indirect address.

2005-01-07  Richard Henderson  <rth@redhat.com>

        * config/i386/i386.md (sse_loadhps splitter): Fix operand number typo.

2005-01-07  Richard SAndiford  <rsandifo@redhat.com>

        * tree.h (IS_EXPR_CODE_CLASS): Use a straight-forward range check.

2005-01-07  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/19283
        * fold-const.c (fold_widened_comparison): Return NULL if shorter_type
        is not shorter than the original type.

        PR rtl-optimization/19012
        * config/i386/i386.md (addqi_1_slp): Set memory attribute.

        PR rtl-optimization/18861
        * cfgbuild.c (BLOCK_USED_BY_TABLEJUMP): Define.
        (FULL_STATE): Define.
        (mark_tablejump_edge): New function.
        (purge_dead_tablejump_edges): New function.
        (find_bb_boundaries): Use it.

        PR tree-optimization/18828
        * builtins.c (expand_builtin_next_arg): Remove argument and all
        the argument checking.
        (expand_builtin): Adjust caller.
        (expand_builtin_va_start): Likewise.  Remove error for too many
        arguments.
        (fold_builtin_next_arg): Issue error for too many arguments.
        After checking arguments, replace them with magic arguments that
        prevent further checking of the args.

2005-01-06  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa64-hpux.h (STARTFILE_SPEC): Fix typo in spec.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

        PR target/6077
        * gcc.c (input_suffix_matches): Tweak the semantics of %{.s:...}
        and %{.S:...} (and their negative variants) to test whether the
        input file is assembler or pre-processed-assembler independent of
        the actual filename extension.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

        * simplify-rtx.c (simplify_subreg): Simplify truncations of shifts
        of sign or zero extended values.

2005-01-06  Geoffrey Keating  <geoffk@apple.com>

        * c-cppbuiltin.c (builtin_define_float_constants): Set __*_EPSILON__
        for IBM long double format correctly.

2005-01-06  Daniel Berlin <dberlin@dberlin.org>

        Fix PR tree-optimization/18792

        * tree-data-ref.c (build_classic_dist_vector): Change first_loop
        to first_loop_depth, and use loop depth instead of loop number.
        (build_classic_dir_vector): Ditto.
        (compute_data_dependences_for_loop): Use depth, not loop number.
        * tree-loop-linear.c (try_interchange_loops): Use loop depth, not loop
        number. Pass in loops, instead of loop numbers.
        (gather_interchange_stats): Ditto.
        (linear_transform_loops): Ditto.

2005-01-06  Richard Sandiford  <rsandifo@redhat.com>

        PR rtl-opt/13299
        * loop.c (get_monotonic_increment, biased_biv_fits_mode_p,
        biv_fits_mode_p, extension_within_bounds_p): New functions.
        (check_ext_dependent_givs): Use them.

2005-01-06  Roger Sayle  <roger@eyesopen.com>

        * cfgrtl.c (rtl_delete_block): A basic block may be followed by
        more than one barrier, in which case we should delete them all.

2005-01-06  Tobias Schlueter  <tobias.schlueter@physik.uni-muenchen.de>

        * gcc.c (process_command): Change year in 'gcc --version' to 2005.

2005-01-05  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR middle-end/19286
        Fix PR debug/19267
        * dwarf2out.c (gen_subprogram_die): If we've already tried to
        output this subprogram, simply ignore this attempt to do it again.
        (add_abstract_origin_attribute): Don't abort trying to add the abstract
        origin attribute if it's not possible.
        (gen_block_die): Don't ignore subblocks of "unused" blocks.
        (decls_for_scope): Ditto.
        * gimple-low.c (mark_blocks_with_used_subblocks): Remove.
        (mark_used_blocks): Don't call mark_blocks_with_used_subblocks.

2005-01-05  Richard Henderson  <rth@redhat.com>

        PR target/11327
        * config/i386/i386.c (BUILTIN_DESC_SWAP_OPERANDS): New.
        (bdesc_2arg): Use it.
        (ix86_expand_binop_builtin): Force operands into registers
        when optimizing.
        (ix86_expand_unop_builtin, ix86_expand_unop1_builtin,
        ix86_expand_sse_compare, ix86_expand_sse_comi,
        ix86_expand_builtin): Likewise.

