[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2010-05-08  Richard Guenther  <rguenther@suse.de>

        * lto-wrapper.c (run_gcc): Remove linker output from
        command line for LTRANS invocation.

2010-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        * config.gcc (i[34567]86-*-darwin*, x86_64-*-darwin*): Add
        lto-macho as lto_binary_reader.
        * target.h (struct gcc_target): New hooks lto_start and lto_end.
        * target-def.h (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Define.
        * cgraphunit.c (ipa_passes): Wrap LTO assembler output generation
        in lto_start and lto_end calls.
        (is_elf_or_coff): Rename to maybe_lto_object_file.  Add Mach-O
        magic numbers.
        (scan_prog_file): Update is_elf_or_coff call.
        * doc/tm.text (TARGET_ASM_LTO_START, TARGET_ASM_LTO_END): Document.

        * collect2.c (main): Fix enum comparison.

        * config/darwin-protos.h (darwin_asm_lto_start, darwin_asm_lto_end):
        Add prototypes.
        * darwin9.h (LINK_COMMAND_SPEC): Pass -flto and -fwhopr to the linker.
        * darwin.h (LINK_COMMAND_SPEC): Likewise.  Define TARGET_ASM_LTO_START
        and TARGET_ASM_LTO_END.
        * darwin.c: Include obstack.h and lto-streamer.h.
        (lto_section_names_offset, lto_section_names_obstack,
        lto_asm_out_file, lto_asm_out_name, saved_asm_out_file): New static
        global variables.
        (LTO_SEGMENT_NAME, LTO_NAMES_SECTION): New defines.
        (darwin_asm_lto_start): New function.  Redirect output to asm_out_file
        to a temporary file.
        (darwin_asm_lto_end): New function.  Restore asm_out_file.
        (darwin_asm_named_section): For LTO sections, replace the name with
        the offset of the section name in a string table, and build this
        table.
        (darwin_file_start): Initialize global vars for LTO support.
        (darwin_file_end): If output to asm_out_file was redirected, append it
        to the proper asm_out_file here.  Add the section names section.

2010-05-07  Steven Bosscher  <steven@gcc.gnu.org>

        * c-pragma.c (pending_weak_d, pending_weak): New.
        (pending_weaks): Change the type to VEC((pending_weak,gc) *.
        (maybe_apply_pragma_weak, maybe_apply_pending_pragma_weaks,
        handle_pragma_weak): Update the uses of pending_weaks.

2010-05-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        PR documentation/44016
        * doc/standards.texi (Standards): Link to unversioned
        cxx0x_status.html page.

2010-05-07  Iain Sandoe <iains@gcc.gnu.org>

        PR target/43708
        * config/darwin-c.c (darwin_pragma_unused): Set DECL_READ_P
        in addition to TREE_USED, to avoid "set but unused" warnings.

2010-05-07  Changpeng Fang  <changpeng.fang@amd.com>

        * tree-ssa-loop-prefetch.c (TRIP_COUNT_TO_AHEAD_RATIO): New.
        (is_loop_prefetching_profitable): Do not insert prefetches
        when the trip count is not at least TRIP_COUNT_TO_AHEAD_RATIO
        times the prefetch ahead distance.

2010-05-07  Changpeng Fang  <changpeng.fang@amd.com>

        * tree-ssa-loop-prefetch.c (is_loop_prefetching_profitable):
        Account for loop unrolling in the insn-to-prefetch ratio heuristic.
        (loop_prefetch_arrays): Pass to is_loop_prefetching_profitable
        the unroll_factor.

2010-05-07  Changpeng Fang  <changpeng.fang@amd.com>

        * tree-ssa-loop-prefetch.c (is_loop_prefetching_profitable): Dump
        a diagnostic info when the insn-to-mem ratio is too small.

2010-05-07  Richard Guenther <rguenther@suse.de>

        * gcc.c (LINK_COMMAND_SPEC): Provide a resolution file to
        the linker plugin.
        (store_arg): Queue temp_filename for deletion instead of
        the whole argument.

2010-05-07  Richard Guenther  <rguenther@suse.de>

        * lto-wrapper.c (DUMPBASE_SUFFIX): Define.
        (run_gcc): Handle LTRANS phase invocation.
        * collect2.c (maybe_run_lto_and_relink): Do not set
        WPA_SAVE_LTRANS.

2010-05-07  Jakub Jelinek  <jakub@redhat.com>

        * tree.h (TREE_ADDRESSABLE): Adjust comment to say that
        this is also meaningful on PARM_DECLs and RESULT_DECLs.

2010-05-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/mips/iris6.h (LINK_SPEC): Don't pass -init, -fini with -r.

2010-05-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/44020
        * tree-ssa-pre.c (execute_pre): Do not remove dead inserted
        code when PRE is not yet initialized.

2010-05-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/mips/dbxmdebug.h: Remove.
        * config.gcc (mips-sgi-irix6.5*): Remove mips/dbxmdebug.h.

2010-05-07  Shujing Zhao  <pearly.zhao@oracle.com>

        * c-typeck.c (build_binary_op): Warn ordered comparison of pointer
        with null pointer and also warn about ordered comparison of zero with
        pointer if -Wextra.

2010-05-05  Andreas Simbuerger  <simbuerg@fim.uni-passau.de>

        * graphite-blocking.c
        (pbb_strip_mine_profitable_p): Replace Value with mpz_t.
        * graphite-clast-to-gimple.c
        (clast_to_gcc_expression): Same.
        (precision_for_value): Same.
        (precision_for_interval): Same.
        (gcc_type_for_interval): Same.
        (graphite_create_new_guard): Same.
        (compute_bounds_for_level): Same.
        (graphite_create_new_loop_guard): Same.
        * graphite-interchange.c
        (build_linearized_memory_access): Same.
        (pdr_stride_in_loop): Same.
        (memory_strides_in_loop_1): Same.
        (memory_strides_in_loop): Same.
        (extend_scattering): Same.
        (psct_scattering_dim_for_loop_depth): Same.
        (pbb_number_of_iterations): Same.
        * graphite-poly.h
        (debug_iteration_domains): Same.
        * graphite-ppl.c
        (new_Cloog_Domain_from_ppl_Pointset_Powerset): Same.
        (ppl_set_inhomogeneous_gmp): Same.
        (ppl_strip_loop): Same.
        (ppl_lexico_compare_linear_expressions): Same.
        (ppl_read_polyhedron_matrix): Same.
        (ppl_max_for_le_pointset): Same.
        * graphite-ppl.h
        (ppl_read_polyhedron_matrix): Same.
        (tree_int_to_gmp): Same.
        (gmp_cst_to_tree): Same.
        (ppl_set_inhomogeneous): Same.
        (ppl_set_inhomogeneous_tree): Same.
        (ppl_set_coef): Same.
        (ppl_set_coef_tree): Same.
        * graphite-sese-to-poly.c
        (build_pbb_scattering_polyhedrons): Same.
        (build_scop_scattering): Same.
        (scan_tree_for_params_right_scev): Same.
        (scan_tree_for_params): Same.
        (find_params_in_bb): Same.
        (find_scop_parameters): Same.
        (add_upper_bounds_from_estimated_nit): Same.
        (build_loop_iteration_domains): Same.
        (add_condition_to_domain): Same.
        (pdr_add_memory_accesses): Same.

2010-05-05  Andreas Simbuerger  <simbuerg@fim.uni-passau.de>

        * graphite-blocking.c (pbb_strip_mine_profitable_p): Resolve
        CLooG's value_* macros to their respective mpz_* counterparts.
        * graphite-clast-to-gimple.c (clast_to_gcc_expression): Same.
        (graphite_create_new_loop_guard): Same.
        * graphite-interchange.c (build_linearized_memory_access): Same.
        (pdr_stride_in_loop): Same.
        (memory_strides_in_loop_1): Same.
        (1st_interchange_profitable_p): Same.
        * graphite-poly.c (extend_scattering): Same.
        (psct_scattering_dim_for_loop_depth): Same.
        (pbb_number_of_iterations): Same.
        (pbb_number_of_iterations_at_time): Same.
        * graphite-poly.h (new_1st_loop): Same.
        * graphite-ppl.c (cloog_matrix_to_ppl_constraint): Same.
        (oppose_constraint): Same.
        (insert_constraint_into_matrix): Same.
        (ppl_set_inhomogeneous_gmp): Same.
        (ppl_set_coef_gmp): Same.
        (ppl_strip_loop): Same.
        (ppl_lexico_compare_linear_expressions): Same.
        (ppl_max_for_le_pointset): Same.
        (ppl_min_for_le_pointset): Same.
        (ppl_build_realtion): Same.
        * graphite-ppl.h (gmp_cst_to_tree): Same.
        (ppl_set_inhomogeneous): Same.
        (ppl_set_inhomogeneous_tree): Same.
        (ppl_set_coef): Same.
        (ppl_set_coef_tree): Same.
        * graphite-sese-to-poly.c (build_pbb_scattering_polyhedrons): Same.
        (build_scop_scattering): Same.
        (add_value_to_dim): Same.
        (scan_tree_for_params_right_scev): Same.
        (scan_tree_for_params_int): Same.
        (scan_tree_for_params): Same.
        (find_params_in_bb): Same.
        (find_scop_parameters): Same.
        (add_upper_bounds_from_estimated_nit): Same.
        (build_loop_iteration_domains): Same.
        (create_linear_expr_from_tree): Same.
        (add_condition_to_domain): Same.
        (pdr_add_memory_accesses): Same.

2010-05-06  Magnus Fromreide  <magfr@lysator.liu.se>
            Jason Merrill  <jason@redhat.com>

        * c-common.c (c_common_reswords): Add nullptr.
        * c-common.h: Add RID_NULLPTR.  Reorganize C++0x rids.
        * dwarf2out.c (is_base_type): Handle NULLPTR_TYPE.
        (gen_type_die_with_usage): Likewise.
        * dbxout.c (dbxout_type): Likewise.
        * sdbout.c (plain_type_1): Likewise.

2010-05-06  Jason Merrill  <jason@redhat.com>

        * gimplify.c (gimplify_expr): Set GS_ALL_DONE when appropriate.
        Don't change GS_OK to GS_ALL_DONE.  Make sure that all cases set
        ret appropriately.
        (gimplify_compound_lval): Return GS_ALL_DONE as appropriate.

        * gimplify.c (gimplify_modify_expr_rhs): Don't return GS_OK for
        stripping WITH_SIZE_EXPR.
        (gimplify_expr) [MODIFY_EXPR]: Trust GS_OK even if the rhs didn't
        change.

2010-05-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc: Removed mips-sgi-irix5*, mips-sgi-irix6.[0-4]* from
        list of obsolete configurations.
        Disabled check for obsolete configurations.
        (mips-sgi-irix[56]*): Restrict to mips-sgi-irix6.5*.
        Removed support for previous versions.
        * config/mips/iris.h: Removed.
        * config/mips/iris5.h: Removed.
        * config/mips/iris6.h: Merged old iris.h contents.
        (TARGET_IRIX): Removed.
        (DRIVER_SELF_SPECS): Removed mabi=32.
        (IDENT_ASM_OP): Removed undef.
        (STARTFILE_SPEC): Removed mabi=32.
        (ENDFILE_SPEC): Likewise.
        (IRIX_SUBTARGET_LINK_SPEC): Likewise.
        (MACHINE_TYPE): Update for IRIX 6.5.
        * config/mips/mips.c (mips_build_builtin_va_list): Replaced
        TARGET_IRIX by TARGET_IRIX6.
        (mips_file_start): Likewise.
        (mips_output_external): Remove IRIX 5/6 O32 support.
        (mips_output_function_prologue): Likewise.
        * config/mips/mips.h (TARGET_GPWORD): Replaced TARGET_IRIX by
        TARGET_IRIX6.
        (TARGET_CPU_CPP_BUILTINS): Likewise.
        (TARGET_IRIX): Removed.
        * config/mips/t-iris6 (MULTILIB_OPTIONS): Removed mabi=32.
        (MULTILIB_DIRNAMES): Removed 32.
        (MULTILIB_OSDIRNAMES): Removed ../lib.
        * doc/install.texi (Prerequisites): Don't reference IRIX before
        6.5.
        (Specific, mips-sgi-irix5): Document removal.
        (Specific, mips-sgi-irix6): Document IRIX 6.[0-4] and O32 ABI
        removal.
        Remove references to older IRIX 6 releases and the O32 ABI.

2010-05-06  Jakub Jelinek  <jakub@redhat.com>

        * gcc.dg/Wunused-var-8.c: Move to...
        * c-c++-common/Wunused-var-6.c: ... here.  New test.

        PR bootstrap/43994
        * df-problems.c (dead_debug_insert_before): Use *DF_REF_REAL_LOC
        instead of DF_REF_REAL_REG.

2010-05-06  Dave Korn  <dave.korn.cygwin@gmail.com>

        PR target/43888
        * config/i386/winnt.c (i386_pe_binds_local_p): Tweak weak symbol
        handling to still return true for x64 targets.

2010-05-06  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * config/m68k/uclinux.h (LIB_SPEC): Bring in sync with config/linux.h.

2010-05-06  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/43791
        * ipa-inline.c (update_caller_keys): Remove bogus
        disregard_inline_limits check.

2010-05-06  Michael Matz  <matz@suse.de>

        PR tree-optimization/43984
        * tree-ssa-pre.c (inserted_phi_names): Remove.
        (inserted_exprs): Change to bitmap.
        (create_expression_by_pieces): Set bits, don't append to vector.
        (insert_into_preds_of_block): Don't handle inserted_phi_names.
        (eliminate): Don't look at inserted_phi_names, remove deleted
        insns from inserted_exprs.
        (remove_dead_inserted_code): Adjust to use bitmaps instead of
        vectors.
        (init_pre, fini_pre): Allocate and free bitmaps.
        (execute_pre): Insert insns on edges before elimination.

2010-05-06  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * tree.c (initializer_zerop): Handle STRING_CST.

2010-05-06  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 40989
        * doc/invoke.texi (Wimplicit): Document as C only.
        * opts.c (common_handle_option): Add argument kind.
        (handle_option): Rename as read_cmdline_option. Factor out code to...
        (handle_option): ... here. New.
        (handle_options): Rename as read_cmdline_options.
        (decode_options): Update call.
        (set_option): Use option index instead of option pointer. Classify
        diagnostics correctly.
        (enable_warning_as_error): Call handle_option.
        * opts.h (set_option): Update declaration.
        (handle_option): Declare.
        * langhooks.h (struct lang_hooks): Add argument kind to
        handle_option.
        * c.opt (Wimplicit,Wimplicit-int): Initialize to -1.
        * c-opts.c (set_Wimplicit): Delete.
        (c_family_lang_mask): New static constant.
        (c_common_handle_option): Add argument kind. Use handle_option
        instead of set_Wimplicit.
        (c_common_post_options): warn_implicit and warn_implicit_int
        are disabled by default.
        * c-common.c (warn_implicit): Do not define here.
        * c-common.h (warn_implicit): Do not declare here.
        (c_common_handle_option): Update declaration.
        * lto-opts.c (lto_reissue_options): Update call to set_option.

2010-05-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43571
        * domwalk.c (walk_dominator_tree): Walk the dominator
        sons in more optimal order.

2010-05-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43934
        * tree-ssa-loop-im.c (movement_possibility): Handle PHI nodes.
        (stmt_cost): Likewise.
        (extract_true_false_args_from_phi): New helper.
        (determine_max_movement): For PHI nodes verify we can hoist them
        and compute their cost.
        (determine_invariantness_stmt): Handle PHI nodes.
        (move_computations_stmt): Likewise.  Hoist PHI nodes in
        if-converted form using COND_EXPRs.
        (move_computations): Return TODO_cleanup_cfg if we hoisted PHI
        nodes.
        (tree_ssa_lim): Likewise.
        * tree-flow.h (tree_ssa_lim): Adjust prototype.
        * tree-ssa-loop.c (tree_ssa_loop_im): Return todo.

2010-05-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43987
        * tree-ssa-structalias.c (could_have_pointers): For possibly
        address-taken variables force pointers to be recorded.
        (create_variable_info_for_1): Likewise.
        (push_fields_onto_fieldstack): Pass in wheter all fields
        must have pointers.
        (find_func_aliases): Query types instead of vars whether
        they contain pointers where appropriate.

2010-05-06  Jan Hubicka  <jh@suse.cz>

        * cgraphbuild.c (record_reference_ctx): Add varpool_node.
        (record_reference, mark_address, mark_load, mark_store): Record
        references.
        (record_references_in_initializer): Update call of record_references.
        (rebuild_cgraph_edges): Remove all references before rebuiding.
        * cgraph.c (cgraph_create_node): Clear ref list.
        (cgraph_remove_node): Remove references.
        (dump_cgraph_node): Dump references.
        (cgraph_clone_node): Clone references.
        * cgraph.h: Include ipa-ref.h and ipa-ref-inline.h
        (struct cgraph_node, varpool_node): Add ref_lst.
        * ipa-ref.c: New file.
        * ipa-ref.h: New file.
        * ipa-ref-inline.h: New file.
        * lto-cgraph.c (output_varpool): Take cgrag node set argument.
        (referenced_from_other_partition_p): New function.
        (lto_output_varpool_node): Take set arugment; call
        referenced_from_other_partition.
        (lto_output_ref): New.
        (add_references): New.
        (output_refs): New.
        (output_cgraph): Compute boundary based on references;
        output refs.
        (output_varpool): Accept cgraph_node_set argument.
        (input_ref): New.
        (input_refs): New.
        (input_cgraph): Call input_refs.
        * lto-section-in.c (lto_section_name): Add refs.
        * Makefile.in: (cgraph.h): Include ipa-ref.h and ipa-ref-inline.h
        (ipa-ref.o): New file.
        * varpool.c (varpool_node): Clear ipa ref list.
        (varpool_remove_node): Remove references.
        (dump_varpool_node): Dump references.
        (varpool_assemble_decl): Only compile finalized ones.
        (varpool_extra_name_alias): Initialize ref list.
        * lto-streamer.c (lto-get_section_name): Add .refs section.
        * lto-streamer.h (lto_section_type): Add LTO_section_refs.
        (referenced_from_other_partition_p): Declared.

2010-05-06  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/43901
        * tree-vect-stmts.c (vectorizable_call): Assert that vector
        type is not NULL if it's transformation phase, and return
        FALSE if it's analysis.
        (vectorizable_conversion, vectorizable_operation, 
        vectorizable_type_demotion, vectorizable_type_promotion):
        Likewise.

2010-05-05  Andrew Pinski  <andrew.pinski@caviumnetworks.com>

        * config/mips/mips.h (TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P):
        Delete.
        * config/mips/mips.c (TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P):
        New define.
        * config/mips/mips-protos.h
        (mips_small_register_classes_for_mode_p): Delete prototype.

2010-05-06  Bernd Schmidt  <bernds@codesourcery.com>

        * config/arm/arm.h (MAX_LDM_STM_OPS): New macro.
        * config/arm/arm.c (multiple_operation_profitable_p,
        compute_offset_order): New static functions.
        (load_multiple_sequence, store_multiple_sequence): Use them.
        Replace constant 4 with MAX_LDM_STM_OPS.  Compute order[0] from
        memory offsets, not register numbers.
        (emit_ldm_seq, emit_stm_seq): Replace constant 4 with MAX_LDM_STM_OPS.

2010-05-05  Steven Bosscher  <steven@gcc.gnu.org>

        * stor-layout.c (pending_sizes): Change the type to
        VEC(tree,gc) *.
        (get_pending_sizes, put_pending_size, put_pending_sizes):
        Update the uses of pending_sizes.
        * c-decl.c (store_parm_decls): Likewise.
        * c-tree.h (struct c_arg_info): Likewise.
        * tree.h: Update the prototype for get_pending_sizes and
        put_pending_sizes.

2010-05-05  Jason Merrill  <jason@redhat.com>

        PR debug/43370
        * c-common.c (handle_aligned_attribute): Respect
        ATTR_FLAG_TYPE_IN_PLACE.

        PR testsuite/43758
        * target.h (struct gcc_target): Add attribute_takes_identifier_p.
        * target_def.h (TARGET_ATTRIBUTE_TAKES_IDENTIFIER_P): Define.
        (TARGET_INITIALIZER): Use it.
        * c-common.c (attribute_takes_identifier_p): Call it.
        * c-common.h: Update prototype.
        * config/rs6000/rs6000.c (rs6000_attribute_takes_identifier_p): New.
        (TARGET_ATTRIBUTE_TAKES_IDENTIFIER_P): Define.

2010-05-05  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43950
        * dwarf2out.c (gen_compile_unit_die): Add DW_AT_identifier_case
        DW_ID_down_case for Fortran compilation units.

2010-05-05  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (lto_output_varpool_node, input_varpool_node): Correctly
        handle aliases.

2010-05-05  Eric Botcazou  <ebotcazou@adacore.com>

        * gimplify.c (gimplify_return_expr): Gimplify the size expressions of
        a variable-sized RESULT_DECL.

2010-05-05  Maxim Kuvyrkov  <maxim@codesourcery.com>

        * doc/invoke.texi (-mfix-cortex-m3-ldrd): Move from ARC section to ARM.

