2010-04-16 Doug Kwan <dougkwan@google.com>

[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * tree-ssa-reassoc.c (struct operand_entry): Add new field ID.
        (next_operand_entry_id): New static variable.
        (sort_by_operand_rank): Stabilize qsort comparator by using unique IDs.
        (add_to_ops_vec): Assigned unique ID to operand entry.
        (struct oecount_s): New field ID.
        (oecount_cmp): Stabilize qsort comparotor by using unique IDs.
        (undistribute_ops_list): Assign unique IDs to oecounts.
        (init_reassoc): reset next_operand_entry_id.

2010-04-16  Doug Kwan  <dougkwan@google.com>

        * config/i386/i386.md (*jcc_bt<mode>): Fix build breakage by adding
        missing left parenthesis.
        
2010-04-16  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*bt<mode>): Macroize insn from *btsi and
        *btdi_rex64 using SWI48 mode iterator.
        (*jcc_bt<mode>): Ditto from *jcc_btsi and *jcc_btdi_rex64.
        (*jcc_bt<mode>_mask): Ditto from *jcc_btsi_mask and
        *jcc_btdi_mask_rex64.

2010-04-16  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (tree_to_double_int): Convert to macro.
        * double-int.c (tree_to_double_int): Remove.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43762
        * dwarf2out.c (add_bound_info): Always call loc_list_from_tree
        with want_address 2 and in case a single element list might be
        possible, call it again with want_address 0.

2010-04-12  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/h8300/h8300.h (OK_FOR_U): Support 'U' constraint for H8300SX.

        * config/h8300/h8300.md (movqi_h8sx, movhi_h8sx, movsi_h8sx, 
        cmphi_h8300hs_znvc, cmpsi, addhi3_h8sx) : Emit instructions in
        #xx:3 and #xx:4 mode.

        * config/h8300/h8300.md (inverted load with HImode dest): Add
        support for H8300SX.

        * config/h8300/predicate.md (bit_operand): Allow immediate values that
        satisfy 'U' constraint.

2010-04-16  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
        flavor.
        * configure: Regenerate.
        * config.in: Regenerate.
        * doc/install.texi (Prerequisites): Document that Solaris 2 libelf
        works.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * tree.h (struct tree_decl_minimal): Move pt_uid ...
        (struct tree_decl_common): ... here.
        (DECL_PT_UID): Adjust.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43572
        * tree-ssa-alias.h (call_may_clobber_ref_p): Declare.
        * tree-ssa-alias.c (call_may_clobber_ref_p): Export.
        * tree-flow.h (is_call_clobbered): Remove.
        * tree-flow-inline.h (is_call_clobbered): Likewise.
        * tree-dfa.c (dump_variable): Do not dump call clobber state.
        * tree-nrv.c (dest_safe_for_nrv_p): Use the alias oracle.
        (execute_return_slot_opt): Adjust.
        * tree-tailcall.c (suitable_for_tail_opt_p): Remove
        check for call clobbered vars here.
        (find_tail_calls): Move tailcall verification to the
        proper place.

2010-04-16  Diego Novillo  <dnovillo@google.com>

        * doc/invoke.texi: Explain how are unrecognized -Wno- warnings
        handled.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/40603
        * config/arm/arm.md (cbranchqi4): New pattern.
        * config/arm/predicates.md (const0_operand,
        cbranchqi4_comparison_operator): New predicates.

2010-04-16  Richard Guenther  <rguenther@suse.de>

        * gimple-pretty-print.c (dump_gimple_phi): Dump alias info.
        (dump_gimple_stmt): Likewise.

2010-04-16  Bernd Schmidt  <bernds@codesourcery.com>

        * recog.h (struct recog_data): New field is_operator.
        (struct insn_operand_data): New field is_operator.
        * recog.c (extract_insn): Set recog_data.is_operator.
        * genoutput.c (output_operand_data): Emit code to set the
        is_operator field.
        * reload.c (find_reloads): Use it rather than testing for an
        empty constraint string.

        PR target/41514
        * config/arm/arm.md (cbranchsi4_insn): Renamed from "*cbranchsi4_insn".
        If the previous insn is a cbranchsi4_insn with the same arguments,
        omit the compare instruction.

        * config/arm/arm.md (addsi3_cbranch): If destination is a high
        register, inputs must be low registers and we need a low register
        scratch.  Handle alternative 2 like alternative 3.

2010-04-16  Jakub Jelinek  <jakub@redhat.com>

        * alias.c (memrefs_conflict_p): If x and y are the same VALUE,
        don't call get_addr on both.  If one expression is a VALUE and
        the other a REG, check VALUE's locs if the REG isn't among them.

2010-04-16  Christian Bruel  <christian.bruel@st.com>

        * config/sh/sh.h (sh_frame_pointer_required): New function.
        * config/sh/sh.h (TARGET_FRAME_POINTER_REQUIRED): New macro.
        (flag_omit_frame_pointer) Set.
        (MASK_ACCUMULATE_OUTGOING_ARGS) Define and Set.
        (rounded_frame_size): Adjust size with outgoing_args_size.
        (sh_set_return_address): Must return from stack pointer.
        * gcc/config/sh/sh.h (CAN_DEBUG_WITHOUT_FP): Define.
        (SUBTARGET_FRAME_POINTER_REQUIRED): Define.
        (ACCUMULATE_OUTGOING_ARGS): Define.
        * doc/invoke.texi (maccumulate-outgoing-args): Document for SH.
        * gcc/config/sh/sh.opt: (maccumulate-outgoing-args): New option.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43471
        * config/sh/sh.c (sh_legitimize_reload_address): Use
        MAYBE_BASE_REGISTER_RTX_P instead of BASE_REGISTER_RTX_P.
        Remove a unneeded check for offset_base.

2010-04-15  H.J. Lu  <hongjiu.lu@intel.com>

        * configure: Regenerated.

2010-04-15  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_call_save_register_used): Switch back
        to HARD_REGNO_NREGS.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * alias.c (alias_set_subset_of): Handle alias-set zero
        child properly.

2010-04-15  Mark Shinwell  <shinwell@codesourcery.com>
            Julian Brown  <julian@codesourcery.com>

        * config/arm/thumb2.md (thumb2_movsi_insn): Split ldr and str
        alternatives according to use of high and low regs.
        * config/arm/vfp.md (thumb2_movsi_vfp): Likewise.
        * config/arm/arm.h (CONDITIONAL_REGISTER_USAGE): Use high regs when
        optimizing for size on Thumb-2.

2010-04-15  Thomas Schwinge  <tschwinge@gnu.org>

        * config.gcc <i[34567]86-*-gnu*>: Handle softfp as for Linux.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (struct variable_info): Add
        is_fn_info flag.
        (new_var_info): Initialize it.
        (dump_constraints): Support printing last added constraints.
        (debug_constraints): Adjust.
        (dump_constraint_graph): Likewise.
        (make_heapvar_for): Check for NULL cfun.
        (get_function_part_constraint): New function.
        (get_fi_for_callee): Likewise.
        (find_func_aliases): Properly implement IPA PTA constraints.
        (process_ipa_clobber): New function.
        (find_func_clobbers): Likewise.
        (insert_into_field_list_sorted): Remove.
        (create_function_info_for): Properly allocate vars for IPA mode.
        Do not use insert_into_field_list_sorted.
        (create_variable_info_for): Properly generate constraints for
        global vars in IPA mode.
        (dump_solution_for_var): Always dump the solution.
        (set_uids_in_ptset): Initialize DECL_PT_UID if in ipa-mode.
        (find_what_var_points_to): Adjust.
        (pt_solution_set): Change.
        (pt_solution_ior_into): New function.
        (pt_solution_empty_p): Export.
        (pt_solution_includes_global): Adjust.
        (pt_solution_includes_1): Likewise.
        (pt_solutions_intersect_1): Likewise.
        (dump_sa_points_to_info): Check some invariants.
        (solve_constraints): Move constraint dumping ...
        (compute_points_to_sets): ... here.
        (ipa_pta_execute): ... and here.
        (compute_may_aliases): Do not re-compute points-to info
        locally if IPA info is available.
        (ipa_escaped_pt): New global var.
        (ipa_pta_execute): Properly implement IPA PTA.
        * tree-into-ssa.c (dump_decl_set): Support dumping
        decls not in referenced-vars.
        * tree-flow.h (struct gimple_df): Add ipa_pta flag.
        * tree-ssa-alias.c (ptr_deref_may_alias_decl_p): Adjust.
        (dump_points_to_solution): Likewise.
        * tree-dfa.c (dump_variable): Also dump DECL_PT_UID.
        * tree-inline.c (remap_ssa_name): Copy IPA points-to solution.
        (remap_gimple_stmt): Reset call clobber/use information if
        necessary.
        (copy_decl_to_var): Copy DECL_PT_UID.
        (copy_result_decl_to_var): Likewise.
        * tree.c (make_node_stat): Initialize DECL_PT_UID.
        (copy_node_stat): Copy it.
        * tree.h (DECL_PT_UID): New macro.
        (SET_DECL_PT_UID): Likewise.
        (DECL_PT_UID_SET_P): Likewise.
        (struct tree_decl_minimal): Add pt_uid member.
        * tree-ssa-alias.h (struct pt_solution): Add ipa_escaped flag.
        (pt_solution_empty_p): Declare.
        (pt_solution_set): Adjust.
        (ipa_escaped_pt): Declare.
        * cfgexpand.c (update_alias_info_with_stack_vars): Adjust.
        * gimple-pretty-print.c (pp_points_to_solution): New function.
        (dump_gimple_call): Dump call clobber/use information.
        * tree-dump.c (dump_option_value_in): Add TDF_ALIAS entry.
        * tree-pass.h (TDF_ALIAS): New dump option.
        * tree-pretty-print.c (dump_decl_name): Dump DECL_PT_UID if asked to.
        * doc/invoke.texi (-fipa-pta): Update documentation.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * Makefile.in (OBJS-common): Add gimple-fold.o.
        (gimple-fold.o): New rule.
        * tree.h (maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_addition): Move
        prototypes ...
        * gimple.h: ... here.
        * tree-flow.h (fold_stmt, fold_stmt_inplace, get_symbol_constant_value,
        may_propagate_address_into_dereference): Move prototypes ...
        * gimple.h: ... here.
        * tree-ssa-ccp.c (get_symbol_constant_value,
        may_propagate_address_into_dereference, maybe_fold_offset_to_array_ref,
        maybe_fold_offset_to_component_ref, maybe_fold_offset_to_reference,
        maybe_fold_offset_to_address, maybe_fold_stmt_indirect,
        maybe_fold_stmt_addition, maybe_fold_reference, get_maxval_strlen,
        ccp_fold_builtin, fold_gimple_assign, fold_gimple_cond,
        fold_gimple_call, fold_stmt_1, fold_stmt, fold_stmt_inplace,
        gimplify_and_update_call_from_tree): Move ...
        * gimple-fold.c: ... here.  New file.
        (ccp_fold_builtin): Rename to ...
        (gimple_fold_builtin): ... this.
        * tree-ssa-ccp.c (execute_fold_all_builtins): Adjust.

2010-04-15  Richard Guenther  <rguenther@suse.de>

        * fold-const.c (LOWPART, HIGHPART, BASE, encode, decode,
        fit_double_type, force_fit_type_double, add_double_with_sign,
        neg_double, mul_double_with_sign, lshift_double, rshift_double,
        lrotate_double, rrotate_double, div_and_round_double): Move ...
        * double-int.c: ... here.
        * tree.h (force_fit_type_double, fit_double_type, add_double_with_sign,
        add_double, neg_double, mul_double_with_sign, mul_double,
        lshift_double, rshift_double, lrotate_double, rrotate_double,
        div_and_round_double): Move prototypes ...
        * double-int.h: ... here.

2010-04-15  Bernd Schmidt  <bernds@codesourcery.com>

        PR target/43742
        * config/sh/sh.md (doloop_end_split, dect): Undo previous patch.  Use
        matching constraints to ensure inputs match the output.

2010-04-15  Kaz Kojima  <kkojima@gcc.gnu.org>

        PR target/43742
        * config/sh/sh.md (doloop_end_split): Remove "+r" constraint
        in an input-only operand.       

2010-04-15  Anatoly Sokolov  <aesok@post.ru>

        * double-int.h (HOST_BITS_PER_DOUBLE_INT): Define.
        (double_int_not, double_int_lshift, double_int_rshift): Declare.
        (double_int_negative_p): Convert to static inline function.
        * double-int.c (double_int_lshift, double_int_lshift): Add new function.
        (double_int_negative_p): Remove.
        * tree.h (lshift_double, rshift_double): 
        * tree.c (build_low_bits_mask): Clean up, use double_int_* functions.
        * fold-const.c (fold_convert_const_int_from_real,
        fold_convert_const_int_from_fixed, div_if_zero_remainder): (Ditto.).
        (lshift_double): Change type of arith argument to bool.
        (rshift_double): Change type of arith argument to bool. Correct
        comment.
        * expmed.c (mask_rtx, lshift_value): (Ditto.).

2010-04-14  Bernd Schmidt  <bernds@codesourcery.com>
        
        PR target/21803
        * ifcvt.c (cond_exec_process_if_block): Look for identical sequences
        at the start and end of the then/else blocks, and omit them from the
        conversion.
        * cfgcleanup.c (flow_find_cross_jump): No longer static.  Remove MODE
        argument; all callers changed.  Pass zero to old_insns_match_p instead.
        (flow_find_head_matching_sequence): New function.
        (old_insns_match_p): Check REG_EH_REGION notes for calls.
        * basic-block.h (flow_find_cross_jump,
        flow_find_head_matching_sequence): Declare functions.

2010-04-14  Jason Merrill  <jason@redhat.com>

        PR c++/36625
        * c-common.c (attribute_takes_identifier_p): New fn.
        * c-common.h: Declare it.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*divmod<mode>4): Remove stray "&&" from
        splitter condition.
        (*udivmod<mode>4): Ditto.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (maxmin_int): Rename code attribute from
        maxminiprefix and update all users.
        (maxmin_float): Ditto from maxminfprefix.
        (logic): Ditto from logicprefix.
        (absneg_mnemonic): Ditto from absnegprefix.
        * config/i386/mmx.md: Update all users of maxminiprefix,
        maxminfprefix and logicprefix for rename.
        * config/i386/sse.md: Ditto.
        * config/i386/sync.md (sync_<code><mode>): Update for
        logicprefix rename.

2010-04-14  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42966
        * diagnostics.c (diagnostic_report_diagnostic): Mark specially
        warnings converted to errors.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_adjust_cost): Remove set but not
        used insn_type variable.
        (function_value): Add ATTRIBUTE_UNUSED to dummy variable declaration
        to avoid set-but-not-used warning.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * df-core.c (df_ref_debug): Change format string placeholder
        from 0x%x to %#x.
        * dwarf2asm.c (dw2_asm_output_data_raw,
        dw2_asm_output_data_uleb128_raw, dw2_asm_output_data_uleb128,
        dw2_asm_output_data_sleb128_raw, dw2_asm_output_data_sleb128): Ditto.
        * dwarf2out.c (output_cfi, output_cfi_directive,
        dwarf2out_do_cfi_startproc, output_loc_sequence_raw,
        output_cfa_loc_raw, output_die, output_ranges, output_file_names):
        Ditto.
        * genattrtab.c (write_test_expr, write_attr_valueq): Ditto.
        * print-rtl.c (print_rtx): Ditto.

2010-04-14  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR middle-end/42694
        * builtins.c (expand_builtin_pow_root): New function to expand pow
        calls with exponents 0.25, 0.50, 0.75, 1./3., and 1./6. into a
        series of sqrt and cbrt calls under -ffast-math.
        (expand_builtin_pow): Call it.

2010-04-14  Michael Matz  <matz@suse.de>

        PR tree-optimization/42963
        * tree-cfg.c (touched_switch_bbs): New static variable.
        (group_case_labels_stmt): New function broken out from ...
        (group_case_labels): ... here, use the above.
        (start_recording_case_labels): Allocate touched_switch_bbs.
        (end_recording_case_labels): Deallocate it, call
        group_case_labels_stmt.
        (gimple_redirect_edge_and_branch): Remember index of affected BB.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*popcountsi2_cmp_zext): Remove mode attribute
        from insn template.

2010-04-14  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashlqi3_1_slp): New insn pattern.

2010-04-13  Jan Hubicka  <jh@suse.cz>

        * ipa-inline.c (cgraph_mark_inline_edge): Avoid double accounting
        of optimized out static functions.
        (cgraph_edge_badness): Add DUMP parameter and dump reasons for the
        cost computation.  Also sanity check for overflows.
        (update_caller_keys): Update cgraph_edge_badness call; properly
        update fibheap and sanity check that it is up to date.
        (add_new_edges_to_heap): Update cgraph_edge_badness.
        (cgraph_decide_inlining_of_small_function): Likewise;
        add sanity checking that badness in heap is up to date;
        improve dumping of reason; Update badness of calls to the
        offline copy of function currently inlined; dump badness
        of functions not inlined because of unit growth limits.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        PR middle-end/32628
        * c-common.c (pointer_int_sum): Disregard overflow that occured only
        because of sign-extension change when converting to sizetype here...
        * fold-const.c (fold_convert_const_int_from_int): ...and not here.

        * fold-const.c (fold_binary_op_with_conditional_arg): Do not restrict
        the folding to constants.  Remove redundant final conversion.
        (fold_binary) <associate>: Do not associate if the re-association of
        constants alone overflows.
        (fold_binary) <FLOOR_MOD_EXPR>: Move transformation into BIT_AND_EXPR
        to the end of the list.
        (multiple_of_p) <COND_EXPR>: New case.

2010-04-13  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        * opt-functions.awk (opt_sanitized_name): New.
        (opt_enum): New.
        * optc-gen.awk: Use it
        * opth-gen.awk: Use it.

