X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=libstdc%2B%2B-v3%2FMakefile.am;h=75c799d0a7283570901f38e8198d689e06fb84b6;hb=804d7df8defe5ad76fca01bc2a1abb76983766a0;hp=783c179e667ffacb037e5143c3c35fcf5d2cb580;hpb=a608f5bcc4ae30b1ab648a475780a86657f9cb7c;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/libstdc++-v3/Makefile.am b/libstdc++-v3/Makefile.am
index 783c179e667..75c799d0a72 100644
--- a/libstdc++-v3/Makefile.am
+++ b/libstdc++-v3/Makefile.am
@@ -1,6 +1,7 @@
 ## Makefile for the toplevel directory of the GNU C++ Standard library.
 ##
-## Copyright (C) 1997,1998, 1999, 2000 Free Software Foundation, Inc.
+## Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003
+## Free Software Foundation, Inc.
 ##
 ## This file is part of the libstdc++ version 3 distribution.
 ## Process this file with automake to produce Makefile.in.
@@ -21,52 +22,44 @@
 ## Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
 ## USA.
 
-AUTOMAKE_OPTIONS = 1.3 cygnus
-MAINT_CHARSET = latin1
+include $(top_srcdir)/fragment.am
 
-# This helps subvert libstdcxx_interface, as calculated by devo/config.if
-# Needed so that g++ can find the correct include subdir automatically.
-INTERFACE = v3
-gxx_include_dir=$(includedir)/g++
+if GLIBCXX_HOSTED
+  # Possibly libmath as well...
+  hosted_source = src po
+endif
+## Keep this list sync'd with acinclude.m4:GLIBCXX_CONFIGURE.
+SUBDIRS = include libmath libsupc++ $(hosted_source) testsuite
 
-SUBDIRS = libio libmath libsupc++ src
+# These rules are messy, but are hella worth it.
+doxygen:
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
+	  ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+	            --mode=user $${srcdir} $${builddir})
 
+doxygen-maint:
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
+	  ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+	            --mode=maint $${srcdir} $${builddir})
 
-# Compile flags that should be constant throughout the build, both for
-# SUBDIRS and for libstdc++-v3 in general.
-# Optimization flags that are probably a good idea for thrill-seekers. Just
-# uncomment the lines below and make, everything else is ready to go... 
-# OPTIMIZE_CXXFLAGS = -O3 -fstrict-aliasing -fvtable-gc 
-OPTIMIZE_CXXFLAGS = 
+doxygen-man:
+	-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+	  builddir=`${PWD_COMMAND}`; \
+	  ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
+	            --mode=man $${srcdir} $${builddir})
 
-# Warning flags to use.
-WARN_CXXFLAGS = \
-	-Wall -Wno-format -W -Wwrite-strings -Winline \
-	$(WERROR) @WFMT_FLAGS@
+.PHONY: doxygen doxygen-maint doxygen-man
 
-# These bits are all figured out from configure. Look in acinclude.m4
-# or configure.in to see how they are set.
-# NB: DEBUGFLAGS have to be at the end so that -O2 can be overridden.
-CONFIG_CXXFLAGS = \
-	@CPU_FLAGS@ @EXTRA_CXX_FLAGS@ \
-	@SECTION_FLAGS@ @CSHADOWFLAGS@ @DEBUG_FLAGS@ 
-
-
-# Use $(blddir) instead of $(top_builddir) for arguments to "mkcheck"
-# because then the paths will be full pathnames, not relative
-# pathnames. (-Wl,--rpath seems to like this better.)
-check:  $(top_builddir)/mkcheck
-	chmod +x  $(top_builddir)/mkcheck
-	$(top_builddir)/mkcheck 0 `pwd` $(top_srcdir)
-
-check-install: $(top_builddir)/mkcheck
-	chmod +x  $(top_builddir)/mkcheck
-	$(top_builddir)/mkcheck 1 `pwd` $(top_srcdir) $(prefix)
+# Handy forwarding targets.
+check-%:
+	cd testsuite && $(MAKE) $@
 
 # Multilib support.
 MAKEOVERRIDES=
 
-# Multilib variables.
+# Multilib support variables.
 MULTISRCTOP =
 MULTIBUILDTOP =
 MULTIDIRS =
@@ -74,19 +67,19 @@ MULTISUBDIR =
 MULTIDO = true
 MULTICLEAN = true
 
-# Multilib Makefile bits.
+# Multilib support.
 .PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
 	maintainer-clean-multi
 
-all-am: all-multi
-install-am: install-multi
-mostlyclean-am: mostlyclean-multi
-clean-am: clean-multi
-distclean-am: distclean-multi
-maintainer-clean-am: maintainer-clean-multi
+all-recursive: all-multi
+install-recursive: install-multi
+mostlyclean-recursive: mostlyclean-multi
+clean-recursive: clean-multi
+distclean-recursive: distclean-multi
+maintainer-clean-recursive: maintainer-clean-multi
 
 all-multi:
-	$(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
+	: $(MAKE) ; exec $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
 install-multi:
 	$(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
 mostlyclean-multi:
@@ -125,8 +118,6 @@ AM_MAKEFLAGS = \
 	"PICFLAG=$(PICFLAG)" \
 	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 	"SHELL=$(SHELL)" \
-	"EXPECT=$(EXPECT)" \
-	"RUNTEST=$(RUNTEST)" \
 	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 	"exec_prefix=$(exec_prefix)" \
 	"infodir=$(infodir)" \
@@ -134,10 +125,9 @@ AM_MAKEFLAGS = \
 	"includedir=$(includedir)" \
 	"prefix=$(prefix)" \
 	"tooldir=$(tooldir)" \
+	"gxx_include_dir=$(gxx_include_dir)" \
 	"AR=$(AR)" \
 	"AS=$(AS)" \
-	"CC=$(CC)" \
-	"CXX=$(CXX)" \
 	"LD=$(LD)" \
 	"LIBCFLAGS=$(LIBCFLAGS)" \
 	"PICFLAG=$(PICFLAG)" \
@@ -146,13 +136,7 @@ AM_MAKEFLAGS = \
 	"NM_FOR_BUILD=$(NM_FOR_BUILD)" \
 	"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 	"DESTDIR=$(DESTDIR)" \
-	"WERROR=$(WERROR)" \
-	"OPTIMIZE_CXXFLAGS=$(OPTIMIZE_CXXFLAGS)" \
-	"WARN_CXXFLAGS=$(WARN_CXXFLAGS)" \
-	"CONFIG_CXXFLAGS=$(CONFIG_CXXFLAGS)" 
-
-
-
-
-
+	"WERROR=$(WERROR)"
 
+# Subdir rules rely on $(FLAGS_TO_PASS)
+FLAGS_TO_PASS = $(AM_MAKEFLAGS)