2010-05-05  Jason Merrill  <jason@redhat.com>

        PR c++/43787
        * gimplify.c (gimplify_expr): Keep working if gimplify_modify_expr
        returns GS_OK.
        (gimplify_modify_expr_rhs): Return GS_OK if anything changed.

2010-05-05  Alexandre Oliva  <aoliva@redhat.com>
            Jakub Jelinek  <jakub@redhat.com>

        PR debug/43478
        * df-problems.c (struct dead_debug_use, struct dead_debug): New.
        (dead_debug_init, dead_debug_finish): New functions.
        (dead_debug_add, dead_debug_insert_before): Likewise.
        (df_note_bb_compute): Initialize a dead_debug object, add dead
        debug uses to it, insert debug bind insns before death insns,
        reset debug insns that refer to pending uses at the end.
        * rtl.h (make_debug_expr_from_rtl): New prototype.
        * varasm.c (make_debug_expr_from_rtl): New function.

2010-05-05  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (output_varpool): Forward declare; work on encoder.
        (lto_varpool_encoder_new, lto_varpool_encoder_delete, lto_varpool_encoder_encode
        lto_varpool_encoder_lookup, lto_varpool_encoder_deref, lto_varpool_encoder_size,
        lto_varpool_encoder_encode_initializer_p,
        lto_set_varpool_encoder_encode_initializer): New functions.
        (lto_output_cgraph): Take vset parameter too; compute varpool encoder;
        call output_varpool.
        (input_varpool_node): Do not always set analyzed.
        (input_cgraph_1): Return vector of cgraph nodes.
        (input_varpool_1): Return vector of varpools.
        (input_cgraph): Free the vectors.
        * lto-streamer-out.c (lto_output_ts_decl_common_tree_pointers):
        output only initializers needed.
        (lto_output): Only call output_cgraph.
        (produce_asm_for_decls): Call lto_varpool_encoder_delete.
        * lto-section-out.c (lto_new_out_decl_state): Initialize
        state->varpool_node_encoder.
        * lto-streamer.h (lto_varpool_encoder_d): New.
        (lto_out_decl_state, lto_file_decl_data): Add varpool_node_encoder.     
        (lto_cgraph_encoder_delete, output_cgraph): Update prototype.
        (lto_varpool_encoder_deref, lto_varpool_encoder_lookup,
        lto_varpool_encoder_encode, lto_varpool_encoder_delete,
        lto_varpool_encoder_encode_initializer_p, lto_varpool_encoder_new):
        Declare.
        (output_varpool, input_varpool): Remove declarations.

2010-05-05  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_symtab_resolve_can_prevail_p): Alias of variable
        with body can prevail.

2010-05-05  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_symtab_merge_decls_1): Prefer declarations with
        size.

2010-05-05  Laurynas Biveinis  <laurynas.biveinis@gmail.com>

        * Makefile.in (build/gengtype.o): Add $(HASHTAB_H) to
        dependencies.

        * gengtype.h (erro_at_line): Constify pos argument.

        * gengtype.c: Include hashtab.h.
        (enum gc_used): Document GC_MAYBE_POINTED_TO.
        (error_at_line): Constify pos argument.
        (do_typedef): Initialize p->opt field.
        (get_file_gtfilename): Fix comment typo.
        (struct walk_type_data): Constify line field.
        (get_output_file_for_structure): New function.
        (write_local_func_for_structure): Constify orig_s argument.
        Use get_output_file_for_structure.
        (write_func_for_structure): Use get_output_file_for_structure.
        (INDENT): New define.
        (dump_pair, dump_type, dump_type_list, dump_typekind)
        (dump_gc_used, dump_options, dump_fileloc, dump_type_u_s)
        (dump_type_u_a, dump_type_u_param_struct, dump_everything): New
        functions.
        (seen_types): New variable.
        (main): New variable do_dump.  Process "-d" command line option.
        Call dump_everything if dump requested.

2010-05-05  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (var_debug_decl): Save DECL_DEBUG_EXPR value
        in a temporary instead of invoking the macro multiple times.
        (track_expr_p): Likewise.

2010-05-04  Neil Vachharajani <nvachhar@google.com>

        * doc/invoke.texi (-Wcoverage-mismatch): Updated documentation as
        per new semantics.
        * opts.c (decode_options): Enable -Werror=coverage-mismatch.
        * coverage.c (get_coverage_counts): Always emit a warning.  Adjust
        conditions for printing notes.
        * common.opt (-Wcoverage-mismatch): Allow negative, default to
        true, update documentation.
        * Makefile.in (coverage.o): Add dependence on DIAGNOSTIC_H and intl.h.

2010-05-04  Jakub Jelinek  <jakub@redhat.com>

        PR c/43981
        * c-parser.c (c_parser_direct_declarator_inner): Call mark_exp_read
        on dimen.

2010-05-04  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/43799
        * config/i386/i386.md (sse_prologue_save): Add clobber CC
        register.
        (*sse_prologue_save_insn1): Likewise.
        (SSE prologue save splitter): Likewise.

2010-05-04  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.c (free_lang_data_in_one_sizepos): New inline function.
        (free_lang_data_in_type): Call it on TYPE_{MIN|MAX}_VALUE of numerical
        types.  Call it on TYPE_SIZE and TYPE_SIZE_UNIT of all types.
        (free_lang_data_in_decl): Call it on DECL_SIZE and DECL_SIZE_UNIT of
        all decls.  Call it on DECL_FIELD_OFFSET of fields.
        (find_decls_types_r): Follow DECL_VALUE_EXPR.
        (iterative_hash_expr) <PLACEHOLDER_EXPR>: New case.

2010-05-04  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (build_access_from_expr_1): The first parameter type
        changed to simple tree.
        (build_access_from_expr): Likewise, gsi parameter was eliminated.
        (scan_assign_result): Renamed to assignment_mod_result, enum elements
        renamed as well.
        (build_accesses_from_assign): Removed all parameters except for a
        simple gimple statement.  Now returns a simple bool.
        (scan_function): All non-analysis parts moved to separate functions
        sra_modify_function_body and ipa_sra_modify_function_body.  Removed all
        parameters and updated both callers.
        (sra_modify_expr): Removed parameter data.
        (sra_modify_function_body): New function.
        (perform_intra_sra): Call sra_modify_function_body to modify the
        function body.
        (replace_removed_params_ssa_names): Parameter data changed into
        adjustments vector.
        (sra_ipa_modify_expr): Likewise.  Also removed unused parameter gsi and
        changed the parameter dont_convert to convert with the opposite
        meaning.
        (sra_ipa_modify_assign): Parameter data changed into adjustments
        vector, return value changed to bool.
        (ipa_sra_modify_function_body): New function.
        (sra_ipa_reset_debug_stmts): Updated a comment.
        (modify_function): Use ipa_sra_modify_function_body to modify function
        body.

2010-05-04  H.J. Lu  <hongjiu.lu@intel.com>

        PR middle-end/43671
        * alias.c (true_dependence): Handle the same VALUE in x and mem.
        (canon_true_dependence): Likewise.
        (write_dependence_p): Likewise.

2010-05-04  Jan Hubicka  <jh@suse.cz>

        * Makefile.in (cgraphbuild.o): Add dependency on ipa-utils.h
        * cgraphbuild.c: Include ipa-utils.h
        (record_reference_ctx): New struct.
        (record_reference): Simplify to work on initializers; not statements.
        (mark_address, mark_load, mark_store): New.
        (build_cgraph_edges): Simplify using walk_stmt_load_store_addr_ops;
        walk PHI nodes too.
        (record_references_in_initializer): Update use of record_reference.
        (rebuild_cgraph_edges): Simplify using walk_stmt_load_store_addr_ops;
        walk PHI nodes too.

2010-05-04  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_cgraph_replace_node): Do not remove edges;
        node will be removed anyway.
        (lto_varpool_replace_node): Allow also unanalyzed nodes;
        relink aliases of node into prevailing node.
        * varpool.c (varpool_remove_node): Remove aliases properly;
        when removing node, remove all its aliases too; remove DECL_INITIAL
        of removed node; ggc_free the varpool node.

2010-05-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43879
        * tree-ssa-structalias.c (alias_get_name): Use
        DECL_ASSEMBLER_NAME if available.
        (create_function_info_for): Return the varinfo node.
        (ipa_pta_execute): Associate same-body aliases and extra names
        with their origin nodes varinfo.  Dump DECL_ASSEMBLER_NAME.

2010-05-04  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh.c (sh_small_register_classes_for_mode_p): Remove
        static.

2010-05-04  Mikael Pettersson  <mikpe@it.uu.se>

        PR bootstrap/43964
        * ira-color.c (assign_hard_reg): Declare rclass and add_cost
        only if HONOR_REG_ALLOC_ORDER is not defined.

2010-05-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43949
        * tree-vrp.c (extract_range_from_binary_expr): Only handle
        TRUNC_MOD_EXPR.

2010-04-26  Jason Merrill  <jason@redhat.com>

        * c.opt (-fstrict-enums): New.
        * doc/invoke.texi (C++ Dialect Options): Document -fstrict-enums.

2010-05-03  David Ung <davidu@mips.com>
            James E. Wilson  <wilson@codesourcery.com>

        * config/mips/mips.c (mips_output_division): If GENERATE_DIVIDE_TRAPS,
        emit the trap instruction before the divide for TUNE_74K.

2010-05-03  Steven Bosscher  <steven@gcc.gnu.org>

        * doc/tm.texi (defmac SMALL_REGISTER_CLASSES): Remove.
        (TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P): Add documentation,
        based on the above, for new target hook.

        * hooks.c (hook_bool_mode_true): New generic hook.
        * hooks.h (hook_bool_mode_true): Add prototype.

        * target.h (struct gcc_target): Add small_register_classes_for_mode_p
        target hook.
        * target-def.h (TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P): New default
        target hook, set to hook_bool_mode_false.
        * regs.h: Remove default definition of SMALL_REGISTER_CLASSES.
        * reload.c (push_secondary_reload): Replace SMALL_REGISTER_CLASSES
        with targetm.small_register_classes_for_mode_p.
        (find_reusable_reload): Likewise.
        (combine_reloads): Likewise.
        * reload1.c (reload_as_needed): Likewise.
        * cse.c (approx_reg_cost_1, hash_rtx_cb): Likewise.
        * ifcvt.c (noce_process_if_block, check_cond_move_block,
        dead_or_predicable): Likewise.
        * regmove.c (optimize_reg_copy_1): Likewise.
        * calls.c (prepare_call_address): Likewise.
        (precompute_register_parameters): Likewise.

        * config/sh/sh.h: Replace SMALL_REGISTER_CLASSES with new target
        hook definition.
        * config/sh/sh.c (sh_small_register_classes_for_mode_p): Add
        implementation of the hook that considers all register classes
        small except for SH64.
        (sh_override_options): Use the new hook.
        * config/sh/sh-protos.h (sh_small_register_classes_for_mode_p):
        Add prototype.

        * config/arm/arm.h: Replace SMALL_REGISTER_CLASSES with new target
        hook definition.
        * config/arm/arm.c (arm_small_register_classes_for_mode_p): Add
        implementation of the hook that considers all register classes
        small for THUMB1.
        * config/arm/arm-protos.h (arm_small_register_classes_for_mode_p):
        Add prototype.

        * config/mips/mips.h: Replace SMALL_REGISTER_CLASSES with new target
        hook definition.
        * config/mips/mips.c (mips_small_register_classes_for_mode_p): Add
        implementation of the hook that considers all register classes
        small for MIPS16.
        * config/mips/mips-protos.h (mips_small_register_classes_for_mode_p):
        Add prototype.

        * config/i386/i386.h: Replace SMALL_REGISTER_CLASSES with new target
        hook definition.
        * config/m32c/m32c.h: Likewise.
        * config/pdp11/pdp11.h: Likewise.
        * config/avr/avr.h: Likewise.
        * config/xtensa/xtensa.h: Likewise.
        * config/m68hc11/m68hc11.h: Likewise.
        * config/mn10300/mn10300.h: Likewise.
        * config/mcore/mcore.h: Likewise.
        * config/h8300/h8300.h: Likewise.
        * config/bfin/bfin.h: Likewise.

        * config/iq2000/iq2000.h: Remove SMALL_REGISTER_CLASSES definition.
        * config/rx/rx.h: Remove SMALL_REGISTER_CLASSES definition.

2010-05-03  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (tree_to_double_int): Remove macro.
        (double_int_to_tree, double_int_fits_to_tree_p): Move prototypes ...
        * tree.h (double_int_to_tree, double_int_fits_to_tree_p): ... here.
        (tree_to_double_int): New function.
        * double-int.c (double_int_to_tree, double_int_fits_to_tree_p):
        Move ...
        * tree.c (double_int_to_tree, double_int_fits_to_tree_p): ... here.

2010-05-03  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43971
        * tree-ssa-structalias.c (get_constraint_for_1): Fix
        constraints in the !flag_delete_null_pointer_checks case.

2010-05-03  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43972
        * config/i386/i386.c (ix86_delegitimize_address): Make sure the
        result mode matches original rtl mode.

2010-05-03  Dave Korn  <dave.korn.cygwin@gmail.com>

        PR target/43888
        * config/i386/winnt.c (i386_pe_binds_local_p): Handle weak decls.

2010-05-02  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_target_string): Output 'flags', not 'isa',
        when processing flag options.

2010-05-02  Uros Bizjak  <ubizjak@gmail.com>

        * gcov-iov.c (main): Change format string placeholder
        from %#08x to 0x%08x.
        * genchecksum.c (dosum): Change format string placeholder
        from %#02x to 0x%02x.

2010-05-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43879
        * tree-tailcall.c (find_tail_calls): Clobbers also prevent tail calls.

2010-05-02  Bruno Haible  <bruno@clisp.org>

        * doc/extend.texi (Function Attributes): Fix a typo.

2010-05-02  Uros Bizjak  <ubizjak@gmail.com>

        Revert:
        * hwint.h (HOST_WIDE_INT_PRINT_DOUBLE_HEX): Change format string
        placeholder from 0x%x to %#x.
        (HOST_WIDEST_INT_PRINT_DOUBLE_HEX): Ditto.
        * config/i386/i386elf.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/i386-interix.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/att.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/sysv4.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/i386.c (ix86_target_string): Ditto.
        * config/i386/i386.c (output_pic_addr_const): Ditto.
        (print_operand): Ditto.

2010-05-02  Uros Bizjak  <ubizjak@gmail.com>

        * vmsdbgout.c (ASM_OUTPUT_DEBUG_DATA1): Change format string
        placeholder from 0x%x to %#x.
        (ASM_OUTPUT_DEBUG_DATA1): Ditto.
        (ASM_OUTPUT_DEBUG_DATA4): Ditto.
        (ASM_OUTPUT_DEBUG_DATA): Ditto.
        (ASM_OUTPUT_DEBUG_ADDR_DATA): Ditto.
        (ASM_OUTPUT_DEBUG_DATA8): Ditto.
        * optc-gen.awk: Ditto.
        * hwint.h (HOST_WIDE_INT_PRINT_DOUBLE_HEX): Ditto.
        (HOST_WIDE_INT_PRINT_HEX): Ditto.
        (HOST_WIDEST_INT_PRINT_HEX): Ditto.
        (HOST_WIDEST_INT_PRINT_DOUBLE_HEX): Ditto.

2010-05-01  Anatoly Sokolov  <aesok@post.ru>

        * target.h (struct calls): Add function_value_regno_p field.
        * target-def.h (TARGET_FUNCTION_VALUE_REGNO_P): Define.
        (TARGET_INITIALIZER): Use TARGET_FUNCTION_VALUE_REGNO_P.
        * targhooks.c (default_function_value_regno_p): New function.
        * targhooks.h (default_function_value_regno_p): Declare function.
        * rtlanal.c (keep_with_call_p): Use function_value_regno_p hook.
        * builtins.c. (apply_result_size): (Ditto.).
        * combine.c. (likely_spilled_retval_p): (Ditto.).
        * mode-switching.c. Include 'target.h'.
        (create_pre_exit): Use function_value_regno_p hook.
        * Makefile.in (mode-switching.o): Add dependency on TARGET_H.
        * doc/tm.texi (FUNCTION_VALUE_REGNO_P,
        TARGET_FUNCTION_VALUE_REGNO_P): Revise documentation.

        * config/i386/i386.h (TARGET_FUNCTION_VALUE_REGNO_P): Remove macro.
        * config/i386/i386.c (TARGET_FUNCTION_VALUE_REGNO_P): Define macro.
        (ix86_function_value_regno_p): Declare as static, change argument
        type to const unsigned int.
        * config/i386/i386-protos.h (ix86_function_value_regno_p): Remove.

2010-05-01  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43949
        * tree-vrp.c (ssa_name_nonnegative_p): Return true for unsigned
        types.
        (extract_range_from_binary_expr): Handle *_MOD_EXPR.

2010-05-01  Anatoly Sokolov  <aesok@post.ru>

        * rtl.h (CONST_DOUBLE_P): Define.
        (rtx_to_double_int): Declare.
        * emit-rtl.c (rtx_to_double_int): New function.
        * dwarf2out.c (insert_double): New function.
        (loc_descriptor, add_const_value_attribute): Clean up, use
        rtx_to_double_int and insert_double functions.

2010-05-01  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/extend.texi (Inline): Add missing return keyword to examples.
        (Function Attributes, Variable Attributes, Pragmas): Hyphenate
        "command-line".

2010-04-30  Eric Botcazou  <ebotcazou@adacore.com>

        * tree-ssa-loop-ivopts.c (may_be_unaligned_p): Check the alignment of
        the variable part of the offset as well.  Use highest_pow2_factor for
        all alignment checks.

2010-04-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43879
        * tree-ssa-structalias.c (type_could_have_pointers): Functions
        can have pointers.

2010-04-30  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_symtab_resolve_can_prevail_p): Chose var with
        varpool.
        (lto_symtab_merge_decls_1): Remove logic looking for an initializer.

2010-04-30  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (cgraph_node_set_nonempty_p, varpool_node_set_nonempty_p):
        New.
        * lto-cgraph.c (input_cgraph): Remove call to lto_mark_file_for_ltrans.
        * lto-streamer.h (lto_file_decl_data): Remove needs_ltrans_p.
        (lto_file_needs_ltrans_p, lto_mark_file_for_ltrans,
        cgraph_node_set_needs_ltrans_p): Remove.

2010-04-30  Steven Bosscher  <steven@gcc.gnu.org>

        * sdbout.c: Include vec.h, do not include varray.h.
        (deferred_global_decls, sdbout_global_decl,
        sdbout_finish, sdbout_init): Use VEC instead of VARRAY.
        * toplev.c: Do not include varray.h.
        (dump_memory_report): Do not dump VARRAY statistics.
        * gengtype.c (open_base_file): Ignore varray.h.
        * Makefile.in: Update for abovementioned changes.
        Remove all traces of varray.c and varray.h.
        * varray.c: Remove file.
        * varray.h: Remove file.

2010-04-30  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (lto_output_varpool_node): Always output constant pool
        references.

2010-04-30  Jan Hubicka  <jh@suse.cz>

        * tree-profile.c (tree_init_ic_make_global_vars): Mark new decls as
        needed.

2010-04-30  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (get_constraint_for_1): Generate
        constraints for CONSTRUCTOR.

2010-04-30  Richard Guenther  <rguenther@suse.de>

        PR lto/43946
        * passes.c (init_optimization_passes): Move pass_ipa_free_lang_data
        first after all lowering passes.

2010-04-30  Steven Bosscher  <steven@gcc.gnu.org>

        * toplev.c: Include varray.h for statistics dumping.
        * tree.h: Do not declare varray_head_tag.
        * tree-into-ssa.c, tree-ssa-uninit.c, tree-phinodes.c, omega.c,
        regs.h, lto-cgraph.c, tree-ssa-loop-ivopts.c, tree-nomudflap.c,
        c-objc-common.c, lto-streamer-out.c, tree-ssa-propagate.c,
        gimple-low.c, c-semantics.c, dwarf2out.c, lto-streamer-in.c,
        lto-section-in.c, alias.c, tree-if-conv.c, gimplify.c, ggc-zone.c,
        tree-ssa.c, tree-ssa-loop-prefetch.c, integrate.h, c-gimplify.c,
        c-common.c, c-common.h, reg-stack.c, basic-block.h,
        tree-ssa-structalias.c, lto-section-out.c, tree-ssanames.c: Do not
        include varray.h.
        * Makefile.in: Update for abovementioned changes.

2010-04-30  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43942
        * tree.c (auto_var_in_fn_p): Return false for DECL_EXTERNAL vars.

2010-04-30  Hariharan Sandanagobalane  <hariharan@picochip.com>

        * config/picochip/picochip.c (picochip_legitimize_address): Define.
        Use this function to do machine-specific conversion.
        (picochip_legitimize_reload_address): Likewise.
        (picochip_legitimate_address_p): Check valid base register only if
        strict.
        (picochip_check_conditional_copy): Check for modw only if opnd is
        register.
        * config/picochip/picochip.h (LEGITIMIZE_RELOAD_ADDRESS): Use this
        to call the function in c.
        * config/picochip/picochip-protos.h
        (picochip_legitimize_reload_address): Define.
        * config/picochip/picochip.md (supported_compare1): Define.