2010-04-13  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (replace_uses_with_default_def_ssa_name): New function.
        (sra_modify_assign): Delete stmts loading dead data even if racc has no
        children.  Call replace_uses_with_default_def_ssa_name to handle
        SSA_NAES on lhs.

2010-04-13  Michael Matz  <matz@suse.de>

        PR middle-end/43730
        * builtins.c (expand_builtin_interclass_mathfn): Also create
        a register if the predicate doesn't match.

2010-04-13  Diego Novillo  <dnovillo@google.com>

        * Makefile.in (c-pch.o, ggc-common.o): Depend on timevar.h.
        * c-pch.c: Include timevar.h.
        (c_common_write_pch): Use TV_PCH_SAVE and TV_PCH_CPP_SAVE timers.
        (c_common_read_pch): Use TV_PCH_RESTORE and TV_PCH_CPP_RESTORE timers.
        * ggc-common.c: Include timevar.h.
        (gt_pch_save): Use TV_PCH_PTR_REALLOC and TV_PCH_PTR_SORT timers.
        * timevar.def (TV_PCH_SAVE): Define.
        (TV_PCH_CPP_SAVE): Define.
        (TV_PCH_PTR_REALLOC): Define.
        (TV_PCH_PTR_SORT): Define.
        (TV_PCH_RESTORE): Define.
        (TV_PCH_CPP_RESTORE): Define.

2010-04-13  Michael Matz  <matz@suse.de>

        * tree-ssa-reassoc.c (repropagate_negates): Merge negates also
        into MINUS_EXPRs.
        (can_reassociate_p): New function.
        (break_up_subtract_bb, reassociate_bb): Use it.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        PR bootstrap/43737
        * builtins.c (c_readstr): Fix assert.

2010-04-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (extendsidi2 splitter): Also check for DX_REG
        when generating cltd insn.

        (*ashl<mode>3_1): Remove special handling for register operand 2.
        (*ashlsi3_1_zext): Ditto.
        (*ashlhi3_1): Ditto.
        (*ashlhi3_1_lea): Ditto.
        (*ashlqi3_1): Ditto.
        (*ashlqi3_1_lea): Ditto.
        (*<shiftrt_insn><mode>3_1): Ditto.
        (*<shiftrt_insn>si3_1_zext): Ditto.
        (*<shiftrt_insn>qi3_1_slp): Ditto.
        (*<rotate_insn><mode>3_1): Ditto.
        (*<rotate_insn>si3_1_zext): Ditto.
        (*<rotate_insn>qi3_1_slp): Ditto.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-structalias.c (callused_id): Remove.
        (call_stmt_vars): New.
        (get_call_vi): Likewise.
        (lookup_call_use_vi): Likewise.
        (lookup_call_clobber_vi): Likewise.
        (get_call_use_vi): Likewise.
        (get_call_clobber_vi): Likewise.
        (make_transitive_closure_constraints): Likewise.
        (handle_const_call): Adjust to do per-call call-used handling.
        (handle_pure_call): Likewise.
        (find_what_var_points_to): Remove general callused handling.
        (init_base_vars): Likewise.
        (init_alias_vars): Initialize call_stmt_vars.
        (compute_points_to_sets): Process call-used and call-clobbered
        vars for call statements.
        (delete_points_to_sets): Free call_stmt_vars.

2010-04-13  Richard Guenther  <rguenther@suse.de>

        * tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
        Only add RW dependence for dependence distance zero.
        Adjust maximal vectorization factor according to dependences.
        Move alignment handling ...
        (vect_find_same_alignment_drs): ... here.  New function.
        (vect_analyze_data_ref_dependences): Adjust.
        (vect_analyze_data_refs_alignment): Call vect_find_same_alignment_drs.
        (vect_analyze_data_refs): Adjust minimal vectorization factor
        according to data references.
        * tree-vect-loop.c (vect_analyze_loop): Analyze data-ref
        dependences before determining the vectorization factor.
        Analyze alignment after determining the vectorization factor.
        * tree-vect-slp.c ((vect_slp_analyze_bb): Analyze data-ref
        dependences before alignment.
        * tree-vectorizer.h (vect_analyze_data_ref_dependences):
        Adjust prototype.
        (vect_analyze_data_refs): Likewise.
        (MAX_VECTORIZATION_FACTOR): New define.

2010-04-13  Duncan Sands  <baldrick@free.fr>

        * except.h (lang_eh_type_covers): Remove.
        * except.c (lang_eh_type_covers): Likewise.

2010-04-13  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
            Ulrich Weigand  <Ulrich.Weigand@de.ibm.com>

        * gcc/config/s390/s390.md: Replace TARGET_64BIT with TARGET_ZARCH.
        * gcc/config/s390/s390.c: Replace UNTIS_PER_WORD with
        UNITS_PER_LONG where it is ABI relevant.
        (s390_return_addr_rtx): Likewise.
        (s390_back_chain_rtx): Likewise.
        (s390_frame_area): Likewise.
        (s390_frame_info): Likewise.
        (s390_initial_elimination_offset): Likewise.
        (save_gprs): Likewise.
        (s390_emit_prologue): Likewise.
        (s390_emit_epilogue): Likewise.
        (s390_function_arg_advance): Likewise.
        (s390_function_arg): Likewise.
        (s390_va_start): Likewise.
        (s390_gimplify_va_arg): Likewise.
        (s390_function_profiler): Likewise.
        (s390_optimize_prologue): Likewise.
        (s390_rtx_costs): Likewise.
        (s390_secondary_reload): Likewise.
        (s390_promote_function_mode): Likewise.
        (s390_hard_regno_mode_ok): Replace TARGET_64BIT with TARGET_ZARCH.
        (s390_scalar_mode_supported_p): Disallow TImode if no 64 bit
        registers available.
        (s390_unwind_word_mode): New function.
        (s390_function_value): Split 64 bit values into register pair if
        used as return value.
        (s390_call_saved_register_used): Don't use HARD_REGNO_NREGS for
        function call parameters.  Handle parallels.
        (TARGET_SCALAR_MODE_SUPPORTED_P): New macro.
        (HARD_REGNO_CALL_PART_CLOBBERED): New macro.
        (DWARF_CIE_DATA_ALIGNMENT): New macro.
        (s390_expand_setmem): Remove unused variable src_addr.
        * gcc/longlong.h: Make smul_ppmm and sdiv_qrnnd inline asms to
        deal with 64 bit registers.
        * gcc/config/s390/s390.h: Define __zarch__ predefined macro.
        Replace UNITS_PER_WORD with UNITS_PER_LONG where it is ABI relevant.
        (UNITS_PER_LONG): New macro.
        * libjava/include/s390-signal.h: Define extended ucontext
        structure containing the upper halfs of the 64 bit registers.

2010-04-13  Simon Baldwin  <simonb@google.com>

        * cfgexpand.c (gimple_expand_cfg): Clarify warning message text.

2010-04-13  Eric Botcazou  <ebotcazou@adacore.com>

        * gimple.c (walk_gimple_op) <GIMPLE_ASSIGN>: Do not request a pure
        rvalue on the RHS if the LHS is of a non-renamable type.
        * tree-ssa-ccp.c (maybe_fold_offset_to_component_ref): Fold result.

2010-04-13  Matthias Klose  <doko@ubuntu.com>

        * gcc.c (cc1_options): Handle -iplugindir before processing
        the cc1 spec. Only add -iplugindir once.
        (cpp_unique_options): Add -iplugindir option if -fplugin* options
        found.
        * common.opt (iplugindir): Remove `Separate' property, initialize.
        * plugin.c (default_plugin_dir_name): Error with missing -iplugindir
        option.
        * Makefile.in (check-%, check-parallel-%): Create plugin dir.
        (distclean): Remove plugin dir.
        * doc/invoke.texi: Document -iplugindir.

2010-04-13  Basile Starynkevitch  <basile@starynkevitch.net>

        * doc/plugins.texi (Loading Plugins): Document short
        -fplugin=foo option.
        (Plugin API): Mention default_plugin_dir_name function.

        * gcc.c (find_file_spec_function): Add new declaration.
        (static_spec_func): Use it for "find-file".
        (find_file_spec_function): Add new function.
        (cc1_options): Add -iplugindir option if -fplugin* options found.

        * gcc-plugin.h (default_plugin_dir_name): Added new declaration.

        * plugin.c (add_new_plugin): Updated comment, and handle short
        plugin name.
        (default_plugin_dir_name): Added new function.

        * common.opt (iplugindir): New option to set the plugin directory.

2010-04-12  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_rotate): New code iterator.
        (rotate_insn): New code attribute.
        (rotate): Ditto.
        (SWIM124): New mode iterator.
        (<rotate_insn>ti3): New expander.
        (<rotate_insn>di3): Macroize expander from {rotl,rotr}di3 using
        any_rotate code iterator.
        (<rotate_insn><mode>3) Macroize expander from {rotl,rotr}{qi,hi,si}3
        using any_rotate code iterator and SWIM124 mode iterator.
        (ix86_rotlti3): New insn_and_split pattern.
        (ix86_rotrti3): Ditto.
        (ix86_rotl<dwi>3_doubleword): Macroize insn_and_split pattern from
        ix86_rotl{di,ti}3 patterns.
        (ix86_rotr<dwi>3_doubleword): Ditto from ix86_rotr{di,ti}3 patterns.
        (*<rotate_insn><mode>3_1): Merge with *{rotl,rotr}{qi,hi,si}3_1_one_bit
        and *{rotl,rotr}di3_1_one_bit_rex64. Macroize insn from
        *{rotl,rotr}{qi,hi,si}3_1 and *{rotl,rotr}di3_1_rex64 using any_rotate
        code iterator and SWI mode iterator.
        (*<rotate_insn>si3_1_zext): Merge with *{rotl,rotr}si3_1_one_bit_zext.
        Macroize insn from {rotl,rotr}si3_1_zext using any_rotate
        code iterator.
        (*<rotate_insn>qi3_1_slp): Merge with *{rotl,rotr}qi3_1_one_bit_slp.
        Macroize insn from {rotl,rotr}qi3_1_slp using any_rotate code iterator.
        (bswap rotatert splitter): Add splitter.
        (bswap splitter): Macroize splitter using any_rotate code iterator.
        Add insn predicate to split only for TARGET_USE_XCHGB or when
        optimizing function for size.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (emit_move_sequence): Remove use of
        deleted variable flag_argument_noalias.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc: Removed *-*-solaris2.7* from list of obsolete
        configurations.
        Add to unsupported targets list.
        * configure.ac (gcc_cv_as_tls): Removed i[34567]86-*-solaris2.[567]*,
        sparc*-sun-solaris2.[567]* from target lists.
        * configure: Regenerate.
        * doc/install.texi (Specific, *-*-solaris2*): Document Solaris 7
        removal.
        Remove Solaris 7 patch references.
        (Specific, sparc-sun-solaris2.7): Removed.
        (sparc-sun-solaris2*): Update Solaris 7 example.
        (sparc64-*-solaris2*): Likewise.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.build (alpha*-dec-osf4*): Remove.
        * config.gcc: Remove alpha*-dec-osf4*, alpha-dec-osf5.0* from list
        of obsolete configurations.
        (alpha*-dec-osf[45]*): Remove alpha*-dec-osf4*, alpha-dec-osf5.0*
        support.
        * config/alpha/t-osf4: Renamed to ...
        * config/alpha/t-osf5: ... this.
        * config/alpha/osf.h: Renamed to ...
        * config/alpha/osf5.h: ... this.
        Merged old osf5.h contents.
        Update comments.
        (ASM_SPEC): Use ASM_OLDAS_SPEC directly.
        (EXTRA_SPECS): Removed.
        * doc/install.texi (Specific, alpha*-dec-osf5.1): Renamed to
        reflect removal of Tru64 UNIX V4.0/V5.0 support.
        Document that.

2010-04-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/contrib.texi (Contributors, Rainer Orth): Update.

2010-04-12  Kai Tietz  <kai.tietz@onevision.com>

        PR/43702
        * config/i386/i386.c (x86_this_parameter): Handle aggregate for
        __thiscall convention.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa.c (hppa_legitimize_address): Remove unused variable
        orig_base.
        * config/pa/pa.md (call, call_value): Remove unused variable call_insn.

2010-04-12  Steve Ellcey  <sje@cup.hp.com>

        * function.c (assign_parms_initialize_all): Add unused attribute
        to fntype.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * gsstruct.def (GSS_CALL): New.
        * gimple.def (GIMPLE_CALL): Change to GSS_CALL.
        * gimple.h: Include tree-ssa-alias.h.
        (struct gimple_statement_call): New.
        (union gimple_statement_struct_d): Add gimple_call member.
        (gimple_call_reset_alias_info): Declare.
        (gimple_call_use_set): New function.
        (gimple_call_clobber_set): Likewise.
        * Makefile.in (GIMPLE_H): Add tree-ssa-alias.h.
        * gimple.c (gimple_call_reset_alias_info): New function.
        (gimple_build_call_1): Call it.
        * lto-streamer-in.c (input_gimple_stmt): Likewise.
        * tree-inline.c (remap_gimple_stmt): Likewise.
        (expand_call_inline): Remove callused handling.
        * cfgexpand.c (update_alias_info_with_stack_vars): Likewise.
        * tree-dfa.c (dump_variable): Likewise.
        * tree-parloops.c (parallelize_loops): Likewise.
        * tree-ssa.c (init_tree_ssa): Likewise.
        (delete_tree_ssa): Likewise.
        * tree-flow-inline.h (is_call_used): Remove.
        * tree-flow.h (struct gimple_df): Remove callused member.
        * tree-nrv.c (dest_safe_for_nrv_p): Adjust predicate.
        * tree-ssa-alias.c (dump_alias_info): Remove callused handling.
        (ref_maybe_used_by_call_p_1): Simplify.
        (call_may_clobber_ref_p_1): Likewise.
        * tree-ssa-structalias.c (compute_points_to_sets): Set
        the call stmt used and clobbered sets.
        * tree-tailcall.c (suitable_for_tail_opt_p): Adjust predicate.
        (find_tail_calls): Verify the tail call.

2010-04-12  Richard Guenther  <rguenther@suse.de>

        * ipa.c (cgraph_postorder): Adjust postorder to guarantee
        single-iteration always-inline inlining.
        * ipa-inline.c (cgraph_mark_inline): Do not return anything.
        (cgraph_decide_inlining): Do not handle always-inline specially.
        (try_inline): Remove always-inline cycle detection special case.
        Do not recurse on always-inlines.
        (cgraph_early_inlining): Do not iterate if not optimizing.
        (cgraph_gate_early_inlining): remove.
        (pass_early_inline): Run unconditionally.
        (gate_cgraph_decide_inlining): New function.
        (pass_ipa_inline): Use it.  Do not run the IPA inliner if
        not inlining or optimizing.
        (cgraph_decide_inlining_of_small_functions): Also consider
        always-inline functions.
        (cgraph_default_inline_p): Return true for nodes which should
        disregard inline limits.
        (estimate_function_body_sizes): Assume zero size and time for
        nodes which are marked as disregarding inline limits.
        (cgraph_decide_recursive_inlining): Do not perform recursive
        inlining on always-inline nodes.

2010-04-12  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43699
        * c-typeck.c (c_process_expr_stmt): Call mark_exp_read even
        for exprs satisfying handled_component_p.

2010-04-12  Eric Botcazou  <ebotcazou@adacore.com>

        * expr.c (categorize_ctor_elements_1): Properly count sub-elements of
        non-constant aggregate elements.

        * gimplify.c (gimplify_init_constructor): Do not pre-evaluate if this
        is a real initialization.

2010-04-12  Shujing Zhao  <pearly.zhao@oracle.com>

        PR c/36774
        * c-decl.c (start_function): Move forward check for nested function.

2010-04-11  Kaz Kojima  <kkojima@gcc.gnu.org>

        * config/sh/sh-protos.h (sh_legitimize_reload_address): Declare.
        * config/sh/sh.c: Include reload.h.
        (sh_legitimize_reload_address): New.
        * config/sh/sh.h (LEGITIMIZE_RELOAD_ADDRESS): Use
        sh_legitimize_reload_address.

2010-04-11  Kaushik Phatak  <kaushik.phatak@kpitcummins.com>

        * config/sh/sh.md (*movqi_pop): New insn pattern.
        * config/sh/predicates.md (sh_no_delay_pop_operand): New predicate.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (any_shiftrt): New code iterator.
        (shiftrt_insn): New code attribute.
        (shiftrt): Ditto.
        (<shiftrt_insn><mode>3): Macroize expander from {ashr,lshr}<mode>3
        using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword): Macroize insn_and_split from
        *{ashr,lshr}<mode>3_doubleword using any_shiftrt code iterator.
        (*<shiftrt_insn><mode>3_doubleword peephole2): Macroize peephole2
        pattern from corresponding peephole2 patterns.
        (*<shiftrt_insn><mode>3_1): Macroize insn from *{ashr,lshr}<mode>3_1
        using any_shiftrt code iterator.
        (*<shiftrt_insn>si3_1_zext): Ditto from *{ashr,lshr}si3_1_zext.
        (*<shiftrt_insn>qi3_1_slp): Ditto from *{ashr,lshr}qi3_1_slp.
        (*<shiftrt_insn><mode>3_cmp): Ditto from *{ashr,lshr}<mode>3_cmp.
        (*<shiftrt_insn><mode>3_cmp_zext): Ditto from
        *{ashr,lshr}<mode>3_cmp_zext.
        (*<shiftrt_insn><mode>3_cconly): Ditto from *{ashr,lshr}<mode>3_cconly.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (*ashr<mode>3_cconly): Fix wrong mode of
        scratch register.
        (*lshr<mode>3_cconly): Ditto.

