2010-04-20 Richard Guenther <rguenther@suse.de>

[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2010-04-20  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (do_structure_copy): Properly handle
        DEREF.
        (dump_sa_points_to_info): Remove asserts.
        (init_base_vars): nothing_id isn't an escape point nor does it
        have pointers.

2010-04-20  Jakub Jelinek  <jakub@redhat.com>

        * tree.h (TYPE_REF_IS_RVALUE): Define.
        * dwarf2out.c (attr_checksum_ordered, is_type_die, is_comdat_die,
        should_move_die_to_comdat, prune_unused_types_walk): Handle
        DW_TAG_rvalue_reference_type like DW_TAG_reference_type.
        (modified_type_die, gen_reference_type_die): Emit
        DW_TAG_rvalue_reference_type instead of DW_TAG_reference_type
        if TYPE_REF_IS_RVALUE and -gdwarf-4.

2010-04-20  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR target/43635
        * config/s390/s390.c (s390_emit_call): Turn direct into indirect
        calls for -fpic -m31 if they have been sibcall optimized.

2010-04-19  James E. Wilson  <wilson@codesourcery.com>

        PR rtl-optimization/43520
        * config/ia64/ia64.h (FIXED_REGISTERS, CALL_USED_REGISTERS): Make
        ar.lc fixed and call-used.

        * config/ia64/ia64.c (TARGET_INVALID_WITHIN_DOLOOP): Define.

2010-04-19  Jan Hubicka  <jh@suse.cz>

        * opts.c (decode_options): Disable whpr incompatible passes.
        * lto/lto.c (lto_1_to_1_map): Skip clones.
        (read_cgraph_and_symbols): Do not mark everything as needed.
        (do_whole_program_analysis): Do map only after optimizing;
        set proper cgraph_state; use passmanager.

2010-04-19  DJ Delorie  <dj@redhat.com>

        * cfgexpand.c (expand_debug_expr): Check for mismatched modes in
        POINTER_PLUS_EXPR and fix them.

2010-04-19  Eric B. Weddington  <eric.weddington@atmel.com>

        * config/avr/avr-devices.c (avr_mcu_types): Add support for new
        devices atmega644pa, attiny2313a, attiny24a, attiny261a, attiny4313,
        attiny44a, attiny861a, atmega16a, atmega168a, atmega164a, atmega165a,
        atmega169a, atmega169pa, atmega16hva2, atmega324a, atmega324pa,
        atmega325a, atmega3250a, atmega328, atmega329a, atmega329pa,
        atmega3290a, atmega48a, atmega644a, atmega645a, atmega645p,
        atmega6450a, atmega6450p, atmega649a, atmega649p, atmega6490a,
        atmega6490p, atmega64hve, atmega88a, atmega88pa, attiny461a, attiny84a,
        m3000. Remove support for devices atmega8m1, atmega8c1, atmega16c1,
        atmega4hvd, atmega8hvd, attiny327, m3000f, m3000s, m3001b.
        * config/avr/t-avr.c (MULTILIB_MATCHES): Same.

2010-04-19  Eric Botcazou  <ebotcazou@adacore.com>

        * ifcvt.c (noce_try_cmove_arith): Fix long lines.
        (check_cond_move_block): Likewise.
        (cond_move_process_if_block): Likewise.
        (noce_find_if_block): Improve formatting.
        (find_if_header): Pass 0 to memset and tweak conditions.
        (cond_exec_find_if_block): Fix long lines and tweak conditions.

2010-04-19  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (lower_bound_default): For DW_LANG_Python return
        0 for -gdwarf-4.

        PR middle-end/43337
        * tree-nested.c (convert_nonlocal_omp_clauses): OMP_CLAUSE_PRIVATE
        with non-local decl doesn't need chain.

2010-04-19  Vladimir Makarov  <vmakarov@redhat.com>

        * ira-color.c (allocno_reload_assign): Avoid accumulating
        reload registers in ALLOCNO_TOTAL_CONFLICT_HARD_REGS.

2010-04-19  Martin Jambor  <mjambor@suse.cz>

        * gimple.h (create_tmp_reg): Declare.
        * gimplify.c (create_tmp_reg): New function.
        (gimplify_return_expr): Use create_tmp_reg.
        (gimplify_omp_atomic): Likewise.
        (gimple_regimplify_operands): Likewise.
        * tree-dfa.c (make_rename_temp): Likewise.
        * tree-predcom.c (predcom_tmp_var): Likewise.
        (reassociate_to_the_same_stmt): Likewise.
        * tree-sra.c (replace_uses_with_default_def_ssa_name): Likewise.
        (get_replaced_param_substitute): Likewise.
        * tree-ssa-phiprop.c (phiprop_insert_phi): Likewise.
        * tree-ssa-phiopt.c (cond_store_replacement): Likewise.
        * tree-ssa-pre.c (get_representative_for): Likewise.
        (create_expression_by_pieces): Likewise.
        * tree-tailcall.c (adjust_return_value_with_ops): Likewise.
        (create_tailcall_accumulator): Likewise.

2010-04-19  Martin Jambor  <mjambor@suse.cz>

        * cgraphunit.c (cgraph_redirect_edge_call_stmt_to_callee): Update
        new_stmt.
        (cgraph_materialize_all_clones): Assert !need_ssa_update_p.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43796
        * tree-vrp.c (adjust_range_with_scev): Lookup init and step
        from SCEV in the lattice.
        (vrp_visit_phi_node): Dump change.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        * configure.ac: Fix quoting around elf_getshstrndx ABI check.
        * configure: Re-generated.

2010-04-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43783
        * tree-ssa-pre.c (create_component_ref_by_pieces_1): Drop
        constant ARRAY_REF operands two and three if possible.

2010-04-19  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43766
        * config/i386/i386.c (ix86_decompose_address): Handle ASHIFT addends.

2010-04-19  Jie Zhang  <jie@codesourcery.com>

        PR target/43662
        * reginfo.c (reinit_regs): Set caller_save_initialized_p to false.

2010-04-19 Ira Rosen <irar@il.ibm.com>

        PR tree-optimization/37027
        * tree-vectorizer.h (struct _loop_vec_info): Add new field reductions 
        and macro to access it.
        (vectorizable_reduction): Add argument.
        (vect_get_slp_defs): Likewise.
        * tree-vect-loop.c (vect_analyze_scalar_cycles_1): Collect reduction
        statements for possible use in SLP.
        (new_loop_vec_info): Initialize LOOP_VINFO_REDUCTIONS.
        (destroy_loop_vec_info): Free LOOP_VINFO_REDUCTIONS.
        (vect_create_epilog_for_reduction): Handle SLP. Modify documentation,
        add new argument.
        (vectorizable_reduction): Likewise.
        * tree-vect-stmts.c (vect_get_vec_defs): Update call to 
        vect_get_slp_defs.
        (vectorizable_type_demotion, vectorizable_type_promotion,
        vectorizable_store): Likewise.
        (vect_analyze_stmt): Update call to vectorizable_reduction.
        (vect_transform_stmt): Likewise.
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Handle reduction.
        (vect_build_slp_tree): Fix indentation. Check that there are no loads
        from different interleaving chains in same node.
        (vect_slp_rearrange_stmts): New function.
        (vect_supported_load_permutation_p): Allow load permutations for 
        reductions. Call vect_slp_rearrange_stmts() to rearrange statements
        inside SLP nodes if necessary.
        (vect_analyze_slp_instance): Handle reductions.
        (vect_analyze_slp): Try to build SLP instances originating from groups
        of reductions.
        (vect_detect_hybrid_slp_stmts): Skip reduction statements.
        (vect_get_constant_vectors): Create initial vectors for reductions
        according to reduction code. Add new argument.
        (vect_get_slp_defs): Add new argument, pass it to 
        vect_get_constant_vectors.
        (vect_schedule_slp_instance): Remove SLP tree root statements.

2010-04-19  Jakub Jelinek  <jakub@redhat.com>

        * tree.h (ENUM_IS_SCOPED): Define.
        * dwarf2out.c (gen_enumeration_type_die): Add DW_AT_enum_class
        for ENUM_IS_SCOPED enums.

2010-04-18  Eric Botcazou  <ebotcazou@adacore.com>

        * fold-const.c (fold_comparison): Use ssizetype.
        * gimple-fold.c (maybe_fold_offset_to_array_ref): Likewise.
        * ipa-prop.c (ipa_modify_call_arguments): Use sizetype.
        * tree-loop-distribution.c (build_size_arg_loc): Likewise.
        * tree-object-size.c (compute_object_sizes): Use size_type_node.

        * tree.h (initialize_sizetypes): Remove parameter.
        (build_common_tree_nodes): Remove second parameter.
        * stor-layout.c (initialize_sizetypes): Remove parameter.
        Always create an unsigned type.
        (set_sizetype): Assert that the passed type is unsigned and simplify.
        * tree.c (build_common_tree_nodes): Remove second parameter.
        Adjust call to initialize_sizetypes.
        * c-decl.c (c_init_decl_processing): Remove second argument in call to
        build_common_tree_nodes.

2010-04-18  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (main): Search for liblto_plugin.so with mode R_OK.

2010-04-18 Ira Rosen <irar@il.ibm.com> 

        PR tree-optimization/43771
        * tree-vect-slp.c (vect_supported_load_permutation_p): Check that
        load permutation doesn't have gaps.

2010-04-18  Jan Hubicka  <jh@suse.cz>

        * i386.md (UNSPEC_SSE_PROLOGUE_SAVE_LOW): New.
        (sse_prologue_save_insn expander): Use new pattern.
        (sse_prologue_save_insn1): New pattern and splitter.
        (sse_prologue_save_insn): Update to deal also with 64bit aligned
        blocks.
        * i386.c (setup_incoming_varargs_64): Do not compute jump
        destination here.
        (ix86_gimplify_va_arg): Update alignment needed.
        (ix86_local_alignment): Do not align all local arrays to 128bit.

2010-04-17  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (cgraph_early_inlining): Handle flattening too.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm.md (negdi2): Remove redundant code to force values into a
        register.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm/bpabi.S: Add EABI alignment attributes to objects.
        * arm/bpabi-v6m.S: Likewise.
        * arm/crti.asm: Likewise.
        * arm/crtn.asm: Likewise.
        * arm/lib1funcs.asm: Likewise.
        * arm/libunwind.S: Likewise.

2010-04-17  Richard Earnshaw  <rearnsha@arm.com>

        * arm-protos.h (tune_params): New structure.
        * arm.c (current_tune): New variable.
        (arm_constant_limit): Delete.
        (struct processors): Add pointer to the tune parameters.
        (arm_slowmul_tune): New tuning option.
        (arm_fastmul_tune, arm_xscale_tune, arm_9e_tune): Likewise.
        (all_cores): Adjust to pick up the tuning model.
        (arm_constant_limit): New function.
        (arm_override_options): Select the appropriate tuning model.  Delete
        initialization of arm_const_limit.
        (arm_split_constant): Use the new constant-limit model.
        (arm_rtx_costs): Pick up the current tuning model.
        * arm.md (is_strongarm, is_xscale): Delete.
        * arm-generic.md (load_ldsched_x, load_ldsched): Test explicitly
        for Xscale variant architectures.
        (mult_ldsched_strongarm, mult_ldsched): Similarly for StrongARM.

2010-04-17  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/arm/arm.c (arm_gen_constant): Remove unused variable
        can_shift.
        (arm_rtx_costs_1): Remove unused variable extra_cost.
        (arm_unwind_emit_set): Use variable offset.
        (thumb1_output_casesi): Remove unused variable flags.

2010-04-16  Jeff Law  <law@redhat.com>

        * ira-color.c (ira_reassign_pseudos): Collect and sort all the pseudos
        needing assignment rather than doing a two-phase assignment.  Remove
        unused variable 'm'.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43767
        * alias.c (memrefs_conflict_p): Don't crash if CSELIB_VAL_PTR is NULL.

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * tree-ssa-reassoc.c (struct operand_entry): Add new field ID.
        (next_operand_entry_id): New static variable.
        (sort_by_operand_rank): Stabilize qsort comparator by using unique IDs.
        (add_to_ops_vec): Assigned unique ID to operand entry.
        (struct oecount_s): New field ID.
        (oecount_cmp): Stabilize qsort comparotor by using unique IDs.
        (undistribute_ops_list): Assign unique IDs to oecounts.
        (init_reassoc): reset next_operand_entry_id.

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * config/i386/i386.md (*jcc_bt<mode>): Fix build breakage by adding
        missing left parenthesis.
        
2010-04-16  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*bt<mode>): Macroize insn from *btsi and
        *btdi_rex64 using SWI48 mode iterator.
        (*jcc_bt<mode>): Ditto from *jcc_btsi and *jcc_btdi_rex64.
        (*jcc_bt<mode>_mask): Ditto from *jcc_btsi_mask and
        *jcc_btdi_mask_rex64.

2010-04-16  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (tree_to_double_int): Convert to macro.
        * double-int.c (tree_to_double_int): Remove.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43762
        * dwarf2out.c (add_bound_info): Always call loc_list_from_tree
        with want_address 2 and in case a single element list might be
        possible, call it again with want_address 0.

2010-04-12  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/h8300/h8300.c (print_operand) : Modify case 'V' and
        case 'W' print operands for HI mode.
        * config/h8300/h8300.h (Y0, Y2) : New constraints.
        * config/h8300/h8300.md (bclrqi_msx, bclrhi_msx): New patterns
        (bsetqi_msx, bsethi_msx, bnotqi_msx, bnothi_msx): Likewise.
        * config/h8300/predicate.md (bit_register_indirect_operand): New.

        * config/h8300/h8300.h (OK_FOR_U): Support 'U' constraint for H8300SX.

        * config/h8300/h8300.md (movqi_h8sx, movhi_h8sx, movsi_h8sx, 
        cmphi_h8300hs_znvc, cmpsi, addhi3_h8sx) : Emit instructions in
        #xx:3 and #xx:4 mode.

        * config/h8300/h8300.md (inverted load with HImode dest): Add
        support for H8300SX.

        * config/h8300/predicate.md (bit_operand): Allow immediate values that
        satisfy 'U' constraint.

2010-04-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
        flavor.
        * configure: Regenerate.
        * config.in: Regenerate.
        * doc/install.texi (Prerequisites): Document that Solaris 2 libelf
        works.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * tree.h (struct tree_decl_minimal): Move pt_uid ...
        (struct tree_decl_common): ... here.
        (DECL_PT_UID): Adjust.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43572
        * tree-ssa-alias.h (call_may_clobber_ref_p): Declare.
        * tree-ssa-alias.c (call_may_clobber_ref_p): Export.
        * tree-flow.h (is_call_clobbered): Remove.
        * tree-flow-inline.h (is_call_clobbered): Likewise.
        * tree-dfa.c (dump_variable): Do not dump call clobber state.
        * tree-nrv.c (dest_safe_for_nrv_p): Use the alias oracle.
        (execute_return_slot_opt): Adjust.
        * tree-tailcall.c (suitable_for_tail_opt_p): Remove
        check for call clobbered vars here.
        (find_tail_calls): Move tailcall verification to the
        proper place.

2010-04-16  Diego Novillo  <dnovillo@google.com>

        * doc/invoke.texi: Explain how are unrecognized -Wno- warnings
        handled.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/40603
        * config/arm/arm.md (cbranchqi4): New pattern.
        * config/arm/predicates.md (const0_operand,
        cbranchqi4_comparison_operator): New predicates.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * gimple-pretty-print.c (dump_gimple_phi): Dump alias info.
        (dump_gimple_stmt): Likewise.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        * recog.h (struct recog_data): New field is_operator.
        (struct insn_operand_data): New field is_operator.
        * recog.c (extract_insn): Set recog_data.is_operator.
        * genoutput.c (output_operand_data): Emit code to set the
        is_operator field.
        * reload.c (find_reloads): Use it rather than testing for an
        empty constraint string.

        PR target/41514
        * config/arm/arm.md (cbranchsi4_insn): Renamed from "*cbranchsi4_insn".
        If the previous insn is a cbranchsi4_insn with the same arguments,
        omit the compare instruction.

        * config/arm/arm.md (addsi3_cbranch): If destination is a high
        register, inputs must be low registers and we need a low register
        scratch.  Handle alternative 2 like alternative 3.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        * alias.c (memrefs_conflict_p): If x and y are the same VALUE,
        don't call get_addr on both.  If one expression is a VALUE and
        the other a REG, check VALUE's locs if the REG isn't among them.

2010-04-16  Christian Bruel  <christian.bruel@st.com>

        * config/sh/sh.h (sh_frame_pointer_required): New function.
        * config/sh/sh.h (TARGET_FRAME_POINTER_REQUIRED): New macro.
        (flag_omit_frame_pointer) Set.
        (MASK_ACCUMULATE_OUTGOING_ARGS) Define and Set.
        (rounded_frame_size): Adjust size with outgoing_args_size.
        (sh_set_return_address): Must return from stack pointer.
        * gcc/config/sh/sh.h (CAN_DEBUG_WITHOUT_FP): Define.
        (SUBTARGET_FRAME_POINTER_REQUIRED): Define.
        (ACCUMULATE_OUTGOING_ARGS): Define.
        * doc/invoke.texi (maccumulate-outgoing-args): Document for SH.
        * gcc/config/sh/sh.opt: (maccumulate-outgoing-args): New option.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43471
        * config/sh/sh.c (sh_legitimize_reload_address): Use
        MAYBE_BASE_REGISTER_RTX_P instead of BASE_REGISTER_RTX_P.
        Remove a unneeded check for offset_base.

