X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=configure;h=cadb668dd793bdd6ecc113b1ecff1ba830b7da2d;hb=165178fb0a08625f9df3deb2ecb9be978ea52c1f;hp=9a30a396c4c8029d481b6407553b7cd740006cdb;hpb=6783d878387d2474d8a694d0b0eb8f7257e15963;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/configure b/configure
index 9a30a396c4c..cadb668dd79 100755
--- a/configure
+++ b/configure
@@ -881,7 +881,7 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -1294,7 +1294,7 @@ case "${target}" in
     ;;
   bfin-*-*)
     noconfigdirs="$noconfigdirs target-libgloss gdb"
-    if  x${is_cross_compiler} != xno  ; then
+    if test x${is_cross_compiler} != xno ; then
       target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
     ;;
@@ -1475,7 +1475,7 @@ case "${target}" in
   mn10300-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  ms1-*-*)
+  mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   powerpc-*-aix*)
@@ -1759,6 +1759,12 @@ case "${host}" in
   powerpc-*-darwin*)
     host_makefile_frag="config/mh-ppc-darwin"
     ;;
+  powerpc-*-aix*)
+    host_makefile_frag="config/mh-ppc-aix"
+    ;;
+  rs6000-*-aix*)
+    host_makefile_frag="config/mh-ppc-aix"
+    ;;
   *-*-lynxos*)
     # /bin/cc is less than useful for our purposes.  Always use GCC
     tentative_cc="/bin/gcc"
@@ -1821,7 +1827,7 @@ else
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1825: checking for $ac_word" >&5
+echo "configure:1831: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1851,7 +1857,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1855: checking for $ac_word" >&5
+echo "configure:1861: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1902,7 +1908,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1906: checking for $ac_word" >&5
+echo "configure:1912: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1934,7 +1940,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1944: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1945,12 +1951,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1949 "configure"
+#line 1955 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1976,12 +1982,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1980: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1986: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1985: checking whether we are using GNU C" >&5
+echo "configure:1991: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1990,7 +1996,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2000: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2009,7 +2015,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2013: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2019: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2076,7 +2082,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2080: checking for $ac_word" >&5
+echo "configure:2086: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2108,7 +2114,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2112: checking for $ac_word" >&5
+echo "configure:2118: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2141,7 +2147,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2145: checking whether compiler driver understands Ada" >&5
+echo "configure:2151: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2173,7 +2179,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2177: checking how to compare bootstrapped objects" >&5
+echo "configure:2183: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2271,9 +2277,9 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2275: checking for correct version of gmp.h" >&5
+echo "configure:2281: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2277 "configure"
+#line 2283 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2284,7 +2290,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2294: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2297,12 +2303,12 @@ rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
   echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2301: checking for MPFR" >&5
+echo "configure:2307: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2306 "configure"
+#line 2312 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
@@ -2310,7 +2316,7 @@ int main() {
 mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2816,221 +2822,6 @@ esac
 tooldir='${exec_prefix}'/${target_alias}
 build_tooldir=${tooldir}
 
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine.  These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-for ac_prog in bison
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2829: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_BISON"; then
-  ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_BISON="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
-if test -n "$CONFIGURED_BISON"; then
-  echo "$ac_t""$CONFIGURED_BISON" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_BISON" && break
-done
-test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
-
-for ac_prog in 'bison -y' byacc yacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2864: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_YACC"; then
-  ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_YACC="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
-if test -n "$CONFIGURED_YACC"; then
-  echo "$ac_t""$CONFIGURED_YACC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_YACC" && break
-done
-test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
-
-for ac_prog in gm4 gnum4 m4
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2899: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_M4"; then
-  ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_M4="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
-if test -n "$CONFIGURED_M4"; then
-  echo "$ac_t""$CONFIGURED_M4" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_M4" && break
-done
-test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
-
-for ac_prog in flex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2934: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_FLEX"; then
-  ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
-if test -n "$CONFIGURED_FLEX"; then
-  echo "$ac_t""$CONFIGURED_FLEX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_FLEX" && break
-done
-test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
-
-for ac_prog in flex lex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2969: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_LEX"; then
-  ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_LEX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
-if test -n "$CONFIGURED_LEX"; then
-  echo "$ac_t""$CONFIGURED_LEX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_LEX" && break
-done
-test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
-
-for ac_prog in makeinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3004: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_MAKEINFO"; then
-  ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
-if test -n "$CONFIGURED_MAKEINFO"; then
-  echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_MAKEINFO" && break
-done
-test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
-
-
 # Create a .gdbinit file which runs the one in srcdir
 # and tells GDB to look there for source files.
 
