gcc/

[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2006-11-20  Carlos O'Donell  <carlos@codesourcery.com>
            Mark Mitchell  <mark@codesourcery.com>

        * cppdefault.c: Define cpp_PREFIX, cpp_PREFIX_len, and 
        gcc_exec_prefix.
        (cpp_relocated): New function.
        * cppdefault.h: Declare cpp_PREFIX, cpp_PREFIX_len, gcc_exec_prefix 
        and cpp_relocated. 
        * Makefile.in (PREPROCESSOR_DEFINES): Add -DPREFIX option.
        * c-incpath.c (add_standard_paths): Call cpp_relocated. If relocated,
        replace configured prefix with gcc_exec_prefix. 

2006-11-20  Bernd Schmidt  <bernd.schmidt@analog.com>

        * config/bfin/bfin.h (LEGITIMATE_CONSTANT_P): Call
        bfin_legitimate_constant_p.
        * config/bfin/bfin.md (movsi expander): Check return value of
        expand_mvoe.
        * config/bfin/bfin-protos.h (bfin_legitimate_constant_p): Declare.
        (expand_move): Adjust prototype.
        * config/bfin/bfin.c (expand_move): Now returns bool.  Handle
        invalid constants specially.
        (bfin_cannot_force_const_mem, bfin_legitimate_constant_p): New
        functions.
        (TARGET_CANNOT_FORCE_CONST_MEM): New macro.

        * config/bfin/bfin.md (call_symbol, call_value_symbol, sibcall_symbol,
        sibcall_value_symbol): Allow these patterns if
        TARGET_LEAF_ID_SHARED_LIBRARY.
        * config/bfin/bfin.c (bfin_expand_call): Allow them here as well.
        (override_options): Turn on id shared library flags if -msep-data,
        but disallow the combination of these options on the command line.
        * config/bfin/bfin.h (TARGET_LEAF_ID_SHARED_LIBRARY, MASK_SEP_DATA
        MASK_LEAF_ID_SHARED_LIBRARY, TARGET_SEP_DATA): New macros.
        (DRIVER_SELF_SPECS): -mleaf-id-shared-library implies
        -mid-shared-library.
        (TARGET_SWITCHES): Add -mleaf-id-shared-library and -msep-data.
        * doc/invoke.texi (Blackfin Options): Document new switches.

        * config/bfin/bfin.c (bfin_function_ok_for_sibcall): Handle some
        edge cases with local functions and TARGET_ID_SHARED_LIBRARY.

        * tree-ssa-loop-ivopts.c (get_address_cost): Do not artificially
        inflate costs for addresses with an out-of-bounds address.

2006-11-19  Andrew Pinski  <pinskia@gmail.com>

        PR rtl-opt/29879
        * fwprop.c (loops): Remove.
        (forward_propagate_into): Use current_loops instead of
        loops.
        (fwprop_init): Call loop_optimizer_init instead of
        flow_loops_find.
        (fwprop_done): Call loop_optimizer_finalize instead of
        flow_loops_free.
        (fwprop): Use current_loops instead of loops.

2006-11-19  Gabriel Dos Reis  <gdr@integrable-solutions.net>

        PR c++/8586
        * c-opts.c (c_common_handle_option): Enable -Wwrite-strings if -Wall.

2006-11-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR target/29114
        * pa.c (emit_move_sequence): Don't split constants with PLUS for modes
        larger than BITS_PER_WORD.

2006-11-18  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR fortran/27885
        PR middle-end/28176
        * stor-layout.c (set_sizetype): Limit precision of *bitsizetypes types
        to MAX_FIXED_MODE_SIZE.

2006-11-18  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (integer_valued_real_p): Handle fmin/fmax.
        (fold_builtin_fmin_fmax): New.
        (fold_builtin_1): Use it.

        * fold-const.c (fold_strip_sign_ops): Handle copysign.

2006-11-18  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386.c (ix86_builtins): New array for ix86
        builtin function decls.
        (def_builtin): New function.
        (def_builtin_const): Likewise.
        (ix86_init_mmx_sse_builtins): Mark sqrt and cvt builtins const.

2006-11-18  Vladimir Makarov  <vmakarov@redhat.com>

        * doc/invoke.texi (core2): Add item.

        * config/i386/i386.h (TARGET_CORE2, TARGET_CPU_DEFAULT_core2): New
        macros.
        (TARGET_CPU_CPP_BUILTINS): Add code for core2.
        (TARGET_CPU_DEFAULT_generic): Change value.
        (TARGET_CPU_DEFAULT_NAMES): Add core2.
        (processor_type): Add new constant PROCESSOR_CORE2.

        * config/i386/i386.md (cpu): Add core2.

        * config/i386/i386.c (core2_cost): New initialized variable.
        (m_CORE2): New macro.
        (x86_use_leave, x86_push_memory, x86_movx, x86_unroll_strlen,
        x86_deep_branch, x86_partial_reg_stall, x86_use_simode_fiop,
        x86_use_cltd, x86_promote_QImode, x86_sub_esp_4, x86_sub_esp_8,
        x86_add_esp_4, x86_add_esp_8, x86_integer_DFmode_moves,
        x86_partial_reg_dependency, x86_memory_mismatch_stall,
        x86_accumulate_outgoing_args, x86_prologue_using_move,
        x86_epilogue_using_move, x86_arch_always_fancy_math_387,
        x86_sse_partial_reg_dependency, x86_rep_movl_optimal,
        x86_use_incdec, x86_four_jump_limit, x86_schedule,
        x86_pad_returns): Add m_CORE2.
        (override_options): Add entries for Core2.
        (ix86_issue_rate): Add case for Core2.
        
2006-11-18  Aldy Hernandez  <aldyh@redhat.com>

        * doc/invoke.texi: Fix mno-isel typo.

2006-11-18  Joseph Myers  <joseph@codesourcery.com>

        * config/rs6000/spe.md (movv4hi_internal): Add alternative for
        easy vector constant loads.

2006-11-18  Joseph Myers  <joseph@codesourcery.com>

        * config/rs6000/rs6000.h (TARGET_NO_LWSYNC): Define.
        * config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
        __NO_LWSYNC__ if TARGET_NO_LWSYNC.
        * config/rs6000/sync.md (lwsync): Emit plain sync if
        TARGET_NO_LWSYNC.

2006-11-17  DJ Delorie  <dj@redhat.com>

        * reload1.c (reloads_unique_chain): New.
        (reloads_conflict): Call it.

2006-11-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/predicates.md (addsubx_operand): New.
        * config/xtensa/xtensa.c (xtensa_emit_branch): New.
        (xtensa_emit_bit_branch): New.
        (xtensa_emit_movcc): New.
        * config/xtensa/xtensa.md (any_minmax): New code macro.
        (minmax): New code attribute.
        (any_cond, any_scc, any_scc_sf): New code macros.
        (*addx2, *addx4, *addx8): Delete.
        (*addx): New.
        (*subx2, *subx4, *subx8): Delete.
        (*subx): New.
        (sminsi3, uminsi3, smaxsi3, umaxsi3): Use any_minmax macro.
        (beq, bne, bgt, bge, blt, ble, bgtu, bgeu, bltu, bleu): Use any_cond.
        (*btrue, *bfalse, *ubtrue, *ubfalse): Use xtensa_emit_branch.
        (*bittrue, *bitfalse): Use xtensa_emit_bit_branch.
        (seq, sne, sgt, sge, slt, sle): Use any_scc macro.
        (movsicc_internal0, movsicc_internal1): Use xtensa_emit_movcc.
        (movsfcc_internal0, movsfcc_internal1): Likewise.
        (seq_sf, slt_sf, sle_sf): Use any_scc_sf macro.
        * config/xtensa/xtensa-protos.h: (xtensa_emit_branch): New.
        (xtensa_emit_bit_branch): New.
        (xtensa_emit_movcc): New.
        (function_arg_boundary): Add missing prototype.

2006-11-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/xtensa.md (tstsi): Delete

2006-11-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/xtensa.md (entry): Do not emit .frame directive.

2006-11-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/elf.h (HANDLE_PRAGMA_PACK_PUSH_POP): Define.

2006-11-17  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/lib1funcs.asm (__umulsidi3): Restore a0 on exit.

2006-11-17  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-vrp.c (execute_vrp): Do not update current_loops.
        * loop-unswitch.c (unswitch_loop): Do not use loop_split_edge_with.
        * doc/loop.texi: Remove documentation for cancelled functions.
        * tree-ssa-loop-im.c (loop_commit_inserts): Removed.
        (move_computations, determine_lsm): Use bsi_commit_edge_inserts
        instead.
        * cfgloopmanip.c (remove_bbs): Do not update loops explicitly.
        (remove_path): Ensure that in delete_basic_blocks, the loops
        are still allocated.
        (add_loop): Work on valid loop structures.
        (loopify): Modify call of add_loop.
        (mfb_update_loops): Removed.
        (create_preheader): Do not update loops explicitly.
        (force_single_succ_latches, loop_version): Do not use
        loop_split_edge_with.
        (loop_split_edge_with): Removed.
        * tree-ssa-loop-manip.c (create_iv, determine_exit_conditions):
        Do not use bsi_insert_on_edge_immediate_loop.
        (split_loop_exit_edge, tree_unroll_loop): Do not use
        loop_split_edge_with.
        (bsi_insert_on_edge_immediate_loop): Removed.
        * tree-ssa-loop-ch.c (copy_loop_headers): Use current_loops.  Do not
        use loop_split_edge_with.
        * cfghooks.c: Include cfgloop.h.
        (verify_flow_info): Verify that loop_father is filled iff current_loops
        are available.
        (redirect_edge_and_branch_force, split_block, delete_basic_block,
        split_edge, merge_blocks, make_forwarder_block, duplicate_block):
        Update cfg.
        * cfgloopanal.c (mark_irreducible_loops): Work if the function contains
        no loops.
        * modulo-sched.c (generate_prolog_epilog, canon_loop): Do not use
        loop_split_edge_with.
        (sms_schedule): Use current_loops.
        * tree-ssa-dom.c (tree_ssa_dominator_optimize): Use current_loops.
        * loop-init.c (loop_optimizer_init, loop_optimizer_finalize): Set
        current_loops.
        (rtl_loop_init, rtl_loop_done): Do not set current_loops.
        * tree-ssa-sink.c (execute_sink_code): Use current_loops.
        * ifcvt.c (if_convert): Ditto.
        * predict.c (predict_loops): Do not clear current_loops.
        (tree_estimate_probability): Use current_loops.
        (propagate_freq): Receive head of the region to propagate instead of
        loop.
        (estimate_loops_at_level): Do not use shared to_visit bitmap.
        (estimate_loops): New function.  Handle case current_loops == NULL.
        (estimate_bb_frequencies): Do not allocate tovisit.  Use
        estimate_loops.
        * tree-ssa-loop.c (current_loops): Removed.
        (tree_loop_optimizer_init): Do not return loops.
        (tree_ssa_loop_init, tree_ssa_loop_done): Do not set current_loops.
        * tree-vectorizer.c (slpeel_update_phi_nodes_for_guard1,
        slpeel_update_phi_nodes_for_guard2, slpeel_tree_peel_loop_to_edge):
        Do not update loops explicitly.
        * function.h (struct function): Add x_current_loops field.
        (current_loops): New macro.
        * tree-if-conv.c (combine_blocks): Do not update loops explicitly.
        * loop-unroll.c (split_edge_and_insert): New function.
        (unroll_loop_runtime_iterations, analyze_insns_in_loop): Do not
        use loop_split_edge_with.
        * loop-doloop.c (add_test, doloop_modify): Ditto.
        * tree-ssa-pre.c (init_pre, fini_pre): Do not set current_loops.
        * cfglayout.c (copy_bbs): Do not update loops explicitly.
        * lambda-code.c (perfect_nestify): Do not use loop_split_edge_with.
        * tree-vect-transform.c (vect_transform_loop): Do not update loops
        explicitly.
        * cfgloop.c (flow_loops_cfg_dump): Do not dump dfs_order and rc_order.
        (flow_loops_free): Do not free dfs_order and rc_order.
        (flow_loops_find): Do not set dfs_order and rc_order in loops
        structure.  Do not call loops and flow info verification.
        (add_bb_to_loop, remove_bb_from_loops): Check whether the block
        already belongs to some loop.
        * cfgloop.h (struct loops): Remove struct cfg.
        (current_loops, loop_split_edge_with): Declaration removed.
        (loop_optimizer_init, loop_optimizer_finalize): Declaration changed.
        * tree-flow.h (loop_commit_inserts, bsi_insert_on_edge_immediate_loop):
        Declaration removed.
        * Makefile.in (cfghooks.o): Add CFGLOOP_H dependency.
        * basic-block.h (split_edge_and_insert): Declare.
        * tree-cfg.c (remove_bb): Do not update loops explicitly.

2006-11-17  Zdenek Dvorak <dvorakz@suse.cz>

        PR tree-optimization/29801
        * tree-ssa-ccp.c (get_symbol_constant_value): New function.
        (get_default_value): Use get_symbol_constant_value.
        (set_lattice_value): ICE when the value of the constant is
        changed.
        (visit_assignment): Ignore VDEFs of read-only variables.

2006-11-17  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-vect-transform.c (vect_create_epilog_for_reduction): Fix
        formating.
        (vect_generate_tmps_on_preheader, vect_update_ivs_after_vectorizer,
        vect_gen_niters_for_prolog_loop): Fold the emited expressions.

2006-11-17  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-ssa-alias.c (new_type_alias): Do not use offset of expr to
        select subvars of var.

2006-11-17  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/29584
        * tree-ssa-forwprop.c (simplify_switch_expr): Don't
        optimize if DEF doesn't have integral type.

2006-11-16  Mike Stump  <mrs@apple.com>

        * config/darwin.h (LINK_COMMAND_SPEC): Don't do dwarf stuff on
        pre-darwin9 system, unless the user asks for it directly.
        (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config/i386/darwin.h (PREFERRED_DEBUGGING_TYPE): Likewise.
        * config.gcc: Add suppport for darwin9.h.
        * config/darwin9.h: Add.
        * doc/install.texi (Specific): Clarify darwin documentation.
        
2006-11-16  Richard Earnshaw  <rearnsha@arm.com>

        * arm.h (CONSTANT_ALIGNMENT): Don't over-align strings when
        optimizing for size.

2006-11-16  Mike Stump  <mrs@apple.com>

        * Makefile.in (targhooks.o): Add $(OPTABS_H).

2006-11-16  Dirk Mueller  <dmueller@suse.de>

        * tree-vrp.c (get_value_range): Use XCNEW instead
        of XNEW and memset.
        (insert_range_assertions): Use XCNEWVEC instead
        of XNEWVEC and memset.
        (vrp_initialize): Same.
        (vrp_finalize): Same.
        * tree-ssa-ccp.c (ccp_initialize): Same.
        * predict.c (tree_bb_level_predictions): Same.
        * calls.c (expand_call): Same.
        * tree-ssa-copy.c (init_copy_prop): Same.
        (fini_copy_prop): Same.
        * tree-ssa-alias.c (get_ptr_info): Use GGC_CNEW instead
        of GGC_NEW and memset.

2006-11-16  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/26306
        * gimplify.c (gimplify_expr): Only force a load for references to
        non-BLKmode volatile values.
        * doc/implement-c.texi (Qualifiers implementation): Document the
        interpretation of what a volatile access is.
        * doc/extend.texi (C++ Extensions): Rework same documentation.

2006-11-16  Joseph Myers  <joseph@codesourcery.com>

        * config/rs6000/spe.md (frob_di_df_2): Handle non-offsettable
        memory operand.

2006-11-16  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (abssi2): Allow Thumb as well.  Use an SImode scratch for
        Thumb.
        (arm_neg_abssi2): Renamed from neg_abssi2.
        (thumb_abssi2, thumb_neg_abssi2): New patterns with splitters.

2006-11-16  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_function_sseregparm): Fix comment:
        number of arguments passed to local functions in SSE registers is 3.

        * doc/invoke.texi (Function Attributes) [sseregparm]: Correct
        number of arguments passed in SSE registers to 3.

2006-11-16  Maxim Kuvyrkov  <mkuvyrkov@ispras.ru>

        PR target/29201
        * cfgrtl.c (rtl_delete_block): Move the code for getting last insn of
        bb to ...
        (get_last_bb_insn): ... new global function.
        (basic_block.h): Declare it.
        * haifa-sched.c (create_recovery_block): Use it.

2006-11-15  H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/29862
        * real.c (mpfr_from_real): Call mpfr_set_str before gcc_assert.

2006-11-15  Paul Brook  <paul@codesourcery.com>

        * config/arm/unwind-arm.c (_Unwind_GetDataRelBase,
        _Unwind_GetTextRelBase): Move from here ...
        * config/arm/pr-support.c (_Unwind_GetDataRelBase,
        _Unwind_GetTextRelBase): ... To here.

2006-11-15  Bernd Schmidt  <bernd.schmidt@analog.com>

        * tree-ssa-loop-ivopts.c (get_address_cost): Make sure memory
        addresses we generate for testing are aligned.

2006-11-15  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        PR tree-opt/29788
        * fold-const.c (fold_indirect_ref_1): Fold *&CONST_DECL down
        to what is the const decl is a place holder for.

2006-11-15  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.opt: New target option -mx87regparm.

        * config/i386/i386.h (struct ix86_args): Add x87_nregs, x87_regno
        and float_in_x87 variables. mmx_words, sse_words: Remove.
        (X87_REGPARM_MAX): Define.

        * config/i386/i386.c (override_options): Error out for
        -mx87regparm but no 80387 support.
        (ix86_attribute_table): Add x87regparm.
        (ix86_handle_cconv_attribute): Update comments for x87regparm.
        (ix86_comp_type_attributes): Check for mismatched x87regparm types.
        (ix86_function_x87regparm): New function.
        (ix86_function_arg_regno_p): Add X87_REGPARM_MAX 80387 floating
        point registers.
        (init_cumulative_args): Initialize x87_nregs and float_in_x87
        variables.
        (function_arg_advance): Process x87_nregs and x87_regno when
        floating point argument is to be passed in 80387 register.
        (function_arg): Pass XFmode arguments in 80387 registers for local
        functions.  Pass SFmode and DFmode arguments to local functions
        in 80387 registers when flag_unsafe_math_optimizations is set.

        * reg-stack.c (convert_regs_entry): Disable NaN load for
        stack registers that are used for argument passing.

        * doc/extend.texi: Document x87regparm function attribute.
        * doc/invoke.texi: Document -mx87regparm.

2006-11-15  Bernd Schmidt  <bernd.schmidt@analog.com>

        * tree-flow.h (multiplier_allowed_in_address_p): Adjust prototype.
        * tree-ssa-loop-ivopts.c (multiplier_allowed_in_address_p): New
        arg MODE; all callers changed.  Use it to determine validity per
        machine mode instead of using Pmode for all memory references.
        (get_address_cost): Likewise add and use new arg MEM_MODE.

2006-11-15  Rask Ingemann Lambertsen <rask@sygehus.dk>
            J"orn Rennecke <joern.rennecke@st.com>

        * combine.c (likely_spilled_retval_1): Fix masking operation.
        (likely_spilled_retval_p): Use proper pattern for call to
        likely_spilled_retval_1.

2006-11-15  Bernd Schmidt  <bernd.schmidt@analog.com>

        * tree-ssa-loop-ivopts.c (determine_iv_costs): Fix formatting.

        * config/bfin/bfin.c (legitimize_pic_address): Lose dead code
        that tests for CONSTANT_POOL_ADDRESS_P.

