X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=configure.in;h=4ec0d21a9e12d2d88ecaa2d134ce70a44c522ee6;hb=4bd2b877e855cab0c99a0d9ca9881e3360b3b71b;hp=1b60f7d49db09d06a005e2320a92fec1e77ecbb5;hpb=49fbf4b925552657ef9fe53d8382dfc5d9723ac5;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/configure.in b/configure.in
index 1b60f7d49db..4ec0d21a9e1 100644
--- a/configure.in
+++ b/configure.in
@@ -18,6 +18,8 @@
 ##############################################################################
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
 
+sinclude(config/acx.m4)
+
 AC_INIT(move-if-change)
 AC_PREREQ(2.13)
 AC_CANONICAL_SYSTEM
@@ -25,8 +27,8 @@ AC_ARG_PROGRAM
 
 # Get 'install' or 'install-sh' and its variants.
 AC_PROG_INSTALL
-
-sinclude(config/acx.m4)
+ACX_PROG_LN
+AC_PROG_LN_S
 
 ### we might need to use some other shell than /bin/sh for running subshells
 ### If we are on Windows, search for the shell.  This will permit people
@@ -126,7 +128,7 @@ fi
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib libbanshee"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib libbanshee libcpp"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -583,8 +585,13 @@ case "${target}" in
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
     noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
-    # always build newlib.
-    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    # always build newlib if winsup directory is present.
+    if test -d "$srcdir/winsup"
+    then
+      skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    else
+      echo "Warning: winsup is missing so newlib can't be built."
+    fi
 
     # Can't build gdb for Cygwin if not native.
     case "${host}" in
@@ -1716,31 +1723,55 @@ case "$enable_gdbtk" in
     ;;
 esac
 
-# Create the 'maybe dependencies'.  This uses a temporary file.
+# Strip out unwanted targets.
 
 # While at that, we remove Makefiles if we were started for recursive
 # configuration, so that the top-level Makefile reconfigures them,
 # like we used to do when configure itself was recursive.
-rm -f maybedep.tmp
-echo '# maybedep.tmp' > maybedep.tmp
 
-# Make-targets which may need maybe dependencies.
-mts="configure all install check clean distclean dvi info install-info"
-mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
+# Loop over modules.  $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses.  That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later.  In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+AC_ARG_ENABLE([bootstrap],
+[  --enable-bootstrap     Enable bootstrapping [no]],,
+enable_bootstrap=no)
+if test -d ${srcdir}/gcc; then
+  case "$host:$target:$enable_bootstrap" in
+    $build:$build:yes | *:no) ;;
+    *:yes) AC_MSG_ERROR([cannot bootstrap a cross-compiler]) ;;
+    *) AC_MSG_ERROR([invalid option for --enable-bootstrap]) ;;
+  esac
+else
+  if test $enable_bootstrap = yes; then
+    AC_MSG_ERROR([cannot bootstrap without a compiler])
+  fi
+fi
+
+case "$enable_bootstrap" in
+  yes)
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  no)
+    default_target=all
+    bootstrap_suffix=no-bootstrap ;;
+esac
+AC_SUBST(default_target)
 
-# Loop over modules and make-targets.
 for module in ${build_modules} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${build_subdir}/${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    case ${mt} in
-      install) ;; # No installing build modules.
-      *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
-    esac
-  done
+  extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
 done
 for module in ${configdirs} ; do
   if test -z "${no_recursion}" \
@@ -1748,9 +1779,11 @@ for module in ${configdirs} ; do
     echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
     rm -f ${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
-  done
+  extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
 done
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
@@ -1758,12 +1791,15 @@ for module in ${target_configdirs} ; do
     echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${target_subdir}/${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
-  done
+  extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
 done
-maybe_dependencies=maybedep.tmp
-AC_SUBST_FILE(maybe_dependencies)
+
+extrasub="$extrasub
+/^@if /,/^@endif /d"
 
 # Create the serialization dependencies.  This uses a temporary file.
 
@@ -2035,7 +2071,7 @@ elif test -d ${srcdir}/gcc; then
 elif test "$host" = "$target"; then
   GFORTRAN_FOR_TARGET='gfortran'
 else
-  GFORTRAN_FOR_TARGET=`echo gfortran | sed -e 's/x/x/' ${program_transform_name}`
+  GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
 fi
 case $GFORTRAN_FOR_TARGET in
 *' $(FLAGS_FOR_TARGET)') ;;
@@ -2250,6 +2286,36 @@ case $build in
 esac
 AC_SUBST(stage1_cflags)
 
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stage-prev for stage(N-1).  In case this is not
+# possible, however, we can resort to mv.
+AC_CACHE_CHECK([if symbolic links between directories work],
+[gcc_cv_prog_ln_s_dir],
+[if test "${LN_S}" = "ln -s" \
+   && mkdir confdir.s1 \
+   && ln -s confdir.s1 confdir.s2 \
+   && echo timestamp1 > confdir.s1/conftest.1 \
+   && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+   && echo timestamp2 > confdir.s2/conftest.2 \
+   && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+   && rm -f confdir.s2; then
+  gcc_cv_prog_ln_s_dir=yes
+else
+  gcc_cv_prog_ln_s_dir=yes
+fi
+rm -rf confdir.s1 confdir.s2])
+
+case ${gcc_cv_prog_ln_s_dir} in
+  yes)
+    CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+    UNDO_LINK_TO_DIR='rm -f $$1' ;;
+  *)
+    CREATE_LINK_TO_DIR='mv $$1 $$2'
+    UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+AC_SUBST(CREATE_LINK_TO_DIR)
+AC_SUBST(UNDO_LINK_TO_DIR)
+
 # Enable -Werror in bootstrap stage2 and later.
 # Change the default to "no" on release branches.
 AC_ARG_ENABLE(werror,