2010-04-15  H.J. Lu  <hongjiu.lu@intel.com>

        * configure: Regenerated.

2010-04-15  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_call_save_register_used): Switch back
        to HARD_REGNO_NREGS.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * alias.c (alias_set_subset_of): Handle alias-set zero
        child properly.

2010-04-15  Mark Shinwell  <shinwell@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * config/arm/thumb2.md (thumb2_movsi_insn): Split ldr and str
        alternatives according to use of high and low regs.
        * config/arm/vfp.md (thumb2_movsi_vfp): Likewise.
        * config/arm/arm.h (CONDITIONAL_REGISTER_USAGE): Use high regs when
        optimizing for size on Thumb-2.

2010-04-15  Thomas Schwinge  <tschwinge@gnu.org>

        * config.gcc <i[34567]86-*-gnu*>: Handle softfp as for Linux.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (struct variable_info): Add
        is_fn_info flag.
        (new_var_info): Initialize it.
        (dump_constraints): Support printing last added constraints.
        (debug_constraints): Adjust.
        (dump_constraint_graph): Likewise.
        (make_heapvar_for): Check for NULL cfun.
        (get_function_part_constraint): New function.
        (get_fi_for_callee): Likewise.
        (find_func_aliases): Properly implement IPA PTA constraints.
        (process_ipa_clobber): New function.
        (find_func_clobbers): Likewise.
        (insert_into_field_list_sorted): Remove.
        (create_function_info_for): Properly allocate vars for IPA mode.
        Do not use insert_into_field_list_sorted.
        (create_variable_info_for): Properly generate constraints for
        global vars in IPA mode.
        (dump_solution_for_var): Always dump the solution.
        (set_uids_in_ptset): Initialize DECL_PT_UID if in ipa-mode.
        (find_what_var_points_to): Adjust.
        (pt_solution_set): Change.
        (pt_solution_ior_into): New function.
        (pt_solution_empty_p): Export.
        (pt_solution_includes_global): Adjust.
        (pt_solution_includes_1): Likewise.
        (pt_solutions_intersect_1): Likewise.
        (dump_sa_points_to_info): Check some invariants.
        (solve_constraints): Move constraint dumping ...
        (compute_points_to_sets): ... here.
        (ipa_pta_execute): ... and here.
        (compute_may_aliases): Do not re-compute points-to info
        locally if IPA info is available.
        (ipa_escaped_pt): New global var.
        (ipa_pta_execute): Properly implement IPA PTA.
        * tree-into-ssa.c (dump_decl_set): Support dumping
        decls not in referenced-vars.
        * tree-flow.h (struct gimple_df): Add ipa_pta flag.
        * tree-ssa-alias.c (ptr_deref_may_alias_decl_p): Adjust.
        (dump_points_to_solution): Likewise.
        * tree-dfa.c (dump_variable): Also dump DECL_PT_UID.
        * tree-inline.c (remap_ssa_name): Copy IPA points-to solution.
        (remap_gimple_stmt): Reset call clobber/use information if
        necessary.
        (copy_decl_to_var): Copy DECL_PT_UID.
        (copy_result_decl_to_var): Likewise.
        * tree.c (make_node_stat): Initialize DECL_PT_UID.
        (copy_node_stat): Copy it.
        * tree.h (DECL_PT_UID): New macro.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.
        (struct tree_decl_minimal): Add pt_uid member.
        * tree-ssa-alias.h (struct pt_solution): Add ipa_escaped flag.
        (pt_solution_empty_p): Declare.
        (pt_solution_set): Adjust.
        (ipa_escaped_pt): Declare.
        * cfgexpand.c (update_alias_info_with_stack_vars): Adjust.
        * gimple-pretty-print.c (pp_points_to_solution): New function.
        (dump_gimple_call): Dump call clobber/use information.
        * tree-dump.c (dump_option_value_in): Add TDF_ALIAS entry.
        * tree-pass.h (TDF_ALIAS): New dump option.
        * tree-pretty-print.c (dump_decl_name): Dump DECL_PT_UID if asked to.
        * doc/invoke.texi (-fipa-pta): Update documentation.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (OBJS-common): Add gimple-fold.o.
        (gimple-fold.o): New rule.
        * tree.h (maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_addition): Move
        prototypes ...
        * gimple.h: ... here.
        * tree-flow.h (fold_stmt, fold_stmt_inplace, get_symbol_constant_value,
        may_propagate_address_into_dereference): Move prototypes ...
        * gimple.h: ... here.
        * tree-ssa-ccp.c (get_symbol_constant_value,
        may_propagate_address_into_dereference, maybe_fold_offset_to_array_ref,
        maybe_fold_offset_to_component_ref, maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_indirect,
        maybe_fold_stmt_addition, maybe_fold_reference, get_maxval_strlen,
        ccp_fold_builtin, fold_gimple_assign, fold_gimple_cond,
        fold_gimple_call, fold_stmt_1, fold_stmt, fold_stmt_inplace,
        gimplify_and_update_call_from_tree): Move ...
        * gimple-fold.c: ... here.  New file.
        (ccp_fold_builtin): Rename to ...
        (gimple_fold_builtin): ... this.
        * tree-ssa-ccp.c (execute_fold_all_builtins): Adjust.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (LOWPART, HIGHPART, BASE, encode, decode,
        fit_double_type, force_fit_type_double, add_double_with_sign,
        neg_double, mul_double_with_sign, lshift_double, rshift_double,
        lrotate_double, rrotate_double, div_and_round_double): Move ...
        * double-int.c: ... here.
        * tree.h (force_fit_type_double, fit_double_type, add_double_with_sign,
        add_double, neg_double, mul_double_with_sign, mul_double,
        lshift_double, rshift_double, lrotate_double, rrotate_double,
        div_and_round_double): Move prototypes ...
        * double-int.h: ... here.

2010-04-15  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/43742
        * config/sh/sh.md (doloop_end_split, dect): Undo previous patch.  Use
        matching constraints to ensure inputs match the output.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43742
        * config/sh/sh.md (doloop_end_split): Remove "+r" constraint
        in an input-only operand.       

2010-04-15  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (HOST_BITS_PER_DOUBLE_INT): Define.
        (double_int_not, double_int_lshift, double_int_rshift): Declare.
        (double_int_negative_p): Convert to static inline function.
        * double-int.c (double_int_lshift, double_int_lshift): Add new function.
        (double_int_negative_p): Remove.
        * tree.h (lshift_double, rshift_double): 
        * tree.c (build_low_bits_mask): Clean up, use double_int_* functions.
        * fold-const.c (fold_convert_const_int_from_real,
        fold_convert_const_int_from_fixed, div_if_zero_remainder): (Ditto.).
        (lshift_double): Change type of arith argument to bool.
        (rshift_double): Change type of arith argument to bool. Correct
        comment.
        * expmed.c (mask_rtx, lshift_value): (Ditto.).

2010-04-14  Bernd Schmidt  <bernds@codesourcery.com>
        
        PR target/21803
        * ifcvt.c (cond_exec_process_if_block): Look for identical sequences
        at the start and end of the then/else blocks, and omit them from the
        conversion.
        * cfgcleanup.c (flow_find_cross_jump): No longer static.  Remove MODE
        argument; all callers changed.  Pass zero to old_insns_match_p instead.
        (flow_find_head_matching_sequence): New function.
        (old_insns_match_p): Check REG_EH_REGION notes for calls.
        * basic-block.h (flow_find_cross_jump,
        flow_find_head_matching_sequence): Declare functions.

2010-04-14  Jason Merrill  <jason@redhat.com>

        PR c++/36625
        * c-common.c (attribute_takes_identifier_p): New fn.
        * c-common.h: Declare it.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*divmod<mode>4): Remove stray "&&" from
        splitter condition.
        (*udivmod<mode>4): Ditto.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (maxmin_int): Rename code attribute from
        maxminiprefix and update all users.
        (maxmin_float): Ditto from maxminfprefix.
        (logic): Ditto from logicprefix.
        (absneg_mnemonic): Ditto from absnegprefix.
        * config/i386/mmx.md: Update all users of maxminiprefix,
        maxminfprefix and logicprefix for rename.
        * config/i386/sse.md: Ditto.
        * config/i386/sync.md (sync_<code><mode>): Update for
        logicprefix rename.

2010-04-14  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42966
        * diagnostics.c (diagnostic_report_diagnostic): Mark specially
        warnings converted to errors.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_adjust_cost): Remove set but not
        used insn_type variable.
        (function_value): Add ATTRIBUTE_UNUSED to dummy variable declaration
        to avoid set-but-not-used warning.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * df-core.c (df_ref_debug): Change format string placeholder
        from 0x%x to %#x.
        * dwarf2asm.c (dw2_asm_output_data_raw,
        dw2_asm_output_data_uleb128_raw, dw2_asm_output_data_uleb128,
        dw2_asm_output_data_sleb128_raw, dw2_asm_output_data_sleb128): Ditto.
        * dwarf2out.c (output_cfi, output_cfi_directive,
        dwarf2out_do_cfi_startproc, output_loc_sequence_raw,
        output_cfa_loc_raw, output_die, output_ranges, output_file_names):
        Ditto.
        * genattrtab.c (write_test_expr, write_attr_valueq): Ditto.
        * print-rtl.c (print_rtx): Ditto.

2010-04-14  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR middle-end/42694
        * builtins.c (expand_builtin_pow_root): New function to expand pow
        calls with exponents 0.25, 0.50, 0.75, 1./3., and 1./6. into a
        series of sqrt and cbrt calls under -ffast-math.
        (expand_builtin_pow): Call it.

2010-04-14  Michael Matz  <matz@suse.de>

        PR tree-optimization/42963
        * tree-cfg.c (touched_switch_bbs): New static variable.
        (group_case_labels_stmt): New function broken out from ...
        (group_case_labels): ... here, use the above.
        (start_recording_case_labels): Allocate touched_switch_bbs.
        (end_recording_case_labels): Deallocate it, call
        group_case_labels_stmt.
        (gimple_redirect_edge_and_branch): Remember index of affected BB.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*popcountsi2_cmp_zext): Remove mode attribute
        from insn template.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashlqi3_1_slp): New insn pattern.

2010-04-13  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (cgraph_mark_inline_edge): Avoid double accounting
        of optimized out static functions.
        (cgraph_edge_badness): Add DUMP parameter and dump reasons for the
        cost computation.  Also sanity check for overflows.
        (update_caller_keys): Update cgraph_edge_badness call; properly
        update fibheap and sanity check that it is up to date.
        (add_new_edges_to_heap): Update cgraph_edge_badness.
        (cgraph_decide_inlining_of_small_function): Likewise;
        add sanity checking that badness in heap is up to date;
        improve dumping of reason; Update badness of calls to the
        offline copy of function currently inlined; dump badness
        of functions not inlined because of unit growth limits.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/32628
        * c-common.c (pointer_int_sum): Disregard overflow that occured only
        because of sign-extension change when converting to sizetype here...
        * fold-const.c (fold_convert_const_int_from_int): ...and not here.

        * fold-const.c (fold_binary_op_with_conditional_arg): Do not restrict
        the folding to constants.  Remove redundant final conversion.
        (fold_binary) <associate>: Do not associate if the re-association of
        constants alone overflows.
        (fold_binary) <FLOOR_MOD_EXPR>: Move transformation into BIT_AND_EXPR
        to the end of the list.
        (multiple_of_p) <COND_EXPR>: New case.

2010-04-13  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * opt-functions.awk (opt_sanitized_name): New.
        (opt_enum): New.
        * optc-gen.awk: Use it
        * opth-gen.awk: Use it.

2010-04-13  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (replace_uses_with_default_def_ssa_name): New function.
        (sra_modify_assign): Delete stmts loading dead data even if racc has no
        children.  Call replace_uses_with_default_def_ssa_name to handle
        SSA_NAES on lhs.

2010-04-13  Michael Matz  <matz@suse.de>

        PR middle-end/43730
        * builtins.c (expand_builtin_interclass_mathfn): Also create
        a register if the predicate doesn't match.

2010-04-13  Diego Novillo  <dnovillo@google.com>

        * Makefile.in (c-pch.o, ggc-common.o): Depend on timevar.h.
        * c-pch.c: Include timevar.h.
        (c_common_write_pch): Use TV_PCH_SAVE and TV_PCH_CPP_SAVE timers.
        (c_common_read_pch): Use TV_PCH_RESTORE and TV_PCH_CPP_RESTORE timers.
        * ggc-common.c: Include timevar.h.
        (gt_pch_save): Use TV_PCH_PTR_REALLOC and TV_PCH_PTR_SORT timers.
        * timevar.def (TV_PCH_SAVE): Define.
        (TV_PCH_CPP_SAVE): Define.
        (TV_PCH_PTR_REALLOC): Define.
        (TV_PCH_PTR_SORT): Define.
        (TV_PCH_RESTORE): Define.
        (TV_PCH_CPP_RESTORE): Define.

2010-04-13  Michael Matz  <matz@suse.de>

        * tree-ssa-reassoc.c (repropagate_negates): Merge negates also
        into MINUS_EXPRs.
        (can_reassociate_p): New function.
        (break_up_subtract_bb, reassociate_bb): Use it.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/43737
        * builtins.c (c_readstr): Fix assert.

2010-04-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (extendsidi2 splitter): Also check for DX_REG
        when generating cltd insn.

        (*ashl<mode>3_1): Remove special handling for register operand 2.
        (*ashlsi3_1_zext): Ditto.
        (*ashlhi3_1): Ditto.
        (*ashlhi3_1_lea): Ditto.
        (*ashlqi3_1): Ditto.
        (*ashlqi3_1_lea): Ditto.
        (*<shiftrt_insn><mode>3_1): Ditto.
        (*<shiftrt_insn>si3_1_zext): Ditto.
        (*<shiftrt_insn>qi3_1_slp): Ditto.
        (*<rotate_insn><mode>3_1): Ditto.
        (*<rotate_insn>si3_1_zext): Ditto.
        (*<rotate_insn>qi3_1_slp): Ditto.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (callused_id): Remove.
        (call_stmt_vars): New.
        (get_call_vi): Likewise.
        (lookup_call_use_vi): Likewise.
        (lookup_call_clobber_vi): Likewise.
        (get_call_use_vi): Likewise.
        (get_call_clobber_vi): Likewise.
        (make_transitive_closure_constraints): Likewise.
        (handle_const_call): Adjust to do per-call call-used handling.
        (handle_pure_call): Likewise.
        (find_what_var_points_to): Remove general callused handling.
        (init_base_vars): Likewise.
        (init_alias_vars): Initialize call_stmt_vars.
        (compute_points_to_sets): Process call-used and call-clobbered
        vars for call statements.
        (delete_points_to_sets): Free call_stmt_vars.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
        Only add RW dependence for dependence distance zero.
        Adjust maximal vectorization factor according to dependences.
        Move alignment handling ...
        (vect_find_same_alignment_drs): ... here.  New function.
        (vect_analyze_data_ref_dependences): Adjust.
        (vect_analyze_data_refs_alignment): Call vect_find_same_alignment_drs.
        (vect_analyze_data_refs): Adjust minimal vectorization factor
        according to data references.
        * tree-vect-loop.c (vect_analyze_loop): Analyze data-ref
        dependences before determining the vectorization factor.
        Analyze alignment after determining the vectorization factor.
        * tree-vect-slp.c ((vect_slp_analyze_bb): Analyze data-ref
        dependences before alignment.
        * tree-vectorizer.h (vect_analyze_data_ref_dependences):
        Adjust prototype.
        (vect_analyze_data_refs): Likewise.
        (MAX_VECTORIZATION_FACTOR): New define.

2010-04-13  Duncan Sands  <baldrick@free.fr>

        * except.h (lang_eh_type_covers): Remove.
        * except.c (lang_eh_type_covers): Likewise.

