X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=configure;h=592bf91279556240d1228c2ee71c51b9bcf18580;hb=180d03392c4f8b2a357fac57e2bd8d98d58e4e48;hp=fe595163a528adc120c78bf071d2dbab5372b6d0;hpb=01b4157194cea512485414a4589d7c28a0249853;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/configure b/configure
index fe595163a52..592bf912795 100755
--- a/configure
+++ b/configure
@@ -12,14 +12,18 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
-  --without-libbanshee   Don't build with libbanshee"
-ac_help="$ac_help
   --enable-libada        Builds libada directory"
 ac_help="$ac_help
+  --with-mpfr-dir=PATH    Specify source directory for MPFR library"
+ac_help="$ac_help
+  --with-mpfr=PATH        Specify directory for installed MPFR library"
+ac_help="$ac_help
   --with-gmp-dir=PATH     Specify source directory for GMP library"
 ac_help="$ac_help
   --with-gmp=PATH         Specify directory for installed GMP library"
 ac_help="$ac_help
+  --enable-bootstrap[=lean]     Enable bootstrapping [no]"
+ac_help="$ac_help
   --enable-serial-[{host,target,build}-]configure
                           Force sequential configuration of
                           sub-packages for the host, target or build
@@ -541,7 +545,7 @@ fi
 
 
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+for ac_dir in ${GNUSYSTEM_AUX_DIR} $srcdir $srcdir/.. $srcdir/../..; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -587,7 +591,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:591: checking host system type" >&5
+echo "configure:595: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -608,7 +612,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:612: checking target system type" >&5
+echo "configure:616: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -626,7 +630,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:630: checking build system type" >&5
+echo "configure:634: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -681,7 +685,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:685: checking for a BSD compatible install" >&5
+echo "configure:689: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -733,59 +737,50 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
+echo $ac_n "checking whether ln works""... $ac_c" 1>&6
+echo "configure:742: checking whether ln works" >&5
+if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftestdata_t
+echo >conftestdata_f
+if ln conftestdata_f conftestdata_t 2>/dev/null
+then
+  acx_cv_prog_LN=ln
+else
+  acx_cv_prog_LN=no
+fi
+rm -f conftestdata_f conftestdata_t
 
-# Autoconf M4 include file defining utility macros for complex Canadian
-# cross builds.
-
- 
- 
- 
- 
-
-####
-# _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM 
-# or AC_INIT.
-# These demand that AC_CANONICAL_SYSTEM be called beforehand.
- 
-####
-# NCN_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but tries a prefix of the target, not the host.
-# Code is pretty much lifted from autoconf2.53.
-
- 
-
-####
-# NCN_STRICT_CHECK_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like AC_CHECK_TOOL, but requires the prefix if build!=host.
-
- 
-
-####
-# NCN_STRICT_CHECK_TARGET_TOOL(variable, prog-to-check-for,[value-if-not-found],[path])
-# Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target.
-
- 
-###
-# AC_PROG_CPP_WERROR
-# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
-# triggers warnings from the preprocessor.  Will be in autoconf 2.58.
-# For now, using this also overrides header checks to use only the
-# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
-# bit harder from here).
-# Eventually autoconf will default to checking headers with the compiler
-# instead, and we'll have to do this differently.
-
-# AC_PROG_CPP_WERROR
-
-# Test for GNAT.
-# We require the gnatbind program, and a compiler driver that
-# understands Ada.  We use the user's CC setting, already found.
-#
-# Sets the shell variable have_gnat to yes or no as appropriate, and
-# substitutes GNATBIND.
-
-
+fi
+if test $acx_cv_prog_LN = no; then
+  LN="cp"
+  echo "$ac_t""no, using $LN" 1>&6
+else
+  LN="$acx_cv_prog_LN"
+  echo "$ac_t""yes" 1>&6
+fi
 
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:766: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+  rm -f conftestdata
+  ac_cv_prog_LN_S="ln -s"
+else
+  ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
 
 
 ### we might need to use some other shell than /bin/sh for running subshells
@@ -884,9 +879,17 @@ fi
 # Double entries in build_configdirs, configdirs, or target_configdirs may
 # cause circular dependencies and break everything horribly.
 