2010-04-30  Jan Hubicka  <jh@suse.cz>

        * cgraph.h (cgraph_local_info): Remove for_functions_valid.
        (cgraph_global_info): Remove inlined.
        (LTO_cgraph_tag_names): Remove.
        (LTO_cgraph_tags, LCC_NOT_FOUND): Move to ...
        * lto-cgraph.c (LTO_cgraph_tags, LCC_NOT_FOUND): ... here;
        simplify cgraph tags and document.
        (lto_output_node): Use only LTO_cgraph_unavail_node and
        LTO_cgraph_analyzed_node; Do not save analzed, reachable,
        for_functions_valid, global info, process and output flags.
        (input_overwrite_node): Initialize estimated stack size and
        estimated growth.  Do not read flags we no longer store.
        (input_node): Likewise do not read info no longer stored.
        * ipa-inline.c (cgraph_mark_inline_edge): Do not set global.inlined
        flag.

2010-04-30  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43879
        * tree-ssa-structalias.c (get_constraint_for_1): Properly
        handle non-zero initializers.

2010-04-30  Richard Guenther  <rguenther@suse.de>

        * builtins.c (fold_builtin_1): Delete free (0).

2010-04-29  Jan Hubicka  <jh@suse.cz>

        * gengtype.c (open_base_files): Add lto-streamer.h
        * cgraph.h (cgraph_local_info): lto_file_data is now in GGC.
        (pass_ipa_cp): GGC collect.
        * toplev. (compile_file): Do not output symbols.
        * ipa-inline.c (pass_ipa_inline): Add ggc collect.
        * timevar.def (TV_VARPOOL, TV_IPA_LTO_DECL_INIT_IO,
        TV_IPA_LTO_DECL_MERGE, TV_IPA_LTO_CGRAPH_MERGE, TV_VAROUT): New.
        * lto-section-in.c: Include ggc.h
        (lto_new_in_decl_state): Alloc in GGC.
        (lto_delete_in_decl_state): Likewise.
        * ipa.c (pass_ipa_function_visibility, pass_ipa_whole_program):
        Collect.

2010-04-29  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/42895
        * doc/tm.texi (ADJUST_REG_ALLOC_ORDER): Renamed from
        ORDER_REGS_FOR_LOCAL_ALLOC.  All instances of this macro changed.
        (HONOR_REG_ALLOC_ORDER): Describe new macro.
        * ira.c (setup_alloc_regs): Use ADJUST_REG_ALLOC_ORDER if defined.
        * ira-color.c (assign_hard_reg): Take prologue/epilogue costs into
        account only if HONOR_REG_ALLOC_ORDER is not defined.
        * config/arm/arm.h (HONOR_REG_ALLOC_ORDER): Define.
        * system.h (ORDER_REGS_FOR_LOCAL_ALLOC): Poison.

2010-04-29  Jon Grant  <04@jguk.org>

        * collect2.c (vflag): Change type from int to bool.
        (debug): Likewise.
        (helpflag): New global bool.
        (main): Set vflag and debug with boolean, not integer truth values.
        Accept new "--help" option and output usage text if found.
        * collect2.h (vflag): Update prototype.
        (debug): Likewise.

2010-04-29  H.J. Lu  <hongjiu.lu@intel.com>

        PR bootstrap/43936
        * plugin.h (flag_plugin_added): Moved out of invoke_plugin_callbacks.

2010-04-29  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/43935
        * plugin.h (invoke_plugin_callbacks): Annotate arguments
        with ATTRIBUTE_UNUSED.

2010-04-29  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/43921
        * config/i386/i386.c (get_some_local_dynamic_name): Replace
        INSN_P with NONDEBUG_INSN_P.
        (distance_non_agu_define): Likewise.
        (distance_agu_use): Likewise.

2010-04-29  Bernd Schmidt  <bernds@codesourcery.com>

        From Dominique d'Humieres <dominiq@lps.ens.fr>
        PR bootstrap/43858
        * ifcvt.c (dead_or_predicable): Use df_simulate_find_defs to compute
        test_set.

2010-04-29  Brian Hackett  <bhackett1024@gmail.com>

        * plugin.h (invoke_plugin_callbacks): New inline function.
        * plugin.c (flag_plugin_added): New global flag.
        (add_new_plugin): Initialize above flag.
        (invoke_plugin_callbacks): Rename to ...
        (invoke_plugin_callbacks_full): ... this.

2010-04-28  Jan Hubicka  <jh@suse.cz>

        * lto-symtab.c (lto_symtab_entry_def) Add vnode.
        (lto_varpool_replace_node): New.
        (lto_symtab_resolve_symbols): Resolve varpool nodes.
        (lto_symtab_merge_decls_1): Prefer decls with varpool node.
        (lto_symtab_merge_cgraph_nodes_1): Merge varpools.
        * cgraph.h (varpool_node_ptr): New type.
        (varpool_node_ptr): New vector.
        (varpool_node_set_def): New structure.
        (varpool_node_set): New type.
        (varpool_node_set): New vector.
        (varpool_node_set_element_def): New structure.
        (varpool_node_set_element, const_varpool_node_set_element): New types.
        (varpool_node_set_iterator): New type.
        (varpool_node): Add prev pointers, add used_from_other_partition,
        in_other_partition.
        (varpool_node_set_new, varpool_node_set_find, varpool_node_set_add,
        varpool_node_set_remove, dump_varpool_node_set, debug_varpool_node_set,
        varpool_get_node, varpool_remove_node): Declare.
        (vsi_end_p, vsi_next, vsi_node, vsi_start, varpool_node_in_set_p,
        varpool_node_set_size): New inlines.
        * cgraph.c (dump_cgraph_node): Dump asm names of aliases.
        * tree-pass.h (varpool_node_set_def): Forward declare.
        (ipa_opt_pass_d): Summary writting takes vnode sets too.
        (ipa_write_optimization_summaries): Update prototype.
        * ipa-cp.c (ipcp_write_summary): Update.
        * ipa-reference.c (ipa_reference_write_summary): Update.
        * lto-cgraph.c (lto_output_varpool_node): New static function.
        (output_varpool): New function.
        (input_varpool_node): New static function.
        (input_varpool_1): New function.
        (input_cgraph): Input varpool.
        * ipa-pure-const.c (pure_const_write_summary): Update.
        * lto-streamer-out.c (lto_output): Update, output varpool too.
        (write_global_stream): Kill WPA hack.
        (produce_asm_for_decls): Update.
        (output_alias_pair_p): Handle variables.
        (output_unreferenced_globals): Output only needed partition of varpool.
        * ipa-inline.c (inline_write_summary): Update.
        * lto-streamer-in.c (lto_input_tree_ref, lto_input_tree): Do not build
        cgraph.
        * lto-section-in.c (lto_section_name): Add varpool and jump funcs.
        * ipa.c (hash_varpool_node_set_element, eq_varpool_node_set_element,
        varpool_node_set_new, varpool_node_set_add,
        varpool_node_set_remove, varpool_node_set_find, dump_varpool_node_set,
        debug_varpool_node_set): New functions.
        * passes.c (rest_of_decl_compilation): when in LTO do not finalize.
        (execute_one_pass): Process new decls too.
        (ipa_write_summaries_2): Pass around vsets.
        (ipa_write_summaries_1): Likewise.
        (ipa_write_summaries): Build vset; be more selective about cgraph nodes
        to add.
        (ipa_write_optimization_summaries_1): Pass around vsets.
        (ipa_write_optimization_summaries): Likewise.
        * varpool.c (varpool_get_node): New.
        (varpool_node): Update doubly linked lists.
        (varpool_remove_node): New.
        (dump_varpool_node): More dumping.
        (varpool_enqueue_needed_node): Update doubly linked lists.
        (decide_is_variable_needed): Kill ltrans hack.
        (varpool_finalize_decl): Kill lto hack.
        (varpool_assemble_decl): Skip decls in other partitions.
        (varpool_assemble_pending_decls): Update doubly linkes lists.
        (varpool_empty_needed_queue): Likewise.
        (varpool_extra_name_alias): Likewise.
        * lto-streamer.c (lto_get_section_name): Add vars section.
        * lto-streamer.h (lto_section_type): Update.
        (output_varpool, input_varpool): Declare.

2010-04-28  Mike Stump  <mikestump@comcast.net>

        * config/i386/darwin.h (CC1_SPEC): Ignore -mdynamic-no-pic for now.

2010-04-28  Eric Botcazou  <ebotcazou@adacore.com>

        * lto-streamer-in.c (unpack_ts_type_value_fields): Replace test for
        record or union type with RECORD_OR_UNION_TYPE_P predicate.
        (lto_input_ts_type_tree_pointers): Likewise.
        * lto-streamer-out.c (pack_ts_type_value_fields): Likewise.
        (lto_output_ts_type_tree_pointers): Likewise.

2010-04-28  Eric Botcazou  <ebotcazou@adacore.com>

        Uniquization of constants at the Tree level
        * tree.h (DECL_IN_CONSTANT_POOL): New macro.
        (tree_decl_with_vis): Add in_constant_pool bit, move shadowed_for_var_p
        bit to the end.
        (tree_output_constant_def): Declare.
        * gimplify.c (gimplify_init_constructor): When using block copy, first
        uniquize the constant constructor on the RHS.
        * lto-streamer-in.c (unpack_ts_decl_with_vis_value_fields): Deal with
        DECL_IN_CONSTANT_POOL flag.
        * lto-streamer-out.c (pack_ts_decl_with_vis_value_fields): Likewise.
        * varasm.c (make_decl_rtl): Deal with variables belonging to the global
        constant pool.
        (assemble_variable): Deal with symbols belonging to the tree constant
        pool.
        (get_constant_section): Add ALIGN parameter and simplify.
        (build_constant_desc): Build a VAR_DECL and attach it to the symbol.
        (assemble_constant_contents): Use the expression of the VAR_DECL.
        (output_constant_def_contents): Use the alignment of the VAR_DECL.
        (tree_output_constant_def): New global function.
        (mark_constant): Use the expression of the VAR_DECL.
        (place_block_symbol): Use the alignment of the VAR_DECL and the size of
        its expression.
        (output_object_block): Likewise and assemble the expression.

2010-04-28  Eric Botcazou  <ebotcazou@adacore.com>

        * lto-streamer.c [LTO_STREAMER_DEBUG] (tree_htab, tree_hash_entry,
        hash_tree, eq_tree): New tree hash table.
        (lto_streamer_init) [LTO_STREAMER_DEBUG]: Initialize it.
        [LTO_STREAMER_DEBUG] (lto_orig_address_map, lto_orig_address_get,
        lto_orig_address_remove): Reimplement.

2010-04-28  Xinliang David Li  <davidxl@google.com>

        PR c/42643
        * tree-ssa-uninit.c (can_skip_redundant_opnd): New function.
        (compute_uninit_opnds_pos): New function.
        (is_non_loop_exit_postdominating): New function.
        (compute_control_dep_chain): New function.
        (find_pdom): New function.
        (convert_control_dep_chain_into_preds): New function.
        (find_predicates): New function.
        (find_control_equiv_block): New function.
        (collect_phi_def_edges): New function.
        (find_def_preds): New function.
        (find_dom): New function.
        (dump_predicates): New function.
        (get_cmp_code): New function.
        (is_value_included_in): New function.
        (find_matching_predicate_in_rest_chains): New function.
        (use_pred_not_overlap_with_undef_path_pred): New function.
        (is_use_properly_guarded): New function.
        (normalize_cond_1): New function.
        (is_and_or_or): New function.
        (normalize_cond): New function.
        (is_gcond_subset_of): New function.
        (is_subset_of_any): New function.
        (is_or_set_subset_of): New function.
        (is_and_set_subset_of): New function.
        (is_norm_cond_subset_of): New function.
        (is_pred_expr_subset_of): New function.
        (is_pred_chain_subset_of): New function.
        (is_included_in): New function.
        (is_superset_of): New function.
        (find_uninit_use): New function.
        (warn_uninitialized_phi): New function.
        (compute_possibly_undefined_names): New function.
        (ssa_undefined_value_p): New function.
        (execute_late_warn_uninitialized): New function.
        * tree-ssa.c (ssa_undefined_value_p): Removed.
        (warn_uninit): Changed to extern.
        (warn_uninitialized_phi): Removed.
        (warn_uninitialized_vars): Changed to extern.
        (execute_late_warn_uninitialized): Removed
        * tree-flow.h: Add new prototypes.
        * timevar.def: Add new time variable.
        * Makefile.in: Add new build file.

2010-04-28  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/elf.h (ASM_DECLARE_OBJECT_NAME): Use gnu_unique_object
        type if available.

2010-04-28  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/22224
        * config/alpha/osf5.h (ASM_OUTPUT_LOCAL): Redefine.

2010-04-28  Martin Jambor  <mjambor@suse.cz>

        * cgraph.h (struct cgraph_node): New field indirect_calls.
        (struct cgraph_indirect_call_info): New type.
        (struct cgraph_edge): Removed field indirect_call. New fields
        indirect_info, indirect_inlining_edge and indirect_unknown_callee.
        (cgraph_create_indirect_edge): Declare.
        (cgraph_make_edge_direct): Likewise.
        (enum LTO_cgraph_tags): New item LTO_cgraph_indirect_edge.
        * ipa-prop.h (struct ipa_param_call_note): Removed.
        (struct ipa_node_params): Removed field param_calls.
        (ipa_create_all_structures_for_iinln): Declare.
        * cgraph.c: Described indirect edges and uids in initial comment.
        (cgraph_add_edge_to_call_site_hash): New function.
        (cgraph_edge): Search also among the indirect edges, use
        cgraph_add_edge_to_call_site_hash to add edges to the call site hash.
        (cgraph_set_call_stmt): Possibly turn an indirect edge into a direct
        one, use cgraph_add_edge_to_call_site_hash to add edges to the call
        site hash.
        (initialize_inline_failed): Assign a reason to indirect edges.
        (cgraph_create_edge_1): New function.
        (cgraph_create_edge): Moved some functionality to
        cgraph_create_edge_1.
        (cgraph_create_indirect_edge): New function.
        (cgraph_edge_remove_callee): Add an assert checking for
        non-indirectness.
        (cgraph_edge_remove_caller): Special-case indirect edges.
        (cgraph_remove_edge): Likewise.
        (cgraph_set_edge_callee): New function.
        (cgraph_redirect_edge_callee): Use cgraph_set_edge_callee.
        (cgraph_make_edge_direct): New function.
        (cgraph_update_edges_for_call_stmt_node): Do nothing only when also
        the declaration of the call statement matches.
        (cgraph_node_remove_callees): Special-case indirect edges.
        (cgraph_clone_edge): Likewise.
        (cgraph_clone_node): Clone also the indirect edges.
        (dump_cgraph_node): Dump indirect_inlining_edge flag instead of
        indirect_call, dump count of indirect_calls edges.
        * ipa-prop.c (iinlining_processed_edges): New variable.
        (ipa_note_param_call): Create indirect edges instead of
        creating notes.  New parameter node.
        (ipa_analyze_call_uses): New parameter node, pass it on to
        ipa_note_param_call.
        (ipa_analyze_stmt_uses): Likewise.
        (ipa_analyze_params_uses): Pass node to ipa_analyze_stmt_uses.
        (print_edge_addition_message): Work on edges rather than on notes.
        (update_call_notes_after_inlining): Likewise, renamed to
        update_indirect_edges_after_inlining.
        (ipa_create_all_structures_for_iinln): New function.
        (ipa_free_node_params_substructures): Do not free notes.
        (ipa_edge_duplication_hook): Propagate bits within
        iinlining_processed_edges bitmap.
        (ipa_node_duplication_hook): Do not duplicate notes.
        (free_all_ipa_structures_after_ipa_cp): Renamed to
        ipa_free_all_structures_after_ipa_cp.
        (free_all_ipa_structures_after_iinln): Renamed to
        ipa_free_all_structures_after_iinln.g
        (ipa_write_param_call_note): Removed.
        (ipa_read_param_call_note): Removed.
        (ipa_write_indirect_edge_info): New function.
        (ipa_read_indirect_edge_info): Likewise.
        (ipa_write_node_info): Do not stream notes, do stream information
        in indirect edges.
        (ipa_read_node_info): Likewise.
        (lto_ipa_fixup_call_notes): Removed.
        * ipa-cp.c (pass_ipa_cp): Set stmt_fixup to NULL.
        * ipa-inline.c (pass_ipa_inline): Likewise.
        * cgraphunit.c (verify_cgraph_node): Check also indirect edges.
        * cif-code.def (INDIRECT_UNKNOWN_CALL): New reason.
        * tree-inline.c (copy_bb): Removed an unnecessary double check for
        is_gimple_call.
        * tree-inline.c (get_indirect_callee_fndecl): Do not consider indirect
        edges.
        * lto-cgraph.c (output_outgoing_cgraph_edges): New function.
        (output_cgraph): Stream also indirect edges.
        (lto_output_edge): Added capability to stream indirect edges.
        (input_edge): Likewise.
        (input_cgraph_1): Likewise.
        * lto-streamer-in.c (fixup_call_stmt_edges_1): Fixup also statements
        of indirect edges.

2010-04-28  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43879
        PR tree-optimization/43909
        * tree-ssa-structalias.c (struct variable_info): Add
        only_restrict_pointers flag.
        (new_var_info): Initialize it.  Increment stats.total_vars here.
        (create_function_info_for): Do not increment stats.total_vars
        here.
        (get_function_part_constraint): Fix build with C++.
        (insert_into_field_list): Remove.
        (push_fields_onto_fieldstack): Properly merge fields.
        (create_variable_info_for): Split and simplify.
        (create_variable_info_for_1): New piece.
        (intra_create_variable_infos): Properly make restrict constraints
        from parameters.

2010-04-28  Richard Guenther  <rguenther@suse.de>

        PR c++/43880
        * tree-inline.c (copy_bind_expr): Also copy bind expr vars value-exprs.

2010-04-27  Manuel López-Ibáñez  <manu@gcc.gnu.org>
            Jan Hubicka <hubicka@ucw.cz>

        * doc/invoke.texi (-Wsuggest-attribute=const,
        -Wsuggest-attribute=pure): Document.
        * ipa-pure-const.c: Include toplev.h, intl.h and opts.h.
        (function_always_visible_to_compiler_p,
        suggest_attribute, warn_function_pure, warn_function_const):
        New functions.
        (check_call): Improve debug info.
        (analyze_function): Do not check availability.
        (add_new_function): Check availability.
        (propagate): Output warnings.
        (skip_function_for_local_pure_const): New function.
        (local_pure_const): Use it; output warnings.
        * common.opt (Wsuggest-attribute=const,
        Wsuggest-attribute=pure): New.

2010-04-27  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (def_cfa_1): After DW_CFA_def_cfa_expression
        force using DW_CFA_def_cfa instead of DW_CFA_def_cfa_register
        or DW_CFA_def_cfa_offset{,_sf}.

2010-04-27  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h: Fix truncated long macros.

2010-04-27  Kai Tietz  <kai.tietz@onevision.com>

        * collect2.c (TARGET_64BIT): Redefine to target's default.
        * tlink.c: Likewise.
        * config/i386/cygming.h (USER_LABEL_PREFIX): Define
        dependent to TARGET_64BIT and USE_MINGW64_LEADING_UNDERSCORES.
        * config/i386/i386.h (CRT_CALL_STATIC_FUNCTION): Use
        for underscoring __USER_LABEL_PREFIX__.
        * config/i386/mingw-w64.h (SUB_LINK_ENTRY): New macro.
        (SUB_LINK_ENTRY32): New.
        (SUB_LINK_ENTRY64): New.
        (LINK_SPEC): Replace entry point spec by SUB_LINK_ENTRY.
        * config/i386/mingw32 (SUB_LINK_ENTRY32): New.
        (SUB_LINK_ENTRY64): New.
        (SUB_LINK_ENTRY): New.
        (LINK_SPEC): Use SUB_LINK_ENTRY instead of hard-coded entry-point.
        (DWARF2_UNWIND_INFO): Error out for use of dw2 unwind when
        x64 target is choosen.
        * config.in (USE_MINGW64_LEADING_UNDERSCORES): New.
        * configure: Regenerated.
        * configure.ac (leading-mingw64-underscores): Option added.

2010-04-27  Jan Hubicka  <jh@suse.cz>

        * doc/invoke.texi (-fipa-profile): Document.
        * opts.c (decode_options): Enable ipa-profile at -O1.
        * timevar.def (TV_IPA_PROFILE): Define.
        * common.opt (fipa-profile): Add.
        * cgraph.c (cgraph_clone_node): Set local flag and clear vtable method
        flag for clones.
        (cgraph_propagate_frequency): Handle only local ones.
        * tree-pass.h (pass_ipa_profile): Declare.
        * ipa-profile.c (gate_profile): Use flag_ipa_profile.
        (pass_ipa_profile): Use TV_IPA_PROFILE.
        * ipa.c (ipa_profile): New function.
        (gate_ipa_profile): Likewise.
        (pass_ipa_profile): New global variable.
        * passes.c (pass_ipa_profile): New.

