OSDN Git Service

Merge branch 'systemd'
[clfsja/cross-lfs-ja.git] / src / partitioning / Makefile.in
1 # Makefile.in generated by automake 1.15 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
9
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13 # PARTICULAR PURPOSE.
14
15 @SET_MAKE@
16 VPATH = @srcdir@
17 am__is_gnu_make = { \
18   if test -z '$(MAKELEVEL)'; then \
19     false; \
20   elif test -n '$(MAKE_HOST)'; then \
21     true; \
22   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
23     true; \
24   else \
25     false; \
26   fi; \
27 }
28 am__make_running_with_option = \
29   case $${target_option-} in \
30       ?) ;; \
31       *) echo "am__make_running_with_option: internal error: invalid" \
32               "target option '$${target_option-}' specified" >&2; \
33          exit 1;; \
34   esac; \
35   has_opt=no; \
36   sane_makeflags=$$MAKEFLAGS; \
37   if $(am__is_gnu_make); then \
38     sane_makeflags=$$MFLAGS; \
39   else \
40     case $$MAKEFLAGS in \
41       *\\[\ \   ]*) \
42         bs=\\; \
43         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
45     esac; \
46   fi; \
47   skip_next=no; \
48   strip_trailopt () \
49   { \
50     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
51   }; \
52   for flg in $$sane_makeflags; do \
53     test $$skip_next = yes && { skip_next=no; continue; }; \
54     case $$flg in \
55       *=*|--*) continue;; \
56         -*I) strip_trailopt 'I'; skip_next=yes;; \
57       -*I?*) strip_trailopt 'I';; \
58         -*O) strip_trailopt 'O'; skip_next=yes;; \
59       -*O?*) strip_trailopt 'O';; \
60         -*l) strip_trailopt 'l'; skip_next=yes;; \
61       -*l?*) strip_trailopt 'l';; \
62       -[dEDm]) skip_next=yes;; \
63       -[JT]) skip_next=yes;; \
64     esac; \
65     case $$flg in \
66       *$$target_option*) has_opt=yes; break;; \
67     esac; \
68   done; \
69   test $$has_opt = yes
70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72 pkgdatadir = $(datadir)/@PACKAGE@
73 pkgincludedir = $(includedir)/@PACKAGE@
74 pkglibdir = $(libdir)/@PACKAGE@
75 pkglibexecdir = $(libexecdir)/@PACKAGE@
76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
77 install_sh_DATA = $(install_sh) -c -m 644
78 install_sh_PROGRAM = $(install_sh) -c
79 install_sh_SCRIPT = $(install_sh) -c
80 INSTALL_HEADER = $(INSTALL_DATA)
81 transform = $(program_transform_name)
82 NORMAL_INSTALL = :
83 PRE_INSTALL = :
84 POST_INSTALL = :
85 NORMAL_UNINSTALL = :
86 PRE_UNINSTALL = :
87 POST_UNINSTALL = :
88 subdir = src/partitioning
89 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
90 am__aclocal_m4_deps = $(top_srcdir)/version.ac \
91         $(top_srcdir)/m4/progs.m4 \
92         $(top_srcdir)/m4/ax_compare_version.m4 \
93         $(top_srcdir)/m4/ac_check_docbook_xslt.m4 \
94         $(top_srcdir)/m4/ac_check_docbook_dtd.m4 \
95         $(top_srcdir)/m4/ac_check_takaofontdir.m4 \
96         $(top_srcdir)/configure.ac
97 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
98         $(ACLOCAL_M4)
99 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
100 mkinstalldirs = $(install_sh) -d
101 CONFIG_HEADER = $(top_builddir)/config.h
102 CONFIG_CLEAN_FILES =
103 CONFIG_CLEAN_VPATH_FILES =
104 AM_V_P = $(am__v_P_@AM_V@)
105 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
106 am__v_P_0 = false
107 am__v_P_1 = :
108 AM_V_GEN = $(am__v_GEN_@AM_V@)
109 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
110 am__v_GEN_0 = @echo "  GEN     " $@;
111 am__v_GEN_1 = 
112 AM_V_at = $(am__v_at_@AM_V@)
113 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
114 am__v_at_0 = @
115 am__v_at_1 = 
116 SOURCES =
117 DIST_SOURCES =
118 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
119         ctags-recursive dvi-recursive html-recursive info-recursive \
120         install-data-recursive install-dvi-recursive \
121         install-exec-recursive install-html-recursive \
122         install-info-recursive install-pdf-recursive \
123         install-ps-recursive install-recursive installcheck-recursive \
124         installdirs-recursive pdf-recursive ps-recursive \
125         tags-recursive uninstall-recursive
126 am__can_run_installinfo = \
127   case $$AM_UPDATE_INFO_DIR in \
128     n|no|NO) false;; \
129     *) (install-info --version) >/dev/null 2>&1;; \
130   esac
131 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
132   distclean-recursive maintainer-clean-recursive
133 am__recursive_targets = \
134   $(RECURSIVE_TARGETS) \
135   $(RECURSIVE_CLEAN_TARGETS) \
136   $(am__extra_recursive_targets)
137 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
138         distdir
139 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
140 # Read a list of newline-separated strings from the standard input,
141 # and print each of them once, without duplicates.  Input order is
142 # *not* preserved.