+# these library is used by various programs built for the build
+# environment
+#
+build_libs="build-libiberty"
+
+# these tools are built for the build environment
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib libbanshee"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -931,19 +934,9 @@ target_tools="target-examples target-groff target-gperf target-rda"
 ## is important because configure will choke if they ever get through.
 ## ${configdirs} is directories we build using the host tools.
 ## ${target_configdirs} is directories we build using the target tools.
-#
 configdirs=`echo ${host_libs} ${host_tools}`
 target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
-  # This is the only build module.
-  build_modules=libiberty
-else
-  build_modules=
-fi
-
+build_configdirs=`echo ${build_libs} ${build_tools}`
 
 ################################################################################
 
@@ -1009,7 +1002,7 @@ fi
 case ${with_x} in
   yes | "") ;; # the default value for this tree is that X11 is available
   no)
-    skipdirs="${skipdirs} tk tix itcl libgui"
+    skipdirs="${skipdirs} tk itcl libgui"
     # We won't be able to build gdbtk without X.
     enable_gdbtk=no 
     ;;
@@ -1060,17 +1053,17 @@ case "${host}" in
     noconfigdirs="$noconfigdirs byacc"
     ;;
   i[3456789]86-*-vsta)
-    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
     ;;
   i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
-    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
     ;;
   i[3456789]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
     noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
     ;;
   i[3456789]86-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+    noconfigdirs="$noconfigdirs tk itcl libgui gdb"
     ;;
   *-*-cygwin*)
     noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
@@ -1079,31 +1072,16 @@ case "${host}" in
     noconfigdirs="$noconfigdirs rcs"
     ;;
   ppc*-*-pe)
-    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+    noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
     ;;
   *-*-darwin*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui"
+    noconfigdirs="$noconfigdirs tk itcl libgui"
     ;;
 esac
 
-# Check whether --with-libbanshee or --without-libbanshee was given.
-if test "${with_libbanshee+set}" = set; then
-  withval="$with_libbanshee"
-  :
-fi
-
-case ${with_libbanshee} in
-  no)
-    noconfigdirs="$noconfigdirs libbanshee" ;;
-  yes|"")
-    with_libbanshee=yes
-    ;;
-  *)
-    { echo "configure: error: --with-libbanshee can only be empty, "yes" or "no" (empty defaults to "yes"." 1>&2; exit 1; }
-esac
 
 # Check whether --enable-libada or --disable-libada was given.
 if test "${enable_libada+set}" = set; then
@@ -1136,12 +1114,24 @@ esac
 
 # Allow --disable-libmudflap to exclude target-libmudflap
 case $enable_libmudflap in
-yes | "")
-    # By default it's enabled
+yes)
     ;;
 no)
     noconfigdirs="$noconfigdirs target-libmudflap"
     ;;
+"")
+    case "${target}" in
+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+        # Enable libmudflap by default in GNU and friends.
+	;;
+    *-*-freebsd*)
+        # Enable libmudflap by default in FreeBSD.
+	;;
+    *)
+        # Disable it by default everywhere else.
+	noconfigdirs="$noconfigdirs target-libmudflap"
+	;;
+    esac
 esac
 
 
@@ -1151,16 +1141,15 @@ case "${target}" in
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
-    noconfigdirs="$noconfigdirs target-libobjc"
     ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
-    noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
-  *-*-freebsd* | *-*-kfreebsd*-gnu)
+  *-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
 	&& test -f /usr/local/include/gmp.h; then
@@ -1196,8 +1185,8 @@ case "${target}" in
 	;;
     esac
     ;;
-  *-*-netware)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -1235,7 +1224,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     noconfigdirs="$noconfigdirs target-examples"
     noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
-    noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+    noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
     noconfigdirs="$noconfigdirs expect dejagnu"
     # the C++ libraries don't build on top of CE's C libraries
     noconfigdirs="$noconfigdirs target-libstdc++-v3"
@@ -1252,9 +1241,12 @@ case "${target}" in
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+  arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
     ;;
+  arm*-*-symbianelf*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+    ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
@@ -1288,6 +1280,9 @@ case "${target}" in
   cris-*-*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;
+  crx-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss target-libstdc++-v3 target-mudflap ${libgcj}"
+    ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
@@ -1330,11 +1325,11 @@ case "${target}" in
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
-    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+    noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+    noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
   i[3456789]86-*-coff | i[3456789]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -1365,20 +1360,25 @@ case "${target}" in
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
       i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
          ;;
     esac
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
     noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
-    # always build newlib.
-    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    # always build newlib if winsup directory is present.
+    if test -d "$srcdir/winsup"
+    then
+      skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    else
+      echo "Warning: winsup is missing so newlib can't be built."
+    fi
 
     # Can't build gdb for Cygwin if not native.
     case "${host}" in
       *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
          ;;
     esac
     ;;    
@@ -1434,13 +1434,13 @@ case "${target}" in
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
@@ -1546,7 +1546,7 @@ case "${target}" in
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
-  *-*-linux*)
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-lynxos*)
@@ -1705,6 +1705,9 @@ case "${host}" in
     tentative_cc="/usr/cygnus/progressive/bin/gcc"
     host_makefile_frag="config/mh-lynxrs6k"
     ;;
+  powerpc-*-darwin*)
+    host_makefile_frag="config/mh-ppc-darwin"
+    ;;
   *-*-lynxos*)
     # /bin/cc is less than useful for our purposes.  Always use GCC
     tentative_cc="/bin/gcc"
@@ -1738,7 +1741,6 @@ if test "${build}" != "${host}" ; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
 