2006-11-15  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/29581
        * lambda-code.c (replace_uses_equiv_to_x_with_y): Add YINIT,
        REPLACEMENTS, FIRSTBSI arguments.  If initial condition or
        type is different between Y and USE, create a temporary
        variable, initialize it at the beginning of the body bb
        and use it as replacement instead of Y.

2006-11-15  Paolo Bonzini  <bonzini@gnu.org>

        PR middle-end/29753
        * gimplify.c (fold_indirect_ref_rhs): Use
        STRIP_USELESS_TYPE_CONVERSION rather than STRIP_NOPS.

2006-11-14  Richard Earnshaw  <rearnsha@arm.com>

        * expmed.c (emit_store_flag_1): New function.
        (emit_store_flag): Call it.  If we can't find a suitable scc insn,
        try a cstore insn.
        * expr.c (do_store_flag): If we can't find a scc insn, try cstore.
        Use do_compare_rtx_and_jump.
        * arm.h (BRANCH_COST): Increase to 2 on Thumb.
        * arm.md (cstoresi4): New define_expand.
        (cstoresi_eq0_thumb, cstoresi_ne0_thumb): Likewise.
        (cstoresi_eq0_thumb_insn, cstore_ne0_thumb_insn): New patterns.
        (cstoresi_nltu_thumb, thumb_addsi3_addgeu): New patterns.

2006-11-14  Caroline Tice  <ctice@apple.com>
                
        * dwarf2out.c (debug_pubtypes_section): New static global variable.
        (pubname_entry):  Add DEF_VEC_O and DEF_VEC_ALLOC_O statements for
        this type.
        (pubname_table):  Redefine as a vector.
        (pubtype_table):  New static global variable, defined as a vector.
        (pubname_table_allocated): Remove static global variable.
        (pubname_table_in_use): Remove static global variable.
        (PUBNAME_TABLE_INCREMENT): Remove constant.
        (size_of_pubnames): Add parameter to deal with either pubnames or 
        pubtypes, and change code to deal with table being a vector.
        (add_pubname):  Change to deal with table being a vector.
        (add_pubtype):  New function.
        (output_pubnames): Add parameter to deal with either pubnames or 
        pubtypes, and change code to deal with table being a vector.
        (gen_array_type_die):  Add call to add_pubtype.
        (gen_enumeration_type_die): Add call to add_pubtype.
        (gen_struct_or_union_type_die): Add call to add_pubtype.
        (gen_subroutine_type_die): Add call to add_pubtype.
        (gen_typedef_die):  Add call to add_pubtype.
        (dwarf2out_init): Add code to initialize pubname_table and 
        pubtype_table vectors; also initialize debug_pubtypes_section.
        (prune_unused_types):  Change to deal with pubnames being a vector.
        (dwarf2out_finish): Change to deal with pubnames being a vector; add 
        pubnames table to call to output_pubnames;  Add code to output pubtypes 
        table if DEBUG_PUBTYPES_SECTION is defined.
        * config/darwin.c (darwin_file_start):  Add DEBUG_PUBTYPES_SECTION to 
        debugnames.
        * config/darwin.h (DEBUG_PUBTYPES_SECTION): Define new global variable.

2006-11-14  Joseph Myers  <joseph@codesourcery.com>

        * config/arm/arm.h (FUNCTION_ARG_ADVANCE): Only adjust
        iwmmxt_nregs if TARGET_IWMMXT_ABI.
        * config/arm/iwmmxt.md (movv8qi_internal, movv4hi_internal,
        movv2si_internal): Support moves between core registers.

2006-11-14  Eric Christopher  <echristo@apple.com>

        * configure: Regenerate with autoconf 2.59.

2006-11-14  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR tree-optimization/27755

        * tree-ssa-pre.c: Update comments.
        (bb_bitmap_sets): Add pa_in and  deferred member.
        (BB_DEFERRED): New macro.
        (maximal_set): New variable.
        (pre_stats): Add pa_insert member.
        (bitmap_set_and): Short circuit orig == dest.
        (bitmap_set_subtract_values): New function.
        (bitmap_set_contains_expr): Ditto.
        (translate_vuses_through_block): Add phiblock argument.
        (dependent_clean): New function.
        (compute_antic_aux): Update for maximal_set changes.
        (compute_partial_antic_aux): New function.
        (compute_antic): Handle partial anticipation.
        (do_partial_partial_insertion): New function.
        (insert_aux): Handle partial anticipation.
        (add_to_sets): Add to maximal set.
        (compute_avail): Ditto.
        (init_pre): Initialize maximal_set.
        (execute_pre): Do partial anticipation if -O3+.

2006-11-14  Paolo Bonzini  <bonzini@gnu.org>

        PR rtl-optimization/29798

        * fwprop.c (use_killed_between): Check that DEF_INSN dominates
        TARGET_INSN before any other check.
        (fwprop_init): Always calculate dominators.
        (fwprop_done): Always free them.

2006-11-14  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * fold-const.c (fold_strip_sign_ops): Handle COMPOUND_EXPR and
        COND_EXPR.

2006-11-13  DJ Delorie  <dj@redhat.com>

        * config/m32c/m32c.c (m32c_prepare_shift): Use a separate
        temporary for intermediates.

2006-11-13  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (expand_cbranchdi4): Initialize skip_label.
        (sh_optimize_target_register_callee_saved): #if 0 the code
        using NOTE_INSN_LOOP_{BEG,END}.

2006-11-13  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (optimize_bit_field_compare): Recursively call
        fold when simplifying non-constant comparisons between bit-fields.

2006-11-13  Jakub Jelinek  <jakub@redhat.com>

        * configure.ac: Add changequote around __LONG_DOUBLE_MATH_OPTIONAL
        test.
        * configure: Rebuilt.

2006-11-13  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        * config/rs6000/cell.md: New file.
        * config/rs6000/rs6000.c (rs6000_cell_dont_microcode): New
        variable.
        (ppccell_cost): New cost matrix.
        (TARGET_SCHED_FIRST_CYCLE_MULTIPASS_DFA_LOOKAHEAD_GUARD): Define.
        (rs6000_override_options): Set rs6000_always_hint to false
        for cell. Also align functions/lables/loops to 8byte
        for the Cell. Use PROCESSOR_CELL.
        (rs6000_emit_epilogue): Rename using_mfcr_multiple to
        using_mtcr_multiple.
        (rs6000_variable_issue): If the insn is a nonpipelined instruction
        on the Cell, return 0.
        (rs6000_adjust_cost): Add Cell cost adjustments.
        (is_microcoded_insn): Return true for Cell microcoded
        instructions.
        (is_nonpipeline_insn): New function.
        (rs6000_issue_rate): Add PROCESSOR_CELL.
        (rs6000_use_sched_lookahead): If Cell, then we should look ahead 8
        instructions.
        (rs6000_use_sched_lookahead_guard): New function.
        (rs6000_sched_reorder):  Reorder the ready list, if the second
        to last ready insn is a nonepipeline insn on the Cell.
        * config/rs6000/rs6000.h (processor_type): Add PROCESSOR_CELL.
        (ASM_CPU_SPEC): Add Cell.
        * config/rs6000/rs6000.md (cpu): Add Cell.
        (cell_micro): New Attr.
        Include cell.md

2006-11-13  Jakub Jelinek  <jakub@redhat.com>

        * configure.ac (ld_vers): Parse GNU ld version 2.17.50.0.3-6 20060715
        style versions.
        * configure: Rebuilt.

2006-11-13  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386.c (ix86_expand_lround): Handle expand_simple_binop
        return value.
        (ix86_expand_lfloorceil): Likewise.
        (ix86_expand_rint): Likewise.
        (ix86_expand_floorceildf_32): Likewise.
        (ix86_expand_floorceil): Likewise.
        (ix86_expand_rounddf_32): Likewise.
        (ix86_expand_truncdf_32): Likewise.
        (ix86_expand_round): Likewise.

2006-11-13  Carlos O'Donell  <carlos@codesourcery.com>
            Mark Mitchell  <mark@codesourcery.com>

        * gcc.c: Organize search path variables into $prefix relative,
        and well-known native. Add comments.
        (add_sysrooted_prefix): Add comment.
        (process_command): If !gcc_exec_prefix add $prefix based paths.
        If *cross_compile == '0', add native well-known paths.
        Assert tooldir_base_prefix is always relative.
        (main): If print_search_dirs, and if gcc_exec_prefix is set,
        use this value for 'install:' path.
        * Makefile.in: Add GCC_EXEC_PREFIX to generated site.exp.

2006-11-13  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c: Fix a typo in comment.

2006-11-13  Michael Matz  <matz@suse.de>

        * genemit.c (gen_expand): Allocate enough memory.

2006-11-13  Joseph Myers  <joseph@codesourcery.com>

        * config/arm/bpapi.h (TARGET_BPABI_CPP_BUILTINS): Define
        __GXX_TYPEINFO_EQUALITY_INLINE but not
        __GXX_MERGED_TYPEINFO_NAMES.
        * config/arm/symbian.h (TARGET_OS_CPP_BUILTINS): Define
        __GXX_MERGED_TYPEINFO_NAMES.
        * config/i386/cygming.h (TARGET_OS_CPP_BUILTINS): Define
        __GXX_TYPEINFO_EQUALITY_INLINE.

2006-11-13  H.J. Lu  <hongjiu.lu@intel.com>
            Zdenek Dvorak <dvorakz@suse.cz>

        PR tree-optimization/29680
        * tree-ssa-operands.c (access_can_touch_variable): Revert fix for
        PR 14784.

2006-11-12  Jason Merrill  <jason@redhat.com>
            Andrew Pinski <pinskia@physics.uc.edu>

        PR middle-end/28915
        * gimplify.c (gimplify_init_constructor): Don't reduce TREE_CONSTANT
        vector ctors.
        * tree-cfg.c (verify_expr): Don't look into TREE_CONSTANT
        vector ctors.
        * expmed.c (make_tree): Handle CONST, SYMBOL_REF.
        * tree.c (build_vector): Handle non-_CST elements.

2006-11-12  Kaz Kojima  <kkojima@gcc.gnu.org>

        * genemit.c (gen_insn): Call gen_exp with a non-null used
        when handling multiple insns.
        (gen_expand): Likewise.
        * reorg.c (emit_delay_sequence): Copy the delay slot insn.
        * config/sh/sh.md (ashrsi2_31+1): Copy operands[0].
        (movsi_const_16bit+1): Copy operands[1].
        (call_pcrel): Copy the call_site pattern.
        (call_value_pcrel, sibcall_pcrel, GOTaddr2picreg): Likewise.

2006-11-12  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (negate_expr_p) <PLUS_EXPR, MINUS_EXPR>: Correct/refine
        condition for transformations.  Use !HONOR_SIGN_DEPENDENT_ROUNDING
        && !HONOR_SIGNED_ZEROS instead of flag_unsafe_math_optimizations.
        (fold_negate_expr) <PLUS_EXPR, MINUS_EXPR>: Likewise.

2006-11-12  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR tree-optimization/29587
        * tree-ssa-structalias.c (process_constraint): Don't
        mark address taken due only to escaped vars constraint.

2006-11-12  Michael Matz  <matz@suse.de>
            Roger Sayle  <roger@eyesopen.com>

        PR rtl-optimization/29797
        * ifcvt.c (noce_try_bitop): Correct calculation of bitnum on
        BITS_BIG_ENDIAN targets.

2006-11-12  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (fold_builtin_cosh): New.
        (fold_builtin_1): Use it.
        * fold-const.c (negate_mathfn_p): Add llround, lround, round,
        trunc to the list of "odd" functions.  Also add llrint, lrint,
        rint and nearbyint when flag_rounding_math is false.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-flow.h (name_mappings_registered_p): Declare.
        * tree-into-ssa.c (name_mappings_registered_p): New function.
        * tree-cfg.c (tree_can_merge_blocks_p): Check
        name_mappings_registered_p instead of need_ssa_update_p.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-ssa-loop.c (tree_vectorize): Return the result of
        vectorize_loops.
        * tree-vectorizer.c (vectorize_loops): Return TODO_cleanup_cfg
        if anything changed.
        * tree-vectorizer.h (vectorize_loops): Declaration removed.
        * tree-flow.h (vectorize_loops): Declaration changed.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-ssa-loop-prefetch.c (schedule_prefetches): Cleanup and improve
        comments.
        (issue_prefetch_ref): Move assignment to write_p out of loop.
        (determine_unroll_factor): Do not take PARAM_MAX_UNROLL_TIMES and
        SIMULTANEOUS_PREFETCHES into account.
        (loop_prefetch_arrays): Do not pass ahead to determine_unroll_factor.
        * lambda-code.c (lcm): Renamed to ...
        (least_common_multiple): ... and exported.
        * tree-flow.h (least_common_multiple): Declare.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * Makefile.in (tree-data-ref.o): Add langhooks.h dependency.
        * tree-ssa-loop-niter.c (derive_constant_upper_bound):  Follow
        ud-chains.  Handle AND_EXPR.
        (record_estimate): Record whether the estimate is realistic
        and whether it is derived from a loop exit.
        (record_nonwrapping_iv, idx_infer_loop_bounds, infer_loop_bounds_from_ref,
        infer_loop_bounds_from_array, infer_loop_bounds_from_signedness): New
        functions.
        (compute_estimated_nb_iterations): Take only realistic bounds into
        account.  Set estimate_state.  Use double_ints.
        (infer_loop_bounds_from_undefined): Call infer_loop_bounds_from_array
        and infer_loop_bounds_from_signedness.  Do not consider basic blocks
        that do not have to be always executed.
        (estimate_numbers_of_iterations_loop): Set estimate_state, and use it
        to determine whether to call infer_loop_bounds_from_undefined
        and compute_estimated_nb_iterations.
        (n_of_executions_at_most): Use double_ints.
        (free_numbers_of_iterations_estimates_loop): Set estimate_state.
        (substitute_in_loop_info): Do not replace in estimated_nb_iterations.
        * double-int.c (double_int_to_tree): Improve comment.
        (double_int_fits_to_tree_p): New function.
        * double-int.h (double_int_fits_to_tree_p): Declare.
        * tree-data-ref.c: Include langhooks.h.
        (estimate_niter_from_size_of_data, estimate_iters_using_array): Removed.
        (analyze_array_indexes): Do not call estimate_niter_from_size_of_data.
        (analyze_array): Do not pass estimate_only argument to
        analyze_array_indexes.
        (get_number_of_iters_for_loop): Build tree from the stored double_int
        value.
        (get_references_in_stmt, find_data_references_in_stmt): New functions.
        (find_data_references_in_loop): Use find_data_references_in_stmt.
        * tree-data-ref.h (struct data_ref_loc_d): New.
        (get_references_in_stmt): Declare.
        (estimate_iters_using_array): Declaration removed.
        * cfgloop.h (struct nb_iter_bound): Change type of bound to
        double_int.  Improve comments.  Add is_exit and realistic
        fields.
        (struct loop): Changed type of estimated_nb_iterations to double_int.
        Added estimate_state field.
        (record_estimate): Declaration removed.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * params.c (set_param_value): Initialize the "set" field.
        * params.h (struct param_info): Add "set" field.
        (PARAM_SET_P): New macro.
        (PREFETCH_LATENCY, SIMULTANEOUS_PREFETCHES, L1_CACHE_SIZE,
        L1_CACHE_LINE_SIZE): New macros.
        * toplev.c (DEFPARAM): Initialize the "set" field.
        * tree-ssa-loop-prefetch.c (PREFETCH_LATENCY,
        SIMULTANEOUS_PREFETCHES): Removed.
        (PREFETCH_BLOCK): Use L1_CACHE_LINE_SIZE.
        (tree_ssa_prefetch_arrays): Dump the values of the parameters.
        * config/sparc/sparc.c: Include params.h.
        (sparc_override_options): Set SIMULTANEOUS_PREFETCHES and
        L1_CACHE_LINE_SIZE parameters.
        * config/sparc/sparc.h (PREFETCH_BLOCK, SIMULTANEOUS_PREFETCHES):
        Removed.
        * config/i386/i386.h (PREFETCH_BLOCK, SIMULTANEOUS_PREFETCHES):
        Removed.
        * config/i386/i386.c: Include params.h.
        (k8_cost): Change default value for SIMULTANEOUS_PREFETCHES.
        (override_options): Set SIMULTANEOUS_PREFETCHES and
        L1_CACHE_LINE_SIZE parameters.
        * config/sh/sh.h (SIMULTANEOUS_PREFETCHES): Removed.
        (OPTIMIZATION_OPTIONS): Set SIMULTANEOUS_PREFETCHES and
        L1_CACHE_LINE_SIZE parameters.
        * config/ia64/ia64.c (ia64_optimization_options): Set
        SIMULTANEOUS_PREFETCHES and L1_CACHE_LINE_SIZE parameters.
        * config/ia64/ia64.h (SIMULTANEOUS_PREFETCHES, PREFETCH_BLOCK):
        Removed.
        * params.def (PARAM_PREFETCH_LATENCY, PARAM_SIMULTANEOUS_PREFETCHES,
        PARAM_L1_CACHE_SIZE, PARAM_L1_CACHE_LINE_SIZE): New params.
        * doc/invoke.texi: Document new params.

2006-11-12  Roger Sayle  <roger@eyesopen.com>

        PR tree-optimization/13827
        * fold-const.c (fold_binary) <EQ_EXPR, NE_EXPR>: Fold (X&C) op (Y&C)
        as ((X^Y)&C) op 0.

2006-11-12  Zdenek Dvorak <dvorakz@suse.cz>

        * cfgloopmanip.c (update_single_exit_for_duplicated_loop,
        update_single_exit_for_duplicated_loops): New functions.
        (duplicate_loop_to_header_edge): Use
        update_single_exit_for_duplicated_loops.
        * tree-ssa-loop-manip.c (tree_unroll_loop): Call verification
        functions only with ENABLE_CHECKING.

2006-11-12  Andreas Schwab  <schwab@suse.de>

        * except.c (sjlj_emit_function_enter): Remove unused variable.

2006-11-11  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (int_binop_types_match_p): New function.
        (size_binop): Relax constraint that both arguments must both have
        exactly the same sizetype type.  Instead use int_binop_types_match_p.
        (size_diffop): Likewise.

        (make_range): Use build_int_cst instead of fold_convert.
        (fold_cond_expr_with_comparison): Use build_int_cst to construct
        integer constants of the correct type.
        (fold_div_compare): Likewise.
        (fold_single_bit_test): Likewise.
        (fold_binary): Likewise.
        * stor-layout.c (layout_type) <VECTOR_TYPE>: Ensure that TYPE_SIZE
        has type bitsizetype and TYPE_SIZE_UNIT has type sizetype.

2006-11-11  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        PR rtl-opt/28812
        * alias.c (fixed_scalar_and_varying_struct_p): Don't return a
        non null value if the struct memory access is in the 0th
        aliasing set.

2006-11-12  Jie Zhang  <jie.zhang@analog.com>

        Revert
        2006-11-11  Jie Zhang  <jie.zhang@analog.com>
        * config/bfin/bfin.h (TARGET_CPU_CPP_BUILTINS): Define __bfin__
        and __BFIN__.

        * config/bfin/bfin.h (TARGET_CPU_CPP_BUILTINS): Use builtin_define_std
        instead of builtin_define for bfin and BFIN.

2006-11-11  Jie Zhang  <jie.zhang@analog.com>

        * config/bfin/bfin.h (TARGET_CPU_CPP_BUILTINS): Define __bfin__
        and __BFIN__.