2010-04-27  Nathan Froyd  <froydnj@codesourcery.com>

        * config/arm/arm.c (arm_expand_builtin): Remove redundant declaration.

2010-04-27  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/43812
        * ipa.c (dissolve_same_comdat_group_list): New function.
        (function_and_variable_visibility): Call
        dissolve_same_comdat_group_list when comdat group contains external or
        newly local nodes.
        * cgraphunit.c (verify_cgraph_node): Verify that same_comdat_group
        lists are circular and that they contain only DECL_ONE_ONLY nodes.

2010-04-27  Eric Botcazou  <ebotcazou@adacore.com>

        * varasm.c (decode_addr_const): Handle special case of INDIRECT_REF.
        (const_hash_1) <VECTOR_CST>: New case.
        (compare_constant) <VECTOR_CST>: Likewise.
        <ADDR_EXPR>: Deal with LABEL_REFs.
        (copy_constant) <VECTOR_CST>: New case.

2010-04-27  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_propagate_frequency): New function.
        * cgraph.h (cgraph_propagate_frequency): Declare.
        * ipa-inline.c (cgraph_clone_inlined_nodes): Call
        cgraph_propagate_frequency.

2010-04-27  Jakub Jelinek  <jakub@redhat.com>

        * unwind-dw2.c (_Unwind_DebugHook): Add used and noclone attributes.

2010-04-27  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/40657
        * config/arm/arm.c (thumb1_extra_regs_pushed): New function.
        (thumb1_expand_prologue, thumb1_output_function_prologue): Call it
        here to determine which regs to push and how much stack to reserve.

2010-04-27  Jie Zhang  <jie@codesourcery.com>

        * doc/gimple.texi (gimple_statement_with_ops): Remove
        addresses_taken field.
        (gimple_statement_with_memory_ops): Likewise.

2010-04-27  Jan Hubicka  <jh@suse.cz>

        * tree-inline.c (eni_inlining_weights): Remove.
        (estimate_num_insns): Special case more builtins.

2010-04-27  Shujing Zhao  <pearly.zhao@oracle.com>

        PR c/32207
        * c-typeck.c (build_binary_op): Move forward check for comparison
        pointer with null pointer constant and adjust the diagnostic message.

2010-04-27  Dave Korn  <dave.korn.cygwin@gmail.com>

        PR lto/42776
        * configure.ac (gcc_cv_as_section_has_align): Set if installed
        binutils supports extended .section directive needed by LTO, or
        warn if older binutils found.
        (LTO_BINARY_READER): New AC_SUBST'd variable.
        (LTO_USE_LIBELF): Likewise.
        * gcc/config.gcc (lto_binary_reader): New target-specific configure
        variable.
        * gcc/Makefile.in (LTO_BINARY_READER): Import AC_SUBST'd autoconf var.
        (LTO_USE_LIBELF): Likewise.
        * configure: Regenerate.

        * collect2.c (is_elf): Rename from this ...
        (is_elf_or_coff): ... to this, and recognize and allow i386 COFF
         object files in addition to ELF-formatted ones.
        (scan_prog_file): Caller updated.  Also allow for LTO info marker
        symbol to be prefixed or not by an extra underscore.

        * config/i386/t-cygming (winnt.o): Also depend on LTO_STREAMER_H.
        * config/i386/winnt.c: Also #include lto-streamer.h
        (i386_pe_asm_named_section): Specify 1-byte section alignment for
        LTO named sections.
        (i386_pe_asm_output_aligned_decl_common): Add comment.
        (i386_pe_maybe_record_exported_symbol): Allow decl arg to be NULL.

2010-04-27  Hans-Peter Nilsson  <hp@bitrange.com>

        PR target/43889
        * config/mmix/mmix.md ("*divdi3_nonknuth", "*moddi3_nonknuth"):
        Add missing earlyclobber for second alternative.

2010-04-26  Bernd Schmidt  <bernds@codesourcery.com>

        * df-problems.c (df_simulate_initialize_forwards): Set, don't clear,
        bits for artificial defs at the top of the block.
        * fwprop.c (single_def_use_enter_block): Don't call it.

2010-04-26  Jack Howarth <howarth@bromo.med.uc.edu>

        PR 43715
        * gcc/configure.ac: Use "$gcc_cv_nm -g" on darwin
        instead of "$gcc_cv_objdump -T".
        Use "-undefined dynamic_lookup" on darwin.
        * gcc/configure: Regenerate.

2010-04-26  Jakub Jelinek  <jakub@redhat.com>

        PR c/43893
        * c-omp.c (c_finish_omp_for): Handle also EQ_EXPR.

2010-04-26  Nathan Froyd  <froydnj@codesourcery.com>

        * c-parser.c (struct c_token): Move location field up.
        * c-tree.h (struct c_typespec): Move expr_const_operands field up.
        (struct c_declspecs): Convert typespec_word, storage_class, and
        default_int_p into bitfields.
        (struct c_declarator): Move loc field up.

2010-04-26  Nathan Froyd  <froydnj@codesourcery.com>

        * cfgloop.h (struct loop): Move can_be_parallel field up.
        * ipa-prop.h (struct ip_node_params): Move bitfields up.
        * tree-ssa-loop-ivopts.c (struct version_info): Move inv_id field
        down.
        (struct iv_cand): Convert pos field into a bitfield.
        * tree-vectorizer.h (struct _loop_vec_info): Move loop_line_number
        field up.
        (struct _stmt_vec_info): Shuffle fields for better packing.

2010-04-26  Eric Botcazou  <ebotcazou@adacore.com>

        * varasm.c (IN_NAMED_SECTION): Remove guard.
        * config/arm/unknown-elf.h (IN_NAMED_SECTION): Rename to...
        (IN_NAMED_SECTION_P): ...this.
        (ASM_OUTPUT_ALIGNED_BSS): Adjust for above renaming.
        (ASM_OUTPUT_ALIGNED_DECL_LOCAL): Likewise.

2010-04-26  Eric Botcazou  <ebotcazou@adacore.com>

        * gimplify.c (gimplify_cond_expr): Use THEN_ and ELSE_ local variables.
        Use VOID_TYPE_P for all void type tests.  Adjust TYPE variable instead
        of shadowing it.  Fix comments.

2010-04-26  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_create_node): Set node frequency to normal.
        (cgraph_clone_node): Copy function frequency.
        * cgraph.h (node_frequency): New enum
        (struct cgraph_node): Add.
        * final.c (rest_of_clean_state): Update.
        * lto-cgraph.c (lto_output_node): Output node frequency.
        (input_overwrite_node): Input node frequency.
        * tre-ssa-loop-ivopts (computation_cost): Update.
        * lto-streamer-out.c (output_function): Do not output function
        frequency.
        * predict.c (maybe_hot_frequency_p): Update and handle functions
        executed once.
        (cgraph_maybe_hot_edge_p): Likewise; use cgraph frequency instead of
        attribute lookup.
        (probably_never_executed_bb_p, optimize_function_for_size_p): Update.
        (compute_function_frequency): Set noreturn functions to be executed
        once.
        (choose_function_section): Update.
        * lto-streamer-in.c (input_function): Do not input function frequency.
        * function.c (allocate_struct_function): Do not initialize function
        frequency.
        * function.h (function_frequency): Remove.
        (struct function): Remove function frequency.
        * ipa-profile.c (CGRAPH_NODE_FREQUENCY): Remove.
        (try_update): Update.
        * tree-inline.c (initialize_cfun): Do not update function frequency.
        * passes.c (pass_init_dump_file): Update.
        * i386.c (ix86_compute_frame_layout): Update.
        (ix86_pad_returns): Update.

2010-04-26  Jie Zhang  <jie@codesourcery.com>

        PR tree-optimization/43833
        * tree-vrp.c (range_int_cst_p): New.
        (range_int_cst_singleton_p): New.
        (extract_range_from_binary_expr): Optimize BIT_AND_EXPR case
        when both operands are constants.  Use range_int_cst_p in
        BIT_IOR_EXPR case.

2010-04-26  Jan Hubicka  <jh@suse.cz>

        * cgraphunit.c (cgraph_copy_node_for_versioning): Fix profile updating.

2010-04-26  Richard Guenther  <rguenther@suse.de>

        PR lto/43080
        * gimple.c (gimple_decl_printable_name): Deal gracefully
        with a NULL DECL_NAME.

2010-04-26  Richard Guenther  <rguenther@suse.de>

        PR lto/42425
        * tree.c (free_lang_data_in_type): Do not free TYPE_CONTEXT
        if emitting debug information and it is either a function
        or a namespace decl.

2010-04-26  Ira Rosen  <irar@il.ibm.com>

        * tree-vectorizer.h (struct _stmt_vec_info): Add new field to
        determine if the statement is vectorizable, and a macro to access it.
        * tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
        Skip statements that can't be vectorized. If the analysis fails,
        mark the statement as unvectorizable if vectorizing basic block.
        (vect_compute_data_refs_alignment): Likewise.
        (vect_verify_datarefs_alignment): Skip statements marked as
        unvectorizable. Add print.
        (vect_analyze_group_access): Skip statements that can't be
        vectorized. If the analysis fails, mark the statement as
        unvectorizable if vectorizing basic block.
        (vect_analyze_data_ref_accesses, vect_analyze_data_refs): Likewise.
        * tree-vect-stmts.c (vectorizable_store): Fix the number of
        generated stmts for SLP.
        (new_stmt_vec_info): Initialize the new field.
        * tree-vect-slp.c (vect_build_slp_tree): Fail to vectorize
        statements marked as unvectorizable.

2010-04-25  Joseph Myers  <joseph@codesourcery.com>

        * c-common.c (flag_isoc1x): New.
        (flag_isoc99): Update comment.
        * c-common.h (flag_isoc1x): New.
        (flag_isoc99): Update comment.
        * c-cppbuiltin.c (builtin_define_float_constants): Also define
        __<type>_DECIMAL_DIG__.
        * c-opts.c (set_std_c1x): New.
        (c_common_handle_option): Handle -std=c1x and -std=gnu1x.
        (set_std_c89, set_std_c99): Also set flag_isoc1x to 0.
        * c.opt (-std=c1x, -std=gnu1x): New options.
        * doc/cpp.texi: Mention -std=c1x.
        * doc/cppopts.texi (-std=c1x, -std=gnu1x): Document.
        * doc/extend.texi: Mention -std=c1x and -std=gnu1x.
        * doc/invoke.texi (-std=c1x, -std=gnu1x): Document.
        * doc/standards.texi: Mention C1X.
        * ginclude/float.h (FLT_DECIMAL_DIG, DBL_DECIMAL_DIG,
        LDBL_DECIMAL_DIG, FLT_HAS_SUBNORM, DBL_HAS_SUBNORM,
        LDBL_HAS_SUBNORM, FLT_TRUE_MIN, DBL_TRUE_MIN, LDBL_TRUE_MIN):
        Define for C1X.

2010-04-25  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/gmon-sol2.c (_mcleanup): Change format string
        placeholder from 0x%x to %#x.
        * config/i386/i386elf.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/i386-interix.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/att.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/sysv4.h (ASM_OUTPUT_ASCII): Ditto.
        * config/i386/i386.c (ix86_target_string): Ditto.
        (output_pic_addr_const): Ditto.
        (print_operand): Ditto.

2010-04-25  Paolo Bonzini  <bonzini@gnu.org>

        * combine.c (find_split_point): Add third argument.  Use it
        to find nested multiply-accumulate instructions.  Adjust calls.
        (try_combine): Adjust call to find_split_point.

2010-04-24  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/contrib.texi (Contributors): Add Dodji Seketeli.

2010-04-24  Bernd Schmidt  <bernds@codesourcery.com>

        PR tree-optimization/41442
        * fold-const.c (merge_truthop_with_opposite_arm): New function.
        (fold_binary_loc): Call it.

2010-04-23  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * toplev.c (general_init): Set default for fdiagnostics-show-option.
        * opts.c (common_handle_option): Allow disabling it.
        * common.opt (fdiagnostics-show-option): Add Var. Enabled by default.

2010-04-23  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (expand_expr_real_1) <VIEW_CONVERT_EXPR>: Only use conversion
        between modes if both types are integral.

2010-04-23  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43572
        * tree-tailcall.c (find_tail_calls): Allow PARM_DECL uses.

2010-04-23  Richard Guenther  <rguenther@suse.de>

        PR lto/43455
        * tree-inline.c (tree_can_inline_p): Also check compatibility
        of return types.

2010-04-23  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43846
        * tree-sra.c (struct access): New flag grp_assignment_read.
        (build_accesses_from_assign): Set grp_assignment_read.
        (sort_and_splice_var_accesses): Propagate grp_assignment_read.
        (enum mark_read_status): New type.
        (analyze_access_subtree): Propagate grp_assignment_read, create
        accesses also if both direct_read and root->grp_assignment_read.

2010-04-23  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/43835
        * tree-sra.c (ipa_sra_preliminary_function_checks): Check that the
        function does not have type attributes.

2010-04-23  Richard Guenther  <rguenther@suse.de>

        PR lto/42653
        * tree.c (free_lang_data_in_decl): Do not reset DECL_CONTEXT
        of FUNCTION_DECLs.

2010-04-22  Laurynas Biveinis  <laurynas.biveinis@gmail.com>

        * sese.h (create_if_region_on_edge): Remove.

        * sese.c (create_if_region_on_edge): Make static.

        * tree-inline.c: Do not include ggc.h.

        * expr.c: Do not include ggc.h.

        * Makefile.in (tree-inline.o, expr.o): Remove $(GGC_H) from
        dependencies.

2010-04-22  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43744
        * config/sh/sh.c (find_barrier): Don't emit a constant pool
        in the middle of insns for casesi_worker_2.

2010-04-22  David Edelsohn  <edelsohn@gnu.org>

        * config/rs6000/x-aix: Override LDFLAGS for all COMPILERS.

2010-04-22  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/43842
        * tree-vect-loop.c (vect_create_epilog_for_reduction): Handle
        loop unrolling in update of exit phis. Fix comment.
        * tree-vect-slp.c (vect_analyze_slp): Check that there are at
        least two reduction statements in the loop before starting SLP
        analysis.

2010-04-22  Nick Clifton  <nickc@redhat.com>

        * config/stormy16/stormy16-lib2.c (__ucmpsi2): Fix thinko.

2010-04-22  Alexander Monakov  <amonakov@ispras.ru>

        * tree-ssa-reassoc.c (eliminate_plus_minus_pair): Handle BIT_NOT_EXPR
        to simplify a + ~a.

2010-04-22  Laurynas Biveinis  <laurynas.biveinis@gmail.com>

        * tree-parloops.c (loop_parallel_p): New argument
        parloop_obstack.  Pass it down.
        (parallelize_loops): New variable parloop_obstack.  Initialize it,
        pass it down, free it.

        * tree-loop-linear.c (linear_transform_loops): Pass down
        lambda_obstack.

        * tree-data-ref.h (lambda_compute_access_matrices): New argument
        of type struct obstack *.

        * tree-data-ref.c (analyze_subscript_affine_affine): New variable
        scratch_obstack.  Initialize it, pass down, free it.

        * lambda.h (lambda_loop_new): Remove.
        (lambda_matrix_new, lambda_matrix_inverse)
        (lambda_trans_matrix_new, lambda_trans_matrix_inverse): New
        argument of type struct obstack *.

        * lambda-trans.c (lambda_trans_matrix_new): New argument
        lambda_obstack.  Pass it down, use obstack allocation for ret.
        (lambda_trans_matrix_inverse): New argument lambda_obstack.  Pass
        it down.

        * lambda-mat.c (lambda_matrix_get_column)
        (lambda_matrix_project_to_null): Remove.
        (lambda_matrix_new): New argument lambda_obstack.  Use obstack
        allocation for mat.
        (lambda_matrix_inverse_hard, lambda_matrix_inverse): New argument
        lambda_obstack.

        * lambda-code.c (lambda_loop_new): New function.
        (lambda_lattice_new, compute_nest_using_fourier_motzkin)
        (lambda_compute_auxillary_space, lambda_compute_target_space)
        (lambda_loopnest_transform, gcc_loop_to_lambda_loop)
        (lambda_loopnest_to_gcc_loopnest): Pass down lambda_obstack.
        (build_access_matrix): New argument lambda_obstack.  Use obstack
        allocation for am.
        (lambda_compute_step_signs, lambda_compute_access_matrices): New
        argument lambda_obstack.  Pass it down.

2010-04-22  Bernd Schmidt  <bernds@codesourcery.com>

        * optabs.h (expand_widening_mult): Declare.

2010-04-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43845
        * tree-ssa-pre.c (create_component_ref_by_pieces_1): Properly
        lookup the CALL_EXPR function and arguments.

2010-04-22  Nick Clifton  <nickc@redhat.com>

        * config/stormy16/stormy16.c
        (xstormy16_asm_output_aligned_common): Handle a NULL decl parameter.
        * config/stormy16/stormy16.h: Tidy up formatting.
        (DONT_USE_BUILTIN_SETJMP): Remove definition.
        * config/stormy16/stormy16.c (cbranchsi4): Delete pattern.
        (ineqbranchsi): Delete pattern.
        * config/stormy16/stormy16-lib2-ucmpsi2.c: New file.
        * config/stormy16/stormy16-lib2.c (__ucmpsi2): New function.
        * config/stormy16/t-stormy16 (LIB2FUNCS_EXTRA): Add
        stormy16-lib2-ucmpsi2.c.

2010-04-22  Bernd Schmidt  <bernds@codesourcery.com>

        * ifcvt.c (dead_or_predicable): Use df_simulate_find_defs and
        df_simulate_find_noclobber_defs as appropriate.  Keep track of an
        extra set merge_set_noclobber, and use it to relax the final test
        slightly.
        * df.h (df_simulate_find_noclobber_defs): Declare.
        * df-problems.c (df_simulate_find_defs): Don't ignore partial or
        conditional defs.
        (df_simulate_find_noclobber_defs): New function.

2010-04-22  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md: Use {} around multi-line preparation statements.

2010-04-22  Laurynas Biveinis  <laurynas.biveinis@gmail.com>

        * c-tree.h (push_init_level, pop_init_level, set_init_index)
        (process_init_element): New argument of type struct obstack *.

        * c-typeck.c (push_init_level, pop_init_level, set_designator)
        (set_init_index, set_init_label, set_nonincremental_init)
        (set_nonincremental_init_from_string, find_init_member)
        (output_init_element, output_pending_init_elements)
        (process_init_element): New argument braced_init_obstack.  Pass it
        down.
        (push_range_stack, add_pending_init): New argument
        braced_init_obstack.  Use obstack allocation.

        * c-parser.c (c_parser_initelt, c_parser_initval): New argument
        braced_init_obstack.  Pass it down.
        (c_parser_braced_init): New variables ret, braced_init_obstack.
        Initialize obstack, pass it down and finally free it.

2010-04-22  Bernd Schmidt  <bernds@codesourcery.com>

        PR middle-end/29274
        * tree-pass.h (pass_optimize_widening_mul): Declare.
        * tree-ssa-math-opts.c (execute_optimize_widening_mul,
        gate_optimize_widening_mul): New static functions.
        (pass_optimize_widening_mul): New.
        * expr.c (expand_expr_real_2) <case WIDEN_MULT_EXPR>: New case.
        <case MULT_EXPR>: Remove support for widening multiplies.
        * tree.def (WIDEN_MULT_EXPR): Tweak comment.
        * cfgexpand.c (expand_debug_expr) <case WIDEN_MULT_EXPR>: Use
        simplify_gen_unary rather than directly building extensions.
        * tree-cfg.c (verify_gimple_assign_binary): Add tests for
        WIDEN_MULT_EXPR.
        * expmed.c (expand_widening_mult): New function.
        * passes.c (init_optimization_passes): Add pass_optimize_widening_mul.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * timevar.def (TV_WHOPR_WPA_FIXUP): Remove.
        * lto-section-in.c (lto_section_name): Remove wpa_fixup.
        * lto-wpa-fixup.c: Remove.
        * Makefile.in (lto-wpa-fixup.o): Remove.
        * passes.c (init_optimization_passes): Remove pass_ipa_lto_wpa_fixup.
        (execute_all_ipa_transforms): Set cgraph_state to CGRAPH_STATE_IPA_SSA.
        * lto-streamer.c (lto_get_section_name): Remove wpa_fixup section.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * tree-pass.h (ipa_opt_pass_d): Rename function_read_summary;
        add write_optimization_summary, read_optimization_summary.
        (ipa_write_summaries_of_cgraph_node_set): Remove.
        (ipa_write_optimization_summaries): Declare.
        (ipa_read_optimization_summaries): Declare.
        * ipa-cp.c (pass_ipa_cp): Update.
        * ipa-reference.c (pass_ipa_reference): Update.
        * ipa-pure-const.c (pass_ipa_pure_const): Update.
        * lto-streamer-out.c (pass_ipa_lto_gimple, pass_ipa_lto_finish):
        Update.
        * ipa-inline.c (pass_ipa_inline): Update.
        * ipa.c (pass_ipa_whole_program): Update.
        * lto-wpa-fixup.c (pass_ipa_lto_wpa_fixup): Update.
        * passes.c (ipa_write_summaries_1): Do not test wpa.
        (ipa_write_optimization_summaries_1): New.
        (ipa_write_optimization_summaries): New.
        (ipa_read_summaries): Do not test ltrans.
        (ipa_read_optimization_summaries_1): New.
        (ipa_read_optimization_summaries): New.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * lto-cgraph.c (lto_output_node): Do not output comdat groups
        for boundary nodes.
        (output_cgraph): Do not arrange comdat groups for boundary nodes.

