X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=configure.ac;h=e6e91254c41e216b7138cc62d35bd43880e17e99;hb=4ebdb4cb1be19b4bfcd0505950db525c73f4e400;hp=626bb4e10f1c23796e1d3b4bff4af92237f62432;hpb=1e369e5fc4d40bf8e75569a61ae5e841829b6036;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/configure.ac b/configure.ac
index 626bb4e10f1..e6e91254c41 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,5 +1,5 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
 #   Free Software Foundation, Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
@@ -89,42 +89,6 @@ AC_PROG_LN_S
 AC_PROG_SED
 AC_PROG_AWK
 
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell.  This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL.  This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
-  if test x${CONFIG_SHELL} = x ; then
-    if test ! -f /bin/sh ; then
-      if test x${SHELL} != x && test -f ${SHELL} ; then
-	CONFIG_SHELL=${SHELL}
-	export CONFIG_SHELL
-      else
-	for prog in sh sh.exe bash bash.exe; do
-	  IFS="${IFS=	}"; save_ifs="$IFS"; IFS="${IFS}:"
-	  for dir in $PATH; do
-	    test -z "$dir" && dir=.
-	    if test -f $dir/$prog; then
-	      CONFIG_SHELL=$dir/$prog
-	      export CONFIG_SHELL
-	      break
-	    fi
-	  done
-	  IFS="$save_ifs"
-	  test -n "${CONFIG_SHELL}" && break
-	done
-      fi
-    fi
-  fi
-  ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
 
 # We pass INSTALL explicitly to sub-makes.  Make sure that it is not
@@ -207,10 +171,9 @@ target_libraries="target-libgcc \
 # run only in the target environment
 #
 # note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list.  those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
 #
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-examples target-gperf target-rda"
 
 ################################################################################
 
@@ -296,17 +259,12 @@ case ${with_x} in
   *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
 esac
 
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.  
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
 # Remove these if host=target.
 cross_only="target-libgloss target-newlib target-opcodes"
 
 case $is_cross_compiler in
   no) skipdirs="${skipdirs} ${cross_only}" ;;
-  yes) skipdirs="${skipdirs} ${native_only}" ;;
 esac
 
 # If both --with-headers and --with-libs are specified, default to
@@ -327,20 +285,25 @@ esac
 # Handle --enable-gold, --enable-ld.
 # --disable-gold [--enable-ld]
 #     Build only ld.  Default option.
-# --enable-gold[=default] [--enable-ld]
+# --enable-gold [--enable-ld]
+#     Build both gold and ld.  Install gold as "ld.gold", install ld
+#     as "ld.bfd" and "ld".
+# --enable-gold=default [--enable-ld]
 #     Build both gold and ld.  Install gold as "ld.gold" and "ld",
 #     install ld as "ld.bfd".
 # --enable-gold[=default] --disable-ld
 #     Build only gold, which is then installed as both "ld.gold" and "ld".
 # --enable-gold --enable-ld=default
-#     Build both gold (installed as "gold") and ld (installed as "ld").
+#     Build both gold (installed as "ld.gold") and ld (installed as "ld"
+#     and ld.bfd).
 #     In other words, ld is default
 # --enable-gold=default --enable-ld=default
 #     Error.
 
 default_ld=
 AC_ARG_ENABLE(gold,
-[[  --enable-gold[=ARG]     build gold [ARG={default,yes,no}]]],
+[AS_HELP_STRING([[--enable-gold[=ARG]]],
+		[build gold @<:@ARG={default,yes,no}@:>@])],
 ENABLE_GOLD=$enableval,
 ENABLE_GOLD=no)
 case "${ENABLE_GOLD}" in
@@ -350,7 +313,8 @@ case "${ENABLE_GOLD}" in
     case "${target}" in
       *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
       | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
-      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+      | *-*-solaris2* | *-*-nto*)
         case "${target}" in
           *-*-linux*aout* | *-*-linux*oldld*)
             ;;
@@ -381,13 +345,14 @@ case "${ENABLE_GOLD}" in
 esac
 
 AC_ARG_ENABLE(ld,
-[[  --enable-ld[=ARG]     build ld [ARG={default,yes,no}]]],
+[AS_HELP_STRING([[--enable-ld[=ARG]]],
+		[build ld @<:@ARG={default,yes,no}@:>@])],
 ENABLE_LD=$enableval,
 ENABLE_LD=yes)
 
 case "${ENABLE_LD}" in
   default)
-    if test x${default_ld} != xgold; then
+    if test x${default_ld} != x; then
       AC_MSG_ERROR([either gold or ld can be the default ld])
     fi
     ;;
@@ -420,42 +385,35 @@ unsupported_languages=
 # exist yet.
 
 case "${host}" in
-  hppa*64*-*-*)
-    noconfigdirs="$noconfigdirs byacc"
-    ;;
-  i[[3456789]]86-*-vsta)
-    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
-    ;;
-  i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
-    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[[3456789]]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb"
-    ;;
-  *-*-cygwin*)
-    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
-    ;;
-  *-*-netbsd*)
-    noconfigdirs="$noconfigdirs rcs"
-    ;;
-  ppc*-*-pe)
-    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
-    ;;
-  powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
+  i[[3456789]]86-*-msdosdjgpp*)
+    noconfigdirs="$noconfigdirs tcl tk itcl"
     ;;
 esac
 
 
+AC_ARG_ENABLE(libquadmath,
+AS_HELP_STRING([--disable-libquadmath],
+  [do not build libquadmath directory]),
+ENABLE_LIBQUADMATH=$enableval,
+ENABLE_LIBQUADMATH=yes)
+if test "${ENABLE_LIBQUADMATH}" = "no" ; then
+  noconfigdirs="$noconfigdirs target-libquadmath"
+fi
+
+
+AC_ARG_ENABLE(libquadmath-support,
+AS_HELP_STRING([--disable-libquadmath-support],
+  [disable libquadmath support for Fortran]),
+ENABLE_LIBQUADMATH_SUPPORT=$enableval,
+ENABLE_LIBQUADMATH_SUPPORT=yes)
+enable_libquadmath_support=
+if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then
+  enable_libquadmath_support=no
+fi
+
+
 AC_ARG_ENABLE(libada,
-[  --enable-libada         build libada directory],
+[AS_HELP_STRING([--enable-libada], [build libada directory])],
 ENABLE_LIBADA=$enableval,
 ENABLE_LIBADA=yes)
 if test "${ENABLE_LIBADA}" != "yes" ; then
@@ -463,7 +421,7 @@ if test "${ENABLE_LIBADA}" != "yes" ; then
 fi
 