2006-11-11  Jan Hubicka  <jh@suse.cz>

        * extended.texi (__builtin_expect): We no longer require second argument
        to be constant.
        * gengtype.c (adjust_field_rtx_def): Drop NOTE_INSN_EXPECTED_VALUE.
        * builtins.c (expand_builtin_expect): Simplify.
        (expand_builtin_expect_jump): Kill.
        * final.c (final_scan_insn): Do not skip the removed notes.
        * insn-notes.def (LOOP_BEG, LOOP_END, REPEATED_LINE_NUMBER,
        EXPECTED_VALUE): Remove.
        * dojump.c (do_jump): Do not care about __builtin_expect.
        * predict.c (expected_value_to_br_prob): Kill.
        * function.c (expand_function_end): Do not expand
        NOTE_INSN_REPEATED_LINE_NUMBER.
        * print-rtl.c (print_rtx): Do not pretty print the removed notes.
        * expect.c (sjlj_emit_function_enter): Emit directly branch probability.
        * cfgexpand.c (add_reg_br_prob_note): Export.
        * cfgcleanup.c (rest_of_handle_jump2): Do not call
        expected_value_to_br_prob.
        * cfglayout.c (duplicate_insn_chain): Do not deal with removed notes.
        * rtl.h (add_reg_br_prob_note): Declare.

2006-11-11  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * tree-pretty-print.c (dump_generic_node): Print sign of Inf.

2006-11-11  Jan Hubicka  <jh@suse.cz>

        * predict.c (predict_loops): Kill RTL variant.

2006-11-11  Jan Hubicka  <jh@suse.cz>

        * tree-pass.h (pass_purge_lineno_notes): Remove declaration.
        * modulo-sched.c (find_line_note): Remove.
        (loop_canon_p): Do not worry about line number notes.
        (sms_schedule): Likewise.
        * cse.c (cse_main): Likewise.
        * regmove.c (fixup_match_1): Likewise
        * function.c (emit_return_info_block): Likewise.
        (expand_function_end): Likewise.
        (thread_prologue_an_epilogue_insns): Likewise.
        * cfgrtl.c (try_redirect_by_replacing_jump, rtl_tidy_fallthru_edge):
        Likewise.
        * emit-rtl.c (find_line_note, emit_insn_after_with_line_notes,
        emit_note_copy_after): Kill.
        (emit_note_copy): Do not worry about line numbers.
        * jump.c (purge_line_number_notes): Kill.
        (pass_purge_lineno_notes): Kill.
        * cfgcleanup.c (rest_of_handle_jump2): Kill purge_line_number_notes
        call.
        * rtl.h (emit_note_copy_after, emit_insn_after_with_line_notes): Kill.
        * passes.c (init_optimization_passes): Don't purge_lineno_notes.
        * sched-ebb.c (schedule_ebbs): Don't do rm_redundant_line_notes.
        * tree-pass.h (pass_purge_lineno_notes): Kill.
        * sched-ebb.c (schedule_ebb): Don't rm_line_notes,
        rm_redundant_line_notes.
        * sched-rgb.c (schedule_region): Don't rm_line_notes,
        rm_redundant_line_notes.
        * sched-int.h (rm_line_notes, rm_redundant_line_notes): Kill.
        * haifa-sched.c: Update comment about handling notes.
        (unlink_line_notes): Kill.
        (rm_line_notes): Kill.
        (save_line_notes): Simplify.
        (rm_redundant_line_notes): Kill.

2006-11-11  Richard Guenther  <rguenther@suse.de>

        * tree.def (FIX_CEIL_EXPR, FIX_FLOOR_EXPR, FIX_ROUND_EXPR):
        Remove unused tree codes.
        * tree-vrp.c (extract_range_from_unary_expr): Remove handling
        of FIX_CEIL_EXPR, FIX_FLOOR_EXPR and FIX_ROUND_EXPR.
        * tree-pretty-print.c (dump_generic_node, op_prio): Likewise.
        * tree.c (stabilize_reference): Likewise.
        * fold-const.c (fold_convert_const_int_from_real, operand_equal_p,
        fold_unary): Likewise.
        * tree-gimple.c (is_gimple_cast): Likewise.
        * dwarf2out.c (loc_descriptor_from_tree_1): Likewise.
        * expr.c (expand_expr_real_1): Likewise.
        * tree-eh.c (tree_could_trap_p): Likewise.
        * gimplify.c (gimplify_expr): Likewise.
        * tree-inline.c (estimate_num_insns_1): Likewise.
        * tree-cfg.c (verify_expr): Likewise.

2006-11-11  Zdenek Dvorak <dvorakz@suse.cz>

        * tree-ssa-loop.c (pass_loop_prefetch): Change name to aprefetch.
        * tree-ssa-loop-prefetch.c (dump_mem_ref): Fix target file.
        (tree_ssa_prefetch_arrays): Do not dump for removed loops.

2006-11-11  Richard Sandiford  <richard@codesourcery.com>

        PR middle-end/27528
        * stmt.c (expand_asm_operands): Use EXPAND_INITIALIZER if the
        constraints accept neither registers or memories.

2006-11-11  Jie Zhang  <jie.zhang@analog.com>

        * config/bfin/bfin.h (FUNCTION_PROFILER): Don't use LABELNO.
        (NO_PROFILE_COUNTERS): Define as 1.

2006-11-10  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (operand_equal_p) <INTEGER_CST, REAL_CST, VECTOR_CST>:
        Don't check for TREE_CONSTANT_OVERFLOW when comparing constants.

2006-11-10  Peter Bergner  <bergner@vnet.ibm.com>

        * rtl.h (MEM_COPY_ATTRIBUTES): Copy MEM_POINTER.

2006-11-10  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (fold_builtin_cos): Use fold_strip_sign_ops().
        (fold_builtin_hypot): Likewise.
        * fold-const.c (fold_strip_sign_ops): Handle "odd" builtins.

        * fold-const.c (negate_mathfn_p): Add BUILT_IN_ERF.

2006-11-10  Roger Sayle  <roger@eyesopen.com>

        * tree.c (build_int_cst_wide): Add an assertion (gcc_unreachable)
        when attempting to build INTEGER_CSTs of non-integral types.
        * expmed.c (make_tree): Use the correct type, i.e. the inner
        type, when constructing the individual elements of a CONST_VECTOR.

2006-11-10  Jan Hubicka  <jh@suse.cz>

        * cse.c (cse_process_notes): Copy the propagated value.
        * local-alloc.c (update_equiv_regs): Copy the memory RTX to be used
        in REG_EQUIV notes.
        * gcse.c (try_replace_reg): Copy the replacement.
        * i386.c (emit_i387_cw_initialization): Copy stored_mode.
        (assign_386_stack_local): Always return copied memory expression
        * function.c (instantiate_virtual_regs_in_insn): Copy the operand
        duplicates.

2006-11-10  Jan Hubicka  <jh@suse.cz>

        * final.c (final): Walk from first instruction.
        * cfglayout.c (insn_locators_initialize): Remove line number notes.

2006-11-10  Uros Bizjak  <ubizjak@gmail.com>

        PR target/29777
        * config/i386/sse.md (smulv8hi3_highpart): Change from define_insn
        to define_expand.
        (umulv8hi3_highpart): Ditto.
        (vec_widen_smult_hi_v8hi): New expander.
        (vec_widen_smult_lo_v8hi): Ditto.

2006-11-09  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (do_mpfr_arg3): New.
        (fold_builtin_1): Handle builtins fma, fmin and fmax.

2006-11-09  Eric Christopher  <echristo@apple.com>

        PR bootstrap/26892
        PR bootstrap/27814
        PR other/28994
        * configure.ac: Match powerpc*-*-darwin* for powerpc darwin checks.
        * config.gcc (powerpc64-*-darwin*): New target.
        * config.host: Ditto.
        * config/rs6000/darwin64.h: New file.
        * config/rs6000/x-darwin64: Ditto.
        * config/rs6000/host-ppc64-darwin.c: Ditto.

2006-11-09  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/ia64.c (ia64_hpux_init_libfuncs):  Use HP-UX millicode
        routines for integer division.

2006-11-09  Daniel Jacobowitz  <dan@codesourcery.com>

        * config/arm/t-linux (LIBGCC2_DEBUG_CFLAGS): Delete.

2006-11-09  Serge Belyshev  <belyshev@depni.sinp.msu.ru>

        PR middle-end/29726
        * fold-const.c (fold_binary) <EQ_EXPR>: Fix typo in variable name.

2006-11-09  Andreas Krebbel  <krebbel1@de.ibm.com>

        * simplify-rtx.c (avoid_constant_pool_reference): Avoid calling
        simplify_subreg with BLKmode outer mode.

2006-11-08  Brooks Moses  <brooks.moses@codesourcery.com>

        * doc/invoke.texi: Minor formatting fixes in option lists.

2006-11-08  Zdenek Dvorak <dvorakz@suse.cz>

        PR tree-optimization/29738
        * tree-ssa-ccp.c: Remove UNKNOWN_VAL from comments.
        (ccp_lattice_t): Remove UNKNOWN_VAL.
        (dump_lattice_value, ccp_lattice_meet, ccp_visit_phi_node):
        Do not handle UNKNOWN_VAL.
        (get_default_value): Set initial value of virtual operands to
        VARYING.
        (get_value): Always use get_default_value on uninitialized
        operands.
        (set_value_varying, surely_varying_stmt_p): New functions.
        (set_lattice_value): Do not pass argument to get_value.
        Do not handle UNKNOWN_VAL.
        (likely_value): Follow the semantics described in the comment.
        (ccp_initialize): Use surely_varying_stmt_p.  Do not mark
        phi nodes DONT_SIMULATE_AGAIN.
        (ccp_fold): Do not pass argument to get_value.
        (fold_const_aggregate_ref, visit_assignment): Ditto.  Do not
        handle UNKNOWN_VAL.

2006-11-08  Andrew Pinski  <Andrew_Pinski@playstation.sony.com>

        * tree-pretty-print.c (dump_generic_node) <INTEGER_CST>: Use
        HOST_WIDE_INT_PRINT_DOUBLE_HEX instead of format buffer.

2006-11-08  Roger Sayle  <roger@eyesopen.com>

        * tree-ssa-propagate.c (set_rhs): Restructure validity tests as a
        test for inclusion rather than as a test for exclusion.
        * tree-ssa-ccp.c (fold_stmt_r) <COND_EXPR>: Use set_rhs to modify
        the condition after calling fold_binary.
        * fold-const.c (fold_inf_compare): Remove in_gimple_form check.
        (fold_binary) <LT_EXPR, GT_EXPR, LE_EXPR, GE_EXPR>: Likewise.
        * builtins.c (fold_builtin_isascii): Likewise.
        (fold_builtin_isdigit): Likewise.

2006-11-08  Carlos O'Donell  <carlos@codesourcery.com>

        * configure.ac: Do not set PREFIX_INCLUDE_DIR if $prefix is NONE.
        * configure: Regenerate.

2006-11-08  Dorit Nuzman  <dorit@il.ibm.com>

        * tree-vect-analyze.c (vect_mark_relevant, vect_stmt_relevant_p): Take
        enum argument instead of bool.
        (vect_analyze_operations): Call vectorizable_type_promotion.
        * tree-vectorizer.h (type_promotion_vec_info_type): New enum
        stmt_vec_info_type value.
        (supportable_widening_operation, vectorizable_type_promotion): New
        function declarations.
        * tree-vect-transform.c (vect_gen_widened_results_half): New function.
        (vectorizable_type_promotion): New function.
        (vect_transform_stmt): Call vectorizable_type_promotion.
        * tree-vect-analyze.c (supportable_widening_operation): New function.
        * tree-vect-patterns.c (vect_recog_dot_prod_pattern):
        Add implementation.
        * tree-vect-generic.c (expand_vector_operations_1): Consider correct
        mode.

        * tree.def (VEC_WIDEN_MULT_HI_EXPR, VEC_WIDEN_MULT_LO_EXPR):
        (VEC_UNPACK_HI_EXPR, VEC_UNPACK_LO_EXPR): New tree-codes.
        * tree-inline.c (estimate_num_insns_1): Add cases for above new
        tree-codes.
        * tree-pretty-print.c (dump_generic_node, op_prio): Likewise.
        * expr.c (expand_expr_real_1): Likewise.
        * optabs.c (optab_for_tree_code): Likewise.
        (init_optabs): Initialize new optabs.
        * genopinit.c (vec_widen_umult_hi_optab, vec_widen_smult_hi_optab,
        vec_widen_smult_hi_optab, vec_widen_smult_lo_optab,
        vec_unpacks_hi_optab, vec_unpacks_lo_optab, vec_unpacku_hi_optab,
        vec_unpacku_lo_optab): Initialize new optabs.
        * optabs.h (OTI_vec_widen_umult_hi, OTI_vec_widen_umult_lo):
        (OTI_vec_widen_smult_h, OTI_vec_widen_smult_lo, OTI_vec_unpacks_hi,
        OTI_vec_unpacks_lo, OTI_vec_unpacku_hi, OTI_vec_unpacku_lo): New
        optab indices.
        (vec_widen_umult_hi_optab, vec_widen_umult_lo_optab):
        (vec_widen_smult_hi_optab, vec_widen_smult_lo_optab):
        (vec_unpacks_hi_optab, vec_unpacku_hi_optab, vec_unpacks_lo_optab):
        (vec_unpacku_lo_optab): New optabs.
        * doc/md.texi (vec_unpacks_hi, vec_unpacks_lo, vec_unpacku_hi):
        (vec_unpacku_lo, vec_widen_umult_hi, vec_widen_umult_lo):
        (vec_widen_smult_hi, vec_widen_smult_lo): New.
        * doc/c-tree.texi (VEC_LSHIFT_EXPR, VEC_RSHIFT_EXPR):
        (VEC_WIDEN_MULT_HI_EXPR, VEC_WIDEN_MULT_LO_EXPR, VEC_UNPACK_HI_EXPR):
        (VEC_UNPACK_LO_EXPR, VEC_PACK_MOD_EXPR, VEC_PACK_SAT_EXPR): New.

        * config/rs6000/altivec.md (UNSPEC_VMULWHUB, UNSPEC_VMULWLUB):
        (UNSPEC_VMULWHSB, UNSPEC_VMULWLSB, UNSPEC_VMULWHUH, UNSPEC_VMULWLUH):
        (UNSPEC_VMULWHSH, UNSPEC_VMULWLSH): New.
        (UNSPEC_VPERMSI, UNSPEC_VPERMHI): New.
        (vec_vperm_v8hiv4si, vec_vperm_v16qiv8hi): New patterns used to
        implement the unsigned unpacking patterns.
        (vec_unpacks_hi_v16qi, vec_unpacks_hi_v8hi, vec_unpacks_lo_v16qi):
        (vec_unpacks_lo_v8hi): New signed unpacking patterns.
        (vec_unpacku_hi_v16qi, vec_unpacku_hi_v8hi, vec_unpacku_lo_v16qi):
        (vec_unpacku_lo_v8hi): New unsigned unpacking patterns.
        (vec_widen_umult_hi_v16qi, vec_widen_umult_lo_v16qi):
        (vec_widen_smult_hi_v16qi, vec_widen_smult_lo_v16qi):
        (vec_widen_umult_hi_v8hi, vec_widen_umult_lo_v8hi):
        (vec_widen_smult_hi_v8hi, vec_widen_smult_lo_v8hi): New widening
        multiplication patterns.

        * target.h (builtin_mul_widen_even, builtin_mul_widen_odd): New.
        * target-def.h (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN):
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): New.
        * config/rs6000/rs6000.c (rs6000_builtin_mul_widen_even): New.
        (rs6000_builtin_mul_widen_odd): New.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): Defined.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): Defined.
        * tree-vectorizer.h (enum vect_relevant): New enum type.
        (_stmt_vec_info): Field relevant chaned from bool to enum
        vect_relevant.
        (STMT_VINFO_RELEVANT_P): Updated.
        (STMT_VINFO_RELEVANT): New.
        * tree-vectorizer.c (new_stmt_vec_info): Use STMT_VINFO_RELEVANT
        instead of STMT_VINFO_RELEVANT_P.
        * tree-vect-analyze.c (vect_mark_relevant, vect_stmt_relevant_p):
        Replace calls to STMT_VINFO_RELEVANT_P with STMT_VINFO_RELEVANT,
        and boolean variable with enum vect_relevant.
        (vect_mark_stmts_to_be_vectorized): Likewise + update documentation.
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_EVEN): New.
        (TARGET_VECTORIZE_BUILTIN_MUL_WIDEN_ODD): New.

        2006-11-08  Richard Henderson  <rth@redhat.com>

        * config/i386/sse.md (vec_widen_umult_hi_v8hi,
        vec_widen_umult_lo_v8hi): New.
        (vec_widen_smult_hi_v4si, vec_widen_smult_lo_v4si,
        vec_widen_umult_hi_v4si, vec_widen_umult_lo_v4si): New.

        * config/i386/i386.c (ix86_expand_sse_unpack): New.
        * config/i386/i386-protos.h (ix86_expand_sse_unpack): New.
        * config/i386/sse.md (vec_unpacku_hi_v16qi, vec_unpacks_hi_v16qi,
        vec_unpacku_lo_v16qi, vec_unpacks_lo_v16qi, vec_unpacku_hi_v8hi,
        vec_unpacks_hi_v8hi, vec_unpacku_lo_v8hi, vec_unpacks_lo_v8hi,
        vec_unpacku_hi_v4si, vec_unpacks_hi_v4si, vec_unpacku_lo_v4si,
        vec_unpacks_lo_v4si): New.

        2006-11-08  Dorit Nuzman  <dorit@il.ibm.com>

        * tree-vect-transform.c (vectorizable_type_demotion): New function.
        (vect_transform_stmt): Add case for type_demotion_vec_info_type.
        (vect_analyze_operations): Call vectorizable_type_demotion.
        * tree-vectorizer.h (type_demotion_vec_info_type): New enum
        stmt_vec_info_type value.
        (vectorizable_type_demotion): New function declaration.
        * tree-vect-generic.c (expand_vector_operations_1): Consider correct
        mode.

        * tree.def (VEC_PACK_MOD_EXPR, VEC_PACK_SAT_EXPR): New tree-codes.
        * expr.c (expand_expr_real_1): Add case for VEC_PACK_MOD_EXPR and
        VEC_PACK_SAT_EXPR.
        * tree-iniline.c (estimate_num_insns_1): Likewise.
        * tree-pretty-print.c (dump_generic_node, op_prio): Likewise.
        * optabs.c (optab_for_tree_code): Likewise.

        * optabs.c (expand_binop): In case of vec_pack_*_optabs the mode
        compared against the predicate of the result is not 'mode' (the input
        to the function) but a mode with half the size of 'mode'.
        (init_optab): Initialize new optabs.
        * optabs.h (OTI_vec_pack_mod, OTI_vec_pack_ssat, OTI_vec_pack_usat):
        New optab indices.
        (vec_pack_mod_optab, vec_pack_ssat_optab,  vec_pack_usat_optab): New
        optabs.
        * genopinit.c (vec_pack_mod_optab, vec_pack_ssat_optab):
        (vec_pack_usat_optab): Initialize new optabs.
        * doc/md.texi (vec_pack_mod, vec_pack_ssat, vec_pack_usat): New.
        * config/rs6000/altivec.md (vec_pack_mod_v8hi, vec_pack_mod_v4si): New.

        2006-11-08  Richard Henderson  <rth@redehat.com>

        * config/i386/sse.md (vec_pack_mod_v8hi, vec_pack_mod_v4si):
        (vec_pack_mod_v2di, vec_interleave_highv16qi, vec_interleave_lowv16qi):
        (vec_interleave_highv8hi, vec_interleave_lowv8hi):
        (vec_interleave_highv4si, vec_interleave_lowv4si):
        (vec_interleave_highv2di, vec_interleave_lowv2di): New.