2005-01-05  Richard Henderson  <rth@redhat.com>

        * config/ia64/ia64.c (rtx_needs_barrier): Handle CONST_VECTOR
        and VEC_SELECT.
        * config/ia64/vect.md (mulv8qi3): Re-implement with mix_[rl].
        (mulv4hi3): Set itanium_class mmmul.
        (fpack_sfxf, fpack_xfsf, fpack_xfxf): Remove.
        (fpack): Rename from fpack_sfsf.

2005-01-05  Richard Henderson  <rth@redhat.com>

        PR rtl-opt/10692
        * reload1.c (do_input_reload): Restrict the optimization deleteing
        a previous output reload to RELOAD_FOR_INPUT.

2005-01-05  Steven Bosscher  <stevenb@suse.de>

        * combine.c (expand_compound_operation)  <ZERO_EXTRACT>: Add
        comment that we fall through after case.
        (mark_used_regs_combine): Don't expect a SIGN_EXTRACT in a SET_DEST.
        (distribute_links): Likewise.
        * cse.c (cse_insn): Likewise.
        * cselib.c (cselib_invalidate_mem): Likewise.
        * df.c: Update comments at the top of the file.
        (read_modify_subreg_p): Update comments here too.
        (df_def_record_1): Don't expect a SIGN_EXTRACT in a SET_DEST.
        * flow.c (mark_set_1): Likewise.
        (mark_used_regs): Likewise.
        * gcse.c (mems_conflict_for_gcse_p): Likewise.
        (canon_list_insert): Likewise.
        (mark_set): Likewise.
        (try_replace_reg): Likewise.
        (store_killed_in_insn): Likewise.
        * loop.c (count_one_set): Likewise.
        (basic_induction_var): Likewise.
        * postreload-gcse.c (find_mem_conflicts): Likewise.
        * postreload.c (reload_combine_note_store): Likewise.
        (move2add_note_store): Likewise.
        * reload.c (find_equiv_reg): Likewise.
        (mark_referenced_resources): Likewise.
        * rtlanal.c (set_noop_p): Likewise.
        (note_stores): Likewise.
        (note_uses): Likewise.
        * sched-deps.c (sched_analyze_1): Likewise.
        * sched-rgn.c (check_live_1): Likewise.
        (update_live_1): Likewise.
        * config/i860/i860.c: Likewise.

        * rtl.dec (SIGN_EXTRACT): Document that this cannot appear as
        an lvalue.
        (ZERO_EXTRACT): Mention that this one can be an lvalue.

        * doc/rtl.texi: Update documentation for bit-fields and SET.

2005-01-05  Roger Sayle  <roger@eyesopen.com>

        * ifcvt.c (find_if_case_1): Revert 2005-01-04 change.

2005-01-05  Jan Hubicka  <jh@suse.cz>
            Richard Henderson  <rth@redhat.com>

        PR target/18910
        * config/i386/i386.c (ix86_expand_move): Handle tls symbols
        with an offset.

2005-01-05  Richard Henderson  <rth@redhat.com>

        PR target/12902
        * config/i386/i386.md (sse_movhps, sse_movlps): Remove.
        (sse_shufps): Change operand 3 to const_int_operand.
        (sse2_storelps): Fix typo in template.
        (sse_storehps, sse_loadhps, sse_storelps, sse_loadlps): New.
        * config/i386/i386.c (ix86_expand_vector_move_misalign): Use them.
        (ix86_expand_builtin): Likewise.

2005-01-05  Julian Brown  <julian@codesourcery.com>

        * config/arm/arm.c (arm_return_in_memory): Treat complex types
        as aggregates for AAPCS ABIs.

2005-01-05  Stan Shebs  <shebs@apple.com>

        * unwind-dw2-fde-darwin.c (examine_objects): Use 64-bit
        Mach-O getters if ppc64.
        * config/darwin.c (darwin_asm_output_dwarf_delta): Obey
        size argument.
        * config/darwin.h (ASM_PREFERRED_EH_DATA_FORMAT): Use
        signed four-byte field for global code case.
        (STARTFILE_SPEC): Avoid crt2.o for 64-bit compilation.

2005-01-05  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/19100
        * c-common.c: Include real.h.
        (c_common_truthvalue_conversion): Avoid destructively modifying expr.
        Correctly handle TREE_CONSTANT_OVERFLOW for INTEGER_CST.
        Correctly handle TREE_CONSTANT_OVERFLOW and NaNs for REAL_CST.
        * Makefile.in (c-common.o): Update dependencies.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

        * c-parse.in (asm_string): Add trailing semicolon.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

        * c-parse.in (asm_string): New.  Don't allow wide strings in
        'asm'.
        (simple_asm_expr, asm_argument, asm_operand, asm_clobbers): Use
        asm_string instead of STRING.