 AC_ARG_ENABLE(libssp,
-[  --enable-libssp         build libssp directory],
+[AS_HELP_STRING([--enable-libssp], [build libssp directory])],
 ENABLE_LIBSSP=$enableval,
 ENABLE_LIBSSP=yes)
 
@@ -481,6 +439,9 @@ no)
   # Make sure we get it printed in the list of not supported target libs.
   # Don't disable libffi, though, other languages use it.
   noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`"
+  # Clear libgcj_saved so that even if java is enabled libffi won't be
+  # built.
+  libgcj_saved=
   ;;
 esac
 
@@ -507,9 +468,9 @@ if test x$enable_libgomp = x ; then
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
 	;;
-    *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+    *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
 	;;
-    *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+    *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
 	;;
     *-*-darwin* | *-*-aix*)
 	;;
@@ -519,12 +480,91 @@ if test x$enable_libgomp = x ; then
     esac
 fi
 
+# Disable libssp for some systems.
+case "${target}" in
+  avr-*-*)
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+  powerpc-*-aix* | rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+esac
+
+# Disable target libiberty for some systems.
+case "${target}" in
+  *-*-kaos*)
+    # Remove unsupported stuff on all kaOS configurations.
+    skipdirs="target-libiberty"
+    ;;
+  *-*-netbsd*)
+    # Skip some stuff on all NetBSD configurations.
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-rtems*)
+    skipdirs="${skipdirs} target-libiberty"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  arm*-*-symbianelf*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  picochip-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  mips*-sde-elf*)
+    skipdirs="$skipdirs target-libiberty"
+    ;;
+  ip2k-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+  *-*-vxworks*)
+    # VxWorks uses the Dinkumware C++ library.
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+  arm*-wince-pe*)
+    # the C++ libraries don't build on top of CE's C libraries
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+  mmix-*-*)
+    # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+    unsupported_languages="$unsupported_languages fortran"
+    ;;
+esac
+
 # Default libgloss CPU subdirectory.
 libgloss_dir="$target_cpu"
 
 case "${target}" in
   *-*-chorusos)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
@@ -543,8 +583,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs sim target-rda"
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+  *-*-dragonfly*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -565,14 +605,11 @@ case "${target}" in
     ;;
   *-*-kaos*)
     # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
-    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
-    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-netbsd*)
     # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
 
