OSDN Git Service

2012-03-02 Jack Howarth <howarth@bromo.med.uc.edu>
[pf3gnuchains/gcc-fork.git] / boehm-gc / configure.ac
1 # Copyright (c) 1999, 2000, 2001, 2002, 2003, 2006, 2010, 2011 by Red Hat, Inc.
2 # All rights reserved.
3 # Copyright 2004 Nathanael Nerode
4
5 # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
6 # OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
7
8 # Permission is hereby granted to use or copy this program
9 # for any purpose,  provided the above notices are retained on all copies.
10 # Permission to modify the code and to distribute modified code is granted,
11 # provided the above notices are retained, and a notice that the code was
12 # modified is included with the above copyright notice.
13 #
14 # Original author: Tom Tromey
15 # Modified by Nathanael Nerode
16
17 dnl Process this file with autoconf to produce configure.
18
19 AC_PREREQ(2.64)
20 AC_INIT
21 AC_CONFIG_SRCDIR(gcj_mlc.c)
22 # This works around the fact that libtool configuration may change LD
23 # for this particular configuration, but some shells, instead of
24 # keeping the changes in LD private, export them just because LD is
25 # exported.
26 ORIGINAL_LD_FOR_MULTILIBS=$LD
27
28 AM_ENABLE_MULTILIB(, ..)
29
30 AC_CANONICAL_HOST
31 AC_CANONICAL_TARGET
32
33 # Get the 'noncanonical' system names.
34 ACX_NONCANONICAL_TARGET
35
36 # This works around an automake problem.
37 mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
38 AC_SUBST(mkinstalldirs)
39
40 AM_INIT_AUTOMAKE(gc, 6.6, no-define)
41
42 # The autoconf 2.5x version of the no-executables hack.
43 GCC_NO_EXECUTABLES
44
45 # Yak.  We must force CC and CXX to /not/ be precious variables; otherwise
46 # the wrong, non-multilib-adjusted value will be used in multilibs.
47 # As a side effect, we have to subst CFLAGS and CXXFLAGS ourselves.
48
49 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
50 m4_define([_AC_ARG_VAR_PRECIOUS],[])
51 AC_PROG_CC
52 AC_PROG_CXX
53 m4_rename_force([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
54
55 AM_PROG_CC_C_O
56
57 AC_SUBST(CFLAGS)
58 AC_SUBST(CXXFLAGS)
59
60 # Newer automakes demand CCAS and CCASFLAGS.
61 : ${CCAS='$(CC)'}
62 : ${CCASFLAGS='$(CFLAGS)'}
63 AC_SUBST(CCAS)
64 AC_SUBST(CCASFLAGS)
65
66 AC_CHECK_TOOL(AS, as)
67 AC_CHECK_TOOL(AR, ar)
68 AC_CHECK_TOOL(RANLIB, ranlib, :)
69
70 AC_PROG_INSTALL
71
72 AM_MAINTAINER_MODE
73
74 . ${srcdir}/configure.host
75
76 case ${gc_basedir} in
77 /* | [A-Za-z]:[/\\]*) gc_flagbasedir=${gc_basedir} ;;
78 *) gc_flagbasedir='$(top_builddir)/'${gc_basedir} ;;
79 esac
80
81 gc_cflags="${gc_cflags} -Iinclude -I"'$(top_builddir)'"/./targ-include -I${gc_flagbasedir}/libc/include"
82 case "${host}" in
83   *-*-cygwin32*)
84     gc_cflags="${gc_cflags} -I${gc_flagbasedir}/../winsup/include"
85     ;;
86 esac
87
88 dnl Add for mingw targets GC_BUILD option
89 case "${host}" in
90   *-*-mingw*)
91     gc_cflags="${gc_cflags} -DGC_BUILD=1"
92     ;;
93 esac
94
95 dnl gc_cflags="${gc_cflags} -fno-builtin"
96
97 GC_CFLAGS=${gc_cflags}
98 AC_SUBST(GC_CFLAGS)
99
100 AC_PROG_LIBTOOL
101
102 dnl We use these options to decide which functions to include.