-  BISON=${BISON-bison}
   CC=${CC-${host_alias}-gcc}
   CFLAGS=${CFLAGS-"-g -O2"}
   CXX=${CXX-${host_alias}-c++}
@@ -1750,47 +1752,6 @@ if test "${build}" != "${host}" ; then
   GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
   BUILD_PREFIX=${build_alias}-
   BUILD_PREFIX_1=${build_alias}-
-  MAKEINFO=${MAKEINFO-makeinfo}
-
-  if test -z "${YACC}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/bison; then
-	YACC="bison -y"
-	break
-      fi
-      if test -f $dir/byacc; then
-	YACC=byacc
-	break
-      fi
-      if test -f $dir/yacc; then
-	YACC=yacc
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    if test -z "${YACC}" ; then
-      YACC="bison -y"
-    fi
-  fi
-
-  if test -z "${LEX}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/flex; then
-	LEX=flex
-	break
-      fi
-      if test -f $dir/lex; then
-	LEX=lex
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    LEX=${LEX-flex}
-  fi
 
 else
   # Set reasonable default values for some tools even if not Canadian.
@@ -1801,100 +1762,15 @@ else
   # in Makefile.in, so can still be overridden by fragments.
   # This is all going to change when we autoconfiscate...
 
-  BISON="\$(USUAL_BISON)"
   CC_FOR_BUILD="\$(CC)"
   GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
   BUILD_PREFIX=
   BUILD_PREFIX_1=loser-
-  MAKEINFO="\$(USUAL_MAKEINFO)"
-  LEX="\$(USUAL_LEX)"
-  YACC="\$(USUAL_YACC)"
-
-  # If CC is still not set, try to get gcc.
-  cc_prog_is_gcc=
-  if test -z "${CC}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/gcc; then
-	CC="gcc"
-	cc_prog_is_gcc=yes
-	echo 'void f(){}' > conftest.c
-	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
-	  CFLAGS=${CFLAGS-"-g -O2"}
-	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
-	else
-	  CFLAGS=${CFLAGS-"-O2"}
-	  CXXFLAGS=${CXXFLAGS-"-O2"}
-	fi
-	rm -f conftest*
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    CC=${CC-cc}
-  else
-    # Determine if we are using gcc.
-    cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-    if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
-      cc_prog_is_gcc=yes
-    fi
-    rm -f conftest.c
-    if test -z "${CFLAGS}"; then
-      # Here CC is set but CFLAGS is not.  Use a quick hack to use -O2 if CC
-      # is set to a version of gcc.
-      if test "$cc_prog_is_gcc" = yes; then
-	echo 'void f(){}' > conftest.c
-	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
-	  CFLAGS=${CFLAGS-"-g -O2"}
-	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
-	else
-	  CFLAGS=${CFLAGS-"-O2"}
-	  CXXFLAGS=${CXXFLAGS-"-O2"}
-	fi
-	rm -f conftest*
-      fi
-    fi
-  fi
-
-  # We must set the default linker to the linker used by gcc for the correct
-  # operation of libtool.  If LD is not defined and we are using gcc, try to
-  # set the LD default to the ld used by gcc.
-  if test -z "$LD"; then
-    if test "$cc_prog_is_gcc" = yes; then
-      case $build in
-      *-*-mingw*)
-	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
-      *)
-	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
-      esac
-      case $gcc_prog_ld in
-      # Accept absolute paths.
-      [\\/]* | [A-Za-z]:[\\/]*)
-        LD="$gcc_prog_ld" ;;
-      esac
-    fi
-  fi
-
-  CXX=${CXX-"c++"}
-  CFLAGS=${CFLAGS-"-g"}
-  CXXFLAGS=${CXXFLAGS-"-g -O2"}
-fi
 
-if test $host != $build; then
-  ac_tool_prefix=${host_alias}-
-else
-  ac_tool_prefix=
-fi
-
-# Extract the first word of "gcc", so it can be a program name with args.
+  # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1898: checking for $ac_word" >&5
+echo "configure:1774: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1924,7 +1800,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1928: checking for $ac_word" >&5
+echo "configure:1804: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1975,7 +1851,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1979: checking for $ac_word" >&5
+echo "configure:1855: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2007,7 +1883,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1887: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2018,12 +1894,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2022 "configure"
+#line 1898 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2049,12 +1925,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2053: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1929: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2058: checking whether we are using GNU C" >&5
+echo "configure:1934: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2063,7 +1939,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2067: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2082,7 +1958,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2086: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1962: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2114,11 +1990,42 @@ else
 fi
 