     # Skip some stuff that's unsupported on some NetBSD configurations.
     case "${target}" in
@@ -584,27 +621,26 @@ case "${target}" in
     esac
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   *-*-rtems*)
-    skipdirs="${skipdirs} target-libiberty"
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
-    # newlib is not 64 bit ready.  I'm not sure about fileutils.
+    # newlib is not 64 bit ready.
     # gas doesn't generate exception information.
-    noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
@@ -625,74 +661,48 @@ case "${target}" in
     ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs ${libgcj}"
-    noconfigdirs="$noconfigdirs target-examples"
-    noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
-    noconfigdirs="$noconfigdirs expect dejagnu"
-    # the C++ libraries don't build on top of CE's C libraries
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
     noconfigdirs="$noconfigdirs target-newlib"
-    case "${host}" in
-      *-*-cygwin*) ;; # keep gdb and readline
-      *) noconfigdirs="$noconfigdirs gdb readline"
-	 ;;
-    esac
     libgloss_dir=wince
     ;;
   arc-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  arm-semi-aof )
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  arm-*-coff | strongarm-*-coff | xscale-*-coff)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+  arm-*-coff)
     libgloss_dir=arm
     ;;
-  arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
-    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+  arm-*-elf* | arm*-*-eabi* )
+    noconfigdirs="$noconfigdirs target-libffi"
     libgloss_dir=arm
     ;;
   arm*-*-linux-gnueabi)
-    noconfigdirs="$noconfigdirs target-qthreads"
     case ${with_newlib} in
       no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     esac
     libgloss_dir=arm
     ;;
   arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=arm
     ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  thumb-*-coff)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-elf)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-pe)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
   arm-*-riscix*)
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   bfin-*-*)
     unsupported_languages="$unsupported_languages java"
-    noconfigdirs="$noconfigdirs target-boehm-gc gdb"
-    if test x${is_cross_compiler} != xno ; then
-      target_configdirs="${target_configdirs} target-bsp target-cygmon"
-    fi
+    noconfigdirs="$noconfigdirs target-boehm-gc"
     ;;
   c4x-*-* | tic4x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  c54x*-*-* | tic54x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+  tic54x-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss gdb"
     ;;
   cr16-*-*)
     noconfigdirs="$noconfigdirs ${libgcj} gdb"
@@ -700,30 +710,18 @@ case "${target}" in
   cris-*-* | crisv32-*-*)
     unsupported_languages="$unsupported_languages java"
     case "${target}" in
-      *-*-aout)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
-      *-*-elf)
-	noconfigdirs="$noconfigdirs target-boehm-gc";;
       *-*-linux*)
 	noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
-      *)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+      *) # See PR46792 regarding target-libffi.
+	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
     esac
     libgloss_dir=cris
     ;;
-  crx-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
-    ;;
   d10v-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
-  ep9312-*-elf | ep9312-*-coff)
-    libgloss_dir=arm
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   fr30-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj} gdb"
@@ -739,17 +737,17 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   hppa1.1-*-osf* | hppa1.1-*-bsd* )
     ;;
-  hppa*64*-*-linux* | parisc*64*-*-linux*)
+  hppa*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
     # the kernel only at this point and has no libc, and thus no
     # headers, crt*.o, etc., all of which are needed by these.
     noconfigdirs="$noconfigdirs target-zlib"
     ;;
-  parisc*-*-linux* | hppa*-*-linux*)
+  hppa*-*-linux*)
     ;;
   hppa*-*-*elf* | \
   hppa*-*-lites* | \
@@ -758,7 +756,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   hppa*-hp-hpux11*)
-    noconfigdirs="$noconfigdirs ld shellutils"
+    noconfigdirs="$noconfigdirs ld"
     ;;
   hppa*-*-pro*)
     libgloss_dir=pa
@@ -766,37 +764,28 @@ case "${target}" in
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
-    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+    noconfigdirs="$noconfigdirs ld ${libgcj}"
     ;;
   i960-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
-    noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+    noconfigdirs="$noconfigdirs readline libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
-    # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+    # No ld support yet.
+    noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
     ;;
   ia64*-*-*vms*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
-    ;;
-  i370-*-opened*)
+    noconfigdirs="$noconfigdirs ${libgcj} readline libgui itcl gdb ld"
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=i386
     ;;
   i[[3456789]]86-*-linux*)
-    # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
-    # not build java stuff by default.
-    case "${target}" in
-      *-*-*libc1*)
-	noconfigdirs="$noconfigdirs ${libgcj}";;
-    esac
-
     # This section makes it possible to build newlib natively on linux.
     # If we are using a cross compiler then don't configure newlib.
     if test x${is_cross_compiler} != xno ; then
@@ -809,18 +798,18 @@ case "${target}" in
     # 'target-newlib' will appear in skipdirs.
     ;;
   i[[3456789]]86-w64-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   i[[3456789]]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+    noconfigdirs="$noconfigdirs target-libgloss"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup/cygwin"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -828,28 +817,27 @@ case "${target}" in
       echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
     ;;
-  i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
-  i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+  i[[3456789]]86-*-interix* )
     ;;
   i[[3456789]]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   i[[3456789]]86-*-sco*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   i[[3456789]]86-*-solaris2*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-sysv4*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   i[[3456789]]86-*-rdos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
@@ -858,53 +846,38 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     libgloss_dir=m68hc11
     ;;
   m68k-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  m68k-*-coff*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   m68*-*-* | fido-*-*)
     libgloss_dir=m68k
     ;;
-  mcore-*-pe*)
-  # The EPOC C++ environment does not support exceptions or rtti,
-  # and so building libstdc++-v3 tends not to always work.
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
-    ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
-    unsupported_languages="$unsupported_languages fortran java"
-    ;;
-  mn10200-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  mn10300-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb"
+    unsupported_languages="$unsupported_languages java"
     ;;
   mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
     ;;
-  powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+  powerpc*-*-winnt* | powerpc*-*-pe*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
     libgloss_dir=rs6000
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   powerpc-*-eabi)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -917,19 +890,18 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   m68k-apollo-*)
-    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
     ;;
   microblaze*)
-    noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   mips*-sde-elf*)
-    skipdirs="$skipdirs target-libiberty"
     noconfigdirs="$noconfigdirs ${libgcj}"
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
@@ -937,7 +909,7 @@ case "${target}" in
     libgloss_dir=mips
     ;;
   mips*-*-irix5*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-irix6*)
     # Linking libjava exceeds command-line length limits on at least
@@ -947,7 +919,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -956,16 +928,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
     libgloss_dir=mips
     ;;
-  romp-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-    ;;
   sh-*-* | sh64-*-*)
-    case "${host}" in
-      i[[3456789]]86-*-vsta) ;; # don't add gprof back in
-      i[[3456789]]86-*-go32*) ;; # don't add gprof back in
-      i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
-      *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
-    esac
     case "${target}" in
       sh*-*-elf)
          noconfigdirs="$noconfigdirs ${libgcj}" ;;
@@ -984,43 +947,26 @@ case "${target}" in
     libgloss_dir=sparc
     ;;
   sparclite-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=sparc
     ;;
   sparc-*-sunos4*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
     if test x${is_cross_compiler} != xno ; then
            noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     else
            use_gnu_ld=no
     fi
     ;;
-  sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
   tic6x-*-*)
     noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
     ;;
   v810-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
-    ;;
-  v850*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  vax-*-vms)
-    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
     ;;
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
-  xtensa*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  ip2k-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
-    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
@@ -1040,111 +986,9 @@ case "${noconfigdirs}" in
 esac
 
 # Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
 host_makefile_frag=/dev/null
 if test -d ${srcdir}/config ; then
 case "${host}" in
-  m68k-hp-hpux*)
-    # Avoid "too much defining" errors from HPUX compiler.
-    tentative_cc="cc -Wp,-H256000"
-    # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
-    # If it's HP/UX ar, this should be harmless.
-    RANLIB="ar ts"
-    ;;
-  m68k-apollo-sysv*)
-    tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
-    ;;
-  m68k-apollo-bsd*)
-    #None of the Apollo compilers can compile gas or binutils.  The preprocessor
-    # chokes on bfd, the compiler won't let you assign integers to enums, and
-    # other problems.  Defining CC to gcc is a questionable way to say "don't use
-    # the apollo compiler" (the preferred version of GCC could be called cc,
-    # or whatever), but I'm not sure leaving CC as cc is any better...
-    #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
-    # Used to have BISON=yacc.
-    tentative_cc=gcc
-    ;;
-  m88k-dg-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    ;;
-  m88k-harris-cxux*)
-    # Under CX/UX, we want to tell the compiler to use ANSI mode.
-    tentative_cc="cc -Xa"
-    host_makefile_frag="config/mh-cxux"
-    ;;
-  m88k-motorola-sysv*)
-    ;;
-  mips*-dec-ultrix*)
-    tentative_cc="cc -Wf,-XNg1000"
-    host_makefile_frag="config/mh-decstation"
-    ;;
-  mips*-nec-sysv4*)
-    # The C compiler on NEC MIPS SVR4 needs bigger tables.
-    tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
-    host_makefile_frag="config/mh-necv4"
-    ;;
-  mips*-sgi-irix4*)
-    # Tell compiler to use K&R C.  We can't compile under the SGI Ansi
-    # environment.  Also bump switch table size so that cp-parse will
-    # compile.  Bump string length limit so linker builds.
-    tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
-    ;;
-  mips*-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  mips*-*-sysv*)
-    # This is for a MIPS running RISC/os 4.52C.
-
-    # This is needed for GDB, but needs to be in the top-level make because
-    # if a library is compiled with the bsd headers and gets linked with the
-    # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
-    # a different size).
-    # ptrace(2) apparently has problems in the BSD environment.  No workaround is
-    # known except to select the sysv environment.  Could we use /proc instead?
-    # These "sysv environments" and "bsd environments" often end up being a pain.
-    #
-    # This is not part of CFLAGS because perhaps not all C compilers have this
-    # option.
-    tentative_cc="cc -systype sysv"
-    ;;
-  i370-ibm-opened*)
-    tentative_cc="c89"
-    ;;
-  i[[3456789]]86-*-sysv5*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[[3456789]]86-*-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    host_makefile_frag="config/mh-dgux386"
-    ;;
-  i[[3456789]]86-ncr-sysv4.3*)
-    # The MetaWare compiler will generate a copyright message unless you
-    # turn it off by adding the -Hnocopyr flag.
-    tentative_cc="cc -Hnocopyr"
-    ;;
-  i[[3456789]]86-ncr-sysv4*)
-    # for an NCR 3000 (i486/SVR4) system.
-    # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
-    # This compiler not only emits obnoxious copyright messages every time
-    # you run it, but it chokes and dies on a whole bunch of GNU source
-    # files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
-    tentative_cc="/usr/ccs/ATT/cc"
-    host_makefile_frag="config/mh-ncr3000"
-    ;;
-  i[[3456789]]86-*-sco3.2v5*)
-    ;;
-  i[[3456789]]86-*-sco*)
-    # The native C compiler botches some simple uses of const.  Unfortunately,
-    # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
-    tentative_cc="cc -Dconst="
-    host_makefile_frag="config/mh-sco"
-    ;;
-  i[[3456789]]86-*-udk*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[[3456789]]86-*-solaris2*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
   i[[3456789]]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
@@ -1158,37 +1002,15 @@ case "${host}" in
   *-interix*)
     host_makefile_frag="config/mh-interix"
     ;;
-  vax-*-ultrix2*)
-    # The old BSD pcc isn't up to compiling parts of gdb so use gcc
-    tentative_cc=gcc
-    ;;
-  *-*-solaris2*)
-    host_makefile_frag="config/mh-solaris"
-    ;;
-  m68k-sun-sunos*)
-    # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
-    # without overflowing the jump tables (-J says to use a 32 bit table)
-    tentative_cc="cc -J"
-    ;;
   hppa*-hp-hpux10*)
-    tentative_cc="cc -Wp,-H256000"
     host_makefile_frag="config/mh-pa-hpux10"
     ;;
-  hppa*-hp-hpux* | hppa*-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
+  hppa*-hp-hpux*)
     host_makefile_frag="config/mh-pa"
     ;;
   hppa*-*)	
     host_makefile_frag="config/mh-pa"
     ;;
-  *-hp-hpux* | *-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
-    ;;
-  rs6000-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/usr/cygnus/progressive/bin/gcc"
-    host_makefile_frag="config/mh-lynxrs6k"
-    ;;
   *-*-darwin*)
     host_makefile_frag="config/mh-darwin"
     ;;
@@ -1198,40 +1020,9 @@ case "${host}" in
   rs6000-*-aix*)
     host_makefile_frag="config/mh-ppc-aix"
     ;;
-  *-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/bin/gcc"
-    ;;
-  *-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  # This is placed last to prevent interfering with the cases above.
-  i[[3456789]]86-*-*)
-    # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
-    host_makefile_frag="config/mh-x86omitfp"
-    ;;
 esac
 fi
 
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  found=
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/gcc; then
-      found=yes
-      break
-    fi
-  done
-  IFS="$save_ifs"
-  if test -z "${found}" && test -n "${tentative_cc}" ; then
-    CC=$tentative_cc
-  fi
-fi
-
 if test "${build}" != "${host}" ; then
   AR_FOR_BUILD=${AR_FOR_BUILD-ar}
   AS_FOR_BUILD=${AS_FOR_BUILD-as}
@@ -1289,7 +1080,8 @@ ACX_PROG_CMP_IGNORE_INITIAL
 
 # See if we are building gcc with C++.
 AC_ARG_ENABLE(build-with-cxx,
-[  --enable-build-with-cxx build with C++ compiler instead of C compiler],
+[AS_HELP_STRING([--enable-build-with-cxx],
+		[build with C++ compiler instead of C compiler])],
 ENABLE_BUILD_WITH_CXX=$enableval,
 ENABLE_BUILD_WITH_CXX=no)
 
@@ -1303,12 +1095,17 @@ have_gmp=no
 
 # Specify a location for mpc
 # check for this first so it ends up on the link line before mpfr.
-AC_ARG_WITH(mpc, [  --with-mpc=PATH        specify prefix directory for installed MPC package.
-                          Equivalent to --with-mpc-include=PATH/include
-                          plus --with-mpc-lib=PATH/lib])
-AC_ARG_WITH(mpc-include, [  --with-mpc-include=PATH
-                          specify directory for installed MPC include files])
-AC_ARG_WITH(mpc-lib, [  --with-mpc-lib=PATH    specify directory for the installed MPC library])
+AC_ARG_WITH(mpc,
+[AS_HELP_STRING([--with-mpc=PATH],
+		[specify prefix directory for installed MPC package.
+		 Equivalent to --with-mpc-include=PATH/include
+		 plus --with-mpc-lib=PATH/lib])])
+AC_ARG_WITH(mpc-include,
+[AS_HELP_STRING([--with-mpc-include=PATH],
+		[specify directory for installed MPC include files])])
+AC_ARG_WITH(mpc-lib,
+[AS_HELP_STRING([--with-mpc-lib=PATH],
+		[specify directory for the installed MPC library])])
 
 if test "x$with_mpc" != x; then
   gmplibs="-L$with_mpc/lib $gmplibs"
@@ -1332,16 +1129,22 @@ fi
 