103 AC_ARG_WITH(target-subdir,
104 [  --with-target-subdir=SUBDIR
105                           configuring with a cross compiler])
106 AC_ARG_WITH(cross-host,
107 [  --with-cross-host=HOST  configuring with a cross compiler])
108
109 AC_MSG_CHECKING([for thread model used by GCC])
110 THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
111 if test -z "$THREADS"; then
112    THREADS=no
113 fi
114 AC_MSG_RESULT([$THREADS])
115
116 AC_ARG_ENABLE(parallel-mark,
117 [  --enable-parallel-mark       parallelize marking and free list construction],
118    [case "$THREADS" in
119       no | none | single)
120         AC_MSG_ERROR([Parallel mark requires --enable-threads=x spec])
121         ;;
122     esac]
123 )
124
125 AM_CPPFLAGS="-I`cd $srcdir && ${PWDCMD-pwd}`/include"
126 THREADLIBS=
127 case "$THREADS" in
128  no | none | single)
129     THREADS=none
130     ;;
131  posix | posix95 | pthreads)
132     THREADS=posix
133     THREADLIBS=-lpthread
134     case "$host" in
135      x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* | alpha-*-linux*)
136         AC_DEFINE(GC_LINUX_THREADS,1,[support for Xavier Leroy's Linux threads])
137         AC_DEFINE(_REENTRANT,1,[Use reentrant code])
138         if test "${enable_parallel_mark}" = yes; then
139           AC_DEFINE(PARALLEL_MARK,1,[allow the marker to run in multiple threads])
140         fi
141         AC_DEFINE(THREAD_LOCAL_ALLOC,1,[define GC_local_malloc() & GC_local_malloc_atomic()])
142         ;;
143      *-*-linux*)
144         AC_DEFINE(GC_LINUX_THREADS,1)
145         AC_DEFINE(_REENTRANT,1)
146         ;;
147      *-*-aix*)
148         AC_DEFINE(GC_AIX_THREADS,1,[support AIX threads])
149         AC_DEFINE(_REENTRANT,1)
150         ;;
151      *-*-hpux11*)
152         AC_MSG_WARN("Only HP-UX 11 POSIX threads are supported.")
153         AC_DEFINE(GC_HPUX_THREADS,1,[enables support for HP/UX 11 pthreads])
154         AC_DEFINE(_POSIX_C_SOURCE,199506L,[POSIX version of C Source])
155         if test "${enable_parallel_mark}" = yes; then
156           AC_DEFINE(PARALLEL_MARK,1)
157         fi
158         AC_DEFINE(THREAD_LOCAL_ALLOC,1)
159         THREADLIBS="-lpthread -lrt"
160         # HPUX needs REENTRANT for the _r calls.
161         AC_DEFINE(_REENTRANT, 1, [Required define if using POSIX threads])
162         ;;
163      *-*-hpux10*)
164         AC_MSG_WARN("Only HP-UX 11 POSIX threads are supported.")
165         ;;
166       *-*-kfreebsd*-gnu)
167        AC_DEFINE(GC_FREEBSD_THREADS)
168        INCLUDES="$INCLUDES -pthread"
169        THREADDLLIBS=-pthread
170        AC_DEFINE(_REENTRANT)
171          if test "${enable_parallel_mark}" = yes; then
172          AC_DEFINE(PARALLEL_MARK)
173        fi
174        AC_DEFINE(THREAD_LOCAL_ALLOC)
175        AC_DEFINE(USE_COMPILER_TLS, 1,[use tls for boehm])
176                ;;
177      *-*-freebsd*)
178         AC_MSG_WARN("FreeBSD does not yet fully support threads with Boehm GC.")
179         AC_DEFINE(GC_FREEBSD_THREADS,1,[support FreeBSD threads])
180         AM_CPPFLAGS="$AM_CPPFLAGS -pthread"
181         THREADLIBS=-pthread
182         ;;
183      *-*-solaris2.8*)
184         AC_DEFINE(GC_SOLARIS_PTHREADS,1,[support for Solaris pthreads])
185         # Need to use alternate thread library, otherwise gctest hangs
186         # on Solaris 8.