2005-01-05  Joseph S. Myers  <joseph@codesourcery.com>

        * c-typeck.c (constructor_no_implicit): Remove.
        (set_designator, process_init_element): Don't check
        constructor_no_implicit.

2005-01-05  J"orn Rennecke <joern.rennecke@st.com>
            Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/16482
        * lcm.c (create_pre_exit): New.
        (optimize_mode_switching): In MODE_ENTRY / MODE_EXIT case, set
        ENTRY_EXIT_EXTRA to 3.  Use create_pre_exit.

2004-01-05  Richard Earnshaw  <rearnsha@arm.com>

        * arm.h (TARGET_OPTIONS): Correctly record -mhard-float and
        -msoft-float in target_float_switch.
        * arm.c (arm_override_options): Fix processing of target_float_switch.

2004-01-05  Richard Earnshaw  <rearnsha@arm.com>

        * arm/vfp.md (arm_movsi_vfp): Hide VFP register classes from register
        preferencing.

2004-01-05  Uros Bizjak  <uros@kss-loka.si>

        * doc/invoke.texi (Intel 386 and AMD x86-64 Options):
        Replace i387 with 'i386 compiler' in -mfpmath=sse option.

2005-01-04  Roger Sayle  <roger@eyesopen.com>

        * ifcvt.c (find_if_case_1): Avoid creating an empty forwarder block,
        if deleting the then-block allows the test-block to fallthru to the
        else-block.

2005-01-04  Andrew Pinski  <pinskia@physics.uc.edu>

        PR c/19152
        * c-decl.c (diagnose_mismatched_decls): Accept "extern inline" declared
        after the full declaration if the are in two different TUs.

2005-01-04  Richard Henderson  <rth@redhat.com>

        PR tree-opt/19158
        * tree-sra.c (generate_one_element_init): Just
        call gimplify_and_add.
        (generate_element_init): Record the
        new referenced variables and mark them for renaming
        and split out to ...
        (generate_element_init_1): This.
        (scalarize_init): Don't call push_gimplify_context/
        pop_gimplify_context.

2005-01-04  Geoffrey Keating  <geoffk@apple.com>

        * toplev.c (get_src_pwd): Handle failure of getpwd().

2005-01-04  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (fold_single_bit_test): Delete unreachable handling
        of TRUTH_NOT_EXPR.
        (fold): Don't call fold_single_bit_test with a TRUTH_NOT_EXPR, as
        all the cases handled by it are inverted by invert_truthvalue.

2005-01-04  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config/sparc/sparc.md (save_register_windowdi): Add missing mode.
        (save_register_windowsi): Likewise.

2005-01-04  Richard Henderson  <rth@redhat.com>

        * tree-mudflap.c (mf_varname_tree): Fix thinko setting declname.

2005-01-04  Uros Bizjak  <uros@kss-loka.si>

        PR middle-end/17767
        * cse.c (fold_rtx) [RTX_COMPARE, RTX_COMM_COMPARE]: Don't attempt
        any simplifications of vector mode comparison operators.
        * simplify-rtx.c (simplify_relational_operation): Fix variable name.

2005-01-04  Paolo Bonzini  <bonzini@gnu.org>
            Devang Patel  <dpatel@apple.com>

        PR tree-optimization/18308
        * tree-if-conv.c (add_to_dst_predicate_list): Gimplify
        the operands before creating a new expression.
        * dojump.c (do_jump): Make drop_through_label available
        for all cases.  Add expansion of COND_EXPR.

2005-01-04  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.c (vect_analyze_offset_expr): Test for
        INTEGER_CST instead of TREE_CONSTANT.
        (vect_gen_niters_for_prolog_loop): Test for INTEGER_CST
        instead of TREE_CONSTANT.
        (vect_analyze_pointer_ref_access): Test for INTEGER_CST
        instead of TREE_CONSTANT.

2005-01-04  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * tree-eh.c (replace_goto_queue): Return early if the queue is empty.

2005-01-04  Uros Bizjak  <uros@kss-loka.si>

        PR target/19240
        * config/i386/i386.md (*fop_df_1_i387): Disable for TARGET_SSE_MATH.
        (*fop_df_1_i387): Disable for (TARGET_SSE2 && TARGET_SSE_MATH).