 # Specify a location for mpfr
 # check for this first so it ends up on the link line before gmp.
-AC_ARG_WITH(mpfr-dir, [  --with-mpfr-dir=PATH    this option has been REMOVED],
-  AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
-Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH]))
-
-AC_ARG_WITH(mpfr, [  --with-mpfr=PATH        specify prefix directory for installed MPFR package.
-                          Equivalent to --with-mpfr-include=PATH/include
-                          plus --with-mpfr-lib=PATH/lib])
-AC_ARG_WITH(mpfr-include, [  --with-mpfr-include=PATH
-                          specify directory for installed MPFR include files])
-AC_ARG_WITH(mpfr-lib, [  --with-mpfr-lib=PATH    specify directory for the installed MPFR library])
+AC_ARG_WITH(mpfr-dir,
+[AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])])
+
+AC_ARG_WITH(mpfr,
+[AS_HELP_STRING([--with-mpfr=PATH],
+		[specify prefix directory for installed MPFR package.
+		 Equivalent to --with-mpfr-include=PATH/include
+		 plus --with-mpfr-lib=PATH/lib])])
+AC_ARG_WITH(mpfr-include,
+[AS_HELP_STRING([--with-mpfr-include=PATH],
+		[specify directory for installed MPFR include files])])
+AC_ARG_WITH(mpfr-lib,
+[AS_HELP_STRING([--with-mpfr-lib=PATH],
+		[specify directory for the installed MPFR library])])
 
 if test "x$with_mpfr" != x; then
   gmplibs="-L$with_mpfr/lib $gmplibs"
@@ -1365,15 +1168,22 @@ if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/m
 fi
 
 # Specify a location for gmp
-AC_ARG_WITH(gmp-dir, [  --with-gmp-dir=PATH     this option has been REMOVED],
-  AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
-Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH]))
-
-AC_ARG_WITH(gmp, [  --with-gmp=PATH         specify prefix directory for the installed GMP package.
-                          Equivalent to --with-gmp-include=PATH/include
-                          plus --with-gmp-lib=PATH/lib])
-AC_ARG_WITH(gmp-include, [  --with-gmp-include=PATH specify directory for installed GMP include files])
-AC_ARG_WITH(gmp-lib, [  --with-gmp-lib=PATH     specify directory for the installed GMP library])
+AC_ARG_WITH(gmp-dir,
+[AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])],
+[AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])])
+
+AC_ARG_WITH(gmp,
+[AS_HELP_STRING([--with-gmp=PATH],
+		[specify prefix directory for the installed GMP package.
+		 Equivalent to --with-gmp-include=PATH/include
+		 plus --with-gmp-lib=PATH/lib])])
+AC_ARG_WITH(gmp-include,
+[AS_HELP_STRING([--with-gmp-include=PATH],
+		[specify directory for installed GMP include files])])
+AC_ARG_WITH(gmp-lib,
+[AS_HELP_STRING([--with-gmp-lib=PATH],
+		[specify directory for the installed GMP library])])
 
 
 if test "x$with_gmp" != x; then
@@ -1505,8 +1315,10 @@ AC_SUBST(extra_mpc_gmp_configure_flags)
 AC_SUBST(extra_mpc_mpfr_configure_flags)
 
 # Allow host libstdc++ to be specified for static linking with PPL.
-AC_ARG_WITH(host-libstdcxx, [  --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
-                          when linking with PPL])
+AC_ARG_WITH(host-libstdcxx,
+[AS_HELP_STRING([--with-host-libstdcxx=L],
+		[use linker arguments L to link with libstdc++
+		 when linking with PPL])])
 
 case $with_host_libstdcxx in
   no|yes)
@@ -1516,7 +1328,7 @@ esac
 
 # Linker flags to use for stage1 or when not boostrapping.
 AC_ARG_WITH(stage1-ldflags,
-[  --with-stage1-ldflags=FLAGS Linker flags for stage1],
+[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
 [if test "$withval" = "no" -o "$withval" = "yes"; then
    stage1_ldflags=
  else
@@ -1527,7 +1339,7 @@ AC_SUBST(stage1_ldflags)
 
 # Libraries to use for stage1 or when not bootstrapping.
 AC_ARG_WITH(stage1-libs,
-[  -with-stage1-libs=LIBS      Libraries for stage1],
+[AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])],
 [if test "$withval" = "no" -o "$withval" = "yes"; then
    stage1_libs=
  else
@@ -1539,7 +1351,7 @@ AC_SUBST(stage1_libs)
 # Libraries to use for stage2 and later builds.  This defaults to the
 # argument passed to --with-host-libstdcxx.
 AC_ARG_WITH(boot-libs,
-[  --with-boot-libs=LIBS     Libraries for stage2 and later],
+[AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])],
 [if test "$withval" = "no" -o "$withval" = "yes"; then
    poststage1_libs=
  else
@@ -1550,69 +1362,98 @@ AC_SUBST(poststage1_libs)
 
 # Linker flags to use for stage2 and later builds.
 AC_ARG_WITH(boot-ldflags,
-[  --with-boot-ldflags=FLAGS Linker flags for stage2 and later],
+[AS_HELP_STRING([--with-boot-ldflags=FLAGS],
+		[linker flags for stage2 and later])],
 [if test "$withval" = "no" -o "$withval" = "yes"; then
    poststage1_ldflags=
  else
    poststage1_ldflags=$withval
  fi],
 [poststage1_ldflags=
- # With --enable-build-with-cxx, default to linking libstdc++ and
- # libgcc statically.  But if the user explicitly specified the
- # libraries to use, trust that they are doing what they want.
- if test "$ENABLE_BUILD_WITH_CXX" = "yes" -a "$poststage1_libs" = ""; then
+ # In stages 2 and 3, default to linking libstdc++ and libgcc
+ # statically.  But if the user explicitly specified the libraries to
+ # use, trust that they are doing what they want.
+ if test "$poststage1_libs" = ""; then
    poststage1_ldflags="-static-libstdc++ -static-libgcc"
  fi])
 AC_SUBST(poststage1_ldflags)
 