187         multi_os_directory=`$CC -print-multi-os-directory`
188         THREADLIBS="-L/usr/lib/lwp/$multi_os_directory \
189                     -R/usr/lib/lwp/$multi_os_directory -lpthread -lthread -lrt"
190         ;;
191      *-*-solaris2*)
192         AC_DEFINE(GC_SOLARIS_PTHREADS,1,[support for Solaris pthreads])
193         # The alternate thread library was only introduced in Solaris 8 and
194         # became the default in Solaris 9, so no need for the special code
195         # above otherwise.
196         # nanosleep, sched_yield, and sem_* only live in librt before
197         # Solaris 11.
198         THREADLIBS="-lpthread -lrt"
199         ;;
200      *-*-irix*)
201         AC_DEFINE(GC_IRIX_THREADS,1,[support for Irix pthreads])
202         ;;
203      *-*-cygwin*)
204         AC_DEFINE(GC_WIN32_THREADS,1,[support for win32 threads])
205         ;;
206      *-*-darwin*)
207         AC_DEFINE(GC_DARWIN_THREADS,1,[support for Mac OS X pthreads])
208         AC_DEFINE(THREAD_LOCAL_ALLOC,1)
209         if test "${enable_parallel_mark}" = yes; then
210           AC_DEFINE(PARALLEL_MARK,1)
211         fi
212         ;;
213      *-*-osf*)
214         AC_DEFINE(GC_OSF1_THREADS,1,[support for Tru64 pthreads])
215         if test "${enable_parallel_mark}" = yes; then
216           AC_DEFINE(PARALLEL_MARK,1)
217           AC_DEFINE(THREAD_LOCAL_ALLOC,1)
218           # May want to enable it in other cases, too.
219           # Measurements havent yet been done.
220         fi
221         AM_CPPFLAGS="$AM_CPPFLAGS -pthread"
222         THREADLIBS="-lpthread -lrt"
223         ;;
224     esac
225     ;;
226  win32)
227     AC_DEFINE(GC_WIN32_THREADS,1)
228     dnl Old wine getenv may not return NULL for missing entry.
229     dnl Define EMPTY_GETENV_RESULTS here to work around the bug.
230     ;;
231  dgux386)
232     THREADS=dgux386
233 AC_MSG_RESULT($THREADLIBS)
234     # Use pthread GCC  switch
235     THREADLIBS=-pthread
236     if test "${enable_parallel_mark}" = yes; then
237         AC_DEFINE(PARALLEL_MARK,1)
238     fi
239     AC_DEFINE(THREAD_LOCAL_ALLOC,1)
240     AC_DEFINE(GC_DGUX386_THREADS,1,[support for DB/UX on I386 threads])
241     AC_DEFINE(DGUX_THREADS,1,[No description])
242     # Enable _POSIX4A_DRAFT10_SOURCE with flag -pthread
243     AM_CPPFLAGS="-pthread $AM_CPPFLAGS"
244     ;;
245  aix)
246     THREADS=posix
247     THREADLIBS=-lpthread
248     AC_DEFINE(GC_AIX_THREADS,1)
249     AC_DEFINE(_REENTRANT,1)
250     ;;
251  decosf1 | irix | mach | os2 | solaris | dce | vxworks)
252     AC_MSG_ERROR(thread package $THREADS not yet supported)
253     ;;
254  *)
255     AC_MSG_ERROR($THREADS is an unknown thread package)
256     ;;
257 esac
258 AC_SUBST(THREADLIBS)
259
260 case "$host" in
261    powerpc-*-darwin*)
262       powerpc_darwin=true
263       ;;
264 esac
265 AM_CONDITIONAL(POWERPC_DARWIN,test x$powerpc_darwin = xtrue)
266
267 # Darwin needs a few extra special tests to deal with variation in the
268 # system headers.