2010-04-13  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
            Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * gcc/config/s390/s390.md: Replace TARGET_64BIT with TARGET_ZARCH.
        * gcc/config/s390/s390.c: Replace UNTIS_PER_WORD with
        UNITS_PER_LONG where it is ABI relevant.
        (s390_return_addr_rtx): Likewise.
        (s390_back_chain_rtx): Likewise.
        (s390_frame_area): Likewise.
        (s390_frame_info): Likewise.
        (s390_initial_elimination_offset): Likewise.
        (save_gprs): Likewise.
        (s390_emit_prologue): Likewise.
        (s390_emit_epilogue): Likewise.
        (s390_function_arg_advance): Likewise.
        (s390_function_arg): Likewise.
        (s390_va_start): Likewise.
        (s390_gimplify_va_arg): Likewise.
        (s390_function_profiler): Likewise.
        (s390_optimize_prologue): Likewise.
        (s390_rtx_costs): Likewise.
        (s390_secondary_reload): Likewise.
        (s390_promote_function_mode): Likewise.
        (s390_hard_regno_mode_ok): Replace TARGET_64BIT with TARGET_ZARCH.
        (s390_scalar_mode_supported_p): Disallow TImode if no 64 bit
        registers available.
        (s390_unwind_word_mode): New function.
        (s390_function_value): Split 64 bit values into register pair if
        used as return value.
        (s390_call_saved_register_used): Don't use HARD_REGNO_NREGS for
        function call parameters.  Handle parallels.
        (TARGET_SCALAR_MODE_SUPPORTED_P): New macro.
        (HARD_REGNO_CALL_PART_CLOBBERED): New macro.
        (DWARF_CIE_DATA_ALIGNMENT): New macro.
        (s390_expand_setmem): Remove unused variable src_addr.
        * gcc/longlong.h: Make smul_ppmm and sdiv_qrnnd inline asms to
        deal with 64 bit registers.
        * gcc/config/s390/s390.h: Define __zarch__ predefined macro.
        Replace UNITS_PER_WORD with UNITS_PER_LONG where it is ABI relevant.
        (UNITS_PER_LONG): New macro.
        * libjava/include/s390-signal.h: Define extended ucontext
        structure containing the upper halfs of the 64 bit registers.

2010-04-13  Simon Baldwin  <simonb@google.com>

        * cfgexpand.c (gimple_expand_cfg): Clarify warning message text.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple.c (walk_gimple_op) <GIMPLE_ASSIGN>: Do not request a pure
        rvalue on the RHS if the LHS is of a non-renamable type.
        * tree-ssa-ccp.c (maybe_fold_offset_to_component_ref): Fold result.

2010-04-13  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (cc1_options): Handle -iplugindir before processing
        the cc1 spec. Only add -iplugindir once.
        (cpp_unique_options): Add -iplugindir option if -fplugin* options
        found.
        * common.opt (iplugindir): Remove `Separate' property, initialize.
        * plugin.c (default_plugin_dir_name): Error with missing -iplugindir
        option.
        * Makefile.in (check-%, check-parallel-%): Create plugin dir.
        (distclean): Remove plugin dir.
        * doc/invoke.texi: Document -iplugindir.

2010-04-13  Basile Starynkevitch  <basile@starynkevitch.net>

        * doc/plugins.texi (Loading Plugins): Document short
        -fplugin=foo option.
        (Plugin API): Mention default_plugin_dir_name function.

        * gcc.c (find_file_spec_function): Add new declaration.
        (static_spec_func): Use it for "find-file".
        (find_file_spec_function): Add new function.
        (cc1_options): Add -iplugindir option if -fplugin* options found.

        * gcc-plugin.h (default_plugin_dir_name): Added new declaration.

        * plugin.c (add_new_plugin): Updated comment, and handle short
        plugin name.
        (default_plugin_dir_name): Added new function.

        * common.opt (iplugindir): New option to set the plugin directory.

2010-04-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_rotate): New code iterator.
        (rotate_insn): New code attribute.
        (rotate): Ditto.
        (SWIM124): New mode iterator.
        (<rotate_insn>ti3): New expander.
        (<rotate_insn>di3): Macroize expander from {rotl,rotr}di3 using
        any_rotate code iterator.
        (<rotate_insn><mode>3) Macroize expander from {rotl,rotr}{qi,hi,si}3
        using any_rotate code iterator and SWIM124 mode iterator.
        (ix86_rotlti3): New insn_and_split pattern.
        (ix86_rotrti3): Ditto.
        (ix86_rotl<dwi>3_doubleword): Macroize insn_and_split pattern from
        ix86_rotl{di,ti}3 patterns.
        (ix86_rotr<dwi>3_doubleword): Ditto from ix86_rotr{di,ti}3 patterns.
        (*<rotate_insn><mode>3_1): Merge with *{rotl,rotr}{qi,hi,si}3_1_one_bit
        and *{rotl,rotr}di3_1_one_bit_rex64. Macroize insn from
        *{rotl,rotr}{qi,hi,si}3_1 and *{rotl,rotr}di3_1_rex64 using any_rotate
        code iterator and SWI mode iterator.
        (*<rotate_insn>si3_1_zext): Merge with *{rotl,rotr}si3_1_one_bit_zext.
        Macroize insn from {rotl,rotr}si3_1_zext using any_rotate
        code iterator.
        (*<rotate_insn>qi3_1_slp): Merge with *{rotl,rotr}qi3_1_one_bit_slp.
        Macroize insn from {rotl,rotr}qi3_1_slp using any_rotate code iterator.
        (bswap rotatert splitter): Add splitter.
        (bswap splitter): Macroize splitter using any_rotate code iterator.
        Add insn predicate to split only for TARGET_USE_XCHGB or when
        optimizing function for size.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (emit_move_sequence): Remove use of
        deleted variable flag_argument_noalias.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc: Removed *-*-solaris2.7* from list of obsolete
        configurations.
        Add to unsupported targets list.
        * configure.ac (gcc_cv_as_tls): Removed i[34567]86-*-solaris2.[567]*,
        sparc*-sun-solaris2.[567]* from target lists.
        * configure: Regenerate.
        * doc/install.texi (Specific, *-*-solaris2*): Document Solaris 7
        removal.
        Remove Solaris 7 patch references.
        (Specific, sparc-sun-solaris2.7): Removed.
        (sparc-sun-solaris2*): Update Solaris 7 example.
        (sparc64-*-solaris2*): Likewise.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.build (alpha*-dec-osf4*): Remove.
        * config.gcc: Remove alpha*-dec-osf4*, alpha-dec-osf5.0* from list
        of obsolete configurations.
        (alpha*-dec-osf[45]*): Remove alpha*-dec-osf4*, alpha-dec-osf5.0*
        support.
        * config/alpha/t-osf4: Renamed to ...
        * config/alpha/t-osf5: ... this.
        * config/alpha/osf.h: Renamed to ...
        * config/alpha/osf5.h: ... this.
        Merged old osf5.h contents.
        Update comments.
        (ASM_SPEC): Use ASM_OLDAS_SPEC directly.
        (EXTRA_SPECS): Removed.
        * doc/install.texi (Specific, alpha*-dec-osf5.1): Renamed to
        reflect removal of Tru64 UNIX V4.0/V5.0 support.
        Document that.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/contrib.texi (Contributors, Rainer Orth): Update.

2010-04-12  Kai Tietz  <kai.tietz@onevision.com>

        PR/43702
        * config/i386/i386.c (x86_this_parameter): Handle aggregate for
        __thiscall convention.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (hppa_legitimize_address): Remove unused variable
        orig_base.
        * config/pa/pa.md (call, call_value): Remove unused variable call_insn.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * function.c (assign_parms_initialize_all): Add unused attribute
        to fntype.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * gsstruct.def (GSS_CALL): New.
        * gimple.def (GIMPLE_CALL): Change to GSS_CALL.
        * gimple.h: Include tree-ssa-alias.h.
        (struct gimple_statement_call): New.
        (union gimple_statement_struct_d): Add gimple_call member.
        (gimple_call_reset_alias_info): Declare.
        (gimple_call_use_set): New function.
        (gimple_call_clobber_set): Likewise.
        * Makefile.in (GIMPLE_H): Add tree-ssa-alias.h.
        * gimple.c (gimple_call_reset_alias_info): New function.
        (gimple_build_call_1): Call it.
        * lto-streamer-in.c (input_gimple_stmt): Likewise.
        * tree-inline.c (remap_gimple_stmt): Likewise.
        (expand_call_inline): Remove callused handling.
        * cfgexpand.c (update_alias_info_with_stack_vars): Likewise.
        * tree-dfa.c (dump_variable): Likewise.
        * tree-parloops.c (parallelize_loops): Likewise.
        * tree-ssa.c (init_tree_ssa): Likewise.
        (delete_tree_ssa): Likewise.
        * tree-flow-inline.h (is_call_used): Remove.
        * tree-flow.h (struct gimple_df): Remove callused member.
        * tree-nrv.c (dest_safe_for_nrv_p): Adjust predicate.
        * tree-ssa-alias.c (dump_alias_info): Remove callused handling.
        (ref_maybe_used_by_call_p_1): Simplify.
        (call_may_clobber_ref_p_1): Likewise.
        * tree-ssa-structalias.c (compute_points_to_sets): Set
        the call stmt used and clobbered sets.
        * tree-tailcall.c (suitable_for_tail_opt_p): Adjust predicate.
        (find_tail_calls): Verify the tail call.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * ipa.c (cgraph_postorder): Adjust postorder to guarantee
        single-iteration always-inline inlining.
        * ipa-inline.c (cgraph_mark_inline): Do not return anything.
        (cgraph_decide_inlining): Do not handle always-inline specially.
        (try_inline): Remove always-inline cycle detection special case.
        Do not recurse on always-inlines.
        (cgraph_early_inlining): Do not iterate if not optimizing.
        (cgraph_gate_early_inlining): remove.
        (pass_early_inline): Run unconditionally.
        (gate_cgraph_decide_inlining): New function.
        (pass_ipa_inline): Use it.  Do not run the IPA inliner if
        not inlining or optimizing.
        (cgraph_decide_inlining_of_small_functions): Also consider
        always-inline functions.
        (cgraph_default_inline_p): Return true for nodes which should
        disregard inline limits.
        (estimate_function_body_sizes): Assume zero size and time for
        nodes which are marked as disregarding inline limits.
        (cgraph_decide_recursive_inlining): Do not perform recursive
        inlining on always-inline nodes.

2010-04-12  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43699
        * c-typeck.c (c_process_expr_stmt): Call mark_exp_read even
        for exprs satisfying handled_component_p.

2010-04-12  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (categorize_ctor_elements_1): Properly count sub-elements of
        non-constant aggregate elements.

        * gimplify.c (gimplify_init_constructor): Do not pre-evaluate if this
        is a real initialization.

2010-04-12  Shujing Zhao  <pearly.zhao@oracle.com>

        PR c/36774
        * c-decl.c (start_function): Move forward check for nested function.

2010-04-11  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh-protos.h (sh_legitimize_reload_address): Declare.
        * config/sh/sh.c: Include reload.h.
        (sh_legitimize_reload_address): New.
        * config/sh/sh.h (LEGITIMIZE_RELOAD_ADDRESS): Use
        sh_legitimize_reload_address.

2010-04-11  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/sh/sh.md (*movqi_pop): New insn pattern.
        * config/sh/predicates.md (sh_no_delay_pop_operand): New predicate.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_shiftrt): New code iterator.
        (shiftrt_insn): New code attribute.
        (shiftrt): Ditto.
        (<shiftrt_insn><mode>3): Macroize expander from {ashr,lshr}<mode>3
        using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword): Macroize insn_and_split from
        *{ashr,lshr}<mode>3_doubleword using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword peephole2): Macroize peephole2
        pattern from corresponding peephole2 patterns.
        (*<shiftrt_insn><mode>3_1): Macroize insn from *{ashr,lshr}<mode>3_1
        using any_shiftrt code iterator.
        (*<shiftrt_insn>si3_1_zext): Ditto from *{ashr,lshr}si3_1_zext.
        (*<shiftrt_insn>qi3_1_slp): Ditto from *{ashr,lshr}qi3_1_slp.
        (*<shiftrt_insn><mode>3_cmp): Ditto from *{ashr,lshr}<mode>3_cmp.
        (*<shiftrt_insn><mode>3_cmp_zext): Ditto from
        *{ashr,lshr}<mode>3_cmp_zext.
        (*<shiftrt_insn><mode>3_cconly): Ditto from *{ashr,lshr}<mode>3_cconly.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashr<mode>3_cconly): Fix wrong mode of
        scratch register.
        (*lshr<mode>3_cconly): Ditto.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (lshr<mode>3): Macroize expander from
        lshr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*lshr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *lshr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*lshr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (*lshr<mode>3_1): Merge with *lshr{qi,hi,si}3_1_one_bit and
        *lshrdi3_1_one_bit_rex64. Macroize insn from *lshr{qi,hi,si}3_1
        and *lshrdi3_1_rex64 using SWI mode iterator.
        (*lshrsi3_1_zext): Merge with *lshrsi3_1_one_bit_zext.
        (*lshrqi3_1_slp): Merge with *lshrqi3_1_one_bit_slp.
        (*lshr<mode>3_cmp): Merge with *lshr{qi,hi,si}3_one_bit_cmp and
        *lshrdi3_one_bit_cmp_rex64. Macroize insn from *lshr{qi,hi,si}3_cmp
        and *lshrdi3_cmp_rex64 using SWI mode iterator.
        (*lshrsi3_cmp_zext): Merge with *lshrsi3_cmp_one_bit_zext.
        (*lshr<mode>3_cconly): Merge with *lshr{qi,hi,si}3_one_bit_cconly and
        *lshrdi3_one_bit_cconly_rex64. Macroize insn from
        *lshr{qi,hi,si}3_cconly and *lshrdi3_cconly_rex64 using
        SWI mode iterator.

2010-04-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (ashr<mode>3): Macroize expander from
        ashr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*ashr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (ashrdi3_cvt): Rename from ashrdi3_63_rex64.
        (ashrsi3_cvt): Rename from ashrsi3_31.
        (*ashrsi3_cvt_zext): Rename from *ashrsi3_31_zext.
        (x86_shift<mode>_adj_3): Macroize expander from x86_shift_adj_3
        and x86_64_shift_adj_3 using SWI48 mode iterator.
        (*ashr<mode>3_1): Merge with *ashr{qi,hi,si}3_1_one_bit and
        *ashrdi3_1_one_bit_rex64. Macroize insn from *ashr{qi,hi,si}3_1
        and *ashrdi3_1_rex64 using SWI mode iterator.
        (*ashrsi3_1_zext): Merge with *ashrsi3_1_one_bit_zext.
        (*ashrqi3_1_slp): Merge with *ashrqi3_1_one_bit_slp.
        (*ashr<mode>3_cmp): Merge with *ashr{qi,hi,si}3_one_bit_cmp and
        *ashrdi3_one_bit_cmp_rex64. Macroize insn from *ashr{qi,hi,si}3_cmp
        and *ashrdi3_cmp_rex64 using SWI mode iterator.
        (*ashrsi3_cmp_zext): Merge with *ashrsi3_cmp_one_bit_zext.
        (*ashr<mode>3_cconly): Merge with *ashr{qi,hi,si}3_one_bit_cconly and
        *ashrdi3_one_bit_cconly_rex64. Macroize insn from
        *ashr{qi,hi,si}3_cconly and *ashrdi3_cconly_rex64 using
        SWI mode iterator.
        (sign_extend splitters): Update for renamed ashr{di,si}3_cvt patterns.
        * config/i386/i386.c (ix86_split_ashr): Update for renamed
        x86_shift<mode>_adj_3 expanders.

2010-04-10  Wei Guozhi  <carrot@google.com>

        PR target/42601
        * config/arm/arm.c (arm_pic_static_addr): New function.
        (legitimize_pic_address): Call arm_pic_static_addr when it detects
        a static symbol.
        (arm_output_addr_const_extra): Output expression for new pattern.
        * config/arm/arm.md (UNSPEC_SYMBOL_OFFSET): New unspec symbol.

2010-04-10  Bernd Schmidt  <bernds@codesourcery.com>

        * ira-costs.c (record_reg_classes): Ignore alternatives that are
        not enabled.

        * Makefile.in (web.o): Depend on insn-config.h and $(RECOG_H).
        * web.c: Include "insn-config.h" and "recog.h".
        (union_match_dups): New function.
        (web_main): Call it.
        (union_defs): Don't try to recognize match_dups.

        * reload1.c (eliminate_regs_in_insn): Don't restore an operand
        if doing so would replace the entire pattern.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43707
        PR target/43709
        * config/i386/i386.md (*ashl<mode>3_doubleword): Split to insn
        and splitter pattern.  Change splitter operand 1 predicate to
        nonmemory_operand.

2010-04-09  Martin Jambor  <mjambor@suse.cz>

        * ipa-cp.c (ipcp_lats_are_equal): Return true also if the two
        lattices are addresses of CONST_DECLs with the same initial value.
        (ipcp_print_all_lattices): Print values of CONST_DECLs.
        * ipa-prop.c (ipa_print_node_jump_functions): Likewise.

2010-04-09  Eric Botcazou  <ebotcazou@adacore.com>
            Bernd Schmidt  <bernds@codesourcery.com>

        * loop-invariant.c (replace_uses): New static function.
        (move_invariant_reg): Use it to ensure we can replace the uses.

2010-04-09  Hariharan Sandanagobalane  <hariharan@picochip.com>

        * config/picochip/picochip.c (picochip_rtx_costs): Use correct
        function template.
        (picochip_override_options): Enable section anchors only above -O1.
        (picochip_reorg): Fixed a couple of build warnings.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (plugin -rdynamic test): Log result.
        * configure: Regenerate.
        * config/sol2.h (LINK_SPEC): Handle -rdynamic.
        (RDYNAMIC_SPEC): Define.
        * config/sol2-gld.h (RDYNAMIC_SPEC): Redefine.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Determine Sun ld version numbers.
        (comdat_group): Restrict GNU ld version checks to gld.
        (comdat_group, *-*-solaris2.1[1-9]*): Enable for Sun ld > 1.1688.
        (enable_comdat): Support --enable-comdat.
        * configure: Regenerate.
        * doc/install.texi (Configuration): Document --enable-comdat.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sparc/sol2-gld.h: Remove SPARC reference.  Rename ...
        * config/sol2-gld.h: ... here.
        * config.gcc (sparc*-*-solaris2*): Reflect this.
        (i[34567]86-*-solaris2*): Use it.