143 am__uniquify_input = $(AWK) '\
144   BEGIN { nonempty = 0; } \
145   { items[$$0] = 1; nonempty = 1; } \
146   END { if (nonempty) { for (i in items) print i; }; } \
147 '
148 # Make sure the list of sources is unique.  This is necessary because,
149 # e.g., the same source file might be shared among _SOURCES variables
150 # for different programs/libraries.
151 am__define_uniq_tagged_files = \
152   list='$(am__tagged_files)'; \
153   unique=`for i in $$list; do \
154     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
155   done | $(am__uniquify_input)`
156 ETAGS = etags
157 CTAGS = ctags
158 DIST_SUBDIRS = $(SUBDIRS)
159 am__DIST_COMMON = $(srcdir)/Makefile.in
160 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
161 am__relativize = \
162   dir0=`pwd`; \
163   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
164   sed_rest='s,^[^/]*/*,,'; \
165   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
166   sed_butlast='s,/*[^/]*$$,,'; \
167   while test -n "$$dir1"; do \
168     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
169     if test "$$first" != "."; then \
170       if test "$$first" = ".."; then \
171         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
172         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
173       else \
174         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
175         if test "$$first2" = "$$first"; then \
176           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
177         else \
178           dir2="../$$dir2"; \
179         fi; \
180         dir0="$$dir0"/"$$first"; \
181       fi; \
182     fi; \
183     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
184   done; \
185   reldir="$$dir2"
186 ACLOCAL = @ACLOCAL@
187 AMTAR = @AMTAR@
188 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
189 AUTOCONF = @AUTOCONF@
190 AUTOHEADER = @AUTOHEADER@
191 AUTOMAKE = @AUTOMAKE@
192 AWK = @AWK@
193 CC = @CC@
194 CCDEPMODE = @CCDEPMODE@
195 CFLAGS = @CFLAGS@
196 CPP = @CPP@
197 CPPFLAGS = @CPPFLAGS@
198 CTIE = @CTIE@
199 CYGPATH_W = @CYGPATH_W@
200 DEFS = @DEFS@
201 DEPDIR = @DEPDIR@
202 ECHO_C = @ECHO_C@
203 ECHO_N = @ECHO_N@
204 ECHO_T = @ECHO_T@
205 EGREP = @EGREP@
206 EXEEXT = @EXEEXT@
207 FOP = @FOP@
208 GREP = @GREP@
209 INSTALL = @INSTALL@
210 INSTALL_DATA = @INSTALL_DATA@
211 INSTALL_PROGRAM = @INSTALL_PROGRAM@
212 INSTALL_SCRIPT = @INSTALL_SCRIPT@
213 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
214 LDFLAGS = @LDFLAGS@
215 LIBOBJS = @LIBOBJS@
216 LIBS = @LIBS@
217 LTLIBOBJS = @LTLIBOBJS@
218 LYNX = @LYNX@
219 MAKEINFO = @MAKEINFO@
220 MKDIR_P = @MKDIR_P@
221 OBJEXT = @OBJEXT@
222 PACKAGE = @PACKAGE@
223 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
224 PACKAGE_NAME = @PACKAGE_NAME@
225 PACKAGE_STRING = @PACKAGE_STRING@
226 PACKAGE_TARNAME = @PACKAGE_TARNAME@
227 PACKAGE_URL = @PACKAGE_URL@
228 PACKAGE_VERSION = @PACKAGE_VERSION@
229 PATH_SEPARATOR = @PATH_SEPARATOR@
230 PDF = @PDF@
231 SET_MAKE = @SET_MAKE@
232 SHELL = @SHELL@
233 STRIP = @STRIP@
234 SVNVER = @SVNVER@
235 TAKAO = @TAKAO@
236 TAKAOGEXFILE = @TAKAOGEXFILE@
237 TAKAOGFILE = @TAKAOGFILE@
238 TAKAOGFONTDIR = @TAKAOGFONTDIR@
239 TAKAOMFILE = @TAKAOMFILE@
240 TAKAOMFONTDIR = @TAKAOMFONTDIR@
241 TIDY = @TIDY@
242 TXT = @TXT@
243 VERSION = @VERSION@