@@ -3133,6 +2924,8 @@ case "$enable_gdbtk" in
     fi
     ;;
 esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 
 # Strip out unwanted targets.
 
@@ -3165,11 +2958,10 @@ esac
 case "$have_compiler:$host:$target:$enable_bootstrap" in
   *:*:*:no) ;;
 
-  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # Default behavior.  Enable bootstrap if we have a compiler
   # and we are in a native configuration.
   yes:$build:$build:default)
-    # This will become 'yes'
-    enable_bootstrap=no ;;
+    enable_bootstrap=yes ;;
 
   *:*:*:default)
     enable_bootstrap=no ;;
@@ -3220,10 +3012,13 @@ for module in ${build_configdirs} ; do
 /^@endif build-$module-$bootstrap_suffix\$/d"
 done
 for module in ${configdirs} ; do
-  if test -z "${no_recursion}" \
-     && test -f ${module}/Makefile; then
-    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
-    rm -f ${module}/Makefile
+  if test -z "${no_recursion}"; then
+    for file in stage*-${module}/Makefile ${module}/Makefile; do
+      if test -f ${file}; then
+	echo 1>&2 "*** removing ${file} to force reconfigure"
+	rm -f ${file}
+      fi
+    done
   fi
   extrasub="$extrasub
 /^@if $module\$/d
@@ -3494,6 +3289,8 @@ done
 
 
 
+
+
 # Build module lists & subconfigure args.
 
 
@@ -3510,145 +3307,483 @@ done
 
 
 
-# Host tools.
-ncn_tool_prefix=
-test -n "$host_alias" && ncn_tool_prefix=$host_alias-
-ncn_target_tool_prefix=
-test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine.  These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
 
- for ncn_progname in ar; do
-  if test -n "$ncn_tool_prefix"; then
-    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+for ac_prog in 'bison -y' byacc yacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3525: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3318: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+      ac_cv_prog_YACC="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+  echo "$ac_t""$YACC" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-  fi
-  if test -z "$ac_cv_prog_AR" && test $build = $host ; then
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+  *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+  *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3556: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3358: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
+  if test -n "$BISON"; then
+  ac_cv_prog_BISON="$BISON" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ncn_progname}"
+      ac_cv_prog_BISON="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+  echo "$ac_t""$BISON" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
- 
-  fi
-  test -n "$ac_cv_prog_AR" && break
+
+test -n "$BISON" && break
 done
+test -n "$BISON" || BISON="$MISSING bison"
 
-if test -z "$ac_cv_prog_AR" ; then
-  set dummy ar
-  if test $build = $host ; then
-    AR="$2"
-  else
-    AR="${ncn_tool_prefix}$2"
-  fi
-fi
+case " $build_configdirs " in
+  *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
 