2010-04-11  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (lshr<mode>3): Macroize expander from
        lshr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*lshr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *lshr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*lshr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (*lshr<mode>3_1): Merge with *lshr{qi,hi,si}3_1_one_bit and
        *lshrdi3_1_one_bit_rex64. Macroize insn from *lshr{qi,hi,si}3_1
        and *lshrdi3_1_rex64 using SWI mode iterator.
        (*lshrsi3_1_zext): Merge with *lshrsi3_1_one_bit_zext.
        (*lshrqi3_1_slp): Merge with *lshrqi3_1_one_bit_slp.
        (*lshr<mode>3_cmp): Merge with *lshr{qi,hi,si}3_one_bit_cmp and
        *lshrdi3_one_bit_cmp_rex64. Macroize insn from *lshr{qi,hi,si}3_cmp
        and *lshrdi3_cmp_rex64 using SWI mode iterator.
        (*lshrsi3_cmp_zext): Merge with *lshrsi3_cmp_one_bit_zext.
        (*lshr<mode>3_cconly): Merge with *lshr{qi,hi,si}3_one_bit_cconly and
        *lshrdi3_one_bit_cconly_rex64. Macroize insn from
        *lshr{qi,hi,si}3_cconly and *lshrdi3_cconly_rex64 using
        SWI mode iterator.

2010-04-10  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (ashr<mode>3): Macroize expander from
        ashr{qi,hi,si,di,ti}3_1 using SDWIM mode iterator.
        (*ashr<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashr{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashr<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (ashrdi3_cvt): Rename from ashrdi3_63_rex64.
        (ashrsi3_cvt): Rename from ashrsi3_31.
        (*ashrsi3_cvt_zext): Rename from *ashrsi3_31_zext.
        (x86_shift<mode>_adj_3): Macroize expander from x86_shift_adj_3
        and x86_64_shift_adj_3 using SWI48 mode iterator.
        (*ashr<mode>3_1): Merge with *ashr{qi,hi,si}3_1_one_bit and
        *ashrdi3_1_one_bit_rex64. Macroize insn from *ashr{qi,hi,si}3_1
        and *ashrdi3_1_rex64 using SWI mode iterator.
        (*ashrsi3_1_zext): Merge with *ashrsi3_1_one_bit_zext.
        (*ashrqi3_1_slp): Merge with *ashrqi3_1_one_bit_slp.
        (*ashr<mode>3_cmp): Merge with *ashr{qi,hi,si}3_one_bit_cmp and
        *ashrdi3_one_bit_cmp_rex64. Macroize insn from *ashr{qi,hi,si}3_cmp
        and *ashrdi3_cmp_rex64 using SWI mode iterator.
        (*ashrsi3_cmp_zext): Merge with *ashrsi3_cmp_one_bit_zext.
        (*ashr<mode>3_cconly): Merge with *ashr{qi,hi,si}3_one_bit_cconly and
        *ashrdi3_one_bit_cconly_rex64. Macroize insn from
        *ashr{qi,hi,si}3_cconly and *ashrdi3_cconly_rex64 using
        SWI mode iterator.
        (sign_extend splitters): Update for renamed ashr{di,si}3_cvt patterns.
        * config/i386/i386.c (ix86_split_ashr): Update for renamed
        x86_shift<mode>_adj_3 expanders.

2010-04-10  Wei Guozhi  <carrot@google.com>

        PR target/42601
        * config/arm/arm.c (arm_pic_static_addr): New function.
        (legitimize_pic_address): Call arm_pic_static_addr when it detects
        a static symbol.
        (arm_output_addr_const_extra): Output expression for new pattern.
        * config/arm/arm.md (UNSPEC_SYMBOL_OFFSET): New unspec symbol.

2010-04-10  Bernd Schmidt  <bernds@codesourcery.com>

        * ira-costs.c (record_reg_classes): Ignore alternatives that are
        not enabled.

        * Makefile.in (web.o): Depend on insn-config.h and $(RECOG_H).
        * web.c: Include "insn-config.h" and "recog.h".
        (union_match_dups): New function.
        (web_main): Call it.
        (union_defs): Don't try to recognize match_dups.

        * reload1.c (eliminate_regs_in_insn): Don't restore an operand
        if doing so would replace the entire pattern.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43707
        PR target/43709
        * config/i386/i386.md (*ashl<mode>3_doubleword): Split to insn
        and splitter pattern.  Change splitter operand 1 predicate to
        nonmemory_operand.

2010-04-09  Martin Jambor  <mjambor@suse.cz>

        * ipa-cp.c (ipcp_lats_are_equal): Return true also if the two
        lattices are addresses of CONST_DECLs with the same initial value.
        (ipcp_print_all_lattices): Print values of CONST_DECLs.
        * ipa-prop.c (ipa_print_node_jump_functions): Likewise.

2010-04-09  Eric Botcazou  <ebotcazou@adacore.com>
            Bernd Schmidt  <bernds@codesourcery.com>

        * loop-invariant.c (replace_uses): New static function.
        (move_invariant_reg): Use it to ensure we can replace the uses.

2010-04-09  Hariharan Sandanagobalane  <hariharan@picochip.com>

        * config/picochip/picochip.c (picochip_rtx_costs): Use correct
        function template.
        (picochip_override_options): Enable section anchors only above -O1.
        (picochip_reorg): Fixed a couple of build warnings.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (plugin -rdynamic test): Log result.
        * configure: Regenerate.
        * config/sol2.h (LINK_SPEC): Handle -rdynamic.
        (RDYNAMIC_SPEC): Define.
        * config/sol2-gld.h (RDYNAMIC_SPEC): Redefine.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac: Determine Sun ld version numbers.
        (comdat_group): Restrict GNU ld version checks to gld.
        (comdat_group, *-*-solaris2.1[1-9]*): Enable for Sun ld > 1.1688.
        (enable_comdat): Support --enable-comdat.
        * configure: Regenerate.
        * doc/install.texi (Configuration): Document --enable-comdat.

2010-04-09  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sparc/sol2-gld.h: Remove SPARC reference.  Rename ...
        * config/sol2-gld.h: ... here.
        * config.gcc (sparc*-*-solaris2*): Reflect this.
        (i[34567]86-*-solaris2*): Use it.

2010-04-09  Steve Ellcey  <sje@cup.hp.com>

        * config/ia64/ia64.c (ia64_dfa_new_cycle): Remove unused variable
        setup_clocks_p.
        (final_emit_insn_group_barriers): Remove unused variable prev_insn.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42965
        * diagnostic.c (diagnostic_initialize): Initialize
        some_warnings_are_errors.
        (diagnostic_finish): New.
        (diagnostic_action_after_output): Call it before exiting.
        (diagnostic_report_diagnostic): Do not print message here. Set
        some_warnings_are_errors.
        * diagnostic.h (diagnostic_context): Delete
        issue_warnings_are_errors_message. Add some_warnings_are_errors.
        (diagnostic_finish): Declare.
        * toplev.c (toplev_main): Call it before exit.

2010-04-09  Jason Merrill  <jason@redhat.com>

        PR c++/42623
        * c-common.c (c_sizeof_or_alignof_type): Return error_mark_node
        for incomplete type.

        PR c++/41788
        * stor-layout.c (finalize_record_size): Don't change TYPE_PACKED
        based on a warning flag.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-pretty-print.c (dump_generic_node): Dump TYPE_VECTOR_SUBPARTS.

2010-04-09  Iain Sandoe  <iains@gcc.gnu.org>

        PR bootstrap/43684
        * varasm.c (default_assemble_visibility): Wrap vars that are
        set, but unused, by targets without GAS.
        * config/rs6000/rs6000.c: (paired_emit_vector_compare):
        Remove set, but unused, vars.
        (rs6000_legitimize_tls_address): Likewise.
        (altivec_expand_dst_builtin): Likewise.
        * config/darwin.c (machopic_classify_symbol): Likewise.
        (machopic_indirection_name): Likewise.

2010-04-09  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md (DWI): New mode iterator.
        (S): New mode attribute.
        (shift_operand): Ditto.
        (shift_immediate_operand): Ditto.
        (ashl_input_operand): Ditto.
        (ashl<mode>3): Macroize expander from ashl{qi,hi,si,di,ti}3_1
        using SDWIM mode iterator.
        (*ashl<mode>3_doubleword): New insn_and_split_pattern.  Macroize
        pattern from *ashl{di,ti}3_1 and corresponding splitters using
        DWI mode iterator.
        (*ashl<mode>3_doubleword peephole2): Macroize peephole2 pattern
        from corresponding peephole2 patterns.
        (x86_shift<mode>_adj_1): Macroize expander from x86_shift_adj_1
        and x86_64_shift_adj_1 using SWI48 mode iterator.
        (x86_shift<mode>_adj_2): Ditto.
        (*ashldi3_1_rex64): Split TYPE_LEA pattern.
        (*ashl<mode>3_1): Macroize insn from *ashlsi3_1 and *ashldi3_1_rex64
        using SWI48 mode iterator.
        (*ashl<mode>3_cmp): Macroize insn from *ashl{qi,hi,si}3_cmp and
        *ashldi3_cmp_rex64 using SWI mode iterator.
        (*ashl<mode>3_cconly): Macroize insn from *ashl{qi,hi,si}3_cconly and
        *ashldi3_cconly_rex64 using SWI mode iterator.
        * config/i386/i386.c (ix86_split_ashl): Update for renamed
        x86_shift<mode>_adj_{1,2}.
        (ix86_split_ashr): Ditto.
        (ix86_split_lshr): Ditto.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * target.h (builtin_conversion): Pass in input and output types.
        * targhooks.c (default_builtin_vectorized_conversion): Adjust.
        * targhooks.h (default_builtin_vectorized_conversion): Likewise.
        * tree-vect-stmts.c (vectorizable_conversion): Adjust.
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_CONVERSION): Adjust.

        * config/i386/i386.c (ix86_vectorize_builtin_conversion): Adjust.
        Handle AVX modes.
        * config/rs6000/rs6000.c (rs6000_builtin_conversion): Adjust.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        PR target/43152
        * config/i386/sse.md (vcond<mode>): Handle AVX modes as well.

2010-04-09  Richard Guenther  <rguenther@suse.de>

        * tree-vectorizer.h (struct _stmt_vec_info): Document
        that vectype is the type of the LHS.
        (supportable_widening_operation, supportable_narrowing_operation):
        Get both input and output vector types as arguments.
        (vect_is_simple_use_1): Declare.
        (get_same_sized_vectype): Likewise.
        * tree-vect-loop.c (vect_determine_vectorization_factor):
        Set STMT_VINFO_VECTYPE to the vector type of the def.
        (vectorizable_reduction): Adjust.
        * tree-vect-patterns.c (vect_recog_widen_mult_pattern):
        Adjust.  Specify the output vector type.
        (vect_pattern_recog_1): Adjust.
        * tree-vect-stmts.c (get_same_sized_vectype): New function.
        (vectorizable_call): Adjust.
        (vectorizable_conversion): Likewise.
        (vectorizable_operation): Likewise.
        (vectorizable_type_demotion): Likewise.
        (vectorizable_type_promotion): Likewise.
        (vect_analyze_stmt): Set STMT_VINFO_VECTYPE to the vector type of
        the def.
        (vect_is_simple_use_1): New function.
        (supportable_widening_operation): Get both input and output
        vector types.
        (supportable_narrowing_operation): Likewise.
        * tree-vect-slp.c (vect_schedule_slp_instance): Adjust.

2010-04-09  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/cygming.h (TARGET_OS_CPP_BUILTINS): Add
        __thiscall and _thiscall as predefined macros.
        * config/i386/i386.c (ix86_handle_cconv_attribute): Add
        thiscall attribute handling.
        (ix86_comp_type_attributes): Likewise.
        (ix86_function_regparm): Likewise.
        (ix86_return_pops_args): Likewise.
        (init_cumulative_args): Likewise.
        (find_drap_reg): Likewise.
        (ix86_static_chain): Likewise.
        (x86_this_parameter): Likewise.
        (x86_output_mi_thunk): Likewise.
        (ix86_attribute_table): Add description for thiscall attribute.
        * config/i386/i386.h (ix86_args): Adjust comment for member fastcall.
        * doc/extend.texi: Add documentation for thiscall.

2010-04-09  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR c++/28584
        * c.opt (Wint-to-pointer-cast): Available in C++.
        * doc/invoke.texi (Wint-to-pointer-cast): Available in C++.

2010-04-08  Eric Botcazou  <ebotcazou@adacore.com>

        * tree.h (TREE_ADDRESSABLE): Document its effect for function types.
        * calls.c (expand_call): Pass the function type to aggregate_value_p.
        * function.c (aggregate_value_p): Do not honor DECL_BY_REFERENCE on
        the target function of a CALL_EXPR.  Honor TREE_ADDRESSABLE on the
        function type instead.  Reorder and simplify checks.

        * gimplify.c (gimplify_modify_expr_rhs) <WITH_SIZE_EXPR>: New case.

2010-04-08  Jing Yu  <jingyu@google.com>
            Zdenek Dvorak  <ook@ucw.cz>

        PR tree-optimization/42720
        * tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Move one-time
        loop unswitch conditions here from ...
        (tree_unswitch_single_loop): ... here.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix comments and simplify logic.

2010-04-08  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c (if_convertible_loop_p): Remove unused parameter.
        (tree_if_conversion): Same.  Update call to if_convertible_loop_p.
        (main_tree_if_conversion): Update call to tree_if_conversion.

2010-04-08  Manuel López-Ibáñez  <manu@gcc.gnu.org>

        PR 42485
        * doc/invoke.texi (-b,-V): Delete.
        * doc/tm.texi: Do not mention -b.
        * gcc.c (display_help): Delete -b and -V.
        (process_command): Delete -b and -V.
        * gcc.h (DEFAULT_SWITCH_TAKES_ARG): Delete -b and -V.

2010-04-08  Christian Borntraeger  <borntraeger@de.ibm.com>
            Wolfgang Gellerich  <gellerich@de.ibm.com>

        Implement target hook for loop unrolling
        * target.h (loop_unroll_adjust): Add a new target hook function.
        * target-def.h (TARGET_LOOP_UNROLL_ADJUST): Likewise.
        * doc/tm.texi (TARGET_LOOP_UNROLL_ADJUST): Document it.
        * config/s390/s390.c (TARGET_LOOP_UNROLL_ADJUST): Define it.
        (s390_loop_unroll_adjust): Implement the new target hook for s390.
        * loop-unroll.c (decide_unroll_runtime_iterations): Call loop unroll
        target hook.
        (decide_unroll_stupid): Likewise.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/43643
        * config/i386/gmon-sol2.c [__x86_64__]: Properly restore %rcx.

2010-04-08  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, i?86-*-solaris2.10): Fix grammar.
        (Specific, *-*-solaris2*): Likewise.
        Don't prefer Sun as over GNU as.

2010-04-08  Wolfgang Gellerich  <gellerich@de.ibm.com>

        * config/s390/s390.c (override_options): Adjust the z10
          defaults for max-unroll-times, max-completely-peeled-insns
          and max-completely-peel-times.

2010-04-08  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_expand_movmem): Issue prefetch
        instructions for z10.
        (s390_expand_setmem): Likewise.
        (s390_expand_cmpmem): Likewise.

2010-04-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43679
        * tree-ssa-pre.c (eliminate): Only propagate copies.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43681
        * expr.c (block_move_libcall_safe_for_call_parm): Avoid
        set but not used variable warning.

2010-04-08  Wei Guozhi  <carrot@google.com>

        PR target/41653
        * config/arm/arm.c (thumb1_size_rtx_costs): New function.
        (arm_size_rtx_costs): Call the new function when optimized for size.

2010-04-08  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43670
        * cfgexpand.c (expand_debug_expr): If for non-NULL offset
        op0 is not a MEM, just return NULL instead of assertion
        failure.
        (discover_nonconstant_array_refs): Don't walk debug stmts.

2010-04-08  Doug Kwan  <dougkwan@google.com>

        * configure.ac: Recognize gold and do not use its version number
        to test ld features.
        * configure: Regenerate.

2010-04-08  Maxim Kuvyrkov  <maxim@codesourcery.com>

        PR middle-end/40815
        * tree-ssa-reassoc.c (broken_up_substracts): Rename to plus_negates.
        (negate_value): Move code to push elements to broken_up_substracts ...
        (eliminate_plus_minus_pair): ... here.  Push operands that have no
        negative pair to plus_negates.
        (repropagate_negates, init_reassoc, fini_reassoc): Update.

2010-04-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/install.texi (Configuration): Move description of
        --enable-lto, --with-libelf*, --enable-gold from Java section to
        general section.

        * doc/generic.texi (Working with declarations)
        (Function Properties, C and C++ Trees): Fix typos.
        * doc/sourcebuild.texi (Top Level): Likewise.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR c/18624
        * tree.h (DECL_READ_P): Define.
        (struct tree_decl_common): Add decl_read_flag.
        * c-decl.c (pop_scope): If TREE_USED but !DECL_READ_P, issue
        a set but not used warning.
        (merge_decls): Merge DECL_READ_P flag.
        (finish_decl, build_compound_literal): Set DECL_READ_P flag.
        (finish_function): Issue -Wunused-but-set-parameter diagnostics.
        * c-common.c (handle_used_attribute, handle_unused_attribute):
        Likewise.
        * c-tree.h (default_function_array_read_conversion, mark_exp_read):
        New prototypes.
        * c-typeck.c (default_function_array_read_conversion, mark_exp_read):
        New functions.
        (default_conversion, c_process_expr_stmt): Call mark_exp_read.
        * c-parser.c (c_parser_initializer, c_parser_expr_no_commas,
        c_parser_binary_expression, c_parser_cast_expression,
        c_parser_expr_list, c_parser_omp_atomic, c_parser_omp_for_loop):
        Call default_function_array_read_conversion instead of
        default_function_array_conversion where needed.
        (c_parser_unary_expression, c_parser_conditional_expression,
        c_parser_postfix_expression_after_primary, c_parser_initelt):
        Likewise.  Call mark_exp_read where needed.
        (c_parser_statement_after_labels, c_parser_asm_operands,
        c_parser_typeof_specifier, c_parser_sizeof_expression,
        c_parser_alignof_expression, c_parser_initval): Call mark_exp_read
        where needed.
        * common.opt (Wunused-but-set-variable, Wunused-but-set-parameter):
        New.
        * toplev.c (warn_unused_but_set_variable): Default to warn_unused.
        (warn_unused_but_set_parameter): Default to warn_unused
        && extra_warnings.
        * doc/invoke.texi: Document -Wunused-but-set-variable and
        -Wunused-but-set-parameter.

