X-Git-Url: http://git.sourceforge.jp/view?a=blobdiff_plain;f=Makefile.in;h=94f0a35f669c980f96291f93f5bcaa20a558625f;hb=fd4d4fc69bda78d2c2fe9f3cf90cbc0b9ca6b7f4;hp=702550a08d77df7c06cc90539664a1bc08d96c18;hpb=319727714e2aa18749dd90cfb9490730dd9524cd;p=pf3gnuchains%2Fgcc-fork.git

diff --git a/Makefile.in b/Makefile.in
index 702550a08d7..94f0a35f669 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -18,6 +18,12 @@
 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 #
 
+# Tell GNU make 3.79 not to run the top level in parallel.  This 
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
 srcdir = .
 
 prefix = /usr/local
@@ -94,8 +100,6 @@ LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
 PICFLAG = 
 PICFLAG_FOR_TARGET = 
 
-CHILLFLAGS = $(CFLAGS)
-CHILL_LIB = -lchill
 CXX = c++
 
 # Use -O2 to stress test the compiler.
@@ -142,7 +146,7 @@ M4 = `if [ -f $$r/m4/m4 ] ; \
 
 # For an installed makeinfo, we require it to be from texinfo 4 or
 # higher, else we use the "missing" dummy.
-MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
+MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 	then echo $$r/texinfo/makeinfo/makeinfo ; \
 	else if (makeinfo --version \
 	  | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \
@@ -172,7 +176,7 @@ OTHERS =
 
 # This is set by the configure script to the list of directories which
 # should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libobjc
 
 # Target libraries are put under this directory:
 # Changed by configure to $(target_alias) if cross.
@@ -229,7 +233,6 @@ INSTALL_TARGET_CROSS = installdirs \
 # Should be substed by configure.in
 FLAGS_FOR_TARGET =
 CC_FOR_TARGET =
-CHILL_FOR_TARGET =
 CXX_FOR_TARGET =
 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
 GCJ_FOR_TARGET =
@@ -353,9 +356,6 @@ BASE_FLAGS_TO_PASS = \
 	"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 	"CFLAGS=$(CFLAGS)" \
 	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"CHILLFLAGS=$(CHILLFLAGS)" \
-	"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
-	"CHILL_LIB=$(CHILL_LIB)" \
 	"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
 	"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 	"CXXFLAGS=$(CXXFLAGS)" \
@@ -783,7 +783,6 @@ ALL_TARGET_MODULES = \
 	all-target-librx \
 	all-target-newlib \
 	all-target-libf2c \
-	all-target-libchill \
 	all-target-libobjc \
 	all-target-libtermcap \
 	all-target-winsup \
@@ -807,7 +806,6 @@ CONFIGURE_TARGET_MODULES = \
 	configure-target-librx \
 	configure-target-newlib \
 	configure-target-libf2c \
-	configure-target-libchill \
 	configure-target-libobjc \
 	configure-target-libtermcap \
 	configure-target-winsup \
@@ -830,7 +828,6 @@ CHECK_TARGET_MODULES = \
 	check-target-libstdc++-v3 \
 	check-target-newlib \
 	check-target-libf2c \
-	check-target-libchill \
 	check-target-libobjc \
 	check-target-winsup \
 	check-target-libiberty \
@@ -847,7 +844,6 @@ INSTALL_TARGET_MODULES = \
 	install-target-libstdc++-v3 \
 	install-target-newlib \
 	install-target-libf2c \
-	install-target-libchill \
 	install-target-libobjc \
 	install-target-libtermcap \
 	install-target-winsup \
@@ -936,7 +932,6 @@ CLEAN_TARGET_MODULES = \
 	clean-target-librx \
 	clean-target-newlib \
 	clean-target-libf2c \
-	clean-target-libchill \
 	clean-target-libobjc \
 	clean-target-winsup \
 	clean-target-libgloss \
@@ -1116,8 +1111,11 @@ clean-target-libgcc:
 
 # Check target.
 
-.PHONY: check
-check: $(CHECK_MODULES) \
+.PHONY: check do-check
+check:
+	$(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
 	$(CHECK_TARGET_MODULES) \
 	$(CHECK_X11_MODULES) \
 	check-gcc
@@ -1711,7 +1709,7 @@ all-bash:
 all-bfd: all-libiberty all-intl
 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
 all-bison: all-texinfo
-configure-target-boehm-gc: $(ALL_GCC_CXX) configure-target-qthreads
+configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads
 all-target-boehm-gc: configure-target-boehm-gc
 configure-target-bsp: $(ALL_GCC_C)
 all-target-bsp: configure-target-bsp
@@ -1767,7 +1765,7 @@ all-build-libiberty: configure-build-libiberty
 