- for ncn_progname in as; do
-  if test -n "$ncn_tool_prefix"; then
-    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+for ac_prog in gm4 gnum4 m4
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:3397: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
+  if test -n "$M4"; then
+  ac_cv_prog_M4="$M4" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+      ac_cv_prog_M4="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
+M4="$ac_cv_prog_M4"
+if test -n "$M4"; then
+  echo "$ac_t""$M4" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-  fi
-  if test -z "$ac_cv_prog_AS" && test $build = $host ; then
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+  *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3631: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:3436: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
+  if test -n "$LEX"; then
+  ac_cv_prog_LEX="$LEX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ncn_progname}"
+      ac_cv_prog_LEX="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
-  echo "$ac_t""$AS" 1>&6
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+  echo "$ac_t""$LEX" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+  *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+  *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3476: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$FLEX"; then
+  ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_FLEX="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+  echo "$ac_t""$FLEX" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+  *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3515: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$MAKEINFO"; then
+  ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_MAKEINFO="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+  echo "$ac_t""$MAKEINFO" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+  *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+  *)
+
+    # For an installed makeinfo, we require it to be from texinfo 4.2 or
+    # higher, else we use the "missing" dummy.
+    if ${MAKEINFO} --version \
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+      :
+    else
+      MAKEINFO="$MISSING makeinfo"
+    fi
+    ;;
+
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+for ac_prog in expect
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3568: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$EXPECT"; then
+  ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_EXPECT="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+EXPECT="$ac_cv_prog_EXPECT"
+if test -n "$EXPECT"; then
+  echo "$ac_t""$EXPECT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+
+case " $configdirs " in
+  *" expect "*)
+    test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+    ;;
+esac
+
+for ac_prog in runtest
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3609: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RUNTEST"; then
+  ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RUNTEST="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RUNTEST="$ac_cv_prog_RUNTEST"
+if test -n "$RUNTEST"; then
+  echo "$ac_t""$RUNTEST" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+
+case " $configdirs " in
+  *" dejagnu "*)
+    test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+    ;;
+esac
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ for ncn_progname in ar; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3657: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3688: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+  set dummy ar
+  if test $build = $host ; then
+    AR="$2"
+  else
+    AR="${ncn_tool_prefix}$2"
+  fi
+fi
+
+ for ncn_progname in as; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3732: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_AS" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3763: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+  echo "$ac_t""$AS" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
@@ -3671,7 +3806,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3675: checking for $ac_word" >&5
+echo "configure:3807: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3702,7 +3837,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3706: checking for $ac_word" >&5
+echo "configure:3838: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3746,7 +3881,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3750: checking for $ac_word" >&5
+echo "configure:3882: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3777,7 +3912,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3781: checking for $ac_word" >&5
+echo "configure:3913: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3816,12 +3951,87 @@ if test -z "$ac_cv_prog_LD" ; then
   fi
 fi
 
+ for ncn_progname in lipo; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3957: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+  echo "$ac_t""$LIPO" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3988: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LIPO="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+  echo "$ac_t""$LIPO" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_LIPO" && break
+done
+
+if test -z "$ac_cv_prog_LIPO" ; then
+  set dummy lipo
+  if test $build = $host ; then
+    LIPO="$2"
+  else
+    LIPO="${ncn_tool_prefix}$2"
+  fi
+fi
+
  for ncn_progname in nm; do
   if test -n "$ncn_tool_prefix"; then
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3825: checking for $ac_word" >&5
+echo "configure:4032: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3852,7 +4062,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3856: checking for $ac_word" >&5
+echo "configure:4063: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3896,7 +4106,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3900: checking for $ac_word" >&5
+echo "configure:4107: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3927,7 +4137,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3931: checking for $ac_word" >&5
+echo "configure:4138: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3961,12 +4171,82 @@ if test -z "$ac_cv_prog_RANLIB" ; then
   RANLIB=":"
 fi
 
+ for ncn_progname in strip; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4177: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4208: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_STRIP" && break
+done
+
+if test -z "$ac_cv_prog_STRIP" ; then
+  STRIP=":"
+fi
+
  for ncn_progname in windres; do
   if test -n "$ncn_tool_prefix"; then
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3970: checking for $ac_word" >&5
+echo "configure:4247: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3997,7 +4277,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4001: checking for $ac_word" >&5
+echo "configure:4278: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4041,7 +4321,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4045: checking for $ac_word" >&5
+echo "configure:4322: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4072,7 +4352,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4076: checking for $ac_word" >&5
+echo "configure:4353: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4116,7 +4396,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4120: checking for $ac_word" >&5
+echo "configure:4397: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4147,7 +4427,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4151: checking for $ac_word" >&5
+echo "configure:4428: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4192,14 +4472,13 @@ fi
 
 
 
-# Target tools.  Do the tests using the names they may have passed in
-# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+# Target tools.
  for ncn_progname in ar; do
   if test -n "$ncn_target_tool_prefix"; then
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4203: checking for $ac_word" >&5
+echo "configure:4479: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4230,7 +4509,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4234: checking for $ac_word" >&5
+echo "configure:4510: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4274,7 +4553,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4278: checking for $ac_word" >&5
+echo "configure:4554: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4305,7 +4584,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4309: checking for $ac_word" >&5
+echo "configure:4585: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4349,7 +4628,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4353: checking for $ac_word" >&5
+echo "configure:4629: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4380,7 +4659,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4384: checking for $ac_word" >&5
+echo "configure:4660: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4424,7 +4703,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4428: checking for $ac_word" >&5
+echo "configure:4704: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4455,7 +4734,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4459: checking for $ac_word" >&5
+echo "configure:4735: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4499,7 +4778,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4503: checking for $ac_word" >&5
+echo "configure:4779: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4530,7 +4809,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4534: checking for $ac_word" >&5
+echo "configure:4810: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4574,7 +4853,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4578: checking for $ac_word" >&5
+echo "configure:4854: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4605,7 +4884,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4609: checking for $ac_word" >&5
+echo "configure:4885: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4644,7 +4923,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4648: checking for $ac_word" >&5
+echo "configure:4924: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4675,7 +4954,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4679: checking for $ac_word" >&5
+echo "configure:4955: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4719,7 +4998,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4723: checking for $ac_word" >&5
+echo "configure:4999: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4750,7 +5029,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4754: checking for $ac_word" >&5
+echo "configure:5030: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4794,7 +5073,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4798: checking for $ac_word" >&5
+echo "configure:5074: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4825,7 +5104,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4829: checking for $ac_word" >&5
+echo "configure:5105: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4869,7 +5148,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4873: checking for $ac_word" >&5
+echo "configure:5149: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4900,7 +5179,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4904: checking for $ac_word" >&5
+echo "configure:5180: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4944,7 +5223,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4948: checking for $ac_word" >&5
+echo "configure:5224: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4975,7 +5254,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4979: checking for $ac_word" >&5
+echo "configure:5255: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5019,7 +5298,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5023: checking for $ac_word" >&5
+echo "configure:5299: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5050,7 +5329,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5054: checking for $ac_word" >&5
+echo "configure:5330: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5094,7 +5373,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5098: checking for $ac_word" >&5
+echo "configure:5374: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5125,7 +5404,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5129: checking for $ac_word" >&5
+echo "configure:5405: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5164,7 +5443,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5168: checking for $ac_word" >&5
+echo "configure:5444: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5195,7 +5474,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5199: checking for $ac_word" >&5
+echo "configure:5475: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5239,7 +5518,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5243: checking for $ac_word" >&5
+echo "configure:5519: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5270,7 +5549,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5274: checking for $ac_word" >&5
+echo "configure:5550: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5310,67 +5589,411 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
 fi
 
 
-CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
-CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
-CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
-CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
-CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
-CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
-CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
-CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
-CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
-CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
-CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
-CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET"
-CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
-CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
-CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
-
-
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
-  # In this case, the newly built tools can and should be used,
-  # so we override the results of the autoconf tests.
-  # This should really only happen when the tools are actually being built,
-  # but that's a further refinement.  The new build scheme, where
-  # tools are built into a structure paralleling where they're installed,
-  # should also eliminate all of this cleanly.
-  AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
-  AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
-  CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
-  CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
-  RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
-  DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
-  GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
-  GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
-  GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
-  LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
-  LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
-  NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
-  OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)"
-  RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
-  STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
-  WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
-else
-  # Just use the ones we found.
-  AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
-  AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
-  CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
-  CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
-  RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
-  DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
-  GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
-  GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
-  GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
-  LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
-  LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
-  NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
-  OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)"
-  RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
-  STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
-  WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"  
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
+echo "configure:5593: checking where to find the target ar" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    AR_FOR_TARGET='$(AR)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
+echo "configure:5618: checking where to find the target as" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gas "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    AS_FOR_TARGET='$(AS)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
+echo "configure:5643: checking where to find the target cc" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    CC_FOR_TARGET='$(CC)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
+echo "configure:5668: checking where to find the target c++" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,c++,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    CXX_FOR_TARGET='$(CXX)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
+echo "configure:5696: checking where to find the target c++ for libstdc++" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,c++,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    RAW_CXX_FOR_TARGET='$(CXX)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
+echo "configure:5724: checking where to find the target dlltool" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    DLLTOOL_FOR_TARGET='$(DLLTOOL)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
+echo "configure:5749: checking where to find the target gcc" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GCC_FOR_TARGET='$()'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
+echo "configure:5774: checking where to find the target gcj" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,java,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GCJ_FOR_TARGET='$(GCJ)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
+echo "configure:5802: checking where to find the target gfortran" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,fortran,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GFORTRAN_FOR_TARGET='$(GFORTRAN)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
+echo "configure:5830: checking where to find the target ld" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" ld "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    LD_FOR_TARGET='$(LD)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
+echo "configure:5855: checking where to find the target lipo" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  if test "x$target" = "x$host"; then
+    # We can use an host tool
+    LIPO_FOR_TARGET='$(LIPO)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
+echo "configure:5870: checking where to find the target nm" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    NM_FOR_TARGET='$(NM)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
 fi
+echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
+echo "configure:5895: checking where to find the target objdump" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    OBJDUMP_FOR_TARGET='$(OBJDUMP)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
+echo "configure:5920: checking where to find the target ranlib" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    RANLIB_FOR_TARGET='$(RANLIB)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
+echo "configure:5945: checking where to find the target strip" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    STRIP_FOR_TARGET='$(STRIP)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
+echo "configure:5970: checking where to find the target windres" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    WINDRES_FOR_TARGET='$(WINDRES)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+
 