2005-01-03  Richard Henderson  <rth@redhat.com>

        * fold-const.c (force_fit_type): Cope with types larger than 2 HWI.
        (fold_convert_const_int_from_int, fold_convert_const_int_from_real,
        fold_convert_const_real_from_real): Split out from ...
        (fold_convert_const): ... here.

2005-01-03  Richard Henderson  <rth@redhat.com>

        PR target/19235
        * config/i386/i386.md (movdi_2): Separate SSE1 and SSE2 alternatives.
        (mov<MMXMODEI>_internal): Likewise.
        (movdf_nointeger): Prefer Y while not preferring, but allowing, x.
        Add V2SF case; use it for SSE1; don't use TI.
        (movdf_integer): Likewise.
        (mov<SSEMODEI>_internal, movti_internal): Force V4SF for SSE1.

2005-01-03  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.c (vect_strip_conversions): New function.
        (vect_analyze_offset_expr): Call vect_strip_conversions. Add
        check for binary class.

2005-01-03  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR debug/17924
        Fix PR debug/19191
        * dwarf2out.c (block_ultimate_origin): Follow decl origin if origin
        is a decl.
        * gimple-low.c (mark_blocks_with_used_vars): New function.
        (mark_blocks_with_used_subblocks): Ditto.
        (mark_used_blocks): Ditto.
        (pass_mark_used_blocks): New pass.
        * tree-inline.c: Include debug.h.
        (expand_call_inline): Call outlining_inline_function here.
        * tree-optimize.c (init_tree_optimization_passes): Add
        pass_mark_used_blocks.
        * tree-pass.h (pass_mark_used_blocks): New.
        * Makefile.in (tree-inline.o): Add debug.h dependency.

2005-01-03  Geoffrey Keating  <geoffk@apple.com>

        * config/darwin.c (darwin_handle_weak_import_attribute): Permit
        VAR_DECLs to have weak_import attribute.

        * config/rs6000/darwin-fallback.c: Use 'ucontext_t' rather than
        'struct ucontext'.

2004-01-03  Steven Bosscher  <stevenb@suse.de>

        * passes.c (rest_of_compilation): Don't run regmove if only
        flag_expensive_optimizations, require flag_regmove instead.

2005-01-03  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config/sparc/litecoff.h (TARGET_OS_CPP_BUILTINS): Do not
        register "sparc".
        * config/sparc/sysv4-only.h (TARGET_OS_CPP_BUILTINS): Likewise.
        * config/sparc/rtemself.h (TARGET_SUB_OS_CPP_BUILTINS): Likewise.
        * config/sparc/sol2-64.h (TARGET_SUB_OS_CPP_BUILTINS): Delete.
        * config/sparc/sp64-elf.h (TARGET_SUB_OS_CPP_BUILTINS): Likewise.

2005-01-03  Richard Henderson  <rth@redhat.com>

        * config/ia64/ia64.c (TARGET_VECTOR_MODE_SUPPORTED_P): New.
        (ia64_const_ok_for_letter_p): New.
        (ia64_const_double_ok_for_letter_p): New.
        (ia64_extra_constraint): New.
        (ia64_expand_vecint_compare): New.
        (ia64_expand_vcondu_v2si): New.
        (ia64_expand_vecint_cmov): New.
        (ia64_expand_vecint_minmax): New.
        (ia64_print_operand): Add 'v'.
        (ia64_preferred_reload_class): New.
        (ia64_vector_mode_supported_p): New.
        * config/ia64/ia64.h (UNITS_PER_SIMD_WORD): New.
        (PREFERRED_RELOAD_CLASS): Move to function.
        (CONST_OK_FOR_LETTER_P): Move to function.
        (CONST_DOUBLE_OK_FOR_LETTER_P): Move to function.
        (CONSTRAINT_OK_FOR_Q, CONSTRAINT_OK_FOR_R): Remove.
        (CONSTRAINT_OK_FOR_S, CONSTRAINT_OK_FOR_T): Remove.
        (EXTRA_CONSTRAINT): Move to function.
        * config/ia64/ia64.md: Include vect.md.
        (itanium_class): Add mmalua.
        (type): Handle it.
        * config/ia64/itanium1.md (1_mmalua): New.  Add it to bypasses.
        (1b_mmalua): New.
        * config/ia64/itanium2.md (2_mmalua, 2b_mmalua): Similarly.
        * config/ia64/predicates.md (gr_reg_or_0_operand): Accept any
        CONST0_RTX.
        (const_int_2bit_operand): New.
        (fr_reg_or_0_operand): New.
        * config/ia64/ia64-modes.def: Add vector modes.
        * config/ia64/ia64-protos.h: Update.
        * config/ia64/vect.md: New file.