 # Check for PPL
-ppllibs=" -lppl_c -lppl -lgmpxx"
+ppllibs=
 pplinc=
+pwllib=
+
+AC_ARG_WITH(ppl,
+[AS_HELP_STRING([--with-ppl=PATH],
+		[specify prefix directory for the installed PPL package.
+		 Equivalent to --with-ppl-include=PATH/include
+		 plus --with-ppl-lib=PATH/lib])])
+AC_ARG_WITH(ppl-include,
+[AS_HELP_STRING([--with-ppl-include=PATH],
+		[specify directory for installed PPL include files])])
+AC_ARG_WITH(ppl-lib,
+[AS_HELP_STRING([--with-ppl-lib=PATH],
+		[specify directory for the installed PPL library])])
 
-AC_ARG_WITH(ppl, [  --with-ppl=PATH         Specify prefix directory for the installed PPL package
-                          Equivalent to --with-ppl-include=PATH/include
-                          plus --with-ppl-lib=PATH/lib])
-AC_ARG_WITH(ppl-include, [  --with-ppl-include=PATH Specify directory for installed PPL include files])
-AC_ARG_WITH(ppl-lib, [  --with-ppl-lib=PATH     Specify the directory for the installed PPL library])
+AC_ARG_ENABLE(ppl-version-check,
+[AS_HELP_STRING([--disable-ppl-version-check],
+		[disable check for PPL version])])
 
-case $with_ppl in 
-  no)
-    ppllibs=
-    ;;
-  "" | yes)
+case $with_ppl in
+  yes | no | "")
     ;;
   *)
-    ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
+    ppllibs="-L$with_ppl/lib"
     pplinc="-I$with_ppl/include $pplinc"
+    if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then
+      with_ppl=yes
+    else
+      AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"])
+    fi
     ;;
 esac
-if test "x$with_ppl_include" != x; then
+
+if test x"$with_ppl_include" != x; then
   pplinc="-I$with_ppl_include $pplinc"
+  with_ppl=yes
 fi
+
 if test "x$with_ppl_lib" != x; then
-  ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+  ppllibs="-L$with_ppl_lib"
+  with_ppl=yes
 fi
-if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
-  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"' -lppl_c -lppl -lgmpxx '
+
+if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
+  if test x"$enable_watchdog" = xyes; then
+    pwllib="-lpwl"
+  fi
+  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir"
   pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C '
   enable_ppl_version_check=no
+  with_ppl=yes
 fi
 
-AC_ARG_ENABLE(ppl-version-check,
-[  --disable-ppl-version-check    disable check for PPL version],
-ENABLE_PPL_CHECK=$enableval,
-ENABLE_PPL_CHECK=yes)
+if test "x$with_ppl" != xno; then
+  if test "x$pwllib" = x; then
+    saved_LIBS="$LIBS"
+    LIBS="$LIBS $ppllibs -lstdc++ -lm"
+    AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"])
+    LIBS="$saved_LIBS"
+  fi
 
-if test "x$with_ppl" != "xno" -a "${ENABLE_PPL_CHECK}" = "yes"; then
-  saved_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $pplinc $gmpinc"
-  AC_MSG_CHECKING([for version 0.10 (or later revision) of PPL])
-  AC_TRY_COMPILE([#include "ppl_c.h"],[
-  #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 10
-  choke me
-  #endif
-  ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
-  CFLAGS="$saved_CFLAGS"
+  ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx"
+
+  if test "$enable_ppl_version_check" != no; then
+    saved_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $pplinc $gmpinc"
+    AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL])
+    AC_TRY_COMPILE([#include "ppl_c.h"],[
+    #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
+    choke me
+    #endif
+    ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ])
+    CFLAGS="$saved_CFLAGS"
+  fi
 fi
 
 # Flags needed for PPL
@@ -1626,6 +1467,11 @@ dnl Provide configure switches and initialize clooginc & clooglibs
 dnl with user input.
 CLOOG_INIT_FLAGS
 if test "x$with_ppl" = "xno"; then
+  dnl Only execute fail-action, if CLooG has been requested.
+  CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no])
+  if test "${graphite_requested}" = yes; then
+    AC_MSG_ERROR([Unable to find a usable PPL.  See config.log for details.])
+  fi
   with_cloog=no
 fi
 if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
@@ -1634,29 +1480,20 @@ if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \
   clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include '
 fi
 if test "x$with_cloog" != "xno"; then
-  dnl Version check for CLooG-Org
-  dnl As long as there is no new release of CLooG,
-  dnl we will check for 0.14.0.
-  dnl
-  dnl The first git revision that will work with
-  dnl GCC is: bd91b845a65805c290d43fc1bef8139864a163fb
-  dnl This is enforced implictly, as this is the commit that
-  dnl introduced the versioning information used within our
-  dnl checks.
+  dnl The minimal version of CLooG required for Graphite.
   dnl
-  dnl If we're using CLooG-Legacy, the provided version information
-  dnl will be ignored.
-  CLOOG_CHECK_VERSION(0,14,0)
+  dnl If we use CLooG-Legacy, the provided version information is
+  dnl ignored.
+  CLOOG_CHECK_VERSION(0,16,1)
 
-  dnl Only execute fail-action, if CLooG has been
-  dnl requested.
+  dnl Only execute fail-action, if CLooG has been requested.
   CLOOG_IF_FAILED([
-    AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])])
+    AC_MSG_ERROR([Unable to find a usable CLooG.  See config.log for details.])])
 fi
 
 # Check for LTO support.
 AC_ARG_ENABLE(lto,
-[  --enable-lto            enable link time optimization support],
+[AS_HELP_STRING([--enable-lto], [enable link time optimization support])],
 enable_lto=$enableval,
 enable_lto=yes; default_enable_lto=yes)
 