2010-04-21  Jakub Jelinek  <jakub@redhat.com>

        PR debug/40040
        * dwarf2out.c (add_name_and_src_coords_attributes): Add
        DW_AT_{,MIPS_}linkage_name even for Fortran decls.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * ipa-prop.c (ipa_edge_removal_hook): Check for bounds.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * varpool.c (decide_is_variable_needed): Variable is always needed
        during ltrans.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * opts.c (decode_options): Enable pure-const pass for whopr.

2010-04-21  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (dump_cgraph_node): Dump also assembler name.
        * ipa-inline.c (cgraph_decide_inlining_of_small_functions): Do not ice
        at WPA dumping.
        (cgraph_decide_inlining): Do not expect callee to be removed in all
        cases.

2010-04-21  Eric B. Weddington  <eric.weddington@atmel.com>

        * config/avr/avr-devices.c (avr_mcu_types): Add missing comma.

2010-04-21  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (x86_shrd): Add athlon_decode and
        amdfam10_decode attributes.

2010-04-21  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/43570
        * omp-low.c (scan_sharing_clauses): Don't scan_omp_op
        OMP_CLAUSE_DECL for OMP_CLAUSE_COPYPRIVATE.
        (lower_copyprivate_clauses): Use private var in outer
        context instead of original var.  Make sure the types
        are correct for VLAs.

2010-04-21  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (do_ds_constraint): Avoid escaping
        to non-pointer objects.

2010-04-21  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (add_var_loc_to_decl): Add LABEL argument.  Drop
        last chain entry if it starts with the still current label.
        (add_location_or_const_value_attribute): Check that
        loc_list->first->next is NULL instead of comparing ->first with ->last.
        (dwarf2out_var_location): Pass last_label resp. last_postcall_label
        to add_var_loc_to_decl.

        * dwarf2out.c (output_call_frame_info): For dw_cie_version
        >= 4 add also address size and segment size fields into CIE header.

        * unwind-dw2.c (extract_cie_info): Handle CIE version 4, as
        long as address size is the same as sizeof (void *) and
        segment size is 0.
        * unwind-dw2-fde.c (get_cie_encoding): Likewise.  If
        address size or segment size is unexpected, return DW_EH_PE_omit.
        (classify_object_over_fdes): If get_cie_encoding returned
        DW_EH_PE_omit, return -1.
        (init_object): If classify_object_over_fdes returned -1,
        pretend there were no FDEs at all.

2010-04-21  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (bswap<mode>2): Macroize expander from
        bswap{si,di}2 using SWI48 mode iterator.
        (*bswap<mode>2_movbe): Macroize insn from *bswap{si,di}_movbe using
        SWI48 mode iterator.  Set type attribute of bswap insn to bitmanip,
        set modrm attribute of bswap insn to 0 and remove length attribute.
        (*bswap<mode>2_1): Macroize insn from *bswap{si,di}_1 using SWI48 mode
        iterator.  Set type attribute to bitmanip, set modrm attribute to 0,
        set mode attribute to <MODE> and remove length attribute.

2010-04-20  James E. Wilson  <wilson@codesourcery.com>

        PR rtl-optimization/43520
        * ira-lives.c (ira_implicitly_set_insn_hard_regs): Exclude classes with
        zero available registers.

2010-04-20  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (fold_builtin_cproj): Fold more cases.

2010-04-20  Kaveh R. Ghazi  <ghazi@caip.rutgers.edu>

        * builtins.c (build_complex_cproj, fold_builtin_cproj): New.
        (fold_builtin_1): Fold builtin cproj.
        * builtins.def (BUILT_IN_CPROJ, BUILT_IN_CPROJF, BUILT_IN_CPROJL):
        Use ATTR_CONST_NOTHROW_LIST.

2010-04-20  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (ffs<mode>2): Macroize expander from ffs_cmove
        and ffsdi2 using SWI48 mode iterator.  Expand SImode insn through
        ffsi2_no_cmove for !TARGET_CMOVE.
        (ffssi2_no_cmove): Rename from *ffs_no_cmove.  Make public.
        (ffssi2): Remove expander.
        (*ffs<mode>_1): Macroize insn from *ffs{si,di} using SWI48
        mode iterator.
        (ctz<mode>2): Ditto from ctz{si,di}2.
        (clz<mode>2): Macroize expander from ctz{hi,si,di}2 using SWI248
        mode iterator.
        (clz<mode>2_abm): Macroize insn from clz{hi,si,di}2_abm using SWI248
        mode iterator.

2010-04-20  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (AT_linkage_name): Define.
        (clone_as_declaration): Handle DW_AT_linkage_name.
        (add_name_and_src_coords_attributes): Use AT_linkage_name instead
        of DW_AT_MIPS_linkage_name.
        (move_linkage_attr): Likewise.
        (dwarf2out_finish): Likewise.

2010-04-20  Xinliang David Li  <davidxl@gcc.gnu.org>

        PR middle-end/41952
        * fold-const.c (fold_comparison): New folding rule.

2010-04-20  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (double_int_setbit): Declare.
        * double-int.c (double_int_setbit): New function.
        * rtl.h (immed_double_int_const): Declare.
        * emit-rtl.c (immed_double_int_const): New function.
        * builtins.c (expand_builtin_signbit): Clean up, use double_int_*
        and immed_double_int_const functions.
        * optabs.c (expand_absneg_bit, expand_copysign_absneg,
        expand_copysign_bit):  (Ditto.).
        * simplify-rtx.c (simplify_binary_operation_1): (Ditto.).
        * tree-ssa-address.c (addr_for_mem_ref): (Ditto.).
        * dojump.c (prefer_and_bit_test): (Ditto.).
        * expr.c (convert_modes, reduce_to_bit_field_precision,
        const_vector_from_tree): (Ditto.).
        * expmed.c (mask_rtx, lshift_value): (Ditto.).

2010-04-20  Jan Hubicka  <jh@suse.cz>

        * cgraph.c (cgraph_remove_node): Kill bodies in other partitoin.
        (dump_cgraph_node): Dump new flags.
        * cgraph.h (struct cgraph_node): Add flags
        reachable_from_other_partition and in_other_partition.
        (cgraph_can_remove_if_no_direct_calls_p): Functions used by
        other partition can not be removed.
        * cgraphunit.c (cgraph_mark_functions_to_output): Functions used by
        the other partition must be output; silence sanity checking on
        leaking functions bodies from other paritition.
        * lto-cgraph.c (reachable_from_other_partition_p): New function.
        (lto_output_node): Output new flags; do not sanity check that inline
        clones are output; drop lto_forced_extern_inline_p code; do not mock
        visibility flags at partition boundaries.
        (add_node_to): New function.
        (output_cgraph): Use it to sort functions so masters appear before
        clones.
        (input_overwrite_node): Input new flags.
        * passes.c (ipa_write_summaries): Do not call
        lto_new_extern_inline_states.
        * lto-section-out.c (forced_extern_inline,
        lto_new_extern_inline_states lto_delete_extern_inline_states,
        lto_force_functions_extern_inline, lto_forced_extern_inline_p): Kill.
        * lto-streamer.h (lto_new_extern_inline_states,
        * lto_delete_extern_inline_states, lto_force_functions_extern_inline,
        lto_forced_extern_inline_p): Kill.

2010-04-20  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (do_sd_constraint): Add edges only
        from vars that can have pointers.
        (process_constraint): Dump useless constraints.

2010-04-20  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (do_structure_copy): Properly handle DEREF.
        (dump_sa_points_to_info): Remove asserts.
        (init_base_vars): nothing_id isn't an escape point nor does it
        have pointers.

2010-04-20  Jakub Jelinek  <jakub@redhat.com>

        * tree.h (TYPE_REF_IS_RVALUE): Define.
        * dwarf2out.c (attr_checksum_ordered, is_type_die, is_comdat_die,
        should_move_die_to_comdat, prune_unused_types_walk): Handle
        DW_TAG_rvalue_reference_type like DW_TAG_reference_type.
        (modified_type_die, gen_reference_type_die): Emit
        DW_TAG_rvalue_reference_type instead of DW_TAG_reference_type
        if TYPE_REF_IS_RVALUE and -gdwarf-4.

2010-04-20  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR target/43635
        * config/s390/s390.c (s390_emit_call): Turn direct into indirect
        calls for -fpic -m31 if they have been sibcall optimized.

2010-04-19  James E. Wilson  <wilson@codesourcery.com>

        * config/ia64/ia64.h (FIXED_REGISTERS, CALL_USED_REGISTERS): Make
        ar.lc fixed and call-used.

        * config/ia64/ia64.c (TARGET_INVALID_WITHIN_DOLOOP): Define.

2010-04-19  Jan Hubicka  <jh@suse.cz>

        * opts.c (decode_options): Disable whpr incompatible passes.
        * lto/lto.c (lto_1_to_1_map): Skip clones.
        (read_cgraph_and_symbols): Do not mark everything as needed.
        (do_whole_program_analysis): Do map only after optimizing;
        set proper cgraph_state; use passmanager.

2010-04-19  DJ Delorie  <dj@redhat.com>

        * cfgexpand.c (expand_debug_expr): Check for mismatched modes in
        POINTER_PLUS_EXPR and fix them.

2010-04-19  Eric B. Weddington  <eric.weddington@atmel.com>

        * config/avr/avr-devices.c (avr_mcu_types): Add support for new
        devices atmega644pa, attiny2313a, attiny24a, attiny261a, attiny4313,
        attiny44a, attiny861a, atmega16a, atmega168a, atmega164a, atmega165a,
        atmega169a, atmega169pa, atmega16hva2, atmega324a, atmega324pa,
        atmega325a, atmega3250a, atmega328, atmega329a, atmega329pa,
        atmega3290a, atmega48a, atmega644a, atmega645a, atmega645p,
        atmega6450a, atmega6450p, atmega649a, atmega649p, atmega6490a,
        atmega6490p, atmega64hve, atmega88a, atmega88pa, attiny461a, attiny84a,
        m3000. Remove support for devices atmega8m1, atmega8c1, atmega16c1,
        atmega4hvd, atmega8hvd, attiny327, m3000f, m3000s, m3001b.
        * config/avr/t-avr.c (MULTILIB_MATCHES): Same.

2010-04-19  Eric Botcazou  <ebotcazou@adacore.com>

        * ifcvt.c (noce_try_cmove_arith): Fix long lines.
        (check_cond_move_block): Likewise.
        (cond_move_process_if_block): Likewise.
        (noce_find_if_block): Improve formatting.
        (find_if_header): Pass 0 to memset and tweak conditions.
        (cond_exec_find_if_block): Fix long lines and tweak conditions.

2010-04-19  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (lower_bound_default): For DW_LANG_Python return 0
        for -gdwarf-4.

        PR middle-end/43337
        * tree-nested.c (convert_nonlocal_omp_clauses): OMP_CLAUSE_PRIVATE
        with non-local decl doesn't need chain.

2010-04-19  Vladimir Makarov  <vmakarov@redhat.com>

        * ira-color.c (allocno_reload_assign): Avoid accumulating
        reload registers in ALLOCNO_TOTAL_CONFLICT_HARD_REGS.

2010-04-19  Martin Jambor  <mjambor@suse.cz>

        * gimple.h (create_tmp_reg): Declare.
        * gimplify.c (create_tmp_reg): New function.
        (gimplify_return_expr): Use create_tmp_reg.
        (gimplify_omp_atomic): Likewise.
        (gimple_regimplify_operands): Likewise.
        * tree-dfa.c (make_rename_temp): Likewise.
        * tree-predcom.c (predcom_tmp_var): Likewise.
        (reassociate_to_the_same_stmt): Likewise.
        * tree-sra.c (replace_uses_with_default_def_ssa_name): Likewise.
        (get_replaced_param_substitute): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-ssa-phiopt.c (cond_store_replacement): Likewise.
        * tree-ssa-pre.c (get_representative_for): Likewise.
        (create_expression_by_pieces): Likewise.
        * tree-tailcall.c (adjust_return_value_with_ops): Likewise.
        (create_tailcall_accumulator): Likewise.

2010-04-19  Martin Jambor  <mjambor@suse.cz>

        * cgraphunit.c (cgraph_redirect_edge_call_stmt_to_callee): Update
        new_stmt.
        (cgraph_materialize_all_clones): Assert !need_ssa_update_p.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43796
        * tree-vrp.c (adjust_range_with_scev): Lookup init and step
        from SCEV in the lattice.
        (vrp_visit_phi_node): Dump change.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        * configure.ac: Fix quoting around elf_getshstrndx ABI check.
        * configure: Re-generated.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43783
        * tree-ssa-pre.c (create_component_ref_by_pieces_1): Drop
        constant ARRAY_REF operands two and three if possible.

2010-04-19  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43766
        * config/i386/i386.c (ix86_decompose_address): Handle ASHIFT addends.

2010-04-19  Jie Zhang  <jie@codesourcery.com>

        PR target/43662
        * reginfo.c (reinit_regs): Set caller_save_initialized_p to false.

2010-04-19  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/37027
        * tree-vectorizer.h (struct _loop_vec_info): Add new field reductions
        and macro to access it.
        (vectorizable_reduction): Add argument.
        (vect_get_slp_defs): Likewise.
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Collect reduction
        statements for possible use in SLP.
        (new_loop_vec_info): Initialize LOOP_VINFO_REDUCTIONS.
        (destroy_loop_vec_info): Free LOOP_VINFO_REDUCTIONS.
        (vect_create_epilog_for_reduction): Handle SLP. Modify documentation,
        add new argument.
        (vectorizable_reduction): Likewise.
        * tree-vect-stmts.c (vect_get_vec_defs): Update call to
        vect_get_slp_defs.
        (vectorizable_type_demotion, vectorizable_type_promotion,
        vectorizable_store): Likewise.
        (vect_analyze_stmt): Update call to vectorizable_reduction.
        (vect_transform_stmt): Likewise.
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Handle reduction.
        (vect_build_slp_tree): Fix indentation. Check that there are no loads
        from different interleaving chains in same node.
        (vect_slp_rearrange_stmts): New function.
        (vect_supported_load_permutation_p): Allow load permutations for
        reductions. Call vect_slp_rearrange_stmts() to rearrange statements
        inside SLP nodes if necessary.
        (vect_analyze_slp_instance): Handle reductions.
        (vect_analyze_slp): Try to build SLP instances originating from groups
        of reductions.
        (vect_detect_hybrid_slp_stmts): Skip reduction statements.
        (vect_get_constant_vectors): Create initial vectors for reductions
        according to reduction code. Add new argument.
        (vect_get_slp_defs): Add new argument, pass it to
        vect_get_constant_vectors.
        (vect_schedule_slp_instance): Remove SLP tree root statements.

2010-04-19  Jakub Jelinek  <jakub@redhat.com>

        * tree.h (ENUM_IS_SCOPED): Define.
        * dwarf2out.c (gen_enumeration_type_die): Add DW_AT_enum_class
        for ENUM_IS_SCOPED enums.

2010-04-18  Eric Botcazou  <ebotcazou@adacore.com>

        * fold-const.c (fold_comparison): Use ssizetype.
        * gimple-fold.c (maybe_fold_offset_to_array_ref): Likewise.
        * ipa-prop.c (ipa_modify_call_arguments): Use sizetype.
        * tree-loop-distribution.c (build_size_arg_loc): Likewise.
        * tree-object-size.c (compute_object_sizes): Use size_type_node.

        * tree.h (initialize_sizetypes): Remove parameter.
        (build_common_tree_nodes): Remove second parameter.
        * stor-layout.c (initialize_sizetypes): Remove parameter.
        Always create an unsigned type.
        (set_sizetype): Assert that the passed type is unsigned and simplify.
        * tree.c (build_common_tree_nodes): Remove second parameter.
        Adjust call to initialize_sizetypes.
        * c-decl.c (c_init_decl_processing): Remove second argument in call to
        build_common_tree_nodes.

2010-04-18  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (main): Search for liblto_plugin.so with mode R_OK.

2010-04-18  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/43771
        * tree-vect-slp.c (vect_supported_load_permutation_p): Check that
        load permutation doesn't have gaps.

2010-04-18  Jan Hubicka  <jh@suse.cz>

        * i386.md (UNSPEC_SSE_PROLOGUE_SAVE_LOW): New.
        (sse_prologue_save_insn expander): Use new pattern.
        (sse_prologue_save_insn1): New pattern and splitter.
        (sse_prologue_save_insn): Update to deal also with 64bit aligned
        blocks.
        * i386.c (setup_incoming_varargs_64): Do not compute jump
        destination here.
        (ix86_gimplify_va_arg): Update alignment needed.
        (ix86_local_alignment): Do not align all local arrays to 128bit.

2010-04-17  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (cgraph_early_inlining): Handle flattening too.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (negdi2): Remove redundant code to force values into a
        register.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm/bpabi.S: Add EABI alignment attributes to objects.
        * arm/bpabi-v6m.S: Likewise.
        * arm/crti.asm: Likewise.
        * arm/crtn.asm: Likewise.
        * arm/lib1funcs.asm: Likewise.
        * arm/libunwind.S: Likewise.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm-protos.h (tune_params): New structure.
        * arm.c (current_tune): New variable.
        (arm_constant_limit): Delete.
        (struct processors): Add pointer to the tune parameters.
        (arm_slowmul_tune): New tuning option.
        (arm_fastmul_tune, arm_xscale_tune, arm_9e_tune): Likewise.
        (all_cores): Adjust to pick up the tuning model.
        (arm_constant_limit): New function.
        (arm_override_options): Select the appropriate tuning model.  Delete
        initialization of arm_const_limit.
        (arm_split_constant): Use the new constant-limit model.
        (arm_rtx_costs): Pick up the current tuning model.
        * arm.md (is_strongarm, is_xscale): Delete.
        * arm-generic.md (load_ldsched_x, load_ldsched): Test explicitly
        for Xscale variant architectures.
        (mult_ldsched_strongarm, mult_ldsched): Similarly for StrongARM.

2010-04-17  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/arm/arm.c (arm_gen_constant): Remove unused variable
        can_shift.
        (arm_rtx_costs_1): Remove unused variable extra_cost.
        (arm_unwind_emit_set): Use variable offset.
        (thumb1_output_casesi): Remove unused variable flags.

2010-04-16  Jeff Law  <law@redhat.com>

        * ira-color.c (ira_reassign_pseudos): Collect and sort all the pseudos
        needing assignment rather than doing a two-phase assignment.  Remove
        unused variable 'm'.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43767
        * alias.c (memrefs_conflict_p): Don't crash if CSELIB_VAL_PTR is NULL.

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * tree-ssa-reassoc.c (struct operand_entry): Add new field ID.
        (next_operand_entry_id): New static variable.
        (sort_by_operand_rank): Stabilize qsort comparator by using unique IDs.
        (add_to_ops_vec): Assigned unique ID to operand entry.
        (struct oecount_s): New field ID.
        (oecount_cmp): Stabilize qsort comparotor by using unique IDs.
        (undistribute_ops_list): Assign unique IDs to oecounts.
        (init_reassoc): reset next_operand_entry_id.

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * config/i386/i386.md (*jcc_bt<mode>): Fix build breakage by adding
        missing left parenthesis.

2010-04-16  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*bt<mode>): Macroize insn from *btsi and
        *btdi_rex64 using SWI48 mode iterator.
        (*jcc_bt<mode>): Ditto from *jcc_btsi and *jcc_btdi_rex64.
        (*jcc_bt<mode>_mask): Ditto from *jcc_btsi_mask and
        *jcc_btdi_mask_rex64.

2010-04-16  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (tree_to_double_int): Convert to macro.
        * double-int.c (tree_to_double_int): Remove.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43762
        * dwarf2out.c (add_bound_info): Always call loc_list_from_tree
        with want_address 2 and in case a single element list might be
        possible, call it again with want_address 0.

2010-04-12  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/h8300/h8300.c (print_operand) : Modify case 'V' and
        case 'W' print operands for HI mode.
        * config/h8300/h8300.h (Y0, Y2) : New constraints.
        * config/h8300/h8300.md (bclrqi_msx, bclrhi_msx): New patterns
        (bsetqi_msx, bsethi_msx, bnotqi_msx, bnothi_msx): Likewise.
        * config/h8300/predicate.md (bit_register_indirect_operand): New.

        * config/h8300/h8300.h (OK_FOR_U): Support 'U' constraint for H8300SX.

        * config/h8300/h8300.md (movqi_h8sx, movhi_h8sx, movsi_h8sx,
        cmphi_h8300hs_znvc, cmpsi, addhi3_h8sx) : Emit instructions in
        #xx:3 and #xx:4 mode.

        * config/h8300/h8300.md (inverted load with HImode dest): Add
        support for H8300SX.

        * config/h8300/predicate.md (bit_operand): Allow immediate values that
        satisfy 'U' constraint.