        * tree-ssa-pre.c (my_rev_post_order_compute): Remove set but not
        used count variable.
        * genemit.c (gen_expand, gen_split): Avoid set but not used warnings
        when operandN variables aren't used in the body of the expander
        or splitter.
        * tree-outof-ssa.c (FOR_EACH_ELIM_GRAPH_SUCC,
        FOR_EACH_ELIM_GRAPH_PRED): Avoid set but not used warnings.
        * tree-ssa-operands.h (FOR_EACH_SSA_TREE_OPERAND): Likewise.
        * tree-flow.h (FOR_EACH_IMM_USE_FAST, FOR_EACH_IMM_USE_STMT,
        FOR_EACH_IMM_USE_ON_STMT): Likewise.
        * tree.h (FOR_EACH_CONSTRUCTOR_ELT): Likewise.
        * tree.c (PROCESS_ARG): Likewise.

2010-04-07  Simon Baldwin  <simonb@google.com>

        * diagnostic.h (diagnostic_override_option_index): New macro to
        set a diagnostic's option_index.
        * c-tree.h (c_cpp_error): Add warning reason argument.
        * opts.c (_warning_as_error_callback): New.
        (register_warning_as_error_callback): Store callback for
        warnings enabled via enable_warning_as_error.
        (enable_warning_as_error): Call callback, minor code tidy.
        * opts.h (register_warning_as_error_callback): Declare.
        * c-opts.c (warning_as_error_callback): New, set cpp_opts flag in
        response to -Werror=.
        (c_common_init_options): Register warning_as_error_callback in opts.c.
        * common.opt: Add -Wno-cpp option.
        * c-common.c (struct reason_option_codes_t): Map cpp warning
        reason codes to gcc option indexes.
        * (c_option_controlling_cpp_error): New function, lookup the gcc
        option index for a cpp warning reason code.
        * (c_cpp_error): Add warning reason argument, call
        c_option_controlling_cpp_error for diagnostic_override_option_index.
        * doc/invoke.texi: Document -Wno-cpp.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * ipa-reference.c (mark_load): Use get_base_address.
        (mark_store): Likewise.

        * tree-ssa-ccp.c (gimplify_and_update_call_from_tree): Avoid
        inserting GIMPLE_NOPs into the IL.
        * tree-ssa-structalias.c (get_constraint_for_component_ref):
        Explicitly strip handled components and indirect references.

        * fold-const.c (fold_unary_loc): Do not strip qualifiers when
        folding address expressions.
        * gimple.c (gimple_ior_addresses_taken_1): Use get_base_address.
        * tree-ssa-alias.c (decl_refs_may_alias_p): Do not use
        operand_equal_p to compare decls.
        (ptr_deref_may_alias_decl_p): Likewise.
        * tree-ssa-operands.c (get_asm_expr_operands): Simplify
        * tree-ssa-forwprop.c (forward_propagate_into_gimple_cond):
        Handle reversed comparison ops.
        * tree-sra.c (asm_visit_addr): Use get_base_address.
        * ipa-prop.c (visit_store_addr_for_mod_analysis): Use get_base_address.
        * ipa-reference.c (mark_address): Use get_base_address.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * tree-ssa-forwprop.c (forward_propagate_addr_expr):
        Propagate constants everywhere.

2010-04-07  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43516
        * tree.c (MAX_INT_CACHED_PREC): Define.
        (nonstandard_integer_type_cache): New array.
        (build_nonstandard_integer_type): Cache results for precision
        <= MAX_INT_CACHED_PREC.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        * doc/invoke.texi (-fargument-alias, -fargument-noalias,
        -fargument-noalias-global, -fargument-noalias-anything): Remove.
        * common.opt: Likewise.
        * tree-ssa-structalias.c (intra_create_variable_infos): Adjust comment.
        * alias.c (base_alias_check): Remove flag_argument_noalias handling.
        (nonoverlapping_memrefs_p): Likewise.
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Likewise.
        * opts.c (common_handle_option): Handle OPT_fargument_alias,
        OPT_fargument_noalias, OPT_fargument_noalias_anything and
        OPT_fargument_noalias_global for backward compatibility.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43270
        * tree-vrp.c (check_array_ref): Fix flexible array member detection.
        * tree-ssa-sccvn.h (fully_constant_vn_reference_p): Declare.
        * tree-ssa-pre.c (phi_translate_1): Adjust.
        (fully_constant_expression): Split out vn_reference handling to ...
        * tree-ssa-sccvn.c (fully_constant_vn_reference_p): ... here.
        Fold reads from constant strings.
        (vn_reference_lookup): Handle fully constant references.
        (vn_reference_lookup_pieces): Likewise.
        * Makefile.in (expmed.o-warn): Add -Wno-error.

2010-04-07  Martin Jambor  <mjambor@suse.cz>

        * tree-sra.c (find_param_candidates): Allow scalar va_list types.

2010-04-07  Iain Sandoe  <iains@gcc.gnu.org>

        PR driver/41594
        * gcc.c: Add -static-libstdc++ to list of recognized options.

2010-04-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (i[34567]86-*-solaris2*): Default with_tune_32 to generic.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * expr.c (expand_expr_real_1): For TARGET_MEM_REFs with pointer
        bases build simple mem attributes to retain points-to information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * alias.c (ao_ref_from_mem): Without MEM_OFFSET or MEM_SIZE
        preserve points-to related information.

2010-04-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42617
        * emit-rtl.c (set_mem_attributes_minus_bitpos): Do not
        discard plain indirect references.
        * fold-const.c (operand_equal_p): Guard against NULL_TREE type.
        * tree.c (tree_nop_conversion): Likewise.

2010-04-07  Dodji Seketeli  <dodji@redhat.com>

        PR debug/43628
        * dwarf2out.c (modified_type_die): Ignore artificial typedefs.

2010-04-06  Kai Tietz  <kai.tietz@onevision.com>

        * config/i386/i386.c (ix86_handle_cconv_attribute): Ignore
        calling convention attributes on METHOD_TYPEs for w64 ABI, too.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Sort static functions in topological order.

2010-04-07  Sebastian Pop  <sebastian.pop@amd.com>

        * tree-if-conv.c: Fix indentation and comments.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (max_signed_precision_type): Use
        lang_hooks.types.type_for_size instead of
        build_nonstandard_integer_type.
        When converting an unsigned type to signed, double its precision.
        (gcc_type_for_interval): Use lang_hooks.types.type_for_size.
        (gcc_type_for_iv_of_clast_loop): Call max_signed_precision_type.
        (graphite_create_new_loop_guard): When ub + 1 wraps around,
        use lb <= ub.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * graphite-clast-to-gimple.c (graphite_create_new_loop_guard): Use
        POINTER_PLUS_EXPR for pointer types.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43519
        * Makefile.in (graphite-clast-to-gimple.o): Depends on langhooks.h.
        * graphite-clast-to-gimple.c: Include langhooks.h.
        (max_signed_precision_type): New.
        (max_precision_type): Takes two types as arguments.
        (precision_for_value): New.
        (precision_for_interval): New.
        (gcc_type_for_interval): New.
        (gcc_type_for_value): New.
        (gcc_type_for_clast_term): New.
        (gcc_type_for_clast_red): New.
        (gcc_type_for_clast_bin): New.
        (gcc_type_for_clast_expr): Split up into several functions.
        (gcc_type_for_clast_eq): Rewritten.
        (compute_bounds_for_level): New.
        (compute_type_for_level_1): New.
        (compute_type_for_level): New.
        (gcc_type_for_cloog_iv): Removed.
        (gcc_type_for_iv_of_clast_loop): Rewritten.
        (graphite_create_new_loop): Compute the lower and upper bound types
        with gcc_type_for_clast_expr.
        (graphite_create_new_loop_guard): Same.
        (find_cloog_iv_in_expr): Removed.
        (compute_cloog_iv_types_1): Removed.
        (compute_cloog_iv_types): Removed.
        (gloog): Do not call compute_cloog_iv_types.
        * graphite-sese-to-poly.c (new_gimple_bb): Do not initialize
        GBB_CLOOG_IV_TYPES.
        (free_data_refs_aux): Do not free GBB_CLOOG_IV_TYPES.
        * sese.h (struct gimple_bb): Removed field cloog_iv_types.
        (GBB_CLOOG_IV_TYPES): Removed.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Assert that
        gimple_phi_num_args of the loop close SSA phi node is equal to 1.
        (detect_commutative_reduction): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (graphite_verify): Remove redundant
        call to verify_ssa.  Invoke verify_loop_closed_ssa with an extra
        argument.
        * graphite-scop-detection.c (canonicalize_loop_closed_ssa_form): Same.
        * graphite-sese-to-poly.c (rewrite_reductions_out_of_ssa): Same.
        (rewrite_commutative_reductions_out_of_ssa): Same.
        * passes.c (execute_function_todo): Call verify_ssa for every pass
        in the LNO.  Invoke verify_loop_closed_ssa with an extra argument.
        * tree-flow.h (verify_loop_closed_ssa): Update declaration.
        * tree-parloops.c (parallelize_loops): Invoke verify_loop_closed_ssa
        with an extra argument.
        * tree-ssa-loop-manip.c (check_loop_closed_ssa_stmt): Same.  Call
        verify_ssa only when the extra argument is true.
        (gimple_duplicate_loop_to_header_edge): Invoke verify_loop_closed_ssa
        with an extra argument.
        (tree_transform_and_unroll_loop): Same.

2010-04-06  Sebastian Pop  <sebastian.pop@amd.com>

        * passes.c (execute_function_todo): Call verify_loop_closed_ssa
        for all the passes of the LNO having LOOP_CLOSED_SSA.
        * tree-if-conv.c (pass_if_conversion): Remove TODO_verify_loops.
        * tree-loop-distribution.c (pass_loop_distribution): Same.
        * tree-pass.h (TODO_verify_loops): Removed.
        * tree-ssa-loop.c (pass_tree_loop_init): Same.
        (pass_lim): Same.
        (pass_tree_unswitch): Same.
        (pass_predcom): Same.
        (pass_vectorize): Same.
        (pass_linear_transform): Same.
        (pass_graphite_transforms): Same.
        (pass_iv_canon): Same.
        (pass_complete_unroll): Same.
        (pass_complete_unrolli): Same.
        (pass_parallelize_loops): Same.
        (pass_loop_prefetch): Same.
        (pass_iv_optimize): Same.

2010-04-06  Changpeng Fang  <changpeng.fang@amd.com>

        PR middle-end/32824
        * passes.c (init_optimization_passes): Move pass_lim before
        pass_copy_prop and pass_dce_loop.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        PR target/43667
        * config/i386/i386.c (bdesc_multi_arg): Use OPTION_MASK_ISA_XOP
        instead of OPTION_MASK_ISA_AVX for __builtin_ia32_vpermil2p*.
        (ix86_expand_args_builtin): Use V*_FTYPE_* enum codes instead of
        MULTI_* defines for 4 argument vpermil2p* builtins.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386-protos.h (x86_maybe_negate_const_int): Declare.
        * config/i386/i386.c (x86_maybe_negate_const_int): New.
        (x86_output_mi_thunk): Use x86_maybe_negate_const_int.
        * config/i386/i386.md (*add<mode>_1, *addsi_1_zext, *addhi_1,
        *addhi_1_lea, *addqi_1, *addqi_1_lea, *addqi_1_slp, *add<mode>_2,
        *addsi_2_zext, *addhi_2, *addqi_2, *add<mode>_3, *addsi_3_zext,
        *addhi_3, *addqi_3,*add<mode>_5, *addhi_5, *addqi_5):
        Use x86_maybe_negate_const_int to output insn mnemonic.
        (*adddi_4, *addsi_4, *addhi_4, *addqi_4): Ditto.  Remove overflow
        check from instruction predicate.  Update comments.
        * config/i386/sync.md (sync_add<mode>): Use
        x86_maybe_negate_const_int to output insn mnemonic.

2010-04-06  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/42906
        * tree-ssa-dce.c (mark_control_dependent_edges_necessary): Add
        IGNORE_SELF argument.  Set visited_control_parents for fully
        processed BBs.
        (find_obviously_necessary_stmts): Update call of
        mark_control_dependent_edges_necessary.
        (propagate_necessity): Likewise.  Handle PHI edges more curefully.

2010-04-06  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.md: Remove comment about 'e' and 'E'
        operand modifier.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43627
        * tree-vrp.c (extract_range_from_unary_expr): Widenings
        of [1, +INF(OVF)] go to [1, +INF(OVF)] of the wider type,
        not varying.

2010-04-06  Jakub Jelinek  <jakub@redhat.com>

        * BASE-VER: Change to 4.6.0.

        PR target/43638
        * config/i386/i386.c (print_operand): Remove 'e' and 'E' code
        handling.

2010-04-06  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43661
        * fold-const.c (fold_comparison): Handle X * 0 CMP 0.

2010-04-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/invoke.texi (Optimize Options): Document that LTO
        won't remove object access purely due to incompatible
        declarations.

2010-04-04  Matthias Klose  <doko@ubuntu.com>

        * graphite-sese-to-poly.c (translate_scalar_reduction_to_array):
        Initialize variable.

2010-04-03  Richard Guenther  <rguenther@suse.de>

        PR middle-end/42509
        * alias.c (nonoverlapping_memrefs_p): For spill-slot accesses
        require a non-NULL MEM_OFFSET.

2010-04-02  Steven Bosscher  <steven@gcc.gnu.org>

        * ada/gcc-interface/Make-lang.in, alias.c, attribs.c, auto-inc-dec.c,
        basic-block.h, bb-reorder.c, calls.c, c-common.c, cgraph.h,
        collect2.h, config/alpha/alpha.c, config/alpha/alpha.md,
        config/alpha/predicates.md, config/arm/arm.md,
        config/arm/lib1funcs.asm, config/arm/neon-schedgen.ml,
        config/avr/avr.c, config/avr/avr.md, config/bfin/bfin.c,
        config/darwin9.h, config/darwin.c, config/darwin.h,
        config/h8300/h8300.c, config/i386/cpuid.h, config/i386/cygming.h,
        config/i386/cygwin.h, config/i386/mingw32.h, config/i386/msformat-c.c,
        config/i386/sol2-10.h, config/i386/xopintrin.h, config/ia64/ia64.c,
        config/ia64/ia64.md, config/ia64/sync.md, config/mep/mep.c,
        config/mips/mips.md, config/mn10300/mn10300.c,
        config/mn10300/mn10300.h, config/pa/pa.c, config/pa/pa.md,
        config/rs6000/aix.h, config/rs6000/dfp.md,
        config/rs6000/rs6000-builtin.def, config/rs6000/rs6000-c.c,
        config/rs6000/vector.md, config/rtems.h, config/rx/rx.md,
        config/s390/s390.md, config/sol2-c.c, config/sparc/sol2-bi.h,
        config/sparc/sol2-gas.h, config/sparc/sparc.h, config/sparc/sparc.md,
        config/sparc/sparc-protos.h, config/spu/spu.c, config/spu/spu-c.c,
        config/t-darwin, convert.c, c.opt, c-opts.c, cp/Make-lang.in,
        c-pretty-print.c, c-typeck.c, df-core.c, df-scan.c, diagnostic.c,
        diagnostic.h, doc/cppopts.texi, doc/cpp.texi, doc/extend.texi,
        doc/gimple.texi, doc/languages.texi, doc/plugins.texi, doc/rtl.texi,
        doc/standards.texi, doc/tree-ssa.texi, doc/trouble.texi, dominance.c,
        fold-const.c, fortran/Make-lang.in, fwprop.c, gcc-plugin.h,
        gensupport.c, gimple.h, gimple-iterator.c, graphite.c,
        graphite-clast-to-gimple.c, graphite-clast-to-gimple.h,
        graphite-dependences.c, graphite-poly.c, graphite-poly.h,
        graphite-ppl.c, graphite-ppl.h, graphite-scop-detection.c,
        graphite-sese-to-poly.c, graphite-sese-to-poly.h, ifcvt.c, intl.c,
        intl.h, ipa.c, ipa-cp.c, ipa-inline.c, ipa-prop.c, ipa-prop.h,
        ipa-pure-const.c, ipa-reference.c, ipa-type-escape.c, ira-color.c,
        ira-conflicts.c, ira-lives.c, java/Make-lang.in, lambda-code.c,
        loop-invariant.c, lto/Make-lang.in, lto-streamer.h, lto-streamer-in.c,
        objc/Make-lang.in, objcp/Make-lang.in, omp-low.c, optc-gen.awk,
        opt-functions.awk, opth-gen.awk, params.def, passes.c,
        postreload-gcse.c, print-tree.c, recog.c, regrename.c, reload.h,
        rtl.def, sched-int.h, sched-rgn.c, sel-sched-dump.c, sese.c, sese.h,
        store-motion.c, stor-layout.c, tree-cfgcleanup.c, tree-chrec.c,
        tree-complex.c, tree-data-ref.c, tree.def, tree-eh.c, tree-flow.h,
        tree-flow-inline.h, tree.h, tree-loop-distribution.c, tree-outof-ssa.c,
        tree-parloops.c, tree-pass.h, tree-predcom.c, tree-profile.c,
        tree-scalar-evolution.c, tree-ssa-address.c, tree-ssa-alias.c,
        tree-ssa-coalesce.c, tree-ssa-copy.c, tree-ssa-dce.c, tree-ssa-dom.c,
        tree-ssa-dse.c, tree-ssa-loop-im.c, tree-ssa-loop-ivcanon.c,
        tree-ssa-loop-manip.c, tree-ssa-math-opts.c, tree-ssa-operands.c,
        tree-ssa-pre.c, tree-ssa-sccvn.c, tree-ssa-structalias.c,
        tree-ssa-uncprop.c, tree-tailcall.c, tree-vect-data-refs.c,
        tree-vect-loop.c, tree-vectorizer.h, tree-vect-slp.c, tree-vrp.c,
        unwind-dw2-fde-darwin.c, varpool.c: Update copyright years.