2010-04-09  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/ia64.c (ia64_dfa_new_cycle): Remove unused variable
        setup_clocks_p.
        (final_emit_insn_group_barriers): Remove unused variable prev_insn.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42965
        * diagnostic.c (diagnostic_initialize): Initialize
        some_warnings_are_errors.
        (diagnostic_finish): New.
        (diagnostic_action_after_output): Call it before exiting.
        (diagnostic_report_diagnostic): Do not print message here. Set
        some_warnings_are_errors.
        * diagnostic.h (diagnostic_context): Delete
        issue_warnings_are_errors_message. Add some_warnings_are_errors.
        (diagnostic_finish): Declare.
        * toplev.c (toplev_main): Call it before exit.

2010-04-09  Jason Merrill  <jason@redhat.com>

        PR c++/42623
        * c-common.c (c_sizeof_or_alignof_type): Return error_mark_node
        for incomplete type.

        PR c++/41788
        * stor-layout.c (finalize_record_size): Don't change TYPE_PACKED
        based on a warning flag.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-pretty-print.c (dump_generic_node): Dump TYPE_VECTOR_SUBPARTS.

2010-04-09  Iain Sandoe  <iains@gcc.gnu.org>

        PR bootstrap/43684
        * varasm.c (default_assemble_visibility): Wrap vars that are
        set, but unused, by targets without GAS.
        * config/rs6000/rs6000.c: (paired_emit_vector_compare):
        Remove set, but unused, vars.
        (rs6000_legitimize_tls_address): Likewise.
        (altivec_expand_dst_builtin): Likewise.
        * config/darwin.c (machopic_classify_symbol): Likewise.
        (machopic_indirection_name): Likewise.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (DWI): New mode iterator.
        (S): New mode attribute.
        (shift_operand): Ditto.
        (shift_immediate_operand): Ditto.
        (ashl_input_operand): Ditto.
        (ashl<mode>3): Macroize expander from ashl{qi,hi,si,di,ti}3_1
        using SDWIM mode iterator.
        (*ashl<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashl{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashl<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (x86_shift<mode>_adj_1): Macroize expander from x86_shift_adj_1
        and x86_64_shift_adj_1 using SWI48 mode iterator.
        (x86_shift<mode>_adj_2): Ditto.
        (*ashldi3_1_rex64): Split TYPE_LEA pattern.
        (*ashl<mode>3_1): Macroize insn from *ashlsi3_1 and *ashldi3_1_rex64
        using SWI48 mode iterator.
        (*ashl<mode>3_cmp): Macroize insn from *ashl{qi,hi,si}3_cmp and
        *ashldi3_cmp_rex64 using SWI mode iterator.
        (*ashl<mode>3_cconly): Macroize insn from *ashl{qi,hi,si}3_cconly and
        *ashldi3_cconly_rex64 using SWI mode iterator.
        * config/i386/i386.c (ix86_split_ashl): Update for renamed
        x86_shift<mode>_adj_{1,2}.
        (ix86_split_ashr): Ditto.
        (ix86_split_lshr): Ditto.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * target.h (builtin_conversion): Pass in input and output types.
        * targhooks.c (default_builtin_vectorized_conversion): Adjust.
        * targhooks.h (default_builtin_vectorized_conversion): Likewise.
        * tree-vect-stmts.c (vectorizable_conversion): Adjust.
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_CONVERSION): Adjust.

        * config/i386/i386.c (ix86_vectorize_builtin_conversion): Adjust.
        Handle AVX modes.
        * config/rs6000/rs6000.c (rs6000_builtin_conversion): Adjust.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        PR target/43152
        * config/i386/sse.md (vcond<mode>): Handle AVX modes as well.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.h (struct _stmt_vec_info): Document
        that vectype is the type of the LHS.
        (supportable_widening_operation, supportable_narrowing_operation):
        Get both input and output vector types as arguments.
        (vect_is_simple_use_1): Declare.
        (get_same_sized_vectype): Likewise.
        * tree-vect-loop.c (vect_determine_vectorization_factor):
        Set STMT_VINFO_VECTYPE to the vector type of the def.
        (vectorizable_reduction): Adjust.
        * tree-vect-patterns.c (vect_recog_widen_mult_pattern):
        Adjust.  Specify the output vector type.
        (vect_pattern_recog_1): Adjust.
        * tree-vect-stmts.c (get_same_sized_vectype): New function.
        (vectorizable_call): Adjust.
        (vectorizable_conversion): Likewise.
        (vectorizable_operation): Likewise.
        (vectorizable_type_demotion): Likewise.
        (vectorizable_type_promotion): Likewise.
        (vect_analyze_stmt): Set STMT_VINFO_VECTYPE to the vector type of
        the def.
        (vect_is_simple_use_1): New function.
        (supportable_widening_operation): Get both input and output
        vector types.
        (supportable_narrowing_operation): Likewise.
        * tree-vect-slp.c (vect_schedule_slp_instance): Adjust.

2010-04-09  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/cygming.h (TARGET_OS_CPP_BUILTINS): Add
        __thiscall and _thiscall as predefined macros.
        * config/i386/i386.c (ix86_handle_cconv_attribute): Add
        thiscall attribute handling.
        (ix86_comp_type_attributes): Likewise.
        (ix86_function_regparm): Likewise.
        (ix86_return_pops_args): Likewise.
        (init_cumulative_args): Likewise.
        (find_drap_reg): Likewise.
        (ix86_static_chain): Likewise.
        (x86_this_parameter): Likewise.
        (x86_output_mi_thunk): Likewise.
        (ix86_attribute_table): Add description for thiscall attribute.
        * config/i386/i386.h (ix86_args): Adjust comment for member fastcall.
        * doc/extend.texi: Add documentation for thiscall.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/28584
        * c.opt (Wint-to-pointer-cast): Available in C++.
        * doc/invoke.texi (Wint-to-pointer-cast): Available in C++.

2010-04-08  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (TREE_ADDRESSABLE): Document its effect for function types.
        * calls.c (expand_call): Pass the function type to aggregate_value_p.
        * function.c (aggregate_value_p): Do not honor DECL_BY_REFERENCE on
        the target function of a CALL_EXPR.  Honor TREE_ADDRESSABLE on the
        function type instead.  Reorder and simplify checks.

        * gimplify.c (gimplify_modify_expr_rhs) <WITH_SIZE_EXPR>: New case.

2010-04-08  Jing Yu  <jingyu@google.com>
            Zdenek Dvorak  <ook@ucw.cz>

        PR tree-optimization/42720
        * tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Move one-time
        loop unswitch conditions here from ...
        (tree_unswitch_single_loop): ... here.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix comments and simplify logic.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c (if_convertible_loop_p): Remove unused parameter.
        (tree_if_conversion): Same.  Update call to if_convertible_loop_p.
        (main_tree_if_conversion): Update call to tree_if_conversion.

2010-04-08  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42485
        * doc/invoke.texi (-b,-V): Delete.
        * doc/tm.texi: Do not mention -b.
        * gcc.c (display_help): Delete -b and -V.
        (process_command): Delete -b and -V.
        * gcc.h (DEFAULT_SWITCH_TAKES_ARG): Delete -b and -V.

2010-04-08  Christian Borntraeger  <borntraeger@de.ibm.com>
            Wolfgang Gellerich  <gellerich@de.ibm.com>

        Implement target hook for loop unrolling
        * target.h (loop_unroll_adjust): Add a new target hook function.
        * target-def.h (TARGET_LOOP_UNROLL_ADJUST): Likewise.
        * doc/tm.texi (TARGET_LOOP_UNROLL_ADJUST): Document it.
        * config/s390/s390.c (TARGET_LOOP_UNROLL_ADJUST): Define it.
        (s390_loop_unroll_adjust): Implement the new target hook for s390.
        * loop-unroll.c (decide_unroll_runtime_iterations): Call loop unroll
        target hook.
        (decide_unroll_stupid): Likewise.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/43643
        * config/i386/gmon-sol2.c [__x86_64__]: Properly restore %rcx.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, i?86-*-solaris2.10): Fix grammar.
        (Specific, *-*-solaris2*): Likewise.
        Don't prefer Sun as over GNU as.

2010-04-08  Wolfgang Gellerich  <gellerich@de.ibm.com>

        * config/s390/s390.c (override_options): Adjust the z10
          defaults for max-unroll-times, max-completely-peeled-insns
          and max-completely-peel-times.

2010-04-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_expand_movmem): Issue prefetch
        instructions for z10.
        (s390_expand_setmem): Likewise.
        (s390_expand_cmpmem): Likewise.

2010-04-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43679
        * tree-ssa-pre.c (eliminate): Only propagate copies.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43681
        * expr.c (block_move_libcall_safe_for_call_parm): Avoid
        set but not used variable warning.

2010-04-08  Wei Guozhi  <carrot@google.com>

        PR target/41653
        * config/arm/arm.c (thumb1_size_rtx_costs): New function.
        (arm_size_rtx_costs): Call the new function when optimized for size.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43670
        * cfgexpand.c (expand_debug_expr): If for non-NULL offset
        op0 is not a MEM, just return NULL instead of assertion
        failure.
        (discover_nonconstant_array_refs): Don't walk debug stmts.

2010-04-08  Doug Kwan  <dougkwan@google.com>

        * configure.ac: Recognize gold and do not use its version number
        to test ld features.
        * configure: Regenerate.

2010-04-08  Maxim Kuvyrkov  <maxim@codesourcery.com>

        PR middle-end/40815
        * tree-ssa-reassoc.c (broken_up_substracts): Rename to plus_negates.
        (negate_value): Move code to push elements to broken_up_substracts ...
        (eliminate_plus_minus_pair): ... here.  Push operands that have no
        negative pair to plus_negates.
        (repropagate_negates, init_reassoc, fini_reassoc): Update.

2010-04-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/install.texi (Configuration): Move description of
        --enable-lto, --with-libelf*, --enable-gold from Java section to
        general section.

        * doc/generic.texi (Working with declarations)
        (Function Properties, C and C++ Trees): Fix typos.
        * doc/sourcebuild.texi (Top Level): Likewise.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR c/18624
        * tree.h (DECL_READ_P): Define.
        (struct tree_decl_common): Add decl_read_flag.
        * c-decl.c (pop_scope): If TREE_USED but !DECL_READ_P, issue
        a set but not used warning.
        (merge_decls): Merge DECL_READ_P flag.
        (finish_decl, build_compound_literal): Set DECL_READ_P flag.
        (finish_function): Issue -Wunused-but-set-parameter diagnostics.
        * c-common.c (handle_used_attribute, handle_unused_attribute):
        Likewise.
        * c-tree.h (default_function_array_read_conversion, mark_exp_read):
        New prototypes.
        * c-typeck.c (default_function_array_read_conversion, mark_exp_read):
        New functions.
        (default_conversion, c_process_expr_stmt): Call mark_exp_read.
        * c-parser.c (c_parser_initializer, c_parser_expr_no_commas,
        c_parser_binary_expression, c_parser_cast_expression,
        c_parser_expr_list, c_parser_omp_atomic, c_parser_omp_for_loop):
        Call default_function_array_read_conversion instead of
        default_function_array_conversion where needed.
        (c_parser_unary_expression, c_parser_conditional_expression,
        c_parser_postfix_expression_after_primary, c_parser_initelt):
        Likewise.  Call mark_exp_read where needed.
        (c_parser_statement_after_labels, c_parser_asm_operands,
        c_parser_typeof_specifier, c_parser_sizeof_expression,
        c_parser_alignof_expression, c_parser_initval): Call mark_exp_read
        where needed.
        * common.opt (Wunused-but-set-variable, Wunused-but-set-parameter):
        New.
        * toplev.c (warn_unused_but_set_variable): Default to warn_unused.
        (warn_unused_but_set_parameter): Default to warn_unused
        && extra_warnings.
        * doc/invoke.texi: Document -Wunused-but-set-variable and
        -Wunused-but-set-parameter.

        * tree-ssa-pre.c (my_rev_post_order_compute): Remove set but not
        used count variable.
        * genemit.c (gen_expand, gen_split): Avoid set but not used warnings
        when operandN variables aren't used in the body of the expander
        or splitter.
        * tree-outof-ssa.c (FOR_EACH_ELIM_GRAPH_SUCC,
        FOR_EACH_ELIM_GRAPH_PRED): Avoid set but not used warnings.
        * tree-ssa-operands.h (FOR_EACH_SSA_TREE_OPERAND): Likewise.
        * tree-flow.h (FOR_EACH_IMM_USE_FAST, FOR_EACH_IMM_USE_STMT,
        FOR_EACH_IMM_USE_ON_STMT): Likewise.
        * tree.h (FOR_EACH_CONSTRUCTOR_ELT): Likewise.
        * tree.c (PROCESS_ARG): Likewise.

2010-04-07  Simon Baldwin  <simonb@google.com>

        * diagnostic.h (diagnostic_override_option_index): New macro to
        set a diagnostic's option_index.
        * c-tree.h (c_cpp_error): Add warning reason argument.
        * opts.c (_warning_as_error_callback): New.
        (register_warning_as_error_callback): Store callback for
        warnings enabled via enable_warning_as_error.
        (enable_warning_as_error): Call callback, minor code tidy.
        * opts.h (register_warning_as_error_callback): Declare.
        * c-opts.c (warning_as_error_callback): New, set cpp_opts flag in
        response to -Werror=.
        (c_common_init_options): Register warning_as_error_callback in opts.c.
        * common.opt: Add -Wno-cpp option.
        * c-common.c (struct reason_option_codes_t): Map cpp warning
        reason codes to gcc option indexes.
        * (c_option_controlling_cpp_error): New function, lookup the gcc
        option index for a cpp warning reason code.
        * (c_cpp_error): Add warning reason argument, call
        c_option_controlling_cpp_error for diagnostic_override_option_index.
        * doc/invoke.texi: Document -Wno-cpp.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * ipa-reference.c (mark_load): Use get_base_address.
        (mark_store): Likewise.

        * tree-ssa-ccp.c (gimplify_and_update_call_from_tree): Avoid
        inserting GIMPLE_NOPs into the IL.
        * tree-ssa-structalias.c (get_constraint_for_component_ref):
        Explicitly strip handled components and indirect references.

        * fold-const.c (fold_unary_loc): Do not strip qualifiers when
        folding address expressions.
        * gimple.c (gimple_ior_addresses_taken_1): Use get_base_address.
        * tree-ssa-alias.c (decl_refs_may_alias_p): Do not use
        operand_equal_p to compare decls.
        (ptr_deref_may_alias_decl_p): Likewise.
        * tree-ssa-operands.c (get_asm_expr_operands): Simplify
        * tree-ssa-forwprop.c (forward_propagate_into_gimple_cond):
        Handle reversed comparison ops.
        * tree-sra.c (asm_visit_addr): Use get_base_address.
        * ipa-prop.c (visit_store_addr_for_mod_analysis): Use get_base_address.
        * ipa-reference.c (mark_address): Use get_base_address.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-forwprop.c (forward_propagate_addr_expr):
        Propagate constants everywhere.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43516
        * tree.c (MAX_INT_CACHED_PREC): Define.
        (nonstandard_integer_type_cache): New array.
        (build_nonstandard_integer_type): Cache results for precision
        <= MAX_INT_CACHED_PREC.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * doc/invoke.texi (-fargument-alias, -fargument-noalias,
        -fargument-noalias-global, -fargument-noalias-anything): Remove.
        * common.opt: Likewise.
        * tree-ssa-structalias.c (intra_create_variable_infos): Adjust comment.
        * alias.c (base_alias_check): Remove flag_argument_noalias handling.
        (nonoverlapping_memrefs_p): Likewise.
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Likewise.
        * opts.c (common_handle_option): Handle OPT_fargument_alias,
        OPT_fargument_noalias, OPT_fargument_noalias_anything and
        OPT_fargument_noalias_global for backward compatibility.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43270
        * tree-vrp.c (check_array_ref): Fix flexible array member detection.
        * tree-ssa-sccvn.h (fully_constant_vn_reference_p): Declare.
        * tree-ssa-pre.c (phi_translate_1): Adjust.
        (fully_constant_expression): Split out vn_reference handling to ...
        * tree-ssa-sccvn.c (fully_constant_vn_reference_p): ... here.
        Fold reads from constant strings.
        (vn_reference_lookup): Handle fully constant references.
        (vn_reference_lookup_pieces): Likewise.
        * Makefile.in (expmed.o-warn): Add -Wno-error.

2010-04-07  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (find_param_candidates): Allow scalar va_list types.

2010-04-07  Iain Sandoe  <iains@gcc.gnu.org>

        PR driver/41594
        * gcc.c: Add -static-libstdc++ to list of recognized options.

2010-04-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (i[34567]86-*-solaris2*): Default with_tune_32 to generic.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * expr.c (expand_expr_real_1): For TARGET_MEM_REFs with pointer
        bases build simple mem attributes to retain points-to information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * alias.c (ao_ref_from_mem): Without MEM_OFFSET or MEM_SIZE
        preserve points-to related information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Do not
        discard plain indirect references.
        * fold-const.c (operand_equal_p): Guard against NULL_TREE type.
        * tree.c (tree_nop_conversion): Likewise.

2010-04-07  Dodji Seketeli  <dodji@redhat.com>

        PR debug/43628
        * dwarf2out.c (modified_type_die): Ignore artificial typedefs.

2010-04-06  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/i386.c (ix86_handle_cconv_attribute): Ignore
        calling convention attributes on METHOD_TYPEs for w64 ABI, too.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Sort static functions in topological order.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (max_signed_precision_type): Use
        lang_hooks.types.type_for_size instead of
        build_nonstandard_integer_type.
        When converting an unsigned type to signed, double its precision.
        (gcc_type_for_interval): Use lang_hooks.types.type_for_size.
        (gcc_type_for_iv_of_clast_loop): Call max_signed_precision_type.
        (graphite_create_new_loop_guard): When ub + 1 wraps around,
        use lb <= ub.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (graphite_create_new_loop_guard): Use
        POINTER_PLUS_EXPR for pointer types.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * Makefile.in (graphite-clast-to-gimple.o): Depends on langhooks.h.
        * graphite-clast-to-gimple.c: Include langhooks.h.
        (max_signed_precision_type): New.
        (max_precision_type): Takes two types as arguments.
        (precision_for_value): New.
        (precision_for_interval): New.
        (gcc_type_for_interval): New.
        (gcc_type_for_value): New.
        (gcc_type_for_clast_term): New.
        (gcc_type_for_clast_red): New.
        (gcc_type_for_clast_bin): New.
        (gcc_type_for_clast_expr): Split up into several functions.
        (gcc_type_for_clast_eq): Rewritten.
        (compute_bounds_for_level): New.
        (compute_type_for_level_1): New.
        (compute_type_for_level): New.
        (gcc_type_for_cloog_iv): Removed.
        (gcc_type_for_iv_of_clast_loop): Rewritten.
        (graphite_create_new_loop): Compute the lower and upper bound types
        with gcc_type_for_clast_expr.
        (graphite_create_new_loop_guard): Same.
        (find_cloog_iv_in_expr): Removed.
        (compute_cloog_iv_types_1): Removed.
        (compute_cloog_iv_types): Removed.
        (gloog): Do not call compute_cloog_iv_types.
        * graphite-sese-to-poly.c (new_gimple_bb): Do not initialize
        GBB_CLOOG_IV_TYPES.
        (free_data_refs_aux): Do not free GBB_CLOOG_IV_TYPES.
        * sese.h (struct gimple_bb): Removed field cloog_iv_types.
        (GBB_CLOOG_IV_TYPES): Removed.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Assert that
        gimple_phi_num_args of the loop close SSA phi node is equal to 1.
        (detect_commutative_reduction): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (graphite_verify): Remove redundant
        call to verify_ssa.  Invoke verify_loop_closed_ssa with an extra
        argument.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa_form): Same.
        * graphite-sese-to-poly.c (rewrite_reductions_out_of_ssa): Same.
        (rewrite_commutative_reductions_out_of_ssa): Same.
        * passes.c (execute_function_todo): Call verify_ssa for every pass
        in the LNO.  Invoke verify_loop_closed_ssa with an extra argument.
        * tree-flow.h (verify_loop_closed_ssa): Update declaration.
        * tree-parloops.c (parallelize_loops): Invoke verify_loop_closed_ssa
        with an extra argument.
        * tree-ssa-loop-manip.c (check_loop_closed_ssa_stmt): Same.  Call
        verify_ssa only when the extra argument is true.
        (gimple_duplicate_loop_to_header_edge): Invoke verify_loop_closed_ssa
        with an extra argument.
        (tree_transform_and_unroll_loop): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * passes.c (execute_function_todo): Call verify_loop_closed_ssa
        for all the passes of the LNO having LOOP_CLOSED_SSA.
        * tree-if-conv.c (pass_if_conversion): Remove TODO_verify_loops.
        * tree-loop-distribution.c (pass_loop_distribution): Same.
        * tree-pass.h (TODO_verify_loops): Removed.
        * tree-ssa-loop.c (pass_tree_loop_init): Same.
        (pass_lim): Same.
        (pass_tree_unswitch): Same.
        (pass_predcom): Same.
        (pass_vectorize): Same.
        (pass_linear_transform): Same.
        (pass_graphite_transforms): Same.
        (pass_iv_canon): Same.
        (pass_complete_unroll): Same.
        (pass_complete_unrolli): Same.
        (pass_parallelize_loops): Same.
        (pass_loop_prefetch): Same.
        (pass_iv_optimize): Same.

2010-04-06  Changpeng Fang  <changpeng.fang@amd.com>

        PR middle-end/32824
        * passes.c (init_optimization_passes): Move pass_lim before
        pass_copy_prop and pass_dce_loop.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        PR target/43667
        * config/i386/i386.c (bdesc_multi_arg): Use OPTION_MASK_ISA_XOP
        instead of OPTION_MASK_ISA_AVX for __builtin_ia32_vpermil2p*.
        (ix86_expand_args_builtin): Use V*_FTYPE_* enum codes instead of
        MULTI_* defines for 4 argument vpermil2p* builtins.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (x86_maybe_negate_const_int): Declare.
        * config/i386/i386.c (x86_maybe_negate_const_int): New.
        (x86_output_mi_thunk): Use x86_maybe_negate_const_int.
        * config/i386/i386.md (*add<mode>_1, *addsi_1_zext, *addhi_1,
        *addhi_1_lea, *addqi_1, *addqi_1_lea, *addqi_1_slp, *add<mode>_2,
        *addsi_2_zext, *addhi_2, *addqi_2, *add<mode>_3, *addsi_3_zext,
        *addhi_3, *addqi_3,*add<mode>_5, *addhi_5, *addqi_5):
        Use x86_maybe_negate_const_int to output insn mnemonic.
        (*adddi_4, *addsi_4, *addhi_4, *addqi_4): Ditto.  Remove overflow
        check from instruction predicate.  Update comments.
        * config/i386/sync.md (sync_add<mode>): Use
        x86_maybe_negate_const_int to output insn mnemonic.

2010-04-06  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/42906
        * tree-ssa-dce.c (mark_control_dependent_edges_necessary): Add
        IGNORE_SELF argument.  Set visited_control_parents for fully
        processed BBs.
        (find_obviously_necessary_stmts): Update call of
        mark_control_dependent_edges_necessary.
        (propagate_necessity): Likewise.  Handle PHI edges more curefully.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md: Remove comment about 'e' and 'E'
        operand modifier.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43627
        * tree-vrp.c (extract_range_from_unary_expr): Widenings
        of [1, +INF(OVF)] go to [1, +INF(OVF)] of the wider type,
        not varying.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        * BASE-VER: Change to 4.6.0.

        PR target/43638
        * config/i386/i386.c (print_operand): Remove 'e' and 'E' code
        handling.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43661
        * fold-const.c (fold_comparison): Handle X * 0 CMP 0.

2010-04-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/invoke.texi (Optimize Options): Document that LTO
        won't remove object access purely due to incompatible
        declarations.

2010-04-04  Matthias Klose  <doko@ubuntu.com>

        * graphite-sese-to-poly.c (translate_scalar_reduction_to_array):
        Initialize variable.

2010-04-03  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42509
        * alias.c (nonoverlapping_memrefs_p): For spill-slot accesses
        require a non-NULL MEM_OFFSET.

2010-04-02  Steven Bosscher  <steven@gcc.gnu.org>

        * ada/gcc-interface/Make-lang.in, alias.c, attribs.c, auto-inc-dec.c,
        basic-block.h, bb-reorder.c, calls.c, c-common.c, cgraph.h,
        collect2.h, config/alpha/alpha.c, config/alpha/alpha.md,
        config/alpha/predicates.md, config/arm/arm.md,
        config/arm/lib1funcs.asm, config/arm/neon-schedgen.ml,
        config/avr/avr.c, config/avr/avr.md, config/bfin/bfin.c,
        config/darwin9.h, config/darwin.c, config/darwin.h,
        config/h8300/h8300.c, config/i386/cpuid.h, config/i386/cygming.h,
        config/i386/cygwin.h, config/i386/mingw32.h, config/i386/msformat-c.c,
        config/i386/sol2-10.h, config/i386/xopintrin.h, config/ia64/ia64.c,
        config/ia64/ia64.md, config/ia64/sync.md, config/mep/mep.c,
        config/mips/mips.md, config/mn10300/mn10300.c,
        config/mn10300/mn10300.h, config/pa/pa.c, config/pa/pa.md,
        config/rs6000/aix.h, config/rs6000/dfp.md,
        config/rs6000/rs6000-builtin.def, config/rs6000/rs6000-c.c,
        config/rs6000/vector.md, config/rtems.h, config/rx/rx.md,
        config/s390/s390.md, config/sol2-c.c, config/sparc/sol2-bi.h,
        config/sparc/sol2-gas.h, config/sparc/sparc.h, config/sparc/sparc.md,
        config/sparc/sparc-protos.h, config/spu/spu.c, config/spu/spu-c.c,
        config/t-darwin, convert.c, c.opt, c-opts.c, cp/Make-lang.in,
        c-pretty-print.c, c-typeck.c, df-core.c, df-scan.c, diagnostic.c,
        diagnostic.h, doc/cppopts.texi, doc/cpp.texi, doc/extend.texi,
        doc/gimple.texi, doc/languages.texi, doc/plugins.texi, doc/rtl.texi,
        doc/standards.texi, doc/tree-ssa.texi, doc/trouble.texi, dominance.c,
        fold-const.c, fortran/Make-lang.in, fwprop.c, gcc-plugin.h,
        gensupport.c, gimple.h, gimple-iterator.c, graphite.c,
        graphite-clast-to-gimple.c, graphite-clast-to-gimple.h,
        graphite-dependences.c, graphite-poly.c, graphite-poly.h,
        graphite-ppl.c, graphite-ppl.h, graphite-scop-detection.c,
        graphite-sese-to-poly.c, graphite-sese-to-poly.h, ifcvt.c, intl.c,
        intl.h, ipa.c, ipa-cp.c, ipa-inline.c, ipa-prop.c, ipa-prop.h,
        ipa-pure-const.c, ipa-reference.c, ipa-type-escape.c, ira-color.c,
        ira-conflicts.c, ira-lives.c, java/Make-lang.in, lambda-code.c,
        loop-invariant.c, lto/Make-lang.in, lto-streamer.h, lto-streamer-in.c,
        objc/Make-lang.in, objcp/Make-lang.in, omp-low.c, optc-gen.awk,
        opt-functions.awk, opth-gen.awk, params.def, passes.c,
        postreload-gcse.c, print-tree.c, recog.c, regrename.c, reload.h,
        rtl.def, sched-int.h, sched-rgn.c, sel-sched-dump.c, sese.c, sese.h,
        store-motion.c, stor-layout.c, tree-cfgcleanup.c, tree-chrec.c,
        tree-complex.c, tree-data-ref.c, tree.def, tree-eh.c, tree-flow.h,
        tree-flow-inline.h, tree.h, tree-loop-distribution.c, tree-outof-ssa.c,
        tree-parloops.c, tree-pass.h, tree-predcom.c, tree-profile.c,
        tree-scalar-evolution.c, tree-ssa-address.c, tree-ssa-alias.c,
        tree-ssa-coalesce.c, tree-ssa-copy.c, tree-ssa-dce.c, tree-ssa-dom.c,
        tree-ssa-dse.c, tree-ssa-loop-im.c, tree-ssa-loop-ivcanon.c,
        tree-ssa-loop-manip.c, tree-ssa-math-opts.c, tree-ssa-operands.c,
        tree-ssa-pre.c, tree-ssa-sccvn.c, tree-ssa-structalias.c,
        tree-ssa-uncprop.c, tree-tailcall.c, tree-vect-data-refs.c,
        tree-vect-loop.c, tree-vectorizer.h, tree-vect-slp.c, tree-vrp.c,
        unwind-dw2-fde-darwin.c, varpool.c: Update copyright years.

2010-04-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        PR other/43620
        * doc/install.texi (Prerequisites): Bump Automake version to 1.11.1.
        * aclocal.m4: Regenerate.

2010-04-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43629
        * tree-ssa-ccp.c (likely_value): Reset all_undefined_operands
        if we have seen a constant value.

2010-04-02  Joseph Myers  <joseph@codesourcery.com>

        * read-rtl.c (read_rtx_1): Give an error for EOF while looking for ']'.

2010-04-02  Richard Earnshaw  <rearnsha@arm.com>

        PR target/43469
        * arm.c (legitimize_tls_address): Adjust call to
        gen_tls_load_dot_plus_four.
        (arm_note_pic_base): New function.
        (arm_cannot_copy_insn_p): Use it.
        * thumb2.md (tls_load_dot_plus_four): Rework to avoid use of '+' in
        constraint.

2010-04-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        PR bootstrap/43531

        Revert:
        2009-09-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.in ($(out_object_file)): Depend on
        gt-$(basename $(notdir $(out_file))).h.

2010-04-01  Ralf Corsépius <ralf.corsepius@rtems.org>

        * config.gcc (lm32-*-rtems*): Add t-lm32.

2010-04-01  Joel Sherrill <joel.sherrill@oarcorp.com>

        * config.gcc: Add lm32-*-rtems*.
        * config/lm32/rtems.h: New file.

2010-04-01  Dave Korn  <dave.korn.cygwin@gmail.com>

        PR target/42609
        * config/i386/cygwin.h (CXX_WRAP_SPEC): Disable spec when -mno-cygwin.

2010-04-01  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (output_compilation_unit_header): For
        -gdwarf-4 use version 4 instead of version 3.
        (output_line_info): For version 4 and above emit additional
        maximum ops per insn header field.
        (DWARF_LINE_DEFAULT_MAX_OPS_PER_INSN): Define.

        * dwarf2out.c (is_c_family, is_java): Remove.
        (lower_bound_default): New function.
        (add_bound_info, gen_descr_array_type_die): Use it.

2010-04-01  Dodji Seketeli  <dodji@redhat.com>

        PR debug/43325
        * dwarf2out.c (gen_variable_die): Allow debug info for variable
        re-declaration when it happens in a function.

2010-04-01  Aldy Hernandez  <aldyh@redhat.com>

        * cgraph.c (cgraph_add_function_insertion_hook): Update comment.
        (cgraph_remove_function_insertion_hook): Same.
        (cgraph_call_function_insertion_hooks): Same.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43614
        * tree-ssa-address.c (copy_mem_ref_info): Copy TREE_SIDE_EFFECTS
        and TREE_THIS_VOLATILE.
        (copy_ref_info): Likewise.
        * tree-ssa-operands.c (get_tmr_operands): Check TREE_THIS_VOLATILE.
        * tree.c (build6_stat): Ignore side-effects of all but arg5
        for TARGET_MEM_REF.  Set TREE_THIS_VOLATILE from arg5 of
        TARGET_MEM_REF.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43607
        * ipa-type-escape.c (check_call): Do not access non-existing
        arguments.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43602
        Revert
        2010-03-30  Seongbae Park <seongbae.park@gmail.com>
                    Jack Howarth <howarth@bromo.med.uc.edu>

        * tree-profile.c (tree_init_ic_make_global_vars): Make static
        variables TLS.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Prerequisites): Document libelf usability on
        IRIX 5/6 and Solaris 2.
        (Specific, i?86-*-solaris2.10): No 64-bit default configuration.
        Update GNU as, GNU ld requirements.
        (Specific, *-*-solaris2*): Document Solaris 7 obsoletion, removal.
        Document Sun Studio compiler download.
        Update and simplify as, ld recommendations.
        (Specific, *-*-solaris2.7): Note obsoletion, removal.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (i[34567]86-*-solaris2*): Default with_arch_32,
        with_tune_32 to pentium4.

2010-04-01  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/cpuid.h (__get_cpuid_max): Move misplaced comment.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, mips-sgi-irix5): Document IRIX 5
        obsoletion, removal.
        Update IDO URL.
        Document GNU as requirement.
        Update configure requirements.
        (Specific, mips-sgi-irix6): Document IRIX 6 < 6.5 obsoletion, removal.
        Recomment IRIX 6.5.18+.
        Document IDF/IDL requirement.
        Document GNU as requirement.
        Document GNU ld bootstrap failure.
        Remove freeware.sgi.com reference.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, alpha*-dec-osf*): Document Tru64
        UNIX V4.0, V5.0 obsoletion, removal.
        Remove --with-gc=simple reference.
        Update VM requirements during bootstrap.
        Remove -oldas bootstrap description.
        Update binutils reference.
        Remove comparison failure note.

2010-03-31  Richard Guenther  <rguenther@suse.de>
            Zdenek Dvorak  <ook@ucw.cz>
            Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43464
        * tree-ssa-copy.c (init_copy_prop): Handle loop close phi nodes
        with multiple arguments.
        (execute_copy_prop): Remove call to rewrite_into_loop_closed_ssa.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-dependences.c (print_pddr): Call print_pdr with an
        extra argument.
        * graphite-poly.c (debug_pdr): Add an extra argument for the
        verbosity level.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (print_pbb): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_cloog): Same.
        (debug_pbb_domain): Same.
        (debug_pbb): Same.
        (print_pdrs): Same.
        (debug_pdrs): Same.
        (debug_scop_context): Same.
        (debug_scop): Same.
        (debug_cloog): Same.
        (print_scop_params): Same.
        (debug_scop_params): Same.
        (print_iteration_domain): Same.
        (print_iteration_domains): Same.
        (debug_iteration_domain): Same.
        (debug_iteration_domains): Same.
        (print_scattering_function): Same.
        (print_scattering_functions): Same.
        (debug_scattering_function): Same.
        (debug_scattering_functions): Same.
        * graphite-poly.h (debug_pdr): Update declaration.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (print_pbb): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_cloog): Same.
        (debug_pbb_domain): Same.
        (debug_pbb): Same.
        (print_pdrs): Same.
        (debug_pdrs): Same.
        (debug_scop_context): Same.
        (debug_scop): Same.
        (debug_cloog): Same.
        (print_scop_params): Same.
        (debug_scop_params): Same.
        (print_iteration_domain): Same.
        (print_iteration_domains): Same.
        (debug_iteration_domain): Same.
        (debug_iteration_domains): Same.
        (print_scattering_function): Same.
        (print_scattering_functions): Same.
        (debug_scattering_function): Same.
        (debug_scattering_functions): Same.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.c (print_scattering_function_1): New.
        (print_scattering_function): Call it.
        (print_scop_params): Remove spaces at the end of lines.
        (print_cloog): New.
        (debug_cloog): New.
        * graphite-poly.h (print_cloog): Declared.
        (debug_cloog): Declared.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (graphite_loop_normal_form): Add the IV bump
        in loop->header.
        * tree-flow.h (canonicalize_loop_ivs): Updated declaration.
        * tree-parloops.c (gen_parallel_loop): Add the IV bump in loop->latch.
        * tree-ssa-loop-manip.c (canonicalize_loop_ivs): Add a new parameter
        to switch between adding the IV bump in loop->latch or in loop->header.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.c (print_scattering_function): Pretty print following
        the scoplib format.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (dump_gbb_cases): Same.
        (dump_gbb_conditions): Same.
        (print_pdrs): Same.
        (print_pbb): Same.
        (print_scop_params): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_pbb_body): New.
        (lst_indent_to): New.
        (print_lst): Start new lines with a #.
        * graphite-poly.h (pbb_bb): New.
        (pbb_index): Use pbb_bb.
        * graphite-ppl.c (ppl_print_powerset_matrix): Print the number of
        disjuncts.
        * tree-data-ref.c (dump_data_reference): Start new lines with a #.

2010-03-31  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (size_of_die): For -gdwarf-4 use
        uleb128 size instead of fixed 1 or 2 for dw_val_class_loc
        and 0 instead of 1 for dw_val_class_flag.
        (value_format): For -gdwarf-4 use DW_FORM_sec_offset for
        dw_val_class_range_list, dw_val_class_loc_list,
        dw_val_class_lineptr and dw_val_class_macptr, use
        DW_FORM_flag_present for dw_val_class_flag and
        DW_FORM_exprloc for dw_val_class_loc.
        (output_die): For -gdwarf-4 print dw_val_class_loc
        size as uleb128 instead of 1 or 2 bytes and don't print
        anything for dw_val_class_flag.

        * var-tracking.c (vt_init_cfa_base): Use cselib_lookup_from_insn
        instead of cselib_lookup following by tweaking locs->setting_insn.

        PR bootstrap/43596
        * cselib.c (cselib_process_insn): Clear cselib_current_insn
        even before returning from label, setjmp call or volatile asm
        handling.

2010-03-31  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43600
        * cgraphunit.c (cgraph_output_in_order): Do not allocate
        temporary data on stack.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sparc/sysv4.h (PUSHSECTION_FORMAT): Remove undef.
        (PUSHSECTION_ASM_OP): Remove.
        (POPSECTION_ASM_OP): Remove.
        (PUSHSECTION_FORMAT): Remove.
        * config/sol2.h (PUSHSECTION_FORMAT): Define.
        * config/sparc/sol2.h [!USE_GAS] (PUSHSECTION_FORMAT): Redefine.
        * config/sol2.c (solaris_output_init_fini): Use it.

2010-03-31  Jie Zhang  <jie@codesourcery.com>

        PR 43574
        * opt-functions.awk (var_type_struct): Use signed char type
        for simple variables.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sol2.c: Include output.h.
        (solaris_assemble_visibility): New function.
        * config/t-sol2 (sol2.o): Add output.h dependency.
        * config/sol2-protos.h (solaris_assemble_visibility): Declare.
        * config/sol2.h [!USE_GAS] (TARGET_ASM_ASSEMBLE_VISIBILITY):
        Redefine.

2010-03-31  Jakub Jelinek  <jakub@redhat.com>

        PR target/43580
        * config/arm/arm.c (arm_save_coproc_regs): Use Pmode instead of
        V2SImode or XFmode on PRE_DEC.

        PR debug/43557
        * cfgexpand.c (expand_debug_expr): Handle VOIDmode mode like
        BLKmode.

2010-03-31  Jie Zhang  <jie@codesourcery.com>

        PR 43562
        * reload.h (caller_save_initialized_p): Declare.
        * toplev.c (backend_init_target): Don't call
        init_caller_save but set caller_save_initialized_p to false.
        * caller-save.c (caller_save_initialized_p): Define.
        (init_caller_save): Check caller_save_initialized_p.
        * ira.c (ira): Call init_caller_save if flag_caller_saves.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/39048
        * config.gcc (i[34567]86-*-solaris2*): Add i386/t-fprules-softfp
        and soft-fp/t-softfp to tmake_file.
        * config/i386/sol2.h (LIBGCC2_HAS_TF_MODE): Redefine.
        (LIBGCC2_TF_CEXT): Define.
        (TF_SIZE): Define.

2010-03-30  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42977
        * cselib.c (n_useless_values): Document handling of debug locs.
        (n_useless_debug_values, n_debug_values): New variables.
        (new_elt_loc_list): Don't add to debug values, keep count.
        (promote_debug_loc): New.
        (cselib_reset_table): Zero new variables.
        (entry_and_rtx_equal_p): Promote debug locs.
        (discard_useless_locs): Increment n_useless_debug_values for
        debug values.
        (remove_useless_values): Adjust n_useless_values and n_debug_values
        with n_useless_debug_values.
        (add_mem_for_addr): Promote debug locs.
        (cselib_lookup_mem): Likewise.
        (cselib_lookup_addr): Renamed to...
        (cselib_lookup_addr_1): ... this.  Promote debug locs.  Don't call...
        (cselib_log_lookup): ... this.  Turn into...
        (cselib_lookup_addr): ... new wrapper.
        (cselib_lookup_from_insn): New.
        (cselib_invalidate_regno): Increment n_useless_debug_values for
        debug values.
        (cselib_invalidate_mem): Likewise.
        (cselib_process_insn): Take n_deleted and n_debug_values into
        account to guard remove_useless_value call.
        (cselib_finish): Zero n_useless_debug_values.
        * cselib.h (cselib_lookup_from_insn): Declare.
        * sched-deps.c (sched_analyze_1): Use cselib_lookup_from_insn.
        (sched_analyze_2): Likewise.

2010-03-30  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (use_narrower_mode_test, use_narrower_mode): New
        functions.
        (adjust_mems): Replace narrowing SUBREG of expression containing
        just PLUS, MINUS, MULT and ASHIFT of registers and constants
        with operations in the narrower mode.

        PR debug/43593
        * var-tracking.c (dataflow_set_clear_at_call): Invalidate just
        regs_invalidated_by_call instead all call_used_reg_set registers.

2010-03-30  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43430
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Replace type
        pointer comparisons with types_compatible_p.
        * tree-vect-stmts.c (vectorizable_call): Same.
        (vectorizable_condition): Same.

2010-03-30  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_emit_prologue): Omit issuing a dynamic
        stack check if the mask would be zero.

2010-03-30  Seongbae Park <seongbae.park@gmail.com>
            Jack Howarth <howarth@bromo.med.uc.edu>

        * tree-profile.c (tree_init_ic_make_global_vars): Make static
        variables TLS.

2010-03-30  Joseph Myers  <joseph@codesourcery.com>

        PR other/25232
        * libgcc-std.ver (GCC_4.5.0): Define version.  Include __unordxf2
        and __unordtf2.
        * config/bfin/libgcc-bfin.ver (GCC_4.5.0): Define version.
        Include ___unordxf2 and ___unordtf2.
        * config/i386/libgcc-glibc.ver: Do not define inheritance from
        GCC_4.4.0 here.

2010-03-30  Tarik Graba  <tarik.graba@telecom-paristech.fr>

        * config/lm32/t-lm32: New file.
        * config.gcc: Use the above file when targetting lm32.

2010-03-28  Duncan Sands  <baldrick@free.fr>

        * Makefile.in (PLUGIN_HEADERS): Add except.h.

2010-03-29  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43431
        * tree-vect-loop.c (vect_estimate_min_profitable_iters):
        Improve vectorization cost model diagnostic.

2010-03-29  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43436
        * tree-vect-data-refs.c (vect_analyze_data_refs): When
        compute_data_dependences_for_loop returns false, early exit
        and output an extra diagnostic for the failed data reference
        analysis.

2010-03-29  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43560
        * tree-ssa-loop-im.c (ref_always_accessed_p): Add store_p parameter.
        (can_sm_ref_p): Treat stores to readonly locations as trapping.

2010-03-29  Jie Zhang  <jie@codesourcery.com>

        PR 43564
        * toplev.c (process_options): Set optimization_default_node
        and optimization_current_node.
        * opts.c (decode_options): Don't set optimization_default_node
        and optimization_current_node.

2010-03-29  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config/rtems.h: Abandon -qrtems_debug.

2010-03-28  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/43505
        * cgraph.c (cgraph_clone_node): When clonning a clone, replacement
        map should not be copied.

2010-03-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/41674
        * cgraphunit.c (cgraph_build_static_cdtor): If target doesn't have
        cdtors, set DECL_PRESERVE_P.
        * ipa.c (cgraph_externally_visible_p): Return true if declaration
        should be preseved.

2010-03-27  Uros Bizjak  <ubizjak@gmail.com>

        PR tree-optimization/43528
        * stor-layout.c (place_field): Check that constant fits into
        unsigned HWI when skipping calculation of MS bitfield layout.

2010-03-27  Jan Hubicka  <jh@suse.cz>

        PR middle-end/43391
        * varasm.c (make_decl_rtl): Deal with COMMON flag to make
        notice_global_symbol work.

2010-03-27  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (dwarf2_debug_hooks): Use dwarf2out_function_decl
        instead of dwarf2out_decl.
        (struct var_loc_node): Remove section_label field.
        (dwarf2out_function_decl): New function.
        (dwarf2out_var_location): Don't set section_label field.
        (dwarf2out_begin_function): Don't empty decl_loc_table here.

2010-03-26  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR tree-optimization/43544
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_VECTORIZED_FUNCTION):
        First argument for builtin vectorized function hook is now a
        tree to be able to distinguish between machine specific and
        standard builtins.
        * targhooks.c (default_builtin_vectorized_function): Ditto.
        * targhooks.h (default_builtin_vectorized_function): Ditto.
        * target.h (struct gcc_target): Ditto.
        * tree-vect-stmts.c (vectorizable_function): Ditto.
        * config/i386/i386.c (ix86_builtin_vectorized_function): Ditto.
        * config/rs6000/rs6000.c (rs6000_builtin_vectorized_function):
        Ditto.

2010-03-26  Joseph Myers  <joseph@codesourcery.com>

        PR c/43381
        * c-decl.c (get_parm_info): Assert that decl going in OTHERS has a
        nested binding iff it is a FUNCTION_DECL.
        (store_parm_decls_newstyle): Pass nested=true to bind for
        FUNCTION_DECLs amongst parameters.

2010-03-26  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (vt_expand_loc_callback): Don't run
        cselib_expand_value_rtx_cb in dummy mode if
        cselib_dummy_expand_value_rtx_cb returned false.

        * var-tracking.c (emit_note_insn_var_location): For one part
        notes with offset 0, don't add EXPR_LIST around the location.
        * dwarf2out.c (loc_descriptor, dw_loc_list_1,
        add_location_or_const_value_attribute): Adjust for that change.

        PR debug/43540
        * dwarf2out.c (reg_save): For DW_CFA_expression put regnum
        into first operand and location into second.
        (dw_cfi_oprnd1_desc): Return dw_cfi_oprnd_reg_num instead of
        dw_cfi_oprnd_loc for DW_CFA_expression.
        (dw_cfi_oprnd2_desc): Return dw_cfi_oprnd_loc for DW_CFA_expression.
        (output_cfa_loc, output_cfa_loc_raw): For DW_CFA_expression
        assume first argument is regnum and second argument is location.

2010-03-26  Uros Bizjak  <ubizjak@gmail.com>

        PR target/42113
        * config/alpha/alpha.md (*cmp_sadd_si): Change mode
        of scratch register to DImode.  Split to DImode comparison operator.
        Use SImode subreg of scratch register in the multiplication.
        (*cmp_sadd_sidi): Ditto.
        (*cmp_ssub_si): Ditto.
        (*cmp_ssub_sidi): Ditto.

2010-03-26  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43524
        * config/i386/i386.c (ix86_expand_prologue) [TARGET_STACK_PROBE]:
        Remove invalid assert and wrong comment.

2010-03-26  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43516
        * flags.h (final_insns_dump_p): New extern.
        * final.c (final_insns_dump_p): New variable.
        (rest_of_clean_state): Set it before -fdump-final-insns=
        dumping, clear afterwards.
        * print-rtl.c (print_rtx): If final_insns_dump_p don't dump
        MEM_ALIAS_SET on MEMs.

2010-03-26  David S. Miller  <davem@davemloft.net>

        * configure.ac: Fix sparc GOTDATA_OP bug check.
        * configure: Rebuild.

2010-03-26  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.md (cmptf_internal2): Correct comparison.

2010-03-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/tm.texi (Sections): Document TLS_COMMON_ASM_OP,
        TLS_SECTION_ASM_FLAG.

2010-03-25  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43511
        * config/i386/i386.c (ix86_code_end): Set DECL_WEAK if TARGET_MACHO.
        Clear first_function_block_is_cold.

        PR c/43385
        * gimplify.c (gimple_boolify): Only recurse on __builtin_expect
        argument if the argument is truth_value_p.

2010-03-24  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/constraints.md: Update copyright year for my changes.

        PR target/43484
        * config/rs6000/rs6000.c (rs6000_split_multireg_move): If r0 is
        used in reg+reg addressing, swap registers.

2010-03-24  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43293
        * target.h (struct gcc_target): Add code_end hook.
        * target-def.h (TARGET_ASM_CODE_END): Define to hook_void_void
        if not yet defined.
        (TARGET_ASM_OUT): Add TARGET_ASM_CODE_END.
        * toplev.c (compile_file): Call targetm.asm_out.code_end
        hook before unwind info/debug info output.
        * config/i386/winnt.c (i386_pe_file_end): Don't call ix86_file_end.
        * config/i386/linux.h (NEED_INDICATE_EXEC_STACK): Don't define.
        (TARGET_ASM_FILE_END): Define to file_end_indicate_exec_stack.
        * config/i386/linux64.h (NEED_INDICATE_EXEC_STACK): Don't define.
        (TARGET_ASM_FILE_END): Define to file_end_indicate_exec_stack.
        * config/i386/i386.c (ix86_file_end): Renamed to...
        (ix86_code_end): ... this.  Make static.  Don't call
        file_end_indicate_exec_stack.  Emit unwind info using
        final_start_function/final_end_function.
        (darwin_x86_file_end): Remove.
        (TARGET_ASM_CODE_END): Define.
        * config/i386/i386.h (TARGET_ASM_FILE_END,
        NEED_INDICATE_EXEC_STACK): Don't define.
        * config/i386/darwin.h (darwin_x86_file_end): Remove prototype.
        (TARGET_ASM_FILE_END): Define to darwin_file_end.
        * config/i386/i386-protos.h (ix86_file_end): Remove prototype.
        * doc/tm.texi (TARGET_ASM_CODE_END): Document.

        PR target/43498
        * config/i386/i386.c (x86_output_mi_thunk): Call final_start_function
        at the beginning and final_end_function at the end.
        * config/s390/s390.c (s390_output_mi_thunk): Likewise.

2010-03-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (i[34567]86-*-*): Handle Solaris 2/x86 TLS support
        and Sun as TLS syntax.
        (TLS_SECTION_ASM_FLAG) [on_solaris && !gas_flag]: Define.
        * configure: Regenerate.
        * config.in: Regenerate.
        * varasm.c (TLS_SECTION_ASM_FLAG): Define default.
        (default_elf_asm_named_section): Use it.
        * config/i386/i386.c (output_pic_addr_const): Lowercase @DTPOFF.
        (i386_output_dwarf_dtprel): Likewise.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @GOTTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @GOTNTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @INDNTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @NTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @TPOFF.
        (output_addr_const_extra): Likewise.
        * config/i386/i386.md (*tls_global_dynamic_32_gnu): Lowercase @TLSGD.
        (*tls_global_dynamic_64): Likewise.
        (*tls_local_dynamic_base_32_gnu): Lowercase @TLSLDM.
        (*tls_local_dynamic_base_64): Lowercase @TLSLD.

        * defaults.h (TLS_COMMON_ASM_OP): Provide default.
        (ASM_OUTPUT_TLS_COMMON): Use it.
        * config/i386/sol2-gas.h (TLS_COMMON_ASM_OP): Undef.

        PR target/38118
        * config.gcc (sparc*-*-solaris2*) [$gas=yes]: Add usegas.h to tm_file.
        * config/sparc/sol2.h (ASM_OUTPUT_ALIGNED_COMMON): Move ...
        * config/sol2.h (ASM_OUTPUT_ALIGNED_COMMON): ... here.
        * config/i386/sol2-10.h (ASM_OUTPUT_ALIGNED_COMMON): Redefine.
        * config/i386/sol2.h (TARGET_SUN_TLS): Redefine.
        (ASM_DECLARE_OBJECT_NAME) [!USE_GAS]: Redefine.

2010-03-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/i386/i386.c (override_options): Don't accept
        -mtls-dialect=sun any longer.
        * config/i386/i386.h (TARGET_SUN_TLS): Define as 0.
        * config/i386/i386.md (*tls_global_dynamic_32_sun): Remove.
        (*tls_local_dynamic_base_32_sun): Likewise.
        * config/i386/sol2.h (TARGET_SUN_TLS): Redefine.

2010-03-24  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43508
        * dwarf2out.c (mem_loc_descriptor): Don't ICE on
        VEC_{MERGE,SELECT,CONCAT,DUPLICATE}.

        PR debug/43479
        * ira.c (adjust_cleared_regs): New function.
        (update_equiv_regs): Adjust cleared_regs in DEBUG_INSNs.

        PR debug/19192
        PR debug/43479
        * cfgexpand.c (gimple_assign_rhs_to_tree): Also set TREE_BLOCK
        from gimple_block.
        * expr.c (expand_expr_real): Restore previous
        curr_insn_source_location and curr_insn_block after
        expand_expr_real_1 call.
        (expand_expr_real_1) <case SSA_NAME>: Call expand_expr_real
        instead of expand_expr_real_1.

2010-03-23  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/43413
        * ira-color.c (setup_allocno_available_regs_num): Count prohibited
        hard regs too.

2010-03-22  James E. Wilson  <wilson@codesourcery.com>

        PR target/43348
        * ia64.md (call_nogp, call_value_nogp, sibcall_nogp, call_gp,
        call_value_gp, sibcall_gp): Use 's' constraint not 'i'.

2010-03-22  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_target_string): Add -mfma.
        Fix a typo in comment.

2010-03-22  Mike Stump  <mikestump@comcast.net>

        PR target/23071
        * config/rs6000/rs6000.c (darwin_rs6000_special_round_type_align):
        Don't overly align based upon packed packed fields.

2010-03-22  Jason Merrill  <jason@redhat.com>

        * c-pretty-print.c (pp_c_specifier_qualifier_list) [VECTOR_TYPE]:
        Use () rather than [], and move before the element type.

2010-03-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/configfiles.texi (Configuration Files): Removed
        fixinc/Makefile*, intl/Makefile.*.
        * doc/makefile.texi: Fixed markup. Abstract from version
        control system used.
        (Makefile): Removed obsolete gcc/java/parse.y example.
        * doc/sourcebuild.texi: Likewise.
        (Top Level): Added config, gnattools, libdecnumber, libgcc,
        libgomp, libssp.  Removed fastjar.
        (Miscellaneous Docs): Clarify location.
        Added COPYING3, COPYING3.LIB.
        (Front End Directory): Moved Make-lang.in entry to new subsubsection.

2010-03-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/38085
        * config/i386/i386.c (x86_function_profiler)
        [!NO_PROFILE_COUNTERS]: Fix typo.
        * config/i386/gmon-sol2.c (_mcleanup) [__x86_64__]: Use call
        instead of callq.

2010-03-22  Janis Johnson  <janis187@us.ibm.com>
            Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/sourcebuild.texi (Test Directives): Split into six
        subsections, with most of the current text in new subsections
        Directives, Selectors, and Final Actions.
        (Directives): Split list of test directives into multiple
        subsubsections.
        (Selectors): Describe use and syntax of selectors.
        (Effective-Target Keywords): Describe all existing keywords.
        (Add Options): Describe features for dg-add-options.
        (Require Support): Describe variants of dg-require-support.
        (Final Actions): Describe commands to use in dg-final.

2010-03-22  Michael Matz  <matz@suse.de>

        PR middle-end/43475
        * recog.c (validate_replace_rtx_group): Replace also in
        REG_EQUAL and REG_EQUIV notes.

2010-03-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43390
        * tree-vect-stmts.c (get_vectype_for_scalar_type): Make
        sure vector extracts are type correct.

2010-03-22  Richard Guenther  <rguenther@suse.de>

        PR middle-end/40106
        * builtins.c (expand_builtin_pow): Expand pow (x, 1.5) as
        x * sqrt (x) even when optimizing for size if the target
        has native support for sqrt.

2010-03-22  Jakub Jelinek  <jakub@redhat.com>

        * varasm.c (make_decl_rtl_for_debug): Also clear
        flag_mudflap for the duration of make_decl_rtl call.

        PR debug/43443
        * var-tracking.c (add_cselib_value_chains): Remove ASM_OPERANDS
        locs from preserved VALUEs.

2010-03-21  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/42718
        * pa.md (movmemsi): Set align to one if zero.
        (movmemdi): Likewise.

2010-03-21  Richard Earnshaw  <rearnsha@arm.com>

        PR target/42321
        * arm.c (arm_output_epilogue): Correctly match VFP pop instructions
        with their corresponding prologue pushes.

2010-03-20  Andrew Pinski  <pinskia@gmail.com>

        PR target/43156
        * config/spu/spu.c (spu_expand_prologue): Don't emit NOTE_INSN_DELETED
        at the begining or end.
        (spu_expand_epilogue): Likewise.

2010-03-20  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/43438
        * combine.c (make_extraction): Properly zero-/sign-extend an
        extraction of the low part of a CONST_INT.  Also handle
        CONST_DOUBLE.

2010-03-19  Mike Stump  <mikestump@comcast.net>

        * config/i386/darwin.h (SUBTARGET32_DEFAULT_CPU): Add.
        * config/i386/i386.c (SUBTARGET32_DEFAULT_CPU): Add.
        (override_options): Use SUBTARGET32_DEFAULT_CPU.

2010-03-19  Andrew Pinski  <andrew_pinski@caviumnetworks.com>

        PR c/43211
        * c-decl.c (grokparms): Set arg_types to NULL_TREE if there was
        an error.

2010-03-19  Bernd Schmidt  <bernds@codesourcery.com>

        PR rtl-optimization/42258
        * ira-lives.c (check_and_make_def_conflict): Ignore conflict for a
        use that may match DEF.

        PR target/40697
        * optabs.c (avoid_expensive_constant): Use rtx_cost to find out
        the cost of loading the constant rather than assuming
        COSTS_N_INSNS (1).
        * config/arm/arm.c (thumb1_rtx_costs) <case CONST_INT>: If the
        outer code is AND, do the same tests as the andsi3 expander and
        return COSTS_N_INSNS (1) if and is cheap.

        * optabs.c (avoid_expensive_constant): Fix formatting.

2010-03-19  Michael Matz  <matz@suse.de>

        PR c++/43116
        * attribs.c (decl_attributes): When rebuilding a function pointer
        type use the same qualifiers as the original pointer type.

2010-03-19  Martin Jambor  <mjambor@suse.cz>

        * doc/gimple.texi (Logical Operators): Describe is_gimple_ip_invariant
        and is_gimple_ip_invariant_address.

2010-03-19  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        Revert
        2009-10-01  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/arm/arm.c (arm_override_options): Turn off
        flag_dwarf2_cfi_asm for AAPCS variants.

2010-03-19  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        PR target/43399
        * config/arm/arm.c (emit_multi_reg_push): Update comments.
        Use PRE_MODIFY instead of PRE_DEC.
        (emit_sfm): Use PRE_MODIFY instead of PRE_DEC.
        (vfp_emit_fstmd): Likewise.

2010-03-19  Michael Matz  <matz@suse.de>

        PR target/43305
        * builtins.c (expand_builtin_interclass_mathfn,
        expand_builtin_signbit): Use maybe_emit_unop_insn, emit libcalls
        if that fails.

2010-03-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43415
        * tree-ssa-pre.c (phi_translate): Split out worker to ...
        (phi_translate_1): ... this.
        (phi_translate): Move all caching here.  Cache all NARY
        and REFERENCE translations.

2010-03-19  David S. Miller  <davem@davemloft.net>

        With help from Eric Botcazou.
        * config/sparc/sparc.c: Include dwarf2out.h.
        (emit_pic_helper): Delete.
        (pic_helper_symbol_name): Delete.
        (pic_helper_emitted_p): Delete.
        (pic_helper_needed): New.
        (USE_HIDDEN_LINKONCE): Define to '1' if HAVE_GAS_HIDDEN else '0'.
        (get_pc_thunk_name): New.
        (load_pic_register): Remove 'delay_pic_helper' arg.  Use
        get_thunk_pc_name and ggc_strdup to generate PIC thunk symbol.
        Set pic_helper_needed to true.  Don't call emit_pic_helper.
        (sparc_expand_prologue): Update load_pic_register call.
        (sparc_output_mi_thunk): Likewise.
        (sparc_file_end): Emit a hidden comdat symbol for the PIC
        thunk if possible.  Output CFI information as needed.

2010-03-18  Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
            Jack Howarth <howarth@bromo.med.uc.edu>

        PR target/36399
        * config/i386/i386.h: Fix ABI on darwin x86-32.

2010-03-18  Aldy Hernandez  <aldyh@redhat.com>

        * tree.h: Declare make_decl_rtl_for_debug.
        * varasm.c (make_decl_rtl_for_debug): New.
        * dwarf2out.c (rtl_for_decl_location): Call it.
        * cfgexpand.c (expand_debug_expr): Call it.

2010-03-18  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43399
        * var-tracking.c (adjust_mems) <case POST_MODIFY>: Allow BLKmode
        mem_mode.

        PR bootstrap/43403
        * var-tracking.c (vt_init_cfa_base): Do nothing if
        cfa_base_rtx would be hard_frame_pointer_rtx or non-fixed register.

2010-03-18  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42873
        * var-tracking.c (canonicalize_vars_star): New.
        (dataflow_post_merge_adjust): Use it.

2010-03-18  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43058
        * var-tracking.c (non_suitable_const): New function.
        (add_uses): For DEBUG_INSNs with constants, don't record any
        value, instead just the constant value itself.
        (compute_bb_dataflow) <case MO_VAL_LOC>: If PAT_VAR_LOCATION_LOC
        is not VAR_LOC_UNKNOWN_P, set var to the constant.
        (emit_notes_in_bb): Likewise.
        (emit_note_insn_var_location): For onepart variables if
        cur_loc is a VOIDmode constant, use DECL_MODE.

2010-03-18  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/42450
        * cgraph.h (cgraph_redirect_edge_call_stmt_to_callee): Declare.
        * cgraphunit.c (cgraph_materialize_all_clones): Update calls in
        all non-clones.  Moved call redirection...
        (cgraph_redirect_edge_call_stmt_to_callee): ...to this new function.
        (cgraph_materialize_all_clones): Dispose of all
        combined_args_to_skip bitmaps.
        (verify_cgraph_node): Do not check for edges pointing to wrong
        nodes in inline clones.
        * tree-inline.c (copy_bb): Call
        cgraph_redirect_edge_call_stmt_to_callee.
        * ipa.c (cgraph_remove_unreachable_nodes): Call
        cgraph_node_remove_callees even when there are used clones.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/libgcc-glibc.ver: Make GCC_4.5.0 inherit GCC_4.4.0.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/43383
        * config/i386/libgcc-glibc.ver: Add __extendxftf2 to GCC_4.5.0
        for 32bit.

2010-03-18  Michael Matz  <matz@suse.de>

        PR middle-end/43419
        * builtins.c (expand_builtin_pow): Don't transform pow(x, 0.5)
        into sqrt(x) if we need to preserve signed zeros.

2010-03-18  Steven Bosscher  <steven@gcc.gnu.org>
            Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/43360
        * loop-invariant.c (move_invariant_reg): Remove the REG_EQUAL
        note if we don't know its invariant status.

2010-03-18  Michael Matz  <matz@suse.de>

        PR tree-optimization/43402
        * tree-cfgcleanup.c (cleanup_control_expr_graph): Don't follow
        PHI chains of ssa names registered for update.

2010-03-17  Peter Bergner  <bergner@vnet.ibm.com>

        PR target/42427
        * config/rs6000/rs6000.c (rs6000_split_multireg_move): Add support for
        non-offsettable and pre_modify update addressing.
        * config/rs6000/dfp.md (*movdd_hardfloat32): Make the "0", "1"
        and "2" alternatives "#".
        (*movdd_softfloat32): Make all alternatives "#";
        * config/rs6000/rs6000.md (DIFD): New define_mode_iterator.
        (*movdf_hardfloat32): Make the "0", "1" and "2" alternatives "#".
        (*movdf_softfloat32): Make all alternatives "#";
        (movdi): Use the new DIFD mode iterator to create a common splitter
        for movdi, movdf and movdd patterns.

2010-03-18  Shujing Zhao  <pearly.zhao@oracle.com>

        * common.opt (dumpdir): Remove redundant tab.

2010-03-17  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43347
        * tree-sra.c (create_access_replacement): Set TREE_NO_WARNING when the
        original base is DECL_ARTIFICIAL or DECL_IGNORED_P.

2010-03-17  Bernd Schmidt  <bernd.schmidt@analog.com>

        PR rtl-optimization/42216
        * regrename.c (create_new_chain): New function, broken out from...
        (scan_rtx_reg): ... here.  Call it.  Handle the case where we are
        appending a use to an empty chain.
        (build_def_use): Remove previous changes that convert OP_INOUT to
        OP_OUT operands; instead detect the case where an OP_INOUT operand
        uses a previously untracked register and create an empty chain for it.

2010-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/extend.texi (Function Attributes): Rewrite unfinished
        sentence in ms_abi documentation.

2010-03-17  Alan Modra  <amodra@gmail.com>

        * config/rs6000/linux64.opt (mprofile-kernel): Use profile_kernel var.
        * config/rs6000/linux64.h (TARGET_PROFILE_KERNEL): Define.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Don't use SET_PROFILE_KERNEL.
        * config/rs6000/rs6000.c (SET_PROFILE_KERNEL): Don't define.

2010-03-16  Richard Henderson  <rth@redhat.com>

        PR middle-end/43365
        * tree-eh.c (replace_goto_queue): Also replace in the eh_seq.
        (lower_try_finally): Save and restore eh_seq around the expansion
        of the try-finally.

2010-03-16  Aldy Hernandez  <aldyh@redhat.com>

        * graphite-sese-to-poly.c (split_reduction_stmt): Skip debug
        statements before splitting block.

2010-03-16  Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/sourcebuild.texi (Testsuites): Fix markup.
        Use pathnames relative to gcc/testsuite.
        (Test Directives): Move description of how timeout is determined.
        (Ada Tests): Favor gnat.exp over ada/acats/tests/gcc.
        (C Tests): Correct gcc.misc-tests directory.
        Framework tests now live in gcc.test-framework.

2010-03-16  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43379
        * tree-cfg.c (gimple_merge_blocks): When propagating virtual PHI
        operands make sure to merge SSA_NAME_OCCURS_IN_ABNORMAL_PHI properly.

2010-03-16  Aldy Hernandez  <aldyh@redhat.com>
            Alexandre Oliva  <aoliva@redhat.com>

        PR tree-optimization/42917
        * lambda-code.c (remove_iv): Skip debug statements.
        (lambda_loopnest_to_gcc_loopnest): Likewise.
        (not_interesting_stmt): Debug statements are not interesting.