2010-04-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx flavor.
        * configure: Regenerate.
        * config.in: Regenerate.
        * doc/install.texi (Prerequisites): Document that Solaris 2 libelf
        works.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * tree.h (struct tree_decl_minimal): Move pt_uid ...
        (struct tree_decl_common): ... here.
        (DECL_PT_UID): Adjust.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43572
        * tree-ssa-alias.h (call_may_clobber_ref_p): Declare.
        * tree-ssa-alias.c (call_may_clobber_ref_p): Export.
        * tree-flow.h (is_call_clobbered): Remove.
        * tree-flow-inline.h (is_call_clobbered): Likewise.
        * tree-dfa.c (dump_variable): Do not dump call clobber state.
        * tree-nrv.c (dest_safe_for_nrv_p): Use the alias oracle.
        (execute_return_slot_opt): Adjust.
        * tree-tailcall.c (suitable_for_tail_opt_p): Remove
        check for call clobbered vars here.
        (find_tail_calls): Move tailcall verification to the
        proper place.

2010-04-16  Diego Novillo  <dnovillo@google.com>

        * doc/invoke.texi: Explain how are unrecognized -Wno- warnings handled.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/40603
        * config/arm/arm.md (cbranchqi4): New pattern.
        * config/arm/predicates.md (const0_operand,
        cbranchqi4_comparison_operator): New predicates.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * gimple-pretty-print.c (dump_gimple_phi): Dump alias info.
        (dump_gimple_stmt): Likewise.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        * recog.h (struct recog_data): New field is_operator.
        (struct insn_operand_data): New field is_operator.
        * recog.c (extract_insn): Set recog_data.is_operator.
        * genoutput.c (output_operand_data): Emit code to set the
        is_operator field.
        * reload.c (find_reloads): Use it rather than testing for an
        empty constraint string.

        PR target/41514
        * config/arm/arm.md (cbranchsi4_insn): Renamed from "*cbranchsi4_insn".
        If the previous insn is a cbranchsi4_insn with the same arguments,
        omit the compare instruction.

        * config/arm/arm.md (addsi3_cbranch): If destination is a high
        register, inputs must be low registers and we need a low register
        scratch.  Handle alternative 2 like alternative 3.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        * alias.c (memrefs_conflict_p): If x and y are the same VALUE,
        don't call get_addr on both.  If one expression is a VALUE and
        the other a REG, check VALUE's locs if the REG isn't among them.

2010-04-16  Christian Bruel  <christian.bruel@st.com>

        * config/sh/sh.h (sh_frame_pointer_required): New function.
        * config/sh/sh.h (TARGET_FRAME_POINTER_REQUIRED): New macro.
        (flag_omit_frame_pointer) Set.
        (MASK_ACCUMULATE_OUTGOING_ARGS) Define and Set.
        (rounded_frame_size): Adjust size with outgoing_args_size.
        (sh_set_return_address): Must return from stack pointer.
        * gcc/config/sh/sh.h (CAN_DEBUG_WITHOUT_FP): Define.
        (SUBTARGET_FRAME_POINTER_REQUIRED): Define.
        (ACCUMULATE_OUTGOING_ARGS): Define.
        * doc/invoke.texi (maccumulate-outgoing-args): Document for SH.
        * gcc/config/sh/sh.opt: (maccumulate-outgoing-args): New option.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43471
        * config/sh/sh.c (sh_legitimize_reload_address): Use
        MAYBE_BASE_REGISTER_RTX_P instead of BASE_REGISTER_RTX_P.
        Remove a unneeded check for offset_base.

2010-04-15  H.J. Lu  <hongjiu.lu@intel.com>

        * configure: Regenerated.

2010-04-15  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_call_save_register_used): Switch back
        to HARD_REGNO_NREGS.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * alias.c (alias_set_subset_of): Handle alias-set zero
        child properly.

2010-04-15  Mark Shinwell  <shinwell@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * config/arm/thumb2.md (thumb2_movsi_insn): Split ldr and str
        alternatives according to use of high and low regs.
        * config/arm/vfp.md (thumb2_movsi_vfp): Likewise.
        * config/arm/arm.h (CONDITIONAL_REGISTER_USAGE): Use high regs when
        optimizing for size on Thumb-2.

2010-04-15  Thomas Schwinge  <tschwinge@gnu.org>

        * config.gcc <i[34567]86-*-gnu*>: Handle softfp as for Linux.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (struct variable_info): Add
        is_fn_info flag.
        (new_var_info): Initialize it.
        (dump_constraints): Support printing last added constraints.
        (debug_constraints): Adjust.
        (dump_constraint_graph): Likewise.
        (make_heapvar_for): Check for NULL cfun.
        (get_function_part_constraint): New function.
        (get_fi_for_callee): Likewise.
        (find_func_aliases): Properly implement IPA PTA constraints.
        (process_ipa_clobber): New function.
        (find_func_clobbers): Likewise.
        (insert_into_field_list_sorted): Remove.
        (create_function_info_for): Properly allocate vars for IPA mode.
        Do not use insert_into_field_list_sorted.
        (create_variable_info_for): Properly generate constraints for
        global vars in IPA mode.
        (dump_solution_for_var): Always dump the solution.
        (set_uids_in_ptset): Initialize DECL_PT_UID if in ipa-mode.
        (find_what_var_points_to): Adjust.
        (pt_solution_set): Change.
        (pt_solution_ior_into): New function.
        (pt_solution_empty_p): Export.
        (pt_solution_includes_global): Adjust.
        (pt_solution_includes_1): Likewise.
        (pt_solutions_intersect_1): Likewise.
        (dump_sa_points_to_info): Check some invariants.
        (solve_constraints): Move constraint dumping ...
        (compute_points_to_sets): ... here.
        (ipa_pta_execute): ... and here.
        (compute_may_aliases): Do not re-compute points-to info
        locally if IPA info is available.
        (ipa_escaped_pt): New global var.
        (ipa_pta_execute): Properly implement IPA PTA.
        * tree-into-ssa.c (dump_decl_set): Support dumping
        decls not in referenced-vars.
        * tree-flow.h (struct gimple_df): Add ipa_pta flag.
        * tree-ssa-alias.c (ptr_deref_may_alias_decl_p): Adjust.
        (dump_points_to_solution): Likewise.
        * tree-dfa.c (dump_variable): Also dump DECL_PT_UID.
        * tree-inline.c (remap_ssa_name): Copy IPA points-to solution.
        (remap_gimple_stmt): Reset call clobber/use information if necessary.
        (copy_decl_to_var): Copy DECL_PT_UID.
        (copy_result_decl_to_var): Likewise.
        * tree.c (make_node_stat): Initialize DECL_PT_UID.
        (copy_node_stat): Copy it.
        * tree.h (DECL_PT_UID): New macro.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.
        (struct tree_decl_minimal): Add pt_uid member.
        * tree-ssa-alias.h (struct pt_solution): Add ipa_escaped flag.
        (pt_solution_empty_p): Declare.
        (pt_solution_set): Adjust.
        (ipa_escaped_pt): Declare.
        * cfgexpand.c (update_alias_info_with_stack_vars): Adjust.
        * gimple-pretty-print.c (pp_points_to_solution): New function.
        (dump_gimple_call): Dump call clobber/use information.
        * tree-dump.c (dump_option_value_in): Add TDF_ALIAS entry.
        * tree-pass.h (TDF_ALIAS): New dump option.
        * tree-pretty-print.c (dump_decl_name): Dump DECL_PT_UID if asked to.
        * doc/invoke.texi (-fipa-pta): Update documentation.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (OBJS-common): Add gimple-fold.o.
        (gimple-fold.o): New rule.
        * tree.h (maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_addition): Move
        prototypes ...
        * gimple.h: ... here.
        * tree-flow.h (fold_stmt, fold_stmt_inplace, get_symbol_constant_value,
        may_propagate_address_into_dereference): Move prototypes ...
        * gimple.h: ... here.
        * tree-ssa-ccp.c (get_symbol_constant_value,
        may_propagate_address_into_dereference, maybe_fold_offset_to_array_ref,
        maybe_fold_offset_to_component_ref, maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_indirect,
        maybe_fold_stmt_addition, maybe_fold_reference, get_maxval_strlen,
        ccp_fold_builtin, fold_gimple_assign, fold_gimple_cond,
        fold_gimple_call, fold_stmt_1, fold_stmt, fold_stmt_inplace,
        gimplify_and_update_call_from_tree): Move ...
        * gimple-fold.c: ... here.  New file.
        (ccp_fold_builtin): Rename to ...
        (gimple_fold_builtin): ... this.
        * tree-ssa-ccp.c (execute_fold_all_builtins): Adjust.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (LOWPART, HIGHPART, BASE, encode, decode,
        fit_double_type, force_fit_type_double, add_double_with_sign,
        neg_double, mul_double_with_sign, lshift_double, rshift_double,
        lrotate_double, rrotate_double, div_and_round_double): Move ...
        * double-int.c: ... here.
        * tree.h (force_fit_type_double, fit_double_type, add_double_with_sign,
        add_double, neg_double, mul_double_with_sign, mul_double,
        lshift_double, rshift_double, lrotate_double, rrotate_double,
        div_and_round_double): Move prototypes ...
        * double-int.h: ... here.

2010-04-15  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/43742
        * config/sh/sh.md (doloop_end_split, dect): Undo previous patch.  Use
        matching constraints to ensure inputs match the output.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43742
        * config/sh/sh.md (doloop_end_split): Remove "+r" constraint
        in an input-only operand.

2010-04-15  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (HOST_BITS_PER_DOUBLE_INT): Define.
        (double_int_not, double_int_lshift, double_int_rshift): Declare.
        (double_int_negative_p): Convert to static inline function.
        * double-int.c (double_int_lshift, double_int_lshift): New functions.
        (double_int_negative_p): Remove.
        * tree.h (lshift_double, rshift_double):
        * tree.c (build_low_bits_mask): Clean up, use double_int_* functions.
        * fold-const.c (fold_convert_const_int_from_real,
        fold_convert_const_int_from_fixed, div_if_zero_remainder): (Ditto.).
        (lshift_double): Change type of arith argument to bool.
        (rshift_double): Change type of arith argument to bool. Correct
        comment.
        * expmed.c (mask_rtx, lshift_value): (Ditto.).

2010-04-14  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/21803
        * ifcvt.c (cond_exec_process_if_block): Look for identical sequences
        at the start and end of the then/else blocks, and omit them from the
        conversion.
        * cfgcleanup.c (flow_find_cross_jump): No longer static.  Remove MODE
        argument; all callers changed.  Pass zero to old_insns_match_p instead.
        (flow_find_head_matching_sequence): New function.
        (old_insns_match_p): Check REG_EH_REGION notes for calls.
        * basic-block.h (flow_find_cross_jump,
        flow_find_head_matching_sequence): Declare functions.

2010-04-14  Jason Merrill  <jason@redhat.com>

        PR c++/36625
        * c-common.c (attribute_takes_identifier_p): New fn.
        * c-common.h: Declare it.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*divmod<mode>4): Remove stray "&&" from
        splitter condition.
        (*udivmod<mode>4): Ditto.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (maxmin_int): Rename code attribute from
        maxminiprefix and update all users.
        (maxmin_float): Ditto from maxminfprefix.
        (logic): Ditto from logicprefix.
        (absneg_mnemonic): Ditto from absnegprefix.
        * config/i386/mmx.md: Update all users of maxminiprefix,
        maxminfprefix and logicprefix for rename.
        * config/i386/sse.md: Ditto.
        * config/i386/sync.md (sync_<code><mode>): Update for
        logicprefix rename.

2010-04-14  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42966
        * diagnostics.c (diagnostic_report_diagnostic): Mark specially
        warnings converted to errors.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_adjust_cost): Remove set but not
        used insn_type variable.
        (function_value): Add ATTRIBUTE_UNUSED to dummy variable declaration
        to avoid set-but-not-used warning.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * df-core.c (df_ref_debug): Change format string placeholder
        from 0x%x to %#x.
        * dwarf2asm.c (dw2_asm_output_data_raw,
        dw2_asm_output_data_uleb128_raw, dw2_asm_output_data_uleb128,
        dw2_asm_output_data_sleb128_raw, dw2_asm_output_data_sleb128): Ditto.
        * dwarf2out.c (output_cfi, output_cfi_directive,
        dwarf2out_do_cfi_startproc, output_loc_sequence_raw,
        output_cfa_loc_raw, output_die, output_ranges, output_file_names):
        Ditto.
        * genattrtab.c (write_test_expr, write_attr_valueq): Ditto.
        * print-rtl.c (print_rtx): Ditto.

2010-04-14  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR middle-end/42694
        * builtins.c (expand_builtin_pow_root): New function to expand pow
        calls with exponents 0.25, 0.50, 0.75, 1./3., and 1./6. into a
        series of sqrt and cbrt calls under -ffast-math.
        (expand_builtin_pow): Call it.

2010-04-14  Michael Matz  <matz@suse.de>

        PR tree-optimization/42963
        * tree-cfg.c (touched_switch_bbs): New static variable.
        (group_case_labels_stmt): New function broken out from ...
        (group_case_labels): ... here, use the above.
        (start_recording_case_labels): Allocate touched_switch_bbs.
        (end_recording_case_labels): Deallocate it, call
        group_case_labels_stmt.
        (gimple_redirect_edge_and_branch): Remember index of affected BB.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*popcountsi2_cmp_zext): Remove mode attribute
        from insn template.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashlqi3_1_slp): New insn pattern.

2010-04-13  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (cgraph_mark_inline_edge): Avoid double accounting
        of optimized out static functions.
        (cgraph_edge_badness): Add DUMP parameter and dump reasons for the
        cost computation.  Also sanity check for overflows.
        (update_caller_keys): Update cgraph_edge_badness call; properly
        update fibheap and sanity check that it is up to date.
        (add_new_edges_to_heap): Update cgraph_edge_badness.
        (cgraph_decide_inlining_of_small_function): Likewise;
        add sanity checking that badness in heap is up to date;
        improve dumping of reason; Update badness of calls to the
        offline copy of function currently inlined; dump badness
        of functions not inlined because of unit growth limits.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/32628
        * c-common.c (pointer_int_sum): Disregard overflow that occured only
        because of sign-extension change when converting to sizetype here...
        * fold-const.c (fold_convert_const_int_from_int): ...and not here.

        * fold-const.c (fold_binary_op_with_conditional_arg): Do not restrict
        the folding to constants.  Remove redundant final conversion.
        (fold_binary) <associate>: Do not associate if the re-association of
        constants alone overflows.
        (fold_binary) <FLOOR_MOD_EXPR>: Move transformation into BIT_AND_EXPR
        to the end of the list.
        (multiple_of_p) <COND_EXPR>: New case.

2010-04-13  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * opt-functions.awk (opt_sanitized_name): New.
        (opt_enum): New.
        * optc-gen.awk: Use it
        * opth-gen.awk: Use it.

2010-04-13  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (replace_uses_with_default_def_ssa_name): New function.
        (sra_modify_assign): Delete stmts loading dead data even if racc has no
        children.  Call replace_uses_with_default_def_ssa_name to handle
        SSA_NAES on lhs.

2010-04-13  Michael Matz  <matz@suse.de>

        PR middle-end/43730
        * builtins.c (expand_builtin_interclass_mathfn): Also create
        a register if the predicate doesn't match.

2010-04-13  Diego Novillo  <dnovillo@google.com>

        * Makefile.in (c-pch.o, ggc-common.o): Depend on timevar.h.
        * c-pch.c: Include timevar.h.
        (c_common_write_pch): Use TV_PCH_SAVE and TV_PCH_CPP_SAVE timers.
        (c_common_read_pch): Use TV_PCH_RESTORE and TV_PCH_CPP_RESTORE timers.
        * ggc-common.c: Include timevar.h.
        (gt_pch_save): Use TV_PCH_PTR_REALLOC and TV_PCH_PTR_SORT timers.
        * timevar.def (TV_PCH_SAVE): Define.
        (TV_PCH_CPP_SAVE): Define.
        (TV_PCH_PTR_REALLOC): Define.
        (TV_PCH_PTR_SORT): Define.
        (TV_PCH_RESTORE): Define.
        (TV_PCH_CPP_RESTORE): Define.

2010-04-13  Michael Matz  <matz@suse.de>

        * tree-ssa-reassoc.c (repropagate_negates): Merge negates also
        into MINUS_EXPRs.
        (can_reassociate_p): New function.
        (break_up_subtract_bb, reassociate_bb): Use it.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/43737
        * builtins.c (c_readstr): Fix assert.

2010-04-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (extendsidi2 splitter): Also check for DX_REG
        when generating cltd insn.

        (*ashl<mode>3_1): Remove special handling for register operand 2.
        (*ashlsi3_1_zext): Ditto.
        (*ashlhi3_1): Ditto.
        (*ashlhi3_1_lea): Ditto.
        (*ashlqi3_1): Ditto.
        (*ashlqi3_1_lea): Ditto.
        (*<shiftrt_insn><mode>3_1): Ditto.
        (*<shiftrt_insn>si3_1_zext): Ditto.
        (*<shiftrt_insn>qi3_1_slp): Ditto.
        (*<rotate_insn><mode>3_1): Ditto.
        (*<rotate_insn>si3_1_zext): Ditto.
        (*<rotate_insn>qi3_1_slp): Ditto.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (callused_id): Remove.
        (call_stmt_vars): New.
        (get_call_vi): Likewise.
        (lookup_call_use_vi): Likewise.
        (lookup_call_clobber_vi): Likewise.
        (get_call_use_vi): Likewise.
        (get_call_clobber_vi): Likewise.
        (make_transitive_closure_constraints): Likewise.
        (handle_const_call): Adjust to do per-call call-used handling.
        (handle_pure_call): Likewise.
        (find_what_var_points_to): Remove general callused handling.
        (init_base_vars): Likewise.
        (init_alias_vars): Initialize call_stmt_vars.
        (compute_points_to_sets): Process call-used and call-clobbered
        vars for call statements.
        (delete_points_to_sets): Free call_stmt_vars.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
        Only add RW dependence for dependence distance zero.
        Adjust maximal vectorization factor according to dependences.
        Move alignment handling ...
        (vect_find_same_alignment_drs): ... here.  New function.
        (vect_analyze_data_ref_dependences): Adjust.
        (vect_analyze_data_refs_alignment): Call vect_find_same_alignment_drs.
        (vect_analyze_data_refs): Adjust minimal vectorization factor
        according to data references.
        * tree-vect-loop.c (vect_analyze_loop): Analyze data-ref
        dependences before determining the vectorization factor.
        Analyze alignment after determining the vectorization factor.
        * tree-vect-slp.c ((vect_slp_analyze_bb): Analyze data-ref
        dependences before alignment.
        * tree-vectorizer.h (vect_analyze_data_ref_dependences):
        Adjust prototype.
        (vect_analyze_data_refs): Likewise.
        (MAX_VECTORIZATION_FACTOR): New define.

2010-04-13  Duncan Sands  <baldrick@free.fr>

        * except.h (lang_eh_type_covers): Remove.
        * except.c (lang_eh_type_covers): Likewise.

2010-04-13  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
            Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * gcc/config/s390/s390.md: Replace TARGET_64BIT with TARGET_ZARCH.
        * gcc/config/s390/s390.c: Replace UNTIS_PER_WORD with
        UNITS_PER_LONG where it is ABI relevant.
        (s390_return_addr_rtx): Likewise.
        (s390_back_chain_rtx): Likewise.
        (s390_frame_area): Likewise.
        (s390_frame_info): Likewise.
        (s390_initial_elimination_offset): Likewise.
        (save_gprs): Likewise.
        (s390_emit_prologue): Likewise.
        (s390_emit_epilogue): Likewise.
        (s390_function_arg_advance): Likewise.
        (s390_function_arg): Likewise.
        (s390_va_start): Likewise.
        (s390_gimplify_va_arg): Likewise.
        (s390_function_profiler): Likewise.
        (s390_optimize_prologue): Likewise.
        (s390_rtx_costs): Likewise.
        (s390_secondary_reload): Likewise.
        (s390_promote_function_mode): Likewise.
        (s390_hard_regno_mode_ok): Replace TARGET_64BIT with TARGET_ZARCH.
        (s390_scalar_mode_supported_p): Disallow TImode if no 64 bit
        registers available.
        (s390_unwind_word_mode): New function.
        (s390_function_value): Split 64 bit values into register pair if
        used as return value.
        (s390_call_saved_register_used): Don't use HARD_REGNO_NREGS for
        function call parameters.  Handle parallels.
        (TARGET_SCALAR_MODE_SUPPORTED_P): New macro.
        (HARD_REGNO_CALL_PART_CLOBBERED): New macro.
        (DWARF_CIE_DATA_ALIGNMENT): New macro.
        (s390_expand_setmem): Remove unused variable src_addr.
        * gcc/longlong.h: Make smul_ppmm and sdiv_qrnnd inline asms to
        deal with 64 bit registers.
        * gcc/config/s390/s390.h: Define __zarch__ predefined macro.
        Replace UNITS_PER_WORD with UNITS_PER_LONG where it is ABI relevant.
        (UNITS_PER_LONG): New macro.
        * libjava/include/s390-signal.h: Define extended ucontext
        structure containing the upper halfs of the 64 bit registers.