2005-01-03  Richard Henderson  <rth@redhat.com>

        * simplify-rtx.c (simplify_binary_operation): Handle VEC_CONCAT.

2005-01-03  Uros Bizjak  <uros@kss-loka.si>

        PR target/19236
        * config/i386/i386.c (log1psf2): Change mode of operands[0,1]
        to SFmode.
        (log1pdf2): Change mode of operands[0,1] to DFmode.

2005-01-03  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * config/sparc/sparc.h (SPARC_RELAXED_ORDERING): Define to false.
        * config/sparc/linux.h (SPARC_RELAXED_ORDERING): Define to true.
        * config/sparc/linux64.h (SPARC_RELAXED_ORDERING): Likewise.
        * config/sparc/sparc.c (TARGET_RELAXED_ORDERING): Define to
        SPARC_RELAXED_ORDERING.

2005-01-03  Richard Henderson  <rth@redhat.com>
            Uros Bizjak  <uros@kss-loka.si>

        PR target/14631
        * config/i386/i386.c (ix86_expand_builtin): [IX86_BUILTIN_PINSRW,
        IX86_BUILTIN_PINSRW128]: Fix wrong selector range in error message.
        * config/i386/i386.md (mmx_pinsrw, sse2_pinsrw): Fix selector
        handling.
        (*mmx_pinsrw, *sse2_pinsrw): New patterns.
        * config/i386/i386/predicates.md (const_pow2_1_to_8_operand,
        const_pow2_1_to_128_operand): New predicates.

2005-01-02  Greg McGary  <greg@mcgary.org>

        * tree-mudflap.c (mf_varname_tree): decl_printable_name handles
        anonymous decls.
        (mf_xform_derefs_1) [RESULT_DECL, STRING_CST]: Handle as innermost
        object.  [ptr_type]: Remove unused variable.
        Remember nearest addressable array-element or record-component
        when checking bitfield components.  Tolerate empty BIND_EXPR.

2005-01-01  Richard Henderson  <rth@redhat.com>

        * tree-vectorizer.c (vect_analyze_offset_expr): Strip conversions
        that don't narrow the value.  Fail for other conversions.

2005-01-01  Richard Henderson  <rth@redhat.com>

        PR c/19031
        * c-decl.c (pop_file_scope): Call maybe_apply_pending_pragma_weaks.
        * c-lang.c (finish_file): Don't do it here.
        * objc/objc-act.c (objc_finish_file): Likewise.

        * cgraph.c (decl_assembler_name_equal): New.
        (cgraph_node_for_asm, cgraph_varpool_node_for_asm): New.
        (cgraph_varpool_node): Actually link up cgraph_varpool_nodes.
        * cgraph.h (struct cgraph_varpool_node): Add next.
        (cgraph_node_for_asm, cgraph_varpool_node_for_asm): Declare.
        * varasm.c (assemble_alias): Mark the target as needed.

2005-01-01  Andrew Pinski  <pinskia@physics.uc.edu>

        PR middle-end/19221
        * function.c (get_arg_pointer_save_area): Use entry_of_function
        instead of get_insns.

2005-01-01  Roger Sayle  <roger@eyesopen.com>
            Andrew Pinski  <pinskia@physics.uc.edu>
            James E. Wilson  <wilson@specifixinc.com>

        PR rtl-optimization/12092
        * loop.c (emit_prefetch_instructions): Do nothing if PREFETCH_BLOCK
        is zero.

2005-01-01  Roger Sayle  <roger@eyesopen.com>
            Olivier Hainque  <hainque@act-europe.fr>

        * tree.c (int_fits_type_p): A narrower type always fits in a
        wider one, except for negative values into unsigned types.

2005-01-01  Roger Sayle  <roger@eyesopen.com>

        * tree.c (int_fits_type_p): Compare the result of force_fit_type
        with the original constant rather than require TREE_OVERFLOW.

2005-01-01  Steven Bosscher  <stevenb@suse.de>

        PR middle-end/17544
        * c-decl.c (finish_function): If compiling C99, annotate the
        compiler generated return with the current file name and line 0.
        * tree-cfg.c (remove_useless_stmts_warn_notreached): Only warn if
        the source line is greater than 0.
        (remove_bb): Likewise.

See ChangeLog.12 for earlier changes.