frontend/nbproject/build-impl.xml

   1 <?xml version="1.0" encoding="UTF-8"?>\r
   2 <!--\r
   3 *** GENERATED FROM project.xml - DO NOT EDIT  ***\r
   4 ***         EDIT ../build.xml INSTEAD         ***\r
   5 \r
   6 For the purpose of easier reading the script\r
   7 is divided into following sections:\r
   8 \r
   9   - initialization\r
  10   - compilation\r
  11   - jar\r
  12   - execution\r
  13   - debugging\r
  14   - javadoc\r
  15   - junit compilation\r
  16   - junit execution\r
  17   - junit debugging\r
  18   - applet\r
  19   - cleanup\r
  20 \r
  21         -->\r
  22 <project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="Saccubus-impl">\r
  23     <fail message="Please build using Ant 1.7.1 or higher.">\r
  24         <condition>\r
  25             <not>\r
  26                 <antversion atleast="1.7.1"/>\r
  27             </not>\r
  28         </condition>\r
  29     </fail>\r
  30     <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>\r
  31     <!-- \r
  32                 ======================\r
  33                 INITIALIZATION SECTION \r
  34                 ======================\r
  35             -->\r
  36     <target name="-pre-init">\r
  37         <!-- Empty placeholder for easier customization. -->\r
  38         <!-- You can override this target in the ../build.xml file. -->\r
  39     </target>\r
  40     <target depends="-pre-init" name="-init-private">\r
  41         <property file="nbproject/private/config.properties"/>\r
  42         <property file="nbproject/private/configs/${config}.properties"/>\r
  43         <property file="nbproject/private/private.properties"/>\r
  44     </target>\r
  45     <target depends="-pre-init,-init-private" name="-init-user">\r
  46         <property file="${user.properties.file}"/>\r
  47         <!-- The two properties below are usually overridden -->\r
  48         <!-- by the active platform. Just a fallback. -->\r
  49         <property name="default.javac.source" value="1.4"/>\r
  50         <property name="default.javac.target" value="1.4"/>\r
  51     </target>\r
  52     <target depends="-pre-init,-init-private,-init-user" name="-init-project">\r
  53         <property file="nbproject/configs/${config}.properties"/>\r
  54         <property file="nbproject/project.properties"/>\r
  55     </target>\r
  56     <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">\r
  57         <available file="${manifest.file}" property="manifest.available"/>\r
  58         <condition property="main.class.available">\r
  59             <and>\r
  60                 <isset property="main.class"/>\r
  61                 <not>\r
  62                     <equals arg1="${main.class}" arg2="" trim="true"/>\r
  63                 </not>\r
  64             </and>\r
  65         </condition>\r
  66         <condition property="manifest.available+main.class">\r
  67             <and>\r
  68                 <isset property="manifest.available"/>\r
  69                 <isset property="main.class.available"/>\r
  70             </and>\r
  71         </condition>\r
  72         <condition property="do.mkdist">\r
  73             <and>\r
  74                 <isset property="libs.CopyLibs.classpath"/>\r
  75                 <not>\r
  76                     <istrue value="${mkdist.disabled}"/>\r
  77                 </not>\r
  78             </and>\r
  79         </condition>\r
  80         <condition property="manifest.available+main.class+mkdist.available">\r
  81             <and>\r
  82                 <istrue value="${manifest.available+main.class}"/>\r
  83                 <isset property="do.mkdist"/>\r
  84             </and>\r
  85         </condition>\r
  86         <condition property="manifest.available+mkdist.available">\r
  87             <and>\r
  88                 <istrue value="${manifest.available}"/>\r
  89                 <isset property="do.mkdist"/>\r
  90             </and>\r
  91         </condition>\r
  92         <condition property="manifest.available-mkdist.available">\r
  93             <or>\r
  94                 <istrue value="${manifest.available}"/>\r
  95                 <isset property="do.mkdist"/>\r
  96             </or>\r
  97         </condition>\r
  98         <condition property="manifest.available+main.class-mkdist.available">\r
  99             <or>\r
 100                 <istrue value="${manifest.available+main.class}"/>\r
 101                 <isset property="do.mkdist"/>\r
 102             </or>\r
 103         </condition>\r
 104         <condition property="have.tests">\r
 105             <or>\r
 106                 <available file="${test.src.dir}"/>\r
 107             </or>\r
 108         </condition>\r
 109         <condition property="have.sources">\r
 110             <or>\r
 111                 <available file="${src.dir}"/>\r
 112             </or>\r
 113         </condition>\r
 114         <condition property="netbeans.home+have.tests">\r
 115             <and>\r
 116                 <isset property="netbeans.home"/>\r
 117                 <isset property="have.tests"/>\r
 118             </and>\r
 119         </condition>\r
 120         <condition property="no.javadoc.preview">\r
 121             <and>\r
 122                 <isset property="javadoc.preview"/>\r
 123                 <isfalse value="${javadoc.preview}"/>\r