        2006-11-08  Dorit Nuzman  <dorit@il.ibm.com>

        * tree-vect-transform.c (vectorizable_reduction): Support multiple
        datatypes.
        (vect_transform_stmt): Removed redundant code.

        2006-11-08  Dorit Nuzman  <dorit@il.ibm.com>

        * tree-vect-transform.c (vectorizable_operation): Support multiple
        datatypes.

        2006-11-08  Dorit Nuzman  <dorit@il.ibm.com>

        * tree-vect-transform.c (vect_align_data_ref): Removed.
        (vect_create_data_ref_ptr): Added additional argument - ptr_incr.
        Updated function documentation. Return the increment stmt in ptr_incr.
        (bump_vector_ptr): New function.
        (vect_get_vec_def_for_stmt_copy): New function.
        (vect_finish_stmt_generation): Create a stmt_info to newly created
        vector stmts.
        (vect_setup_realignment): Call vect_create_data_ref_ptr with additional
        argument.
        (vectorizable_reduction, vectorizable_assignment): Not supported yet if
        VF is greater than the number of elements that can fit in one vector
        word.
        (vectorizable_operation, vectorizable_condition): Likewise.
        (vectorizable_store, vectorizable_load): Support the case that the VF
        is greater than the number of elements that can fit in one vector word.
        (vect_transform_loop): Don't fail in case of multiple data-types.
        * tree-vect-analyze.c (vect_determine_vectorization_factor): Don't fail
        in case of multiple data-types; the smallest type determines the VF.
        (vect_analyze_data_ref_dependence): Don't record datarefs as same_align
        if they are of different sizes.
        (vect_update_misalignment_for_peel): Compare misalignments in terms of
        number of elements rather than number of bytes.
        (vect_enhance_data_refs_alignment): Fix/Add dump printouts.
        (vect_can_advance_ivs_p): Fix a dump printout

2006-11-07  Eric Christopher  <echristo@apple.com>

        * libgcc2.c (__bswapdi2): Rename from bswapDI2.
        (__bswapsi2): Ditto.
        * libgcc2.h: Remove transformation of bswap routines.
        * config/i386/i386.md (bswapsi2): New.
        (bswapdi2): Ditto.

2006-11-07  Jakub Jelinek  <jakub@redhat.com>

        * c-common.c (c_common_attributes): Add gnu_inline attribyte.
        (handle_gnu_inline_attribute): New function.
        * c-decl.c (diagnose_mismatched_decls): Handle gnu_inline attribute.
        (merge_decls, start_decl, start_function): Likewise.
        * doc/extend.texi: Document gnu_inline attribute.

2006-11-07  Steve Ellcey  <sje@cup.hp.com>

        PR other/25028
        * config/ia64/t-hpux (LIB1ASMFUNCS):  Filter out _fixtfdi,
        _fixunstfdi, and  _floatditf

2006-11-06  Anatoly Sokolov <aesok@post.ru>

        * config/avr/avr-protos.h (mask_one_bit_p, const_int_pow2_p): Remove
        prototype.
        * config/avr/avr.c (mask_one_bit_p, const_int_pow2_p): Remove.
        (output_movhi, ashlhi3_out, ashlsi3_out, ashrhi3_out, ashrsi3_out,
        lshrhi3_out, lshrsi3_out): Remove unnecessary code for handling value
        which start in an odd register.

2006-11-07  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.h (ISA_HAS_PREFETCHX): Fix typo.

2006-11-07  Josh Conner  <jconner@apple.com>

        * doc/invoke.texi (fstrict-aliasing): Move implementation
        details...
        * doc/tree-ssa.texi (Alias analysis): ...here.

2006-11-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/29610
        * tree-cfgcleanup.c (cleanup_control_flow): Honor return value
        of tree_purge_dead_eh_edges as it may free dominators.

        * g++.dg/other/pr29610.C: New testcase.

2006-11-07  David Ung  <davidu@mips.com>

        * config/mips/mips.c (mips_rtx_cost_optimize_size): New table of
        costs when optimizing for size.
        (override_options): Use mips_rtx_cost_optimize_size table for cost
        calculations.

2006-11-07  Jie Zhang  <jie.zhang@analog.com>

        * gcc.c (process_command): Treat -b as normal switch if its argument
        has no dash.

2006-11-07  David Ung  <davidu@mips.com>

        * config/mips/mips.h (ISA_HAS_PREFETCHX): Add ISA_MIPS32R2 to the
        list.

2006-11-06  Eric Christopher  <echristo@apple.com>

        * config.gcc: Add x86_64-darwin host support.
        * config.host: Ditto.
        * config/i386/darwin64.h: New file.
        * config/i386/t-darwin64: Ditto.

2006-11-06  Janis Johnson  <janis187@us.ibm.com>

        * gcc/doc/sourcebuild.texi (Test Directives): Add output-exists
        and output-exists-not.

2006-11-06  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        PR tree-opt/29439
        * tree-vrp.c (vrp_int_const_binop): Use the correct tree when
        checking for overflow.

2006-11-06  Jan van Dijk  <jan@etpmod.phys.tue.nl>

        * configure.ac: Fixed typo in case statement: :: changed to ;;

2006-11-06  Bob Wilson  <bob.wilson@acm.org>

        * longlong.h (__xtensa__): Add definitions for umul_ppmm, __umulsidi3,
        count_leading_zeros, and count_trailing_zeros.
        * config/xtensa/xtensa.c (TARGET_INIT_BUILTINS): Define.
        (TARGET_FOLD_BUILTIN): Define.
        (TARGET_EXPAND_BUILTIN): Define.
        (xtensa_init_builtins): New.
        (xtensa_fold_builtin): New.
        (xtensa_expand_builtin): New.
        (xtensa_rtx_costs): Add CTZ and CLZ.  Adjust costs for MULT.
        * config/xtensa/xtensa.h (TARGET_MUL32_HIGH): Define.
        (CLZ_DEFINED_VALUE_AT_ZERO): Define.
        (CTZ_DEFINED_VALUE_AT_ZERO): Define.
        * config/xtensa/xtensa.md (UNSPEC_NSAU): Remove.
        (any_extend): New code macro.
        (u, su): New code attributes.
        (<u>mulsidi3, <u>mulsi3_highpart, clzsi2, ctzsi2): New.
        (nsau): Remove; replaced by clzsi2.
        (ffssi2): Use clzsi2.
        * config/xtensa/t-xtensa (LIB1ASMFUNCS): Add _umulsidi3,
        _clzsi2, _ctzsi2, and _ffssi2.  Rename _nsau to _clz.
        * config/xtensa/lib1funcs.asm (__mulsi3): Support Mul32 option.
        (__umulsidi3, __clzsi2, __ctzsi2, __ffssi2): New.
        (__nsau_data): Guard with ifdef L_clz instead of L_nsau.

2006-11-06  Vladimir Prus  <vladimir@codesourcery.com>

        * config/arm/t-strongarm-pe: (TARGET_LIBGCC2_CFLAGS): Do no
        set inhibit_libc.
        * config/arm/t-strongarm-elf: Likewise.
        * config/arm/t-pe: Likewise.
        * config/arm/t-arm-elf: Likewise.
        * config/arm/t-xscale-elf: Likewise.
        * config/arm/t-arm-coff: Likewise.
        * config/arm/t-xscale-coff: Likewise.
        * config/arm/t-wince-pe: Likewise.

2006-11-05  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/lib1funcs-4-300.asm: Guard entire file with
        #if !__SHMEDIA__ .

2006-11-05  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/29695
        * fold-const.c (fold_ternary): Fix A < 0 ? <sign bit of A> : 0
        simplification.

2006-11-04  Uros Bizjak  <ubizjak@gmail.com>

        PR target/26915
        * config/i386/i386.c (standard_80387_constant_p): Treat -0.0 and -1.0
        as a valid 80387 constant.
        (standard_80387_constant_opcode): Return "#" for -0.0 and -1.0.
        * config/i386/i386.md (unnamed splitter): Split the load of
        constant -0.0 or -1.0  into the load of 0.0 or 1.0, followed
        by negation.

2006-11-04  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (thumb_legitimate_addres_p): Allow any constant offset
        from the soft-frame, argument and virtual registers.

2006-11-04  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*movxf_nointeger, *movxf_integer): Enable
        patterns for standard 80387 constants.

2006-11-03  Paolo Bonzini  <bonzini@gnu.org>
            Steven Bosscher  <steven@gcc.gnu.org>

        * fwprop.c: New file.
        * Makefile.in: Add fwprop.o.
        * tree-pass.h (pass_rtl_fwprop, pass_rtl_fwprop_with_addr): New.
        * passes.c (init_optimization_passes): Schedule forward propagation.
        * rtlanal.c (loc_mentioned_in_p): Support NULL value of the second
        parameter.
        * timevar.def (TV_FWPROP): New.
        * common.opt (-fforward-propagate): New.
        * opts.c (decode_options): Enable forward propagation at -O2.
        * gcse.c (one_cprop_pass): Do not run local cprop unless touching jumps.
        * cse.c (fold_rtx_subreg, fold_rtx_mem, fold_rtx_mem_1, find_best_addr,
        canon_for_address, table_size): Remove.
        (new_basic_block, insert, remove_from_table): Remove references to
        table_size.
        (fold_rtx): Process SUBREGs and MEMs with equiv_constant, make
        simplification loop more straightforward by not calling fold_rtx
        recursively.
        (equiv_constant): Move here a small part of fold_rtx_subreg,
        do not call fold_rtx.  Call avoid_constant_pool_reference
        to process MEMs.
        * recog.h (canonicalize_change_group): New.

        * doc/invoke.texi (Optimization Options): Document fwprop.
        * doc/passes.texi (RTL passes): Document fwprop.

2006-11-03  Geoffrey Keating  <geoffk@apple.com>

        * c-decl.c (WANT_C99_INLINE_SEMANTICS): New, set to 1.
        (merge_decls): Implement WANT_C99_INLINE_SEMANTICS.
        (grokdeclarator): Likewise.

2006-11-03  Steven Bosscher  <steven@gcc.gnu.org>

        * tree-dump.c (dump_enable_all): Rename local variable
        ir_type to avoid name conflicts.
        * cfgloopmanip.c (lv_adjust_loop_entry_edge): Check for IR_GIMPLE
        instead of using ir_type().
        * profile.c (tree_register_profile_hooks): Likewise.
        * value-prof.c (tree_register_value_prof_hooks): Likewise.
        * basic-block.h (struct edge_def): Likewise.
        * config/arm/arm.c (legitimize_pic_address): Likewise.
        * coretypes.h (ir_type): New enum of all intermediate languages
        used in GCC.
        * cfghooks.c (ir_type): Rename to...
        (current_ir_type): ...this.  Distinguish between cfgrtl and
        cfglayout mode when the current IR is RTL.  Return enum ir_type.
        * cfghooks.h (ir_type): Replace with current_ir_type prototype.

2006-11-03  Paul Brook  <paul@codesourcery.com>

        * config/arm/arm.c (arm_file_start): New function.
        (TARGET_ASM_FILE_START): Define.
        (arm_default_cpu): New variable.
        (arm_override_options): Set arm_default_cpu.

2006-11-03  David Ung  <davidu@mips.com>

        * config/mips/mips.h (processor_type): Removed PROCESSOR_24K, add
        PROCESSOR_24KC and PROCESSOR_24KF.
        * config/mips/mips.c (mips_cpu_info_table): Add processor names
        and aliases for 4kec/4kem/4kep/24kec/24kef/24kex/34kc/34kf/34kx.
        (mips_rtx_cost_data): Add costs for the 24kc.
        * config/mips/mips.md ("cpu"): Remove 24k, add 24kc and 24kf.
        * config/mips/24k.md: Remove references to 24k and replace with
        uses of 24kc/24kf in the appropriate reservations.
        * doc/invoke.texi (MIPS Options): Updated.

2006-11-03  J"orn Rennecke  <joern.rennecke@st.com>

        * config/sh/crt1.asm: Fix #ifdef indent.

2006-11-03  J"orn Rennecke  <joern.rennecke@st.com>
        Merged from STMicroelectronics sources:
        2006-10-06  Andrew Stubbs  <andrew.stubbs@st.com>
          * config/sh/crt1.asm (vbr_600): Add missing #if.
        2006-08-03  J"orn Rennecke  <joern.rennecke@st.com>
          * sh.opt (mfused-madd): New option.
          * sh.md (mac_media, macsf3): Make conditional on TARGET_FMAC.
        2006-07-04  Andrew Stubbs  <andrew.stubbs@st.com>
          * config/sh/crt1.asm (vbr_start): Move to new section .test.vbr.
          Remove pointless handler at VBR+0.
          (vbr_200, vbr_300, vbr_500): Remove pointless handler.
          (vbr_600): Save and restore mach and macl, fpul and fpscr and fr0 to
          fr7. Make sure the timer handler is called with the correct FPU
          precision setting, according to the ABI.
        2006-06-14  J"orn Rennecke <joern.rennecke@st.com>
          * config/sh/sh.opt (m2a-single, m2a-single-only): Fix Condition.
          * config/sh/sh.h (SUPPORT_SH2A_NOFPU): Fix condition.
          (SUPPORT_SH2A_SINGLE_ONLY, SUPPORT_SH2A_SINGLE_ONLY): Likewise.
        2006-06-09  J"orn Rennecke <joern.rennecke@st.com>
          * sh.md (cmpgeusi_t): Change into define_insn_and_split.  Accept
          zero as second operand.
        2006-04-28  J"orn Rennecke <joern.rennecke@st.com>
          * config/sh/divtab-sh4-300.c, config/sh/lib1funcs-4-300.asm:
          Fixed some bugs related to negative values, in particular -0
          and overflow at -0x80000000.
          * config/sh/divcost-analysis: Added sh4-300 figures.
        2006-04-27  J"orn Rennecke <joern.rennecke@st.com>
          * config/sh/t-sh (MULTILIB_MATCHES): Add -m4-300* / -m4-340 options.
        2006-04-26  J"orn Rennecke <joern.rennecke@st.com>
          * config/sh/t-sh (OPT_EXTRA_PARTS): Add libgcc-4-300.a.
          ($(T)div_table-4-300.o, $(T)libgcc-4-300.a): New rules.
          * config/sh/divtab-sh4-300.c, config/sh/lib1funcs-4-300.asm:
        New files.
          * config/sh/embed-elf.h (LIBGCC_SPEC): Use -lgcc-4-300 for -m4-300* /
          -m4-340.
        2006-04-24  J"orn Rennecke <joern.rennecke@st.com>
          SH4-300 scheduling description & fixes to SH4-[12]00 description:
          * sh.md: New instruction types: fstore, movi8, fpscr_toggle, gp_mac,
          mac_mem, mem_mac, dfp_mul, fp_cmp.
          (insn_class, dfp_comp, any_fp_comp): Update.
          (push_fpul, movsf_ie, fpu_switch, toggle_sz, toggle_pr): Update type.
          (cmpgtsf_t, "cmpeqsf_t, cmpgtsf_t_i4, cmpeqsf_t_i4): Likewise.
          (muldf3_i): Likewise.
          (movsi_i): Split rI08 alternative into two separate alternatives.
          Update type.
          (movsi_ie, movsi_i_lowpart): Likewise.
          (movqi_i): Split ri alternative into two separate alternatives.
          Update type.
          * sh1.md (sh1_load_store, sh1_fp): Update.
          * sh4.md (sh4_store, sh4_mac_gp, fp_arith, fp_double_arith): Update.
          (mac_mem, sh4_fpscr_toggle): New insn_reservations.
          * sh4a.md (sh4a_mov, sh4a_load, sh4a_store, sh4a_fp_arith): Update.
          (sh4a_fp_double_arith): Likewise.
          * sh4-300.md: New file.
          * sh.c (sh_handle_option): Handle m4-300* options.
          (sh_adjust_cost): Fix latency of auto-increments.
          Handle SH4-300 differently than other SH4s.  Check for new insn types.
          * sh.h (OVERRIDE_OPTIONS): Initilize sh_branch_cost if it has not
          been set by an option.
          * sh.opt (m4-300, m4-100-nofpu, m4-200-nofpu): New options.
          (m4-300-nofpu, -m4-340, m4-300-single, m4-300-single-only): Likewise.
          (mbranch-cost=): Likewise.
          * superh.h (STARTFILE_SPEC): Take -m4-340 into account.

          * sh.md (mulsf3): Remove special expansion code.
          (mulsf3_ie): Now a define_insn_and_split.
          (macsf3): Allow for TARGET_SH4.

          * sh.md (cbranchsi4, cbranchdi4, cbranchdi4_i): New patterns.
          * sh.c (prepare_cbranch_operands, expand_cbranchsi4): New functions.
          (expand_cbranchdi4): Likewise.
          (sh_rtx_costs): Give lower cost for certain CONST_INT values and for
          CONST_DOUBLE if the outer code is COMPARE.
          * sh.h (OPTIMIZATION_OPTIONS): If not optimizing for size, set
          TARGET_CBRANCHDI4 and TARGET_EXPAND_CBRANCHDI4.
          (OVERRIDE_OPTIONS): For TARGET_SHMEDIA, clear TARGET_CBRANCHDI4.
          (LEGITIMATE_CONSTANT_P): Also allow DImode and VOIDmode CONST_DOUBLEs.
          Remove redundant fp_{zero,one}_operand checks.
          * sh.opt (mcbranchdi, mexpand-cbranchdi, mcmpeqdi): New options.
          * sh-protos.h (prepare_cbranch_operands, expand_cbranchsi4): Declare.
          (expand_cbranchdi4): Likewise.
        2006-04-20  J"orn Rennecke <joern.rennecke@st.com>
          * sh.h (LOCAL_ALIGNMENT): Use DATA_ALIGNMENT.

2006-11-02  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        * doc/md.texi (RS6000 constraints): Document H, Z, a, t, and W
        constraints.

2006-11-02  Brooks Moses  <brooks.moses@codesourcery.com>

        * doc/invoke.texi: Fix mfp-trap-mode typo.

2006-11-02  Carlos O'Donell  <carlos@codesourcery.com>

        * config/arm/linux-elf.h (NEED_INDICATE_EXEC_STACK): Define as 1.
        * arm.c (arm_file_end): If NEED_INDICATE_EXEC_STACK call
        file_end_indicate_exec_stack.
        * arm.h [!NEED_INDICATE_EXEC_STACK] (NEED_INIDCATE_EXEC_STACK):
        Define as 0.
        * lib1funcs.asm [__ELF__ && __linux__]: Emit .note.GNU-stack section
        for a non-executable stack.
        * crti.asm: Likewise.
        * crtn.asm: Likewise.
        * libunwind.S: Likewise.

2006-11-02  Ben Elliston  <bje@au.ibm.com>

        * tree-ssa.c (warn_uninit): Use expand_location variables for
        locus and declaration locus.

2006-11-02  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/27405
        * config/sh/sh.md (cmp{eq,gt,gtu}{si,di}_media): Remove.
        (cmpsi{eq,gt,gtu}{si,di}_media): Rename to
        cmp{eq,gt,gtu}{si,di}_media.
        (*cmpne0si_media): Remove.
        (*movsicc_umin): Adjust gen_cmp*_media call.
        (unordered): Change the mode of unordered and operands[1] to
        SImode.
        (seq): Adjust gen_cmp*_media calls.  Make the mode of
        a temporary result of compare SImode if needed.  If the mode
        of operands[0] is DImode, extend the temporary result to DImode.
        (slt, sle, sgt, sge, sgtu, sltu, sleu, sgue, sne): Likewise.
        (sunorderd): Change the mode of match_operand and unorderd to
        SImode.
        (cmpeq{sf,df}_media): Remove.
        (cmpsieq{sf,df}_media): Rename to cmpeq{sf,df}_media.
        (cmp{gt,ge,un}{sf,df}_media): Change the mode of match_operand
        and compare operation to SImode.