269 case "$host" in
270   powerpc*-*-darwin*)
271     AC_CHECK_MEMBER(ppc_thread_state_t.r0,
272       AC_DEFINE(HAS_PPC_THREAD_STATE_R0,1,
273         [ppc_thread_state_t has field r0]),,
274       [#include <mach/thread_status.h>])
275     AC_CHECK_MEMBER(ppc_thread_state_t.__r0,
276       AC_DEFINE(HAS_PPC_THREAD_STATE___R0,1,dnl
277         [ppc_thread_state_t has field __r0]),,
278       [#include <mach/thread_status.h>])
279     AC_CHECK_MEMBER(ppc_thread_state64_t.r0,
280       AC_DEFINE(HAS_PPC_THREAD_STATE64_R0,1,dnl
281         [ppc_thread_state64_t has field r0]),,
282       [#include <mach/thread_status.h>])
283     AC_CHECK_MEMBER(ppc_thread_state64_t.__r0,
284       AC_DEFINE(HAS_PPC_THREAD_STATE64___R0,1,dnl
285         [ppc_thread_state64_t has field __r0]),,
286       [#include <mach/thread_status.h>])
287     ;;
288   i?86*-*-darwin*)
289     AC_CHECK_MEMBER(x86_thread_state32_t.eax,
290       AC_DEFINE(HAS_X86_THREAD_STATE32_EAX,1,dnl
291         [x86_thread_state32_t has field eax]),,
292       [#include <sys/cdefs.h>
293       #include <mach/thread_status.h>])
294     AC_CHECK_MEMBER(x86_thread_state32_t.__eax,
295       AC_DEFINE(HAS_X86_THREAD_STATE32___EAX,1,dnl
296         [x86_thread_state32_t has field __eax]),,
297       [#include <sys/cdefs.h>
298       #include <mach/thread_status.h>])
299     ;;
300   x86_64-*-darwin*)
301     AC_CHECK_MEMBER(x86_thread_state64_t.rax,
302       AC_DEFINE(HAS_X86_THREAD_STATE64_RAX,1,dnl
303         [x86_thread_state64_t has field rax]),,
304       [#include <sys/cdefs.h>
305       #include <mach/thread_status.h>])
306     AC_CHECK_MEMBER(x86_thread_state64_t.__rax,
307       AC_DEFINE(HAS_X86_THREAD_STATE64___RAX,1,dnl
308         [x86_thread_state64_t has field __rax]),,
309       [#include <sys/cdefs.h>
310       #include <mach/thread_status.h>])
311      ;;
312   *) ;;
313 esac
314
315 case "$host" in
316   # While IRIX 6 has libdl for the O32 and N32 ABIs, it's missing for N64
317   # and unnecessary everywhere.
318   mips-sgi-irix6*) ;;
319   # We never want libdl on darwin. It is a fake libdl that just ends up making
320   # dyld calls anyway
321   *-*-darwin*) ;;
322   *)
323     AC_CHECK_LIB(dl, dlopen, EXTRA_TEST_LIBS="$EXTRA_TEST_LIBS -ldl")
324     ;;
325 esac
326
327 # extra LD Flags which are required for targets
328 case "${host}" in
329   *-*-darwin*)
330     extra_ldflags_libgc=-Wl,-single_module
331     ;;
332 esac
333 AC_SUBST(extra_ldflags_libgc)
334
335 AC_SUBST(EXTRA_TEST_LIBS)
336
337 target_all=libgcjgc.la
338 AC_SUBST(target_all)
339
340 dnl If the target is an eCos system, use the appropriate eCos
341 dnl I/O routines.
342 dnl FIXME: this should not be a local option but a global target
343 dnl system; at present there is no eCos target.