244 XMLLINT = @XMLLINT@
245 XSLTPROC = @XSLTPROC@
246 abs_bookdir = @abs_bookdir@
247 abs_builddir = @abs_builddir@
248 abs_srcdir = @abs_srcdir@
249 abs_top_builddir = @abs_top_builddir@
250 abs_top_srcdir = @abs_top_srcdir@
251 ac_ct_CC = @ac_ct_CC@
252 am__include = @am__include@
253 am__leading_dot = @am__leading_dot@
254 am__quote = @am__quote@
255 am__tar = @am__tar@
256 am__untar = @am__untar@
257 bindir = @bindir@
258 bookdir = @bookdir@
259 build_alias = @build_alias@
260 builddir = @builddir@
261 datadir = @datadir@
262 datarootdir = @datarootdir@
263 docdir = @docdir@
264 dvidir = @dvidir@
265 exec_prefix = @exec_prefix@
266 host_alias = @host_alias@
267 htmldir = @htmldir@
268 includedir = @includedir@
269 infodir = @infodir@
270 install_sh = @install_sh@
271 libdir = @libdir@
272 libexecdir = @libexecdir@
273 localedir = @localedir@
274 localstatedir = @localstatedir@
275 mandir = @mandir@
276 mkdir_p = @mkdir_p@
277 oldincludedir = @oldincludedir@
278 pdfdir = @pdfdir@
279 prefix = @prefix@
280 program_transform_name = @program_transform_name@
281 psdir = @psdir@
282 sbindir = @sbindir@
283 sharedstatedir = @sharedstatedir@
284 srcdir = @srcdir@
285 sysconfdir = @sysconfdir@
286 target_alias = @target_alias@
287 top_build_prefix = @top_build_prefix@
288 top_builddir = @top_builddir@
289 top_srcdir = @top_srcdir@
290 SUBDIRS = common mips ppc sparc
291 BOOKdir = @abs_bookdir@/partitioning
292 CHANGE_FILES = \
293         mips-chapter.ch       \
294         ppc-chapter.ch        \
295         ppc64-chapter.ch      \
296         sparc-chapter.ch      \
297         sparc64-chapter.ch    \
298         x86-chapter.ch
299
300 EXTRA_DIST = $(CHANGE_FILES)
301 srcs = $(CHANGE_FILES:.ch=.xml)
302 SUFFIXES = .ch .xml
303 all: all-recursive
304
305 .SUFFIXES:
306 .SUFFIXES: .ch .xml
307 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
308         @for dep in $?; do \
309           case '$(am__configure_deps)' in \
310             *$$dep*) \
311               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
312                 && { if test -f $@; then exit 0; else break; fi; }; \
313               exit 1;; \
314           esac; \
315         done; \
316         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/partitioning/Makefile'; \
317         $(am__cd) $(top_srcdir) && \
318           $(AUTOMAKE) --gnu src/partitioning/Makefile
319 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
320         @case '$?' in \
321           *config.status*) \
322             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
323           *) \
324             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
325             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
326         esac;
327
328 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
329         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
330
331 $(top_srcdir)/configure:  $(am__configure_deps)
332         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
333 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
334         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
335 $(am__aclocal_m4_deps):
336
337 # This directory's subdirectories are mostly independent; you can cd
338 # into them and run 'make' without going through this Makefile.