2010-04-13  Simon Baldwin  <simonb@google.com>

        * cfgexpand.c (gimple_expand_cfg): Clarify warning message text.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple.c (walk_gimple_op) <GIMPLE_ASSIGN>: Do not request a pure
        rvalue on the RHS if the LHS is of a non-renamable type.
        * tree-ssa-ccp.c (maybe_fold_offset_to_component_ref): Fold result.

2010-04-13  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (cc1_options): Handle -iplugindir before processing
        the cc1 spec. Only add -iplugindir once.
        (cpp_unique_options): Add -iplugindir option if -fplugin* options
        found.
        * common.opt (iplugindir): Remove `Separate' property, initialize.
        * plugin.c (default_plugin_dir_name): Error with missing -iplugindir
        option.
        * Makefile.in (check-%, check-parallel-%): Create plugin dir.
        (distclean): Remove plugin dir.
        * doc/invoke.texi: Document -iplugindir.

2010-04-13  Basile Starynkevitch  <basile@starynkevitch.net>

        * doc/plugins.texi (Loading Plugins): Document short
        -fplugin=foo option.
        (Plugin API): Mention default_plugin_dir_name function.

        * gcc.c (find_file_spec_function): Add new declaration.
        (static_spec_func): Use it for "find-file".
        (find_file_spec_function): Add new function.
        (cc1_options): Add -iplugindir option if -fplugin* options found.

        * gcc-plugin.h (default_plugin_dir_name): Added new declaration.

        * plugin.c (add_new_plugin): Updated comment, and handle short
        plugin name.
        (default_plugin_dir_name): Added new function.

        * common.opt (iplugindir): New option to set the plugin directory.

2010-04-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_rotate): New code iterator.
        (rotate_insn): New code attribute.
        (rotate): Ditto.
        (SWIM124): New mode iterator.
        (<rotate_insn>ti3): New expander.
        (<rotate_insn>di3): Macroize expander from {rotl,rotr}di3 using
        any_rotate code iterator.
        (<rotate_insn><mode>3) Macroize expander from {rotl,rotr}{qi,hi,si}3
        using any_rotate code iterator and SWIM124 mode iterator.
        (ix86_rotlti3): New insn_and_split pattern.
        (ix86_rotrti3): Ditto.
        (ix86_rotl<dwi>3_doubleword): Macroize insn_and_split pattern from
        ix86_rotl{di,ti}3 patterns.
        (ix86_rotr<dwi>3_doubleword): Ditto from ix86_rotr{di,ti}3 patterns.
        (*<rotate_insn><mode>3_1): Merge with *{rotl,rotr}{qi,hi,si}3_1_one_bit
        and *{rotl,rotr}di3_1_one_bit_rex64. Macroize insn from
        *{rotl,rotr}{qi,hi,si}3_1 and *{rotl,rotr}di3_1_rex64 using any_rotate
        code iterator and SWI mode iterator.
        (*<rotate_insn>si3_1_zext): Merge with *{rotl,rotr}si3_1_one_bit_zext.
        Macroize insn from {rotl,rotr}si3_1_zext using any_rotate
        code iterator.
        (*<rotate_insn>qi3_1_slp): Merge with *{rotl,rotr}qi3_1_one_bit_slp.
        Macroize insn from {rotl,rotr}qi3_1_slp using any_rotate code iterator.
        (bswap rotatert splitter): Add splitter.
        (bswap splitter): Macroize splitter using any_rotate code iterator.
        Add insn predicate to split only for TARGET_USE_XCHGB or when
        optimizing function for size.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (emit_move_sequence): Remove use of
        deleted variable flag_argument_noalias.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc: Removed *-*-solaris2.7* from list of obsolete
        configurations.
        Add to unsupported targets list.
        * configure.ac (gcc_cv_as_tls): Removed i[34567]86-*-solaris2.[567]*,
        sparc*-sun-solaris2.[567]* from target lists.
        * configure: Regenerate.
        * doc/install.texi (Specific, *-*-solaris2*): Document Solaris 7
        removal.
        Remove Solaris 7 patch references.
        (Specific, sparc-sun-solaris2.7): Removed.
        (sparc-sun-solaris2*): Update Solaris 7 example.
        (sparc64-*-solaris2*): Likewise.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.build (alpha*-dec-osf4*): Remove.
        * config.gcc: Remove alpha*-dec-osf4*, alpha-dec-osf5.0* from list
        of obsolete configurations.
        (alpha*-dec-osf[45]*): Remove alpha*-dec-osf4*, alpha-dec-osf5.0*
        support.
        * config/alpha/t-osf4: Renamed to ...
        * config/alpha/t-osf5: ... this.
        * config/alpha/osf.h: Renamed to ...
        * config/alpha/osf5.h: ... this.
        Merged old osf5.h contents.
        Update comments.
        (ASM_SPEC): Use ASM_OLDAS_SPEC directly.
        (EXTRA_SPECS): Removed.
        * doc/install.texi (Specific, alpha*-dec-osf5.1): Renamed to
        reflect removal of Tru64 UNIX V4.0/V5.0 support.
        Document that.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/contrib.texi (Contributors, Rainer Orth): Update.

2010-04-12  Kai Tietz  <kai.tietz@onevision.com>

        PR/43702
        * config/i386/i386.c (x86_this_parameter): Handle aggregate for
        __thiscall convention.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (hppa_legitimize_address): Remove unused variable
        orig_base.
        * config/pa/pa.md (call, call_value): Remove unused variable call_insn.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * function.c (assign_parms_initialize_all): Add unused attribute
        to fntype.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * gsstruct.def (GSS_CALL): New.
        * gimple.def (GIMPLE_CALL): Change to GSS_CALL.
        * gimple.h: Include tree-ssa-alias.h.
        (struct gimple_statement_call): New.
        (union gimple_statement_struct_d): Add gimple_call member.
        (gimple_call_reset_alias_info): Declare.
        (gimple_call_use_set): New function.
        (gimple_call_clobber_set): Likewise.
        * Makefile.in (GIMPLE_H): Add tree-ssa-alias.h.
        * gimple.c (gimple_call_reset_alias_info): New function.
        (gimple_build_call_1): Call it.
        * lto-streamer-in.c (input_gimple_stmt): Likewise.
        * tree-inline.c (remap_gimple_stmt): Likewise.
        (expand_call_inline): Remove callused handling.
        * cfgexpand.c (update_alias_info_with_stack_vars): Likewise.
        * tree-dfa.c (dump_variable): Likewise.
        * tree-parloops.c (parallelize_loops): Likewise.
        * tree-ssa.c (init_tree_ssa): Likewise.
        (delete_tree_ssa): Likewise.
        * tree-flow-inline.h (is_call_used): Remove.
        * tree-flow.h (struct gimple_df): Remove callused member.
        * tree-nrv.c (dest_safe_for_nrv_p): Adjust predicate.
        * tree-ssa-alias.c (dump_alias_info): Remove callused handling.
        (ref_maybe_used_by_call_p_1): Simplify.
        (call_may_clobber_ref_p_1): Likewise.
        * tree-ssa-structalias.c (compute_points_to_sets): Set
        the call stmt used and clobbered sets.
        * tree-tailcall.c (suitable_for_tail_opt_p): Adjust predicate.
        (find_tail_calls): Verify the tail call.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * ipa.c (cgraph_postorder): Adjust postorder to guarantee
        single-iteration always-inline inlining.
        * ipa-inline.c (cgraph_mark_inline): Do not return anything.
        (cgraph_decide_inlining): Do not handle always-inline specially.
        (try_inline): Remove always-inline cycle detection special case.
        Do not recurse on always-inlines.
        (cgraph_early_inlining): Do not iterate if not optimizing.
        (cgraph_gate_early_inlining): remove.
        (pass_early_inline): Run unconditionally.
        (gate_cgraph_decide_inlining): New function.
        (pass_ipa_inline): Use it.  Do not run the IPA inliner if
        not inlining or optimizing.
        (cgraph_decide_inlining_of_small_functions): Also consider
        always-inline functions.
        (cgraph_default_inline_p): Return true for nodes which should
        disregard inline limits.
        (estimate_function_body_sizes): Assume zero size and time for
        nodes which are marked as disregarding inline limits.
        (cgraph_decide_recursive_inlining): Do not perform recursive
        inlining on always-inline nodes.

2010-04-12  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43699
        * c-typeck.c (c_process_expr_stmt): Call mark_exp_read even
        for exprs satisfying handled_component_p.

2010-04-12  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (categorize_ctor_elements_1): Properly count sub-elements of
        non-constant aggregate elements.

        * gimplify.c (gimplify_init_constructor): Do not pre-evaluate if this
        is a real initialization.

2010-04-12  Shujing Zhao  <pearly.zhao@oracle.com>

        PR c/36774
        * c-decl.c (start_function): Move forward check for nested function.

2010-04-11  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh-protos.h (sh_legitimize_reload_address): Declare.
        * config/sh/sh.c: Include reload.h.
        (sh_legitimize_reload_address): New.
        * config/sh/sh.h (LEGITIMIZE_RELOAD_ADDRESS): Use
        sh_legitimize_reload_address.

2010-04-11  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/sh/sh.md (*movqi_pop): New insn pattern.
        * config/sh/predicates.md (sh_no_delay_pop_operand): New predicate.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_shiftrt): New code iterator.
        (shiftrt_insn): New code attribute.
        (shiftrt): Ditto.
        (<shiftrt_insn><mode>3): Macroize expander from {ashr,lshr}<mode>3
        using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword): Macroize insn_and_split from
        *{ashr,lshr}<mode>3_doubleword using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword peephole2): Macroize peephole2
        pattern from corresponding peephole2 patterns.
        (*<shiftrt_insn><mode>3_1): Macroize insn from *{ashr,lshr}<mode>3_1
        using any_shiftrt code iterator.
        (*<shiftrt_insn>si3_1_zext): Ditto from *{ashr,lshr}si3_1_zext.
        (*<shiftrt_insn>qi3_1_slp): Ditto from *{ashr,lshr}qi3_1_slp.
        (*<shiftrt_insn><mode>3_cmp): Ditto from *{ashr,lshr}<mode>3_cmp.
        (*<shiftrt_insn><mode>3_cmp_zext): Ditto from
        *{ashr,lshr}<mode>3_cmp_zext.
        (*<shiftrt_insn><mode>3_cconly): Ditto from *{ashr,lshr}<mode>3_cconly.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashr<mode>3_cconly): Fix wrong mode of
        scratch register.
        (*lshr<mode>3_cconly): Ditto.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (lshr<mode>3): Macroize expander from
        lshr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*lshr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *lshr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*lshr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (*lshr<mode>3_1): Merge with *lshr{qi,hi,si}3_1_one_bit and
        *lshrdi3_1_one_bit_rex64. Macroize insn from *lshr{qi,hi,si}3_1
        and *lshrdi3_1_rex64 using SWI mode iterator.
        (*lshrsi3_1_zext): Merge with *lshrsi3_1_one_bit_zext.
        (*lshrqi3_1_slp): Merge with *lshrqi3_1_one_bit_slp.
        (*lshr<mode>3_cmp): Merge with *lshr{qi,hi,si}3_one_bit_cmp and
        *lshrdi3_one_bit_cmp_rex64. Macroize insn from *lshr{qi,hi,si}3_cmp
        and *lshrdi3_cmp_rex64 using SWI mode iterator.
        (*lshrsi3_cmp_zext): Merge with *lshrsi3_cmp_one_bit_zext.
        (*lshr<mode>3_cconly): Merge with *lshr{qi,hi,si}3_one_bit_cconly and
        *lshrdi3_one_bit_cconly_rex64. Macroize insn from
        *lshr{qi,hi,si}3_cconly and *lshrdi3_cconly_rex64 using
        SWI mode iterator.

2010-04-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (ashr<mode>3): Macroize expander from
        ashr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*ashr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (ashrdi3_cvt): Rename from ashrdi3_63_rex64.
        (ashrsi3_cvt): Rename from ashrsi3_31.
        (*ashrsi3_cvt_zext): Rename from *ashrsi3_31_zext.
        (x86_shift<mode>_adj_3): Macroize expander from x86_shift_adj_3
        and x86_64_shift_adj_3 using SWI48 mode iterator.
        (*ashr<mode>3_1): Merge with *ashr{qi,hi,si}3_1_one_bit and
        *ashrdi3_1_one_bit_rex64. Macroize insn from *ashr{qi,hi,si}3_1
        and *ashrdi3_1_rex64 using SWI mode iterator.
        (*ashrsi3_1_zext): Merge with *ashrsi3_1_one_bit_zext.
        (*ashrqi3_1_slp): Merge with *ashrqi3_1_one_bit_slp.
        (*ashr<mode>3_cmp): Merge with *ashr{qi,hi,si}3_one_bit_cmp and
        *ashrdi3_one_bit_cmp_rex64. Macroize insn from *ashr{qi,hi,si}3_cmp
        and *ashrdi3_cmp_rex64 using SWI mode iterator.
        (*ashrsi3_cmp_zext): Merge with *ashrsi3_cmp_one_bit_zext.
        (*ashr<mode>3_cconly): Merge with *ashr{qi,hi,si}3_one_bit_cconly and
        *ashrdi3_one_bit_cconly_rex64. Macroize insn from
        *ashr{qi,hi,si}3_cconly and *ashrdi3_cconly_rex64 using
        SWI mode iterator.
        (sign_extend splitters): Update for renamed ashr{di,si}3_cvt patterns.
        * config/i386/i386.c (ix86_split_ashr): Update for renamed
        x86_shift<mode>_adj_3 expanders.

2010-04-10  Wei Guozhi  <carrot@google.com>

        PR target/42601
        * config/arm/arm.c (arm_pic_static_addr): New function.
        (legitimize_pic_address): Call arm_pic_static_addr when it detects
        a static symbol.
        (arm_output_addr_const_extra): Output expression for new pattern.
        * config/arm/arm.md (UNSPEC_SYMBOL_OFFSET): New unspec symbol.

2010-04-10  Bernd Schmidt  <bernds@codesourcery.com>

        * ira-costs.c (record_reg_classes): Ignore alternatives that are
        not enabled.

        * Makefile.in (web.o): Depend on insn-config.h and $(RECOG_H).
        * web.c: Include "insn-config.h" and "recog.h".
        (union_match_dups): New function.
        (web_main): Call it.
        (union_defs): Don't try to recognize match_dups.

        * reload1.c (eliminate_regs_in_insn): Don't restore an operand
        if doing so would replace the entire pattern.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43707
        PR target/43709
        * config/i386/i386.md (*ashl<mode>3_doubleword): Split to insn
        and splitter pattern.  Change splitter operand 1 predicate to
        nonmemory_operand.

2010-04-09  Martin Jambor  <mjambor@suse.cz>

        * ipa-cp.c (ipcp_lats_are_equal): Return true also if the two
        lattices are addresses of CONST_DECLs with the same initial value.
        (ipcp_print_all_lattices): Print values of CONST_DECLs.
        * ipa-prop.c (ipa_print_node_jump_functions): Likewise.

2010-04-09  Eric Botcazou  <ebotcazou@adacore.com>
            Bernd Schmidt  <bernds@codesourcery.com>

        * loop-invariant.c (replace_uses): New static function.
        (move_invariant_reg): Use it to ensure we can replace the uses.

2010-04-09  Hariharan Sandanagobalane  <hariharan@picochip.com>

        * config/picochip/picochip.c (picochip_rtx_costs): Use correct
        function template.
        (picochip_override_options): Enable section anchors only above -O1.
        (picochip_reorg): Fixed a couple of build warnings.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (plugin -rdynamic test): Log result.
        * configure: Regenerate.
        * config/sol2.h (LINK_SPEC): Handle -rdynamic.
        (RDYNAMIC_SPEC): Define.
        * config/sol2-gld.h (RDYNAMIC_SPEC): Redefine.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Determine Sun ld version numbers.
        (comdat_group): Restrict GNU ld version checks to gld.
        (comdat_group, *-*-solaris2.1[1-9]*): Enable for Sun ld > 1.1688.
        (enable_comdat): Support --enable-comdat.
        * configure: Regenerate.
        * doc/install.texi (Configuration): Document --enable-comdat.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sparc/sol2-gld.h: Remove SPARC reference.  Rename ...
        * config/sol2-gld.h: ... here.
        * config.gcc (sparc*-*-solaris2*): Reflect this.
        (i[34567]86-*-solaris2*): Use it.

2010-04-09  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/ia64.c (ia64_dfa_new_cycle): Remove unused variable
        setup_clocks_p.
        (final_emit_insn_group_barriers): Remove unused variable prev_insn.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42965
        * diagnostic.c (diagnostic_initialize): Initialize
        some_warnings_are_errors.
        (diagnostic_finish): New.
        (diagnostic_action_after_output): Call it before exiting.
        (diagnostic_report_diagnostic): Do not print message here. Set
        some_warnings_are_errors.
        * diagnostic.h (diagnostic_context): Delete
        issue_warnings_are_errors_message. Add some_warnings_are_errors.
        (diagnostic_finish): Declare.
        * toplev.c (toplev_main): Call it before exit.

2010-04-09  Jason Merrill  <jason@redhat.com>

        PR c++/42623
        * c-common.c (c_sizeof_or_alignof_type): Return error_mark_node
        for incomplete type.

        PR c++/41788
        * stor-layout.c (finalize_record_size): Don't change TYPE_PACKED
        based on a warning flag.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-pretty-print.c (dump_generic_node): Dump TYPE_VECTOR_SUBPARTS.

2010-04-09  Iain Sandoe  <iains@gcc.gnu.org>

        PR bootstrap/43684
        * varasm.c (default_assemble_visibility): Wrap vars that are
        set, but unused, by targets without GAS.
        * config/rs6000/rs6000.c: (paired_emit_vector_compare):
        Remove set, but unused, vars.
        (rs6000_legitimize_tls_address): Likewise.
        (altivec_expand_dst_builtin): Likewise.
        * config/darwin.c (machopic_classify_symbol): Likewise.
        (machopic_indirection_name): Likewise.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (DWI): New mode iterator.
        (S): New mode attribute.
        (shift_operand): Ditto.
        (shift_immediate_operand): Ditto.
        (ashl_input_operand): Ditto.
        (ashl<mode>3): Macroize expander from ashl{qi,hi,si,di,ti}3_1
        using SDWIM mode iterator.
        (*ashl<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashl{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashl<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (x86_shift<mode>_adj_1): Macroize expander from x86_shift_adj_1
        and x86_64_shift_adj_1 using SWI48 mode iterator.
        (x86_shift<mode>_adj_2): Ditto.
        (*ashldi3_1_rex64): Split TYPE_LEA pattern.
        (*ashl<mode>3_1): Macroize insn from *ashlsi3_1 and *ashldi3_1_rex64
        using SWI48 mode iterator.
        (*ashl<mode>3_cmp): Macroize insn from *ashl{qi,hi,si}3_cmp and
        *ashldi3_cmp_rex64 using SWI mode iterator.
        (*ashl<mode>3_cconly): Macroize insn from *ashl{qi,hi,si}3_cconly and
        *ashldi3_cconly_rex64 using SWI mode iterator.
        * config/i386/i386.c (ix86_split_ashl): Update for renamed
        x86_shift<mode>_adj_{1,2}.
        (ix86_split_ashr): Ditto.
        (ix86_split_lshr): Ditto.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * target.h (builtin_conversion): Pass in input and output types.
        * targhooks.c (default_builtin_vectorized_conversion): Adjust.
        * targhooks.h (default_builtin_vectorized_conversion): Likewise.
        * tree-vect-stmts.c (vectorizable_conversion): Adjust.
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_CONVERSION): Adjust.

        * config/i386/i386.c (ix86_vectorize_builtin_conversion): Adjust.
        Handle AVX modes.
        * config/rs6000/rs6000.c (rs6000_builtin_conversion): Adjust.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        PR target/43152
        * config/i386/sse.md (vcond<mode>): Handle AVX modes as well.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.h (struct _stmt_vec_info): Document
        that vectype is the type of the LHS.
        (supportable_widening_operation, supportable_narrowing_operation):
        Get both input and output vector types as arguments.
        (vect_is_simple_use_1): Declare.
        (get_same_sized_vectype): Likewise.
        * tree-vect-loop.c (vect_determine_vectorization_factor):
        Set STMT_VINFO_VECTYPE to the vector type of the def.
        (vectorizable_reduction): Adjust.
        * tree-vect-patterns.c (vect_recog_widen_mult_pattern):
        Adjust.  Specify the output vector type.
        (vect_pattern_recog_1): Adjust.
        * tree-vect-stmts.c (get_same_sized_vectype): New function.
        (vectorizable_call): Adjust.
        (vectorizable_conversion): Likewise.
        (vectorizable_operation): Likewise.
        (vectorizable_type_demotion): Likewise.
        (vectorizable_type_promotion): Likewise.
        (vect_analyze_stmt): Set STMT_VINFO_VECTYPE to the vector type of
        the def.
        (vect_is_simple_use_1): New function.
        (supportable_widening_operation): Get both input and output
        vector types.
        (supportable_narrowing_operation): Likewise.
        * tree-vect-slp.c (vect_schedule_slp_instance): Adjust.

2010-04-09  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/cygming.h (TARGET_OS_CPP_BUILTINS): Add
        __thiscall and _thiscall as predefined macros.
        * config/i386/i386.c (ix86_handle_cconv_attribute): Add
        thiscall attribute handling.
        (ix86_comp_type_attributes): Likewise.
        (ix86_function_regparm): Likewise.
        (ix86_return_pops_args): Likewise.
        (init_cumulative_args): Likewise.
        (find_drap_reg): Likewise.
        (ix86_static_chain): Likewise.
        (x86_this_parameter): Likewise.
        (x86_output_mi_thunk): Likewise.
        (ix86_attribute_table): Add description for thiscall attribute.
        * config/i386/i386.h (ix86_args): Adjust comment for member fastcall.
        * doc/extend.texi: Add documentation for thiscall.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/28584
        * c.opt (Wint-to-pointer-cast): Available in C++.
        * doc/invoke.texi (Wint-to-pointer-cast): Available in C++.

2010-04-08  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (TREE_ADDRESSABLE): Document its effect for function types.
        * calls.c (expand_call): Pass the function type to aggregate_value_p.
        * function.c (aggregate_value_p): Do not honor DECL_BY_REFERENCE on
        the target function of a CALL_EXPR.  Honor TREE_ADDRESSABLE on the
        function type instead.  Reorder and simplify checks.

        * gimplify.c (gimplify_modify_expr_rhs) <WITH_SIZE_EXPR>: New case.

2010-04-08  Jing Yu  <jingyu@google.com>
            Zdenek Dvorak  <ook@ucw.cz>

        PR tree-optimization/42720
        * tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Move one-time
        loop unswitch conditions here from ...
        (tree_unswitch_single_loop): ... here.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix comments and simplify logic.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c (if_convertible_loop_p): Remove unused parameter.
        (tree_if_conversion): Same.  Update call to if_convertible_loop_p.
        (main_tree_if_conversion): Update call to tree_if_conversion.

2010-04-08  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42485
        * doc/invoke.texi (-b,-V): Delete.
        * doc/tm.texi: Do not mention -b.
        * gcc.c (display_help): Delete -b and -V.
        (process_command): Delete -b and -V.
        * gcc.h (DEFAULT_SWITCH_TAKES_ARG): Delete -b and -V.

2010-04-08  Christian Borntraeger  <borntraeger@de.ibm.com>
            Wolfgang Gellerich  <gellerich@de.ibm.com>

        Implement target hook for loop unrolling
        * target.h (loop_unroll_adjust): Add a new target hook function.
        * target-def.h (TARGET_LOOP_UNROLL_ADJUST): Likewise.
        * doc/tm.texi (TARGET_LOOP_UNROLL_ADJUST): Document it.
        * config/s390/s390.c (TARGET_LOOP_UNROLL_ADJUST): Define it.
        (s390_loop_unroll_adjust): Implement the new target hook for s390.
        * loop-unroll.c (decide_unroll_runtime_iterations): Call loop unroll
        target hook.
        (decide_unroll_stupid): Likewise.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/43643
        * config/i386/gmon-sol2.c [__x86_64__]: Properly restore %rcx.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, i?86-*-solaris2.10): Fix grammar.
        (Specific, *-*-solaris2*): Likewise.
        Don't prefer Sun as over GNU as.

2010-04-08  Wolfgang Gellerich  <gellerich@de.ibm.com>

        * config/s390/s390.c (override_options): Adjust the z10
          defaults for max-unroll-times, max-completely-peeled-insns
          and max-completely-peel-times.

2010-04-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_expand_movmem): Issue prefetch
        instructions for z10.
        (s390_expand_setmem): Likewise.
        (s390_expand_cmpmem): Likewise.

2010-04-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43679
        * tree-ssa-pre.c (eliminate): Only propagate copies.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43681
        * expr.c (block_move_libcall_safe_for_call_parm): Avoid
        set but not used variable warning.

2010-04-08  Wei Guozhi  <carrot@google.com>

        PR target/41653
        * config/arm/arm.c (thumb1_size_rtx_costs): New function.
        (arm_size_rtx_costs): Call the new function when optimized for size.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43670
        * cfgexpand.c (expand_debug_expr): If for non-NULL offset
        op0 is not a MEM, just return NULL instead of assertion
        failure.
        (discover_nonconstant_array_refs): Don't walk debug stmts.

2010-04-08  Doug Kwan  <dougkwan@google.com>

        * configure.ac: Recognize gold and do not use its version number
        to test ld features.
        * configure: Regenerate.

2010-04-08  Maxim Kuvyrkov  <maxim@codesourcery.com>

        PR middle-end/40815
        * tree-ssa-reassoc.c (broken_up_substracts): Rename to plus_negates.
        (negate_value): Move code to push elements to broken_up_substracts ...
        (eliminate_plus_minus_pair): ... here.  Push operands that have no
        negative pair to plus_negates.
        (repropagate_negates, init_reassoc, fini_reassoc): Update.

2010-04-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/install.texi (Configuration): Move description of
        --enable-lto, --with-libelf*, --enable-gold from Java section to
        general section.

        * doc/generic.texi (Working with declarations)
        (Function Properties, C and C++ Trees): Fix typos.
        * doc/sourcebuild.texi (Top Level): Likewise.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR c/18624
        * tree.h (DECL_READ_P): Define.
        (struct tree_decl_common): Add decl_read_flag.
        * c-decl.c (pop_scope): If TREE_USED but !DECL_READ_P, issue
        a set but not used warning.
        (merge_decls): Merge DECL_READ_P flag.
        (finish_decl, build_compound_literal): Set DECL_READ_P flag.
        (finish_function): Issue -Wunused-but-set-parameter diagnostics.
        * c-common.c (handle_used_attribute, handle_unused_attribute):
        Likewise.
        * c-tree.h (default_function_array_read_conversion, mark_exp_read):
        New prototypes.
        * c-typeck.c (default_function_array_read_conversion, mark_exp_read):
        New functions.
        (default_conversion, c_process_expr_stmt): Call mark_exp_read.
        * c-parser.c (c_parser_initializer, c_parser_expr_no_commas,
        c_parser_binary_expression, c_parser_cast_expression,
        c_parser_expr_list, c_parser_omp_atomic, c_parser_omp_for_loop):
        Call default_function_array_read_conversion instead of
        default_function_array_conversion where needed.
        (c_parser_unary_expression, c_parser_conditional_expression,
        c_parser_postfix_expression_after_primary, c_parser_initelt):
        Likewise.  Call mark_exp_read where needed.
        (c_parser_statement_after_labels, c_parser_asm_operands,
        c_parser_typeof_specifier, c_parser_sizeof_expression,
        c_parser_alignof_expression, c_parser_initval): Call mark_exp_read
        where needed.
        * common.opt (Wunused-but-set-variable, Wunused-but-set-parameter):
        New.
        * toplev.c (warn_unused_but_set_variable): Default to warn_unused.
        (warn_unused_but_set_parameter): Default to warn_unused
        && extra_warnings.
        * doc/invoke.texi: Document -Wunused-but-set-variable and
        -Wunused-but-set-parameter.

        * tree-ssa-pre.c (my_rev_post_order_compute): Remove set but not
        used count variable.
        * genemit.c (gen_expand, gen_split): Avoid set but not used warnings
        when operandN variables aren't used in the body of the expander
        or splitter.
        * tree-outof-ssa.c (FOR_EACH_ELIM_GRAPH_SUCC,
        FOR_EACH_ELIM_GRAPH_PRED): Avoid set but not used warnings.
        * tree-ssa-operands.h (FOR_EACH_SSA_TREE_OPERAND): Likewise.
        * tree-flow.h (FOR_EACH_IMM_USE_FAST, FOR_EACH_IMM_USE_STMT,
        FOR_EACH_IMM_USE_ON_STMT): Likewise.
        * tree.h (FOR_EACH_CONSTRUCTOR_ELT): Likewise.
        * tree.c (PROCESS_ARG): Likewise.

2010-04-07  Simon Baldwin  <simonb@google.com>

        * diagnostic.h (diagnostic_override_option_index): New macro to
        set a diagnostic's option_index.
        * c-tree.h (c_cpp_error): Add warning reason argument.
        * opts.c (_warning_as_error_callback): New.
        (register_warning_as_error_callback): Store callback for
        warnings enabled via enable_warning_as_error.
        (enable_warning_as_error): Call callback, minor code tidy.
        * opts.h (register_warning_as_error_callback): Declare.
        * c-opts.c (warning_as_error_callback): New, set cpp_opts flag in
        response to -Werror=.
        (c_common_init_options): Register warning_as_error_callback in opts.c.
        * common.opt: Add -Wno-cpp option.
        * c-common.c (struct reason_option_codes_t): Map cpp warning
        reason codes to gcc option indexes.
        * (c_option_controlling_cpp_error): New function, lookup the gcc
        option index for a cpp warning reason code.
        * (c_cpp_error): Add warning reason argument, call
        c_option_controlling_cpp_error for diagnostic_override_option_index.
        * doc/invoke.texi: Document -Wno-cpp.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * ipa-reference.c (mark_load): Use get_base_address.
        (mark_store): Likewise.

        * tree-ssa-ccp.c (gimplify_and_update_call_from_tree): Avoid
        inserting GIMPLE_NOPs into the IL.
        * tree-ssa-structalias.c (get_constraint_for_component_ref):
        Explicitly strip handled components and indirect references.

        * fold-const.c (fold_unary_loc): Do not strip qualifiers when
        folding address expressions.
        * gimple.c (gimple_ior_addresses_taken_1): Use get_base_address.
        * tree-ssa-alias.c (decl_refs_may_alias_p): Do not use
        operand_equal_p to compare decls.
        (ptr_deref_may_alias_decl_p): Likewise.
        * tree-ssa-operands.c (get_asm_expr_operands): Simplify
        * tree-ssa-forwprop.c (forward_propagate_into_gimple_cond):
        Handle reversed comparison ops.
        * tree-sra.c (asm_visit_addr): Use get_base_address.
        * ipa-prop.c (visit_store_addr_for_mod_analysis): Use get_base_address.
        * ipa-reference.c (mark_address): Use get_base_address.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-forwprop.c (forward_propagate_addr_expr):
        Propagate constants everywhere.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43516
        * tree.c (MAX_INT_CACHED_PREC): Define.
        (nonstandard_integer_type_cache): New array.
        (build_nonstandard_integer_type): Cache results for precision
        <= MAX_INT_CACHED_PREC.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * doc/invoke.texi (-fargument-alias, -fargument-noalias,
        -fargument-noalias-global, -fargument-noalias-anything): Remove.
        * common.opt: Likewise.
        * tree-ssa-structalias.c (intra_create_variable_infos): Adjust comment.
        * alias.c (base_alias_check): Remove flag_argument_noalias handling.
        (nonoverlapping_memrefs_p): Likewise.
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Likewise.
        * opts.c (common_handle_option): Handle OPT_fargument_alias,
        OPT_fargument_noalias, OPT_fargument_noalias_anything and
        OPT_fargument_noalias_global for backward compatibility.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43270
        * tree-vrp.c (check_array_ref): Fix flexible array member detection.
        * tree-ssa-sccvn.h (fully_constant_vn_reference_p): Declare.
        * tree-ssa-pre.c (phi_translate_1): Adjust.
        (fully_constant_expression): Split out vn_reference handling to ...
        * tree-ssa-sccvn.c (fully_constant_vn_reference_p): ... here.
        Fold reads from constant strings.
        (vn_reference_lookup): Handle fully constant references.
        (vn_reference_lookup_pieces): Likewise.
        * Makefile.in (expmed.o-warn): Add -Wno-error.

2010-04-07  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (find_param_candidates): Allow scalar va_list types.

2010-04-07  Iain Sandoe  <iains@gcc.gnu.org>

        PR driver/41594
        * gcc.c: Add -static-libstdc++ to list of recognized options.

2010-04-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (i[34567]86-*-solaris2*): Default with_tune_32 to generic.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * expr.c (expand_expr_real_1): For TARGET_MEM_REFs with pointer
        bases build simple mem attributes to retain points-to information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * alias.c (ao_ref_from_mem): Without MEM_OFFSET or MEM_SIZE
        preserve points-to related information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Do not
        discard plain indirect references.
        * fold-const.c (operand_equal_p): Guard against NULL_TREE type.
        * tree.c (tree_nop_conversion): Likewise.

2010-04-07  Dodji Seketeli  <dodji@redhat.com>

        PR debug/43628
        * dwarf2out.c (modified_type_die): Ignore artificial typedefs.

2010-04-06  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/i386.c (ix86_handle_cconv_attribute): Ignore
        calling convention attributes on METHOD_TYPEs for w64 ABI, too.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Sort static functions in topological order.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (max_signed_precision_type): Use
        lang_hooks.types.type_for_size instead of
        build_nonstandard_integer_type.
        When converting an unsigned type to signed, double its precision.
        (gcc_type_for_interval): Use lang_hooks.types.type_for_size.
        (gcc_type_for_iv_of_clast_loop): Call max_signed_precision_type.
        (graphite_create_new_loop_guard): When ub + 1 wraps around,
        use lb <= ub.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (graphite_create_new_loop_guard): Use
        POINTER_PLUS_EXPR for pointer types.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * Makefile.in (graphite-clast-to-gimple.o): Depends on langhooks.h.
        * graphite-clast-to-gimple.c: Include langhooks.h.
        (max_signed_precision_type): New.
        (max_precision_type): Takes two types as arguments.
        (precision_for_value): New.
        (precision_for_interval): New.
        (gcc_type_for_interval): New.
        (gcc_type_for_value): New.
        (gcc_type_for_clast_term): New.
        (gcc_type_for_clast_red): New.
        (gcc_type_for_clast_bin): New.
        (gcc_type_for_clast_expr): Split up into several functions.
        (gcc_type_for_clast_eq): Rewritten.
        (compute_bounds_for_level): New.
        (compute_type_for_level_1): New.
        (compute_type_for_level): New.
        (gcc_type_for_cloog_iv): Removed.
        (gcc_type_for_iv_of_clast_loop): Rewritten.
        (graphite_create_new_loop): Compute the lower and upper bound types
        with gcc_type_for_clast_expr.
        (graphite_create_new_loop_guard): Same.
        (find_cloog_iv_in_expr): Removed.
        (compute_cloog_iv_types_1): Removed.
        (compute_cloog_iv_types): Removed.
        (gloog): Do not call compute_cloog_iv_types.
        * graphite-sese-to-poly.c (new_gimple_bb): Do not initialize
        GBB_CLOOG_IV_TYPES.
        (free_data_refs_aux): Do not free GBB_CLOOG_IV_TYPES.
        * sese.h (struct gimple_bb): Removed field cloog_iv_types.
        (GBB_CLOOG_IV_TYPES): Removed.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Assert that
        gimple_phi_num_args of the loop close SSA phi node is equal to 1.
        (detect_commutative_reduction): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (graphite_verify): Remove redundant
        call to verify_ssa.  Invoke verify_loop_closed_ssa with an extra
        argument.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa_form): Same.
        * graphite-sese-to-poly.c (rewrite_reductions_out_of_ssa): Same.
        (rewrite_commutative_reductions_out_of_ssa): Same.
        * passes.c (execute_function_todo): Call verify_ssa for every pass
        in the LNO.  Invoke verify_loop_closed_ssa with an extra argument.
        * tree-flow.h (verify_loop_closed_ssa): Update declaration.
        * tree-parloops.c (parallelize_loops): Invoke verify_loop_closed_ssa
        with an extra argument.
        * tree-ssa-loop-manip.c (check_loop_closed_ssa_stmt): Same.  Call
        verify_ssa only when the extra argument is true.
        (gimple_duplicate_loop_to_header_edge): Invoke verify_loop_closed_ssa
        with an extra argument.
        (tree_transform_and_unroll_loop): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * passes.c (execute_function_todo): Call verify_loop_closed_ssa
        for all the passes of the LNO having LOOP_CLOSED_SSA.
        * tree-if-conv.c (pass_if_conversion): Remove TODO_verify_loops.
        * tree-loop-distribution.c (pass_loop_distribution): Same.
        * tree-pass.h (TODO_verify_loops): Removed.
        * tree-ssa-loop.c (pass_tree_loop_init): Same.
        (pass_lim): Same.
        (pass_tree_unswitch): Same.
        (pass_predcom): Same.
        (pass_vectorize): Same.
        (pass_linear_transform): Same.
        (pass_graphite_transforms): Same.
        (pass_iv_canon): Same.
        (pass_complete_unroll): Same.
        (pass_complete_unrolli): Same.
        (pass_parallelize_loops): Same.
        (pass_loop_prefetch): Same.
        (pass_iv_optimize): Same.

2010-04-06  Changpeng Fang  <changpeng.fang@amd.com>

        PR middle-end/32824
        * passes.c (init_optimization_passes): Move pass_lim before
        pass_copy_prop and pass_dce_loop.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        PR target/43667
        * config/i386/i386.c (bdesc_multi_arg): Use OPTION_MASK_ISA_XOP
        instead of OPTION_MASK_ISA_AVX for __builtin_ia32_vpermil2p*.
        (ix86_expand_args_builtin): Use V*_FTYPE_* enum codes instead of
        MULTI_* defines for 4 argument vpermil2p* builtins.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (x86_maybe_negate_const_int): Declare.
        * config/i386/i386.c (x86_maybe_negate_const_int): New.
        (x86_output_mi_thunk): Use x86_maybe_negate_const_int.
        * config/i386/i386.md (*add<mode>_1, *addsi_1_zext, *addhi_1,
        *addhi_1_lea, *addqi_1, *addqi_1_lea, *addqi_1_slp, *add<mode>_2,
        *addsi_2_zext, *addhi_2, *addqi_2, *add<mode>_3, *addsi_3_zext,
        *addhi_3, *addqi_3,*add<mode>_5, *addhi_5, *addqi_5):
        Use x86_maybe_negate_const_int to output insn mnemonic.
        (*adddi_4, *addsi_4, *addhi_4, *addqi_4): Ditto.  Remove overflow
        check from instruction predicate.  Update comments.
        * config/i386/sync.md (sync_add<mode>): Use
        x86_maybe_negate_const_int to output insn mnemonic.

2010-04-06  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/42906
        * tree-ssa-dce.c (mark_control_dependent_edges_necessary): Add
        IGNORE_SELF argument.  Set visited_control_parents for fully
        processed BBs.
        (find_obviously_necessary_stmts): Update call of
        mark_control_dependent_edges_necessary.
        (propagate_necessity): Likewise.  Handle PHI edges more curefully.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md: Remove comment about 'e' and 'E'
        operand modifier.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43627
        * tree-vrp.c (extract_range_from_unary_expr): Widenings
        of [1, +INF(OVF)] go to [1, +INF(OVF)] of the wider type,
        not varying.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        * BASE-VER: Change to 4.6.0.

        PR target/43638
        * config/i386/i386.c (print_operand): Remove 'e' and 'E' code
        handling.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43661
        * fold-const.c (fold_comparison): Handle X * 0 CMP 0.

2010-04-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/invoke.texi (Optimize Options): Document that LTO
        won't remove object access purely due to incompatible
        declarations.

2010-04-04  Matthias Klose  <doko@ubuntu.com>

        * graphite-sese-to-poly.c (translate_scalar_reduction_to_array):
        Initialize variable.

2010-04-03  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42509
        * alias.c (nonoverlapping_memrefs_p): For spill-slot accesses
        require a non-NULL MEM_OFFSET.

2010-04-02  Steven Bosscher  <steven@gcc.gnu.org>

        * ada/gcc-interface/Make-lang.in, alias.c, attribs.c, auto-inc-dec.c,
        basic-block.h, bb-reorder.c, calls.c, c-common.c, cgraph.h,
        collect2.h, config/alpha/alpha.c, config/alpha/alpha.md,
        config/alpha/predicates.md, config/arm/arm.md,
        config/arm/lib1funcs.asm, config/arm/neon-schedgen.ml,
        config/avr/avr.c, config/avr/avr.md, config/bfin/bfin.c,
        config/darwin9.h, config/darwin.c, config/darwin.h,
        config/h8300/h8300.c, config/i386/cpuid.h, config/i386/cygming.h,
        config/i386/cygwin.h, config/i386/mingw32.h, config/i386/msformat-c.c,
        config/i386/sol2-10.h, config/i386/xopintrin.h, config/ia64/ia64.c,
        config/ia64/ia64.md, config/ia64/sync.md, config/mep/mep.c,
        config/mips/mips.md, config/mn10300/mn10300.c,
        config/mn10300/mn10300.h, config/pa/pa.c, config/pa/pa.md,
        config/rs6000/aix.h, config/rs6000/dfp.md,
        config/rs6000/rs6000-builtin.def, config/rs6000/rs6000-c.c,
        config/rs6000/vector.md, config/rtems.h, config/rx/rx.md,
        config/s390/s390.md, config/sol2-c.c, config/sparc/sol2-bi.h,
        config/sparc/sol2-gas.h, config/sparc/sparc.h, config/sparc/sparc.md,
        config/sparc/sparc-protos.h, config/spu/spu.c, config/spu/spu-c.c,
    &nb