 124             </and>\r
 125         </condition>\r
 126         <property name="run.jvmargs" value=""/>\r
 127         <property name="javac.compilerargs" value=""/>\r
 128         <property name="work.dir" value="${basedir}"/>\r
 129         <condition property="no.deps">\r
 130             <and>\r
 131                 <istrue value="${no.dependencies}"/>\r
 132             </and>\r
 133         </condition>\r
 134         <property name="javac.debug" value="true"/>\r
 135         <property name="javadoc.preview" value="true"/>\r
 136         <property name="application.args" value=""/>\r
 137         <property name="source.encoding" value="${file.encoding}"/>\r
 138         <property name="runtime.encoding" value="${source.encoding}"/>\r
 139         <condition property="javadoc.encoding.used" value="${javadoc.encoding}">\r
 140             <and>\r
 141                 <isset property="javadoc.encoding"/>\r
 142                 <not>\r
 143                     <equals arg1="${javadoc.encoding}" arg2=""/>\r
 144                 </not>\r
 145             </and>\r
 146         </condition>\r
 147         <property name="javadoc.encoding.used" value="${source.encoding}"/>\r
 148         <property name="includes" value="**"/>\r
 149         <property name="excludes" value=""/>\r
 150         <property name="do.depend" value="false"/>\r
 151         <condition property="do.depend.true">\r
 152             <istrue value="${do.depend}"/>\r
 153         </condition>\r
 154         <path id="endorsed.classpath.path" path="${endorsed.classpath}"/>\r
 155         <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'">\r
 156             <length length="0" string="${endorsed.classpath}" when="greater"/>\r
 157         </condition>\r
 158     </target>\r
 159     <target name="-post-init">\r
 160         <!-- Empty placeholder for easier customization. -->\r
 161         <!-- You can override this target in the ../build.xml file. -->\r
 162     </target>\r
 163     <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">\r
 164         <fail unless="src.dir">Must set src.dir</fail>\r
 165         <fail unless="test.src.dir">Must set test.src.dir</fail>\r
 166         <fail unless="build.dir">Must set build.dir</fail>\r
 167         <fail unless="dist.dir">Must set dist.dir</fail>\r
 168         <fail unless="build.classes.dir">Must set build.classes.dir</fail>\r
 169         <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>\r
 170         <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>\r
 171         <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>\r
 172         <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>\r
 173         <fail unless="dist.jar">Must set dist.jar</fail>\r
 174     </target>\r
 175     <target name="-init-macrodef-property">\r
 176         <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">\r
 177             <attribute name="name"/>\r
 178             <attribute name="value"/>\r
 179             <sequential>\r
 180                 <property name="@{name}" value="${@{value}}"/>\r
 181             </sequential>\r
 182         </macrodef>\r
 183     </target>\r
 184     <target name="-init-macrodef-javac">\r
 185         <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">\r
 186             <attribute default="${src.dir}" name="srcdir"/>\r
 187             <attribute default="${build.classes.dir}" name="destdir"/>\r
 188             <attribute default="${javac.classpath}" name="classpath"/>\r
 189             <attribute default="${includes}" name="includes"/>\r
 190             <attribute default="${excludes}" name="excludes"/>\r
 191             <attribute default="${javac.debug}" name="debug"/>\r
 192             <attribute default="${empty.dir}" name="sourcepath"/>\r
 193             <attribute default="${empty.dir}" name="gensrcdir"/>\r
 194             <element name="customize" optional="true"/>\r
 195             <sequential>\r
 196                 <property location="${build.dir}/empty" name="empty.dir"/>\r
 197                 <mkdir dir="${empty.dir}"/>\r
 198                 <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}">\r
 199                     <src>\r
 200                         <dirset dir="@{gensrcdir}" erroronmissingdir="false">\r
 201                             <include name="*"/>\r
 202                         </dirset>\r
 203                     </src>\r
 204                     <classpath>\r
 205                         <path path="@{classpath}"/>\r
 206                     </classpath>\r
 207                     <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>\r
 208                     <compilerarg line="${javac.compilerargs}"/>\r
 209                     <customize/>\r
 210                 </javac>\r
 211             </sequential>\r
 212         </macrodef>\r
 213         <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">\r
 214             <attribute default="${src.dir}" name="srcdir"/>\r
 215             <attribute default="${build.classes.dir}" name="destdir"/>\r
 216             <attribute default="${javac.classpath}" name="classpath"/>\r
 217             <sequential>\r
 218                 <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">\r
 219                     <classpath>\r