2006-11-02  Eric Botcazou  <ebotcazou@libertysurf.fr>

        * doc/install.texi (sparc-sun-solaris2*): Update GMP/MPFR build
        instructions.
        (sparc64-sun-solaris2*): Likewise.

2006-11-02  Paul Brook  <paul@codesourcery.com>

        * config/arm/arm.c (arm_elf_asm_constructor): Remove ATTRIBUTE_UNUSED
        from priority argument.  Use different section for non-default
        priority.
        * config/arm/elf.h: Remove definition of SUPPORTS_INIT_PRIORITY.

2006-11-02  Eric Botcazou  <ebotcazou@adacore.com>

        PR other/29639
        * except.c (switch_to_exception_section): Do not cache the section
        if named sections are supported and HAVE_LD_EH_GC_SECTIONS is defined
        and flag_function_sections is set.

2006-11-01  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (do_mpfr_sincos): New.
        (fold_builtin_1): Use it to fold builtin sincos.

2006-11-01  Roger Sayle  <roger@eyesopen.com>

        * config/darwin.h (CPP_SPEC): Handle -pthread, transforming
        it into -D_REENTRANT.

2006-11-01  Roger Sayle  <roger@eyesopen.com>

        * configure.ac (HAVE_AS_IX86_DIFF_SECT_DELTA): New test to determine
        whether the assembler supports taking the difference of symbols in
        different sections.  On x86/Solaris, GAS does but Solaris as doesn't.
        * configure: Regenerate.
        * config.in: Regenerate.
        * config/i386/sol2-10.h (JUMP_TABLES_IN_TEXT_SECTION): Define if
        the assembler doesn't support taking the difference of symbols in
        different sections, i.e. we're using the native solaris assembler.

2006-11-01  Pete Steinmetz  <steinmtz@us.ibm.com>
            Peter Bergner  <bergner@vnet.ibm.com>

        * doc/invoke.texi: Add cpu_type power6x
        (RS/6000 and PowerPC Options): Add -mmfpgpr.
        * config.gcc: Add cpu_type power6x.
        * configure.ac: Add test for mf{t,f}gpr instructions.
        (HAVE_AS_MFPGPR): New.
        * config.in: Regenerate.
        * configure: Regenerate.
        * config/rs6000/aix52.h (ASM_CPU_SPEC): Add power6x.
        * config/rs6000/rs6000.md (define_attr "type"): Add insert_dword,
        shift,trap,var_shift_rotate,cntlz,exts, var_delayed_compare, mffgpr
        and mftgpr attributes.
        (define_attr "cpu"): Add power6.
        Change instruction sequences to use new attributes.
        (floatsidf2,fix_truncdfsi2): use TARGET_MFPGPR.
        (fix_truncdfsi2_mfpgpr): New.
        (floatsidf_ppc64_mfpgpr): New.
        (floatsidf_ppc64): Added !TARGET_MFPGPR condition.
        (movdf_hardfloat64_mfpgpr,movdi_mfpgpr): New.
        (movdf_hardfloat64): Added !TARGET_MFPGPR condition.
        (movdi_internal64): Added !TARGET_MFPGPR and related conditions.
        (fix_truncdfsi2): Use gpc_reg_operand constraint.
        * config/rs6000/{6xx.md,power4.md,8540.md,603.md,mpc.md,
        7xx.md,rios2.md,7450.md,440.md,rios1.md,rs64.md,power5.md,40x.md}:
        Add descriptions for insert_dword, shift,trap,var_shift_rotate,
        cntlz,exts and var_delayed_compare.
        * config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
        _ARCH_PWR6X, if features enabled.
        * config/rs6000/rs6000.opt (mmfpgpr): New.
        * config/rs6000/rs6000.c (rs6000_align_branch_targets): New variable.
        (cached_can_issue_more): New variable.
        (processor_costs): Add power6_cost.
        (rs6000_sched_init): New function.
        (is_dispatch_slot_restricted): Deleted.
        (set_to_load_agen): New function.
        (is_load_insn,is_store_insn): New functions.
        (adjacent_mem_locations): New function.
        (insn_must_be_first_in_group): New function.
        (insn_must_be_last_in_group): New function.
        (rs6000_sched_reorder): New function.
        (rs6000_sched_reorder2): New function.
        (TARGET_SCHED_INIT,TARGET_SCHED_REORDER,
        TARGET_SCHED_REORDER2): Define.
        (processor_target_table): Use PROCESSOR_POWER6 for power6.
        Add power6x. Add MASK_MFPGPR for power6x.
        (POWERPC_MASKS): Add MASK_MFPGPR.
        (rs6000_override_options): Set rs6000_always_hint to false
        for power6.  Set rs6000_align_branch_targets. Replace
        rs6000_sched_groups check with rs6000_align_branch_targets.
        Use PROCESSOR_POWER6.
        (last_scheduled_insn): New variable.
        (load_store_pendulum): New variable.
        (rs6000_variable_issue): Set last_scheduled_insn and
        cached_can_issue_more.
        (rs6000_adjust_cost): Add power6 cost adjustments.
        (rs6000_adjust_priority): Replace is_dispatch_slot_restricted
        with insn_must_be_first_in_group. Add power6 priority adjustments.
        (rs6000_issue_rate): Add CPU_POWER6.
        (insn_terminates_group_p): Use insn_must_be_{first,last}_in_group.
        * config/rs6000/rs6000.h (processor_type): Add PROCESSOR_POWER6.
        (TARGET_MFPGPR): New.
        (SECONDARY_MEMORY_NEEDED): Use TARGET_MFPGPR.
        (ASM_CPU_SPEC): Add power6x.
        (SECONDARY_MEMORY_NEEDED): Added mode!=DFmode and mode!=DImode
        conditions.
        * config/rs6000/power6.md: New file.

2006-11-01  Adam Nemet  <anemet@caviumnetworks.com>

        * tree-pretty-print.c (dump_generic_node) <INTEGER_CST>: Use
        HOST_WIDE_INT_PRINT to print high and low parts.  Use
        HOST_BITS_PER_WIDE_INT for the width of HOST_WIDE_INT.  When
        printing a hexadecimal number prefix it with 0x.

2006-11-01  Chris Johns <chris@contemporary.net.au>

        PR bootstrap/28400
        * Makefile.in (install-driver): Use exeext when installing
        $target-gcc-$version.

2006-11-01      Douglas Gregor <doug.gregor@gmail.com>

        * c-common.c (flag_cpp0x): New.
        * c-common.h (flag_cpp0x): New.
        * c-cppbuiltin.c (c_cpp_builtins): If C++0x extensions are
        supported, define __GXX_EXPERIMENTAL_CPP0X__.
        * c-opts.c (set_std_cxx0x): New.
        (c_common_handle_option): Handle -std=c++0x, -std=gnu++0x.
        * c.opt (std=c++0x): Document.
        (std=gnu++0x): Ditto.
        * doc/cpp.texi: Document __GXX_EXPERIMENTAL_CPP0X__.
        * doc/invoke.texi: Document -std=c++0x, -std=gnu++0x.

2006-11-01  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386.c (ix86_expand_rint): Fix issues with
        signed zeros.
        (ix86_expand_floorceildf_32): Likewise.
        (ix86_expand_floorceil): Likewise.
        (ix86_expand_trunc): Likewise.

2006-10-31  Andrew Pinski  <pinskia@gmail.com>

        * doc/invoke.texi (-fkeep-inline-functions): Change "GNU C"
        to "GNU C89".

2006-11-01  Danny Smith  <dannysmith@users.sourceforge.net>

        * target.h (targetm.cxx.use_atexit_for_cxa_atexit): New target
        hook.
        * target-def.h: (TARGET_CXX_USE_ATEXIT_FOR_CXA_ATEXIT): Define
        default.
        * config/i386/mingw32.h (TARGET_CXX_USE_ATEXIT_FOR_CXA_ATEXIT):
        Override default.
        * doc/tm.texi (TARGET_CXX_USE_ATEXIT_FOR_CXA_ATEXIT): Document.
        * configure.ac (use_cxa_atexit): As a special case, don't test
        for libc definition of __cxa_atexit on mingw32
        * configure: Regenerate.
        * config.gcc (i[34567]86-pc-mingw32): Default to
        enable__cxa_atexit=yes.

2006-11-01  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.def (gamma, lgamma): Use ATTR_MATHFN_FPROUNDING_STORE.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        PR 23067
        * c-decl.c (start_struct): Don't create self-containing
        structures.
        * config/rs6000/rs6000.c (darwin_rs6000_special_round_type_align):
        New.
        * config/rs6000/rs6000-protos.h
        (darwin_rs6000_special_round_type_align): New.
        * config/rs6000/darwin.h (ADJUST_FIELD_ALIGN): Rewrite.
        (ROUND_TYPE_ALIGN): Use darwin_rs6000_special_round_type_align.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        * toplev.c (compile_file): Call final_write_globals
        even if there have been errors.

2006-10-31  Eric Christopher  <echristo@apple.com>
            Falk Hueffner  <falk@debian.org>

        * doc/extend.texi (__builtin_bswap32): Document.
        (__builtin_bswap64): Ditto.
        * doc/libgcc.texi (bswapsi2): Document.
        (bswapdi2): Ditto.
        * doc/rtl.texi (bswap): Document.
        * optabs.c (expand_unop): Don't widen a bswap.
        (init_optabs): Init bswap. Set libfuncs explicitly
        for bswapsi2 and bswapdi2.
        * optabs.h (OTI_bswap): New.
        (bswap_optab): Ditto.
        * genopinit.c (optabs): Handle bswap_optab.
        * tree.h (tree_index): Add TI_UINT32_TYPE and
        TI_UINT64_TYPE.
        (uint32_type_node): New.
        (uint64_type_node): Ditto.
        * tree.c (build_common_tree_nodes_2): Initialize
        uint32_type_node and uint64_type_node.
        * builtins.c (expand_builtin_bswap): New.
        (expand_builtin): Call.
        (fold_builtin_bswap): New.
        (fold_builtin_1): Call.
        * fold-const.c (tree_expr_nonnegative_p): Return true
        for bswap.
        * builtin-types.def (BT_UINT32): New.
        (BT_UINT64): Ditto.
        (BT_FN_UINT32_UINT32): Ditto.
        (BT_FN_UINT64_UINT64): Ditto.
        * builtins.def (BUILT_IN_BSWAP32): New.
        (BUILT_IN_BSWAP64): Ditto.
        * rtl.def (BSWAP): New.
        * genattrtab.c (check_attr_value): New.
        * libgcc2.c (__bswapSI2): New.
        (__bswapDI2): Ditto.
        * libgcc2.h (__bswapSI2): Declare.
        (__bswapDI2): Ditto.
        * mklibgcc.in (lib2funcs): Add _bswapsi2 and _bswapdi2.
        * simplify-rtx.c (simplify_const_unary_operation): Return
        0 for BSWAP.
        * libgcc-std.ver (__bwapsi2): Add.
        (__bswapdi2): Ditto.
        * reload1.c (eliminate_regs_1): Add bswap.
        (elimination_effects): Ditto.
        * config/i386/i386.h (x86_bswap): New.
        (TARGET_BSWAP): Use.
        * config/i386/i386.c (x86_bswap): Set.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        * coverage.c (coverage_checksum_string): Update comment.
        * dwarf2out.c (switch_to_eh_frame_section): Update for removal
        of get_file_function_name.
        * cgraphunit.c (cgraph_build_static_cdtor): Update for rename
        of get_file_function_name_long.
        * tree.c (get_file_function_name): Rename from
        get_file_function_name_long; improve comment; handle 'I' and 'D'
        specially when the target has ctor/dtor support; remove special
        handling for 'F'.
        (get_file_function_name): Remove.
        * tree.h (get_file_function_name): Rename from
        get_file_function_name_long.
        (get_file_function_name): Remove prototype.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        * config/i386/darwin.h (PREFERRED_DEBUGGING_TYPE): Remove.
        * config/darwin.h (PREFERRED_DEBUGGING_TYPE): Set to DWARF2_DEBUG.

        * config/darwin.h (LINK_COMMAND_SPEC): Don't do weird things with -@.
        Call dsymutil when compiling and linking one or more source files
        in one step.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        PR 15834
        * config/darwin.h (NO_IMPLICIT_EXTERN_C): Define.

2006-10-31  Geoffrey Keating  <geoffk@apple.com>

        * c-decl.c (grokdeclarator): Don't set DECL_EXTERNAL on
        inline static functions in c99 mode.

        PR 16622
        * doc/extend.texi (Inline): Update.
        * c-tree.h (struct language_function): Remove field 'extern_inline'.
        * c-decl.c (current_extern_inline): Delete.
        (pop_scope): Adjust test for an undefined nested function.
        Add warning about undeclared inline function.
        (diagnose_mismatched_decls): Update comments.  Disallow overriding
        of inline functions in a translation unit in C99.  Allow inline
        declarations in C99 at any time.
        (merge_decls): Boolize variables.  Handle C99 'extern inline'
        semantics.
        (grokdeclarator): Set DECL_EXTERNAL here for functions.  Handle
        C99 inline semantics.
        (start_function): Don't clear current_extern_inline.  Don't set
        DECL_EXTERNAL.
        (c_push_function_context): Don't push current_extern_inline.
        (c_pop_function_context): Don't restore current_extern_inline.

        PR 11377
        * c-typeck.c (build_external_ref): Warn about static variables
        used in extern inline functions.
        * c-decl.c (start_decl): Warn about static variables declared
        in extern inline functions.

2006-10-31  Roger Sayle  <roger@eyesopen.com>

        PR middle-end/23470
        * tree.h (tree_expr_nonnegative_p): Return "bool" instead of "int".
        * fold-const.c (tree_expr_nonnegative_p): Likewise.  Consider
        pow(x,y) and powi(x,y) to be nonnegative if either x is nonnegative
        or y is an even integer.

2006-10-31  Eric Botcazou  <ebotcazou@libertysurf.fr>

        PR target/24071
        * gthr-posix.h (__gthread_active_p): New implementation on Solaris.
        * gthr-posix95.h (__gthread_active_p): Likewise.

2006-10-31  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386.md (asindf2, asinsf2, asinxf2, acosdf2,
        acossf2, acosxf2, log1psf2, log1pdf2, log1pxf2, ilogbsi2,
        expsf2, expdf2, expxf2, exp10sf2, exp10df2, exp10xf2,
        exp2sf2, exp2df2, exp2xf2, expm1df2, expm1sf2, expm1xf2,
        ldexpdf3, ldexpsf3, ldexpxf3, rintxf2, rintdf2, rintsf2,
        lround<mode>di2, lround<mode>si2, floorxf2, floordf2, floorsf2,
        lfloor<mode>di2, lfloor<mode>si2, ceilxf2, ceildf2, ceilsf2,
        btruncxf2, btruncdf2, btruncsf2): Conditionalize expansion on
        !optimize_size.

2006-10-31  Steven Bosscher  <steven@gcc.gnu.org>

        * opts.c (decode_options): Disable CSE skip blocks.

2006-10-30  Dirk Mueller  <dmueller@suse.de>

        * c-common.h (strict_aliasing_warning): Fix whitespace.
        * c-decl (start_function): Move code for main decl warning ..
        * c-common.c (check_main_parameter_types): .. here.
        * c-common.h (check_main_parameter_types): Declare.

2006-10-30  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (fold_builtin_1): Evaluate tgamma using MPFR.

2006-10-30  Pete Steinmetz  <steinmtz@us.ibm.com>

        * recog.c (store_data_bypass_p): Add support to allow IN_INSN to
        be a PARALLEL containing sets.  Return false when out_pat is not
        a PARALLEL insn.

2006-10-30  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.md (mul<mode>3): Split into...
        (mulsi3, muldi3): ...these separate patterns.

2006-10-30  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/linux64.h (DRIVER_SELF_SPECS): Use a single spec,
        but with each set of options separated by spaces.

2006-10-30  J"orn Rennecke  <joern.rennecke@st.com>

        * unwind-dw2.c (uw_init_context_1): Fix test that checks if
        dwarf_reg_size_table has been initialized.

2006-10-30  Roger Sayle  <roger@eyesopen.com>

        * builtins.c (expand_builtin_mathfn_3): Correct coding style.
        * ddg.c (print_ddg_edge): Likewise.
        * dwarf2out.c (prune_unused_types_walk): Likewise.
        * ifcvt.c (noce_try_cmove_arith): Likewise.
        * langhooks.c (add_builtin_function): Likewise.
        * reg-stack.c (subst_stack_regs_pat): Likewise.
        * tree.c (expanded_location): Likewise.
        * tree-dump.c (dequeue_and_dump): Likewise.

2006-10-30  David Daney  <ddaney@avtrex.com>

        * config/mips/linux.h (NO_SHARED_SPECS): Correct syntax error.

2006-10-30  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/29637
        * tree.c (make_vector_type): Don't recurse if TYPE_MAIN_VARIANT
        of the innertype is the innertype itself.

2006-10-30  Danny Smith  <dannysmith@users.sourceforge.net>

        * dwarf2out.c (file_name_acquire): Correct typo.

2006-10-29  Daniel Berlin  <dberlin@dberlin.org>

        * tree.h (tree_value_handle): Remove struct value_set declaration.
        Change value_set to bitmap_set.
        * tree-pretty-print.c (dump_generic_node): Use has_stmt_ann.
        * tree-vn.c (get_value_handle): Made inline and moved to
        tree-flow-inline.h.
        * tree-flow-inline.h: (has_stmt_ann): New function.
        * tree-ssa-pre.c (expressions): New variable.
        (next_expression_id): Ditto.
        (alloc_expression_id): New function.
        (struct value_set): Remove.
        (get_expression_id): New function.
        (get_or_alloc_expression_id): Ditto.
        (expression_for_id): Ditto.
        (clear_expression_ids): Ditto.
        (FOR_EACH_EXPR_ID_IN_SET): New macro.
        (bb_value_sets): Renamed to bb_bitmap_sets.
        All value sets replaced with bitmap_sets.
        Add visited member.
        (BB_VISITED): New macro.
        (postorder): New variable.
        (add_to_value): Removed.
        (value_exists_in_set_bitmap): Ditto.
        (value_insert_into_set_bitmap): Ditto.
        (set_new): Ditto.
        (set_copy): Ditto.
        (set_remove): Ditto.
        (set_contains_value): Ditto.
        (insert_into_set): Ditto.
        (set_equal): Ditto.
        (find_leader): Ditto.
        (bitmap_set_subtract_from_value_set): Ditto.
        (value_insert_into_set): Ditto.
        (print_value_set): Ditto.
        (debug_value_set): Ditto.
        (constant_expr_p): New function.
        (bitmap_remove_from_set): Ditto.
        (bitmap_insert_into_set): Ditto.
        (bitmap_set_free): Ditto.
        (vh_compare): Ditto.
        (sorted_array_from_bitmap_set): Ditto.
        (bitmap_set_subtract): Ditto.
        (bitmap_set_equal): Ditto.
        (debug_bitmap_set): Ditto.
        (find_leader_in_sets): Ditto.
        (bitmap_set_replace_value): Modify for bitmapped sets.
        (phi_translate): Ditto.
        (phi_translate_set): Ditto.
        (bitmap_find_leader): Ditto.
        (valid_in_sets): Ditto.
        (union_contains_value): Ditto.
        (clean): Ditto.
        (compute_antic_aux): Ditto.  Mark changed blocks.
        (compute_antic): Ditto. Iterate in postorder and only over
        changing blocks.
        (compute_rvuse_and_antic_safe): Reuse postorder.
        (create_component_ref_by_pieces): Modify for bitmapped sets.
        (find_or_generate_expression): Ditto.
        (create_expression_by_pieces): Ditto.
        (insert_into_preds_of_block): Ditto.
        (changed_blocks): New variable.
        (do_regular_insertion): Broken out from insert_aux.
        (insert_aux): Modified for bitmapped sets.
        (find_existing_value_expr): New function.
        (create_value_expr_from): Use it.
        (insert_extra_phis): Removed.
        (print_bitmap_set): Renamed from bitmap_print_value_set.
        (compute_avail): Handle RETURN_EXPR.
        (init_pre): Modify for bitmapped sets.
        * tree-flow.h (has_stmt_ann): New function.