2010-04-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        PR other/43620
        * doc/install.texi (Prerequisites): Bump Automake version to 1.11.1.
        * aclocal.m4: Regenerate.

2010-04-02  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43629
        * tree-ssa-ccp.c (likely_value): Reset all_undefined_operands
        if we have seen a constant value.

2010-04-02  Joseph Myers  <joseph@codesourcery.com>

        * read-rtl.c (read_rtx_1): Give an error for EOF while looking for ']'.

2010-04-02  Richard Earnshaw  <rearnsha@arm.com>

        PR target/43469
        * arm.c (legitimize_tls_address): Adjust call to
        gen_tls_load_dot_plus_four.
        (arm_note_pic_base): New function.
        (arm_cannot_copy_insn_p): Use it.
        * thumb2.md (tls_load_dot_plus_four): Rework to avoid use of '+' in
        constraint.

2010-04-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        PR bootstrap/43531

        Revert:
        2009-09-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * Makefile.in ($(out_object_file)): Depend on
        gt-$(basename $(notdir $(out_file))).h.

2010-04-01  Ralf Corsépius <ralf.corsepius@rtems.org>

        * config.gcc (lm32-*-rtems*): Add t-lm32.

2010-04-01  Joel Sherrill <joel.sherrill@oarcorp.com>

        * config.gcc: Add lm32-*-rtems*.
        * config/lm32/rtems.h: New file.

2010-04-01  Dave Korn  <dave.korn.cygwin@gmail.com>

        PR target/42609
        * config/i386/cygwin.h (CXX_WRAP_SPEC): Disable spec when -mno-cygwin.

2010-04-01  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (output_compilation_unit_header): For
        -gdwarf-4 use version 4 instead of version 3.
        (output_line_info): For version 4 and above emit additional
        maximum ops per insn header field.
        (DWARF_LINE_DEFAULT_MAX_OPS_PER_INSN): Define.

        * dwarf2out.c (is_c_family, is_java): Remove.
        (lower_bound_default): New function.
        (add_bound_info, gen_descr_array_type_die): Use it.

2010-04-01  Dodji Seketeli  <dodji@redhat.com>

        PR debug/43325
        * dwarf2out.c (gen_variable_die): Allow debug info for variable
        re-declaration when it happens in a function.

2010-04-01  Aldy Hernandez  <aldyh@redhat.com>

        * cgraph.c (cgraph_add_function_insertion_hook): Update comment.
        (cgraph_remove_function_insertion_hook): Same.
        (cgraph_call_function_insertion_hooks): Same.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43614
        * tree-ssa-address.c (copy_mem_ref_info): Copy TREE_SIDE_EFFECTS
        and TREE_THIS_VOLATILE.
        (copy_ref_info): Likewise.
        * tree-ssa-operands.c (get_tmr_operands): Check TREE_THIS_VOLATILE.
        * tree.c (build6_stat): Ignore side-effects of all but arg5
        for TARGET_MEM_REF.  Set TREE_THIS_VOLATILE from arg5 of
        TARGET_MEM_REF.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43607
        * ipa-type-escape.c (check_call): Do not access non-existing
        arguments.

2010-04-01  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43602
        Revert
        2010-03-30  Seongbae Park <seongbae.park@gmail.com>
                    Jack Howarth <howarth@bromo.med.uc.edu>

        * tree-profile.c (tree_init_ic_make_global_vars): Make static
        variables TLS.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Prerequisites): Document libelf usability on
        IRIX 5/6 and Solaris 2.
        (Specific, i?86-*-solaris2.10): No 64-bit default configuration.
        Update GNU as, GNU ld requirements.
        (Specific, *-*-solaris2*): Document Solaris 7 obsoletion, removal.
        Document Sun Studio compiler download.
        Update and simplify as, ld recommendations.
        (Specific, *-*-solaris2.7): Note obsoletion, removal.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config.gcc (i[34567]86-*-solaris2*): Default with_arch_32,
        with_tune_32 to pentium4.

2010-04-01  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/cpuid.h (__get_cpuid_max): Move misplaced comment.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, mips-sgi-irix5): Document IRIX 5
        obsoletion, removal.
        Update IDO URL.
        Document GNU as requirement.
        Update configure requirements.
        (Specific, mips-sgi-irix6): Document IRIX 6 < 6.5 obsoletion, removal.
        Recomment IRIX 6.5.18+.
        Document IDF/IDL requirement.
        Document GNU as requirement.
        Document GNU ld bootstrap failure.
        Remove freeware.sgi.com reference.

2010-04-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/install.texi (Specific, alpha*-dec-osf*): Document Tru64
        UNIX V4.0, V5.0 obsoletion, removal.
        Remove --with-gc=simple reference.
        Update VM requirements during bootstrap.
        Remove -oldas bootstrap description.
        Update binutils reference.
        Remove comparison failure note.

2010-03-31  Richard Guenther  <rguenther@suse.de>
            Zdenek Dvorak  <ook@ucw.cz>
            Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43464
        * tree-ssa-copy.c (init_copy_prop): Handle loop close phi nodes
        with multiple arguments.
        (execute_copy_prop): Remove call to rewrite_into_loop_closed_ssa.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-dependences.c (print_pddr): Call print_pdr with an
        extra argument.
        * graphite-poly.c (debug_pdr): Add an extra argument for the
        verbosity level.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (print_pbb): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_cloog): Same.
        (debug_pbb_domain): Same.
        (debug_pbb): Same.
        (print_pdrs): Same.
        (debug_pdrs): Same.
        (debug_scop_context): Same.
        (debug_scop): Same.
        (debug_cloog): Same.
        (print_scop_params): Same.
        (debug_scop_params): Same.
        (print_iteration_domain): Same.
        (print_iteration_domains): Same.
        (debug_iteration_domain): Same.
        (debug_iteration_domains): Same.
        (print_scattering_function): Same.
        (print_scattering_functions): Same.
        (debug_scattering_function): Same.
        (debug_scattering_functions): Same.
        * graphite-poly.h (debug_pdr): Update declaration.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (print_pbb): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_cloog): Same.
        (debug_pbb_domain): Same.
        (debug_pbb): Same.
        (print_pdrs): Same.
        (debug_pdrs): Same.
        (debug_scop_context): Same.
        (debug_scop): Same.
        (debug_cloog): Same.
        (print_scop_params): Same.
        (debug_scop_params): Same.
        (print_iteration_domain): Same.
        (print_iteration_domains): Same.
        (debug_iteration_domain): Same.
        (debug_iteration_domains): Same.
        (print_scattering_function): Same.
        (print_scattering_functions): Same.
        (debug_scattering_function): Same.
        (debug_scattering_functions): Same.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.c (print_scattering_function_1): New.
        (print_scattering_function): Call it.
        (print_scop_params): Remove spaces at the end of lines.
        (print_cloog): New.
        (debug_cloog): New.
        * graphite-poly.h (print_cloog): Declared.
        (debug_cloog): Declared.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (graphite_loop_normal_form): Add the IV bump
        in loop->header.
        * tree-flow.h (canonicalize_loop_ivs): Updated declaration.
        * tree-parloops.c (gen_parallel_loop): Add the IV bump in loop->latch.
        * tree-ssa-loop-manip.c (canonicalize_loop_ivs): Add a new parameter
        to switch between adding the IV bump in loop->latch or in loop->header.

2010-03-31  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.c (print_scattering_function): Pretty print following
        the scoplib format.
        (print_pdr): Same.
        (print_pbb_domain): Same.
        (dump_gbb_cases): Same.
        (dump_gbb_conditions): Same.
        (print_pdrs): Same.
        (print_pbb): Same.
        (print_scop_params): Same.
        (print_scop_context): Same.
        (print_scop): Same.
        (print_pbb_body): New.
        (lst_indent_to): New.
        (print_lst): Start new lines with a #.
        * graphite-poly.h (pbb_bb): New.
        (pbb_index): Use pbb_bb.
        * graphite-ppl.c (ppl_print_powerset_matrix): Print the number of
        disjuncts.
        * tree-data-ref.c (dump_data_reference): Start new lines with a #.

2010-03-31  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (size_of_die): For -gdwarf-4 use
        uleb128 size instead of fixed 1 or 2 for dw_val_class_loc
        and 0 instead of 1 for dw_val_class_flag.
        (value_format): For -gdwarf-4 use DW_FORM_sec_offset for
        dw_val_class_range_list, dw_val_class_loc_list,
        dw_val_class_lineptr and dw_val_class_macptr, use
        DW_FORM_flag_present for dw_val_class_flag and
        DW_FORM_exprloc for dw_val_class_loc.
        (output_die): For -gdwarf-4 print dw_val_class_loc
        size as uleb128 instead of 1 or 2 bytes and don't print
        anything for dw_val_class_flag.

        * var-tracking.c (vt_init_cfa_base): Use cselib_lookup_from_insn
        instead of cselib_lookup following by tweaking locs->setting_insn.

        PR bootstrap/43596
        * cselib.c (cselib_process_insn): Clear cselib_current_insn
        even before returning from label, setjmp call or volatile asm
        handling.

2010-03-31  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43600
        * cgraphunit.c (cgraph_output_in_order): Do not allocate
        temporary data on stack.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sparc/sysv4.h (PUSHSECTION_FORMAT): Remove undef.
        (PUSHSECTION_ASM_OP): Remove.
        (POPSECTION_ASM_OP): Remove.
        (PUSHSECTION_FORMAT): Remove.
        * config/sol2.h (PUSHSECTION_FORMAT): Define.
        * config/sparc/sol2.h [!USE_GAS] (PUSHSECTION_FORMAT): Redefine.
        * config/sol2.c (solaris_output_init_fini): Use it.

2010-03-31  Jie Zhang  <jie@codesourcery.com>

        PR 43574
        * opt-functions.awk (var_type_struct): Use signed char type
        for simple variables.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/sol2.c: Include output.h.
        (solaris_assemble_visibility): New function.
        * config/t-sol2 (sol2.o): Add output.h dependency.
        * config/sol2-protos.h (solaris_assemble_visibility): Declare.
        * config/sol2.h [!USE_GAS] (TARGET_ASM_ASSEMBLE_VISIBILITY):
        Redefine.

2010-03-31  Jakub Jelinek  <jakub@redhat.com>

        PR target/43580
        * config/arm/arm.c (arm_save_coproc_regs): Use Pmode instead of
        V2SImode or XFmode on PRE_DEC.

        PR debug/43557
        * cfgexpand.c (expand_debug_expr): Handle VOIDmode mode like
        BLKmode.

2010-03-31  Jie Zhang  <jie@codesourcery.com>

        PR 43562
        * reload.h (caller_save_initialized_p): Declare.
        * toplev.c (backend_init_target): Don't call
        init_caller_save but set caller_save_initialized_p to false.
        * caller-save.c (caller_save_initialized_p): Define.
        (init_caller_save): Check caller_save_initialized_p.
        * ira.c (ira): Call init_caller_save if flag_caller_saves.

2010-03-31  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/39048
        * config.gcc (i[34567]86-*-solaris2*): Add i386/t-fprules-softfp
        and soft-fp/t-softfp to tmake_file.
        * config/i386/sol2.h (LIBGCC2_HAS_TF_MODE): Redefine.
        (LIBGCC2_TF_CEXT): Define.
        (TF_SIZE): Define.

2010-03-30  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42977
        * cselib.c (n_useless_values): Document handling of debug locs.
        (n_useless_debug_values, n_debug_values): New variables.
        (new_elt_loc_list): Don't add to debug values, keep count.
        (promote_debug_loc): New.
        (cselib_reset_table): Zero new variables.
        (entry_and_rtx_equal_p): Promote debug locs.
        (discard_useless_locs): Increment n_useless_debug_values for
        debug values.
        (remove_useless_values): Adjust n_useless_values and n_debug_values
        with n_useless_debug_values.
        (add_mem_for_addr): Promote debug locs.
        (cselib_lookup_mem): Likewise.
        (cselib_lookup_addr): Renamed to...
        (cselib_lookup_addr_1): ... this.  Promote debug locs.  Don't call...
        (cselib_log_lookup): ... this.  Turn into...
        (cselib_lookup_addr): ... new wrapper.
        (cselib_lookup_from_insn): New.
        (cselib_invalidate_regno): Increment n_useless_debug_values for
        debug values.
        (cselib_invalidate_mem): Likewise.
        (cselib_process_insn): Take n_deleted and n_debug_values into
        account to guard remove_useless_value call.
        (cselib_finish): Zero n_useless_debug_values.
        * cselib.h (cselib_lookup_from_insn): Declare.
        * sched-deps.c (sched_analyze_1): Use cselib_lookup_from_insn.
        (sched_analyze_2): Likewise.

2010-03-30  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (use_narrower_mode_test, use_narrower_mode): New
        functions.
        (adjust_mems): Replace narrowing SUBREG of expression containing
        just PLUS, MINUS, MULT and ASHIFT of registers and constants
        with operations in the narrower mode.

        PR debug/43593
        * var-tracking.c (dataflow_set_clear_at_call): Invalidate just
        regs_invalidated_by_call instead all call_used_reg_set registers.

2010-03-30  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43430
        * tree-vect-slp.c (vect_get_and_check_slp_defs): Replace type
        pointer comparisons with types_compatible_p.
        * tree-vect-stmts.c (vectorizable_call): Same.
        (vectorizable_condition): Same.

2010-03-30  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        * config/s390/s390.c (s390_emit_prologue): Omit issuing a dynamic
        stack check if the mask would be zero.

2010-03-30  Seongbae Park <seongbae.park@gmail.com>
            Jack Howarth <howarth@bromo.med.uc.edu>

        * tree-profile.c (tree_init_ic_make_global_vars): Make static
        variables TLS.

2010-03-30  Joseph Myers  <joseph@codesourcery.com>

        PR other/25232
        * libgcc-std.ver (GCC_4.5.0): Define version.  Include __unordxf2
        and __unordtf2.
        * config/bfin/libgcc-bfin.ver (GCC_4.5.0): Define version.
        Include ___unordxf2 and ___unordtf2.
        * config/i386/libgcc-glibc.ver: Do not define inheritance from
        GCC_4.4.0 here.

2010-03-30  Tarik Graba  <tarik.graba@telecom-paristech.fr>

        * config/lm32/t-lm32: New file.
        * config.gcc: Use the above file when targetting lm32.

2010-03-28  Duncan Sands  <baldrick@free.fr>

        * Makefile.in (PLUGIN_HEADERS): Add except.h.

2010-03-29  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43431
        * tree-vect-loop.c (vect_estimate_min_profitable_iters):
        Improve vectorization cost model diagnostic.

2010-03-29  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43436
        * tree-vect-data-refs.c (vect_analyze_data_refs): When
        compute_data_dependences_for_loop returns false, early exit
        and output an extra diagnostic for the failed data reference
        analysis.

2010-03-29  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43560
        * tree-ssa-loop-im.c (ref_always_accessed_p): Add store_p parameter.
        (can_sm_ref_p): Treat stores to readonly locations as trapping.

2010-03-29  Jie Zhang  <jie@codesourcery.com>

        PR 43564
        * toplev.c (process_options): Set optimization_default_node
        and optimization_current_node.
        * opts.c (decode_options): Don't set optimization_default_node
        and optimization_current_node.

2010-03-29  Ralf Corsépius  <ralf.corsepius@rtems.org>

        * config/rtems.h: Abandon -qrtems_debug.

2010-03-28  Jan Hubicka  <jh@suse.cz>

        PR tree-optimization/43505
        * cgraph.c (cgraph_clone_node): When clonning a clone, replacement
        map should not be copied.

2010-03-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/41674
        * cgraphunit.c (cgraph_build_static_cdtor): If target doesn't have
        cdtors, set DECL_PRESERVE_P.
        * ipa.c (cgraph_externally_visible_p): Return true if declaration
        should be preseved.

2010-03-27  Uros Bizjak  <ubizjak@gmail.com>

        PR tree-optimization/43528
        * stor-layout.c (place_field): Check that constant fits into
        unsigned HWI when skipping calculation of MS bitfield layout.

2010-03-27  Jan Hubicka  <jh@suse.cz>

        PR middle-end/43391
        * varasm.c (make_decl_rtl): Deal with COMMON flag to make
        notice_global_symbol work.

2010-03-27  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (dwarf2_debug_hooks): Use dwarf2out_function_decl
        instead of dwarf2out_decl.
        (struct var_loc_node): Remove section_label field.
        (dwarf2out_function_decl): New function.
        (dwarf2out_var_location): Don't set section_label field.
        (dwarf2out_begin_function): Don't empty decl_loc_table here.

2010-03-26  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR tree-optimization/43544
        * doc/tm.texi (TARGET_VECTORIZE_BUILTIN_VECTORIZED_FUNCTION):
        First argument for builtin vectorized function hook is now a
        tree to be able to distinguish between machine specific and
        standard builtins.
        * targhooks.c (default_builtin_vectorized_function): Ditto.
        * targhooks.h (default_builtin_vectorized_function): Ditto.
        * target.h (struct gcc_target): Ditto.
        * tree-vect-stmts.c (vectorizable_function): Ditto.
        * config/i386/i386.c (ix86_builtin_vectorized_function): Ditto.
        * config/rs6000/rs6000.c (rs6000_builtin_vectorized_function):
        Ditto.

2010-03-26  Joseph Myers  <joseph@codesourcery.com>

        PR c/43381
        * c-decl.c (get_parm_info): Assert that decl going in OTHERS has a
        nested binding iff it is a FUNCTION_DECL.
        (store_parm_decls_newstyle): Pass nested=true to bind for
        FUNCTION_DECLs amongst parameters.