339 # To change the values of 'make' variables: instead of editing Makefiles,
340 # (1) if the variable is set in 'config.status', edit 'config.status'
341 #     (which will cause the Makefiles to be regenerated when you run 'make');
342 # (2) otherwise, pass the desired values on the 'make' command line.
343 $(am__recursive_targets):
344         @fail=; \
345         if $(am__make_keepgoing); then \
346           failcom='fail=yes'; \
347         else \
348           failcom='exit 1'; \
349         fi; \
350         dot_seen=no; \
351         target=`echo $@ | sed s/-recursive//`; \
352         case "$@" in \
353           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
354           *) list='$(SUBDIRS)' ;; \
355         esac; \
356         for subdir in $$list; do \
357           echo "Making $$target in $$subdir"; \
358           if test "$$subdir" = "."; then \
359             dot_seen=yes; \
360             local_target="$$target-am"; \
361           else \
362             local_target="$$target"; \
363           fi; \
364           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
365           || eval $$failcom; \
366         done; \
367         if test "$$dot_seen" = "no"; then \
368           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
369         fi; test -z "$$fail"
370
371 ID: $(am__tagged_files)
372         $(am__define_uniq_tagged_files); mkid -fID $$unique
373 tags: tags-recursive
374 TAGS: tags
375
376 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
377         set x; \
378         here=`pwd`; \
379         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
380           include_option=--etags-include; \
381           empty_fix=.; \
382         else \
383           include_option=--include; \
384           empty_fix=; \
385         fi; \
386         list='$(SUBDIRS)'; for subdir in $$list; do \
387           if test "$$subdir" = .; then :; else \
388             test ! -f $$subdir/TAGS || \
389               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
390           fi; \
391         done; \
392         $(am__define_uniq_tagged_files); \
393         shift; \
394         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
395           test -n "$$unique" || unique=$$empty_fix; \
396           if test $$# -gt 0; then \
397             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
398               "$$@" $$unique; \
399           else \
400             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
401               $$unique; \
402           fi; \
403         fi
404 ctags: ctags-recursive
405
406 CTAGS: ctags
407 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
408         $(am__define_uniq_tagged_files); \
409         test -z "$(CTAGS_ARGS)$$unique" \
410           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
411              $$unique
412
413 GTAGS:
414         here=`$(am__cd) $(top_builddir) && pwd` \
415           && $(am__cd) $(top_srcdir) \
416           && gtags -i $(GTAGS_ARGS) "$$here"
417 cscopelist: cscopelist-recursive
418
419 cscopelist-am: $(am__tagged_files)
420         list='$(am__tagged_files)'; \
421         case "$(srcdir)" in \
422           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
423           *) sdir=$(subdir)/$(srcdir) ;; \
424         esac; \
425         for i in $$list; do \
426           if test -f "$$i"; then \
427             echo "$(subdir)/$$i"; \
428           else \
429             echo "$$sdir/$$i"; \
430           fi; \
431         done >> $(top_builddir)/cscope.files
432
433 distclean-tags:
434         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
435
436 distdir: $(DISTFILES)
437         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
438         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
439         list='$(DISTFILES)'; \
440           dist_files=`for file in $$list; do echo $$file; done | \
441           sed -e "s|^$$srcdirstrip/||;t" \
442               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
443         case $$dist_files in \
444           */*) $(MKDIR_P) `echo "$$dist_files" | \
445                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
446                            sort -u` ;; \
447         esac; \
448         for file in $$dist_files; do \
449           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
450           if test -d $$d/$$file; then \
451             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
452             if test -d "$(distdir)/$$file"; then \
453               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
454             fi; \
455             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
456               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
457               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
458             fi; \
459             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
460           else \