2010-03-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43051
        PR debug/43092
        * cselib.c (cselib_preserve_constants,
        cfa_base_preserved_val): New static variables.
        (preserve_only_constants): New function.
        (cselib_reset_table): If cfa_base_preserved_val is non-NULL, don't
        clear its REG_VALUES.  If cselib_preserve_constants, don't
        empty the whole hash table, but preserve there VALUEs with constants,
        cfa_base_preserved_val and cfa_base_preserved_val plus constant.
        (cselib_preserve_cfa_base_value): New function.
        (cselib_invalidate_regno): Don't invalidate cfa_base_preserved_val.
        (cselib_init): Change argument to int bitfield.  Set
        cselib_preserve_constants to whether CSELIB_PRESERVE_CONSTANTS
        is in it.
        (cselib_finish): Clear cselib_preserve_constants and
        cfa_base_preserved_val.
        * cselib.h (enum cselib_record_what): New enum.
        (cselib_init): Change argument to int.
        (cselib_preserve_cfa_base_value): New prototype.
        * postreload.c (reload_cse_regs_1): Adjust cselib_init caller.
        * dse.c (dse_step1): Likewise.
        * cfgcleanup.c (thread_jump): Likewise.
        * sched-deps.c (sched_analyze): Likewise.
        * gcse.c (local_cprop_pass): Likewise.
        * simplify-rtx.c (simplify_replace_fn_rtx): Add argument to callback.
        If FN is non-NULL, call the callback always and whenever it returns
        non-NULL just return that.  Only do rtx_equal_p if FN is NULL.
        * rtl.h (simplify_replace_fn_rtx): Add argument to callback.
        * combine.c (propagate_for_debug_subst): Add old_rtx argument,
        compare from with old_rtx and if it isn't rtx_equal_p, return NULL.
        * Makefile.in (var-tracking.o): Depend on $(RECOG_H).
        * var-tracking.c: Include recog.h.
        (bb_stack_adjust_offset): Remove.
        (vt_stack_adjustments): Don't call it, instead just gather the
        adjustments using insn_stack_adjust_offset_pre_post on each bb insn.
        (adjust_stack_reference): Remove.
        (compute_cfa_pointer): New function.
        (hard_frame_pointer_adjustment, cfa_base_rtx): New static variables.
        (struct adjust_mem_data): New type.
        (adjust_mems, adjust_mem_uses, adjust_mem_stores, adjust_insn): New
        functions.
        (get_address_mode): New function.
        (replace_expr_with_values): Use it.
        (use_type): Don't do cselib_lookup for VAR_LOC_UNKNOWN_P.
        Use get_address_mode.  For cfa_base_rtx return MO_CLOBBER.
        (adjust_sets): Remove.
        (add_uses): Don't add extra MO_VAL_USE for cfa_base_rtx plus constant.
        Use get_address_mode.
        (get_adjusted_src): Remove.
        (add_stores): Don't call it.  Never reuse expr SET.  Don't add extra
        MO_VAL_USE for cfa_base_rtx plus constant.  Use get_address_mode.
        (add_with_sets): Don't call adjust_sets.
        (fp_setter, vt_init_cfa_base): New functions.
        (vt_initialize): Change return type to bool.  Move most of pool etc.
        initialization to the beginning of the function from end.  Pass
        CSELIB_RECORD_MEMORY | CSELIB_PRESERVE_CONSTANTS to cselib_init.
        If !frame_pointer_needed, call vt_stack_adjustment before mos
        vector is filled, call vt_init_cfa_base if argp/framep has been
        eliminated to sp.  If frame_pointer_needed and argp/framep has
        been eliminated to hard frame pointer, set
        hard_frame_pointer_adjustment and call vt_init_cfa_base after
        encountering fp setter in the prologue.  For MO_ADJUST, call
        log_op_type before pusing the op into mos vector, not afterwards.
        Call adjust_insn before cselib_process_insn/add_with_sets,
        call cancel_changes (0) afterwards.
        (variable_tracking_main_1): Adjust for vt_initialize calling
        vt_stack_adjustments and returning whether it succeeded or not.

2010-03-15  Aldy Hernandez  <aldyh@redhat.com>

        * graphite-sese-to-poly.c (rewrite_cross_bb_scalar_deps): Skip
        debug statements.

2010-03-15  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (dwarf2out_frame_debug): Don't assert drap_reg
        has been set.
        (based_loc_descr): Use DW_OP_fbreg for vdrap_reg even when
        drap_reg has not been set.

2010-03-15  Michael Matz  <matz@suse.de>

        PR middle-end/43300
        * tree-outof-ssa.c (emit_partition_copy): New argument sizeexp,
        use it to expand block copies.
        (insert_partition_copy_on_edge, insert_rtx_to_part_on_edge,
        insert_part_to_rtx_on_edge): Adjust callers of emit_partition_copy.
        (insert_value_copy_on_edge): Use store_expr for BLKmode values.

2010-03-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43367
        * tree-cfg.c (gimple_can_merge_blocks_p): Simplify PHI
        elimination check.

2010-03-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43317
        * ipa-struct-reorg.c (create_new_general_access): Update stmt.

2010-03-15  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43141
        * tree-sra.c (create_abstract_origin): New function.
        (modify_function): Call create_abstract_origin.

2010-03-15  Chris Demetriou  <cgd@google.com>

        * Makefile.in (stmp-int-hdrs): Don't chmod include/stdint.h if it
        wasn't copied.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43354
        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Do not
        call insert_out_of_ssa_copy for default definitions.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (my_long_long): Defined.
        (gcc_type_for_cloog_iv): Use it instead of long_long_integer_type_node.
        * graphite-sese-to-poly.c (my_long_long): Defined.
        (scop_ivs_can_be_represented): Use it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * doc/invoke.texi: Fix documentation of graphite-max-nb-scop-params,
        graphite-max-bbs-per-function, and loop-block-tile-size.
        * params.def (PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS): Replace "maximal"
        with "maximum".
        (PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION): Same.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (gcc_type_for_iv_of_clast_loop): Remove
        forward declaration.
        * graphite-sese-to-poly.c (reduction_phi_p): Remove FIXME comment.
        (add_upper_bounds_from_estimated_nit): New.
        (build_loop_iteration_domains): Use it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * doc/invoke.texi (PARAM_LOOP_BLOCK_TILE_SIZE): Document.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43306
        * tree-chrec.c (evolution_function_right_is_integer_cst): CHREC_RIGHT
        should be an INTEGER_CST.  Also handle CASE_CONVERT.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite.c (graphite_initialize): To bound the number of bbs per
        function, use PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION.
        * params.def (PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION): Declared.
        * doc/invoke.texi: Document it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (build_poly_scop): Do not return bool.
        * graphite-sese-to-poly.h (build_poly_scop): Same.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (build_poly_scop): Limit scops following
        the number of parameters in the scop.  Use as an upper bound
        PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS.
        * params.def (PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS): Declared.
        * doc/invoke.texi: Document it.

2010-03-13  Jerry Quinn  <jlquinn@optonline.net>

        * Makefile.in (TEXI_GCCINT_FILES): Remove c-tree.texi.
        * doc/c-tree.texi: Remove.
        * doc/generic.texi: Merge c-tree.texi here.
        * doc/gccint.texi (Trees): Remove menu entry.
        (c-tree.texi): Remove @include.
        * doc/rtl.texi (Reading RTL): Update pxref from Trees to GENERIC.
        * doc/languages.texi (Reading RTL): Ditto.

2010-03-12  Steve Ellcey  <sje@cup.hp.com>

        PR target/42869
        * config/ia64/sync.md (sync_compare_and_swap): Move memory fence.

2010-03-12  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR middle-end/42431
        * gcc/config/rs6000/rs6000.c (rs6000_emit_move): Delete band-aid
        code added to work around reload clobbering CONST insns.

2010-03-12  Jakub Jelinek  <jakub@redhat.com>

        * cselib.c (LONG_TERM_PRESERVED_VALUE_P): Remove.
        (cselib_preserve_definitely, cselib_clear_preserve): Remove.
        (cselib_preserve_only_values): Remove retain argument, don't
        traverse hash table with cselib_{preserve_definitely,clear_preserve}.
        * cselib.h (cselib_preserve_only_values): Remove retain argument.
        * var-tracking.c (micro_operation): Move insn field before union.
        Add DEF_VEC_O and DEF_VEC_ALLOC_O for this type.
        (struct variable_tracking_info_def): Remove n_mos field, change
        mos into a vector of micro_operations.
        (count_uses, count_uses_1, count_stores, count_with_sets): Remove.
        (bb_stack_adjust_offset, log_op_type, add_uses, add_stores,
        compute_bb_dataflow, emit_notes_in_bb): Adjust for VTI (bb)->mos
        changing into a vector.
        (add_with_sets): Likewise.  Ensure MO_VAL_USE uops from add_stores
        come before all other uops generated by add_stores.
        (vt_add_function_parameters): Adjust for cselib_preserve_only_values
        argument removal.
        (vt_initialize): Likewise.  Adjust for VTI (bb)->mos changing into
        a vector.  Run just one pass over the bbs instead of separate counting
        and computation phase.
        (vt_finalize): Free VTI (bb)->mos vector instead of array.

        PR debug/43329
        * tree-inline.c (remap_decls): Put old_var rather than origin_var
        into *nonlocalized_list vector.
        * dwarf2out.c (gen_formal_parameter_die): Call decl_ultimate_origin
        even if origin is non-NULL.
        (gen_variable_die): Likewise.
        (process_scope_var): Don't change origin.
        (gen_decl_die): Likewise.
        * tree-cfgcleanup.c (remove_forwarder_block): Check single_pred_p
        before adding new edges instead of after it, fix moving over
        debug stmts.

2010-03-11  David S. Miller  <davem@davemloft.net>

        * configure.ac (gcc_cv_as_cfi_advance_working): Skip a multiple
        of four.
        * configure: Rebuild.

2010-03-11  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43257
        * tree.c (assign_assembler_name_if_neeeded): New function.
        (free_lang_data_in_cgraph): Assembler name assignment moved to the
        above new function.
        * tree.h (assign_assembler_name_if_neeeded): Declare.
        * cgraphunit.c (cgraph_analyze_function): Create an assembler name for
        the function if needed.

2010-03-11  Chris Demetriou  <cgd@google.com>

        * Makefile.in (stmp-int-hdrs): Make include/unwind.h,
        include/stdint-gcc.h, and include/stdint.h world-readable.

2010-03-11  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43255
        * tree-vrp.c (process_assert_insertions_for): Do not insert
        asserts for trivial conditions.

2010-03-11  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR tree-optimization/43280
        * tree-ssa-math-opts.c (find_bswap_1): Modify symbolic number
        generation.  Move calculation of size out of the if branch.
        (find_bswap): Modify compare number generation.

2010-03-11  Richard Guenther  <rguenther@suse.de>

        PR lto/43200
        * lto-streamer-in.c (maybe_fixup_decls): Simplify.
        (input_gimple_stmt): Fixup handled component types during
        operand read.  Also fix up decls in ADDR_EXPRs.

2010-03-10  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sol2-bi.h (CC1_SPEC): Default to -mcpu=v9 for -m32.
        * config/sparc/t-sol2-64 (MULTILIB_DIRNAMES): Use sparcv8plus.

2010-03-10  Jan Hubicka  <jh@suse.cz>

        PR c/43288
        * ipa.c (function_and_variable_visibility) Normalize COMMON bits.
        * varasm.c (get_variable_section): Don't do that here...
        (make_decl_rtl): ... and here.
        (do_assemble_alias): Produce decl RTL.
        (assemble_alias): Likewise.

2010-03-10  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43290
        * reg-notes.def (REG_CFA_SET_VDRAP): New note.
        * dwarf2out.c (dwarf2out_frame_debug_expr): Remove rule 20 - setting
        of fde->vdrap_reg.
        (dwarf2out_frame_debug): Handle REG_CFA_SET_VDRAP note.
        (based_loc_descr): Only express drap or vdrap regno based expressions
        using DW_OP_fbreg when not optimizing.
        * config/i386/i386.c (ix86_get_drap_rtx): When not optimizing,
        make the vDRAP = DRAP assignment RTX_FRAME_RELATED_P and add
        REG_CFA_SET_VDRAP note.

2010-03-10  Alexander Monakov  <amonakov@ispras.ru>

        PR tree-optimization/43236
        * tree-loop-distribution.c (generate_memset_zero): Fix off-by-one
        error in calculation of base address in reverse iteration case.
        (generate_builtin): Take number of latch executions if the statement
        is in the latch.

2010-03-10  Andrey Belevantsev  <abel@ispras.ru>

        PR middle-end/42859
        * tree-eh.c: Include pointer-set.h.
        (lower_eh_dispatch): Filter out duplicate case labels and
        remove the unneeded edge when the label is unused.  Return
        true when some edges are removed.
        (execute_lower_eh_dispatch): When any lowering resulted in
        removing an edge, also delete unreachable blocks.

2010-03-10  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43287
        * config/rs6000/rs6000.c (rs6000_delegitimize_address): Handle
        UNSPEC_MACHOPIC_OFFSET.

2010-03-09  Andreas Schwab  <schwab@linux-m68k.org>

        PR target/43294
        * config/m68k/m68k.c (TARGET_DELEGITIMIZE_ADDRESS): Define.
        (m68k_delegitimize_address): New function.

2010-03-09  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43299
        * dwarf2out.c (const_ok_for_output_1): Return 1 for UNSPECs.

        PR debug/43299
        * var-tracking.c (adjust_sets): New function.
        (count_with_sets, add_with_sets): Use it.
        (get_adjusted_src): New inline function.
        (add_stores): Use it.

        PR debug/43304
        * var-tracking.c (vt_expand_loc_callback) <case SUBREG>: If dummy,
        call cselib_dummy_expand_value_rtx_cb instead of
        cselib_expand_value_rtx_cb.

        PR debug/43293
        * config/i386/t-i386 (i386.o): Depend on debug.h and dwarf2out.h.
        * config/i386/i386.c: Include debug.h and dwarf2out.h.
        (ix86_file_end): If dwarf2out_do_cfi_asm (), emit .cfi_startproc
        and .cfi_endproc around the pic thunks.
        (output_set_got): For TARGET_DEEP_BRANCH_PREDICTION pic, ensure
        all queued unwind info register saves are saved before the call.
        For !TARGET_DEEP_BRANCH_PREDICTION pic, ensure the call is
        considered as sp-=4 for unwind info and the pop as sp+=4 which
        also clobbers dest, but doesn't actually restore it.

        PR debug/43290
        * config/i386/i386.c (ix86_get_drap_rtx): Don't set
        RTX_FRAME_RELATED_P.

2010-03-09  Jie Zhang  <jie@codesourcery.com>

        * config/arm/arm.md (thumb_mulsi3_v6): Remove trailing
        whitespaces in output template.

2010-03-09  Jie Zhang  <jie@codesourcery.com>

        * ira-lives.c (check_and_make_def_use_conflict): Don't fall
        out array boundary.

2010-03-08  Jakub Jelinek  <jakub@redhat.com>

        * Makefile.in (check_gcc_parallelize): Run dg-torture.exp and
        builtins.exp in a separate job.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Use
        lower_bound_in_type and upper_bound_in_type.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Use sizetype
        instead of unsigned_type_node.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>
            Reza Yazdani  <reza.yazdani@amd.com>

        PR middle-end/43065
        * graphite-sese-to-poly.c (add_param_constraints): Insert bounds
        on pointer type parameters.

2010-03-08  Tobias Grosser  <grosser@fim.uni-passau.de>

        PR middle-end/42644
        PR middle-end/42130
        * graphite-clast-to-gimple.c (clast_to_gcc_expression): Also
        handle conversions from pointer to integers.
        (gcc_type_for_cloog_iv): Choose the smalles signed integer as an
        induction variable, to be able to work with code generated by CLooG.
        * graphite-sese-to-poly.c (scop_ivs_can_be_represented): New.
        (build_poly_scop): Bail out if we cannot codegen a loop.

2010-03-08  Tobias Grosser  <grosser@fim.uni-passau.de>

        * graphite-clast-to-gimple.c (translate_clast): Do not short-cut
        code generation with gloog_error.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * sese.c (expand_scalar_variables_ssa_name): Add new argument for type.
        Call fold_convert on all the returned values.
        (expand_scalar_variables_expr): Pass to
        expand_scalar_variables_ssa_name the type of the resulting expression.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-ppl.c (ppl_min_for_le_polyhedron): Renamed
        ppl_min_for_le_pointset.
        Use ppl_Pointset_Powerset_C_Polyhedron_minimize.
        * graphite-ppl.h (ppl_min_for_le_polyhedron): Update declaration.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-dependences.c (map_into_dep_poly): Removed.
        (dependence_polyhedron_1): Use combine_context_id_scat.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.h (struct poly_scattering): Add layout documentation.
        (struct poly_bb): Same.
        (combine_context_id_scat): New.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/42326
        * sese.c (name_defined_in_loop_p): Return false for default
        definitions.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (find_cloog_iv_in_expr): Simplify
        and clean up the logic.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Enabled: remove
        early return.

2010-03-08  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (remove_cselib_value_chains): Define only for
        ENABLE_CHECKING.
        (dataflow_set_preserve_mem_locs, dataflow_set_remove_mem_locs,
        delete_slot_part, emit_notes_for_differences_1): Don't call
        remove_cselib_value_chains here.
        (set_slot_part, emit_notes_for_differences_2): Don't call
        add_cselib_value_chains here.
        (preserved_values): New vector.
        (preserve_value): New function.
        (add_uses, add_stores, vt_add_function_parameters): Use it
        instead of cselib_preserve_value.
        (changed_values_stack): New vector.
        (check_changed_vars_0): New function.
        (check_changed_vars_1, check_changed_vars_2): Use it.
        (emit_notes_for_changes): Call set_dv_changed (*, false) on all
        changed_values_stack VALUEs.
        (vt_emit_notes): For all preserved_values call
        add_cselib_value_chains.  If ENABLE_CHECKING call
        remove_cselib_value_chains before verifying value_chains is empty.
        Initialize and free changed_values_stack.
        (vt_initialize): Initialize preserved_values.
        (vt_finalize): Free preserved_values.

2010-03-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43269
        * tree-ssa-dse.c (dse_possible_dead_store_p): Fix post-dom