 
+  # We must set the default linker to the linker used by gcc for the correct
+  # operation of libtool.  If LD is not defined and we are using gcc, try to
+  # set the LD default to the ld used by gcc.
+  if test -z "$LD"; then
+    if test "$GCC" = yes; then
+      case $build in
+      *-*-mingw*)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
+      *)
+	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;;
+      esac
+      case $gcc_prog_ld in
+      # Accept absolute paths.
+      [\\/]* | [A-Za-z]:[\\/]*)
+        LD="$gcc_prog_ld" ;;
+      esac
+    fi
+  fi
+
+  CXX=${CXX-"c++"}
+  CFLAGS=${CFLAGS-"-g"}
+  CXXFLAGS=${CXXFLAGS-"-g -O2"}
+fi
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+
 
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2122: checking for $ac_word" >&5
+echo "configure:2029: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2150,7 +2057,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2154: checking for $ac_word" >&5
+echo "configure:2061: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2183,7 +2090,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2187: checking whether compiler driver understands Ada" >&5
+echo "configure:2094: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2216,7 +2123,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2220: checking how to compare bootstrapped objects" >&5
+echo "configure:2127: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2246,10 +2153,38 @@ do_compare="$gcc_cv_prog_cmp_skip"
 
 
 
-# Check for GMP
+# Check for GMP and MPFR
 gmplibs=
 gmpinc=
 have_gmp=yes
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+# Check whether --with-mpfr-dir or --without-mpfr-dir was given.
+if test "${with_mpfr_dir+set}" = set; then
+  withval="$with_mpfr_dir"
+  :
+fi
+
+
+if test "x$with_mpfr_dir" != x; then
+  gmpinc="-I$with_mpfr_dir/mpfr"
+  gmplibs="$with_mpfr_dir/libmpfr.a"
+else
+  gmplibs="-lmpfr"
+fi
+
+# Check whether --with-mpfr or --without-mpfr was given.
+if test "${with_mpfr+set}" = set; then
+  withval="$with_mpfr"
+  :
+fi
+
+
+if test "x$with_mpfr" != x; then
+  gmplibs="-L$with_mpfr/lib $gmplibs"
+  gmpinc="-I$with_mpfr/include"
+fi
+
 # Specify a location for gmp
 # Check whether --with-gmp-dir or --without-gmp-dir was given.
 if test "${with_gmp_dir+set}" = set; then
@@ -2258,14 +2193,16 @@ if test "${with_gmp_dir+set}" = set; then
 fi
 
 
-if test "x$with_gmp_dir" != x && test -f "$with_gmp_dir/gmp.h"; then
-  gmpinc="-I$with_gmp_dir"
+if test "x$with_gmp_dir" != x; then
+  gmpinc="$gmpinc -I$with_gmp_dir"
   if test -f "$with_gmp_dir/.libs/libgmp.a"; then
-    gmplibs="$with_gmp_dir/.libs/libgmp.a"
+    gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
   elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
-    gmplibs="$with_gmp_dir/_libs/libgmp.a"
+    gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
   fi
   # One of the later tests will catch the error if neither library is present.
+else
+  gmplibs="$gmplibs -lgmp"
 fi
 
 # Check whether --with-gmp or --without-gmp was given.
@@ -2275,23 +2212,18 @@ if test "${with_gmp+set}" = set; then
 fi
 
 
-if test "x$with_gmp" != x && test -d "$with_gmp"; then
-  gmplibs="-L$with_gmp/lib -lgmp"
-  gmpinc="-I$with_gmp/include"
-fi
-
-# Use system gmp if nothing else specified
-if test "x$gmplibs" = x; then
-  gmplibs="-lgmp"
+if test "x$with_gmp" != x; then
+  gmplibs="-L$with_gmp/lib $gmplibs"
+  gmpinc="-I$with_gmp/include $gmpinc"
 fi
 
 saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2293: checking for correct version of gmp.h" >&5
+echo "configure:2225: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2295 "configure"
+#line 2227 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2302,7 +2234,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2306: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2238: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2314,20 +2246,21 @@ fi
 rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
-  echo $ac_n "checking for mpf_init in -lgmp""... $ac_c" 1>&6
-echo "configure:2319: checking for mpf_init in -lgmp" >&5
+  echo $ac_n "checking for MPFR""... $ac_c" 1>&6
+echo "configure:2251: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2324 "configure"
+#line 2256 "configure"
 #include "confdefs.h"
 #include <gmp.h>
+#include <mpfr.h>
 int main() {
-mpf_t n; mpf_init(n);
+mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2341,6 +2274,7 @@ rm -f conftest*
   CFLAGS="$saved_CFLAGS"
 fi
 
+# Flags needed for both GMP and/or MPFR
 
 
 