344 TARGET_ECOS="no"
345 AC_ARG_WITH(ecos,
346 [  --with-ecos             enable runtime eCos target support],
347 TARGET_ECOS="$with_ecos"
348 )
349
350 addobjs=
351 addlibs=
352 addincludes=
353 addtests=
354 case "$TARGET_ECOS" in
355    no)
356       ;;
357    *)
358       AC_DEFINE(ECOS,1,[Target is ECOS])
359       AM_CPPFLAGS="${AM_CPPFLAGS} -I${TARGET_ECOS}/include"
360       addobjs="$addobjs ecos.lo"
361       ;;
362 esac
363
364 if test "${enable_cplusplus}" = yes; then
365       addincludes="$addincludes include/gc_cpp.h include/gc_allocator.h"
366       addtests="$addtests test_cpp"
367 fi
368
369 AM_CONDITIONAL(CPLUSPLUS, test "${enable_cplusplus}" = yes)
370
371 AC_SUBST(CXX)
372
373 AC_SUBST(AM_CPPFLAGS)
374
375 # Configuration of shared libraries
376 #
377 AC_MSG_CHECKING(whether to build shared libraries)
378 AC_ENABLE_SHARED
379
380 case "$host" in
381  alpha-*-openbsd*)
382      enable_shared=no
383      AC_MSG_RESULT(no)
384      ;;
385  *)
386      AC_MSG_RESULT(yes)
387      ;;
388 esac
389
390 # Checks for pthreads functions
391 #
392 oldLIBS="$LIBS"
393 LIBS="$LIBS $THREADLIBS"
394 AC_CHECK_FUNCS([pthread_getattr_np])
395 AC_CHECK_FUNCS([pthread_get_stackaddr_np])
396 LIBS="$oldLIBS"
397
398 # Configuration of machine-dependent code
399 #
400 # Set NO_EXECUTE_PERMISSION by default because gcj already uses
401 # ffi_closure_{alloc,free} which takes care of allocating trampolines
402 # in executable memory.
403 #
404 AC_MSG_CHECKING(which machine-dependent code should be used)
405 machdep=
406 case "$host" in
407  alpha*-*-openbsd*)
408     machdep="alpha_mach_dep.lo"
409     if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
410        AC_MSG_WARN(OpenBSD/Alpha without dlopen(). Shared library support is disabled)
411     fi
412     ;;
413  alpha*-*-linux*)
414     machdep="alpha_mach_dep.lo"
415     ;;
416  i?86-*-solaris2.[[89]] | i?86-*-solaris2.1?)
417     AC_DEFINE(SOLARIS25_PROC_VDB_BUG_FIXED,1,[PROC_VDB in Solaris 2.5 gives wrong values for dirty bits])
418     ;;
419  mipstx39-*-elf*)
420     machdep="mips_ultrix_mach_dep.lo"
421     AC_DEFINE(STACKBASE, __stackbase,[No description])
422     AC_DEFINE(DATASTART_IS_ETEXT,1,[No description])
423     ;;
424  mips-dec-ultrix*)
425     machdep="mips_ultrix_mach-dep.lo"
426     ;;
427  mips-nec-sysv*|mips-unknown-sysv*)
428     ;;
429  mips*-*-linux*)
430     ;;
431  mips-*-*)
432     machdep="mips_sgi_mach_dep.lo"
433     ;;
434  sparc-*-netbsd*)
435     machdep="sparc_netbsd_mach_dep.lo"
436     ;;
437  sparc-sun-solaris2.3)
438     machdep="sparc_mach_dep.lo"
439     AC_DEFINE(SUNOS53_SHARED_LIB,1,[Avoid Solaris 5.3 dynamic library bug])
440     ;;
441  sparc*-sun-solaris2.*)
442     machdep="sparc_mach_dep.lo"
443     ;;
444  ia64-*-*)
445     machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
446     ;;
447 esac
448 AC_DEFINE(NO_EXECUTE_PERMISSION,1,[cause some or all of the heap to not have execute permission])
449 if test x"$machdep" = x; then
450 AC_MSG_RESULT($machdep)
451    machdep="mach_dep.lo"
452 fi
453 addobjs="$addobjs $machdep"
454 AC_SUBST(addobjs)
455 AC_SUBST(addincludes)
456 AC_SUBST(addlibs)
457 AC_SUBST(addtests)
458
459 #
460 # Check for AViiON Machines running DGUX
461 #
462 ac_is_dgux=no
463 AC_CHECK_HEADER(sys/dg_sys_info.h, [ac_is_dgux=yes])
464
465 AC_MSG_CHECKING(if host is AViiON running DGUX)
466 AC_MSG_RESULT($ac_is_dgux)
467     ## :GOTCHA: we do not check anything but sys/dg_sys_info.h
468 if test $ac_is_dgux = yes; then
469     if test "$enable_full_debug" = "yes"; then
470         GC_CFLAGS="$GC_CFLAGS -mstandard"
471     fi
472     GC_CFLAGS="$GC_CFLAGS -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend"
473 fi
474
475 dnl As of 4.13a2, the collector will not properly work on Solaris when
476 dnl built with gcc and -O.  So we remove -O in the appropriate case.