2010-03-26  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (vt_expand_loc_callback): Don't run
        cselib_expand_value_rtx_cb in dummy mode if
        cselib_dummy_expand_value_rtx_cb returned false.

        * var-tracking.c (emit_note_insn_var_location): For one part
        notes with offset 0, don't add EXPR_LIST around the location.
        * dwarf2out.c (loc_descriptor, dw_loc_list_1,
        add_location_or_const_value_attribute): Adjust for that change.

        PR debug/43540
        * dwarf2out.c (reg_save): For DW_CFA_expression put regnum
        into first operand and location into second.
        (dw_cfi_oprnd1_desc): Return dw_cfi_oprnd_reg_num instead of
        dw_cfi_oprnd_loc for DW_CFA_expression.
        (dw_cfi_oprnd2_desc): Return dw_cfi_oprnd_loc for DW_CFA_expression.
        (output_cfa_loc, output_cfa_loc_raw): For DW_CFA_expression
        assume first argument is regnum and second argument is location.

2010-03-26  Uros Bizjak  <ubizjak@gmail.com>

        PR target/42113
        * config/alpha/alpha.md (*cmp_sadd_si): Change mode
        of scratch register to DImode.  Split to DImode comparison operator.
        Use SImode subreg of scratch register in the multiplication.
        (*cmp_sadd_sidi): Ditto.
        (*cmp_ssub_si): Ditto.
        (*cmp_ssub_sidi): Ditto.

2010-03-26  Uros Bizjak  <ubizjak@gmail.com>

        PR target/43524
        * config/i386/i386.c (ix86_expand_prologue) [TARGET_STACK_PROBE]:
        Remove invalid assert and wrong comment.

2010-03-26  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43516
        * flags.h (final_insns_dump_p): New extern.
        * final.c (final_insns_dump_p): New variable.
        (rest_of_clean_state): Set it before -fdump-final-insns=
        dumping, clear afterwards.
        * print-rtl.c (print_rtx): If final_insns_dump_p don't dump
        MEM_ALIAS_SET on MEMs.

2010-03-26  David S. Miller  <davem@davemloft.net>

        * configure.ac: Fix sparc GOTDATA_OP bug check.
        * configure: Rebuild.

2010-03-26  Alan Modra  <amodra@gmail.com>

        * config/rs6000/rs6000.md (cmptf_internal2): Correct comparison.

2010-03-25  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/tm.texi (Sections): Document TLS_COMMON_ASM_OP,
        TLS_SECTION_ASM_FLAG.

2010-03-25  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43511
        * config/i386/i386.c (ix86_code_end): Set DECL_WEAK if TARGET_MACHO.
        Clear first_function_block_is_cold.

        PR c/43385
        * gimplify.c (gimple_boolify): Only recurse on __builtin_expect
        argument if the argument is truth_value_p.

2010-03-24  Michael Meissner  <meissner@linux.vnet.ibm.com>

        * config/rs6000/constraints.md: Update copyright year for my changes.

        PR target/43484
        * config/rs6000/rs6000.c (rs6000_split_multireg_move): If r0 is
        used in reg+reg addressing, swap registers.

2010-03-24  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43293
        * target.h (struct gcc_target): Add code_end hook.
        * target-def.h (TARGET_ASM_CODE_END): Define to hook_void_void
        if not yet defined.
        (TARGET_ASM_OUT): Add TARGET_ASM_CODE_END.
        * toplev.c (compile_file): Call targetm.asm_out.code_end
        hook before unwind info/debug info output.
        * config/i386/winnt.c (i386_pe_file_end): Don't call ix86_file_end.
        * config/i386/linux.h (NEED_INDICATE_EXEC_STACK): Don't define.
        (TARGET_ASM_FILE_END): Define to file_end_indicate_exec_stack.
        * config/i386/linux64.h (NEED_INDICATE_EXEC_STACK): Don't define.
        (TARGET_ASM_FILE_END): Define to file_end_indicate_exec_stack.
        * config/i386/i386.c (ix86_file_end): Renamed to...
        (ix86_code_end): ... this.  Make static.  Don't call
        file_end_indicate_exec_stack.  Emit unwind info using
        final_start_function/final_end_function.
        (darwin_x86_file_end): Remove.
        (TARGET_ASM_CODE_END): Define.
        * config/i386/i386.h (TARGET_ASM_FILE_END,
        NEED_INDICATE_EXEC_STACK): Don't define.
        * config/i386/darwin.h (darwin_x86_file_end): Remove prototype.
        (TARGET_ASM_FILE_END): Define to darwin_file_end.
        * config/i386/i386-protos.h (ix86_file_end): Remove prototype.
        * doc/tm.texi (TARGET_ASM_CODE_END): Document.

        PR target/43498
        * config/i386/i386.c (x86_output_mi_thunk): Call final_start_function
        at the beginning and final_end_function at the end.
        * config/s390/s390.c (s390_output_mi_thunk): Likewise.

2010-03-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * configure.ac (i[34567]86-*-*): Handle Solaris 2/x86 TLS support
        and Sun as TLS syntax.
        (TLS_SECTION_ASM_FLAG) [on_solaris && !gas_flag]: Define.
        * configure: Regenerate.
        * config.in: Regenerate.
        * varasm.c (TLS_SECTION_ASM_FLAG): Define default.
        (default_elf_asm_named_section): Use it.
        * config/i386/i386.c (output_pic_addr_const): Lowercase @DTPOFF.
        (i386_output_dwarf_dtprel): Likewise.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @GOTTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @GOTNTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @INDNTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @NTPOFF.
        (output_addr_const_extra): Likewise.
        (output_pic_addr_const): Lowercase @TPOFF.
        (output_addr_const_extra): Likewise.
        * config/i386/i386.md (*tls_global_dynamic_32_gnu): Lowercase @TLSGD.
        (*tls_global_dynamic_64): Likewise.
        (*tls_local_dynamic_base_32_gnu): Lowercase @TLSLDM.
        (*tls_local_dynamic_base_64): Lowercase @TLSLD.

        * defaults.h (TLS_COMMON_ASM_OP): Provide default.
        (ASM_OUTPUT_TLS_COMMON): Use it.
        * config/i386/sol2-gas.h (TLS_COMMON_ASM_OP): Undef.

        PR target/38118
        * config.gcc (sparc*-*-solaris2*) [$gas=yes]: Add usegas.h to tm_file.
        * config/sparc/sol2.h (ASM_OUTPUT_ALIGNED_COMMON): Move ...
        * config/sol2.h (ASM_OUTPUT_ALIGNED_COMMON): ... here.
        * config/i386/sol2-10.h (ASM_OUTPUT_ALIGNED_COMMON): Redefine.
        * config/i386/sol2.h (TARGET_SUN_TLS): Redefine.
        (ASM_DECLARE_OBJECT_NAME) [!USE_GAS]: Redefine.

2010-03-24  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * config/i386/i386.c (override_options): Don't accept
        -mtls-dialect=sun any longer.
        * config/i386/i386.h (TARGET_SUN_TLS): Define as 0.
        * config/i386/i386.md (*tls_global_dynamic_32_sun): Remove.
        (*tls_local_dynamic_base_32_sun): Likewise.
        * config/i386/sol2.h (TARGET_SUN_TLS): Redefine.

2010-03-24  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43508
        * dwarf2out.c (mem_loc_descriptor): Don't ICE on
        VEC_{MERGE,SELECT,CONCAT,DUPLICATE}.

        PR debug/43479
        * ira.c (adjust_cleared_regs): New function.
        (update_equiv_regs): Adjust cleared_regs in DEBUG_INSNs.

        PR debug/19192
        PR debug/43479
        * cfgexpand.c (gimple_assign_rhs_to_tree): Also set TREE_BLOCK
        from gimple_block.
        * expr.c (expand_expr_real): Restore previous
        curr_insn_source_location and curr_insn_block after
        expand_expr_real_1 call.
        (expand_expr_real_1) <case SSA_NAME>: Call expand_expr_real
        instead of expand_expr_real_1.

2010-03-23  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/43413
        * ira-color.c (setup_allocno_available_regs_num): Count prohibited
        hard regs too.

2010-03-22  James E. Wilson  <wilson@codesourcery.com>

        PR target/43348
        * ia64.md (call_nogp, call_value_nogp, sibcall_nogp, call_gp,
        call_value_gp, sibcall_gp): Use 's' constraint not 'i'.

2010-03-22  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/i386.c (ix86_target_string): Add -mfma.
        Fix a typo in comment.

2010-03-22  Mike Stump  <mikestump@comcast.net>

        PR target/23071
        * config/rs6000/rs6000.c (darwin_rs6000_special_round_type_align):
        Don't overly align based upon packed packed fields.

2010-03-22  Jason Merrill  <jason@redhat.com>

        * c-pretty-print.c (pp_c_specifier_qualifier_list) [VECTOR_TYPE]:
        Use () rather than [], and move before the element type.

2010-03-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/configfiles.texi (Configuration Files): Removed
        fixinc/Makefile*, intl/Makefile.*.
        * doc/makefile.texi: Fixed markup. Abstract from version
        control system used.
        (Makefile): Removed obsolete gcc/java/parse.y example.
        * doc/sourcebuild.texi: Likewise.
        (Top Level): Added config, gnattools, libdecnumber, libgcc,
        libgomp, libssp.  Removed fastjar.
        (Miscellaneous Docs): Clarify location.
        Added COPYING3, COPYING3.LIB.
        (Front End Directory): Moved Make-lang.in entry to new subsubsection.

2010-03-22  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR target/38085
        * config/i386/i386.c (x86_function_profiler)
        [!NO_PROFILE_COUNTERS]: Fix typo.
        * config/i386/gmon-sol2.c (_mcleanup) [__x86_64__]: Use call
        instead of callq.

2010-03-22  Janis Johnson  <janis187@us.ibm.com>
            Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/sourcebuild.texi (Test Directives): Split into six
        subsections, with most of the current text in new subsections
        Directives, Selectors, and Final Actions.
        (Directives): Split list of test directives into multiple
        subsubsections.
        (Selectors): Describe use and syntax of selectors.
        (Effective-Target Keywords): Describe all existing keywords.
        (Add Options): Describe features for dg-add-options.
        (Require Support): Describe variants of dg-require-support.
        (Final Actions): Describe commands to use in dg-final.

2010-03-22  Michael Matz  <matz@suse.de>

        PR middle-end/43475
        * recog.c (validate_replace_rtx_group): Replace also in
        REG_EQUAL and REG_EQUIV notes.

2010-03-22  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43390
        * tree-vect-stmts.c (get_vectype_for_scalar_type): Make
        sure vector extracts are type correct.

2010-03-22  Richard Guenther  <rguenther@suse.de>

        PR middle-end/40106
        * builtins.c (expand_builtin_pow): Expand pow (x, 1.5) as
        x * sqrt (x) even when optimizing for size if the target
        has native support for sqrt.

2010-03-22  Jakub Jelinek  <jakub@redhat.com>

        * varasm.c (make_decl_rtl_for_debug): Also clear
        flag_mudflap for the duration of make_decl_rtl call.

        PR debug/43443
        * var-tracking.c (add_cselib_value_chains): Remove ASM_OPERANDS
        locs from preserved VALUEs.

2010-03-21  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        PR middle-end/42718
        * pa.md (movmemsi): Set align to one if zero.
        (movmemdi): Likewise.

2010-03-21  Richard Earnshaw  <rearnsha@arm.com>

        PR target/42321
        * arm.c (arm_output_epilogue): Correctly match VFP pop instructions
        with their corresponding prologue pushes.

2010-03-20  Andrew Pinski  <pinskia@gmail.com>

        PR target/43156
        * config/spu/spu.c (spu_expand_prologue): Don't emit NOTE_INSN_DELETED
        at the begining or end.
        (spu_expand_epilogue): Likewise.

2010-03-20  Richard Guenther  <rguenther@suse.de>

        PR rtl-optimization/43438
        * combine.c (make_extraction): Properly zero-/sign-extend an
        extraction of the low part of a CONST_INT.  Also handle
        CONST_DOUBLE.

2010-03-19  Mike Stump  <mikestump@comcast.net>

        * config/i386/darwin.h (SUBTARGET32_DEFAULT_CPU): Add.
        * config/i386/i386.c (SUBTARGET32_DEFAULT_CPU): Add.
        (override_options): Use SUBTARGET32_DEFAULT_CPU.

2010-03-19  Andrew Pinski  <andrew_pinski@caviumnetworks.com>

        PR c/43211
        * c-decl.c (grokparms): Set arg_types to NULL_TREE if there was
        an error.

2010-03-19  Bernd Schmidt  <bernds@codesourcery.com>

        PR rtl-optimization/42258
        * ira-lives.c (check_and_make_def_conflict): Ignore conflict for a
        use that may match DEF.

        PR target/40697
        * optabs.c (avoid_expensive_constant): Use rtx_cost to find out
        the cost of loading the constant rather than assuming
        COSTS_N_INSNS (1).
        * config/arm/arm.c (thumb1_rtx_costs) <case CONST_INT>: If the
        outer code is AND, do the same tests as the andsi3 expander and
        return COSTS_N_INSNS (1) if and is cheap.

        * optabs.c (avoid_expensive_constant): Fix formatting.

2010-03-19  Michael Matz  <matz@suse.de>

        PR c++/43116
        * attribs.c (decl_attributes): When rebuilding a function pointer
        type use the same qualifiers as the original pointer type.

2010-03-19  Martin Jambor  <mjambor@suse.cz>

        * doc/gimple.texi (Logical Operators): Describe is_gimple_ip_invariant
        and is_gimple_ip_invariant_address.

2010-03-19  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        Revert
        2009-10-01  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        * config/arm/arm.c (arm_override_options): Turn off
        flag_dwarf2_cfi_asm for AAPCS variants.

2010-03-19  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

        PR target/43399
        * config/arm/arm.c (emit_multi_reg_push): Update comments.
        Use PRE_MODIFY instead of PRE_DEC.
        (emit_sfm): Use PRE_MODIFY instead of PRE_DEC.
        (vfp_emit_fstmd): Likewise.

2010-03-19  Michael Matz  <matz@suse.de>

        PR target/43305
        * builtins.c (expand_builtin_interclass_mathfn,
        expand_builtin_signbit): Use maybe_emit_unop_insn, emit libcalls
        if that fails.

2010-03-19  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43415
        * tree-ssa-pre.c (phi_translate): Split out worker to ...
        (phi_translate_1): ... this.
        (phi_translate): Move all caching here.  Cache all NARY
        and REFERENCE translations.

2010-03-19  David S. Miller  <davem@davemloft.net>

        With help from Eric Botcazou.
        * config/sparc/sparc.c: Include dwarf2out.h.
        (emit_pic_helper): Delete.
        (pic_helper_symbol_name): Delete.
        (pic_helper_emitted_p): Delete.
        (pic_helper_needed): New.
        (USE_HIDDEN_LINKONCE): Define to '1' if HAVE_GAS_HIDDEN else '0'.
        (get_pc_thunk_name): New.
        (load_pic_register): Remove 'delay_pic_helper' arg.  Use
        get_thunk_pc_name and ggc_strdup to generate PIC thunk symbol.
        Set pic_helper_needed to true.  Don't call emit_pic_helper.
        (sparc_expand_prologue): Update load_pic_register call.
        (sparc_output_mi_thunk): Likewise.
        (sparc_file_end): Emit a hidden comdat symbol for the PIC
        thunk if possible.  Output CFI information as needed.

2010-03-18  Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
            Jack Howarth <howarth@bromo.med.uc.edu>

        PR target/36399
        * config/i386/i386.h: Fix ABI on darwin x86-32.

2010-03-18  Aldy Hernandez  <aldyh@redhat.com>

        * tree.h: Declare make_decl_rtl_for_debug.
        * varasm.c (make_decl_rtl_for_debug): New.
        * dwarf2out.c (rtl_for_decl_location): Call it.
        * cfgexpand.c (expand_debug_expr): Call it.

2010-03-18  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43399
        * var-tracking.c (adjust_mems) <case POST_MODIFY>: Allow BLKmode
        mem_mode.

        PR bootstrap/43403
        * var-tracking.c (vt_init_cfa_base): Do nothing if
        cfa_base_rtx would be hard_frame_pointer_rtx or non-fixed register.

2010-03-18  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42873
        * var-tracking.c (canonicalize_vars_star): New.
        (dataflow_post_merge_adjust): Use it.

2010-03-18  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43058
        * var-tracking.c (non_suitable_const): New function.
        (add_uses): For DEBUG_INSNs with constants, don't record any
        value, instead just the constant value itself.
        (compute_bb_dataflow) <case MO_VAL_LOC>: If PAT_VAR_LOCATION_LOC
        is not VAR_LOC_UNKNOWN_P, set var to the constant.
        (emit_notes_in_bb): Likewise.
        (emit_note_insn_var_location): For onepart variables if
        cur_loc is a VOIDmode constant, use DECL_MODE.

2010-03-18  Martin Jambor  <mjambor@suse.cz>

        PR middle-end/42450
        * cgraph.h (cgraph_redirect_edge_call_stmt_to_callee): Declare.
        * cgraphunit.c (cgraph_materialize_all_clones): Update calls in
        all non-clones.  Moved call redirection...
        (cgraph_redirect_edge_call_stmt_to_callee): ...to this new function.
        (cgraph_materialize_all_clones): Dispose of all
        combined_args_to_skip bitmaps.
        (verify_cgraph_node): Do not check for edges pointing to wrong
        nodes in inline clones.
        * tree-inline.c (copy_bb): Call
        cgraph_redirect_edge_call_stmt_to_callee.
        * ipa.c (cgraph_remove_unreachable_nodes): Call
        cgraph_node_remove_callees even when there are used clones.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

        * config/i386/libgcc-glibc.ver: Make GCC_4.5.0 inherit GCC_4.4.0.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

        PR target/43383
        * config/i386/libgcc-glibc.ver: Add __extendxftf2 to GCC_4.5.0
        for 32bit.