@@ -1664,7 +1501,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
   build_lto_plugin=yes
 ],[if test x"$default_enable_lto" = x"yes" ; then
     case $target in
-      *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+      *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
       # On other non-ELF platforms, LTO has yet to be validated.
       *) enable_lto=no ;;
     esac
@@ -1917,8 +1754,9 @@ if test -d ${srcdir}/gcc; then
   fi
 
   AC_ARG_ENABLE(stage1-languages,
-[  --enable-stage1-languages@<:@=all@:>@   choose additional languages to build during
-                          stage1.  Mostly useful for compiler development.],
+  [AS_HELP_STRING([[--enable-stage1-languages[=all]]],
+		  [choose additional languages to build during
+		  stage1.  Mostly useful for compiler development])],
   [case ,${enable_stage1_languages}, in
     ,no,|,,)
       # Set it to something that will have no effect in the loop below
@@ -1979,8 +1817,9 @@ done
 
 # Check for Boehm's garbage collector
 AC_ARG_ENABLE(objc-gc,
-[  --enable-objc-gc        enable use of Boehm's garbage collector with the
-                          GNU Objective-C runtime],
+[AS_HELP_STRING([--enable-objc-gc],
+		[enable use of Boehm's garbage collector with the
+		 GNU Objective-C runtime])],
 [case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
   *,objc,*:*:yes:*target-boehm-gc*)
     AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration])
@@ -2135,8 +1974,8 @@ ACX_TOOL_DIRS
 copy_dirs=
 
 AC_ARG_WITH([build-sysroot], 
-  [  --with-build-sysroot=SYSROOT
-                          use sysroot as the system root during the build],
+  [AS_HELP_STRING([--with-build-sysroot=SYSROOT],
+		  [use sysroot as the system root during the build])],
   [if test x"$withval" != x ; then
      SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
    fi],
@@ -2144,8 +1983,8 @@ AC_ARG_WITH([build-sysroot],
 AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
 
 AC_ARG_WITH([debug-prefix-map],
-  [  --with-debug-prefix-map='A=B C=D ...'
-                             map A to B, C to D ... in debug information],
+  [AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'],
+		  [map A to B, C to D ... in debug information])],
   [if test x"$withval" != x; then
      DEBUG_PREFIX_CFLAGS_FOR_TARGET=
      for debug_map in $withval; do
@@ -2297,46 +2136,12 @@ done
 # the *-*-osname triplets last.
 md_exec_prefix=
 case "${target}" in
-  alpha*-*-*vms*)
-    md_exec_prefix=/gnu/lib/gcc-lib
-    ;;
   i[[34567]]86-pc-msdosdjgpp*)
     md_exec_prefix=/dev/env/DJDIR/bin
     ;;
-  i[[34567]]86-*-sco3.2v5*)
-    if test $with_gnu_as = yes; then
-      md_exec_prefix=/usr/gnu/bin
-    else
-      md_exec_prefix=/usr/ccs/bin/elf
-    fi
-    ;;
-
-  mn10300-*-* | \
-  powerpc-*-chorusos* | \
-  powerpc*-*-eabi* | \
-  powerpc*-*-sysv* | \
-  powerpc*-*-kaos* | \
-  s390x-ibm-tpf*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  sparc64-*-elf*)
-    ;;
-  v850*-*-*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  xtensa*-*-elf*)
-    ;;
-
-  *-*-beos* | \
-  *-*-elf* | \
   *-*-hpux* | \
-  *-*-netware* | \
   *-*-nto-qnx* | \
-  *-*-rtems* | \
-  *-*-solaris2* | \
-  *-*-sysv[[45]]* | \
-  *-*-vxworks* | \
-  *-wrs-windiss)
+  *-*-solaris2*)
     md_exec_prefix=/usr/ccs/bin
     ;;
 esac
@@ -2346,9 +2151,6 @@ extra_nmflags_for_target=
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  mep*-*-*)
-    target_makefile_frag="config/mt-mep"
-    ;;
   spu-*-*)
     target_makefile_frag="config/mt-spu"
     ;;
@@ -2361,9 +2163,6 @@ case "${target}" in
   mips*-*-*linux* | mips*-*-gnu*)
     target_makefile_frag="config/mt-mips-gnu"
     ;;
-  *-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
     ;;
@@ -2378,9 +2177,6 @@ case "${target}" in
     # ranlib before Darwin10 requires the -c flag to look at common symbols.
     extra_ranlibflags_for_target=" -c"
     ;;
-  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
-    target_makefile_frag="config/mt-wince"
-    ;;
 esac
 
 alphaieee_frag=/dev/null
@@ -2507,7 +2303,7 @@ esac
 # Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
-  *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+  *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
   *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
@@ -2574,7 +2370,8 @@ INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 # Do not nest @if/@endif pairs, because configure will not warn you at all.
 
 AC_ARG_ENABLE([bootstrap],
-[  --enable-bootstrap      enable bootstrapping @<:@yes if native build@:>@],,
+[AS_HELP_STRING([--enable-bootstrap],
+		[enable bootstrapping @<:@yes if native build@:>@])],,
 enable_bootstrap=default)
 
 # Issue errors and warnings for invalid/strange bootstrap combinations.
@@ -2643,8 +2440,8 @@ esac
 AC_MSG_CHECKING(for default BUILD_CONFIG)
 
 AC_ARG_WITH([build-config],
-  [--with-build-config='NAME NAME2...'
-                          Use config/NAME.mk build configuration],
+  [AS_HELP_STRING([--with-build-config='NAME NAME2...'],
+		  [use config/NAME.mk build configuration])],
   [case $with_build_config in
    yes) with_build_config= ;;
    no) with_build_config= BUILD_CONFIG= ;;
@@ -2729,10 +2526,10 @@ extrasub_target="$extrasub_target
 # Create the serialization dependencies.  This uses a temporary file.
 