477 dnl Not needed anymore on Solaris.
478 AC_MSG_CHECKING([whether GCC optimization should be disabled])
479 O0_CFLAGS=
480 case "$host" in
481  *aix*) test "$GCC" = yes && O0_CFLAGS=-O0 ;;
482  *) ;;
483 esac
484 if test x"$O0_CFLAGS" != x; then
485    AC_MSG_RESULT(yes)
486 else
487    AC_MSG_RESULT(no)
488 fi
489 AC_SUBST([O0_CFLAGS])
490
491 dnl Include defines that have become de facto standard.
492 dnl ALL_INTERIOR_POINTERS can be overridden in startup code.
493 AC_DEFINE(SILENT,1,[disables statistics printing])
494 AC_DEFINE(NO_SIGNALS,1,[does not disable signals])
495 AC_DEFINE(ALL_INTERIOR_POINTERS,1,[allows all pointers to the interior of objects to be recognized])
496
497 dnl By default, make the library as general as possible.
498 AC_DEFINE(JAVA_FINALIZATION,1,[make it somewhat safer to finalize objects out of order])
499 AC_DEFINE(GC_GCJ_SUPPORT,1,[include support for gcj])
500 AC_DEFINE(ATOMIC_UNCOLLECTABLE,1,[include code for GC_malloc_atomic_uncollectable])
501
502 AC_ARG_ENABLE(gc-debug,
503 [  --enable-gc-debug    include full support for pointer backtracing etc.],
504 [ if test "$enable_gc_debug" = "yes"; then
505     AC_MSG_WARN("Must define GC_DEBUG and use debug alloc. in clients.")
506     AC_DEFINE(KEEP_BACK_PTRS,1,[Add code to save back pointers])
507     AC_DEFINE(DBG_HDRS_ALL,1,[Make sure that all objects have debug headers])
508     case $host in
509       ia64-*-linux* )
510         AC_DEFINE(MAKE_BACK_GRAPH,1,[Enable GC_PRINT_BACK_HEIGHT environment variable])
511       ;;
512       x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
513         AC_DEFINE(MAKE_BACK_GRAPH,1)
514         AC_MSG_WARN("Client must not use -fomit-frame-pointer.")
515         AC_DEFINE(SAVE_CALL_COUNT, 8, [number of call frames saved with objects allocated through the debugging interface])
516       ;;
517       i[3456]86-*-dgux*)
518         AC_DEFINE(MAKE_BACK_GRAPH,1)
519       ;;
520     esac 
521   fi])
522
523 if test "${gc_use_mmap}" = "yes"; then
524   AC_DEFINE(USE_MMAP, 1, [use MMAP instead of sbrk to get new memory])
525 fi
526
527 if test -n "$with_cross_host" &&
528    test x"$with_cross_host" != x"no"; then
529   toolexecdir='$(exec_prefix)/$(target_noncanonical)'
530   toolexeclibdir='$(toolexecdir)/lib'
531 else
532   toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
533   toolexeclibdir='$(libdir)'
534 fi
535 multi_os_directory=`$CC -print-multi-os-directory`
536 case $multi_os_directory in
537   .) ;; # Avoid trailing /.
538   *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
539 esac
540 AC_SUBST(toolexecdir)
541 AC_SUBST(toolexeclibdir)
542
543 if test "${multilib}" = "yes"; then
544   multilib_arg="--enable-multilib"
545 else
546   multilib_arg=
547 fi
548
549 AC_CONFIG_HEADERS([include/gc_config.h include/gc_ext_config.h])
550
551 AC_CONFIG_FILES(Makefile include/Makefile threads.mk)
552 AC_OUTPUT