 220                         <path path="@{classpath}"/>\r
 221                     </classpath>\r
 222                 </depend>\r
 223             </sequential>\r
 224         </macrodef>\r
 225         <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">\r
 226             <attribute default="${build.classes.dir}" name="destdir"/>\r
 227             <sequential>\r
 228                 <fail unless="javac.includes">Must set javac.includes</fail>\r
 229                 <pathconvert pathsep="," property="javac.includes.binary">\r
 230                     <path>\r
 231                         <filelist dir="@{destdir}" files="${javac.includes}"/>\r
 232                     </path>\r
 233                     <globmapper from="*.java" to="*.class"/>\r
 234                 </pathconvert>\r
 235                 <delete>\r
 236                     <files includes="${javac.includes.binary}"/>\r
 237                 </delete>\r
 238             </sequential>\r
 239         </macrodef>\r
 240     </target>\r
 241     <target name="-init-macrodef-junit">\r
 242         <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">\r
 243             <attribute default="${includes}" name="includes"/>\r
 244             <attribute default="${excludes}" name="excludes"/>\r
 245             <attribute default="**" name="testincludes"/>\r
 246             <sequential>\r
 247                 <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true">\r
 248                     <batchtest todir="${build.test.results.dir}">\r
 249                         <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">\r
 250                             <filename name="@{testincludes}"/>\r
 251                         </fileset>\r
 252                     </batchtest>\r
 253                     <classpath>\r
 254                         <path path="${run.test.classpath}"/>\r
 255                     </classpath>\r
 256                     <syspropertyset>\r
 257                         <propertyref prefix="test-sys-prop."/>\r
 258                         <mapper from="test-sys-prop.*" to="*" type="glob"/>\r
 259                     </syspropertyset>\r
 260                     <formatter type="brief" usefile="false"/>\r
 261                     <formatter type="xml"/>\r
 262                     <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>\r
 263                     <jvmarg line="${run.jvmargs}"/>\r
 264                 </junit>\r
 265             </sequential>\r
 266         </macrodef>\r
 267     </target>\r
 268     <target depends="-init-debug-args" name="-init-macrodef-nbjpda">\r
 269         <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">\r
 270             <attribute default="${main.class}" name="name"/>\r
 271             <attribute default="${debug.classpath}" name="classpath"/>\r
 272             <attribute default="" name="stopclassname"/>\r
 273             <sequential>\r
 274                 <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}">\r
 275                     <classpath>\r
 276                         <path path="@{classpath}"/>\r
 277                     </classpath>\r
 278                 </nbjpdastart>\r
 279             </sequential>\r
 280         </macrodef>\r
 281         <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">\r
 282             <attribute default="${build.classes.dir}" name="dir"/>\r
 283             <sequential>\r
 284                 <nbjpdareload>\r
 285                     <fileset dir="@{dir}" includes="${fix.classes}">\r
 286                         <include name="${fix.includes}*.class"/>\r
 287                     </fileset>\r
 288                 </nbjpdareload>\r
 289             </sequential>\r
 290         </macrodef>\r
 291     </target>\r
 292     <target name="-init-debug-args">\r
 293         <property name="version-output" value="java version &quot;${ant.java.version}"/>\r
 294         <condition property="have-jdk-older-than-1.4">\r
 295             <or>\r
 296                 <contains string="${version-output}" substring="java version &quot;1.0"/>\r
 297                 <contains string="${version-output}" substring="java version &quot;1.1"/>\r
 298                 <contains string="${version-output}" substring="java version &quot;1.2"/>\r
 299                 <contains string="${version-output}" substring="java version &quot;1.3"/>\r
 300             </or>\r
 301         </condition>\r
 302         <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">\r
 303             <istrue value="${have-jdk-older-than-1.4}"/>\r
 304         </condition>\r
 305         <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">\r
 306             <os family="windows"/>\r
 307         </condition>\r
 308         <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">\r
 309             <isset property="debug.transport"/>\r
 310         </condition>\r
 311     </target>\r
 312     <target depends="-init-debug-args" name="-init-macrodef-debug">\r
 313         <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">\r
 314             <attribute default="${main.class}" name="classname"/>\r
 315             <attribute default="${debug.classpath}" name="classpath"/>\r
 316             <element name="customize" optional="true"/>\r
 317             <sequential>\r