 configure-target-libffi: $(ALL_GCC_C) 
 all-target-libffi: configure-target-libffi
-configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
+configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
 all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
 configure-target-librx: $(ALL_GCC_C)
 all-target-librx: configure-target-librx
@@ -1778,8 +1776,6 @@ all-target-libstub: configure-target-libstub
 all-libtool:
 configure-target-libf2c: $(ALL_GCC_C)
 all-target-libf2c: configure-target-libf2c all-target-libiberty
-configure-target-libchill: $(ALL_GCC_C)
-all-target-libchill: configure-target-libchill all-target-libiberty
 configure-target-libobjc: $(ALL_GCC_C)
 all-target-libobjc: configure-target-libobjc all-target-libiberty
 all-m4: all-libiberty all-texinfo
@@ -1803,7 +1799,7 @@ all-send-pr: all-prms
 all-shellutils:
 all-sid: all-tcl all-tk
 all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
-all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
 all-tar: all-libiberty
 all-tcl:
 all-tcl8.1:
@@ -1823,9 +1819,9 @@ all-zip:
 all-zlib:
 configure-target-zlib: $(ALL_GCC_C)
 all-target-zlib: configure-target-zlib
-all-fastjar: all-zlib
+all-fastjar: all-zlib all-libiberty
 configure-target-fastjar: configure-target-zlib
-all-target-fastjar: configure-target-fastjar all-target-zlib
+all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
 configure-target-libiberty: $(ALL_GCC_C)
 all-target-libiberty: configure-target-libiberty
 all-target: $(ALL_TARGET_MODULES)
@@ -1884,7 +1880,9 @@ DEVO_SUPPORT= README Makefile.in configure configure.in \
 # ChangeLog omitted because it may refer to files which are not in this
 # distribution (perhaps it would be better to include it anyway).
 ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
-	make-stds.texi standards.info*
+	make-stds.texi standards.info* configure.texi configure.info* \
+	configbuild.* configdev.*
+
 
 # When you use `make setup-dirs' or `make taz' you should always redefine
 # this macro.
@@ -1892,10 +1890,16 @@ SUPPORT_FILES = list-of-support-files-for-tool-in-question
 
 # NOTE: No double quotes in the below.  It is used within shell script
 # as VER="$(VER)"
-VER = `	if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
 	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
-	else \
+	elif test -f $(TOOL)/version.in; then \
+	  head -1 $(TOOL)/version.in; \
+	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
 	  sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+	else \
+	  echo VERSION; \
 	fi`
 PACKAGE = $(TOOL)
 
@@ -1909,13 +1913,17 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-tar-bz2 \
+	$(MAKE) -f Makefile.in do-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-bz2 \
 		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(SUPPORT_FILES)"
 
-.PHONY: gdb-taz
-gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 	$(MAKE) -f Makefile.in do-proto-toplev \
 		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
 		MD5PROG="$(MD5PROG)" \
@@ -1928,7 +1936,18 @@ gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(SUPPORT_FILES)"
-	$(MAKE) -f Makefile.in do-tar-bz2 \
+	$(MAKE) -f Makefile.in do-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+	$(MAKE) -f Makefile.in gdb-tar \
+		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SUPPORT_FILES)"
+	$(MAKE) -f Makefile.in do-bz2 \
 		TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(SUPPORT_FILES)"
@@ -1987,15 +2006,25 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 	else true; fi
 	chmod -R og=u . || chmod og=u `find . -print`
 	#
+	# Create .gmo files from .po files.
+	for f in `find . -name '*.po' -type f -print`; do \
+	     msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+	done
+	#
 	-rm -f $(PACKAGE)-$(VER)
 	ln -s proto-toplev $(PACKAGE)-$(VER)
 
-.PHONY: do-tar-bz2
-do-tar-bz2:
-	echo "==> Making $(PACKAGE)-$(VER).tar.bz2"
-	-rm -f $(PACKAGE)-$(VER).tar.bz2
+.PHONY: do-tar
+do-tar:
+	echo "==> Making $(PACKAGE)-$(VER).tar"
+	-rm -f $(PACKAGE)-$(VER).tar
 	find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
 		| tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+	echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+	-rm -f $(PACKAGE)-$(VER).tar.bz2
 	$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
 
 .PHONY: do-md5sum
@@ -2052,9 +2081,14 @@ gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
 	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
 
-.PHONY: dejagnu.tar.bz2
 DEJAGNU_SUPPORT_DIRS=  tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
 dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
 	$(MAKE) -f Makefile.in taz TOOL=dejagnu \
 		MD5PROG="$(MD5PROG)" \
@@ -2066,6 +2100,11 @@ gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
 	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
 
 .PHONY: insight.tar.bz2
 INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
@@ -2073,6 +2112,11 @@ insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
 	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
 
 .PHONY: insight+dejagnu.tar.bz2
 INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
@@ -2080,6 +2124,11 @@ insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
 	$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+	$(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
 
 .PHONY: newlib.tar.bz2
 NEWLIB_SUPPORT_DIRS=libgloss