2006-10-29  Roger Sayle  <roger@eyesopen.com>

        * builtins.c (fold_builtin_floor): Check for the availability of
        the C99 trunc function before transforming floor into trunc.

2006-10-29  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (fold_builtin_hypot): Rearrange recursive
        transformation before others, and also do ABS_EXPR.  When
        necessary, check flag_unsafe_math_optimizations.  When necessary,
        add fabs.

2006-10-29  Roger Sayle  <roger@eyesopen.com>

        * fold-const.c (fold_comparison): Fold ~X op ~Y as Y op X.
        Fold ~X op C as X op' ~C, where op' is the swapped comparison.
        (fold_binary): ~X eq/ne C is now handled in fold_comparison.
        Fold -X eq/ne -Y as X eq/ne Y.

2006-10-29  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.md (mul<mode>3): Check ISA_HAS_MUL3 rather than
        GENERATE_MULT3_<MODE>.  Restrict the test to SImode.  Use ISA_HAS_MUL3
        rather than GENERATE_MULT3_SI in the various define_peephole2s.
        (mulsi3_mult3): Depend on ISA_HAS_MUL3 rather than GENERATE_MULT3_SI.
        Use an inclusive test for "mult" rather than "mul".
        (rotr<mode>3): Depend on ISA_HAS_ROR.
        * config/mips/mips.h (GENERATE_MULT3_SI): Delete in favor of
        ISA_HAS_MUL3.
        (GENERATE_MULT3_DI): Delete.
        (ISA_HAS_64BIT_REGS): Use consistent formatting.
        (ISA_HAS_MUL3): New macro.
        (ISA_HAS_CONDMOVE, ISA_HAS_8CC): Use consistent formatting.
        (ISA_HAS_FP4, ISA_HAS_MADD_MSUB, ISA_HAS_NMADD_NMSUB): Likewise.
        (ISA_HAS_CLZ_CLO): Likewise.
        (ISA_HAS_DCLZ_DCLO): Delete.
        (ISA_HAS_MULHI, ISA_HAS_MULS, ISA_HAS_MSAC): Require !TARGET_MIPS16.
        (ISA_HAS_MACC): Require !TARGET_MIPS16 for all ISAs, not just
        the VR4120 and VR4130.
        (ISA_HAS_MACCHI): Use consistent formatting.
        (ISA_HAS_ROTR_SI, ISA_HAS_ROTR_DI): Delete in favor of...
        (ISA_HAS_ROR): ...this new macro.
        (ISA_HAS_PREFETCH, ISA_HAS_PREFETCHX): Use consistent formatting.
        (ISA_HAS_SEB_SEH, ISA_HAS_EXT_INS): Likewise.
        (ISA_HAS_LOAD_DELAY): Use ISA_MIPS1.

2006-10-29  Roger Sayle  <roger@eyesopen.com>

        PR tree-optimization/15458
        * fold-const.c (fold_binary): Optimize ~X ^ C as X ^ ~C, where C
        is a constant.

2006-10-29  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386-protos.h (ix86_expand_trunc): Declare.
        (ix86_expand_truncdf_32): Likewise.
        * config/i386/i386.c (ix86_expand_trunc): New function expanding
        trunc inline for SSE math and -fno-trapping-math and if not
        optimizing for size.
        (ix86_expand_truncdf_32): Same for DFmode on 32bit archs.
        * config/i386/i386.md (btruncsf2, btruncdf2): Adjust expanders
        for expanding btrunc inline for SSE math.

2006-10-29  Joseph Myers  <joseph@codesourcery.com>

        * config.gcc (i[34567]86-*-linux*): Handle --enable-targets=all.
        Handle tuning for bi-arch i[34567]86-*-linux* like that for
        i[34567]86-*-solaris2.1[0-9]*.
        * config/i386/linux64.h (TARGET_VERSION, MULTILIB_DEFAULTS):
        Define conditionally depending on TARGET_64BIT_DEFAULT.
        (SPEC_32, SPEC_64): Define.
        (LINK_SPEC): Use them.
        * doc/install.texi (--enable-targets=all): Document for x86-linux.

2006-10-29  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386-protos.h (ix86_expand_round): Declare.
        (ix86_expand_rounddf_32): Likewise.
        * config/i386/i386.c (ix86_expand_round): New function expanding
        round inline for SSE math and -fno-trapping-math and if not
        optimizing for size.
        (ix86_expand_rounddf_32): Same for DFmode on 32bit archs.
        * config/i386/i386.md (rounddf2, roundsf2): New pattern expanding
        round via ix86_expand_round.

2006-10-29  Richard Guenther  <rguenther@suse.de>

        * config/i386/i386-protos.h (ix86_expand_floorceil): Declare.
        (ix86_expand_floorceildf_32): Likewise.
        * config/i386/i386.c (ix86_expand_sse_compare_mask): New
        static helper function.
        (ix86_expand_floorceil): Expander for floor and ceil to SSE
        math.
        (ix86_expand_floorceildf_32): Same for DFmode on 32bit archs.
        * config/i386/i386.md (floordf2): Adjust to enable floor
        expansion via ix86_expand_floorceil if TARGET_SSE_MATH and
        -fno-trapping-math is enabled and if not optimizing for size.
        (floorsf2, ceildf2, ceilsf2): Likewise.
        * config/i386/sse.md (sse_maskcmpsf3): New insn.
        (sse2_maskcmpdf3): Likewise.

2006-10-29  Richard Guenther  <rguenther@suse.de>

        * builtins.c (expand_builtin_mathfn): Expand nearbyint as
        rint in case -fno-trapping-math is enabled.
        * config/i386/i386-protos.h (ix86_expand_rint): Declare.
        * config/i386/i386.c (ix86_gen_TWO52): New static helper function.
        (ix86_expand_sse_fabs): Likewise.
        (ix86_expand_rint): New function expanding rint to x87 or SSE math.
        * config/i386/i386.md (rintdf2): Enable for SSE math if
        -fno-trapping-math is enabled, use ix86_expand_rint for expansion.
        (rintsf2): Likewise.

2006-10-29  Richard Guenther  <rguenther@suse.de>

        * genopinit.c (optabs): Change lfloor_optab and lceil_optab
        to conversion optabs.
        * optabs.c (init_optabs): Initialize lfloor_optab and lceil_optab
        as conversion optab.
        * optabs.h (enum optab_index): Remove OTI_lfloor and OTI_lceil.
        (enum convert_optab_index): Add COI_lfloor and COI_lceil.
        (lfloor_optab, lceil_optab): Adjust defines.
        * builtins.c (expand_builtin_int_roundingfn): Adjust for
        lfloor and lceil optabs now being conversion optabs.
        * config/i386/i386-protos.h (ix86_expand_lfloorceil): Declare.
        * config/i386/i386.c (ix86_expand_sse_compare_and_jump):
        New static helper function.
        (ix86_expand_lfloorceil): New function to expand lfloor and
        lceil inline.
        * config/i386/i386.md (lfloor<mode>2): Split into ...
        (lfloorxf<mode>2): ... x87 variant
        (lfloor<mode>di2, lfloor<mode>si2): ... and SSE variants
        using ix86_expand_lfloorceil.
        (lceil<mode>2, lceilxf<mode>2, lceil<mode>di2, lceil<mode>si2):
        Likewise.
        * doc/md.texi (lfloorMN, lceilMN): Document.

2006-10-29  Richard Sandiford  <richard@codesourcery.com>

        * configure.ac (HAVE_AS_NO_SHARED): New AC_DEFINE.  Test for the
        -mno-shared assembler option on mips targets.
        * configure, config.in: Regenerate.
        * config/mips/linux.h (NO_SHARED_SPECS): New macro.
        (DRIVER_SELF_SPECS): Define to NO_SHARED_SPECS if non-empty.
        * config/mips/linux64.h (DRIVER_SELF_SPECS): Include NO_SHARED_SPECS.

2006-10-29  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.c (mips_classify_symbol): Test DECL_WEAK as well
        as TREE_PUBLIC when deciding whether to return SYMBOL_GOT_GLOBAL.

2006-10-29  Kazu Hirata  <kazu@codesourcery.com>

        * config/darwin.c, config/darwin.opt, config/ia64/itanium1.md,
        config/ia64/itanium2.md, real.c, tree-ssa-structalias.c: Fix
        comment typos.

2006-10-28  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (do_mpfr_arg2, fold_builtin_hypot): New.
        (fold_builtin_pow): Evaluate constant arguments at compile-time
        using MPFR.
        (fold_builtin_1): Handle BUILT_IN_ATAN2 and BUILT_IN_HYPOT.
        (do_mpfr_ckconv): New helper function.
        (do_mpfr_arg1): Use do_mpfr_ckconv.
        (do_mpfr_arg2): New.

2006-10-28  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        PR tree-opt/29271
        * doc/invoke.texi (-fdump-rtl-sched2) Fix file extension number.
        (-fdump-rtl-sched): Rename to ..
        (-fdump-rtl-sched1): here.  Also fix file extension number.

2006-10-28  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (maybe_canonicalize_comparison): Fix code
        to match comment.

2006-10-28  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.h (GENERAL_REGNO_P): Use STACK_POINTER_REGNUM.
        (NON_QI_REG_P): Use IN_RANGE.
        (REX_INT_REGNO_P): Use IN_RANGE.
        (FP_REGNO_P): Use IN_RANGE.
        (SSE_REGNO_P): Use IN_RANGE.
        (REX_SSE_REGNO_P): Use IN_RANGE.
        (MMX_REGNO_P): Use IN_RANGE.
        (STACK_REGNO_P): New macro.
        (STACK_REG_P): Use STACK_REGNO_P.
        (NON_STACK_REG_P): Use STACK_REGNO_P.
        (REGNO_OK_FOR_INDEX_P): Use REX_INT_REGNO_P.
        (REGNO_OK_FOR_BASE_P): Use GENERAL_REGNO_P.
        (REG_OK_FOR_INDEX_NONSTRICT_P): Use REX_INT_REGNO_P.
        (REG_OK_FOR_BASE_NONSTRICT_P): Use GENERAL_REGNO_P.
        (HARD_REGNO_RENAME_OK): Use !IN_RANGE.

2006-10-28  Eric Botcazou  <ebotcazou@adacore.com>

        * except.h (output_function_exception_table): Add 'const char*' param.
        * except.c (switch_to_exception_section): Add 'const char*' param.
        If named sections are supported and HAVE_LD_EH_GC_SECTIONS is defined
        and flag_function_sections is set, use a function-specific section.
        (output_function_exception_table): Add 'const char*' param.
        Adjust call to switch_to_exception_section.
        * final.c (rest_of_handle_final): Adjust calls to
        output_function_exception_table.
        * configure.ac (HAVE_LD_EH_GC_SECTIONS): New check.
        * config.in: Regenerate.
        * configure: Likewise.

2006-10-28  Richard Guenther  <rguenther@suse.de>

        PR middle-end/26899
        * fold-const.c (maybe_canonicalize_comparison_1): Helper
        for maybe_canonicalize_comparison.
        (maybe_canonicalize_comparison): New function for canonicalizing
        comparison trees.
        (fold_comparison): Call it to canonicalize comparisons with
        constants involved.

2006-10-28  Richard Guenther  <rguenther@suse.de>

        PR target/28806
        * builtins.c (expand_builtin_int_roundingfn_2): Expand
        BUILT_IN_LROUND and BUILT_IN_LLROUND from here.
        (expand_builtin): Adjust likewise.
        * genopinit.c (optabs[]): Add lround optab.
        * optabs.c (init_optabs): Initialize lround_optab.
        * optabs.h (enum convert_optab_index): Add COI_lround.
        (lround_optab): Define.
        * config/i386/i386-protos.h (ix86_expand_lround): Declare.
        * config/i386/i386.c (ix86_sse_copysign_to_positive): New
        static function.
        (ix86_expand_lround): New function.
        * config/i386/i386.md (lround<mode>di2, lround<mode>si2):
        New expanders.
        * doc/md.texi (lroundMN2): Document.

2006-10-28 Uros Bizjak <uros@kss-loka.si>

        PR target/29377
        * config/h8300/h8300.c (h8300_emit_stack_adjustment): Change "size"
        argument to HOST_WIDE_INT.  Update function prototype.
        (round_frame_size): Change return type to HOST_WIDE_INT.  Change
        "size" argument to HOST_WIDE_INT.  Update function prototype.

2006-10-28 Uros Bizjak <uros@kss-loka.si>

        * config/i386/i386.c (output_387_ffreep): Create output from a
        template string for !HAVE_AS_IX86_FFREEP.

2006-10-27  Eric Christopher  <echristo@apple.com>

        * config/darwin.c: Fix formatting and grammar.

2006-10-27  Jan Hubicka  <jh@suse.cz>

        * builtins.c (fold_builtin): Don't generate NOP_EXPR that is going
        to be thrown away soon when IGNORE is set.
        * tree-ssa-ccp.c (convert_to_gimple_builtin): Add IGNORE argument
        indicating when return value shall not be computed.
        * gimplify.c (internal_get_tmp_var): Avoid random tree sharing.

2006-10-27  Vladimir Makarov  <vmakarov@redhat.com>

        * config/i386/i386.h (TARGET_GEODE):
        (TARGET_CPU_CPP_BUILTINS): Add code for geode.
        (TARGET_CPU_DEFAULT_geode): New macro.
        (TARGET_CPU_DEFAULT_k6, TARGET_CPU_DEFAULT_k6_2,
        TARGET_CPU_DEFAULT_k6_3, TARGET_CPU_DEFAULT_athlon,
        TARGET_CPU_DEFAULT_athlon_sse, TARGET_CPU_DEFAULT_k8,
        TARGET_CPU_DEFAULT_pentium_m, TARGET_CPU_DEFAULT_prescott,
        TARGET_CPU_DEFAULT_nocona, TARGET_CPU_DEFAULT_generic): Increase
        the macro values.
        (TARGET_CPU_DEFAULT_NAMES): Add geode.
        (processor_type): Add PROCESSOR_GEODE.

        * config/i386/i386.md: Include geode.md.
        (cpu): Add geode.

        * config/i386/i386.c (geode_cost): New initialized global
        variable.
        (m_GEODE, m_K6_GEODE): New macros.
        (x86_use_leave, x86_push_memory, x86_deep_branch, x86_use_sahf,
        x86_use_himode_fiop, x86_promote_QImode, x86_add_esp_4,
        x86_add_esp_8, x86_rep_movl_optimal, x86_ext_80387_constants,
        x86_schedule): Use m_K6_GEODE instead of m_K6.
        (x86_movx, x86_cmove): Set up m_GEODE.
        (x86_integer_DFmode_moves): Clear m_GEODE.
        (processor_target_table): Add entry for geode.
        (processor_alias_table): Ditto.

        * config/i386/geode.md: New file.

        * doc/invoke.texi: Add entry about geode processor.

2006-10-27  Mike Stump  <mrs@apple.com>

        * config/darwin-c.c (darwin_cpp_builtins): Move __STATIC__ and
        __DYNAMIC__ from here back to ...
        * config/darwin.h (CPP_SPEC): ... here.

2006-10-26  Nathan Froyd  <froydnj@codesourcery.com>
            Nathan Sidwell  <nathan@codesourcery.com>

        * ggc-common.c (ggc_min_heapsize_heuristic): Be more conservative
        when choosing the minimum heapsize.

2006-10-26  Nathan Froyd <froydnj@codesourcery.com>

        * gcc/unwind-dw2.h: Move cfa-related variables into
        struct frame_state_reg_info to ensure that the CFA is properly
        handled when executing DW_CFA_{remember,restore}_state.
        * gcc/unwind-dw2.c, gcc/config/alpha/linux-unwind.h,
        gcc/config/alpha/vms-unwind.h, gcc/config/s390/tpf-unwind.h
        gcc/config/s390/linux-unwind.h, gcc/config/sparc/linux-unwind.h
        gcc/config/i386/linux-unwind.h, gcc/config/sh/linux-unwind.h
        gcc/config/rs6000/linux-unwind.h,
        gcc/config/rs6000/darwin-fallback.c, gcc/config/pa/linux-unwind.h,
        gcc/config/pa/hpux-unwind.h, gcc/config/mips/linux-unwind.h:
        Modify to use new cfa_* fields.

2006-10-26  Andreas Krebbel  <krebbel1@de.ibm.com>

        * config/s390/s390.c (s390_init_frame_layout): Check positive
        frame_size.

2006-10-26  Ben Elliston  <bje@au.ibm.com>

        * gimplify.c (get_name): Remove extraneous break.
        (gimplify_omp_for): Initialise ret with GS_OK.

2006-10-25  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/hpux.h: Define _INCLUDE__STDC_A1_SOURCE in C++.
        Add unix98.o to link line.

2006-10-25  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (fold_builtin_cbrt, fold_builtin_logarithm):
        Calculate compile-time constants using MPFR.
        (fold_builtin_1): Likewise handle BUILT_IN_ERF, BUILT_IN_ERFC,
        BUILT_IN_EXPM1 and BUILT_IN_LOG1P.

2006-10-25  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/lib2funcs.S: Use C-style comments.

2006-10-24  Nathan Froyd  <froydnj@codesourcery.com>

        * dwarf2out.c (gen_compile_unit_die): Use IS_ABSOLUTE_PATH.
        (file_table_relative_p): Likewise.
        (dwarf2out_finish): Likewise.
        (file_name_acquire): Use DIR_SEPARATOR and DIR_SEPARATOR_2.

2006-10-25  Daniel Berlin  <dberlin@dberlin.org>

        * tree-ssa-structalias.c (intra_create_variable_infos):
          Don't recreate nonlocal_all if it already exists.

2006-10-25  Richard Guenther  <rguenther@suse.de>

        PR target/28803
        * optabs.h (enum optab_index): Remove OTI_lrint.
        (enum convert_optab_index): Add COI_lrint.
        (lrint_optab): Adjust.
        (expand_sfix_optab): Declare.
        * optabs.c (expand_sfix_optab): New function.
        (init_optabs): Init lrint_optab as conversion optab.
        * genopinit.c (lrint_optab): Change to a conversion optab.
        * builtins.c (expand_builtin_int_roundingfn_2): Adjust to
        expansion via conversion optab.
        * config/i386/i386.md (*fistdi2_1): Remove
        flag_unsafe_math_optimizations guard.
        (fistdi2, fistdi2_with_temp, *fist<mode>2_1, fist<mode>2,
        fist<mode>2_with_temp): Likewise.
        (lrint<mode>2): Split into...
        (lrintxf<mode>2): ... x87 part
        (lrint<mode>di2, lrint<mode>si2): ... and SSE parts.
        * config/i386/sse.md (sse_cvtss2si_2, sse_cvtss2_siq_2,
        sse2_cvtsd2si_2, sse2_cvtsd2siq_2): New insns for
        UNSPEC_FIX_NOTRUNC matching non-vector float modes.
        * doc/md.texi (lrintMN2): Document.