 318                 <java classname="@{classname}" dir="${work.dir}" fork="true">\r
 319                     <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>\r
 320                     <jvmarg line="${debug-args-line}"/>\r
 321                     <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>\r
 322                     <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>\r
 323                     <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>\r
 324                     <jvmarg line="${run.jvmargs}"/>\r
 325                     <classpath>\r
 326                         <path path="@{classpath}"/>\r
 327                     </classpath>\r
 328                     <syspropertyset>\r
 329                         <propertyref prefix="run-sys-prop."/>\r
 330                         <mapper from="run-sys-prop.*" to="*" type="glob"/>\r
 331                     </syspropertyset>\r
 332                     <customize/>\r
 333                 </java>\r
 334             </sequential>\r
 335         </macrodef>\r
 336     </target>\r
 337     <target name="-init-macrodef-java">\r
 338         <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">\r
 339             <attribute default="${main.class}" name="classname"/>\r
 340             <attribute default="${run.classpath}" name="classpath"/>\r
 341             <element name="customize" optional="true"/>\r
 342             <sequential>\r
 343                 <java classname="@{classname}" dir="${work.dir}" fork="true">\r
 344                     <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>\r
 345                     <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>\r
 346                     <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>\r
 347                     <jvmarg line="${run.jvmargs}"/>\r
 348                     <classpath>\r
 349                         <path path="@{classpath}"/>\r
 350                     </classpath>\r
 351                     <syspropertyset>\r
 352                         <propertyref prefix="run-sys-prop."/>\r
 353                         <mapper from="run-sys-prop.*" to="*" type="glob"/>\r
 354                     </syspropertyset>\r
 355                     <customize/>\r
 356                 </java>\r
 357             </sequential>\r
 358         </macrodef>\r
 359     </target>\r
 360     <target name="-init-presetdef-jar">\r
 361         <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">\r
 362             <jar compress="${jar.compress}" jarfile="${dist.jar}">\r
 363                 <j2seproject1:fileset dir="${build.classes.dir}"/>\r
 364             </jar>\r
 365         </presetdef>\r
 366     </target>\r
 367     <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/>\r
 368     <!--\r
 369                 ===================\r
 370                 COMPILATION SECTION\r
 371                 ===================\r
 372             -->\r
 373     <target name="-deps-jar-init" unless="built-jar.properties">\r
 374         <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/>\r
 375         <delete file="${built-jar.properties}" quiet="true"/>\r
 376     </target>\r
 377     <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps">\r
 378         <mkdir dir="${build.dir}"/>\r
 379         <touch file="${built-jar.properties}" verbose="false"/>\r
 380         <property file="${built-jar.properties}" prefix="already.built.jar."/>\r
 381         <fail message="Cycle detected: Saccubus was already built">\r
 382             <condition>\r
 383                 <isset property="already.built.jar.${basedir}"/>\r
 384             </condition>\r
 385         </fail>\r
 386         <propertyfile file="${built-jar.properties}">\r
 387             <entry key="${basedir}" value=""/>\r
 388         </propertyfile>\r
 389         <antcall target="-maybe-call-dep">\r
 390             <param name="call.built.properties" value="${built-jar.properties}"/>\r
 391             <param location="${project.NicoBrowser}" name="call.subproject"/>\r
 392             <param location="${project.NicoBrowser}/build.xml" name="call.script"/>\r
 393             <param name="call.target" value="jar"/>\r
 394             <param name="transfer.built-jar.properties" value="${built-jar.properties}"/>\r
 395         </antcall>\r
 396     </target>\r
 397     <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/>\r
 398     <target depends="init" name="-check-automatic-build">\r
 399         <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/>\r
 400     </target>\r
 401     <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build">\r
 402         <antcall target="clean"/>\r
 403     </target>\r
 404     <target depends="init,deps-jar" name="-pre-pre-compile">\r
 405         <mkdir dir="${build.classes.dir}"/>\r
 406     </target>\r
 407     <target name="-pre-compile">\r
 408         <!-- Empty placeholder for easier customization. -->\r
 409         <!-- You can override this target in the ../build.xml file. -->\r
 410     </target>\r
 411     <target if="do.depend.true" name="-compile-depend">\r
 412         <pathconvert property="build.generated.subdirs">\r
 413             <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false">\r
 414                 <include name="*"/>\r
 415             </dirset>\r
 416         </pathconvert>\r