@@ -2401,6 +2335,7 @@ if test -d ${srcdir}/gcc; then
 
   new_enable_languages=c
   missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+  potential_languages=c
 
   for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
     case ${lang_frag} in
@@ -2416,14 +2351,15 @@ if test -d ${srcdir}/gcc; then
         lang_dirs=
         boot_language=
         build_by_default=
-	need_gmp=
+        need_gmp=
         . ${lang_frag}
+        potential_languages="${potential_languages},${language}"
         # This is quite sensitive to the ordering of the case statement arms.
         case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
           *::*:*)
             echo "${lang_frag} doesn't set \$language." 1>&2
             exit 1
-	    ;;
+            ;;
           *:ada:no:*)
             # Ada was requested with no preexisting GNAT.  Disable unconditionally.
             add_this_lang=no
@@ -2434,9 +2370,9 @@ if test -d ${srcdir}/gcc; then
             ;;
           *,all,*:*:*:no)
             # 'all' was selected, but this is not a default language
-	    # so do not include it.
+            # so do not include it.
             add_this_lang=no
-	    ;;
+            ;;
           *,all,*:*:*:*)
             # 'all' was selected and this is a default language; include it.
             add_this_lang=yes
@@ -2446,10 +2382,17 @@ if test -d ${srcdir}/gcc; then
             ;;
         esac
 
-	# Disable language that need GMP if it isn't available.
-	if test  x"$need_gmp" = xyes && test x"$have_gmp" = xno; then
-	  add_this_lang=no
-	fi
+        # Disable languages that need GMP if it isn't available.
+        case ,${enable_languages},:${have_gmp}:${need_gmp} in
+          *,${language},*:no:yes)
+            # Specifically requested language; tell them.
+            { echo "configure: error: GMP with MPFR support is required to build $language" 1>&2; exit 1; }
+            ;;
+          *:no:yes)
+            # Silently disable.
+            add_this_lang=no
+            ;;
+        esac
         
 	case $add_this_lang in
 	  no)
@@ -2474,7 +2417,8 @@ if test -d ${srcdir}/gcc; then
   missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
   if test "x$missing_languages" != x; then
     { echo "configure: error: 
-The following requested languages were not found: ${missing_languages}" 1>&2; exit 1; }
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}" 1>&2; exit 1; }
   fi
 
   if test "x$new_enable_languages" != "x$enable_languages"; then
@@ -2533,6 +2477,15 @@ fi
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+  j=`echo $i | sed -e s/build-//g` 
+  if test -f ${srcdir}/$j/configure ; then
+    build_configdirs="${build_configdirs} $i"
+  fi
+done
+
 configdirs_all="$configdirs"
 configdirs=
 for i in ${configdirs_all} ; do
@@ -2540,6 +2493,7 @@ for i in ${configdirs_all} ; do
     configdirs="${configdirs} $i"
   fi
 done
+
 target_configdirs_all="$target_configdirs"
 target_configdirs=
 for i in ${target_configdirs_all} ; do
@@ -2566,7 +2520,7 @@ if test -n "${notsupp}" && test -z "${norecursion}" ; then
 	  appdirs=""
 	  break
 	fi
-	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
 	  appdirs=""
 	  break
 	fi
@@ -2664,14 +2618,11 @@ extra_nmflags_for_target=
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  i[3456789]86-*-netware*)
+  *-*-netware*)
     target_makefile_frag="config/mt-netware"
     ;;
-  powerpc-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
-  *-*-linux*)
-    target_makefile_frag="config/mt-linux"
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+    target_makefile_frag="config/mt-gnu"
     ;;
   *-*-aix4.[3456789]* | *-*-aix[56789].*)
     # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
@@ -2752,10 +2703,6 @@ if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-
   extra_host_args="$extra_host_args --with-newlib"
 fi
 
-if test x${with_libbanshee} = xyes && echo " ${configdirs} " | grep " libbanshee " >/dev/null 2>&1; then
-  extra_host_args="$extra_host_args --with-libbanshee"
-fi
-
 # Default to using --with-stabs for certain targets.
 if test x${with_stabs} = x ; then
   case "${target}" in
@@ -2781,113 +2728,219 @@ esac
 tooldir='${exec_prefix}'/${target_alias}
 build_tooldir=${tooldir}
 
-# Generate default definitions for YACC, M4, LEX.  These are used if the
-# Makefile can't locate these programs in objdir.
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine.  These are used if the Makefile can't locate these
+# programs in objdir.
 MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2741: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CONFIGURED_BISON"; then
+  ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CONFIGURED_BISON="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
+if test -n "$CONFIGURED_BISON"; then
+  echo "$ac_t""$CONFIGURED_BISON" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_BISON" && break
+done
+test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
+
 for ac_prog in 'bison -y' byacc yacc
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2793: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_YACC'+set}'`\" = set"; then
+echo "configure:2776: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$DEFAULT_YACC"; then
-  ac_cv_prog_DEFAULT_YACC="$DEFAULT_YACC" # Let the user override the test.
+  if test -n "$CONFIGURED_YACC"; then
+  ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DEFAULT_YACC="$ac_prog"
+      ac_cv_prog_CONFIGURED_YACC="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-DEFAULT_YACC="$ac_cv_prog_DEFAULT_YACC"
-if test -n "$DEFAULT_YACC"; then
-  echo "$ac_t""$DEFAULT_YACC" 1>&6
+CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
+if test -n "$CONFIGURED_YACC"; then
+  echo "$ac_t""$CONFIGURED_YACC" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-test -n "$DEFAULT_YACC" && break
+test -n "$CONFIGURED_YACC" && break
 done
-test -n "$DEFAULT_YACC" || DEFAULT_YACC="$MISSING bison"
+test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
 
 for ac_prog in gm4 gnum4 m4
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2828: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_M4'+set}'`\" = set"; then
+echo "configure:2811: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CONFIGURED_M4"; then
+  ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CONFIGURED_M4="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
+if test -n "$CONFIGURED_M4"; then
+  echo "$ac_t""$CONFIGURED_M4" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_M4" && break
+done
+test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2846: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$DEFAULT_M4"; then
-  ac_cv_prog_DEFAULT_M4="$DEFAULT_M4" # Let the user override the test.
+  if test -n "$CONFIGURED_FLEX"; then
+  ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DEFAULT_M4="$ac_prog"
+      ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-DEFAULT_M4="$ac_cv_prog_DEFAULT_M4"
-if test -n "$DEFAULT_M4"; then
-  echo "$ac_t""$DEFAULT_M4" 1>&6
+CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
+if test -n "$CONFIGURED_FLEX"; then
+  echo "$ac_t""$CONFIGURED_FLEX" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-test -n "$DEFAULT_M4" && break
+test -n "$CONFIGURED_FLEX" && break
 done
-test -n "$DEFAULT_M4" || DEFAULT_M4="$MISSING m4"
+test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
 
 for ac_prog in flex lex
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2863: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DEFAULT_LEX'+set}'`\" = set"; then
+echo "configure:2881: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$DEFAULT_LEX"; then
-  ac_cv_prog_DEFAULT_LEX="$DEFAULT_LEX" # Let the user override the test.
+  if test -n "$CONFIGURED_LEX"; then
+  ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_DEFAULT_LEX="$ac_prog"
+      ac_cv_prog_CONFIGURED_LEX="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-DEFAULT_LEX="$ac_cv_prog_DEFAULT_LEX"
-if test -n "$DEFAULT_LEX"; then
-  echo "$ac_t""$DEFAULT_LEX" 1>&6
+CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
+if test -n "$CONFIGURED_LEX"; then
+  echo "$ac_t""$CONFIGURED_LEX" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-test -n "$DEFAULT_LEX" && break
+test -n "$CONFIGURED_LEX" && break
 done
-test -n "$DEFAULT_LEX" || DEFAULT_LEX="$MISSING flex"
+test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2916: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CONFIGURED_MAKEINFO"; then
+  ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
+if test -n "$CONFIGURED_MAKEINFO"; then
+  echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$CONFIGURED_MAKEINFO" && break
+done
+test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
 
 
 # Create a .gdbinit file which runs the one in srcdir
@@ -2971,17 +3024,7 @@ esac
 # Record target_configdirs and the configure arguments for target and
 # build configuration in Makefile.
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-
-# This is the final value for target_configdirs.  configdirs already
-# has its final value, as does build_modules.  It's time to create some 
-# lists of valid targets.
-
-all_build_modules=
-configure_build_modules=
-for module in ${build_modules} ; do
-  all_build_modules=all-build-${module}
-  configure_build_modules=configure-build-${module}
-done
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
 
 # Determine whether gdb needs tk/tcl or not.
 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
@@ -2991,7 +3034,7 @@ done
 # leave out the maybe dependencies when enable_gdbtk is false.  I'm not
 # 100% sure that that's safe though.
 
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
 case "$enable_gdbtk" in
   no)
     GDB_TK="" ;;
@@ -3022,7 +3065,71 @@ esac
 # to maintain later.  In this particular case, you just have to be careful
 # not to nest @if/@endif pairs, because configure will not warn you at all.
 
-for module in ${build_modules} ; do
+# Check whether --enable-bootstrap or --disable-bootstrap was given.
+if test "${enable_bootstrap+set}" = set; then
+  enableval="$enable_bootstrap"
+  :
+else
+  enable_bootstrap=default
+fi
+
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+  *gcc*) have_compiler=yes ;;
+  *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    # This will become 'yes'
+    enable_bootstrap=no ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes | yes:$build:$build:lean)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes | yes:*:*:lean)
+    echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
+    ;;
+
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes | no:*:*:lean)
+    { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
+
+  # Fail if wrong command line
+  *)
+    { echo "configure: error: invalid option for --enable-bootstrap" 1>&2; exit 1; }
+    ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+  yes)
+    bootstrap_lean='#'
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  lean)
+    bootstrap_lean=''
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  no)
+    default_target=all
+    bootstrap_suffix=no-bootstrap ;;
+esac
+
+
+
+for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
@@ -3030,7 +3137,9 @@ for module in ${build_modules} ; do
   fi
   extrasub="$extrasub
 /^@if build-$module\$/d
-/^@endif build-$module\$/d"
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
 done
 for module in ${configdirs} ; do
   if test -z "${no_recursion}" \
@@ -3040,7 +3149,9 @@ for module in ${configdirs} ; do
   fi
   extrasub="$extrasub
 /^@if $module\$/d
-/^@endif $module\$/d"
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
 done
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
@@ -3050,8 +3161,11 @@ for module in ${target_configdirs} ; do
   fi
   extrasub="$extrasub
 /^@if target-$module\$/d
-/^@endif target-$module\$/d"
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
 done
+
 extrasub="$extrasub
 /^@if /,/^@endif /d"
 
@@ -3326,7 +3440,7 @@ elif test -d ${srcdir}/gcc; then
 elif test "$host" = "$target"; then
   GFORTRAN_FOR_TARGET='gfortran'
 else
-  GFORTRAN_FOR_TARGET=`echo gfortran | sed -e 's/x/x/' ${program_transform_name}`
+  GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
 fi
 case $GFORTRAN_FOR_TARGET in
 *' $(FLAGS_FOR_TARGET)') ;;
@@ -3381,10 +3495,13 @@ CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
 RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
 
 # Makefile fragments.
-host_makefile_frag=${srcdir}/${host_makefile_frag}
-target_makefile_frag=${srcdir}/${target_makefile_frag}
-alphaieee_frag=${srcdir}/${alphaieee_frag}
-ospace_frag=${srcdir}/${ospace_frag}
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+  eval fragval=\$$frag
+  if test $fragval != /dev/null; then
+    eval $frag=${srcdir}/$fragval
+  fi
+done
 
 
 
@@ -3407,7 +3524,6 @@ ospace_frag=${srcdir}/${ospace_frag}
 
 
 
-
 # Host module lists & subconfigure args.
 
 
@@ -3420,10 +3536,6 @@ ospace_frag=${srcdir}/${ospace_frag}
 
 
 
-
-
-
-
 # Host tools.
 ncn_tool_prefix=
 test -n "$host_alias" && ncn_tool_prefix=$host_alias-
@@ -3434,7 +3546,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3438: checking for $ac_word" >&5
+echo "configure:3550: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3467,7 +3579,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3471: checking for $ac_word" >&5
+echo "configure:3583: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3506,7 +3618,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3510: checking for $ac_word" >&5
+echo "configure:3622: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3539,7 +3651,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3543: checking for $ac_word" >&5
+echo "configure:3655: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3578,7 +3690,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3582: checking for $ac_word" >&5
+echo "configure:3694: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3611,7 +3723,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3615: checking for $ac_word" >&5
+echo "configure:3727: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3650,7 +3762,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3654: checking for $ac_word" >&5
+echo "configure:3766: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3683,7 +3795,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3687: checking for $ac_word" >&5
+echo "configure:3799: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3722,7 +3834,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3726: checking for $ac_word" >&5
+echo "configure:3838: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3755,7 +3867,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3759: checking for $ac_word" >&5
+echo "configure:3871: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3794,7 +3906,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3798: checking for $ac_word" >&5
+echo "configure:3910: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3827,7 +3939,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3831: checking for $ac_word" >&5
+echo "configure:3943: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3866,7 +3978,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3870: checking for $ac_word" >&5
+echo "configure:3982: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3899,7 +4011,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3903: checking for $ac_word" >&5
+echo "configure:4015: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3938,7 +4050,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3942: checking for $ac_word" >&5
+echo "configure:4054: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3971,7 +4083,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3975: checking for $ac_word" >&5
+echo "configure:4087: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4010,7 +4122,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4014: checking for $ac_word" >&5
+echo "configure:4126: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4043,7 +4155,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4047: checking for $ac_word" >&5
+echo "configure:4159: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4084,15 +4196,12 @@ fi
 
 
 