2010-03-18  Michael Matz  <matz@suse.de>

        PR middle-end/43419
        * builtins.c (expand_builtin_pow): Don't transform pow(x, 0.5)
        into sqrt(x) if we need to preserve signed zeros.

2010-03-18  Steven Bosscher  <steven@gcc.gnu.org>
            Eric Botcazou  <ebotcazou@adacore.com>

        PR rtl-optimization/43360
        * loop-invariant.c (move_invariant_reg): Remove the REG_EQUAL
        note if we don't know its invariant status.

2010-03-18  Michael Matz  <matz@suse.de>

        PR tree-optimization/43402
        * tree-cfgcleanup.c (cleanup_control_expr_graph): Don't follow
        PHI chains of ssa names registered for update.

2010-03-17  Peter Bergner  <bergner@vnet.ibm.com>

        PR target/42427
        * config/rs6000/rs6000.c (rs6000_split_multireg_move): Add support for
        non-offsettable and pre_modify update addressing.
        * config/rs6000/dfp.md (*movdd_hardfloat32): Make the "0", "1"
        and "2" alternatives "#".
        (*movdd_softfloat32): Make all alternatives "#";
        * config/rs6000/rs6000.md (DIFD): New define_mode_iterator.
        (*movdf_hardfloat32): Make the "0", "1" and "2" alternatives "#".
        (*movdf_softfloat32): Make all alternatives "#";
        (movdi): Use the new DIFD mode iterator to create a common splitter
        for movdi, movdf and movdd patterns.

2010-03-18  Shujing Zhao  <pearly.zhao@oracle.com>

        * common.opt (dumpdir): Remove redundant tab.

2010-03-17  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43347
        * tree-sra.c (create_access_replacement): Set TREE_NO_WARNING when the
        original base is DECL_ARTIFICIAL or DECL_IGNORED_P.

2010-03-17  Bernd Schmidt  <bernd.schmidt@analog.com>

        PR rtl-optimization/42216
        * regrename.c (create_new_chain): New function, broken out from...
        (scan_rtx_reg): ... here.  Call it.  Handle the case where we are
        appending a use to an empty chain.
        (build_def_use): Remove previous changes that convert OP_INOUT to
        OP_OUT operands; instead detect the case where an OP_INOUT operand
        uses a previously untracked register and create an empty chain for it.

2010-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/extend.texi (Function Attributes): Rewrite unfinished
        sentence in ms_abi documentation.

2010-03-17  Alan Modra  <amodra@gmail.com>

        * config/rs6000/linux64.opt (mprofile-kernel): Use profile_kernel var.
        * config/rs6000/linux64.h (TARGET_PROFILE_KERNEL): Define.
        (SUBSUBTARGET_OVERRIDE_OPTIONS): Don't use SET_PROFILE_KERNEL.
        * config/rs6000/rs6000.c (SET_PROFILE_KERNEL): Don't define.

2010-03-16  Richard Henderson  <rth@redhat.com>

        PR middle-end/43365
        * tree-eh.c (replace_goto_queue): Also replace in the eh_seq.
        (lower_try_finally): Save and restore eh_seq around the expansion
        of the try-finally.

2010-03-16  Aldy Hernandez  <aldyh@redhat.com>

        * graphite-sese-to-poly.c (split_reduction_stmt): Skip debug
        statements before splitting block.

2010-03-16  Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

        * doc/sourcebuild.texi (Testsuites): Fix markup.
        Use pathnames relative to gcc/testsuite.
        (Test Directives): Move description of how timeout is determined.
        (Ada Tests): Favor gnat.exp over ada/acats/tests/gcc.
        (C Tests): Correct gcc.misc-tests directory.
        Framework tests now live in gcc.test-framework.

2010-03-16  Richard Guenther  <rguenther@suse.de>

        PR middle-end/43379
        * tree-cfg.c (gimple_merge_blocks): When propagating virtual PHI
        operands make sure to merge SSA_NAME_OCCURS_IN_ABNORMAL_PHI properly.

2010-03-16  Aldy Hernandez  <aldyh@redhat.com>
            Alexandre Oliva  <aoliva@redhat.com>

        PR tree-optimization/42917
        * lambda-code.c (remove_iv): Skip debug statements.
        (lambda_loopnest_to_gcc_loopnest): Likewise.
        (not_interesting_stmt): Debug statements are not interesting.

2010-03-16  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43051
        PR debug/43092
        * cselib.c (cselib_preserve_constants,
        cfa_base_preserved_val): New static variables.
        (preserve_only_constants): New function.
        (cselib_reset_table): If cfa_base_preserved_val is non-NULL, don't
        clear its REG_VALUES.  If cselib_preserve_constants, don't
        empty the whole hash table, but preserve there VALUEs with constants,
        cfa_base_preserved_val and cfa_base_preserved_val plus constant.
        (cselib_preserve_cfa_base_value): New function.
        (cselib_invalidate_regno): Don't invalidate cfa_base_preserved_val.
        (cselib_init): Change argument to int bitfield.  Set
        cselib_preserve_constants to whether CSELIB_PRESERVE_CONSTANTS
        is in it.
        (cselib_finish): Clear cselib_preserve_constants and
        cfa_base_preserved_val.
        * cselib.h (enum cselib_record_what): New enum.
        (cselib_init): Change argument to int.
        (cselib_preserve_cfa_base_value): New prototype.
        * postreload.c (reload_cse_regs_1): Adjust cselib_init caller.
        * dse.c (dse_step1): Likewise.
        * cfgcleanup.c (thread_jump): Likewise.
        * sched-deps.c (sched_analyze): Likewise.
        * gcse.c (local_cprop_pass): Likewise.
        * simplify-rtx.c (simplify_replace_fn_rtx): Add argument to callback.
        If FN is non-NULL, call the callback always and whenever it returns
        non-NULL just return that.  Only do rtx_equal_p if FN is NULL.
        * rtl.h (simplify_replace_fn_rtx): Add argument to callback.
        * combine.c (propagate_for_debug_subst): Add old_rtx argument,
        compare from with old_rtx and if it isn't rtx_equal_p, return NULL.
        * Makefile.in (var-tracking.o): Depend on $(RECOG_H).
        * var-tracking.c: Include recog.h.
        (bb_stack_adjust_offset): Remove.
        (vt_stack_adjustments): Don't call it, instead just gather the
        adjustments using insn_stack_adjust_offset_pre_post on each bb insn.
        (adjust_stack_reference): Remove.
        (compute_cfa_pointer): New function.
        (hard_frame_pointer_adjustment, cfa_base_rtx): New static variables.
        (struct adjust_mem_data): New type.
        (adjust_mems, adjust_mem_uses, adjust_mem_stores, adjust_insn): New
        functions.
        (get_address_mode): New function.
        (replace_expr_with_values): Use it.
        (use_type): Don't do cselib_lookup for VAR_LOC_UNKNOWN_P.
        Use get_address_mode.  For cfa_base_rtx return MO_CLOBBER.
        (adjust_sets): Remove.
        (add_uses): Don't add extra MO_VAL_USE for cfa_base_rtx plus constant.
        Use get_address_mode.
        (get_adjusted_src): Remove.
        (add_stores): Don't call it.  Never reuse expr SET.  Don't add extra
        MO_VAL_USE for cfa_base_rtx plus constant.  Use get_address_mode.
        (add_with_sets): Don't call adjust_sets.
        (fp_setter, vt_init_cfa_base): New functions.
        (vt_initialize): Change return type to bool.  Move most of pool etc.
        initialization to the beginning of the function from end.  Pass
        CSELIB_RECORD_MEMORY | CSELIB_PRESERVE_CONSTANTS to cselib_init.
        If !frame_pointer_needed, call vt_stack_adjustment before mos
        vector is filled, call vt_init_cfa_base if argp/framep has been
        eliminated to sp.  If frame_pointer_needed and argp/framep has
        been eliminated to hard frame pointer, set
        hard_frame_pointer_adjustment and call vt_init_cfa_base after
        encountering fp setter in the prologue.  For MO_ADJUST, call
        log_op_type before pusing the op into mos vector, not afterwards.
        Call adjust_insn before cselib_process_insn/add_with_sets,
        call cancel_changes (0) afterwards.
        (variable_tracking_main_1): Adjust for vt_initialize calling
        vt_stack_adjustments and returning whether it succeeded or not.

2010-03-15  Aldy Hernandez  <aldyh@redhat.com>

        * graphite-sese-to-poly.c (rewrite_cross_bb_scalar_deps): Skip
        debug statements.

2010-03-15  Jakub Jelinek  <jakub@redhat.com>

        * dwarf2out.c (dwarf2out_frame_debug): Don't assert drap_reg
        has been set.
        (based_loc_descr): Use DW_OP_fbreg for vdrap_reg even when
        drap_reg has not been set.

2010-03-15  Michael Matz  <matz@suse.de>

        PR middle-end/43300
        * tree-outof-ssa.c (emit_partition_copy): New argument sizeexp,
        use it to expand block copies.
        (insert_partition_copy_on_edge, insert_rtx_to_part_on_edge,
        insert_part_to_rtx_on_edge): Adjust callers of emit_partition_copy.
        (insert_value_copy_on_edge): Use store_expr for BLKmode values.

2010-03-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43367
        * tree-cfg.c (gimple_can_merge_blocks_p): Simplify PHI
        elimination check.

2010-03-15  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43317
        * ipa-struct-reorg.c (create_new_general_access): Update stmt.

2010-03-15  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43141
        * tree-sra.c (create_abstract_origin): New function.
        (modify_function): Call create_abstract_origin.

2010-03-15  Chris Demetriou  <cgd@google.com>

        * Makefile.in (stmp-int-hdrs): Don't chmod include/stdint.h if it
        wasn't copied.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43354
        * graphite-sese-to-poly.c (rewrite_close_phi_out_of_ssa): Do not
        call insert_out_of_ssa_copy for default definitions.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (my_long_long): Defined.
        (gcc_type_for_cloog_iv): Use it instead of long_long_integer_type_node.
        * graphite-sese-to-poly.c (my_long_long): Defined.
        (scop_ivs_can_be_represented): Use it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * doc/invoke.texi: Fix documentation of graphite-max-nb-scop-params,
        graphite-max-bbs-per-function, and loop-block-tile-size.
        * params.def (PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS): Replace "maximal"
        with "maximum".
        (PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION): Same.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (gcc_type_for_iv_of_clast_loop): Remove
        forward declaration.
        * graphite-sese-to-poly.c (reduction_phi_p): Remove FIXME comment.
        (add_upper_bounds_from_estimated_nit): New.
        (build_loop_iteration_domains): Use it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * doc/invoke.texi (PARAM_LOOP_BLOCK_TILE_SIZE): Document.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/43306
        * tree-chrec.c (evolution_function_right_is_integer_cst): CHREC_RIGHT
        should be an INTEGER_CST.  Also handle CASE_CONVERT.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite.c (graphite_initialize): To bound the number of bbs per
        function, use PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION.
        * params.def (PARAM_GRAPHITE_MAX_BBS_PER_FUNCTION): Declared.
        * doc/invoke.texi: Document it.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (build_poly_scop): Do not return bool.
        * graphite-sese-to-poly.h (build_poly_scop): Same.

2010-03-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (build_poly_scop): Limit scops following
        the number of parameters in the scop.  Use as an upper bound
        PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS.
        * params.def (PARAM_GRAPHITE_MAX_NB_SCOP_PARAMS): Declared.
        * doc/invoke.texi: Document it.

2010-03-13  Jerry Quinn  <jlquinn@optonline.net>

        * Makefile.in (TEXI_GCCINT_FILES): Remove c-tree.texi.
        * doc/c-tree.texi: Remove.
        * doc/generic.texi: Merge c-tree.texi here.
        * doc/gccint.texi (Trees): Remove menu entry.
        (c-tree.texi): Remove @include.
        * doc/rtl.texi (Reading RTL): Update pxref from Trees to GENERIC.
        * doc/languages.texi (Reading RTL): Ditto.

2010-03-12  Steve Ellcey  <sje@cup.hp.com>

        PR target/42869
        * config/ia64/sync.md (sync_compare_and_swap): Move memory fence.

2010-03-12  Michael Meissner  <meissner@linux.vnet.ibm.com>

        PR middle-end/42431
        * gcc/config/rs6000/rs6000.c (rs6000_emit_move): Delete band-aid
        code added to work around reload clobbering CONST insns.

2010-03-12  Jakub Jelinek  <jakub@redhat.com>

        * cselib.c (LONG_TERM_PRESERVED_VALUE_P): Remove.
        (cselib_preserve_definitely, cselib_clear_preserve): Remove.
        (cselib_preserve_only_values): Remove retain argument, don't
        traverse hash table with cselib_{preserve_definitely,clear_preserve}.
        * cselib.h (cselib_preserve_only_values): Remove retain argument.
        * var-tracking.c (micro_operation): Move insn field before union.
        Add DEF_VEC_O and DEF_VEC_ALLOC_O for this type.
        (struct variable_tracking_info_def): Remove n_mos field, change
        mos into a vector of micro_operations.
        (count_uses, count_uses_1, count_stores, count_with_sets): Remove.
        (bb_stack_adjust_offset, log_op_type, add_uses, add_stores,
        compute_bb_dataflow, emit_notes_in_bb): Adjust for VTI (bb)->mos
        changing into a vector.
        (add_with_sets): Likewise.  Ensure MO_VAL_USE uops from add_stores
        come before all other uops generated by add_stores.
        (vt_add_function_parameters): Adjust for cselib_preserve_only_values
        argument removal.
        (vt_initialize): Likewise.  Adjust for VTI (bb)->mos changing into
        a vector.  Run just one pass over the bbs instead of separate counting
        and computation phase.
        (vt_finalize): Free VTI (bb)->mos vector instead of array.

        PR debug/43329
        * tree-inline.c (remap_decls): Put old_var rather than origin_var
        into *nonlocalized_list vector.
        * dwarf2out.c (gen_formal_parameter_die): Call decl_ultimate_origin
        even if origin is non-NULL.
        (gen_variable_die): Likewise.
        (process_scope_var): Don't change origin.
        (gen_decl_die): Likewise.
        * tree-cfgcleanup.c (remove_forwarder_block): Check single_pred_p
        before adding new edges instead of after it, fix moving over
        debug stmts.

2010-03-11  David S. Miller  <davem@davemloft.net>

        * configure.ac (gcc_cv_as_cfi_advance_working): Skip a multiple
        of four.
        * configure: Rebuild.

2010-03-11  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43257
        * tree.c (assign_assembler_name_if_neeeded): New function.
        (free_lang_data_in_cgraph): Assembler name assignment moved to the
        above new function.
        * tree.h (assign_assembler_name_if_neeeded): Declare.
        * cgraphunit.c (cgraph_analyze_function): Create an assembler name for
        the function if needed.

2010-03-11  Chris Demetriou  <cgd@google.com>

        * Makefile.in (stmp-int-hdrs): Make include/unwind.h,
        include/stdint-gcc.h, and include/stdint.h world-readable.

2010-03-11  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43255
        * tree-vrp.c (process_assert_insertions_for): Do not insert
        asserts for trivial conditions.

2010-03-11  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>

        PR tree-optimization/43280
        * tree-ssa-math-opts.c (find_bswap_1): Modify symbolic number
        generation.  Move calculation of size out of the if branch.
        (find_bswap): Modify compare number generation.

2010-03-11  Richard Guenther  <rguenther@suse.de>

        PR lto/43200
        * lto-streamer-in.c (maybe_fixup_decls): Simplify.
        (input_gimple_stmt): Fixup handled component types during
        operand read.  Also fix up decls in ADDR_EXPRs.

2010-03-10  Eric Botcazou  <ebotcazou@adacore.com>

        * config/sparc/sol2-bi.h (CC1_SPEC): Default to -mcpu=v9 for -m32.
        * config/sparc/t-sol2-64 (MULTILIB_DIRNAMES): Use sparcv8plus.

2010-03-10  Jan Hubicka  <jh@suse.cz>

        PR c/43288
        * ipa.c (function_and_variable_visibility) Normalize COMMON bits.
        * varasm.c (get_variable_section): Don't do that here...
        (make_decl_rtl): ... and here.
        (do_assemble_alias): Produce decl RTL.
        (assemble_alias): Likewise.

2010-03-10  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43290
        * reg-notes.def (REG_CFA_SET_VDRAP): New note.
        * dwarf2out.c (dwarf2out_frame_debug_expr): Remove rule 20 - setting
        of fde->vdrap_reg.
        (dwarf2out_frame_debug): Handle REG_CFA_SET_VDRAP note.
        (based_loc_descr): Only express drap or vdrap regno based expressions
        using DW_OP_fbreg when not optimizing.
        * config/i386/i386.c (ix86_get_drap_rtx): When not optimizing,
        make the vDRAP = DRAP assignment RTX_FRAME_RELATED_P and add
        REG_CFA_SET_VDRAP note.

2010-03-10  Alexander Monakov  <amonakov@ispras.ru>

        PR tree-optimization/43236
        * tree-loop-distribution.c (generate_memset_zero): Fix off-by-one
        error in calculation of base address in reverse iteration case.
        (generate_builtin): Take number of latch executions if the statement
        is in the latch.

2010-03-10  Andrey Belevantsev  <abel@ispras.ru>

        PR middle-end/42859
        * tree-eh.c: Include pointer-set.h.
        (lower_eh_dispatch): Filter out duplicate case labels and
        remove the unneeded edge when the label is unused.  Return
        true when some edges are removed.
        (execute_lower_eh_dispatch): When any lowering resulted in
        removing an edge, also delete unreachable blocks.

2010-03-10  Jakub Jelinek  <jakub@redhat.com>

        PR bootstrap/43287
        * config/rs6000/rs6000.c (rs6000_delegitimize_address): Handle
        UNSPEC_MACHOPIC_OFFSET.

2010-03-09  Andreas Schwab  <schwab@linux-m68k.org>

        PR target/43294
        * config/m68k/m68k.c (TARGET_DELEGITIMIZE_ADDRESS): Define.
        (m68k_delegitimize_address): New function.