 417         <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/>\r
 418     </target>\r
 419     <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile">\r
 420         <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/>\r
 421         <copy todir="${build.classes.dir}">\r
 422             <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>\r
 423         </copy>\r
 424     </target>\r
 425     <target name="-post-compile">\r
 426         <!-- Empty placeholder for easier customization. -->\r
 427         <!-- You can override this target in the ../build.xml file. -->\r
 428     </target>\r
 429     <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>\r
 430     <target name="-pre-compile-single">\r
 431         <!-- Empty placeholder for easier customization. -->\r
 432         <!-- You can override this target in the ../build.xml file. -->\r
 433     </target>\r
 434     <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">\r
 435         <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>\r
 436         <j2seproject3:force-recompile/>\r
 437         <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/>\r
 438     </target>\r
 439     <target name="-post-compile-single">\r
 440         <!-- Empty placeholder for easier customization. -->\r
 441         <!-- You can override this target in the ../build.xml file. -->\r
 442     </target>\r
 443     <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>\r
 444     <!--\r
 445                 ====================\r
 446                 JAR BUILDING SECTION\r
 447                 ====================\r
 448             -->\r
 449     <target depends="init" name="-pre-pre-jar">\r
 450         <dirname file="${dist.jar}" property="dist.jar.dir"/>\r
 451         <mkdir dir="${dist.jar.dir}"/>\r
 452     </target>\r
 453     <target name="-pre-jar">\r
 454         <!-- Empty placeholder for easier customization. -->\r
 455         <!-- You can override this target in the ../build.xml file. -->\r
 456     </target>\r
 457     <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available-mkdist.available">\r
 458         <j2seproject1:jar/>\r
 459     </target>\r
 460     <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class-mkdist.available">\r
 461         <j2seproject1:jar manifest="${manifest.file}"/>\r
 462     </target>\r
 463     <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">\r
 464         <j2seproject1:jar manifest="${manifest.file}">\r
 465             <j2seproject1:manifest>\r
 466                 <j2seproject1:attribute name="Main-Class" value="${main.class}"/>\r
 467             </j2seproject1:manifest>\r
 468         </j2seproject1:jar>\r
 469         <echo>To run this application from the command line without Ant, try:</echo>\r
 470         <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>\r
 471         <property location="${dist.jar}" name="dist.jar.resolved"/>\r
 472         <pathconvert property="run.classpath.with.dist.jar">\r
 473             <path path="${run.classpath}"/>\r
 474             <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>\r
 475         </pathconvert>\r
 476         <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>\r
 477     </target>\r
 478     <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries">\r
 479         <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>\r
 480         <pathconvert property="run.classpath.without.build.classes.dir">\r
 481             <path path="${run.classpath}"/>\r
 482             <map from="${build.classes.dir.resolved}" to=""/>\r
 483         </pathconvert>\r
 484         <pathconvert pathsep=" " property="jar.classpath">\r
 485             <path path="${run.classpath.without.build.classes.dir}"/>\r
 486             <chainedmapper>\r
 487                 <flattenmapper/>\r
 488                 <globmapper from="*" to="lib/*"/>\r
 489             </chainedmapper>\r
 490         </pathconvert>\r
 491         <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>\r
 492         <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">\r
 493             <fileset dir="${build.classes.dir}"/>\r
 494             <manifest>\r
 495                 <attribute name="Main-Class" value="${main.class}"/>\r
 496                 <attribute name="Class-Path" value="${jar.classpath}"/>\r
 497             </manifest>\r
 498         </copylibs>\r
 499         <echo>To run this application from the command line without Ant, try:</echo>\r
 500         <property location="${dist.jar}" name="dist.jar.resolved"/>\r
 501         <echo>java -jar "${dist.jar.resolved}"</echo>\r
 502     </target>\r
 503     <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+mkdist.available" name="-do-jar-with-libraries-without-mainclass" unless="main.class.available">\r
 504         <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>\r
 505         <pathconvert property="run.classpath.without.build.classes.dir">\r
 506             <path path="${run.classpath}"/>\r
 507             <map from="${build.classes.dir.resolved}" to=""/>\r
 508         </pathconvert>\r
 509         <pathconvert pathsep=" " property="jar.classpath">\r
 510             <path path="${run.classpath.without.build.classes.dir}"/>\r
 511             <chainedmapper>\r
 512                 <flattenmapper/>\r