-
-
-
 # Target tools.
  if test -n "$ncn_target_tool_prefix"; then
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4096: checking for $ac_word" >&5
+echo "configure:4205: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4125,7 +4234,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4129: checking for $ac_word" >&5
+echo "configure:4238: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4164,7 +4273,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4168: checking for $ac_word" >&5
+echo "configure:4277: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4197,7 +4306,7 @@ if test -z "$ac_cv_prog_CONFIGURED_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4201: checking for $ac_word" >&5
+echo "configure:4310: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4236,7 +4345,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4240: checking for $ac_word" >&5
+echo "configure:4349: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4269,7 +4378,7 @@ if test -z "$ac_cv_prog_CONFIGURED_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4273: checking for $ac_word" >&5
+echo "configure:4382: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4308,7 +4417,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4312: checking for $ac_word" >&5
+echo "configure:4421: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4341,7 +4450,7 @@ if test -z "$ac_cv_prog_CONFIGURED_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4345: checking for $ac_word" >&5
+echo "configure:4454: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4380,7 +4489,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4384: checking for $ac_word" >&5
+echo "configure:4493: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4413,7 +4522,7 @@ if test -z "$ac_cv_prog_CONFIGURED_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4417: checking for $ac_word" >&5
+echo "configure:4526: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4452,7 +4561,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4456: checking for $ac_word" >&5
+echo "configure:4565: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4485,7 +4594,7 @@ if test -z "$ac_cv_prog_CONFIGURED_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4489: checking for $ac_word" >&5
+echo "configure:4598: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4524,7 +4633,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4528: checking for $ac_word" >&5
+echo "configure:4637: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4557,7 +4666,7 @@ if test -z "$ac_cv_prog_CONFIGURED_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4561: checking for $ac_word" >&5
+echo "configure:4670: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_CONFIGURED_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4642,7 +4751,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4646: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:4755: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4685,6 +4794,42 @@ case $build in
 esac
 
 
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
+# possible, however, we can resort to mv.
+echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
+echo "configure:4802: checking if symbolic links between directories work" >&5
+if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "${LN_S}" = "ln -s" \
+   && mkdir confdir.s1 \
+   && ln -s confdir.s1 confdir.s2 \
+   && echo timestamp1 > confdir.s1/conftest.1 \
+   && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+   && echo timestamp2 > confdir.s2/conftest.2 \
+   && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+   && rm -f confdir.s2; then
+  gcc_cv_prog_ln_s_dir=yes
+else
+  gcc_cv_prog_ln_s_dir=yes
+fi
+rm -rf confdir.s1 confdir.s2
+fi
+
+echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
+
+case ${gcc_cv_prog_ln_s_dir} in
+  yes)
+    CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+    UNDO_LINK_TO_DIR='rm -f $$1' ;;
+  *)
+    CREATE_LINK_TO_DIR='mv $$1 $$2'
+    UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+
+
+
 # Enable -Werror in bootstrap stage2 and later.
 # Change the default to "no" on release branches.
 # Check whether --enable-werror or --disable-werror was given.
@@ -4864,6 +5009,8 @@ s%@build_os@%$build_os%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@LN@%$LN%g
+s%@LN_S@%$LN_S%g
 s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
 s%@build_subdir@%$build_subdir%g
 s%@host_subdir@%$host_subdir%g
@@ -4874,9 +5021,14 @@ s%@do_compare@%$do_compare%g
 s%@gmplibs@%$gmplibs%g
 s%@gmpinc@%$gmpinc%g
 s%@stage1_languages@%$stage1_languages%g
-s%@DEFAULT_YACC@%$DEFAULT_YACC%g
-s%@DEFAULT_M4@%$DEFAULT_M4%g
-s%@DEFAULT_LEX@%$DEFAULT_LEX%g
+s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
+s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
+s%@CONFIGURED_M4@%$CONFIGURED_M4%g
+s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
+s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
+s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
+s%@bootstrap_lean@%$bootstrap_lean%g
+s%@default_target@%$default_target%g
 /@serialization_dependencies@/r $serialization_dependencies
 s%@serialization_dependencies@%%g
 /@host_makefile_frag@/r $host_makefile_frag
@@ -4899,17 +5051,12 @@ s%@GDB_TK@%$GDB_TK%g
 s%@gxx_include_dir@%$gxx_include_dir%g
 s%@libstdcxx_incdir@%$libstdcxx_incdir%g
 s%@build_configargs@%$build_configargs%g
-s%@configure_build_modules@%$configure_build_modules%g
-s%@all_build_modules@%$all_build_modules%g
+s%@build_configdirs@%$build_configdirs%g
 s%@host_configargs@%$host_configargs%g
 s%@configdirs@%$configdirs%g
 s%@target_configargs@%$target_configargs%g
 s%@target_configdirs@%$target_configdirs%g
-s%@BISON@%$BISON%g
 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
-s%@LEX@%$LEX%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@YACC@%$YACC%g
 s%@config_shell@%$config_shell%g
 s%@AR@%$AR%g
 s%@ncn_cv_AR@%$ncn_cv_AR%g
@@ -4965,6 +5112,8 @@ s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
 s%@stage1_cflags@%$stage1_cflags%g
+s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
+s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
 s%@stage2_werror_flag@%$stage2_werror_flag%g
 
 CEOF