2006-10-25  Uros Bizjak  <uros@kss-loka.si>

        PR target/28909
        * config/i386/sync.md ("sync_add<mode>", "sync_sub<mode>"):
        Use inc and dec instructions for TARGET_USE_INCDEC.
        ("*sync_compare_and_swap<mode>"): Fix -masm=intel template.
        ("sync_double_compare_and_swap<mode>"): Likewise.
        ("*sync_double_compare_and_swapdi_pic"): Likewise.
        ("*sync_compare_and_swap_cc<mode>"): Likewise.
        ("sync_double_compare_and_swap_cc<mode>"): Likewise.
        ("*sync_double_compare_and_swap_ccdi_pic"): Likewise.
        ("sync_old_add<mode>"): Likewise.
        ("sync_lock_test_and_set<mode>"): Likewise.
        ("sync_lock_test_and_set<mode>"): Likewise.
        ("sync_add<mode>"): Likewise.
        ("sync_sub<mode>"): Likewise.
        ("sync_ior<mode>"): Likewise.
        ("sync_and<mode>"): Likewise.
        ("sync_xor<mode>"): Likewise.

2006-10-25  Uros Bizjak  <uros@kss-loka.si>

        * optabs.h (enum optab_index): Rename OTI_drem to OTI_remainder.
        (remainder_optab): Define corresponding macro.
        (drem_optab): Remove.
        * optabs.c (init_optabs): Initialize remainder_optab.  Remove
        drem_optab initialization.
        * genopinit.c (optabs): Implement remainder_optab using
        remainder?f3 patterns.  Remove drem_optab.
        * builtins.c (expand_builtin_mathfn_2): Handle
        BUILT_IN_REMAINDER{,F,L} using remainder_optab.
        (expand_builtin): Expand BUILT_IN_REMAINDER{,F,L} using
        expand_builtin_mathfn_2.

        (expand_builtin) [BUILT_IN_FMOD, BUILT_IN_DREM]: Do not
        depend on flag_unsafe_math_optimizations.

        * config/i386/i386.md ("remaindersf3", "remainderdf3")
        ("remainderxf3"): Renamed from "drem{s,d,x}f3" expanders.
        Do not depend on flag_unsafe_math_optimizations.  Use
        truncxf?f expander instead of truncxf?f_i387_noop.

        ("fpremxf4", "fprem1xf4"): Do not depend on
        flag_unsafe_math_optimizations.
        ("fmodsf3", "fmoddf3", "fmodxf3"): Do not depend on
        flag_unsafe_math_optimizations.  Use truncxf?f expander
        instead of truncxf?f_i387_noop.

        * doc/md.texi (fmod, remainder): Document standard named pattern.

2006-10-24  Richard Sandiford  <richard@codesourcery.com>
            David Daney  <ddaney@avtrex.com>

        PR middle-end/29519
        * rtlanal.c (nonzero_address_p):  Remove check for values wrapping.

2006-10-25  Ben Elliston  <bje@au.ibm.com>

        * doc/extend.texi (Variable Attributes): Typo fix.

2006-10-24  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.h (FIRST_PSEUDO_REGISTER): Define to 54.
        (FIXED_REGISTERS, CALL_USED_REGISTERS): Add fpcr register.
        (REG_ALLOC_ORDER): Add one element to allocate fpcr register.
        (FRAME_POINTER_REGNUM): Update register number to 21.
        (REG_CLASS_CONTENTS): Update contents for added fpcr register.
        (HI_REGISTER_NAMES): Add "fpcr" for fpcr register.

        * config/i386/i386.c (regclass_map): Add fpcr entry.
        (dbx_register_map, dbx64_register_map, svr4_dbx_register_map):
        Add fpcr entry.
        (print_reg): Assert REGNO (x) != FPCR_REG.

        * config/i386/i386.md (FPCR_REG, R11_REG): New constants.
        (DIRFLAG_REG): Renumber.
        (x86_fnstcw_1, x86_fldcw_1): Use FPCR_REG instead of FPSR_REG.
        (*sibcall_1_rex64_v, *sibcall_value_1_rex64_v): Use R11_REG.
        (sse_prologue_save, *sse_prologue_save_insn): Renumber
        hardcoded SSE register numbers.

        * config/i386/mmx.md (mmx_emms, mmx_femms): Renumber
        hardcoded MMX register numbers.

2006-10-24  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (fold_builtin_sin, fold_builtin_atan): Remove.
        (do_mpfr_arg1): Add `min', `max' and `inclusive' arguments.
        Update all callers.
        (BUILT_IN_SIN, BUILT_IN_ATAN): Handle in main switch.
        (BUILT_IN_ASIN, BUILT_IN_ACOS, BUILT_IN_ATAN, BUILT_IN_ASINH,
        BUILT_IN_ACOSH, BUILT_IN_ATANH, BUILT_IN_SINH, BUILT_IN_COSH,
        BUILT_IN_TANH): Calculate compile-time arguments using MPFR.

2006-10-24  Richard Guenther  <rguenther@suse.de>

        PR middle-end/28796
        * builtins.c (fold_builtin_classify): Use HONOR_INFINITIES
        and HONOR_NANS instead of MODE_HAS_INFINITIES and MODE_HAS_NANS
        for deciding optimizations in consistency with fold-const.c
        (fold_builtin_unordered_cmp): Likewise.

2006-10-24  Richard Guenther  <rguenther@suse.de>

        * builtins.c (fold_builtin_floor): Fold floor (x) where
        x is nonnegative to trunc (x).
        (fold_builtin_int_roundingfn): Fold lfloor (x) where x is
        nonnegative to FIX_TRUNC_EXPR.

2006-10-24  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/29567
        * tree-vrp.c (register_edge_assert_for_1): Fix wrong logic
        for TRUTH_NOT_EXPR.  Clarify comments.

2006-10-24  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (fold_builtin_exponent): Evaluate constant arguments
        at compile-time using MPFR.  Change parameter VALUE to FUNC,
        update all callers.
        (do_mpfr_arg1): Rename `exact' to `inexact'.  Carefully check
        for overflow and underflow at all times and avoid folding in
        those cases.

2006-10-24  Ben Elliston  <bje@au.ibm.com>

        * reload1.c: Formatting fixes.

2006-10-23  Zdenek Dvorak <dvorakz@suse.cz>

        PR tree-optimization/14784
        * tree-flow.h (struct var_ann_d): Add is_heapvar bit.
        * tree-ssa-structalias.c (get_constraint_for,
        intra_create_variable_infos): Set is_heapvar.
        * tree-ssa-operands.c (access_can_touch_variable): Do not handle
        non-heapvar pointer variables specially.

2006-10-23  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR middle-end/29335
        * builtins.c (fold_builtin_sin, fold_builtin_cos,
        fold_builtin_tan): Fold all constant arguments.  Take a "type"
        argument as necessary.
        (do_mpfr_arg1): New.
        * real.c, real.h (real_from_mpfr, mpfr_from_real): New.

2006-10-23  Bob Wilson  <bob.wilson@acm.org>

        * config/xtensa/lib1funcs.asm: Use C-style comments.

2006-10-23 Rafael Avila de Espindola  <rafael.espindola@gmail.com>

        * tree.c (local_define_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * c-objc-common.h (LANG_HOOKS_BUILTIN_FUNCTION): Define as
        c_builtin_function.
        * c-tree.h (builtin_function): Rename to c_builtin_function. Change
        the signature.
        * c-decl.c (builtin_function): Rename to c_builtin_function. Move
        common code to add_builtin_function.
        * langhooks.c (add_builtin_function): New function.
        (lhd_builtin_function): New function.
        * langhooks.h (struct lang_hooks): Change the signature of
        builtin_function.
        (add_builtin_function): New function.
        * tree-ssa-loop-prefetch.c (tree_ssa_prefetch_arrays): Replace
        calls to lang_hooks.builtin_function with add_builtin_function.
        * c-common.c (decl_builtin_1): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/alpha/alpha.c (alpha_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/frv/frv.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/s390/s390.c (s390_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/sparc/sparc.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/i386/i386.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/sh/sh.c (sh_media_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/c4x/c4x.c (c4x_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/stormy16/stormy16.c (xstormy16_init_builtins):
        Replace calls to lang_hooks.builtin_function with
        add_builtin_function.
        * config/iq2000/iq2000.c (def_builtin):
        Replace calls to lang_hooks.builtin_function with
        add_builtin_function.
        * config/ia64/ia64.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/rs6000/rs6000.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        (altivec_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/arm/arm.c (def_mbuiltin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        (arm_init_tls_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/mips/mips.c (mips_init_builtins): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * config/bfin/bfin.c (def_builtin): Replace calls to
        lang_hooks.builtin_function with add_builtin_function.
        * langhooks-def.h (lhd_builtin_function): New function.
        (LANG_HOOKS_BUILTIN_FUNCTION): Define as lhd_builtin_function.

2006-10-23  Jakub Jelinek  <jakub@redhat.com>

        * builtins.c (expand_builtin, maybe_emit_chk_warning): Handle
        BUILT_IN_STRNCAT_CHK.

2006-10-23  Jan Hubicka  <jh@suse.cz>

        * builtins.c (expand_builtin_memmove): Remove ORIG_EXP argument;
        don't do conversion from memmove to memcpy here.
        (expand_builtin_bcopy, expand_builtin): Update call of
        expand_builtin_memmove.
        (fold_builtin_memory_op): Do folding of memmove to memcpy here.

2006-10-23  Paul Brook  <paul@codesourcery.com>

        * stor-layout.c (start_record_layout): maximum_field_alignment
        overrides STRUCTURE_SIZE_BOUNDARY.

2006-10-23  Ulrich Weigand  <uweigand@de.ibm.com>

        * config/s390/predicates.md ("bras_sym_operand"): Do not accept
        nonlocal function symbols if flag_pic.

2006-10-23  Richard Guenther  <rguenther@suse.de>

        PR middle-end/27132
        PR middle-end/23295
        * builtins.c (fold_binary): Remove checks for flag_wrapv
        and flag_trapv where negate_expr_p covers these cases.

2006-10-23  Richard Guenther  <rguenther@suse.de>

        PR middle-end/29548
        * fold-const.c (fold_plusminus_mult_expr): Check exact power
        of two on the absolute value.
        (fold_binary): Fold x * -C to -x * C if x is easily negatable
        and negating -C does not overflow.

2006-10-23  Richard Guenther  <rguenther@suse.de>

        PR middle-end/21032
        * convert.c (convert_to_real): Fold (float)-x to -(float)x
        only if not flag_rounding_math.

2006-10-22  Richard Sandiford  <richard@codesourcery.com>
            Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/28232
        * config/sh/sh.c (expand_block_move): Use a BLKmode rather than
        SImode memory reference for the source of a movua.
        * config/sh/sh.md (UNSPEC_MOVUA): New macro.
        (movua): Use an unspec instead of sign_extract.  Expect the source
        to have mode BLKmode.
        (extv, insv): Use a BLKmode rather than SImode memory reference
        for the source of a movua.

2006-10-22  Jeff Law  <law@redhat.com>
        Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/15911
        * tree-vrp.c (extract_code_and_val_from_cond): New function.
        (register_edge_assert_for_1): Likewise.
        (register_edge_assert_for): Handle &&/&/||/| in conditionals.
        (find_conditional_asserts): Adjust for new function signature.
        (find_assert_locations): Likewise.

2006-10-22  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/tmmintrin.h: Remove the duplicated content.

2006-10-22  H.J. Lu  <hongjiu.lu@intel.com>

        * config.gcc (i[34567]86-*-*): Add tmmintrin.h to extra_headers.
        (x86_64-*-*): Likewise.

        * config/i386/i386.c (pta_flags): Add PTA_SSSE3.
        (override_options): Check SSSE3.
        (ix86_builtins): Add IX86_BUILTIN_PHADDW, IX86_BUILTIN_PHADDD,
        IX86_BUILTIN_PHADDSW, IX86_BUILTIN_PHSUBW, IX86_BUILTIN_PHSUBD,
        IX86_BUILTIN_PHSUBSW, IX86_BUILTIN_PMADDUBSW,
        IX86_BUILTIN_PMULHRSW, IX86_BUILTIN_PSHUFB,
        IX86_BUILTIN_PSIGNB, IX86_BUILTIN_PSIGNW, IX86_BUILTIN_PSIGND,
        IX86_BUILTIN_PALIGNR, IX86_BUILTIN_PABSB, IX86_BUILTIN_PABSW,
        IX86_BUILTIN_PABSD, IX86_BUILTIN_PHADDW128,
        IX86_BUILTIN_PHADDD128, IX86_BUILTIN_PHADDSW128,
        IX86_BUILTIN_PHSUBW128, IX86_BUILTIN_PHSUBD128,
        IX86_BUILTIN_PHSUBSW128, IX86_BUILTIN_PMADDUBSW128,
        IX86_BUILTIN_PMULHRSW128, IX86_BUILTIN_PSHUFB128,
        IX86_BUILTIN_PSIGNB128, IX86_BUILTIN_PSIGNW128,
        IX86_BUILTIN_PSIGND128, IX86_BUILTIN_PALIGNR128,
        IX86_BUILTIN_PABSB128, IX86_BUILTIN_PABSW128 and
        IX86_BUILTIN_PABSD128.
        (bdesc_2arg): Add SSSE3.
        (bdesc_1arg): Likewise.
        (ix86_init_mmx_sse_builtins): Support SSSE3.
        (ix86_expand_builtin): Likewise.
        * config/i386/i386.h (TARGET_CPU_CPP_BUILTINS): Likewise.

        * config/i386/i386.md (UNSPEC_PSHUFB): New.
        (UNSPEC_PSIGN): Likewise.
        (UNSPEC_PALIGNR): Likewise.
        Include mmx.md before sse.md.

        * config/i386/i386.opt: Add -mssse3.

        * config/i386/sse.md (ssse3_phaddwv8hi3): New pattern for SSSE3.
        (ssse3_phaddwv4hi3): Likewise.
        (ssse3_phadddv4si3): Likewise.
        (ssse3_phadddv2si3): Likewise.
        (ssse3_phaddswv8hi3): Likewise.
        (ssse3_phaddswv4hi3): Likewise.
        (ssse3_phsubwv8hi3): Likewise.
        (ssse3_phsubwv4hi3): Likewise.
        (ssse3_phsubdv4si3): Likewise.
        (ssse3_phsubdv2si3): Likewise.
        (ssse3_phsubswv8hi3): Likewise.
        (ssse3_phsubswv4hi3): Likewise.
        (ssse3_pmaddubswv8hi3): Likewise.
        (ssse3_pmaddubswv4hi3): Likewise.
        (ssse3_pmulhrswv8hi3): Likewise.
        (ssse3_pmulhrswv4hi3): Likewise.
        (ssse3_pshufbv16qi3): Likewise.
        (ssse3_pshufbv8qi3): Likewise.
        (ssse3_psign<mode>3): Likewise.
        (ssse3_psign<mode>3): Likewise.
        (ssse3_palignrti): Likewise.
        (ssse3_palignrdi): Likewise.
        (abs<mode>2): Likewise.
        (abs<mode>2): Likewise.

        * config/i386/tmmintrin.h: New file.

        * doc/extend.texi: Document SSSE3 built-in functions.

        * doc/invoke.texi: Document -mssse3/-mno-ssse3 switches.

2006-10-22  Ira Rosen  <irar@il.ibm.com>

        * tree-vect-transform.c (vectorizable_load): Use the type of the
        return value of the mask_for_load builtin to create realign_load
        stmt.

2006-10-22  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.c (mips_split_const): Don't accept bare PLUS
        expressions.

2006-10-21  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.md (UNSPEC_LDQQU): Renamed to ...
        (UNSPEC_LDDQU): This.
        * config/i386/sse.md (sse3_lddqu): Updated.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        * builtins.c (expand_builtin_int_roundingfn_2): New function.
        (expand_builtin): Use it to expand lrint instead of
        expand_builtin_mathfn.

2006-10-21  Uros Bizjak  <uros@kss-loka.si>

        PR middle-end/28252
        * builtins.c (fold_builtin): Fold pow(x,1.0/3.0) as cbrt(x) if
        flag_unsafe_math_optimizations is set.

2006-10-21  Uros Bizjak  <uros@kss-loka.si>

        PR target/19398
        * config/i386/i386.md (fix_trunc?f?i_sse): Add peephole2
        patterns to use memory input operand in x87->mem->XMM
        reload sequences.  Skip transformation for TARGET_K8.

2006-10-21  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/i386.md (extendsfdf2, extendsfxf2, extenddfxf2): Do not
        force operand1 to register if both operands are memory operands.
        (*extendsfdf2_mixed, *extendsfdf2_sse, *extendsfdf2_i387)
        (*extendsfxf2_i387, *extenddfxf2_i387): Do not disable pattern
        if both operands are memory operands.
        (truncdfsf2): Do not force operand1 to register if both operands
        are memory operands.

2006-10-21  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * Makefile.in (LIBS): Add $(GMPLIBS).
        * doc/install.texi: Update GMP and MPFR requirements.
        * doc/sourcebuild.texi (need_gmp): Delete.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/3511
        * tree-ssa-pre.c (phi_translate): Fold CALL_EXPRs that
        got new invariant arguments during PHI translation.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        PR middle-end/26898
        * fold-const.c (fold_comparison): Fold signed comparisons
        of the form X +- C1 CMP Y +- C2.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        PR target/19116
        * config/i386/i386.c (override_options): Do not set MASK_IEEE_FP
        if flag_unsafe_math_optimizations is specified.  We have
        flag_finite_math_only for that.
        * config/i386/i386.md (sqrtxf2): Do not require TARGET_IEEE_FP
        or flag_unsafe_math_optimizations.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        * builtins.c (fold_builtin_classify): Fix typo.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        PR middle-end/28796
        * simplify-rtx.c (simplify_const_relational_operation):
        Do not constant-fold ORDERED and UNORDERED for
        flag_unsafe_math_optimizations but only we do not need to
        honor NaNs for the given mode.

2006-10-21  Richard Guenther  <rguenther@suse.de>

        PR target/29512
        * config/i386/i386.c (classify_argument): Remove redundant
        walking of the BINFOs.
        (contains_128bit_aligned_vector_p): Likewise.

2006-10-20  Mark Mitchell  <mark@codesourcery.com>

        * BASE-VER: Set to 4.3.0.

2006-10-20  Daniel Berlin  <dberlin@dberlin.org>

        * tree.h (DECL_PTA_ARTIFICIAL): Remove.
        (tree_decl_with_vis): Remove artificial_pta_var flag.
        * tree-flow.h (referenced_var_check_and_insert): Expose.
        (nonlocal_all): New prototype.
        * tree-ssa-structalias.c (nonlocal_for_type): Remove.
        (nonlocal_all): Make global.
        (nonlocal_lookup): Remove.
        (nonlocal_insert): Ditto.
        (create_nonlocal_var): Do not call nonlocal_insert.
        (get_nonlocal_id_for_type): Remove.
        (find_global_initializers): Mark new vars we find for renaming.
        (intra_create_variable_infos): Only create one nonlocal.
        (expand_nonlocal_solutions): Remove.
        (compute_points_to_sets): Don't call it.
        (ipa_pta_execute): Ditto.
        (init_alias_heapvars): Don't create nonlocal_for_type.
        (delete_alias_heapvars): Don't remove it.
        * tree-ssa-operands.c (access_can_touch_variable): Don't prune
        nonlocal_all.

2006-10-19  Brooks Moses  <bmoses@stanford.edu>

        * doc/install.texi (Downloading GCC): Clarify mention of
        Fortran in the "full distribution" description.