 513                 <globmapper from="*" to="lib/*"/>\r
 514             </chainedmapper>\r
 515         </pathconvert>\r
 516         <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>\r
 517         <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">\r
 518             <fileset dir="${build.classes.dir}"/>\r
 519             <manifest>\r
 520                 <attribute name="Class-Path" value="${jar.classpath}"/>\r
 521             </manifest>\r
 522         </copylibs>\r
 523     </target>\r
 524     <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.mkdist" name="-do-jar-with-libraries-without-manifest" unless="manifest.available">\r
 525         <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>\r
 526         <pathconvert property="run.classpath.without.build.classes.dir">\r
 527             <path path="${run.classpath}"/>\r
 528             <map from="${build.classes.dir.resolved}" to=""/>\r
 529         </pathconvert>\r
 530         <pathconvert pathsep=" " property="jar.classpath">\r
 531             <path path="${run.classpath.without.build.classes.dir}"/>\r
 532             <chainedmapper>\r
 533                 <flattenmapper/>\r
 534                 <globmapper from="*" to="lib/*"/>\r
 535             </chainedmapper>\r
 536         </pathconvert>\r
 537         <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>\r
 538         <copylibs compress="${jar.compress}" jarfile="${dist.jar}" runtimeclasspath="${run.classpath.without.build.classes.dir}">\r
 539             <fileset dir="${build.classes.dir}"/>\r
 540             <manifest>\r
 541                 <attribute name="Class-Path" value="${jar.classpath}"/>\r
 542             </manifest>\r
 543         </copylibs>\r
 544     </target>\r
 545     <target name="-post-jar">\r
 546         <!-- Empty placeholder for easier customization. -->\r
 547         <!-- You can override this target in the ../build.xml file. -->\r
 548     </target>\r
 549     <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-do-jar-with-libraries-without-mainclass,-do-jar-with-libraries-without-manifest,-post-jar" description="Build JAR." name="jar"/>\r
 550     <!--\r
 551                 =================\r
 552                 EXECUTION SECTION\r
 553                 =================\r
 554             -->\r
 555     <target depends="init,compile" description="Run a main class." name="run">\r
 556         <j2seproject1:java>\r
 557             <customize>\r
 558                 <arg line="${application.args}"/>\r
 559             </customize>\r
 560         </j2seproject1:java>\r
 561     </target>\r
 562     <target name="-do-not-recompile">\r
 563         <property name="javac.includes.binary" value=""/>\r
 564     </target>\r
 565     <target depends="init,-do-not-recompile,compile-single" name="run-single">\r
 566         <fail unless="run.class">Must select one file in the IDE or set run.class</fail>\r
 567         <j2seproject1:java classname="${run.class}"/>\r
 568     </target>\r
 569     <target depends="init,-do-not-recompile,compile-test-single" name="run-test-with-main">\r
 570         <fail unless="run.class">Must select one file in the IDE or set run.class</fail>\r
 571         <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/>\r
 572     </target>\r
 573     <!--\r
 574                 =================\r
 575                 DEBUGGING SECTION\r
 576                 =================\r
 577             -->\r
 578     <target depends="init" if="netbeans.home" name="-debug-start-debugger">\r
 579         <j2seproject1:nbjpdastart name="${debug.class}"/>\r
 580     </target>\r
 581     <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test">\r
 582         <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/>\r
 583     </target>\r
 584     <target depends="init,compile" name="-debug-start-debuggee">\r
 585         <j2seproject3:debug>\r
 586             <customize>\r
 587                 <arg line="${application.args}"/>\r
 588             </customize>\r
 589         </j2seproject3:debug>\r
 590     </target>\r
 591     <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>\r
 592     <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">\r
 593         <j2seproject1:nbjpdastart stopclassname="${main.class}"/>\r
 594     </target>\r
 595     <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>\r
 596     <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">\r
 597         <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>\r
 598         <j2seproject3:debug classname="${debug.class}"/>\r
 599     </target>\r
 600     <target depends="init,-do-not-recompile,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>\r
 601     <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test">\r
 602         <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>\r
 603         <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/>\r
 604     </target>\r
 605     <target depends="init,-do-not-recompile,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/>\r
 606     <target depends="init" name="-pre-debug-fix">\r
 607         <fail unless="fix.includes">Must set fix.includes</fail>\r
 608         <property name="javac.includes" value="${fix.includes}.java"/>\r
 609     </target>\r
 610     <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">\r
 611         <j2seproject1:nbjpdareload/>\r
 612     </target>\r
 613     <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>\r
 614     <!--\r
 615                 ===============\r
 616                 JAVADOC SECTION\r
 617                 ===============\r
 618             -->\r
 619     <target depends="init" name="-javadoc-build">\r
 620         <mkdir dir="${dist.javadoc.dir}"/>\r
 621         <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">\r
 622             <classpath>\r
 623                 <path path="${javac.classpath}"/>\r
 624             </classpath>\r
 625             <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">\r
 626                 <filename name="**/*.java"/>\r
 627             </fileset>\r
 628             <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">\r
 629                 <include name="**/*.java"/>\r
 630             </fileset>\r
 631         </javadoc>\r
 632     </target>\r
 633     <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">\r
 634         <nbbrowse file="${dist.javadoc.dir}/index.html"/>\r
 635     </target>\r
 636     <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>\r
 637     <!--\r
 638                 =========================\r
 639                 JUNIT COMPILATION SECTION\r
 640                 =========================\r
 641             -->\r
 642     <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">\r
 643         <mkdir dir="${build.test.classes.dir}"/>\r
 644     </target>\r
 645     <target name="-pre-compile-test">\r
 646         <!-- Empty placeholder for easier customization. -->\r
 647         <!-- You can override this target in the ../build.xml file. -->\r
 648     </target>\r
 649     <target if="do.depend.true" name="-compile-test-depend">\r
 650         <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>\r
 651     </target>\r
 652     <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">\r
 653         <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>\r
 654         <copy todir="${build.test.classes.dir}">\r
 655             <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>\r
 656         </copy>\r
 657     </target>\r
 658     <target name="-post-compile-test">\r
 659         <!-- Empty placeholder for easier customization. -->\r
 660         <!-- You can override this target in the ../build.xml file. -->\r
 661     </target>\r
 662     <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>\r
 663     <target name="-pre-compile-test-single">\r
 664         <!-- Empty placeholder for easier customization. -->\r
 665         <!-- You can override this target in the ../build.xml file. -->\r
 666     </target>\r
 667     <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">\r
 668         <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>\r
 669         <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>\r
 670         <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/>\r
 671         <copy todir="${build.test.classes.dir}">\r
 672             <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>\r
 673         </copy>\r
 674     </target>\r
 675     <target name="-post-compile-test-single">\r
 676         <!-- Empty placeholder for easier customization. -->\r
 677         <!-- You can override this target in the ../build.xml file. -->\r
 678     </target>\r
 679     <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>\r
 680     <!--\r
 681                 =======================\r
 682                 JUNIT EXECUTION SECTION\r
 683                 =======================\r
 684             -->\r
 685     <target depends="init" if="have.tests" name="-pre-test-run">\r
 686         <mkdir dir="${build.test.results.dir}"/>\r
 687     </target>\r
 688     <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">\r
 689         <j2seproject3:junit testincludes="**/*Test.java"/>\r
 690     </target>\r
 691     <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">\r
 692         <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>\r
 693     </target>\r
 694     <target depends="init" if="have.tests" name="test-report"/>\r
 695     <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>\r
 696     <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>\r
 697     <target depends="init" if="have.tests" name="-pre-test-run-single">\r
 698         <mkdir dir="${build.test.results.dir}"/>\r
 699     </target>\r
 700     <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">\r
 701         <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>\r
 702         <j2seproject3:junit excludes="" includes="${test.includes}"/>\r
 703     </target>\r
 704     <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">\r
 705         <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>\r
 706     </target>\r
 707     <target depends="init,-do-not-recompile,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>\r
 708     <!--\r
 709                 =======================\r
 710                 JUNIT DEBUGGING SECTION\r
 711                 =======================\r
 712             -->\r
 713     <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">\r
 714         <fail unless="test.class">Must select one file in the IDE or set test.class</fail>\r
 715         <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>\r
 716         <delete file="${test.report.file}"/>\r
 717         <mkdir dir="${build.test.results.dir}"/>\r
 718         <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">\r
 719             <customize>\r
 720                 <syspropertyset>\r
 721                     <propertyref prefix="test-sys-prop."/>\r
 722                     <mapper from="test-sys-prop.*" to="*" type="glob"/>\r
 723                 </syspropertyset>\r
 724                 <arg value="${test.class}"/>\r
 725                 <arg value="showoutput=true"/>\r
 726                 <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>\r
 727                 <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>\r
 728             </customize>\r
 729         </j2seproject3:debug>\r
 730     </target>\r
 731     <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">\r
 732         <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>\r
 733     </target>\r
 734     <target depends="init,-do-not-recompile,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>\r
 735     <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">\r
 736         <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>\r
 737     </target>\r
 738     <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>\r
 739     <!--\r
 740                 =========================\r
 741                 APPLET EXECUTION SECTION\r
 742                 =========================\r
 743             -->\r
 744     <target depends="init,compile-single" name="run-applet">\r
 745         <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>\r
 746         <j2seproject1:java classname="sun.applet.AppletViewer">\r
 747             <customize>\r
 748                 <arg value="${applet.url}"/>\r
 749             </customize>\r
 750         </j2seproject1:java>\r
 751     </target>\r
 752     <!--\r
 753                 =========================\r
 754                 APPLET DEBUGGING  SECTION\r
 755                 =========================\r
 756             -->\r
 757     <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">\r
 758         <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>\r
 759         <j2seproject3:debug classname="sun.applet.AppletViewer">\r
 760             <customize>\r
 761                 <arg value="${applet.url}"/>\r
 762             </customize>\r
 763         </j2seproject3:debug>\r
 764     </target>\r
 765     <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>\r
 766     <!--\r
 767                 ===============\r
 768                 CLEANUP SECTION\r
 769                 ===============\r
 770             -->\r
 771     <target name="-deps-clean-init" unless="built-clean.properties">\r
 772         <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/>\r
 773         <delete file="${built-clean.properties}" quiet="true"/>\r
 774     </target>\r
 775     <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps">\r
 776         <mkdir dir="${build.dir}"/>\r
 777         <touch file="${built-clean.properties}" verbose="false"/>\r
 778         <property file="${built-clean.properties}" prefix="already.built.clean."/>\r
 779         <fail message="Cycle detected: Saccubus was already built">\r
 780             <condition>\r
 781                 <isset property="already.built.clean.${basedir}"/>\r
 782             </condition>\r
 783         </fail>\r
 784         <propertyfile file="${built-clean.properties}">\r
 785             <entry key="${basedir}" value=""/>\r
 786         </propertyfile>\r
 787         <antcall target="-maybe-call-dep">\r
 788             <param name="call.built.properties" value="${built-clean.properties}"/>\r
 789             <param location="${project.NicoBrowser}" name="call.subproject"/>\r
 790             <param location="${project.NicoBrowser}/build.xml" name="call.script"/>\r
 791             <param name="call.target" value="clean"/>\r
 792             <param name="transfer.built-clean.properties" value="${built-clean.properties}"/>\r
 793         </antcall>\r
 794     </target>\r
 795     <target depends="init" name="-do-clean">\r
 796         <delete dir="${build.dir}"/>\r
 797         <delete dir="${dist.dir}"/>\r
 798     </target>\r
 799     <target name="-post-clean">\r
 800         <!-- Empty placeholder for easier customization. -->\r
 801         <!-- You can override this target in the ../build.xml file. -->\r
 802     </target>\r
 803     <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>\r
 804     <target name="-check-call-dep">\r
 805         <property file="${call.built.properties}" prefix="already.built."/>\r
 806         <condition property="should.call.dep">\r
 807             <not>\r
 808                 <isset property="already.built.${call.subproject}"/>\r
 809             </not>\r
 810         </condition>\r
 811     </target>\r
 812     <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep">\r
 813         <ant antfile="${call.script}" inheritall="false" target="${call.target}">\r
 814             <propertyset>\r
 815                 <propertyref prefix="transfer."/>\r
 816                 <mapper from="transfer.*" to="*" type="glob"/>\r
 817             </propertyset>\r
 818         </ant>\r
 819     </target>\r
 820 </project>\r