2010-03-09  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43299
        * dwarf2out.c (const_ok_for_output_1): Return 1 for UNSPECs.

        PR debug/43299
        * var-tracking.c (adjust_sets): New function.
        (count_with_sets, add_with_sets): Use it.
        (get_adjusted_src): New inline function.
        (add_stores): Use it.

        PR debug/43304
        * var-tracking.c (vt_expand_loc_callback) <case SUBREG>: If dummy,
        call cselib_dummy_expand_value_rtx_cb instead of
        cselib_expand_value_rtx_cb.

        PR debug/43293
        * config/i386/t-i386 (i386.o): Depend on debug.h and dwarf2out.h.
        * config/i386/i386.c: Include debug.h and dwarf2out.h.
        (ix86_file_end): If dwarf2out_do_cfi_asm (), emit .cfi_startproc
        and .cfi_endproc around the pic thunks.
        (output_set_got): For TARGET_DEEP_BRANCH_PREDICTION pic, ensure
        all queued unwind info register saves are saved before the call.
        For !TARGET_DEEP_BRANCH_PREDICTION pic, ensure the call is
        considered as sp-=4 for unwind info and the pop as sp+=4 which
        also clobbers dest, but doesn't actually restore it.

        PR debug/43290
        * config/i386/i386.c (ix86_get_drap_rtx): Don't set
        RTX_FRAME_RELATED_P.

2010-03-09  Jie Zhang  <jie@codesourcery.com>

        * config/arm/arm.md (thumb_mulsi3_v6): Remove trailing
        whitespaces in output template.

2010-03-09  Jie Zhang  <jie@codesourcery.com>

        * ira-lives.c (check_and_make_def_use_conflict): Don't fall
        out array boundary.

2010-03-08  Jakub Jelinek  <jakub@redhat.com>

        * Makefile.in (check_gcc_parallelize): Run dg-torture.exp and
        builtins.exp in a separate job.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Use
        lower_bound_in_type and upper_bound_in_type.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Use sizetype
        instead of unsigned_type_node.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>
            Reza Yazdani  <reza.yazdani@amd.com>

        PR middle-end/43065
        * graphite-sese-to-poly.c (add_param_constraints): Insert bounds
        on pointer type parameters.

2010-03-08  Tobias Grosser  <grosser@fim.uni-passau.de>

        PR middle-end/42644
        PR middle-end/42130
        * graphite-clast-to-gimple.c (clast_to_gcc_expression): Also
        handle conversions from pointer to integers.
        (gcc_type_for_cloog_iv): Choose the smalles signed integer as an
        induction variable, to be able to work with code generated by CLooG.
        * graphite-sese-to-poly.c (scop_ivs_can_be_represented): New.
        (build_poly_scop): Bail out if we cannot codegen a loop.

2010-03-08  Tobias Grosser  <grosser@fim.uni-passau.de>

        * graphite-clast-to-gimple.c (translate_clast): Do not short-cut
        code generation with gloog_error.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * sese.c (expand_scalar_variables_ssa_name): Add new argument for type.
        Call fold_convert on all the returned values.
        (expand_scalar_variables_expr): Pass to
        expand_scalar_variables_ssa_name the type of the resulting expression.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-ppl.c (ppl_min_for_le_polyhedron): Renamed
        ppl_min_for_le_pointset.
        Use ppl_Pointset_Powerset_C_Polyhedron_minimize.
        * graphite-ppl.h (ppl_min_for_le_polyhedron): Update declaration.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-dependences.c (map_into_dep_poly): Removed.
        (dependence_polyhedron_1): Use combine_context_id_scat.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-poly.h (struct poly_scattering): Add layout documentation.
        (struct poly_bb): Same.
        (combine_context_id_scat): New.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/42326
        * sese.c (name_defined_in_loop_p): Return false for default
        definitions.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-clast-to-gimple.c (find_cloog_iv_in_expr): Simplify
        and clean up the logic.

2010-03-08  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite-sese-to-poly.c (add_param_constraints): Enabled: remove
        early return.

2010-03-08  Jakub Jelinek  <jakub@redhat.com>

        * var-tracking.c (remove_cselib_value_chains): Define only for
        ENABLE_CHECKING.
        (dataflow_set_preserve_mem_locs, dataflow_set_remove_mem_locs,
        delete_slot_part, emit_notes_for_differences_1): Don't call
        remove_cselib_value_chains here.
        (set_slot_part, emit_notes_for_differences_2): Don't call
        add_cselib_value_chains here.
        (preserved_values): New vector.
        (preserve_value): New function.
        (add_uses, add_stores, vt_add_function_parameters): Use it
        instead of cselib_preserve_value.
        (changed_values_stack): New vector.
        (check_changed_vars_0): New function.
        (check_changed_vars_1, check_changed_vars_2): Use it.
        (emit_notes_for_changes): Call set_dv_changed (*, false) on all
        changed_values_stack VALUEs.
        (vt_emit_notes): For all preserved_values call
        add_cselib_value_chains.  If ENABLE_CHECKING call
        remove_cselib_value_chains before verifying value_chains is empty.
        Initialize and free changed_values_stack.
        (vt_initialize): Initialize preserved_values.
        (vt_finalize): Free preserved_values.

2010-03-08  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/43269
        * tree-ssa-dse.c (dse_possible_dead_store_p): Fix post-dom
        region detection.

2010-03-08  Martin Jambor  <mjambor@suse.cz>

        * ipa-prop.h (struct ipa_param_descriptor): Removed the called field.
        (ipa_is_param_called): Removed.
        * ipa-prop.c (ipa_note_param_call): Do not set the called flag.
        (ipa_print_node_params): Do not print the called flag.
        (ipa_write_node_info): Do not stream the called flag.
        (ipa_read_node_info): Likewise.

2010-03-07  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43176
        * Makefile.in (var-tracking.o): Depend on pointer-set.h.
        * cselib.c (struct expand_value_data): Add dummy field.
        (cselib_expand_value_rtx, cselib_expand_value_rtx_cb): Initialize
        dummy to false.
        (cselib_dummy_expand_value_rtx_cb): New function.
        (cselib_expand_value_rtx_1): If evd->dummy is true, don't allocate
        any rtl.
        * cselib.h (cselib_dummy_expand_value_rtx_cb): New prototype.
        * var-tracking.c: Include pointer-set.h.
        (variable): Change n_var_parts to char from int.  Add
        cur_loc_changed and in_changed_variables fields.
        (variable_canonicalize): Remove.
        (shared_var_p): New inline function.
        (unshare_variable): Maintain cur_loc_changed and
        in_changed_variables fields.  If var was in changed_variables,
        replace it there with new_var.  Just copy cur_loc instead of
        resetting it to something else.
        (variable_union): Don't recompute cur_loc.  Use shared_var_p.
        (dataflow_set_union): Don't call variable_canonicalize.
        (loc_cmp): If both x and y are DEBUG_EXPRs, compare uids
        of their DEBUG_EXPR_TREE_DECLs.
        (canonicalize_loc_order_check): Verify that cur_loc is NULL
        and in_changed_variables and cur_loc_changed is false.
        (variable_merge_over_cur): Clear cur_loc, in_changed_variables
        and cur_loc_changed.  Don't update cur_loc here.
        (variable_merge_over_src): Don't call variable_canonicalize.
        (dataflow_set_preserve_mem_locs): Use shared_var_p.  When
        removing loc that is equal to cur_loc, clear cur_loc,
        set cur_loc_changed and ensure variable_was_changed is called.
        (dataflow_set_remove_mem_locs): Use shared_var_p.  Only
        compare pointers in cur_loc check, if it is equal to loc,
        clear cur_loc and set cur_loc_changed.  Don't recompute cur_loc here.
        (variable_different_p): Remove compare_current_location argument,
        don't compare cur_loc.
        (dataflow_set_different_1): Adjust variable_different_p caller.
        (variable_was_changed): If dv had some var in changed_variables
        already, reset in_changed_variables flag for it and propagate
        cur_loc_changed over to the new variable.  On empty var
        always set cur_loc_changed.  Set in_changed_variables on whatever
        var is added to changed_variables.
        (set_slot_part): Clear cur_loc_changed and in_changed_variables.
        Use shared_var_p.  When removing loc that is equal to cur_loc,
        clear cur_loc and set cur_loc_changed.  If cur_loc is NULL at the
        end, don't set it to something else, just call variable_was_changed.
        (delete_slot_part): Use shared_var_p.  When cur_loc equals to
        loc being removed, clear cur_loc and set cur_loc_changed.
        Set cur_loc_changed if all locations have been removed.
        (struct expand_loc_callback_data): New type.
        (vt_expand_loc_callback): Add dummy mode in which no rtxes are
        allocated.  Always create SUBREGs if simplify_subreg failed.
        Prefer to use cur_loc, when that fails and still in
        changed_variables (and seen first time) recompute it.  Set
        cur_loc_changed of variables which had to change cur_loc and
        compute elcd->cur_loc_changed if any of the subexpressions used
        had to change cur_loc.
        (vt_expand_loc): Adjust to pass arguments in
        expand_loc_callback_data structure.
        (vt_expand_loc_dummy): New function.
        (emitted_notes): New variable.
        (emit_note_insn_var_location): For VALUEs and DEBUG_EXPR_DECLs
        that weren't used for any other decl in current
        emit_notes_for_changes call call vt_expand_loc_dummy to update
        cur_loc.  For -fno-var-tracking-assignments, set cur_loc to
        first loc_chain location if NULL before.  Always use just
        cur_loc instead of first loc_chain location.  When cur_loc_changed
        is false, when not --enable-checking=rtl just don't emit any note.
        When rtl checking, compute the note and assert it is the same
        as previous note.  Clear cur_loc_changed and in_changed_variables
        at the end before removing from changed_variables.
        (check_changed_vars_3): New function.
        (emit_notes_for_changes): Traverse changed_vars to call
        check_changed_vars_3 on each changed var.
        (emit_notes_for_differences_1): Clear cur_loc_changed and
        in_changed_variables.  Recompute cur_loc of new_var.
        (emit_notes_for_differences_2): Clear cur_loc if new variable appears.
        (vt_emit_notes): Initialize and destroy emitted_notes.

2010-03-07  Bernd Schmidt  <bernd.schmidt@analog.com>

        PR rtl-optimization/42220
        * regrename.c (scan_rtx) <case STRICT_LOW_PART, ZERO_EXTRACT>:
        Use verify_reg_tracked to determine if we should use OP_OUT rather
        than OP_INOUT.
        (build_def_use): If we see an in-out operand for a register that we
        know nothing about, treat is an output if possible, fail the block if
        not.

2010-03-06  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42897
        * gimple-iterator.c (gsi_remove): Propagate only PHI DEFs removed
        permanently.

2010-03-06  Alexandre Oliva  <aoliva@redhat.com>

        PR debug/42897
        * tree-vect-loop.c (vect_transform_loop): Kill out-of-loop debug
        uses of relevant DEFs that are dead outside the loop too.

2010-03-06  Alexandre Oliva <aoliva@redhat.com>

        * var-tracking.c (dataflow_set_merge): Swap src and src2.
        Reverted:
        2010-01-13  Jakub Jelinek  <jakub@redhat.com>
        PR debug/41371
        * var-tracking.c (values_to_unmark): New variable.
        (find_loc_in_1pdv): Clear VALUE_RECURSED_INTO of values in
        values_to_unmark vector.  Moved body to...
        (find_loc_in_1pdv_1): ... this.  Don't clear VALUE_RECURSED_INTO,
        instead queue it into values_to_unmark vector.
        (vt_find_locations): Free values_to_unmark vector.

2010-03-05  Eric Botcazou  <ebotcazou@adacore.com>

        * Makefile.in (PLUGINCC, PLUGINCFLAGS): New variables.
        (site.exp): Export them when plugins are enabled.

2010-03-05  Sebastian Pop  <sebastian.pop@amd.com>

        PR middle-end/42326
        * tree-chrec.c (chrec_fold_plus_1): Do not handle convert expressions
        that contain scevs.
        (chrec_fold_multiply): Same.

2010-03-04  Andrew Pinski  <andrew_pinski@caviumnetworks.com>

        PR c/43248
        * c-decl.c (build_compound_literal): Return early if init is
        an error_mark_node.

2010-03-04  Martin Jambor  <mjambor@suse.cz>

        PR tree-optimization/43164
        PR tree-optimization/43191
        * tree-sra.c (type_consists_of_records_p): Reject records with
        zero-size bit-fields at the end.

2010-03-04  Mike Stump  <mikestump@comcast.net>

        * Makefile.in (TAGS): Remove *.y.

2010-03-04  Richard Guenther  <rguenther@suse.de>

        PR tree-optimization/40761
        * tree-ssa-pre.c (compute_antic): Walk reverse postorder
        in reverse order.
        (my_rev_post_order_compute): New function.
        (init_pre): Call it.

2010-03-04  Changpeng Fang  <changpeng.fang@amd.com>

        PR middle-end/43209
        * tree-ssa-loop-ivopts.c (determine_use_iv_cost_condition): Do not
        decrease the cost of an IV candidate when the cost is infinite.

2010-03-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

        * doc/extend.texi (Vector Extensions, X86 Built-in Functions):
        Use '3DNow!' for the extension of that name, ensure normal space
        after the string.
        * doc/invoke.texi (i386 and x86-64 Options): Likewise.

2010-03-03  Jeff Law  <law@redhat.com>

        * PR middle-end/32693
        * expmed.c (store_bit_field_1): Use gen_lowpart_SUBREG rather
        than gen_rtx_SUBREG.
        (extract_bit_field_1): Likewise.

2010-03-03  Janis Johnson  <janis187@us.ibm.com>

        * doc/sourcebuild.texi (Test directives): Document that arguments
        include-opts and exclude-opts are now optional for dg-skip-if,
        dg-xfail-if, dg-xfail-run-if, and dg-shouldfail.

2010-03-03  Jason Merrill  <jason@redhat.com>

        PR c++/12909
        * cgraph.h (varpool_node): Add extra_name field.
        * varpool.c (varpool_extra_name_alias): New.
        (varpool_assemble_decl): Emit extra name aliases.
        (varpool_mark_needed_node): Look past an extra name alias.
        * lto-streamer.h (LTO_tags): Add LTO_var_decl_alias.
        * lto-streamer-in.c (lto_input_tree): Read it.
        * lto-streamer-out.c (output_unreferenced_globals): Write it.

2010-03-03  Eric Botcazou  <ebotcazou@adacore.com>

        * config.gcc (sparc64-*-solaris2*, sparc-*-solaris2*): Merge into...
        (sparc*-*-solaris2*): ...this.

2010-03-03  Jakub Jelinek  <jakub@redhat.com>

        PR debug/43229
        * cfgexpand.c (expand_debug_expr): Handle DOT_PROD_EXPR,
        WIDEN_MULT_EXPR and WIDEN_SUM_EXPR.  Return NULL without
        ICE for vector expressions, ADDR_SPACE_CONVERT_EXPR,
        FIXED_CONVERT_EXPR, OBJ_TYPE_REF and WITH_SIZE_EXPR.

        PR debug/43237
        * dwarf2out.c (add_bound_info): If a decl bound doesn't have decl_die,
        fallthrough to default handling, just with want_address 0 instead of 2.
        For single element lists, add_AT_loc directly, otherwise create an
        artificial variable DIE and stick location list to it.

        PR debug/43177
        * var-tracking.c (loc_cmp): Don't assert VALUEs have the same mode.
        (VAL_EXPR_HAS_REVERSE): Define.
        (reverse_op): New function.
        (add_stores): For reversible operations add an extra MO_VAL_USE.

2010-03-02  Jason Merrill  <jason@redhat.com>

        * c-pretty-print.c (pp_c_specifier_qualifier_list): Print vector size.

2010-03-02  Eric Botcazou  <ebotcazou@adacore.com>

        * config.gcc (sparc-*-linux*): Do not include sparc/gas.h.
        (sparc64-*-linux*): Likewise.
        (sparc64-*-solaris2*): Include assembler files before linker ones.
        (sparc-*-solaris2*): Simplify and reorder to match previous case.
        * config/sparc/gas.h: Delete.
        * config/sparc/sol2-64.h: Add copyright notice.
        * config/sparc/sol2-gas-bi.h: Likewise.
        * config/sparc/sol2-gld.h: Likewise.
        * config/sparc/sysv4.h (TARGET_ASM_NAMED_SECTION): Delete.
        * config/sparc/sol2.h (TARGET_ASM_NAMED_SECTION): Redefine.
        * config/sparc/sol2-gas.h (TARGET_ASM_NAMED_SECTION): Likewise.
        * config/sparc/sparc.c (TARGET_ASM_ALIGNED_SI_OP): Never redefine.
        (sparc_elf_asm_named_section): Rename into...
        (sparc_solaris_elf_asm_named_section): ...this.  Always define.

2010-03-02  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (override_options): Fix -mtune error message.

2010-03-02  Jeff Law  <law@redhat.com>

        PR middle-end/42431
        * reload1.c (rtx_p, substitute_stack): Declare.
        (substitute): Record addresses of changed rtxs.
        (gen_reload_chain_without_interm_reg_p): Don't use copy_rtx anymore.
        Restore the original rtx when complete.
        (reload): Free subsitute_stack when complete.

2010-03-02  Janis Johnson  <janis187@us.ibm.com>

        * doc/gccint.texi (menu): Add Testsuites as a chapter.
        * doc/sourcebuild.texi (Testsuites): Move up a level to be a
        new chapter.
        (Test Idioms, Test Directives, Ada Tests, C Tests, libgcj Tests,
        LTO Testing, gcov Testing, profopt Testing, compat Testing,
        Torture Tests): Change from subsection to section.

2010-03-02  Jakub Jelinek  <jakub@redhat.com>
            Steven Bosscher  <steven@gcc.gnu.org>

        * var-tracking.c (vt_initialize): Scan insns in ebb chunks
        instead of b