 
 
@@ -5379,8 +6002,27 @@ AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+  case " $configdirs " in
+    *" gcc "*)
+      COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+      COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+      COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+      ;;
+  esac
+fi
+
+
+
+
+
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:5384: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6023: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -5427,7 +6069,7 @@ esac
 # gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:5431: checking if symbolic links between directories work" >&5
+echo "configure:6070: checking if symbolic links between directories work" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5651,12 +6293,6 @@ s%@gmplibs@%$gmplibs%g
 s%@gmpinc@%$gmpinc%g
 s%@stage1_languages@%$stage1_languages%g
 s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
-s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
-s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
-s%@CONFIGURED_M4@%$CONFIGURED_M4%g
-s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
-s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
-s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
 s%@bootstrap_lean@%$bootstrap_lean%g
 /@serialization_dependencies@/r $serialization_dependencies
 s%@serialization_dependencies@%%g
@@ -5673,7 +6309,9 @@ s%@BUILD_PREFIX@%$BUILD_PREFIX%g
 s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
 s%@tooldir@%$tooldir%g
 s%@build_tooldir@%$build_tooldir%g
+s%@CONFIGURE_GDB_TK@%$CONFIGURE_GDB_TK%g
 s%@GDB_TK@%$GDB_TK%g
+s%@INSTALL_GDB_TK@%$INSTALL_GDB_TK%g
 s%@build_configargs@%$build_configargs%g
 s%@build_configdirs@%$build_configdirs%g
 s%@host_configargs@%$host_configargs%g
@@ -5682,12 +6320,22 @@ s%@target_configargs@%$target_configargs%g
 s%@target_configdirs@%$target_configdirs%g
 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
 s%@config_shell@%$config_shell%g
+s%@YACC@%$YACC%g
+s%@BISON@%$BISON%g
+s%@M4@%$M4%g
+s%@LEX@%$LEX%g
+s%@FLEX@%$FLEX%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@EXPECT@%$EXPECT%g
+s%@RUNTEST@%$RUNTEST%g
 s%@AR@%$AR%g
 s%@AS@%$AS%g
 s%@DLLTOOL@%$DLLTOOL%g
 s%@LD@%$LD%g
+s%@LIPO@%$LIPO%g
 s%@NM@%$NM%g
 s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
 s%@WINDRES@%$WINDRES%g
 s%@OBJCOPY@%$OBJCOPY%g
 s%@OBJDUMP@%$OBJDUMP%g
@@ -5708,23 +6356,11 @@ s%@OBJDUMP_FOR_TARGET@%$OBJDUMP_FOR_TARGET%g
 s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
 s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
 s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
-s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
-s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
-s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
-s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
-s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@CONFIGURED_LIPO_FOR_TARGET@%$CONFIGURED_LIPO_FOR_TARGET%g
-s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@CONFIGURED_OBJDUMP_FOR_TARGET@%$CONFIGURED_OBJDUMP_FOR_TARGET%g
-s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@CONFIGURED_STRIP_FOR_TARGET@%$CONFIGURED_STRIP_FOR_TARGET%g
-s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
 s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
 s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
+s%@COMPILER_AS_FOR_TARGET@%$COMPILER_AS_FOR_TARGET%g
+s%@COMPILER_LD_FOR_TARGET@%$COMPILER_LD_FOR_TARGET%g
+s%@COMPILER_NM_FOR_TARGET@%$COMPILER_NM_FOR_TARGET%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g