 AC_ARG_ENABLE([serial-configure],
-[  --enable-serial-@<:@{host,target,build}-@:>@configure
-                          force sequential configuration of
-                          sub-packages for the host, target or build
-                          machine, or all sub-packages])
+[AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]],
+		[force sequential configuration of
+		 sub-packages for the host, target or build
+		 machine, or all sub-packages])])
 
 case ${enable_serial_configure} in
   yes)
@@ -2784,6 +2581,7 @@ AC_SUBST_FILE(serialization_dependencies)
 # Also strip program-prefix, program-suffix, and program-transform-name,
 # so that we can pass down a consistent program-transform-name.
 baseargs=
+tbaseargs=
 keep_next=no
 skip_next=no
 eval "set -- $ac_configure_args"
@@ -2799,6 +2597,7 @@ do
 	ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     baseargs="$baseargs '$ac_arg'"
+    tbaseargs="$tbaseargs '$ac_arg'"
     keep_next=no
     continue
   fi
@@ -2820,11 +2619,45 @@ do
       ;;
   esac
 
+  skip_targ=no
+  case $ac_arg in
+changequote(,)
+  --with-* | --without-*)
+    libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'`
+
+    case $libopt in
+    *[-_]include)
+      lib=`echo "$libopt" | sed 's,[-_]include$,,'`
+      ;;
+    *[-_]lib)
+      lib=`echo "$libopt" | sed 's,[-_]lib$,,'`
+      ;;
+    *)
+      lib=$libopt
+      ;;
+    esac
+changequote([,])
+
+    case $lib in
+    mpc | mpfr | gmp | ppl | cloog)
+      # If we're processing --with-$lib, --with-$lib-include or
+      # --with-$lib-lib, for one of the libs above, and target is
+      # different from host, don't pass the current argument to any
+      # target library's configure.
+      if test x$is_cross_compiler = xyes; then
+        skip_targ=yes
+      fi
+      ;;
+    esac
+    ;;
+  esac
+
   case "$ac_arg" in
     --cache-file=/dev/null | \
     -cache-file=/dev/null )
       # Handled here to avoid the test to skip args below.
       baseargs="$baseargs '$ac_arg'"
+      tbaseargs="$tbaseargs '$ac_arg'"
       # Assert: $separate_arg should always be no.
       keep_next=$separate_arg
       ;;
@@ -2855,6 +2688,9 @@ do
 	  ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
       esac
       baseargs="$baseargs '$ac_arg'"
+      if test X"$skip_targ" = Xno; then
+        tbaseargs="$tbaseargs '$ac_arg'"
+      fi
       keep_next=$separate_arg
       ;;
     *)
@@ -2881,10 +2717,13 @@ EOF_SED
 gcc_transform_name=`cat conftestsed.out`
 rm -f conftestsed.out
 baseargs="$baseargs --program-transform-name='${gcc_transform_name}'"
+tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'"
 if test "$silent" = yes; then
   baseargs="$baseargs --silent"
+  tbaseargs="$tbaseargs --silent"
 fi
 baseargs="$baseargs --disable-option-checking"
+tbaseargs="$tbaseargs --disable-option-checking"
 
 # Record and document user additions to sub configure arguments.
 AC_ARG_VAR([build_configargs],
@@ -2913,7 +2752,7 @@ esac
 # This seems to be due to autoconf 2.5x stupidity.
 host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
 
-target_configargs="$target_configargs ${baseargs}"
+target_configargs="$target_configargs ${tbaseargs}"
 
 # Passing a --with-cross-host argument lets the target libraries know
 # whether they are being built with a cross-compiler or being built
@@ -3108,7 +2947,6 @@ AC_SUBST(NM_FOR_BUILD)
 AC_SUBST(RANLIB_FOR_BUILD)
 AC_SUBST(WINDMC_FOR_BUILD)
 AC_SUBST(WINDRES_FOR_BUILD)
-AC_SUBST(config_shell)
 
 # Generate default definitions for YACC, M4, LEX and other programs that run
 # on the build machine.  These are used if the Makefile can't locate these
@@ -3196,8 +3034,8 @@ AC_SUBST(CXXFLAGS)
 
 # Target tools.
 AC_ARG_WITH([build-time-tools], 
-  [  --with-build-time-tools=PATH
-                          use given path to find target tools during the build],
+  [AS_HELP_STRING([--with-build-time-tools=PATH],
+		  [use given path to find target tools during the build])],
   [case x"$withval" in
      x/*) ;;
      *)
@@ -3231,8 +3069,9 @@ RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
 GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
 GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS
 GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
-		[gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+		[gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
 		c++)
 GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
 		[gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
@@ -3283,8 +3122,9 @@ AC_SUBST(COMPILER_NM_FOR_TARGET)
 
 AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
 AC_ARG_ENABLE(maintainer-mode,
-[  --enable-maintainer-mode enable make rules and dependencies not useful
-                          (and sometimes confusing) to the casual installer],
+[AS_HELP_STRING([--enable-maintainer-mode],
+		[enable make rules and dependencies not useful
+		 (and sometimes confusing) to the casual installer])],
       USE_MAINTAINER_MODE=$enableval,
       USE_MAINTAINER_MODE=no)
 AC_MSG_RESULT($USE_MAINTAINER_MODE)
@@ -3338,8 +3178,8 @@ AC_SUBST(stage1_cflags)
 
 # Enable --enable-checking in stage1 of the compiler.
 AC_ARG_ENABLE(stage1-checking,
-[  --enable-stage1-checking@<:@=all@:>@   choose additional checking for stage1
-                          of the compiler],
+[AS_HELP_STRING([[--enable-stage1-checking[=all]]],
+		[choose additional checking for stage1 of the compiler])],
 [stage1_checking=--enable-checking=${enable_stage1_checking}],
 [if test "x$enable_checking" = xno || test "x$enable_checking" = x; then
   stage1_checking=--enable-checking=yes,types
@@ -3350,7 +3190,8 @@ AC_SUBST(stage1_checking)
 
 # Enable -Werror in bootstrap stage2 and later.
 AC_ARG_ENABLE(werror,
-[  --enable-werror         enable -Werror in bootstrap stage2 and later], [],
+[AS_HELP_STRING([--enable-werror],
+		[enable -Werror in bootstrap stage2 and later])], [],
 [if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then
   enable_werror=yes
 else