461             test -f "$(distdir)/$$file" \
462             || cp -p $$d/$$file "$(distdir)/$$file" \
463             || exit 1; \
464           fi; \
465         done
466         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
467           if test "$$subdir" = .; then :; else \
468             $(am__make_dryrun) \
469               || test -d "$(distdir)/$$subdir" \
470               || $(MKDIR_P) "$(distdir)/$$subdir" \
471               || exit 1; \
472             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
473             $(am__relativize); \
474             new_distdir=$$reldir; \
475             dir1=$$subdir; dir2="$(top_distdir)"; \
476             $(am__relativize); \
477             new_top_distdir=$$reldir; \
478             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
479             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
480             ($(am__cd) $$subdir && \
481               $(MAKE) $(AM_MAKEFLAGS) \
482                 top_distdir="$$new_top_distdir" \
483                 distdir="$$new_distdir" \
484                 am__remove_distdir=: \
485                 am__skip_length_check=: \
486                 am__skip_mode_fix=: \
487                 distdir) \
488               || exit 1; \
489           fi; \
490         done
491 check-am: all-am
492 check: check-recursive
493 all-am: Makefile
494 installdirs: installdirs-recursive
495 installdirs-am:
496 install: install-recursive
497 install-exec: install-exec-recursive
498 install-data: install-data-recursive
499 uninstall: uninstall-recursive
500
501 install-am: all-am
502         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
503
504 installcheck: installcheck-recursive
505 install-strip:
506         if test -z '$(STRIP)'; then \
507           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
508             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
509               install; \
510         else \
511           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
512             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
513             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
514         fi
515 mostlyclean-generic:
516
517 clean-generic:
518
519 distclean-generic:
520         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
521         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
522
523 maintainer-clean-generic:
524         @echo "This command is intended for maintainers to use"
525         @echo "it deletes files that may require special tools to rebuild."
526 clean: clean-recursive
527
528 clean-am: clean-generic mostlyclean-am
529
530 distclean: distclean-recursive
531         -rm -f Makefile
532 distclean-am: clean-am distclean-generic distclean-tags
533
534 dvi: dvi-recursive
535
536 dvi-am:
537
538 html: html-recursive
539
540 html-am:
541
542 info: info-recursive
543
544 info-am:
545
546 install-data-am:
547
548 install-dvi: install-dvi-recursive
549
550 install-dvi-am:
551
552 install-exec-am:
553
554 install-html: install-html-recursive
555
556 install-html-am:
557
558 install-info: install-info-recursive
559
560 install-info-am:
561
562 install-man:
563
564 install-pdf: install-pdf-recursive
565
566 install-pdf-am:
567
568 install-ps: install-ps-recursive
569
570 install-ps-am:
571
572 installcheck-am:
573
574 maintainer-clean: maintainer-clean-recursive
575         -rm -f Makefile
576 maintainer-clean-am: distclean-am maintainer-clean-generic
577
578 mostlyclean: mostlyclean-recursive
579
580 mostlyclean-am: mostlyclean-generic
581
582 pdf: pdf-recursive
583
584 pdf-am:
585
586 ps: ps-recursive
587
588 ps-am:
589
590 uninstall-am:
591
592 .MAKE: $(am__recursive_targets) install-am install-strip
593
594 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
595         check-am clean clean-generic cscopelist-am ctags ctags-am \
596         distclean distclean-generic distclean-tags distdir dvi dvi-am \
597         html html-am info info-am install install-am install-data \
598         install-data-am install-dvi install-dvi-am install-exec \
599         install-exec-am install-html install-html-am install-info \
600         install-info-am install-man install-pdf install-pdf-am \
601         install-ps install-ps-am install-strip installcheck \
602         installcheck-am installdirs installdirs-am maintainer-clean \
603         maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
604         pdf-am ps ps-am tags tags-am uninstall uninstall-am
605
606 .PRECIOUS: Makefile
607
608 .ch.xml:
609         $(top_builddir)/$(CTIE) -m $@ $(BOOKdir)/$@ $(srcdir)/$*.ch >/dev/null
610
611 all: ctie $(srcs)
612
613 ctie:
614         @$(MAKE) -C $(top_builddir)/$@ $@ >/dev/null
615
616 $(srcs): $(BOOKdir)/$@ $(srcdir)/$(@:.xml=.ch)
617
618 # Tell versions [3.59,3.63) of GNU make to not export all variables.
619 # Otherwise a system limit (for SysV at least) may be exceeded.
620 .NOEXPORT: