X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=configure;h=f8c5cfeb03b029672018f579825b62df9930e4ac;hb=1beff22e49a49de5806ed7d030912715971288d4;hp=307d9c096ab41fc5251ab2cd1e863d0736e4206f;hpb=ba1081ef51af071873079e430cba43ff00e0b077;p=pf3gnuchains%2Fgcc-fork.git diff --git a/configure b/configure index 307d9c096ab..f8c5cfeb03b 100755 --- a/configure +++ b/configure @@ -12,6 +12,8 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help + --enable-libada Builds libada directory" +ac_help="$ac_help --enable-serial-[{host,target,build}-]configure Force sequential configuration of sub-packages for the host, target or build @@ -19,6 +21,8 @@ ac_help="$ac_help ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" +ac_help="$ac_help + --enable-werror enable -Werror in bootstrap stage2 and later" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -577,7 +581,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:581: checking host system type" >&5 +echo "configure:585: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -598,7 +602,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:602: checking target system type" >&5 +echo "configure:606: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -616,7 +620,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:620: checking build system type" >&5 +echo "configure:624: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -671,7 +675,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:675: checking for a BSD compatible install" >&5 +echo "configure:679: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -767,6 +771,14 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # AC_PROG_CPP_WERROR +# Test for GNAT. +# We require the gnatbind program, and a compiler driver that +# understands Ada. We use the user's CC setting, already found. +# +# Sets the shell variable have_gnat to yes or no as appropriate, and +# substitutes GNATBIND. + + ### we might need to use some other shell than /bin/sh for running subshells ### If we are on Windows, search for the shell. This will permit people @@ -891,7 +903,8 @@ target_libraries="target-libiberty \ target-libstdc++-v3 \ target-libf2c \ ${libgcj} \ - target-libobjc" + target-libobjc \ + target-libada" # these tools are built using the target libraries, and are intended to # run only in the target environment @@ -1038,26 +1051,26 @@ case "${host}" in noconfigdirs="$noconfigdirs byacc" ;; i[3456789]86-*-vsta) - noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext" + noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext" ;; i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*) - noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi" + noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi" ;; i[3456789]86-*-mingw32*) # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv" - noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool" + noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool" ;; i[3456789]86-*-beos*) noconfigdirs="$noconfigdirs tk itcl tix libgui gdb" ;; *-*-cygwin*) - noconfigdirs="autoconf automake send-pr rcs guile perl" + noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl" ;; *-*-netbsd*) - noconfigdirs="rcs" + noconfigdirs="$noconfigdirs rcs" ;; ppc*-*-pe) - noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv" + noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv" ;; powerpc-*-beos*) noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline" @@ -1067,6 +1080,18 @@ case "${host}" in ;; esac +# Check whether --enable-libada or --disable-libada was given. +if test "${enable_libada+set}" = set; then + enableval="$enable_libada" + ENABLE_LIBADA=$enableval +else + ENABLE_LIBADA=yes +fi + +if test "${ENABLE_LIBADA}" != "yes" ; then + noconfigdirs="$noconfigdirs target-libada" +fi + # Save it here so that, even in case of --enable-libgcj, if the Java # front-end isn't enabled, we still get libgcj disabled. libgcj_saved=$libgcj @@ -1386,7 +1411,7 @@ case "${target}" in noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" ;; rs6000-*-aix*) - noconfigdirs="$noconfigdirs gprof ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" ;; rs6000-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" @@ -1414,6 +1439,9 @@ case "${target}" in mipstx39-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips ;; + mips64*-*-linux*) + noconfigdirs="$noconfigdirs target-newlib ${libgcj}" + ;; mips*-*-linux*) noconfigdirs="$noconfigdirs target-newlib target-libgloss" ;; @@ -1496,273 +1524,6 @@ case "${noconfigdirs}" in *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;; esac -# Figure out what language subdirectories are present. -# Look if the user specified --enable-languages="..."; if not, use -# the environment variable $LANGUAGES if defined. $LANGUAGES might -# go away some day. -# NB: embedded tabs in this IF block -- do not untabify -if test x"${enable_languages+set}" != xset; then - if test x"${LANGUAGES+set}" = xset; then - enable_languages="${LANGUAGES}" - echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 - else - enable_languages=all - fi -else - if test x"${enable_languages}" = x || - test x"${enable_languages}" = xyes; - then - echo configure.in: --enable-languages needs at least one language argument 1>&2 - exit 1 - fi -fi -enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'` - -# First scan to see if an enabled language requires some other language. -# We assume that a given config-lang.in will list all the language -# front ends it requires, even if some are required indirectly. -for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do - case ${lang_frag} in - ..) ;; - # The odd quoting in the next line works around - # an apparent bug in bash 1.12 on linux. - ${srcdir}/gcc/[*]/config-lang.in) ;; - *) - # From the config-lang.in, get $language, $lang_requires - language= - lang_requires= - . ${lang_frag} - for other in ${lang_requires} ; do - case ,${enable_languages}, in - *,$other,*) ;; - *,all,*) ;; - *,$language,*) - echo " \`$other' language required by \`$language'; enabling" 1>&2 - enable_languages="${enable_languages},${other}" - ;; - esac - done - ;; - esac -done - -for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do - case ${lang_frag} in - ..) ;; - # The odd quoting in the next line works around - # an apparent bug in bash 1.12 on linux. - ${srcdir}/gcc/[*]/config-lang.in) ;; - *) - # From the config-lang.in, get $language, $target_libs, - # $lang_dirs, and $build_by_default - language= - target_libs= - lang_dirs= - build_by_default= - . ${lang_frag} - if test "x$language" = x ; then - echo "${lang_frag} doesn't set \$language." 1>&2 - exit 1 - fi - case ,${enable_languages}, in - *,${language},*) - # Language was explicitly selected; include it. - add_this_lang=yes - ;; - *,all,*) - # 'all' was selected; include 'default' languages. - case ${build_by_default} in - no) add_this_lang=no ;; - *) add_this_lang=yes ;; - esac - ;; - *) add_this_lang=no ;; - esac - case ${add_this_lang} in - no) - # Remove language-dependent dirs. - eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" - ;; - esac - ;; - esac -done - -# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and -# $target_configdirs. -# If we have the source for $noconfigdirs entries, add them to $notsupp. - -notsupp="" -for dir in . $skipdirs $noconfigdirs ; do - dirname=`echo $dir | sed -e s/target-//g` - if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then - configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` - if test -r $srcdir/$dirname/configure ; then - if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then - true - else - notsupp="$notsupp $dir" - fi - fi - fi - if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then - target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"` - if test -r $srcdir/$dirname/configure ; then - if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then - true - else - notsupp="$notsupp $dir" - fi - fi - fi -done - -# Sometimes the tools are distributed with libiberty but with no other -# libraries. In that case, we don't want to build target-libiberty. -if test -n "${target_configdirs}" ; then - others= - for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do - if test "$i" != "libiberty" ; then - if test -r $srcdir/$i/configure ; then - others=yes; - break; - fi - fi - done - if test -z "${others}" ; then - target_configdirs= - fi -fi - -# Quietly strip out all directories which aren't configurable in this tree. -# This relies on all configurable subdirectories being autoconfiscated, which -# is now the case. -configdirs_all="$configdirs" -configdirs= -for i in ${configdirs_all} ; do - if test -f ${srcdir}/$i/configure ; then - configdirs="${configdirs} $i" - fi -done -target_configdirs_all="$target_configdirs" -target_configdirs= -for i in ${target_configdirs_all} ; do - j=`echo $i | sed -e s/target-//g` - if test -f ${srcdir}/$j/configure ; then - target_configdirs="${target_configdirs} $i" - fi -done - -# Produce a warning message for the subdirs we can't configure. -# This isn't especially interesting in the Cygnus tree, but in the individual -# FSF releases, it's important to let people know when their machine isn't -# supported by the one or two programs in a package. - -if test -n "${notsupp}" && test -z "${norecursion}" ; then - # If $appdirs is non-empty, at least one of those directories must still - # be configured, or we error out. (E.g., if the gas release supports a - # specified target in some subdirs but not the gas subdir, we shouldn't - # pretend that all is well.) - if test -n "$appdirs" ; then - for dir in $appdirs ; do - if test -r $dir/Makefile.in ; then - if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then - appdirs="" - break - fi - if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then - appdirs="" - break - fi - fi - done - if test -n "$appdirs" ; then - echo "*** This configuration is not supported by this package." 1>&2 - exit 1 - fi - fi - # Okay, some application will build, or we don't care to check. Still - # notify of subdirs not getting built. - echo "*** This configuration is not supported in the following subdirectories:" 1>&2 - echo " ${notsupp}" 1>&2 - echo " (Any other directories should still work fine.)" 1>&2 -fi - -case "$host" in - *msdosdjgpp*) - enable_gdbtk=no ;; -esac - -copy_dirs= - -# Handle --with-headers=XXX. If the value is not "yes", the contents of -# the named directory are copied to $(tooldir)/sys-include. -if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then - if test x${is_cross_compiler} = xno ; then - echo 1>&2 '***' --with-headers is only supported when cross compiling - exit 1 - fi - if test x"${with_headers}" != xyes ; then - case "${exec_prefixoption}" in - "") x=${prefix} ;; - *) x=${exec_prefix} ;; - esac - copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include" - fi -fi - -# Handle --with-libs=XXX. If the value is not "yes", the contents of -# the name directories are copied to $(tooldir)/lib. Multiple directories -# are permitted. -if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then - if test x${is_cross_compiler} = xno ; then - echo 1>&2 '***' --with-libs is only supported when cross compiling - exit 1 - fi - if test x"${with_libs}" != xyes ; then - # Copy the libraries in reverse order, so that files in the first named - # library override files in subsequent libraries. - case "${exec_prefixoption}" in - "") x=${prefix} ;; - *) x=${exec_prefix} ;; - esac - for l in ${with_libs}; do - copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}" - done - fi -fi - -# Handle ${copy_dirs} -set fnord ${copy_dirs} -shift -while test $# != 0 ; do - if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then - : - else - echo Copying $1 to $2 - - # Use the install script to create the directory and all required - # parent directories. - if test -d $2 ; then - : - else - echo >config.temp - ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED - fi - - # Copy the directory, assuming we have tar. - # FIXME: Should we use B in the second tar? Not all systems support it. - (cd $1; tar -cf - .) | (cd $2; tar -xpf -) - - # It is the responsibility of the user to correctly adjust all - # symlinks. If somebody can figure out how to handle them correctly - # here, feel free to add the code. - - echo $1 > $2/COPIED - fi - shift; shift -done - # Work in distributions that contain no compiler tools, like Autoconf. tentative_cc="" host_makefile_frag=/dev/null @@ -1914,45 +1675,851 @@ case "${host}" in esac fi -extra_arflags_for_target= -extra_nmflags_for_target= -extra_ranlibflags_for_target= -target_makefile_frag=/dev/null -case "${target}" in - i[3456789]86-*-netware*) - target_makefile_frag="config/mt-netware" - ;; - powerpc-*-netware*) - target_makefile_frag="config/mt-netware" - ;; - *-*-linux*) - target_makefile_frag="config/mt-linux" - ;; - *-*-aix4.[3456789]* | *-*-aix[56789].*) - # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm - # commands to handle both 32-bit and 64-bit objects. These flags are - # harmless if we're using GNU nm or ar. - extra_arflags_for_target=" -X32_64" - extra_nmflags_for_target=" -B -X32_64" - ;; - *-*-darwin*) - # ranlib from Darwin requires the -c flag to look at common symbols. - extra_ranlibflags_for_target=" -c" - ;; - mips*-*-pe | sh*-*-pe | *arm-wince-pe) - target_makefile_frag="config/mt-wince" - ;; -esac - -alphaieee_frag=/dev/null -case $target in - alpha*-*-*) - # This just makes sure to use the -mieee option to build target libs. - # This should probably be set individually by each library. - alphaieee_frag="config/mt-alphaieee" - ;; -esac - +# If we aren't going to be using gcc, see if we can extract a definition +# of CC from the fragment. +# Actually, use the 'pre-extracted' version above. +if test -z "${CC}" && test "${build}" = "${host}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + found= + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/gcc; then + found=yes + break + fi + done + IFS="$save_ifs" + if test -z "${found}" && test -n "${tentative_cc}" ; then + CC=$tentative_cc + fi +fi + +if test "${build}" != "${host}" ; then + # If we are doing a Canadian Cross, in which the host and build systems + # are not the same, we set reasonable default values for the tools. + + BISON=${BISON-bison} + CC=${CC-${host_alias}-gcc} + CFLAGS=${CFLAGS-"-g -O2"} + CXX=${CXX-${host_alias}-c++} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + CC_FOR_BUILD=${CC_FOR_BUILD-gcc} + CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} + CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} + GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj} + GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} + BUILD_PREFIX=${build_alias}- + BUILD_PREFIX_1=${build_alias}- + MAKEINFO=${MAKEINFO-makeinfo} + + if test -z "${YACC}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/bison; then + YACC="bison -y" + break + fi + if test -f $dir/byacc; then + YACC=byacc + break + fi + if test -f $dir/yacc; then + YACC=yacc + break + fi + done + IFS="$save_ifs" + if test -z "${YACC}" ; then + YACC="bison -y" + fi + fi + + if test -z "${LEX}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/flex; then + LEX=flex + break + fi + if test -f $dir/lex; then + LEX=lex + break + fi + done + IFS="$save_ifs" + LEX=${LEX-flex} + fi + +else + # Set reasonable default values for some tools even if not Canadian. + # Of course, these are different reasonable default values, originally + # specified directly in the Makefile. + # We don't export, so that autoconf can do its job. + # Note that all these settings are above the fragment inclusion point + # in Makefile.in, so can still be overridden by fragments. + # This is all going to change when we autoconfiscate... + + BISON="\$(USUAL_BISON)" + CC_FOR_BUILD="\$(CC)" + GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" + BUILD_PREFIX= + BUILD_PREFIX_1=loser- + MAKEINFO="\$(USUAL_MAKEINFO)" + LEX="\$(USUAL_LEX)" + YACC="\$(USUAL_YACC)" + + # If CC is still not set, try to get gcc. + cc_prog_is_gcc= + if test -z "${CC}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/gcc; then + CC="gcc" + cc_prog_is_gcc=yes + echo 'void f(){}' > conftest.c + if test -z "`${CC} -g -c conftest.c 2>&1`"; then + CFLAGS=${CFLAGS-"-g -O2"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + else + CFLAGS=${CFLAGS-"-O2"} + CXXFLAGS=${CXXFLAGS-"-O2"} + fi + rm -f conftest* + break + fi + done + IFS="$save_ifs" + CC=${CC-cc} + else + # Determine if we are using gcc. + cat > conftest.c </dev/null 2>&1; then + cc_prog_is_gcc=yes + fi + rm -f conftest.c + if test -z "${CFLAGS}"; then + # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC + # is set to a version of gcc. + if test "$cc_prog_is_gcc" = yes; then + echo 'void f(){}' > conftest.c + if test -z "`${CC} -g -c conftest.c 2>&1`"; then + CFLAGS=${CFLAGS-"-g -O2"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + else + CFLAGS=${CFLAGS-"-O2"} + CXXFLAGS=${CXXFLAGS-"-O2"} + fi + rm -f conftest* + fi + fi + fi + + # We must set the default linker to the linker used by gcc for the correct + # operation of libtool. If LD is not defined and we are using gcc, try to + # set the LD default to the ld used by gcc. + if test -z "$LD"; then + if test "$cc_prog_is_gcc" = yes; then + case $build in + *-*-mingw*) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; + *) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; + esac + case $gcc_prog_ld in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + LD="$gcc_prog_ld" ;; + esac + fi + fi + + CXX=${CXX-"c++"} + CFLAGS=${CFLAGS-"-g"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} +fi + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1858: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1888: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1939: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1971: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 1982 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:1987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:2013: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:2018: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:2046: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + + + +# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args. +set dummy ${ac_tool_prefix}gnatbind; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2082: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$GNATBIND"; then + ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_GNATBIND="${ac_tool_prefix}gnatbind" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +GNATBIND="$ac_cv_prog_GNATBIND" +if test -n "$GNATBIND"; then + echo "$ac_t""$GNATBIND" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_GNATBIND"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "gnatbind", so it can be a program name with args. +set dummy gnatbind; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2114: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$GNATBIND"; then + ac_cv_prog_GNATBIND="$GNATBIND" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_GNATBIND="gnatbind" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_GNATBIND" && ac_cv_prog_GNATBIND="no" +fi +fi +GNATBIND="$ac_cv_prog_GNATBIND" +if test -n "$GNATBIND"; then + echo "$ac_t""$GNATBIND" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + GNATBIND="no" +fi +fi + +echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6 +echo "configure:2147: checking whether compiler driver understands Ada" >&5 +if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat >conftest.adb <&1 || echo failure` +if test x"$errors" = x; then + acx_cv_cc_gcc_supports_ada=yes + break +fi +rm -f conftest.* +fi + +echo "$ac_t""$acx_cv_cc_gcc_supports_ada" 1>&6 + +if test x$GNATBIND != xno && test x$acx_cv_gcc_supports_ada != xno; then + have_gnat=yes +else + have_gnat=no +fi + + +# By default, C is the only stage 1 language. +stage1_languages=c + + +# Figure out what language subdirectories are present. +# Look if the user specified --enable-languages="..."; if not, use +# the environment variable $LANGUAGES if defined. $LANGUAGES might +# go away some day. +# NB: embedded tabs in this IF block -- do not untabify +if test -d ${srcdir}/gcc; then + if test x"${enable_languages+set}" != xset; then + if test x"${LANGUAGES+set}" = xset; then + enable_languages="${LANGUAGES}" + echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 + else + enable_languages=all + fi + else + if test x"${enable_languages}" = x || + test x"${enable_languages}" = xyes; + then + echo configure.in: --enable-languages needs at least one language argument 1>&2 + exit 1 + fi + fi + enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'` + + # First scan to see if an enabled language requires some other language. + # We assume that a given config-lang.in will list all the language + # front ends it requires, even if some are required indirectly. + for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in + ..) ;; + # The odd quoting in the next line works around + # an apparent bug in bash 1.12 on linux. + ${srcdir}/gcc/[*]/config-lang.in) ;; + *) + # From the config-lang.in, get $language, $lang_requires + language= + lang_requires= + . ${lang_frag} + for other in ${lang_requires} ; do + case ,${enable_languages}, in + *,$other,*) ;; + *,all,*) ;; + *,$language,*) + echo " \`$other' language required by \`$language'; enabling" 1>&2 + enable_languages="${enable_languages},${other}" + ;; + esac + done + ;; + esac + done + + new_enable_languages=c + missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ ` + + for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in + ..) ;; + # The odd quoting in the next line works around + # an apparent bug in bash 1.12 on linux. + ${srcdir}/gcc/[*]/config-lang.in) ;; + *) + # From the config-lang.in, get $language, $target_libs, + # $lang_dirs, $boot_language, and $build_by_default + language= + target_libs= + lang_dirs= + boot_language= + build_by_default= + . ${lang_frag} + # This is quite sensitive to the ordering of the case statement arms. + case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in + *::*:*) + echo "${lang_frag} doesn't set \$language." 1>&2 + exit 1 + ;; + *:ada:no:*) + # Ada was requested with no preexisting GNAT. Disable unconditionally. + add_this_lang=no + ;; + *,${language},*:*:*:*) + # Language was explicitly selected; include it. + add_this_lang=yes + ;; + *,all,*:*:*:no) + # 'all' was selected, but this is not a default language + # so do not include it. + add_this_lang=no + ;; + *,all,*:*:*:*) + # 'all' was selected and this is a default language; include it. + add_this_lang=yes + ;; + *) + add_this_lang=no + ;; + esac + case $add_this_lang in + no) + # Remove language-dependent dirs. + eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" + ;; + *) + new_enable_languages="$new_enable_languages,$language" + missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` + case ${boot_language} in + yes) + # Add to (comma-separated) list of stage 1 languages. + stage1_languages="${stage1_languages},${language}" + ;; + esac + ;; + esac + ;; + esac + done + + missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"` + if test "x$missing_languages" != x; then + { echo "configure: error: +The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; } + fi + + if test "x$new_enable_languages" != "x$enable_languages"; then + echo The following languages will be built: ${new_enable_languages} + fi + enable_languages="$new_enable_languages" + ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[^ ]*//' -e 's/$/ --enable-languages='"$enable_languages"/ ` +fi + +# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and +# $target_configdirs. +# If we have the source for $noconfigdirs entries, add them to $notsupp. + +notsupp="" +for dir in . $skipdirs $noconfigdirs ; do + dirname=`echo $dir | sed -e s/target-//g` + if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then + configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` + if test -r $srcdir/$dirname/configure ; then + if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then + true + else + notsupp="$notsupp $dir" + fi + fi + fi + if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then + target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"` + if test -r $srcdir/$dirname/configure ; then + if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then + true + else + notsupp="$notsupp $dir" + fi + fi + fi +done + +# Sometimes the tools are distributed with libiberty but with no other +# libraries. In that case, we don't want to build target-libiberty. +if test -n "${target_configdirs}" ; then + others= + for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do + if test "$i" != "libiberty" ; then + if test -r $srcdir/$i/configure ; then + others=yes; + break; + fi + fi + done + if test -z "${others}" ; then + target_configdirs= + fi +fi + +# Quietly strip out all directories which aren't configurable in this tree. +# This relies on all configurable subdirectories being autoconfiscated, which +# is now the case. +configdirs_all="$configdirs" +configdirs= +for i in ${configdirs_all} ; do + if test -f ${srcdir}/$i/configure ; then + configdirs="${configdirs} $i" + fi +done +target_configdirs_all="$target_configdirs" +target_configdirs= +for i in ${target_configdirs_all} ; do + j=`echo $i | sed -e s/target-//g` + if test -f ${srcdir}/$j/configure ; then + target_configdirs="${target_configdirs} $i" + fi +done + +# Produce a warning message for the subdirs we can't configure. +# This isn't especially interesting in the Cygnus tree, but in the individual +# FSF releases, it's important to let people know when their machine isn't +# supported by the one or two programs in a package. + +if test -n "${notsupp}" && test -z "${norecursion}" ; then + # If $appdirs is non-empty, at least one of those directories must still + # be configured, or we error out. (E.g., if the gas release supports a + # specified target in some subdirs but not the gas subdir, we shouldn't + # pretend that all is well.) + if test -n "$appdirs" ; then + for dir in $appdirs ; do + if test -r $dir/Makefile.in ; then + if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then + appdirs="" + break + fi + if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then + appdirs="" + break + fi + fi + done + if test -n "$appdirs" ; then + echo "*** This configuration is not supported by this package." 1>&2 + exit 1 + fi + fi + # Okay, some application will build, or we don't care to check. Still + # notify of subdirs not getting built. + echo "*** This configuration is not supported in the following subdirectories:" 1>&2 + echo " ${notsupp}" 1>&2 + echo " (Any other directories should still work fine.)" 1>&2 +fi + +case "$host" in + *msdosdjgpp*) + enable_gdbtk=no ;; +esac + +copy_dirs= + +# Handle --with-headers=XXX. If the value is not "yes", the contents of +# the named directory are copied to $(tooldir)/sys-include. +if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then + if test x${is_cross_compiler} = xno ; then + echo 1>&2 '***' --with-headers is only supported when cross compiling + exit 1 + fi + if test x"${with_headers}" != xyes ; then + case "${exec_prefixoption}" in + "") x=${prefix} ;; + *) x=${exec_prefix} ;; + esac + copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/sys-include" + fi +fi + +# Handle --with-libs=XXX. If the value is not "yes", the contents of +# the name directories are copied to $(tooldir)/lib. Multiple directories +# are permitted. +if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then + if test x${is_cross_compiler} = xno ; then + echo 1>&2 '***' --with-libs is only supported when cross compiling + exit 1 + fi + if test x"${with_libs}" != xyes ; then + # Copy the libraries in reverse order, so that files in the first named + # library override files in subsequent libraries. + case "${exec_prefixoption}" in + "") x=${prefix} ;; + *) x=${exec_prefix} ;; + esac + for l in ${with_libs}; do + copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}" + done + fi +fi + +# Handle ${copy_dirs} +set fnord ${copy_dirs} +shift +while test $# != 0 ; do + if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then + : + else + echo Copying $1 to $2 + + # Use the install script to create the directory and all required + # parent directories. + if test -d $2 ; then + : + else + echo >config.temp + ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED + fi + + # Copy the directory, assuming we have tar. + # FIXME: Should we use B in the second tar? Not all systems support it. + (cd $1; tar -cf - .) | (cd $2; tar -xpf -) + + # It is the responsibility of the user to correctly adjust all + # symlinks. If somebody can figure out how to handle them correctly + # here, feel free to add the code. + + echo $1 > $2/COPIED + fi + shift; shift +done + +extra_arflags_for_target= +extra_nmflags_for_target= +extra_ranlibflags_for_target= +target_makefile_frag=/dev/null +case "${target}" in + i[3456789]86-*-netware*) + target_makefile_frag="config/mt-netware" + ;; + powerpc-*-netware*) + target_makefile_frag="config/mt-netware" + ;; + *-*-linux*) + target_makefile_frag="config/mt-linux" + ;; + *-*-aix4.[3456789]* | *-*-aix[56789].*) + # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm + # commands to handle both 32-bit and 64-bit objects. These flags are + # harmless if we're using GNU nm or ar. + extra_arflags_for_target=" -X32_64" + extra_nmflags_for_target=" -B -X32_64" + ;; + *-*-darwin*) + # ranlib from Darwin requires the -c flag to look at common symbols. + extra_ranlibflags_for_target=" -c" + ;; + mips*-*-pe | sh*-*-pe | *arm-wince-pe) + target_makefile_frag="config/mt-wince" + ;; +esac + +alphaieee_frag=/dev/null +case $target in + alpha*-*-*) + # This just makes sure to use the -mieee option to build target libs. + # This should probably be set individually by each library. + alphaieee_frag="config/mt-alphaieee" + ;; +esac + # If --enable-target-optspace always use -Os instead of -O2 to build # the target libraries, similarly if it is not specified, use -Os # on selected platforms. @@ -2011,7 +2578,7 @@ fi # Default to using --with-stabs for certain targets. if test x${with_stabs} = x ; then case "${target}" in - mips*-*-irix6*) + mips*-*-irix[56]*) ;; mips*-*-* | alpha*-*-osf*) with_stabs=yes; @@ -2028,281 +2595,119 @@ case "${host}" in ;; esac -# If we aren't going to be using gcc, see if we can extract a definition -# of CC from the fragment. -# Actually, use the 'pre-extracted' version above. -if test -z "${CC}" && test "${build}" = "${host}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - found= - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc; then - found=yes - break - fi - done - IFS="$save_ifs" - if test -z "${found}" && test -n "${tentative_cc}" ; then - CC=$tentative_cc - fi -fi - # Some systems (e.g., one of the i386-aix systems the gas testers are # using) don't handle "\$" correctly, so don't use it here. tooldir='${exec_prefix}'/${target_alias} build_tooldir=${tooldir} -# Generate a default definition for YACC. This is used if the makefile can't -# locate bison or byacc in objdir. - -for prog in 'bison -y' byacc yacc -do - set dummy $prog; tmp=$2 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/$tmp; then - DEFAULT_YACC="$prog" - break - fi - done - IFS="$save_ifs" - - test -n "$DEFAULT_YACC" && break -done - -# Generate a default definition for M4. This is used if the makefile can't -# locate m4 in objdir. - -for prog in gm4 gnum4 m4 +# Generate default definitions for YACC, M4, LEX. These are used if the +# Makefile can't locate these programs in objdir. +MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing +for ac_prog in 'bison -y' byacc yacc do - set dummy $prog; tmp=$2 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/$tmp; then - DEFAULT_M4="$prog" +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2612: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$DEFAULT_YACC"; then + ac_cv_prog_DEFAULT_YACC="$DEFAULT_YACC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_DEFAULT_YACC="$ac_prog" break fi done - IFS="$save_ifs" + IFS="$ac_save_ifs" +fi +fi +DEFAULT_YACC="$ac_cv_prog_DEFAULT_YACC" +if test -n "$DEFAULT_YACC"; then + echo "$ac_t""$DEFAULT_YACC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi - test -n "$DEFAULT_M4" && break +test -n "$DEFAULT_YACC" && break done +test -n "$DEFAULT_YACC" || DEFAULT_YACC="$MISSING bison" -# Generate a default definition for LEX. This is used if the makefile can't -# locate flex in objdir. - -for prog in flex lex +for ac_prog in gm4 gnum4 m4 do - set dummy $prog; tmp=$2 - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/$tmp; then - DEFAULT_LEX="$prog" +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2647: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$DEFAULT_M4"; then + ac_cv_prog_DEFAULT_M4="$DEFAULT_M4" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_DEFAULT_M4="$ac_prog" break fi done - IFS="$save_ifs" + IFS="$ac_save_ifs" +fi +fi +DEFAULT_M4="$ac_cv_prog_DEFAULT_M4" +if test -n "$DEFAULT_M4"; then + echo "$ac_t""$DEFAULT_M4" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi - test -n "$DEFAULT_LEX" && break +test -n "$DEFAULT_M4" && break done +test -n "$DEFAULT_M4" || DEFAULT_M4="$MISSING m4" -if test "${build}" != "${host}" ; then - # If we are doing a Canadian Cross, in which the host and build systems - # are not the same, we set reasonable default values for the tools. - - BISON=${BISON-bison} - CC=${CC-${host_alias}-gcc} - CFLAGS=${CFLAGS-"-g -O2"} - CXX=${CXX-${host_alias}-c++} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - CC_FOR_BUILD=${CC_FOR_BUILD-gcc} - CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} - CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} - GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj} - GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} - BUILD_PREFIX=${build_alias}- - BUILD_PREFIX_1=${build_alias}- - MAKEINFO=${MAKEINFO-makeinfo} - - if test -z "${YACC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/bison; then - YACC="bison -y" - break - fi - if test -f $dir/byacc; then - YACC=byacc - break - fi - if test -f $dir/yacc; then - YACC=yacc - break - fi - done - IFS="$save_ifs" - if test -z "${YACC}" ; then - YACC="bison -y" - fi - fi - - if test -z "${LEX}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/flex; then - LEX=flex - break - fi - if test -f $dir/lex; then - LEX=lex - break - fi - done - IFS="$save_ifs" - LEX=${LEX-flex} - fi - +for ac_prog in flex lex +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2682: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - # Set reasonable default values for some tools even if not Canadian. - # Of course, these are different reasonable default values, originally - # specified directly in the Makefile. - # We don't export, so that autoconf can do its job. - # Note that all these settings are above the fragment inclusion point - # in Makefile.in, so can still be overridden by fragments. - # This is all going to change when we autoconfiscate... - - BISON="\$(USUAL_BISON)" - CC_FOR_BUILD="\$(CC)" - GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" - BUILD_PREFIX= - BUILD_PREFIX_1=loser- - MAKEINFO="\$(USUAL_MAKEINFO)" - LEX="\$(USUAL_LEX)" - YACC="\$(USUAL_YACC)" - - # If CC is still not set, try to get gcc. - cc_prog_is_gcc= - if test -z "${CC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc; then - CC="gcc" - cc_prog_is_gcc=yes - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - break - fi - done - IFS="$save_ifs" - CC=${CC-cc} - else - # Determine if we are using gcc. - cat > conftest.c </dev/null 2>&1; then - cc_prog_is_gcc=yes - fi - rm -f conftest.c - if test -z "${CFLAGS}"; then - # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC - # is set to a version of gcc. - if test "$cc_prog_is_gcc" = yes; then - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - fi - fi - fi - - # We must set the default linker to the linker used by gcc for the correct - # operation of libtool. If LD is not defined and we are using gcc, try to - # set the LD default to the ld used by gcc. - if test -z "$LD"; then - if test "$cc_prog_is_gcc" = yes; then - case $build in - *-*-mingw*) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; - *) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; - esac - case $gcc_prog_ld in - # Accept absolute paths. - [\\/]* | [A-Za-z]:[\\/]*) - LD="$gcc_prog_ld" ;; - esac + if test -n "$DEFAULT_LEX"; then + ac_cv_prog_DEFAULT_LEX="$DEFAULT_LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_DEFAULT_LEX="$ac_prog" + break fi - fi - - CXX=${CXX-"c++"} - CFLAGS=${CFLAGS-"-g"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} + done + IFS="$ac_save_ifs" fi - -# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest) -# Set up the list of links to be made. -# ${links} is the list of link names, and ${files} is the list of names to link to. - -# Make the links. -configlinks="${links}" -if test -r ./config.status ; then - mv -f ./config.status ./config.back fi -while test -n "${files}" ; do - # set file to car of files, files to cdr of files - set ${files}; file=$1; shift; files=$* - set ${links}; link=$1; shift; links=$* - - if test ! -r ${srcdir}/${file} ; then - if test ! -r ${file} ; then - echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2 - echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2 - exit 1 - else - srcfile=${file} - fi - else - srcfile=${srcdir}/${file} - fi - - ${remove} -f ${link} - # Make a symlink if possible, otherwise try a hard link - if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then - true - else - # We need to re-remove the file because Lynx leaves a - # very strange directory there when it fails an NFS symlink. - ${remove} -r -f ${link} - ${hard_link} ${srcfile} ${link} - fi - if test ! -r ${link} ; then - echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2 - exit 1 - fi +DEFAULT_LEX="$ac_cv_prog_DEFAULT_LEX" +if test -n "$DEFAULT_LEX"; then + echo "$ac_t""$DEFAULT_LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi - echo "Linked \"${link}\" to \"${srcfile}\"." +test -n "$DEFAULT_LEX" && break done +test -n "$DEFAULT_LEX" || DEFAULT_LEX="$MISSING flex" + # Create a .gdbinit file which runs the one in srcdir # and tells GDB to look there for source files. @@ -2534,21 +2939,21 @@ serialization_dependencies=serdep.tmp # at the end of the argument list. # These will be expanded by make, so quote '$'. cat <<\EOF_SED > conftestsed -s/ --no[^ ]* / / -s/ --c[a-z-]*[= ][^ ]* / / -s/ --sr[a-z-]*[= ][^ ]* / / -s/ --ho[a-z-]*[= ][^ ]* / / -s/ --bu[a-z-]*[= ][^ ]* / / -s/ --t[a-z-]*[= ][^ ]* / / -s/ --program-[pst][a-z-]*[= ][^ ]* / / -s/ -cache-file[= ][^ ]* / / -s/ -srcdir[= ][^ ]* / / -s/ -host[= ][^ ]* / / -s/ -build[= ][^ ]* / / -s/ -target[= ][^ ]* / / -s/ -program-prefix[= ][^ ]* / / -s/ -program-suffix[= ][^ ]* / / -s/ -program-transform-name[= ][^ ]* / / +s/ --no[^ ]*/ /g +s/ --c[a-z-]*[= ][^ ]*//g +s/ --sr[a-z-]*[= ][^ ]*//g +s/ --ho[a-z-]*[= ][^ ]*//g +s/ --bu[a-z-]*[= ][^ ]*//g +s/ --t[a-z-]*[= ][^ ]*//g +s/ --program-[pst][a-z-]*[= ][^ ]*//g +s/ -cache-file[= ][^ ]*//g +s/ -srcdir[= ][^ ]*//g +s/ -host[= ][^ ]*//g +s/ -build[= ][^ ]*//g +s/ -target[= ][^ ]*//g +s/ -program-prefix[= ][^ ]*//g +s/ -program-suffix[= ][^ ]*//g +s/ -program-transform-name[= ][^ ]*//g s/ [^' -][^ ]* / / s/^ *//;s/ *$// s,\$,$$,g @@ -2590,7 +2995,7 @@ esac # Host dirs don't like to share a cache file either, horribly enough. # This seems to be due to autoconf 2.5x stupidity. -host_configargs="--cache-file=config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}" +host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}" target_configargs=${baseargs} @@ -2624,7 +3029,7 @@ fi # directory. I think. # Pass the appropriate --host, --build, and --cache-file arguments. -target_configargs="--cache-file=config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" +target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" # provide a proper gxx_include_dir. # Note, if you change the default, make sure to fix both here and in @@ -2805,7 +3210,6 @@ ospace_frag=${srcdir}/${ospace_frag} - # Build module lists & subconfigure args. @@ -2837,7 +3241,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2841: checking for $ac_word" >&5 +echo "configure:3245: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2870,7 +3274,7 @@ if test -z "$ac_cv_prog_AR" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2874: checking for $ac_word" >&5 +echo "configure:3278: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2909,7 +3313,7 @@ fi # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2913: checking for $ac_word" >&5 +echo "configure:3317: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2942,7 +3346,7 @@ if test -z "$ac_cv_prog_AS" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2946: checking for $ac_word" >&5 +echo "configure:3350: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2981,7 +3385,7 @@ fi # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2985: checking for $ac_word" >&5 +echo "configure:3389: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3014,7 +3418,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3018: checking for $ac_word" >&5 +echo "configure:3422: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3053,7 +3457,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3057: checking for $ac_word" >&5 +echo "configure:3461: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3086,7 +3490,7 @@ if test -z "$ac_cv_prog_LD" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3090: checking for $ac_word" >&5 +echo "configure:3494: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3125,7 +3529,7 @@ fi # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3129: checking for $ac_word" >&5 +echo "configure:3533: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3158,7 +3562,7 @@ if test -z "$ac_cv_prog_NM" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3162: checking for $ac_word" >&5 +echo "configure:3566: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3197,7 +3601,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3201: checking for $ac_word" >&5 +echo "configure:3605: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3230,7 +3634,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3234: checking for $ac_word" >&5 +echo "configure:3638: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3269,7 +3673,7 @@ fi # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3273: checking for $ac_word" >&5 +echo "configure:3677: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3302,7 +3706,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3306: checking for $ac_word" >&5 +echo "configure:3710: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3341,7 +3745,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args. set dummy ${ncn_tool_prefix}objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3345: checking for $ac_word" >&5 +echo "configure:3749: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3374,7 +3778,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then # Extract the first word of "objcopy", so it can be a program name with args. set dummy objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3378: checking for $ac_word" >&5 +echo "configure:3782: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3413,7 +3817,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args. set dummy ${ncn_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3417: checking for $ac_word" >&5 +echo "configure:3821: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3446,7 +3850,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3450: checking for $ac_word" >&5 +echo "configure:3854: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3495,504 +3899,504 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3499: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then +echo "configure:3903: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AR_FOR_TARGET"; then - ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_AR_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_AR_FOR_TARGET="$CONFIGURED_AR_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" + ac_cv_prog_CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" break fi done IFS="$ac_save_ifs" fi fi -AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET" -if test -n "$AR_FOR_TARGET"; then - echo "$ac_t""$AR_FOR_TARGET" 1>&6 +CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" +if test -n "$CONFIGURED_AR_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_AR_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_AR_FOR_TARGET=$AR_FOR_TARGET + ncn_cv_CONFIGURED_AR_FOR_TARGET=$CONFIGURED_AR_FOR_TARGET # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3532: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then +echo "configure:3936: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_AR_FOR_TARGET"; then - ac_cv_prog_ncn_cv_AR_FOR_TARGET="$ncn_cv_AR_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="$ncn_cv_CONFIGURED_AR_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar" + ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_AR_FOR_TARGET="ar" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET="ar" fi fi -ncn_cv_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_AR_FOR_TARGET" -if test -n "$ncn_cv_AR_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_AR_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_AR_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_AR_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - AR_FOR_TARGET=$ncn_cv_AR_FOR_TARGET + CONFIGURED_AR_FOR_TARGET=$ncn_cv_CONFIGURED_AR_FOR_TARGET else - AR_FOR_TARGET="${ncn_target_tool_prefix}ar" + CONFIGURED_AR_FOR_TARGET="${ncn_target_tool_prefix}ar" fi else - AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET" + CONFIGURED_AR_FOR_TARGET="$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3571: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then +echo "configure:3975: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AS_FOR_TARGET"; then - ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_AS_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_AS_FOR_TARGET="$CONFIGURED_AS_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}as" + ac_cv_prog_CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as" break fi done IFS="$ac_save_ifs" fi fi -AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET" -if test -n "$AS_FOR_TARGET"; then - echo "$ac_t""$AS_FOR_TARGET" 1>&6 +CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" +if test -n "$CONFIGURED_AS_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_AS_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_AS_FOR_TARGET=$AS_FOR_TARGET + ncn_cv_CONFIGURED_AS_FOR_TARGET=$CONFIGURED_AS_FOR_TARGET # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3604: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4008: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_AS_FOR_TARGET"; then - ac_cv_prog_ncn_cv_AS_FOR_TARGET="$ncn_cv_AS_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="$ncn_cv_CONFIGURED_AS_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_AS_FOR_TARGET="as" + ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_AS_FOR_TARGET="as" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET="as" fi fi -ncn_cv_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_AS_FOR_TARGET" -if test -n "$ncn_cv_AS_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_AS_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_AS_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_AS_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - AS_FOR_TARGET=$ncn_cv_AS_FOR_TARGET + CONFIGURED_AS_FOR_TARGET=$ncn_cv_CONFIGURED_AS_FOR_TARGET else - AS_FOR_TARGET="${ncn_target_tool_prefix}as" + CONFIGURED_AS_FOR_TARGET="${ncn_target_tool_prefix}as" fi else - AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET" + CONFIGURED_AS_FOR_TARGET="$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3643: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4047: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$DLLTOOL_FOR_TARGET"; then - ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="$CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" + ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" break fi done IFS="$ac_save_ifs" fi fi -DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET" -if test -n "$DLLTOOL_FOR_TARGET"; then - echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6 +CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" +if test -n "$CONFIGURED_DLLTOOL_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET + ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET=$CONFIGURED_DLLTOOL_FOR_TARGET # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3676: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4080: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then - ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="$ncn_cv_DLLTOOL_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool" + ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET="dlltool" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="dlltool" fi fi -ncn_cv_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET" -if test -n "$ncn_cv_DLLTOOL_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_DLLTOOL_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - DLLTOOL_FOR_TARGET=$ncn_cv_DLLTOOL_FOR_TARGET + CONFIGURED_DLLTOOL_FOR_TARGET=$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET else - DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" + CONFIGURED_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}dlltool" fi else - DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET" + CONFIGURED_DLLTOOL_FOR_TARGET="$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3715: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4119: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$LD_FOR_TARGET"; then - ac_cv_prog_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_LD_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_LD_FOR_TARGET="$CONFIGURED_LD_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" + ac_cv_prog_CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" break fi done IFS="$ac_save_ifs" fi fi -LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET" -if test -n "$LD_FOR_TARGET"; then - echo "$ac_t""$LD_FOR_TARGET" 1>&6 +CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" +if test -n "$CONFIGURED_LD_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_LD_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_LD_FOR_TARGET=$LD_FOR_TARGET + ncn_cv_CONFIGURED_LD_FOR_TARGET=$CONFIGURED_LD_FOR_TARGET # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3748: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4152: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_LD_FOR_TARGET"; then - ac_cv_prog_ncn_cv_LD_FOR_TARGET="$ncn_cv_LD_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="$ncn_cv_CONFIGURED_LD_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld" + ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_LD_FOR_TARGET="ld" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET="ld" fi fi -ncn_cv_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_LD_FOR_TARGET" -if test -n "$ncn_cv_LD_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_LD_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_LD_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_LD_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - LD_FOR_TARGET=$ncn_cv_LD_FOR_TARGET + CONFIGURED_LD_FOR_TARGET=$ncn_cv_CONFIGURED_LD_FOR_TARGET else - LD_FOR_TARGET="${ncn_target_tool_prefix}ld" + CONFIGURED_LD_FOR_TARGET="${ncn_target_tool_prefix}ld" fi else - LD_FOR_TARGET="$ac_cv_prog_LD_FOR_TARGET" + CONFIGURED_LD_FOR_TARGET="$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3787: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4191: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$NM_FOR_TARGET"; then - ac_cv_prog_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_NM_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_NM_FOR_TARGET="$CONFIGURED_NM_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" + ac_cv_prog_CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" break fi done IFS="$ac_save_ifs" fi fi -NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET" -if test -n "$NM_FOR_TARGET"; then - echo "$ac_t""$NM_FOR_TARGET" 1>&6 +CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" +if test -n "$CONFIGURED_NM_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_NM_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_NM_FOR_TARGET=$NM_FOR_TARGET + ncn_cv_CONFIGURED_NM_FOR_TARGET=$CONFIGURED_NM_FOR_TARGET # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3820: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4224: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_NM_FOR_TARGET"; then - ac_cv_prog_ncn_cv_NM_FOR_TARGET="$ncn_cv_NM_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="$ncn_cv_CONFIGURED_NM_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm" + ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_NM_FOR_TARGET="nm" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET="nm" fi fi -ncn_cv_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_NM_FOR_TARGET" -if test -n "$ncn_cv_NM_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_NM_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_NM_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_NM_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - NM_FOR_TARGET=$ncn_cv_NM_FOR_TARGET + CONFIGURED_NM_FOR_TARGET=$ncn_cv_CONFIGURED_NM_FOR_TARGET else - NM_FOR_TARGET="${ncn_target_tool_prefix}nm" + CONFIGURED_NM_FOR_TARGET="${ncn_target_tool_prefix}nm" fi else - NM_FOR_TARGET="$ac_cv_prog_NM_FOR_TARGET" + CONFIGURED_NM_FOR_TARGET="$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3859: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4263: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$RANLIB_FOR_TARGET"; then - ac_cv_prog_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="$CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib" + ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET="${ncn_target_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi -RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET" -if test -n "$RANLIB_FOR_TARGET"; then - echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6 +CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" +if test -n "$CONFIGURED_RANLIB_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_RANLIB_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET + ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=$CONFIGURED_RANLIB_FOR_TARGET # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3892: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4296: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then - ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="$ncn_cv_RANLIB_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET="ranlib" + ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="ranlib" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET=":" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET=":" fi fi -ncn_cv_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET" -if test -n "$ncn_cv_RANLIB_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_RANLIB_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - RANLIB_FOR_TARGET=$ncn_cv_RANLIB_FOR_TARGET + CONFIGURED_RANLIB_FOR_TARGET=$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET else - RANLIB_FOR_TARGET=":" + CONFIGURED_RANLIB_FOR_TARGET=":" fi else - RANLIB_FOR_TARGET="$ac_cv_prog_RANLIB_FOR_TARGET" + CONFIGURED_RANLIB_FOR_TARGET="$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" fi if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3931: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4335: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$WINDRES_FOR_TARGET"; then - ac_cv_prog_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test. + if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then + ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="$CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" + ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" break fi done IFS="$ac_save_ifs" fi fi -WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET" -if test -n "$WINDRES_FOR_TARGET"; then - echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6 +CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" +if test -n "$CONFIGURED_WINDRES_FOR_TARGET"; then + echo "$ac_t""$CONFIGURED_WINDRES_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi fi -if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then +if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then if test $build = $target ; then - ncn_cv_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET + ncn_cv_CONFIGURED_WINDRES_FOR_TARGET=$CONFIGURED_WINDRES_FOR_TARGET # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3964: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then +echo "configure:4368: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then - ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="$ncn_cv_WINDRES_FOR_TARGET" # Let the user override the test. + if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then + ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres" + ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET="windres" + test -z "$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" && ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="windres" fi fi -ncn_cv_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET" -if test -n "$ncn_cv_WINDRES_FOR_TARGET"; then - echo "$ac_t""$ncn_cv_WINDRES_FOR_TARGET" 1>&6 +ncn_cv_CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" +if test -n "$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET"; then + echo "$ac_t""$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET" 1>&6 else echo "$ac_t""no" 1>&6 fi - WINDRES_FOR_TARGET=$ncn_cv_WINDRES_FOR_TARGET + CONFIGURED_WINDRES_FOR_TARGET=$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET else - WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" + CONFIGURED_WINDRES_FOR_TARGET="${ncn_target_tool_prefix}windres" fi else - WINDRES_FOR_TARGET="$ac_cv_prog_WINDRES_FOR_TARGET" + CONFIGURED_WINDRES_FOR_TARGET="$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" fi @@ -4020,14 +4424,31 @@ if test "x${build}" = "x${host}" ; then NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)" RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)" WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)" +else + # Just use the ones we found. + AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)" + AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)" + DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)" + LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)" + NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)" + RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)" + WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)" fi + + + + + + + + # Certain tools may need extra flags. AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:4031: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4452: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4048,6 +4469,44 @@ else fi MAINT=$MAINTAINER_MODE_TRUE +# --------------------- +# GCC bootstrap support +# --------------------- + +# Stage specific cflags for build. +stage1_cflags="-g" +case $build in + vax-*-*) + case ${GCC} in + yes) stage1_cflags="-g -Wa,-J" ;; + *) stage1_cflags="-g -J" ;; + esac ;; + powerpc-*-darwin*) + # The spiffy cpp-precomp chokes on some legitimate constructs in GCC + # sources; use -no-cpp-precomp to get to GNU cpp. + # Apple's GCC has bugs in designated initializer handling, so disable + # that too. + stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0" + ;; +esac + + +# Enable -Werror in bootstrap stage2 and later. +# Change the default to "no" on release branches. +# Check whether --enable-werror or --disable-werror was given. +if test "${enable_werror+set}" = set; then + enableval="$enable_werror" + : +else + enable_werror=yes +fi + +case ${enable_werror} in + yes) stage2_werror_flag="--enable-werror-always" ;; + *) stage2_werror_flag="" ;; +esac + + trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure @@ -4215,6 +4674,12 @@ s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g s%@build_subdir@%$build_subdir%g s%@host_subdir@%$host_subdir%g s%@target_subdir@%$target_subdir%g +s%@CC@%$CC%g +s%@GNATBIND@%$GNATBIND%g +s%@stage1_languages@%$stage1_languages%g +s%@DEFAULT_YACC@%$DEFAULT_YACC%g +s%@DEFAULT_M4@%$DEFAULT_M4%g +s%@DEFAULT_LEX@%$DEFAULT_LEX%g /@maybe_dependencies@/r $maybe_dependencies s%@maybe_dependencies@%%g /@serialization_dependencies@/r $serialization_dependencies @@ -4231,7 +4696,6 @@ s%@SET_LIB_PATH@%$SET_LIB_PATH%g s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g s%@BUILD_PREFIX@%$BUILD_PREFIX%g s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g -s%@configlinks@%$configlinks%g s%@gcc_version_trigger@%$gcc_version_trigger%g s%@gcc_version@%$gcc_version%g s%@tooldir@%$tooldir%g @@ -4270,26 +4734,22 @@ s%@OBJCOPY@%$OBJCOPY%g s%@ncn_cv_OBJCOPY@%$ncn_cv_OBJCOPY%g s%@OBJDUMP@%$OBJDUMP%g s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g -s%@CC@%$CC%g s%@CXX@%$CXX%g s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g -s%@DEFAULT_YACC@%$DEFAULT_YACC%g -s%@DEFAULT_LEX@%$DEFAULT_LEX%g -s%@DEFAULT_M4@%$DEFAULT_M4%g -s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g -s%@ncn_cv_AR_FOR_TARGET@%$ncn_cv_AR_FOR_TARGET%g -s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g -s%@ncn_cv_AS_FOR_TARGET@%$ncn_cv_AS_FOR_TARGET%g -s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g -s%@ncn_cv_DLLTOOL_FOR_TARGET@%$ncn_cv_DLLTOOL_FOR_TARGET%g -s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g -s%@ncn_cv_LD_FOR_TARGET@%$ncn_cv_LD_FOR_TARGET%g -s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g -s%@ncn_cv_NM_FOR_TARGET@%$ncn_cv_NM_FOR_TARGET%g -s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g -s%@ncn_cv_RANLIB_FOR_TARGET@%$ncn_cv_RANLIB_FOR_TARGET%g -s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g -s%@ncn_cv_WINDRES_FOR_TARGET@%$ncn_cv_WINDRES_FOR_TARGET%g +s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_AR_FOR_TARGET@%$ncn_cv_CONFIGURED_AR_FOR_TARGET%g +s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_AS_FOR_TARGET@%$ncn_cv_CONFIGURED_AS_FOR_TARGET%g +s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET@%$ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET%g +s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_LD_FOR_TARGET@%$ncn_cv_CONFIGURED_LD_FOR_TARGET%g +s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_NM_FOR_TARGET@%$ncn_cv_CONFIGURED_NM_FOR_TARGET%g +s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_RANLIB_FOR_TARGET@%$ncn_cv_CONFIGURED_RANLIB_FOR_TARGET%g +s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g +s%@ncn_cv_CONFIGURED_WINDRES_FOR_TARGET@%$ncn_cv_CONFIGURED_WINDRES_FOR_TARGET%g s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g @@ -4298,9 +4758,18 @@ s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g +s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g +s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g +s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g +s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g +s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g +s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g +s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g +s%@stage1_cflags@%$stage1_cflags%g +s%@stage2_werror_flag@%$stage2_werror_flag%g CEOF EOF