2006-10-19  Daniel Berlin  <dberlin@dberlin.org>

        Fix PR tree-optimization/28778
        Fix PR tree-optimization/29156
        Fix PR tree-optimization/29415
        * tree.h (DECL_PTA_ARTIFICIAL): New macro.
        (tree_decl_with_vis): Add artificial_pta_var flag.
        * tree-ssa-alias.c (is_escape_site): Remove alias info argument,
        pushed into callers.
        * tree-ssa-structalias.c (nonlocal_for_type): New variable.
        (nonlocal_all): Ditto.
        (struct variable_info): Add directly_dereferenced member.
        (var_escaped_vars): New variable.
        (escaped_vars_tree): Ditto.
        (escaped_vars_id): Ditto.
        (nonlocal_vars_id): Ditto.
        (new_var_info): Set directly_dereferenced.
        (graph_size): New variable
        (build_constraint_graph): Use graph_size.
        (solve_graph): Don't process constraints that cannot change the
        solution, don't try to propagate an empty solution to our
        successors.
        (process_constraint): Set directly_dereferenced.
        (could_have_pointers): New function.
        (get_constraint_for_component_ref): Don't process STRING_CST.
        (nonlocal_lookup): New function.
        (nonlocal_insert): Ditto.
        (create_nonlocal_var): Ditto.
        (get_nonlocal_id_for_type): Ditto.
        (get_constraint_for): Allow results vector to be empty in the case
        of string constants.
        Handle results of calls properly.
        (update_alias_info): Update alias info stats on number and type of
        calls.
        (find_func_aliases): Use could_have_pointers.
        (make_constraint_from_escaped): Renamed from
        make_constraint_to_anything, and changed to make constraints from
        escape variable.
        (make_constraint_to_escaped): New function.
        (find_global_initializers): Ditto.
        (create_variable_info_for): Make constraint from escaped to any
        global variable, and from any global variable to the set of
        escaped vars.
        (intra_create_variable_infos): Deal with escaped instead of
        pointing to anything.
        (set_uids_in_ptset): Do type pruning on directly dereferenced
        variables.
        (find_what_p_points_to): Adjust call to set_uids_with_ptset.
        (init_base_vars): Fix comment, and initialize escaped_vars.
        (need_to_solve): Removed.
        (find_escape_constraints): New function.
        (expand_nonlocal_solutions): Ditto.
        (compute_points_to_sets): Call find_escape_constraints and
        expand_nonlocal_solutions.
        (delete_points_to_sets): Don't fall off the end of the graph.
        (init_alias_heapvars): Initialize nonlocal_for_type and
        nonlocal_all.
        (delete_alias_heapvars): Free nonlocal_for_type and null out
        nonlocal_all.

2006-10-19  Eric Botcazou  <ebotcazou@adacore.com>

        * fold-const.c (add_double): Rename to add_double_with_sign.
        Add 'unsigned_p' parameter and take it into account for the overflow.
        (mul_double): Rename to mul_double_with_sign.
        Add 'unsigned_p' parameter and take it into account for the overflow.
        (fold_div_compare): Call add_double_with_sign instead of add_double
        and mul_double_with_sign instead of mul_double, passing them the
        unsignedness of the type.
        * tree.h (add_double): Macroize.
        (add_double_with_sign): New prototype.
        (mul_double): Macroize.
        (mul_double_with_sign): New prototype.

2006-10-19  Chen Liqin  <liqin@sunnorth.com.cn>

        * config/score/crti.asm: New file.
        * config/score/crtn.asm: New file.
        * config/score/elf.h: New file.
        * config/score/mac.md: New file.
        * config/score/misc.md: New file.
        * config/score/mul-div.S: New file.
        * config/score/predicates.md: New file.
        * config/score/score7.md: New file.
        * config/score/score.c: New file.
        * config/score/score-conv.h: New file.
        * config/score/score.h: New file.
        * config/score/score.md: New file.
        * config/score/score-mdaux.c: New file.
        * config/score/score-mdaux.h: New file.
        * config/score/score-modes.def: New file.
        * config/score/score.opt: New file.
        * config/score/score-protos.h: New file.
        * config/score/score-version.h: New file.
        * config/score/t-score-elf: New file.
        * config.gcc: Add score*-*-* configurations(Update before).
        * doc/invoke.texi (Score Options): New section.
        * doc/md.texi (Score family): New section to document constraints.

2006-10-19  Nick Clifton  <nickc@redhat.com>

        * config/arm/arm.c: Fix spelling typo.

2006-10-18  Tom Tromey  <tromey@redhat.com>

        * doc/install.texi (Prerequisites): Mention automake 1.9.6.

2006-10-18  Jan Hubicka  <jh@suse.cz>

        PR middle-end/29299
        * cfgexpand.c (expand_used_vars_for_block): Vars marked used by user
        are used.

2006-10-18  Marcin Dalecki  <martin@dalecki.de>

        * omp-low.c (expand_parallel_call): Use BSI_SAME_STMT instead of
        TSI_SAME_STMT, since that's the desired entity.

2006-10-17  Wolfgang Gellerich  <gellerich@de.ibm.com>

        * config/s390/contraints.md: New file.
        * config/s390/s390-protos.h (s390_mem_constraint,
        s390_O_constraint_str, s390_N_constraint_str,
        s390_float_const_zero_p): Function prototypes added.
        * config/s390/s390.c (s390_extra_constraint_str,
        s390_const_double_ok_for_constraint_p,
        s390_const_ok_for_constraint_p): Functions removed.
        (s390_mem_constraint, s390_O_constraint_str, s390_N_constraint_str,
        s390_float_const_zero_p): New functions.
        * config/s390/s390.h (REG_CLASS_FROM_LETTER, CONST_OK_FOR_CONSTRAINT_P,
        CONST_DOUBLE_OK_FOR_CONSTRAINT_P, EXTRA_CONSTRAINT_STR,
        EXTRA_MEMORY_CONSTRAINT, EXTRA_ADDRESS_CONSTRAINT, CONSTRAINT_LEN):
        Macro definitions removed.
        (s390_const_ok_for_constraint_p, s390_const_double_ok_for_constraint_p,
        s390_extra_constraint_str): Functions removed.

2006-10-17  Andrew Pinsiki  <pinskia@gmail.com>
            Richard Sandiford  <richard@codesourcery.com>

        PR target/29413
        * config/mips/linux.h (SUBTARGET_CC1_SPEC): Override.
        * config/mips/mips.h (CC1_SPEC): Override any earlier definition.

2006-10-16  Geoffrey Keating  <geoffk@apple.com>

        * config/rs6000/sysv4.h (DBX_REGISTER_NUMBER): Move to rs6000.h.
        (DWARF2_FRAME_REG_OUT): Likewise.
        * config/rs6000/rs6000.h (DBX_REGISTER_NUMBER): Move from sysv4.h.
        (DWARF2_FRAME_REG_OUT): Likewise.

2006-10-17  Paul Brook  <paul@codesourcery.com>

        * config/arm/arm.c (arm_rtx_costs_1): Handle multiply-accumulate.

2006-10-16  Brooks Moses  <bmoses@stanford.edu>

        * doc/contrib.texi, doc/install.texi, doc/standards.texi:
        Standardize on "GNU Fortran" as the official name of the Fortran
        compiler.

2006-10-16  Mike Stump  <mrs@apple.com>

        * doc/invoke.texi (Darwin Options): Document -mkernel.
        * config/rs6000/darwin.h (SUBTARGET_OVERRIDE_OPTIONS): Add
        -mkernel support.
        (C_COMMON_OVERRIDE_OPTIONS): Add -mkernel support.  Add
        SUBTARGET_C_COMMON_OVERRIDE_OPTIONS callout.
        (CC1_SPEC): Don't turn on -fPIC when -mkernel is given.
        (OS_MISSING_ALTIVEC): Add.
        * config/i386/i386.c (override_options): Add
        SUBSUBTARGET_OVERRIDE_OPTIONS callout.
        * config/i386/darwin.h (CC1_SPEC): Don't turn on -fPIC when
        -mkernel, -static or -mdynamic-no-pic is given.
        (C_COMMON_OVERRIDE_OPTIONS): Add.
        * config/darwin.opt (fapple-kext): Add.
        (mkernel): Add.
        * config/darwin.h (TARGET_OPTION_TRANSLATE_TABLE): Add
        -fapple-kext, -findirect-virtual-calls, -fterminated-vtables and
        -mkernel support.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Add.
        (SUBTARGET_C_COMMON_OVERRIDE_OPTIONS): Add.
        (CPP_SPEC): Move defines for __DYNAMIC__ and __STATIC__ from here...
        (SUBTARGET_ATTRIBUTE_TABLE): Add apple_kext_compatibility.
        (TARGET_CXX_CDTOR_RETURNS_THIS): Add.
        (flag_mkernel): Add.
        (flag_apple_kext): Add.
        (TARGET_KEXTABI): Add.
        * config/darwin.c (darwin_handle_kext_attribute): Add.
        (DARWIN_VTABLE_P): Add.
        (darwin_binds_local_p): Add partial support for rebinding vtables
        in kexts.
        (darwin_kextabi_p): Add.
        (darwin_override_options): Add.
        * config/darwin-protos.h (darwin_handle_kext_attribute): Add.
        (darwin_kextabi_p): Add.
        (darwin_override_options): Add.
        * config/darwin-c.c (darwin_cpp_builtins): ... move defines for
        __DYNAMIC__ and __STATIC__ here.

2006-10-16  Brooks Moses  <bmoses@stanford.edu>

        * doc/sourcebuild.texi, doc/makefile.texi, doc/install.texi:
        Added mention of "make pdf" target, and Texinfo requirements for
        same.

2006-10-16  DJ Delorie  <dj@redhat.com>

        * config/s390/s390.c (s390_decompose_address): Allow symbol+offset
        into the GOT in case we need a subreg of the address.

2006-10-16  Richard Guenther  <rguenther@suse.de>

        PR target/25519
        * doc/extend.texi (X86 Built-in Functions): Fix typos in
        SSE builtin documentation.  Document SSE2 builtins.

2006-10-15  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa64-hpux.h (LINK_SPEC): Force __cxa_finalize to be an undefined
        symbol in the output file for non-shared links when -nostdlib or
        -nodefaultlibs isn't specified.

        * config.gcc (hppa*64*-*-hpux11*, hppa[12]*-*-hpux11*): Default to
        posix thread support.

2006-10-15  Jan Hubicka  <jh@suse.cz>

        PR middle-end/29241
        * cgraphunit.c (cgraph_preserve_function_body_p): Preserve functions
        declared always_inline even when not inlining.

2006-10-15  Eric Botcazou  <ebotcazou@libertysurf.fr>
            John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
            Andrew Pinski  <pinskia@gmail.com>

        PR middle-end/29111
        * builtins.c (get_pointer_alignment): Return 0 if TER is not run.

2006-10-15  Jan Hubicka  <jh@suse.cz>
            Richard Guenther  <rguenther@suse.de>

        PR middle-end/29299
        * cgraphunit.c (cgraph_finalize_compilation_unit): Call
        process_function_and_variable_attributes on all variables, including
        those discovered during cgraph construction phase.

2006-10-15  Bernhard Fischer  <aldot@gcc.gnu.org>

        * final.c: Update Copyright year. Commentary typo fix. Fix whitespace

2006-10-14  Uros Bizjak  <uros@kss-loka.si>

        * config/i386/athlon.md (athlon_fist): Add fisttp.

2006-10-13  David Edelsohn  <edelsohn@gnu.org>
            Ian Lance Taylor  <ian@airs.com>

        PR middle-end/29250
        * expr.c (expand_expr_real_1) <NON_LVALUE_EXPR, NOP_EXPR,
        CONVERT_EXPR>: Change EXPAND_SUM modifier to EXPAND_NORMAL when
        recursing.

2006-10-14  Kazu Hirata  <kazu@codesourcery.com>

        * config/score/score.c, config/score/score.h: Fix comment
        typos.

2006-10-13  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        PR bootstrap/29402
        * Makefile.in (ALL_GTFILES_H): Use $(sort ...) instead of
        shell pipeline.

2006-10-13  Eric Christopher  <echristo@apple.com>

        * config/darwin.h (HANDLE_PRAGMA_PACK_PUSH_POP): Define.

2006-10-13  Carlos O'Donell  <carlos@codesourcery.com>

        Revert this change:
        2006-10-13  Carlos O'Donell  <carlos@codesourcery.com>
        * config/elfos.h (MAX_OFILE_ALIGNMENT): Default to largest
        alignment supported by 32-bit ELF.

2006-10-13  Eric Christopher  <echristo@apple.com>

        * config/darwin.c (darwin_emit_unwind_label): Strip
        name encoding. Use DECL_ASSEMBLER_NAME_SET_P.

2006-10-13  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/29446
        * tree-vrp.c (fix_equivalence_set): Remove.
        (extract_range_from_assert): Do not call fix_equivalence_set.
        (debug_value_range): Print a newline.
        (compare_name_with_value): For equivalence sets with
        inconsistent value ranges conservatively bail out.
        (compare_names): Likewise.

2006-10-13  David Edelsohn  <edelsohn@gnu.org>

        * doc/install.texi (*-ibm-aix*): Add comment about 32-bit GMP
        and MPFR for gfortran.

2006-10-13  Carlos O'Donell  <carlos@codesourcery.com>

        * config/elfos.h (MAX_OFILE_ALIGNMENT): Default to largest
        alignment supported by 32-bit ELF.

2006-10-13  Paolo Bonzini  <bonzini@gnu.org>

        PR c/29092

        * c-typeck.c (digest_init): Always allow initializing vectors
        that have static storage duration with compound literals.
        * tree.c (build_type_attribute_qual_variant): New, based on
        build_type_attribute_variant.
        (build_type_attribute_variant): Rewrite using the former.
        (make_vector_type): Use build_type_attribute_qual_variant to build
        type variants.  Use type_hash_canon on the others.

2006-10-13  Daniel Berlin <dberlin@dberlin.org>
            Ramana Radhakrishnan  <ramana.radhakrishnan@celunite.com>

        * tree-flow-inline.h (zero_ssa_operands): Fix comment.

2006-10-12  Jan Hubicka  <jh@suse.cz>

        PR c/28419
        * c-decl.c (c_make_fname_decl): Do not segfault in case where
        current_function_decl is set but current_function_scope is not.

2006-10-12  Jie Zhang  <jie.zhang@analog.com>

        * config/bfin/bfin.md (eh_return): Call emit_jump_insn instead of
        emit_insn to emit eh_return_internal instruction.
        (eh_return_internal): Explicitly set pc.

2006-10-11  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/28230
        * tree-vrp.c (vrp_int_const_binop): Move flag_wrapv handling
        to the correct place.

2006-10-11  Richard Guenther  <rguenther@suse.de>

        PR inline-asm/29119
        * gimplify.c (gimplify_asm_expr): Mark the gimplified lvalue
        addressable.

2006-10-10  Brooks Moses  <bmoses@stanford.edu>

        * configure.ac: Added pdf to "Make-hooks"
        * Makefile.in: Added TEXI2PDF definition, and various pdf-file
        targets and *.pdf file patterns in cleanup targets.
        * configure: Regenerated.

2006-10-10  Anatoly Sokolov <aesok@post.ru>

        * config/avr/predicates.md: New file.
        * config/avr/avr.md: Include it.
        (REG_SP): New constant.
        (peepholes): Use predicates.
        (sbrx_branch, sbrx_and_branchhi, sbrx_and_branchsi, branch, rvbranch,
        difficult_branch,  difficult_rvbranch, cbi, sbi, sbix_branch,
        sbix_branch_bit7, sbix_branch_tmp, sbix_branch_tmp_bit7): Ditto.

2006-10-10  Adam Nemet  <anemet@caviumnetworks.com>

        * config/mips/mips.c (mips_save_restore_reg): Use gen_frame_mem to
        avoid alias set 0.

2006-10-10  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/29272
        * builtins.c (var_decl_component_p): New function.
        (fold_builtin_memset, fold_builtin_memory_op): Restrict
        single entry optimization to variables and components thereof.

2006-10-10  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/29323
        * except.c (set_nothrow_function_flags): For functions
        that do not bind local bail out early.

2006-10-10  Ben Elliston  <bje@au.ibm.com>

        * doc/invoke.texi (RS/6000 and PowerPC Options): Add -m to the
        -mdlmzb option.

2006-10-09  Richard Henderson  <rth@redhat.com>

        Revert emutls patch.

2006-10-09  Richard Guenther  <rguenther@suse.de>

        PR middle-end/29254
        * cgraphunit.c (verify_cgraph_node): Bail out on earlier
        errors.

2006-10-09  Steve Ellcey  <sje@cup.hp.com>

        PR target/27880
        * unwind-c.c (PERSONALITY_FUNCTION): Ifdef use of _Unwind_GetIPInfo.
        * configure.ac (HAVE_GETIPINFO): Check for _Unwind_GetIPInfo.
        * configure: Regenerate.
        * config.in: Regenerate.

2006-10-09  Aldy Hernandez  <aldyh@redhat.com>

        * tree-mudflap.c (mf_xform_derefs_1): Add parentheses around TREE_TYPE.

2006-10-08  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.c (mips_legitimize_tls_address): Implement
        all TLS models in the same way as local exec if !TARGET_ABICALLS.
        Remove stray newline.

2006-10-08  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/mips.c (mips_classify_symbol): Do not return
        SYMBOL_SMALL_DATA if SYMBOL_REF_WEAK.
        (mips_in_small_data_p): Tweak comments.

2006-10-08  Richard Sandiford  <richard@codesourcery.com>

        * config/mips/elf.h (HANDLE_PRAGMA_PUSH_POP): Define.

2006-10-07  Kazu Hirata  <kazu@codesourcery.com>

        * gimplify.c, sched-int.h: Fix comment typos.

        * sched-int.h: Fix comment typos.

2006-10-06  Maxim Kuvyrkov  <mkuvyrkov@ispras.ru>

        * sched-int.h (IS_SPECULATION_CHECK_P, IS_SPECULATION_SIMPLE_CHECK_P):
        New macros.
        * sched-ebb.c (begin_schedule_ready): Use them.
        * haifa-sched.c (schedule_insn, move_insn, try_ready,
        add_to_speculative_block, create_check_block_twin, speculate_insn,
        fix_jump_move, move_block_after_check): Ditto.
        * sched-rgn.c (new_ready): Ditto.

2006-10-06  Maxim Kuvyrkov  <mkuvyrkov@ispras.ru>

        PR rtl-optimization/29128
        * sched-int.h (IS_SPECULATION_BRANCHY_CHECK_P): New macro.
        * sched-ebb.c (advance_target_bb): Use it to fix condition to
        allow interblock movement of speculation checks.

2006-10-06  Zdenek Dvorak <dvorakz@suse.cz>

        PR middle-end/29256
        * tree-ssa-loop-ivopts.c (determine_base_object): Handle pointers
        casted to integer type.
        (get_address_cost): Decrease cost of [symbol + index] addressing modes
        if they are significantly more expensive than [reg + index] ones.

2006-10-06  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/29330
        * tree-data-ref.c (free_data_ref): Use DR_FREE_ACCESS_FNS macro.
        (initialize_data_dependence_relation): Clear DDR_LOOP_NEST pointer
        on newly allocated ddrs.
        (find_loop_nest_1, find_loop_nest): Change LOOP_NEST to a pointer
        to VEC (loop_p, heap) pointer.
        (compute_data_dependences_for_loop): Adjust caller.
        (free_dependence_relations): Free DDR_LOOP_NEST.

        * tree-loop-linear.c (linear_transform_loops): Don't forget to
        free DEPENDENCE_RELATIONS and DATAREFS.

        PR target/28924
        * builtins.c (expand_builtin_sync_operation,
        expand_builtin_compare_and_swap, expand_builtin_lock_test_and_set):
        Use convert_to_mode to handle promoted arguments.

2006-10-06  J"orn Rennecke  <joern.rennecke@st.com>